drm/i915/guc: Update default GuC FW for SKL/BXT/KBL
Subsystems (2)
v2 cover drm/i915/guc: Update default GuC FW for SKL/BXT/KBL
With new GuC firmwares (SKL v9.33, BXT v9.29, KBL v9.39) available now at 01.org downloads, let us update the default firmware versions.
Sagar Arun Kamble (3):
drm/i915/guc: Change default GuC FW for SKL to v9.33 drm/i915/guc: Change default GuC FW for BXT to v9.29 drm/i915/guc: Change default GuC FW for KBL to v9.39
drivers/gpu/drm/i915/intel_guc_fw.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/3 drm/i915/guc: Change default GuC FW for SKL to v9.33
This patch makes v9.33 firmware as default firmware for SKL.
Note: GuC logging control is changed with this firmware. GuC is expecting i915 to set control bit to enable "default logging" while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version specific change and can be handled entirely in GuC. It will need to be fixed in future firmwares.
This update includes (since v6.1):
- HuC RSA Keys updated.
- Adding per engine preemption support in GuC scheduler
- Minor bug fixes.
- Added support to log media reset count for host to read it
- Sub-feature level control for power management features.
- Minor clean-up for power management interface.
- Unified power management interface and scheduler interface into 1 file using same version.
- Bug Fix for multi context scheduler flag.
- DCC spec changes for BXT + DCT enabling
- SB based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Media engine Reset fix. Correctly marking context for resubmission in Media Reset case.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- Async FW in Engine Schedule feature (not enabled from KMD)
- GuC clean up to align developer build in line to production build.
- DCC consistency fix for SKL
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- Enabled WA for MSGCH hang issue
- Clear forcewake in CSB when SQ is empty.
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change.No functional change done as part of this check in.
- Enable decoupled freq for SKL GT4
- 3 tries of wake request needed from GuC2CSME for ME to wake up. Request has come from ME spec
- During reset one parameter was not getting accounted
- Enabling Guc Log changes for ultra low logging for OCA
- Enabling build failure check to catch critical section overflow.
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Synchronize SLPC internal debug interface with other branches.
- Fixing Issue with Default Guc Log changes for OCA using special Control Bit
v2: Rebase. Updated commit message.
--- drivers/gpu/drm/i915/intel_guc_fw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_guc_fw.c +2 -2
@@ -30,8 +30,8 @@#include "intel_guc_fw.h" #include "i915_drv.h" -#define SKL_FW_MAJOR 6 -#define SKL_FW_MINOR 1 +#define SKL_FW_MAJOR 9 +#define SKL_FW_MINOR 33#define BXT_FW_MAJOR 8#define BXT_FW_MINOR 7
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 2/3 drm/i915/guc: Change default GuC FW for BXT to v9.29
In reply to Sagar Arun KambleThis patch makes v9.29 firmware as default firmware for BXT.
Note: GuC logging control is changed with this firmware. GuC is expecting i915 to set control bit to enable "default logging" while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version specific change and can be handled entirely in GuC. It will need to be fixed in future firmwares.
This update includes (since v8.7):
- Added support to log media reset count for host to read it
- BXT WA for fixing MTP hangs. WaDisableDOPRenderClkGatingAtSubmit
- Sub-feature level control for power management features.
- Minor clean-up for power management interface.
- Unified power management interface and scheduler interface into 1 file using same version.
- Bug Fix for multi context scheduler flag.
- DCC spec changes for BXT + DCT enabling
- Springboard based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Enabled IBC for BXT
- Media engine Reset fix. Correctly marking context for resubmission in Media Reset case.
- SLPC Dynamic RPe fix to resolve issues where incorrect frequency was set.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- GuC clean up to align developer build in line to production build.
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- Clear forcewake in CSB when SQ is empty.
- SLPC IBC 1.6 for APL to ensure multiplier does not cap IA below Pe.
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change. No functional change done as part of this check in.
- 3 tries of wake request needed from GuC2CSME for ME to wake up. Request has come from ME spec
- During reset one parameter was not getting accounted
- Enabling Guc Log changes for ultra low logging for OCA
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Fixing Issue with Default Guc Log changes for OCA using special Control Bit
v2: Rebase. Updated commit message.
--- drivers/gpu/drm/i915/intel_guc_fw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_guc_fw.c +2 -2
@@ -33,8 +33,8 @@#define SKL_FW_MAJOR 9#define SKL_FW_MINOR 33 -#define BXT_FW_MAJOR 8 -#define BXT_FW_MINOR 7 +#define BXT_FW_MAJOR 9 +#define BXT_FW_MINOR 29#define KBL_FW_MAJOR 9#define KBL_FW_MINOR 14
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 3/3 drm/i915/guc: Change default GuC FW for KBL to v9.39
In reply to Sagar Arun KambleThis patch makes v9.39 firmware as default firmware for KBL.
Note: GuC logging control is changed with this firmware. GuC is expecting i915 to set control bit to enable "default logging" while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version specific change and can be handled entirely in GuC. It will need to be fixed in future firmwares.
This update includes (since v9.14):
- DCC spec changes for BXT + DCT enabling
- Bug Fix for power conservation feature SLPC_DCC
- Scheduler 1-element submission during DCC cycles.
- SB based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Media engine Reset fix. Correctly marking context for resubmission in Media Reset case.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- Async FW in Engine Schedule feature (not enabled from KMD)
- GuC clean up to align developer build in line to production build.
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- GuC Msg Channel Hang WA - Stall GUC for mmio access when IDI is low during CPD flow.
- Fix for submit queue over flow issue
- Enabling IBC on KBL GT3 15W, GT4 45W
- Disabling wrong device ID WA in production signed kernel
- Enabling WA for MSGCH hang issue upto required KBL stepping
- Clear forcewake in CSB when SQ is empty.
- 3Tries of GuC2CSME wake request
- During reset one parameter was not getting accounted
- Disable DCC 1-elem mode submission
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change.No functional change done as part of this check in.
- Enabling Guc Log changes for ultra low logging for OCA
- Enabling Dynamic Render Power Well Hysteresis Programming for Compute Worklaods
- Enabling build failure check to catch critical section overflow.
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Synchronize SLPC internal debug interface with other branches.
- Fixing Issue with Default Guc Log changes for OCA using special Control Bit
- Aggressive DCC implementation for supported platforms.
v2: Rebase. Updated commit message.
--- drivers/gpu/drm/i915/intel_guc_fw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_guc_fw.c +1 -1
@@ -37,7 +37,7 @@#define BXT_FW_MINOR 29#define KBL_FW_MAJOR 9 -#define KBL_FW_MINOR 14 +#define KBL_FW_MINOR 39#define GLK_FW_MAJOR 10#define GLK_FW_MINOR 56
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915/guc: Update default GuC FW for SKL/BXT/KBL
In reply to Sagar Arun Kamble== Series Details ==
== Series Details ==
Series: drm/i915/guc: Update default GuC FW for SKL/BXT/KBL
URL : https://patchwork.freedesktop.org/series/34590/
State : success
== Summary ==
Series 34590v1 drm/i915/guc: Update default GuC FW for SKL/BXT/KBL
https://patchwork.freedesktop.org/api/1.0/series/34590/revisions/1/mbox/
Test debugfs_test:
Subgroup read_all_entries:
pass -> DMESG-WARN (fi-bdw-gvtdvm) fdo#103938 +1
Test gem_exec_reloc:
Subgroup basic-cpu-active:
pass -> FAIL (fi-gdg-551) fdo#102582 +5
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-b:
pass -> INCOMPLETE (fi-snb-2520m) fdo#103713fdo#103938 https://bugs.freedesktop.org/show_bug.cgi?id=103938
fdo#102582 https://bugs.freedesktop.org/show_bug.cgi?id=102582
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:443s fi-bdw-gvtdvm total:288 pass:262 dwarn:2 dfail:0 fail:0 skip:24 time:440s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:391s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:519s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:280s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:498s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:502s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:483s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:469s fi-elk-e7500 total:288 pass:229 dwarn:0 dfail:0 fail:0 skip:59 time:423s fi-gdg-551 total:288 pass:172 dwarn:1 dfail:0 fail:7 skip:108 time:267s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:541s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:372s fi-hsw-4770r total:288 pass:224 dwarn:0 dfail:0 fail:0 skip:64 time:261s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:423s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:486s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:490s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:530s fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:476s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:532s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:587s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:450s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:539s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:563s fi-skl-6700k total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:514s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:497s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:451s fi-snb-2520m total:245 pass:211 dwarn:0 dfail:0 fail:0 skip:33 fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:416s Blacklisted hosts: fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:604s fi-cnl-y total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:557s fi-glk-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:486s
5144438448829ec2a3d94fd16a9e69a52cfa7b3b drm-tip: 2017y-11m-28d-17h-04m-56s UTC integration manifest db81ed658349 drm/i915/guc: Change default GuC FW for KBL to v9.3996994e15a550 drm/i915/guc: Change default GuC FW for BXT to v9.29aeb3a7c67b26 drm/i915/guc: Change default GuC FW for SKL to v9.33
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7332/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Joonas Lahtinen
maintainerQuoted 2 lines · Sagar Arun Kamble
With new GuC firmwares (SKL v9.33, BXT v9.29, KBL v9.39) available now at 01.org downloads, let us update the default firmware versions.
I thought the agreement was for them to be at linux-firmware repo?
Regards, Joonas
Signature · 7 lines
Joonas Lahtinen Open Source Technology Center Intel Corporation _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 4 lines · Joonas Lahtinen
Quoted 2 lines · Sagar Arun Kamble
With new GuC firmwares (SKL v9.33, BXT v9.29, KBL v9.39) available now at 01.org downloads, let us update the default firmware versions.
I thought the agreement was for them to be at linux-firmware repo?
Sorry. I should have mentioned linux-firmware.git. They are merged there.
Quoted 2 lines
Regards, Joonas
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 13 lines
-----Original Message-----
From: Joonas Lahtinen [mailto:[email protected]]
Sent: Tuesday, November 28, 2017 11:11 PM
To: Kamble, Sagar A <[email protected]>; intel- [email protected]
Cc: Spotswood, John A <[email protected]>; Srivatsa, Anusha <[email protected]>; Wajdeczko, Michal <[email protected]>; Vivi, Rodrigo <[email protected]>
Subject: Re: [PATCH v2 0/3] drm/i915/guc: Update default GuC FW for SKL/BXT/KBL
Quoted 5 lines
Quoted 2 lines · Sagar Arun Kamble
With new GuC firmwares (SKL v9.33, BXT v9.29, KBL v9.39) available now at 01.org downloads, let us update the default firmware versions.
I thought the agreement was for them to be at linux-firmware repo?
Yes.
@Sagar, slight change in commit message would be nice. Mention - linux-firware.git (since firmware is already merged there and that will be the one main point to find blobs moving forward) instead of 01.org.
Anusha
Quoted 5 lines
Regards, Joonas
--
Joonas Lahtinen
Open Source Technology Center
Intel Corporation
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915/guc: Update default GuC FW for SKL/BXT/KBL
In reply to Sagar Arun Kamble== Series Details ==
== Series Details ==
Series: drm/i915/guc: Update default GuC FW for SKL/BXT/KBL
URL : https://patchwork.freedesktop.org/series/34590/
State : success
== Summary ==
Blacklisted hosts:
shard-apl total:2436 pass:1501 dwarn:22 dfail:16 fail:13 skip:877 time:10965s shard-hsw total:2635 pass:1515 dwarn:9 dfail:0 fail:10 skip:1100 time:8840s shard-kbl total:2396 pass:1589 dwarn:21 dfail:12 fail:14 skip:752 time:8951s shard-snb total:2569 pass:1244 dwarn:16 dfail:6 fail:6 skip:1294 time:7325s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7332/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx