sparc64: Optimize fls, fls64 and __fls
Subsystems (2)
v2 cover sparc64: Optimize fls, fls64 and __fls
SPARC provides lzcnt instruction (with VIS3) which can be used to optimize fls, fls64 and __fls functions. For the systems that supports lzcnt instruction, we now do boot time patching to use sparc optimized fls, fls64 and __fls functions.
v1->v2:
- Fixed delay slot issue pointed by Rob Gardner in patch 2/2.
Vijay Kumar (2):
sparc64: Define SPARC default fls and __fls
sparc64: Use lzcnt instruction for fls and __fls
arch/sparc/Makefile | 1 + arch/sparc/include/asm/bitops_64.h | 7 +- arch/sparc/kernel/head_64.S | 2 + arch/sparc/lib/Makefile | 4 + arch/sparc/lib/NG4fls.S | 31 +++++++++ arch/sparc/lib/NG4patch.S | 9 +++ arch/sparc/lib/fls.S | 126 ++++++++++++++++++++++++++++++++++++ 7 files changed, 177 insertions(+), 3 deletions(-) create mode 100644 arch/sparc/lib/NG4fls.S create mode 100644 arch/sparc/lib/fls.S
PATCH v2 1/2 sparc64: Define SPARC default fls and __fls
fls and __fls will now require boot time patching on T4 and above. Redefining these functions under arc/sparc/lib.
--- arch/sparc/include/asm/bitops_64.h | 7 +- arch/sparc/lib/Makefile | 1 + arch/sparc/lib/fls.S | 126 ++++++++++++++++++++++++++++++++++++ 3 files changed, 131 insertions(+), 3 deletions(-)
arch/sparc/include/asm/bitops_64.h +4 -3
@@ -22,11 +22,12 @@void clear_bit (unsigned long nr,volatile unsigned long *addr);void change_bit (unsigned long nr,volatile unsigned long *addr); +#define fls64 (word) (((word)?(__fls(word) + 1):0)) +int fls (unsigned int word); +int __fls (unsigned long word); +#include <asm-generic/bitops/non-atomic.h> -#include <asm-generic/bitops/fls.h> -#include <asm-generic/bitops/__fls.h> -#include <asm-generic/bitops/fls64.h> #ifdef __KERNEL__
arch/sparc/lib/Makefile +1 -0
@@ -16,6 +16,7 @@ lib-$(CONFIG_SPARC64) += atomic_64.o lib-$(CONFIG_SPARC32) += lshrdi3.o ashldi3.o lib-$(CONFIG_SPARC32) += muldi3.o bitext.o cmpdi2.o lib-$(CONFIG_SPARC64) += multi3.o +lib-$(CONFIG_SPARC64) += fls.o lib-$(CONFIG_SPARC64) += copy_page.o clear_page.o bzero.o lib-$(CONFIG_SPARC64) += csum_copy.o csum_copy_from_user.o csum_copy_to_user.o
arch/sparc/lib/fls.S new file +126 -0
126 lines not on this page · raw message
Signature · 1 line
1.7.1
Re: [PATCH v2 1/2] sparc64: Define SPARC default fls and __fls
Hi Vijay.
Some feedback - see below.
The comment about ENTRY() ENDPROC() is also valid for patch 2/2
Sam
arch/sparc/include/asm/bitops_64.h line 25
Quoted 10 lines
arch/sparc/include/asm/bitops_64.h +1
-0@@ -22,11 +22,12 @@void clear_bit (unsigned long nr,volatile unsigned long *addr);void change_bit (unsigned long nr,volatile unsigned long *addr); +#define fls64 (word) (((word)?(__fls(word) + 1):0))
This macro could result in unwanted sideeffects.
If I use:
fls64(i++)
for some obscure reason, then i will be incremented twice if i != 0. Using the asm-generic version would be better.
Quoted 43 lines
arch/sparc/include/asm/bitops_64.h +3
-3+int fls (unsigned int word); +int __fls (unsigned long word); +#include <asm-generic/bitops/non-atomic.h> -#include <asm-generic/bitops/fls.h> -#include <asm-generic/bitops/__fls.h> -#include <asm-generic/bitops/fls64.h> #ifdef __KERNEL__arch/sparc/lib/Makefile +1
-0@@ -16,6 +16,7 @@ lib-$(CONFIG_SPARC64) += atomic_64.o lib-$(CONFIG_SPARC32) += lshrdi3.o ashldi3.o lib-$(CONFIG_SPARC32) += muldi3.o bitext.o cmpdi2.o lib-$(CONFIG_SPARC64) += multi3.o +lib-$(CONFIG_SPARC64) += fls.o lib-$(CONFIG_SPARC64) += copy_page.o clear_page.o bzero.o lib-$(CONFIG_SPARC64) += csum_copy.o csum_copy_from_user.o csum_copy_to_user.oarch/sparc/lib/fls.S new file +14
-0@@ -0,0 +1,126 @@ +/* fls.S: SPARC default fls and __fls definitions. + * + * SPARC default fls and __fls definitions, which follows the same + * algorithm as in generic fls() and __fls(). These functions will + * be boot time patched on T4 and onward. + */ + +#include <asm/bitsperlong.h> +#include <asm/export.h> + + .text + .align 32 + + .global fls, __fls
arch/sparc/lib/fls.S line 24
Quoted 10 lines
arch/sparc/lib/fls.S new file +10
-0+ .type fls, #function + .type __fls, #function + + .register %g2, #scratch + .register %g3, #scratch + +EXPORT_SYMBOL(__fls) +EXPORT_SYMBOL(fls) + +fls:
Use ENTRY(), ENDPROC() for assembler functions.
Quoted 44 lines
arch/sparc/lib/fls.S new file +44
-0+ brz,pn %o0, 6f + mov 0, %o1 + sethi %hi(0xffff0000), %g3 + mov %o0, %g2 + andcc %o0, %g3, %g0 + be,pt %icc, 8f + mov 32, %o1 + sethi %hi(0xff000000), %g3 + andcc %g2, %g3, %g0 + bne,pt %icc, 3f + sethi %hi(0xf0000000), %g3 + sll %o0, 8, %o0 +1: + add %o1, -8, %o1 + sra %o0, 0, %o0 + mov %o0, %g2 +2: + sethi %hi(0xf0000000), %g3 +3: + andcc %g2, %g3, %g0 + bne,pt %icc, 4f + sethi %hi(0xc0000000), %g3 + sll %o0, 4, %o0 + add %o1, -4, %o1 + sra %o0, 0, %o0 + mov %o0, %g2 +4: + andcc %g2, %g3, %g0 + be,a,pt %icc, 7f + sll %o0, 2, %o0 +5: + xnor %g0, %o0, %o0 + srl %o0, 31, %o0 + sub %o1, %o0, %o1 +6: + jmp %o7 + 8 + sra %o1, 0, %o0 +7: + add %o1, -2, %o1 + ba,pt %xcc, 5b + sra %o0, 0, %o0 +8: + sll %o0, 16, %o0 + sethi %hi(0xff000000), %g3
arch/sparc/lib/fls.S line 78
Quoted 10 lines
arch/sparc/lib/fls.S new file +10
-0+ sra %o0, 0, %o0 + mov %o0, %g2 + andcc %g2, %g3, %g0 + bne,pt %icc, 2b + mov 16, %o1 + ba,pt %xcc, 1b + sll %o0, 8, %o0 + .size fls, .-fls + +__fls:
Same here, use ENTRY(), ENDPROC()
arch/sparc/lib/fls.S line 86
Quoted 8 lines
arch/sparc/lib/fls.S new file +8
-0+#if BITS_PER_LONG = 64 + mov -1, %g2 + sllx %g2, 32, %g2 + and %o0, %g2, %g2 + brnz,pt %g2, 1f + mov 63, %g1 + sllx %o0, 32, %o0 +#endif
Testign for BITS_PER_LONG seems not necessary as long as this is sparc64 only. And sparc32 has no optimized bit operations not even LEON
so this would not make sense in sparc32 land anyway.
arch/sparc/lib/fls.S line 90
Quoted 4 lines
arch/sparc/lib/fls.S new file +4
-0+ mov 31, %g1 +1: + mov -1, %g2 + sllx %g2, (BITS_PER_LONG-16), %g2
spaces around operators please. It is no excuse that the source did not have so.
Quoted 36 lines
arch/sparc/lib/fls.S new file +36
-0+ and %o0, %g2, %g2 + brnz,pt %g2, 2f + mov -1, %g2 + sllx %o0, 16, %o0 + add %g1, -16, %g1 +2: + mov -1, %g2 + sllx %g2, (BITS_PER_LONG-8), %g2 + and %o0, %g2, %g2 + brnz,pt %g2, 3f + mov -1, %g2 + sllx %o0, 8, %o0 + add %g1, -8, %g1 +3: + sllx %g2, (BITS_PER_LONG-4), %g2 + and %o0, %g2, %g2 + brnz,pt %g2, 4f + mov -1, %g2 + sllx %o0, 4, %o0 + add %g1, -4, %g1 +4: + sllx %g2, (BITS_PER_LONG-2), %g2 + and %o0, %g2, %g2 + brnz,pt %g2, 5f + mov -1, %g3 + sllx %o0, 2, %o0 + add %g1, -2, %g1 +5: + mov 0, %g2 + sllx %g3, (BITS_PER_LONG-1), %g3 + and %o0, %g3, %o0 + movre %o0, 1, %g2 + sub %g1, %g2, %g1 + jmp %o7+8 + sra %g1, 0, %o0 + .size __fls, .-__fls
Re: [PATCH v2 1/2] sparc64: Define SPARC default fls and __fls
Quoted 6 lines
arch/sparc/lib/fls.S line 24
Quoted 5 lines
arch/sparc/lib/fls.S new file +5
-0+ +EXPORT_SYMBOL(__fls) +EXPORT_SYMBOL(fls) + +fls:Use
ENTRY(),ENDPROC()for assembler functions.
And locate EXPORT_SYMBOL() right after ENDPROC().
Sam
PATCH v2 2/2 sparc64: Use lzcnt instruction for fls and __fls
In reply to Vijay KumarFor T4 and above, patch fls and __fls functions
at the boot time to use lzcnt instruction.
--- arch/sparc/Makefile | 1 + arch/sparc/kernel/head_64.S | 2 ++ arch/sparc/lib/Makefile | 3 +++ arch/sparc/lib/NG4fls.S | 30 ++++++++++++++++++++++++++++++ arch/sparc/lib/NG4patch.S | 9 +++++++++ 5 files changed, 45 insertions(+), 0 deletions(-)
arch/sparc/Makefile +1 -0
@@ -48,6 +48,7 @@ KBUILD_CFLAGS += -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wno-sign-compare KBUILD_CFLAGS += -Wa,--undeclared-regs KBUILD_CFLAGS += $(call cc-option,-mtune=ultrasparc3) KBUILD_AFLAGS += -m64 -mcpu=ultrasparc -Wa,--undeclared-regs +KBUILD_AFLAGS += -Wa,-Asparc4 ifeq ($(CONFIG_MCOUNT),y) KBUILD_CFLAGS += -pg
arch/sparc/kernel/head_64.S +2 -0
@@ -628,6 +628,8 @@ niagara4_patch: nop call niagara4_patch_pageops nop + call niagara4_patch_fls + nop ba,a,pt %xcc, 80f nop
arch/sparc/lib/Makefile +3 -0
@@ -46,3 +46,6 @@ lib-$(CONFIG_SPARC64) += mcount.o ipcsum.o xor.o hweight.o ffs.o obj-$(CONFIG_SPARC64) += iomap.o obj-$(CONFIG_SPARC32) += atomic32.o ucmpdi2.o obj-$(CONFIG_SPARC64) += PeeCeeI.o + +obj-$(CONFIG_SPARC64) += fls.o +obj-$(CONFIG_SPARC64) += NG4fls.o
arch/sparc/lib/NG4fls.S new file +30 -0
@@ -0,0 +1,30 @@ +/* NG4fls.S: SPARC optimized fls and __fls for T4 and above. + * + * Copyright (c) 2017, Oracle and/or its affiliates. All rights reserved. + */ + + .text + .align 32 + + .globl NG4fls + .globl __NG4fls + .type NG4fls, #function + .type __NG4fls, #function + +NG4fls: + lzcnt %o0, %o1 + mov 64, %o2 + retl + sub %o2, %o1, %o0 + .size NG4fls, .-NG4fls + +__NG4fls: + brz,pn %o0, 1f + mov %o0, %o1 + lzcnt %o1, %o0 + mov 63, %o2 + sub %o2, %o0, %o0 +1: + retl + nop + .size __NG4fls, .-__NG4fls
arch/sparc/lib/NG4patch.S +9 -0
@@ -52,3 +52,12 @@ niagara4_patch_pageops: retl nop .size niagara4_patch_pageops,.-niagara4_patch_pageops + + .globl niagara4_patch_fls + .type niagara4_patch_fls,#function +niagara4_patch_fls: + NG_DO_PATCH(fls, NG4fls) + NG_DO_PATCH(__fls, __NG4fls) + retl + nop + .size niagara4_patch_fls,.-niagara4_patch_fls
Signature · 1 line
1.7.1
Re: [PATCH v2 2/2] sparc64: Use lzcnt instruction for fls and __fls
Hi Vijay.
Quoted 18 lines · Vijay Kumar
For T4 and above, patch fls and
__flsfunctions
at the boot time to use lzcnt instruction.Signed-off-by Vijay Kumar <[email protected]>Reviewed-by Babu Moger <[email protected]>--- arch/sparc/Makefile | 1 + arch/sparc/kernel/head_64.S | 2 ++ arch/sparc/lib/Makefile | 3 +++ arch/sparc/lib/NG4fls.S | 30 ++++++++++++++++++++++++++++++ arch/sparc/lib/NG4patch.S | 9 +++++++++ 5 files changed, 45 insertions(+), 0 deletions(-)arch/sparc/Makefile +0
-0
arch/sparc/Makefile KBUILD_CFLAGS += -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wno-sign-compare · line 51
Quoted 4 lines
arch/sparc/Makefile +1
-0@@ -48,6 +48,7 @@ KBUILD_CFLAGS += -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wno-sign-compare KBUILD_CFLAGS += -Wa,--undeclared-regs KBUILD_CFLAGS += $(call cc-option,-mtune=ultrasparc3) KBUILD_AFLAGS += -m64 -mcpu=ultrasparc -Wa,--undeclared-regs +KBUILD_AFLAGS += -Wa,-Asparc4
This change is not justified anywhere??
Quoted 35 lines
arch/sparc/Makefile +0
-0ifeq ($(CONFIG_MCOUNT),y) KBUILD_CFLAGS += -pgarch/sparc/kernel/head_64.S +2
-0@@ -628,6 +628,8 @@ niagara4_patch: nop call niagara4_patch_pageops nop + call niagara4_patch_fls + nop ba,a,pt %xcc, 80f noparch/sparc/lib/Makefile +3
-0@@ -46,3 +46,6 @@ lib-$(CONFIG_SPARC64) += mcount.o ipcsum.o xor.o hweight.o ffs.o obj-$(CONFIG_SPARC64) += iomap.o obj-$(CONFIG_SPARC32) += atomic32.o ucmpdi2.o obj-$(CONFIG_SPARC64) += PeeCeeI.o + +obj-$(CONFIG_SPARC64) += fls.o +obj-$(CONFIG_SPARC64) += NG4fls.oarch/sparc/lib/NG4fls.S new file +2
-0@@ -0,0 +1,30 @@ +/* NG4fls.S: SPARC optimized fls and __fls for T4 and above. + *
arch/sparc/lib/NG4fls.S line 12
Quoted 10 lines
arch/sparc/lib/NG4fls.S new file +10
-0+ * Copyright (c) 2017, Oracle and/or its affiliates. All rights reserved. + */ + + .text + .align 32 + + .globl NG4fls + .globl __NG4fls + .type NG4fls, #function + .type __NG4fls, #function
Use ENTRY(), ENDPROC() as already mentioned.
arch/sparc/lib/NG4fls.S line 23
Quoted 10 lines
arch/sparc/lib/NG4fls.S new file +10
-0+NG4fls: + lzcnt %o0, %o1 + mov 64, %o2 + retl + sub %o2, %o1, %o0 + .size NG4fls, .-NG4fls + +__NG4fls: + brz,pn %o0, 1f + mov %o0, %o1
Use tabs for indent, not spaces. In this case one tab + one space.
Quoted 14 lines
arch/sparc/lib/NG4fls.S new file +7
-0+ lzcnt %o1, %o0 + mov 63, %o2 + sub %o2, %o0, %o0 +1: + retl + nop + .size __NG4fls, .-__NG4flsarch/sparc/lib/NG4patch.S +0
-0@@ -52,3 +52,12 @@ niagara4_patch_pageops: retl nop
arch/sparc/lib/NG4patch.S niagara4_patch_pageops: · line 63
Quoted 10 lines
arch/sparc/lib/NG4patch.S +9
-0.size niagara4_patch_pageops,.-niagara4_patch_pageops + + .globl niagara4_patch_fls + .type niagara4_patch_fls,#function +niagara4_patch_fls: + NG_DO_PATCH(fls, NG4fls) + NG_DO_PATCH(__fls, __NG4fls) + retl + nop + .size niagara4_patch_fls,.-niagara4_patch_fls
Please path the remaining functions in this file with ENTRY(), ENDPROC() - in a separate patch.
Sam
Re: [PATCH v2 2/2] sparc64: Use lzcnt instruction for fls and __fls
Hi Sam,
Quoted 11 lines · Sam Ravnborg
arch/sparc/lib/NG4patch.S niagara4_patch_pageops: · line 63
Quoted 10 lines
.size niagara4_patch_pageops,.-niagara4_patch_pageops
arch/sparc/lib/NG4patch.S +9
-0+ + .globl niagara4_patch_fls + .type niagara4_patch_fls,#function +niagara4_patch_fls: + NG_DO_PATCH(fls, NG4fls) + NG_DO_PATCH(__fls, __NG4fls) + retl + nop + .size niagara4_patch_fls,.-niagara4_patch_flsPlease path the remaining functions in this file with
ENTRY(),ENDPROC()- in a separate patch.
Thanks for your comment. Sure, I will make the changes and address other comments as well in my revised version.
- Vijay
David Miller
maintainerRe: [PATCH v2 2/2] sparc64: Use lzcnt instruction for fls and __fls
In reply to Sam RavnborgFrom: Sam Ravnborg <[email protected]>
Date: Wed, 27 Sep 2017 21:56:37 +0200
Quoted 16 lines
Hi Vijay.
Quoted 13 lines · Vijay Kumar
For T4 and above, patch fls and
__flsfunctions
at the boot time to use lzcnt instruction.Signed-off-by Vijay Kumar <[email protected]>Reviewed-by Babu Moger <[email protected]>--- arch/sparc/Makefile | 1 + arch/sparc/kernel/head_64.S | 2 ++ arch/sparc/lib/Makefile | 3 +++ arch/sparc/lib/NG4fls.S | 30 ++++++++++++++++++++++++++++++ arch/sparc/lib/NG4patch.S | 9 +++++++++ 5 files changed, 45 insertions(+), 0 deletions(-)
Quoted 10 lines
arch/sparc/Makefile KBUILD_CFLAGS += -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wno-sign-compare · line 51
Quoted 9 lines
arch/sparc/Makefile +1
-0@@ -48,6 +48,7 @@ KBUILD_CFLAGS += -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wno-sign-compare KBUILD_CFLAGS += -Wa,--undeclared-regs KBUILD_CFLAGS += $(call cc-option,-mtune=ultrasparc3) KBUILD_AFLAGS += -m64 -mcpu=ultrasparc -Wa,--undeclared-regs +KBUILD_AFLAGS += -Wa,-Asparc4This change is not justified anywhere??
It also will likely break with older tools.
Re: [PATCH v2 2/2] sparc64: Use lzcnt instruction for fls and __fls
In reply to Sam RavnborgQuoted 19 lines · Sam Ravnborg
Hi Vijay.
Quoted 13 lines · Vijay Kumar
For T4 and above, patch fls and
__flsfunctions
at the boot time to use lzcnt instruction.Signed-off-by Vijay Kumar <[email protected]>Reviewed-by Babu Moger <[email protected]>---
arch/sparc/Makefile | 1 + arch/sparc/kernel/head_64.S | 2 ++ arch/sparc/lib/Makefile | 3 +++ arch/sparc/lib/NG4fls.S | 30 ++++++++++++++++++++++++++++++ arch/sparc/lib/NG4patch.S | 9 +++++++++ 5 files changed, 45 insertions(+), 0 deletions(-)
Quoted 10 lines
Quoted 9 lines
arch/sparc/Makefile +0
-0@@ -48,6 +48,7 @@ KBUILD_CFLAGS += -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wno-sign-compare
KBUILD_CFLAGS+= -Wa,--undeclared-regsKBUILD_CFLAGS+= $(call cc-option,-mtune=ultrasparc3)KBUILD_AFLAGS+= -m64 -mcpu=ultrasparc -Wa,--undeclared-regs +KBUILD_AFLAGS += -Wa,-Asparc4This change is not justified anywhere??
It looks like this is to get the assembler to recognize the lzcnt instruction.
Vijay,
Older assemblers may not support this flag so you’ll need to hardcode the lzcnt instructions using .word directives.
Anthony
Quoted 92 lines
Quoted 36 lines
ifeq ($(CONFIG_MCOUNT),y)
KBUILD_CFLAGS+= -pgarch/sparc/kernel/head_64.S +2
-0@@ -628,6 +628,8 @@ niagara4_patch: nop call niagara4_patch_pageops nop + call niagara4_patch_fls + nop ba,a,pt %xcc, 80f noparch/sparc/lib/Makefile +0
-0@@ -46,3 +46,6 @@ lib-$(CONFIG_SPARC64) += mcount.o ipcsum.o xor.o hweight.o ffs.oobj-$(CONFIG_SPARC64) += iomap.o
obj-$(CONFIG_SPARC32) += atomic32.o ucmpdi2.o
obj-$(CONFIG_SPARC64) += PeeCeeI.oarch/sparc/lib/Makefile +3
-0+ +obj-$(CONFIG_SPARC64) += fls.o +obj-$(CONFIG_SPARC64) += NG4fls.oarch/sparc/lib/NG4fls.S new file +2
-0@@ -0,0 +1,30 @@ +/* NG4fls.S: SPARC optimized fls and __fls for T4 and above. + *arch/sparc/lib/NG4fls.S line 12
Quoted 10 lines
arch/sparc/lib/NG4fls.S new file +10
-0+ * Copyright (c) 2017, Oracle and/or its affiliates. All rights reserved. + */ + + .text + .align 32 + + .globl NG4fls + .globl __NG4fls + .type NG4fls, #function + .type __NG4fls, #functionUse
ENTRY(),ENDPROC()as already mentioned.arch/sparc/lib/NG4fls.S line 23
Quoted 10 lines
arch/sparc/lib/NG4fls.S new file +10
-0+NG4fls: + lzcnt %o0, %o1 + mov 64, %o2 + retl + sub %o2, %o1, %o0 + .size NG4fls, .-NG4fls + +__NG4fls: + brz,pn %o0, 1f + mov %o0, %o1Use tabs for indent, not spaces. In this case one tab + one space.
Quoted 14 lines
arch/sparc/lib/NG4fls.S new file +7
-0+ lzcnt %o1, %o0 + mov 63, %o2 + sub %o2, %o0, %o0 +1: + retl + nop + .size __NG4fls, .-__NG4flsarch/sparc/lib/NG4patch.S +0
-0@@ -52,3 +52,12 @@ niagara4_patch_pageops: retl noparch/sparc/lib/NG4patch.S niagara4_patch_pageops: · line 63
Quoted 10 lines
arch/sparc/lib/NG4patch.S +9
-0.size niagara4_patch_pageops,.-niagara4_patch_pageops + + .globl niagara4_patch_fls + .type niagara4_patch_fls,#function +niagara4_patch_fls: + NG_DO_PATCH(fls, NG4fls) + NG_DO_PATCH(__fls, __NG4fls) + retl + nop + .size niagara4_patch_fls,.-niagara4_patch_flsPlease path the remaining functions in this file with
ENTRY(),ENDPROC()- in a separate patch.Sam
--
To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
David Miller
maintainerRe: [PATCH v2 2/2] sparc64: Use lzcnt instruction for fls and __fls
RnJvbTogQW50aG9ueSBZem5hZ2EgPGFudGhvbnkueXpuYWdhQG9yYWNsZS5jb20+DQpEYXRlOiBX ZWQsIDI3IFNlcCAyMDE3IDE0OjQ1OjM0IC0wNzAwDQoNCj4gVmlqYXksDQo+IE9sZGVyIGFzc2Vt YmxlcnMgbWF5IG5vdCBzdXBwb3J0IHRoaXMgZmxhZyBzbyB5b3WibGwgbmVlZCB0bw0KPiBoYXJk Y29kZSB0aGUgbHpjbnQgaW5zdHJ1Y3Rpb25zIHVzaW5nIC53b3JkIGRpcmVjdGl2ZXMuDQoNClJp Z2h0LCBvbGRlciBiaW51dGlscyBkbyBub3Qgc3VwcG9ydCB0aGUgVDQgaW5zdHJ1Y3Rpb25zLg0K DQpUaGlzIGlzIHdoeSB3ZSBoYXJkY29kZSB0aGUgb3Bjb2RlcyBmb3IgYWxsIG9mIHRoZSBjcnlw dG8NCmluc3RydWN0aW9ucyB1c2VkIHVuZGVyIGFyY2gvc3BhcmM2NC9jcnlwdG8vLCBmb3IgZXhh bXBsZS4NCg0K