clockevents for 4.14
Subsystems (5)
Hi Thomas,
this pull request contains the following changes:
- Add the new imx-tpm driver (Dong Aisheng)
- Remove DT deprecated binding for Renesas (Magnus Damm)
- Remove error message on memory allocation (Markus Elfring)
Thanks.
-- Daniel
The following changes since commit 4e2a809703e2b2300438a425b0a3f2013b55fcc6:
Merge branch 'fortglx/4.14/time' of https://git.linaro.org/people/john.stultz/linux into timers/core (2017-08-20 11:46:46 +0200)
are available in the git repository at:
http://[email protected]/people/daniel.lezcano/linux.git clockevents/4.14
for you to fetch changes up to e261c31c7a06aa371a3fbef00b6bd8b5a12a5460:
clocksource/drivers/bcm2835: Remove message on memory allocation failure (2017-08-29 11:09:06 +0200)
----------------------------------------------------------------
Dong Aisheng (2):
dt-bindings: timer: Add nxp tpm timer binding doc clocksource/drivers/imx-tpm: Add imx tpm timer support
Magnus Damm (6):
devicetree: bindings: Remove sh7372 CMT binding
devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings
devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings
devicetree: bindings: Deprecate property, update example
devicetree: bindings: Remove unused 32-bit CMT bindings
devicetree: bindings: Remove deprecated properties
Markus Elfring (1):
clocksource/drivers/bcm2835: Remove message on memory allocation failure
Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt | 28 +++++++++++++++ Documentation/devicetree/bindings/timer/renesas,cmt.txt | 73 +++++++++++++++++---------------------- drivers/clocksource/Kconfig | 8 +++++ drivers/clocksource/Makefile | 1 + drivers/clocksource/bcm2835_timer.c | 1 - drivers/clocksource/timer-imx-tpm.c | 239 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 308 insertions(+), 42 deletions(-) create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt create mode 100644 drivers/clocksource/timer-imx-tpm.c
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH 1/9 dt-bindings: timer: Add nxp tpm timer binding doc
From: Dong Aisheng <[email protected]>
Adding NXP Low Power Timer/Pulse Width Modulation Module (TPM) binding doc.
--- .../devicetree/bindings/timer/nxp,tpm-timer.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt new file +28 -0
@@ -0,0 +1,28 @@ +NXP Low Power Timer/Pulse Width Modulation Module (TPM) + +The Timer/PWM Module (TPM) supports input capture, output compare, +and the generation of PWM signals to control electric motor and power +management applications. The counter, compare and capture registers +are clocked by an asynchronous clock that can remain enabled in low +power modes. TPM can support global counter bus where one TPM drives +the counter bus for the others, provided bit width is the same. + +Required properties: + +- compatible : should be "fsl,imx7ulp-tpm" +- reg : Specifies base physical address and size of the register sets + for the clock event device and clock source device. +- interrupts : Should be the clock event device interrupt. +- clocks : The clocks provided by the SoC to drive the timer, must contain + an entry for each entry in clock-names. +- clock-names : Must include the following entries: "igp" and "per". + +Example: +tpm5: tpm@40260000 { + compatible = "fsl,imx7ulp-tpm"; + reg = <0x40260000 0x1000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>, + <&clks IMX7ULP_CLK_LPTPM5>; + clock-names = "ipg", "per"; +};
Signature · 6 lines
2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH 2/9 clocksource/drivers/imx-tpm: Add imx tpm timer support
From: Dong Aisheng <[email protected]>
IMX Timer/PWM Module (TPM) supports both timer and pwm function while this patch only adds the timer support. PWM would be added later.
The TPM counter, compare and capture registers are clocked by an asynchronous clock that can remain enabled in low power modes.
NOTE: We observed in a very small probability, the bus fabric contention between GPU and A7 may results a few cycles delay of writing CNT registers which may cause the min_delta event got missed, so we need add a ETIME check here in case it happened.
--- drivers/clocksource/Kconfig | 8 ++ drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-imx-tpm.c | 239 ++++++++++++++++++++++++++++++++++++ 3 files changed, 248 insertions(+) create mode 100644 drivers/clocksource/timer-imx-tpm.c
drivers/clocksource/Kconfig +8 -0
@@ -598,6 +598,14 @@ config CLKSRC_IMX_GPT depends on ARM && CLKDEV_LOOKUP select CLKSRC_MMIO +config CLKSRC_IMX_TPM + bool "Clocksource using i.MX TPM" if COMPILE_TEST + depends on ARM && CLKDEV_LOOKUP && GENERIC_CLOCKEVENTS + select CLKSRC_MMIO + help + Enable this option to use IMX Timer/PWM Module (TPM) timer as + clocksource. + config CLKSRC_ST_LPC bool "Low power clocksource found in the LPC" if COMPILE_TEST select TIMER_OF if OF
drivers/clocksource/Makefile +1 -0
@@ -67,6 +67,7 @@ obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o obj-$(CONFIG_CLKSRC_TANGO_XTAL) += tango_xtal.o obj-$(CONFIG_CLKSRC_IMX_GPT) += timer-imx-gpt.o +obj-$(CONFIG_CLKSRC_IMX_TPM) += timer-imx-tpm.o obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o obj-$(CONFIG_H8300_TMR8) += h8300_timer8.o obj-$(CONFIG_H8300_TMR16) += h8300_timer16.o
drivers/clocksource/timer-imx-tpm.c new file +239 -0
239 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 3/9 devicetree: bindings: Remove sh7372 CMT binding
In reply to Daniel LezcanoFrom: Magnus Damm <[email protected]>
Remove the sh7372 CMT compat string to reduce maintenance burden.
It should be fine to break DT compatibility because:
1) The sh7372 SoC support has been removed from upstream
2) The sh7372 CMT DT binding was never part of upstream DTS
3) The CMT driver never matches on the sh7372 binding
--- Documentation/devicetree/bindings/timer/renesas,cmt.txt | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)
Documentation/devicetree/bindings/timer/renesas,cmt.txt +3 -9
@@ -14,32 +14,26 @@ Required Properties: - compatible: must contain one or more of the following: - "renesas,cmt-32-r8a7740" for the r8a7740 32-bit CMT (CMT0) - - "renesas,cmt-32-sh7372" for the sh7372 32-bit CMT - (CMT0) - "renesas,cmt-32-sh73a0" for the sh73a0 32-bit CMT (CMT0) - "renesas,cmt-32" for all 32-bit CMT without fast clock support - (CMT0 on sh7372, sh73a0 and r8a7740) + (CMT0 on sh73a0 and r8a7740) This is a fallback for the above renesas,cmt-32-* entries. - "renesas,cmt-32-fast-r8a7740" for the r8a7740 32-bit CMT with fast clock support (CMT[234]) - - "renesas,cmt-32-fast-sh7372" for the sh7372 32-bit CMT with fast - clock support (CMT[234]) - "renesas,cmt-32-fast-sh73a0" for the sh73A0 32-bit CMT with fast clock support (CMT[234]) - "renesas,cmt-32-fast" for all 32-bit CMT with fast clock support - (CMT[234] on sh7372, sh73a0 and r8a7740) + (CMT[234] on sh73a0 and r8a7740) This is a fallback for the above renesas,cmt-32-fast-* entries. - - "renesas,cmt-48-sh7372" for the sh7372 48-bit CMT - (CMT1) - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT (CMT1) - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT (CMT1) - "renesas,cmt-48" for all non-second generation 48-bit CMT - (CMT1 on sh7372, sh73a0 and r8a7740) + (CMT1 on sh73a0 and r8a7740) This is a fallback for the above renesas,cmt-48-* entries. - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT
Signature · 1 line
2.7.4
PATCH 4/9 devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings
In reply to Daniel LezcanoFrom: Magnus Damm <[email protected]>
Add documentation for new separate CMT0 and CMT1 DT compatible strings for R-Car Gen2. These compat strings allow us to enable CMT1-specific features in the driver. The old compat strings will be deprecated in the not so distant future.
--- Documentation/devicetree/bindings/timer/renesas,cmt.txt | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/timer/renesas,cmt.txt +3 -0
@@ -36,6 +36,9 @@ Required Properties: (CMT1 on sh73a0 and r8a7740) This is a fallback for the above renesas,cmt-48-* entries. + - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2. + - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2. + - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT (CMT[01]) - "renesas,cmt-48-r8a7790" for the r8a7790 48-bit CMT
Signature · 1 line
2.7.4
PATCH 5/9 devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings
In reply to Daniel LezcanoFrom: Magnus Damm <[email protected]>
Update SoC-specific bindings for r8a73a4 and R-Car Gen2 CMT0 and CMT1.
--- .../devicetree/bindings/timer/renesas,cmt.txt | 24 +++++++++++++--------- 1 file changed, 14 insertions(+), 10 deletions(-)
Documentation/devicetree/bindings/timer/renesas,cmt.txt +14 -10
@@ -36,19 +36,23 @@ Required Properties: (CMT1 on sh73a0 and r8a7740) This is a fallback for the above renesas,cmt-48-* entries. + - "renesas,cmt0-r8a73a4" for the 32-bit CMT0 device included in r8a73a4. + - "renesas,cmt1-r8a73a4" for the 48-bit CMT1 device included in r8a73a4. + - "renesas,cmt0-r8a7790" for the 32-bit CMT0 device included in r8a7790. + - "renesas,cmt1-r8a7790" for the 48-bit CMT1 device included in r8a7790. + - "renesas,cmt0-r8a7791" for the 32-bit CMT0 device included in r8a7791. + - "renesas,cmt1-r8a7791" for the 48-bit CMT1 device included in r8a7791. + - "renesas,cmt0-r8a7793" for the 32-bit CMT0 device included in r8a7793. + - "renesas,cmt1-r8a7793" for the 48-bit CMT1 device included in r8a7793. + - "renesas,cmt0-r8a7794" for the 32-bit CMT0 device included in r8a7794. + - "renesas,cmt1-r8a7794" for the 48-bit CMT1 device included in r8a7794. + - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2. - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2. + These are fallbacks for r8a73a4 and all the R-Car Gen2 + entries listed above. - - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT - (CMT[01]) - - "renesas,cmt-48-r8a7790" for the r8a7790 48-bit CMT - (CMT[01]) - - "renesas,cmt-48-r8a7791" for the r8a7791 48-bit CMT - (CMT[01]) - - "renesas,cmt-48-gen2" for all second generation 48-bit CMT - (CMT[01] on r8a73a4, r8a7790 and r8a7791) - This is a fallback for the renesas,cmt-48-r8a73a4, - renesas,cmt-48-r8a7790 and renesas,cmt-48-r8a7791 entries. + - "renesas,cmt-48-gen2" is <deprecated>, use "renesas,cmt[01]-*" instead. - reg: base address and length of the registers block for the timer module. - interrupts: interrupt-specifier for the timer, one per channel.
Signature · 1 line
2.7.4
PATCH 6/9 devicetree: bindings: Deprecate property, update example
In reply to Daniel LezcanoFrom: Magnus Damm <[email protected]>
Deprecate "renesas,channels-mask" and update the r8a7790 CMT example.
--- .../devicetree/bindings/timer/renesas,cmt.txt | 24 +++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-)
Documentation/devicetree/bindings/timer/renesas,cmt.txt +17 -7
@@ -60,21 +60,31 @@ Required Properties: in clock-names. - clock-names: must contain "fck" for the functional clock. - - renesas,channels-mask: bitmask of the available channels. + - renesas,channels-mask: <deprecated>, information kept in device driver. -Example: R8A7790 (R-Car H2) CMT0 node - - CMT0 on R8A7790 implements hardware channels 5 and 6 only and names - them channels 0 and 1 in the documentation. +Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes cmt0: timer@ffca0000 { - compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; + compatible = "renesas,cmt0-r8a7790", "renesas,rcar-gen2-cmt0"; reg = <0 0xffca0000 0 0x1004>; interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, <0 142 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_CMT0>; clock-names = "fck"; + }; - renesas,channels-mask = <0x60>; + cmt1: timer@e6130000 { + compatible = "renesas,cmt1-r8a7790", "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>, + <0 122 IRQ_TYPE_LEVEL_HIGH>, + <0 123 IRQ_TYPE_LEVEL_HIGH>, + <0 124 IRQ_TYPE_LEVEL_HIGH>, + <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 126 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_CMT1>; + clock-names = "fck"; };
Signature · 1 line
2.7.4
PATCH 7/9 devicetree: bindings: Remove unused 32-bit CMT bindings
In reply to Daniel LezcanoFrom: Magnus Damm <[email protected]>
Remove the 32-bit CMT compat strings to reduce maintenance burden.
It should be fine to break DT compatibility because the 32-bit CMT DT binding was never part of any upstream DTS file.
--- Documentation/devicetree/bindings/timer/renesas,cmt.txt | 16 ---------------- 1 file changed, 16 deletions(-)
Documentation/devicetree/bindings/timer/renesas,cmt.txt +0 -16
@@ -12,22 +12,6 @@ datasheets. Required Properties: - compatible: must contain one or more of the following: - - "renesas,cmt-32-r8a7740" for the r8a7740 32-bit CMT - (CMT0) - - "renesas,cmt-32-sh73a0" for the sh73a0 32-bit CMT - (CMT0) - - "renesas,cmt-32" for all 32-bit CMT without fast clock support - (CMT0 on sh73a0 and r8a7740) - This is a fallback for the above renesas,cmt-32-* entries. - - - "renesas,cmt-32-fast-r8a7740" for the r8a7740 32-bit CMT with fast - clock support (CMT[234]) - - "renesas,cmt-32-fast-sh73a0" for the sh73A0 32-bit CMT with fast - clock support (CMT[234]) - - "renesas,cmt-32-fast" for all 32-bit CMT with fast clock support - (CMT[234] on sh73a0 and r8a7740) - This is a fallback for the above renesas,cmt-32-fast-* entries. - - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT (CMT1) - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT
Signature · 1 line
2.7.4
PATCH 8/9 devicetree: bindings: Remove deprecated properties
In reply to Daniel LezcanoFrom: Magnus Damm <[email protected]>
The deprecated DT properties are part of the GIT history, no need to keep them around any longer.
--- Documentation/devicetree/bindings/timer/renesas,cmt.txt | 4 ---- 1 file changed, 4 deletions(-)
Documentation/devicetree/bindings/timer/renesas,cmt.txt +0 -4
@@ -36,16 +36,12 @@ Required Properties: These are fallbacks for r8a73a4 and all the R-Car Gen2 entries listed above. - - "renesas,cmt-48-gen2" is <deprecated>, use "renesas,cmt[01]-*" instead. - - reg: base address and length of the registers block for the timer module. - interrupts: interrupt-specifier for the timer, one per channel. - clocks: a list of phandle + clock-specifier pairs, one for each entry in clock-names. - clock-names: must contain "fck" for the functional clock. - - renesas,channels-mask: <deprecated>, information kept in device driver. - Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes
Signature · 1 line
2.7.4
PATCH 9/9 clocksource/drivers/bcm2835: Remove message on memory allocation failure
In reply to Daniel LezcanoFrom: Markus Elfring <[email protected]>
The bcm2835_timer_init() function emits an error message in case of a memory allocation failure. This is pointless as the mm core already do that.
Remove this message.
This issue was detected by using the Coccinelle software.
--- drivers/clocksource/bcm2835_timer.c | 1 - 1 file changed, 1 deletion(-)
drivers/clocksource/bcm2835_timer.c +0 -1
@@ -114,7 +114,6 @@ static int __init bcm2835_timer_init(struct device_node *node) timer =kzalloc (sizeof (*timer),GFP_KERNEL );if (!timer) { -pr_err ("Can't allocate timer struct\n" ); ret = -ENOMEM ; goto err_iounmap; }
Signature · 1 line
2.7.4
Re: [PATCH 9/9] clocksource/drivers/bcm2835: Remove message on memory allocation failure
I would prefer to use the wording ?for a? instead of ?on? in the commit subject.
Quoted 2 lines
The
bcm2835_timer_init()function emits an error message in case of a memory allocation failure. This is pointless as the mm core already do that.
Does this commit message contain a typo?
Would a wording like ?? does that already.? be more appropriate here?
Regards,
Markus
Re: [PATCH 9/9] clocksource/drivers/bcm2835: Remove message on memory allocation failure
Quoted 8 lines · SF Markus Elfring
I would prefer to use the wording ?for a? instead of ?on? in the commit subject.
Quoted 2 lines
The
bcm2835_timer_init()function emits an error message in case of a memory allocation failure. This is pointless as the mm core already do that.Does this commit message contain a typo?
Would a wording like ?? does that already.? be more appropriate here?
Yep. Fixed.
Thanks.
-- Daniel
Signature · 5 lines
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Re: [PATCH 9/9] clocksource/drivers/bcm2835: Remove message on memory allocation failure
Quoted 3 lines
Quoted 1 line
Would a wording like ?? does that already.? be more appropriate here?
Yep. Fixed.
Thanks for this adjustment.
https://git.linaro.org/people/daniel.lezcano/linux.git/commit/?h=clockevents/4.14&id=fd388bc07c2ca854f28f405bb65470647499dcaa
Do you disagree to my suggestion to amend also the commit subject?
Regards,
Markus
Re: [PATCH 9/9] clocksource/drivers/bcm2835: Remove message on memory allocation failure
Quoted 8 lines · SF Markus Elfring
Quoted 3 lines
Quoted 1 line
Would a wording like ?? does that already.? be more appropriate here?
Yep. Fixed.
Thanks for this adjustment.
https://git.linaro.org/people/daniel.lezcano/linux.git/commit/?h=clockevents/4.14&id=fd388bc07c2ca854f28f405bb65470647499dcaaDo you disagree to my suggestion to amend also the commit subject?
Just wanted to keep it short.
Signature · 5 lines
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Re: clocksource/drivers/bcm2835: Remove message on memory allocation failure
Quoted 5 lines
Quoted 3 lines
Do you disagree to my suggestion to amend also the commit subject?
Just wanted to keep it short.
I propose to reconsider the preposition which should be used in the title.
Regards,
Markus
Re: clocksource/drivers/bcm2835: Remove message on memory allocation failure
Quoted 7 lines · SF Markus Elfring
Quoted 5 lines
Quoted 3 lines
Do you disagree to my suggestion to amend also the commit subject?
Just wanted to keep it short.
I propose to reconsider the preposition which should be used in the title.
Done.
Signature · 5 lines
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Quoted 9 lines · Daniel Lezcano
Hi Thomas,
this pull request contains the following changes:
- Add the new imx-tpm driver (Dong Aisheng)
- Remove DT deprecated binding for Renesas (Magnus Damm)
- Remove error message on memory allocation (Markus Elfring)
Hi Thomas,
Rob just point me I missed the patch:
"clocksource: Convert to using %pOF instead of full_name"
Is it ok if I add it in the clockevents/4.14 branch before you pull it ?
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Quoted 11 lines · Daniel Lezcano
Quoted 9 lines · Daniel Lezcano
Hi Thomas,
this pull request contains the following changes:
- Add the new imx-tpm driver (Dong Aisheng)
- Remove DT deprecated binding for Renesas (Magnus Damm)
- Remove error message on memory allocation (Markus Elfring)
Quoted 7 lines
Hi Thomas,
Rob just point me I missed the patch:
"clocksource: Convert to using %pOF instead of
full_name"Is it ok if I add it in the clockevents/4.14 branch before you pull it ?
Yes, please add it and let me know.
Quoted 14 lines · Thomas Gleixner
Quoted 13 lines · Daniel Lezcano
Quoted 9 lines · Daniel Lezcano
Hi Thomas,
this pull request contains the following changes:
- Add the new imx-tpm driver (Dong Aisheng)
- Remove DT deprecated binding for Renesas (Magnus Damm)
- Remove error message on memory allocation (Markus Elfring)
Hi Thomas,
Quoted 7 lines
Quoted 5 lines
Rob just point me I missed the patch:
"clocksource: Convert to using %pOF instead of
full_name"Is it ok if I add it in the clockevents/4.14 branch before you pull it ?
Yes, please add it and let me know.
Done.
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog