Skip to contentSkip to conversation

ARM: dts: Add initial Pistachio i.mx6q board support.

PATCH Applied Wig C 3 participants 3 messages Sep 9, 2017 – Sep 22, 2017

Subsystems (3)
lore
Share & tools
lore

Wig C

author
#0 lore raw

PATCH v4 1/1 ARM: dts: Add initial Pistachio i.mx6q board support.

From: YuanCheng Cheng <[email protected]>

Working items:

- 800MHz CPU
- 2GB of RAM (DDR3)
- 4GB of eMMC storage
- 1T1R WiFi 2.4 GHz
- Power management support
- 1x 10/100/1000 Mbps Ethernet WAN port
- 2x USB 2.0 Host
- PCIe
- HDMI/VGA/LVDS display
- 1x UART for RS232/422/485
- 2x UART for RS232
- 1x UART for serial console
- 1x CAN bus

Specification: http://nutsboard.org/pistachio

---
 arch/arm/boot/dts/Makefile            |   1 +
 arch/arm/boot/dts/imx6q-pistachio.dts | 693 ++++++++++++++++++++++++++++++++++
 2 files changed, 694 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-pistachio.dts
arch/arm/boot/dts/Makefile +1 -0
index 4b17f35..670254b 100644
@@ -427,6 +427,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-nitrogen6_som2.dtb \
 	imx6q-novena.dtb \
 	imx6q-phytec-pbab01.dtb \
+	imx6q-pistachio.dtb \
 	imx6q-rex-pro.dtb \
 	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
arch/arm/boot/dts/imx6q-pistachio.dts new file +693 -0

693 lines not on this page · raw message

Signature · 1 line
2.7.4
reviewer Reviewed-by on v4 1/1
#1 lore raw
Quoted 18 lines · Wig C

From: YuanCheng Cheng <[email protected]>

Working items:

- 800MHz CPU
- 2GB of RAM (DDR3)
- 4GB of eMMC storage
- 1T1R WiFi 2.4 GHz
- Power management support
- 1x 10/100/1000 Mbps Ethernet WAN port
- 2x USB 2.0 Host
- PCIe
- HDMI/VGA/LVDS display
- 1x UART for RS232/422/485
- 2x UART for RS232
- 1x UART for serial console
- 1x CAN bus

Quoted 3 lines

Specification: http://nutsboard.org/pistachio

Applied
#2 lore raw
In reply to Wig C
Quoted 18 lines · Wig C

From: YuanCheng Cheng <[email protected]>

Working items:

- 800MHz CPU
- 2GB of RAM (DDR3)
- 4GB of eMMC storage
- 1T1R WiFi 2.4 GHz
- Power management support
- 1x 10/100/1000 Mbps Ethernet WAN port
- 2x USB 2.0 Host
- PCIe
- HDMI/VGA/LVDS display
- 1x UART for RS232/422/485
- 2x UART for RS232
- 1x UART for serial console
- 1x CAN bus

Quoted 3 lines

Specification: http://nutsboard.org/pistachio

Applied, thanks.