Skip to contentSkip to conversation

clockevents for 4.14

GIT PULL In review Daniel Lezcano 3 participants 19 messages Aug 29, 2017 – Aug 31, 2017

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

Hi Thomas,

this pull request contains the following changes:

- Add the new imx-tpm driver (Dong Aisheng)

- Remove DT deprecated binding for Renesas (Magnus Damm)

- Remove error message on memory allocation (Markus Elfring)

Thanks.

-- Daniel

The following changes since commit 4e2a809703e2b2300438a425b0a3f2013b55fcc6:

Merge branch 'fortglx/4.14/time' of https://git.linaro.org/people/john.stultz/linux into timers/core (2017-08-20 11:46:46 +0200)

are available in the git repository at:

http://[email protected]/people/daniel.lezcano/linux.git clockevents/4.14

for you to fetch changes up to e261c31c7a06aa371a3fbef00b6bd8b5a12a5460:

clocksource/drivers/bcm2835: Remove message on memory allocation failure (2017-08-29 11:09:06 +0200)

----------------------------------------------------------------
Dong Aisheng (2):
dt-bindings: timer: Add nxp tpm timer binding doc clocksource/drivers/imx-tpm: Add imx tpm timer support

Magnus Damm (6):
devicetree: bindings: Remove sh7372 CMT binding
devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings
devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings
devicetree: bindings: Deprecate property, update example
devicetree: bindings: Remove unused 32-bit CMT bindings
devicetree: bindings: Remove deprecated properties

Markus Elfring (1):
clocksource/drivers/bcm2835: Remove message on memory allocation failure

 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt |  28 +++++++++++++++
 Documentation/devicetree/bindings/timer/renesas,cmt.txt   |  73 +++++++++++++++++----------------------
 drivers/clocksource/Kconfig                               |   8 +++++
 drivers/clocksource/Makefile                              |   1 +
 drivers/clocksource/bcm2835_timer.c                       |   1 -
 drivers/clocksource/timer-imx-tpm.c                       | 239 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 308 insertions(+), 42 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
 create mode 100644 drivers/clocksource/timer-imx-tpm.c
Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#1 lore raw

PATCH 1/9 dt-bindings: timer: Add nxp tpm timer binding doc

From: Dong Aisheng <[email protected]>

Adding NXP Low Power Timer/Pulse Width Modulation Module (TPM) binding doc.

---
 .../devicetree/bindings/timer/nxp,tpm-timer.txt    | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt new file +28 -0
new file mode 100644
index 0000000..b4aa7dd
@@ -0,0 +1,28 @@
+NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+The Timer/PWM Module (TPM) supports input capture, output compare,
+and the generation of PWM signals to control electric motor and power
+management applications. The counter, compare and capture registers
+are clocked by an asynchronous clock that can remain enabled in low
+power modes. TPM can support global counter bus where one TPM drives
+the counter bus for the others, provided bit width is the same.
+
+Required properties:
+
+- compatible :	should be "fsl,imx7ulp-tpm"
+- reg :		Specifies base physical address and size of the register sets
+		for the clock event device and clock source device.
+- interrupts :	Should be the clock event device interrupt.
+- clocks :	The clocks provided by the SoC to drive the timer, must contain
+		an entry for each entry in clock-names.
+- clock-names : Must include the following entries: "igp" and "per".
+
+Example:
+tpm5: tpm@40260000 {
+	compatible = "fsl,imx7ulp-tpm";
+	reg = <0x40260000 0x1000>;
+	interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
+		 <&clks IMX7ULP_CLK_LPTPM5>;
+	clock-names = "ipg", "per";
+};
Signature · 6 lines
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#2 lore raw

PATCH 2/9 clocksource/drivers/imx-tpm: Add imx tpm timer support

From: Dong Aisheng <[email protected]>

IMX Timer/PWM Module (TPM) supports both timer and pwm function while this patch only adds the timer support. PWM would be added later.

The TPM counter, compare and capture registers are clocked by an asynchronous clock that can remain enabled in low power modes.

NOTE: We observed in a very small probability, the bus fabric contention between GPU and A7 may results a few cycles delay of writing CNT registers which may cause the min_delta event got missed, so we need add a ETIME check here in case it happened.

Cc Daniel Lezcano <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Shawn Guo <[email protected]>
Cc Anson Huang <[email protected]>
Cc Bai Ping <[email protected]>
---
 drivers/clocksource/Kconfig         |   8 ++
 drivers/clocksource/Makefile        |   1 +
 drivers/clocksource/timer-imx-tpm.c | 239 ++++++++++++++++++++++++++++++++++++
 3 files changed, 248 insertions(+)
 create mode 100644 drivers/clocksource/timer-imx-tpm.c
drivers/clocksource/Kconfig +8 -0
index fcae5ca..0a953fc 100644
@@ -598,6 +598,14 @@ config CLKSRC_IMX_GPT
 	depends on ARM && CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 
+config CLKSRC_IMX_TPM
+	bool "Clocksource using i.MX TPM" if COMPILE_TEST
+	depends on ARM && CLKDEV_LOOKUP && GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	help
+	  Enable this option to use IMX Timer/PWM Module (TPM) timer as
+	  clocksource.
+
 config CLKSRC_ST_LPC
 	bool "Low power clocksource found in the LPC" if COMPILE_TEST
 	select TIMER_OF if OF
drivers/clocksource/Makefile +1 -0
index 6df9494..dbc1ad1 100644
@@ -67,6 +67,7 @@ obj-$(CONFIG_CLKSRC_VERSATILE)		+= versatile.o
 obj-$(CONFIG_CLKSRC_MIPS_GIC)		+= mips-gic-timer.o
 obj-$(CONFIG_CLKSRC_TANGO_XTAL)		+= tango_xtal.o
 obj-$(CONFIG_CLKSRC_IMX_GPT)		+= timer-imx-gpt.o
+obj-$(CONFIG_CLKSRC_IMX_TPM)		+= timer-imx-tpm.o
 obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
drivers/clocksource/timer-imx-tpm.c new file +239 -0

239 lines not on this page · raw message

Signature · 1 line
2.7.4
#3 lore raw

PATCH 3/9 devicetree: bindings: Remove sh7372 CMT binding

In reply to Daniel Lezcano

From: Magnus Damm <[email protected]>

Remove the sh7372 CMT compat string to reduce maintenance burden.

It should be fine to break DT compatibility because:
1) The sh7372 SoC support has been removed from upstream
2) The sh7372 CMT DT binding was never part of upstream DTS
3) The CMT driver never matches on the sh7372 binding

---
 Documentation/devicetree/bindings/timer/renesas,cmt.txt | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)
Documentation/devicetree/bindings/timer/renesas,cmt.txt +3 -9
index 1a05c1b..961c0b6 100644
@@ -14,32 +14,26 @@ Required Properties:
   - compatible: must contain one or more of the following:
     - "renesas,cmt-32-r8a7740" for the r8a7740 32-bit CMT
 		(CMT0)
-    - "renesas,cmt-32-sh7372" for the sh7372 32-bit CMT
-		(CMT0)
     - "renesas,cmt-32-sh73a0" for the sh73a0 32-bit CMT
 		(CMT0)
     - "renesas,cmt-32" for all 32-bit CMT without fast clock support
-		(CMT0 on sh7372, sh73a0 and r8a7740)
+		(CMT0 on sh73a0 and r8a7740)
 		This is a fallback for the above renesas,cmt-32-* entries.
 
     - "renesas,cmt-32-fast-r8a7740" for the r8a7740 32-bit CMT with fast
 		clock support (CMT[234])
-    - "renesas,cmt-32-fast-sh7372" for the sh7372 32-bit CMT with fast
-		clock support (CMT[234])
     - "renesas,cmt-32-fast-sh73a0" for the sh73A0 32-bit CMT with fast
 		clock support (CMT[234])
     - "renesas,cmt-32-fast" for all 32-bit CMT with fast clock support
-		(CMT[234] on sh7372, sh73a0 and r8a7740)
+		(CMT[234] on sh73a0 and r8a7740)
 		This is a fallback for the above renesas,cmt-32-fast-* entries.
 
-    - "renesas,cmt-48-sh7372" for the sh7372 48-bit CMT
-		(CMT1)
     - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT
 		(CMT1)
     - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT
 		(CMT1)
     - "renesas,cmt-48" for all non-second generation 48-bit CMT
-		(CMT1 on sh7372, sh73a0 and r8a7740)
+		(CMT1 on sh73a0 and r8a7740)
 		This is a fallback for the above renesas,cmt-48-* entries.
 
     - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT
Signature · 1 line
2.7.4
#4 lore raw

PATCH 4/9 devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings

In reply to Daniel Lezcano

From: Magnus Damm <[email protected]>

Add documentation for new separate CMT0 and CMT1 DT compatible strings for R-Car Gen2. These compat strings allow us to enable CMT1-specific features in the driver. The old compat strings will be deprecated in the not so distant future.

---
 Documentation/devicetree/bindings/timer/renesas,cmt.txt | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/timer/renesas,cmt.txt +3 -0
index 961c0b6..2583aeb 100644
@@ -36,6 +36,9 @@ Required Properties:
 		(CMT1 on sh73a0 and r8a7740)
 		This is a fallback for the above renesas,cmt-48-* entries.
 
+    - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2.
+    - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2.
+
     - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT
 		(CMT[01])
     - "renesas,cmt-48-r8a7790" for the r8a7790 48-bit CMT
Signature · 1 line
2.7.4
#5 lore raw

PATCH 5/9 devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings

In reply to Daniel Lezcano

From: Magnus Damm <[email protected]>

Update SoC-specific bindings for r8a73a4 and R-Car Gen2 CMT0 and CMT1.

---
 .../devicetree/bindings/timer/renesas,cmt.txt      | 24 +++++++++++++---------
 1 file changed, 14 insertions(+), 10 deletions(-)
Documentation/devicetree/bindings/timer/renesas,cmt.txt +14 -10
index 2583aeb..e81e0d2 100644
@@ -36,19 +36,23 @@ Required Properties:
 		(CMT1 on sh73a0 and r8a7740)
 		This is a fallback for the above renesas,cmt-48-* entries.
 
+    - "renesas,cmt0-r8a73a4" for the 32-bit CMT0 device included in r8a73a4.
+    - "renesas,cmt1-r8a73a4" for the 48-bit CMT1 device included in r8a73a4.
+    - "renesas,cmt0-r8a7790" for the 32-bit CMT0 device included in r8a7790.
+    - "renesas,cmt1-r8a7790" for the 48-bit CMT1 device included in r8a7790.
+    - "renesas,cmt0-r8a7791" for the 32-bit CMT0 device included in r8a7791.
+    - "renesas,cmt1-r8a7791" for the 48-bit CMT1 device included in r8a7791.
+    - "renesas,cmt0-r8a7793" for the 32-bit CMT0 device included in r8a7793.
+    - "renesas,cmt1-r8a7793" for the 48-bit CMT1 device included in r8a7793.
+    - "renesas,cmt0-r8a7794" for the 32-bit CMT0 device included in r8a7794.
+    - "renesas,cmt1-r8a7794" for the 48-bit CMT1 device included in r8a7794.
+
     - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2.
     - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2.
+		These are fallbacks for r8a73a4 and all the R-Car Gen2
+		entries	listed above.
 
-    - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT
-		(CMT[01])
-    - "renesas,cmt-48-r8a7790" for the r8a7790 48-bit CMT
-		(CMT[01])
-    - "renesas,cmt-48-r8a7791" for the r8a7791 48-bit CMT
-		(CMT[01])
-    - "renesas,cmt-48-gen2" for all second generation 48-bit CMT
-		(CMT[01] on r8a73a4, r8a7790 and r8a7791)
-		This is a fallback for the renesas,cmt-48-r8a73a4,
-		renesas,cmt-48-r8a7790 and renesas,cmt-48-r8a7791 entries.
+    - "renesas,cmt-48-gen2" is <deprecated>, use "renesas,cmt[01]-*" instead.
 
   - reg: base address and length of the registers block for the timer module.
   - interrupts: interrupt-specifier for the timer, one per channel.
Signature · 1 line
2.7.4
#6 lore raw

PATCH 6/9 devicetree: bindings: Deprecate property, update example

In reply to Daniel Lezcano

From: Magnus Damm <[email protected]>

Deprecate "renesas,channels-mask" and update the r8a7790 CMT example.

---
 .../devicetree/bindings/timer/renesas,cmt.txt      | 24 +++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)
Documentation/devicetree/bindings/timer/renesas,cmt.txt +17 -7
index e81e0d2..8fb7c93 100644
@@ -60,21 +60,31 @@ Required Properties:
     in clock-names.
   - clock-names: must contain "fck" for the functional clock.
 
-  - renesas,channels-mask: bitmask of the available channels.
+  - renesas,channels-mask: <deprecated>, information kept in device driver.
 
 
-Example: R8A7790 (R-Car H2) CMT0 node
-
-	CMT0 on R8A7790 implements hardware channels 5 and 6 only and names
-	them channels 0 and 1 in the documentation.
+Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes
 
 	cmt0: timer@ffca0000 {
-		compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
+		compatible = "renesas,cmt0-r8a7790", "renesas,rcar-gen2-cmt0";
 		reg = <0 0xffca0000 0 0x1004>;
 		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 142 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
 		clock-names = "fck";
+	};
 
-		renesas,channels-mask = <0x60>;
+	cmt1: timer@e6130000 {
+		compatible = "renesas,cmt1-r8a7790", "renesas,rcar-gen2-cmt1";
+		reg = <0 0xe6130000 0 0x1004>;
+		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
+		clock-names = "fck";
 	};
Signature · 1 line
2.7.4
#7 lore raw

PATCH 7/9 devicetree: bindings: Remove unused 32-bit CMT bindings

In reply to Daniel Lezcano

From: Magnus Damm <[email protected]>

Remove the 32-bit CMT compat strings to reduce maintenance burden.

It should be fine to break DT compatibility because the 32-bit CMT DT binding was never part of any upstream DTS file.

---
 Documentation/devicetree/bindings/timer/renesas,cmt.txt | 16 ----------------
 1 file changed, 16 deletions(-)
Documentation/devicetree/bindings/timer/renesas,cmt.txt +0 -16
index 8fb7c93..d79293a 100644
@@ -12,22 +12,6 @@ datasheets.
 Required Properties:
 
   - compatible: must contain one or more of the following:
-    - "renesas,cmt-32-r8a7740" for the r8a7740 32-bit CMT
-		(CMT0)
-    - "renesas,cmt-32-sh73a0" for the sh73a0 32-bit CMT
-		(CMT0)
-    - "renesas,cmt-32" for all 32-bit CMT without fast clock support
-		(CMT0 on sh73a0 and r8a7740)
-		This is a fallback for the above renesas,cmt-32-* entries.
-
-    - "renesas,cmt-32-fast-r8a7740" for the r8a7740 32-bit CMT with fast
-		clock support (CMT[234])
-    - "renesas,cmt-32-fast-sh73a0" for the sh73A0 32-bit CMT with fast
-		clock support (CMT[234])
-    - "renesas,cmt-32-fast" for all 32-bit CMT with fast clock support
-		(CMT[234] on sh73a0 and r8a7740)
-		This is a fallback for the above renesas,cmt-32-fast-* entries.
-
     - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT
 		(CMT1)
     - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT
Signature · 1 line
2.7.4
#8 lore raw

PATCH 8/9 devicetree: bindings: Remove deprecated properties

In reply to Daniel Lezcano

From: Magnus Damm <[email protected]>

The deprecated DT properties are part of the GIT history, no need to keep them around any longer.

---
 Documentation/devicetree/bindings/timer/renesas,cmt.txt | 4 ----
 1 file changed, 4 deletions(-)
Documentation/devicetree/bindings/timer/renesas,cmt.txt +0 -4
index d79293a..6ca6b9e 100644
@@ -36,16 +36,12 @@ Required Properties:
 		These are fallbacks for r8a73a4 and all the R-Car Gen2
 		entries	listed above.
 
-    - "renesas,cmt-48-gen2" is <deprecated>, use "renesas,cmt[01]-*" instead.
-
   - reg: base address and length of the registers block for the timer module.
   - interrupts: interrupt-specifier for the timer, one per channel.
   - clocks: a list of phandle + clock-specifier pairs, one for each entry
     in clock-names.
   - clock-names: must contain "fck" for the functional clock.
 
-  - renesas,channels-mask: <deprecated>, information kept in device driver.
-
 
 Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes
 
Signature · 1 line
2.7.4
#9 lore raw

PATCH 9/9 clocksource/drivers/bcm2835: Remove message on memory allocation failure

In reply to Daniel Lezcano

From: Markus Elfring <[email protected]>

The bcm2835_timer_init() function emits an error message in case of a memory allocation failure. This is pointless as the mm core already do that.

Remove this message.

This issue was detected by using the Coccinelle software.

---
 drivers/clocksource/bcm2835_timer.c | 1 -
 1 file changed, 1 deletion(-)
drivers/clocksource/bcm2835_timer.c +0 -1
index 82828d3..39e489a 100644
@@ -114,7 +114,6 @@ static int __init bcm2835_timer_init(struct device_node *node)
 
 	timer = kzalloc(sizeof(*timer), GFP_KERNEL);
 	if (!timer) {
-		pr_err("Can't allocate timer struct\n");
 		ret = -ENOMEM;
 		goto err_iounmap;
 	}
Signature · 1 line
2.7.4
#10 lore raw

Re: [PATCH 9/9] clocksource/drivers/bcm2835: Remove message on memory allocation failure

I would prefer to use the wording ?for a? instead of ?on? in the commit subject.

Quoted 2 lines

The bcm2835_timer_init() function emits an error message in case of a memory allocation failure. This is pointless as the mm core already do that.

Does this commit message contain a typo?
Would a wording like ?? does that already.? be more appropriate here?

Regards,
Markus

#11 lore raw

Re: [PATCH 9/9] clocksource/drivers/bcm2835: Remove message on memory allocation failure

Quoted 8 lines · SF Markus Elfring

I would prefer to use the wording ?for a? instead of ?on? in the commit subject.

Quoted 2 lines

The bcm2835_timer_init() function emits an error message in case of a memory allocation failure. This is pointless as the mm core already do that.

Does this commit message contain a typo?
Would a wording like ?? does that already.? be more appropriate here?

Yep. Fixed.

Thanks.

-- Daniel

Signature · 5 lines
 <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#13 lore raw

Re: [PATCH 9/9] clocksource/drivers/bcm2835: Remove message on memory allocation failure

Quoted 8 lines · SF Markus Elfring
Quoted 3 lines
Quoted 1 line

Would a wording like ?? does that already.? be more appropriate here?

Yep. Fixed.

Thanks for this adjustment.
https://git.linaro.org/people/daniel.lezcano/linux.git/commit/?h=clockevents/4.14&id=fd388bc07c2ca854f28f405bb65470647499dcaa

Do you disagree to my suggestion to amend also the commit subject?

Just wanted to keep it short.

Signature · 5 lines
 <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#15 lore raw

Re: clocksource/drivers/bcm2835: Remove message on memory allocation failure

Quoted 7 lines · SF Markus Elfring
Quoted 5 lines
Quoted 3 lines

https://git.linaro.org/people/daniel.lezcano/linux.git/commit/?h=clockevents/4.14&id=fd388bc07c2ca854f28f405bb65470647499dcaa

Do you disagree to my suggestion to amend also the commit subject?

Just wanted to keep it short.

I propose to reconsider the preposition which should be used in the title.

Done.

Signature · 5 lines
 <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#16 lore raw
In reply to Daniel Lezcano
Quoted 9 lines · Daniel Lezcano

Hi Thomas,

this pull request contains the following changes:

- Add the new imx-tpm driver (Dong Aisheng)

- Remove DT deprecated binding for Renesas (Magnus Damm)

- Remove error message on memory allocation (Markus Elfring)

Hi Thomas,

Rob just point me I missed the patch:

"clocksource: Convert to using %pOF instead of full_name"

Is it ok if I add it in the clockevents/4.14 branch before you pull it ?

Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#17 lore raw
Quoted 11 lines · Daniel Lezcano
Quoted 9 lines · Daniel Lezcano

Hi Thomas,

this pull request contains the following changes:

- Add the new imx-tpm driver (Dong Aisheng)

- Remove DT deprecated binding for Renesas (Magnus Damm)

- Remove error message on memory allocation (Markus Elfring)

Quoted 7 lines

Hi Thomas,

Rob just point me I missed the patch:

"clocksource: Convert to using %pOF instead of full_name"

Is it ok if I add it in the clockevents/4.14 branch before you pull it ?

Yes, please add it and let me know.

#18 lore raw
Quoted 14 lines · Thomas Gleixner
Quoted 13 lines · Daniel Lezcano
Quoted 9 lines · Daniel Lezcano

Hi Thomas,

this pull request contains the following changes:

- Add the new imx-tpm driver (Dong Aisheng)

- Remove DT deprecated binding for Renesas (Magnus Damm)

- Remove error message on memory allocation (Markus Elfring)

Hi Thomas,

Quoted 7 lines
Quoted 5 lines

Rob just point me I missed the patch:

"clocksource: Convert to using %pOF instead of full_name"

Is it ok if I add it in the clockevents/4.14 branch before you pull it ?

Yes, please add it and let me know.

Done.

Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog