Skip to contentSkip to conversation

drm/i915/guc: Update default GuC FW for SKL/BXT/KBL

PATCH Superseded Sagar Arun Kamble 4 participants 9 messages Nov 29, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover drm/i915/guc: Update default GuC FW for SKL/BXT/KBL

With new GuC firmwares (SKL v9.33, BXT v9.29, KBL v9.39) available now at 01.org downloads, let us update the default firmware versions.

Cc Spotswood John A <[email protected]>
Cc Anusha Srivatsa <[email protected]>
Cc Michal Wajdeczko <[email protected]>
Cc Rodrigo Vivi <[email protected]>
Cc Joonas Lahtinen <[email protected]>

Sagar Arun Kamble (3):
drm/i915/guc: Change default GuC FW for SKL to v9.33 drm/i915/guc: Change default GuC FW for BXT to v9.29 drm/i915/guc: Change default GuC FW for KBL to v9.39

 drivers/gpu/drm/i915/intel_guc_fw.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v2 1/3 drm/i915/guc: Change default GuC FW for SKL to v9.33

This patch makes v9.33 firmware as default firmware for SKL.

Note: GuC logging control is changed with this firmware. GuC is expecting i915 to set control bit to enable "default logging" while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version specific change and can be handled entirely in GuC. It will need to be fixed in future firmwares.

This update includes (since v6.1):

- HuC RSA Keys updated.
- Adding per engine preemption support in GuC scheduler
- Minor bug fixes.
- Added support to log media reset count for host to read it
- Sub-feature level control for power management features.
- Minor clean-up for power management interface.
- Unified power management interface and scheduler interface into 1 file using same version.
- Bug Fix for multi context scheduler flag.
- DCC spec changes for BXT + DCT enabling
- SB based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Media engine Reset fix. Correctly marking context for resubmission in Media Reset case.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- Async FW in Engine Schedule feature (not enabled from KMD)
- GuC clean up to align developer build in line to production build.
- DCC consistency fix for SKL
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- Enabled WA for MSGCH hang issue
- Clear forcewake in CSB when SQ is empty.
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change.No functional change done as part of this check in.
- Enable decoupled freq for SKL GT4
- 3 tries of wake request needed from GuC2CSME for ME to wake up. Request has come from ME spec
- During reset one parameter was not getting accounted
- Enabling Guc Log changes for ultra low logging for OCA
- Enabling build failure check to catch critical section overflow.
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Synchronize SLPC internal debug interface with other branches.
- Fixing Issue with Default Guc Log changes for OCA using special Control Bit

v2: Rebase. Updated commit message.

Cc Spotswood John A <[email protected]>
Cc Anusha Srivatsa <[email protected]>
Cc Michal Wajdeczko <[email protected]>
Cc Rodrigo Vivi <[email protected]>
Cc Joonas Lahtinen <[email protected]>
---
 drivers/gpu/drm/i915/intel_guc_fw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_guc_fw.c +2 -2
index bbab4e1..631e932 100644
@@ -30,8 +30,8 @@
 #include "intel_guc_fw.h"
 #include "i915_drv.h"
 
-#define SKL_FW_MAJOR 6
-#define SKL_FW_MINOR 1
+#define SKL_FW_MAJOR 9
+#define SKL_FW_MINOR 33
 
 #define BXT_FW_MAJOR 8
 #define BXT_FW_MINOR 7
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH v2 2/3 drm/i915/guc: Change default GuC FW for BXT to v9.29

In reply to Sagar Arun Kamble

This patch makes v9.29 firmware as default firmware for BXT.

Note: GuC logging control is changed with this firmware. GuC is expecting i915 to set control bit to enable "default logging" while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version specific change and can be handled entirely in GuC. It will need to be fixed in future firmwares.

This update includes (since v8.7):

- Added support to log media reset count for host to read it
- BXT WA for fixing MTP hangs. WaDisableDOPRenderClkGatingAtSubmit
- Sub-feature level control for power management features.
- Minor clean-up for power management interface.
- Unified power management interface and scheduler interface into 1 file using same version.
- Bug Fix for multi context scheduler flag.
- DCC spec changes for BXT + DCT enabling
- Springboard based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Enabled IBC for BXT
- Media engine Reset fix. Correctly marking context for resubmission in Media Reset case.
- SLPC Dynamic RPe fix to resolve issues where incorrect frequency was set.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- GuC clean up to align developer build in line to production build.
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- Clear forcewake in CSB when SQ is empty.
- SLPC IBC 1.6 for APL to ensure multiplier does not cap IA below Pe.
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change. No functional change done as part of this check in.
- 3 tries of wake request needed from GuC2CSME for ME to wake up. Request has come from ME spec
- During reset one parameter was not getting accounted
- Enabling Guc Log changes for ultra low logging for OCA
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Fixing Issue with Default Guc Log changes for OCA using special Control Bit

v2: Rebase. Updated commit message.

Cc Spotswood John A <[email protected]>
Cc Anusha Srivatsa <[email protected]>
Cc Michal Wajdeczko <[email protected]>
Cc Rodrigo Vivi <[email protected]>
Cc Joonas Lahtinen <[email protected]>
---
 drivers/gpu/drm/i915/intel_guc_fw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_guc_fw.c +2 -2
index 631e932..df2ff96 100644
@@ -33,8 +33,8 @@
 #define SKL_FW_MAJOR 9
 #define SKL_FW_MINOR 33
 
-#define BXT_FW_MAJOR 8
-#define BXT_FW_MINOR 7
+#define BXT_FW_MAJOR 9
+#define BXT_FW_MINOR 29
 
 #define KBL_FW_MAJOR 9
 #define KBL_FW_MINOR 14
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH v2 3/3 drm/i915/guc: Change default GuC FW for KBL to v9.39

In reply to Sagar Arun Kamble

This patch makes v9.39 firmware as default firmware for KBL.

Note: GuC logging control is changed with this firmware. GuC is expecting i915 to set control bit to enable "default logging" while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version specific change and can be handled entirely in GuC. It will need to be fixed in future firmwares.

This update includes (since v9.14):

- DCC spec changes for BXT + DCT enabling
- Bug Fix for power conservation feature SLPC_DCC
- Scheduler 1-element submission during DCC cycles.
- SB based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Media engine Reset fix. Correctly marking context for resubmission in Media Reset case.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- Async FW in Engine Schedule feature (not enabled from KMD)
- GuC clean up to align developer build in line to production build.
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- GuC Msg Channel Hang WA - Stall GUC for mmio access when IDI is low during CPD flow.
- Fix for submit queue over flow issue
- Enabling IBC on KBL GT3 15W, GT4 45W
- Disabling wrong device ID WA in production signed kernel
- Enabling WA for MSGCH hang issue upto required KBL stepping
- Clear forcewake in CSB when SQ is empty.
- 3Tries of GuC2CSME wake request
- During reset one parameter was not getting accounted
- Disable DCC 1-elem mode submission
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change.No functional change done as part of this check in.
- Enabling Guc Log changes for ultra low logging for OCA
- Enabling Dynamic Render Power Well Hysteresis Programming for Compute Worklaods
- Enabling build failure check to catch critical section overflow.
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Synchronize SLPC internal debug interface with other branches.
- Fixing Issue with Default Guc Log changes for OCA using special Control Bit
- Aggressive DCC implementation for supported platforms.

v2: Rebase. Updated commit message.

Cc Spotswood John A <[email protected]>
Cc Anusha Srivatsa <[email protected]>
Cc Michal Wajdeczko <[email protected]>
Cc Rodrigo Vivi <[email protected]>
Cc Joonas Lahtinen <[email protected]>
---
 drivers/gpu/drm/i915/intel_guc_fw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_guc_fw.c +1 -1
index df2ff96..89862fa 100644
@@ -37,7 +37,7 @@
 #define BXT_FW_MINOR 29
 
 #define KBL_FW_MAJOR 9
-#define KBL_FW_MINOR 14
+#define KBL_FW_MINOR 39
 
 #define GLK_FW_MAJOR 10
 #define GLK_FW_MINOR 56
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

✓ Fi.CI.BAT: success for drm/i915/guc: Update default GuC FW for SKL/BXT/KBL

In reply to Sagar Arun Kamble
== Series Details ==

== Series Details ==

Series: drm/i915/guc: Update default GuC FW for SKL/BXT/KBL
URL : https://patchwork.freedesktop.org/series/34590/
State : success

== Summary ==

Series 34590v1 drm/i915/guc: Update default GuC FW for SKL/BXT/KBL
https://patchwork.freedesktop.org/api/1.0/series/34590/revisions/1/mbox/

Test debugfs_test:

        Subgroup read_all_entries:
                pass       -> DMESG-WARN (fi-bdw-gvtdvm) fdo#103938 +1
Test gem_exec_reloc:
        Subgroup basic-cpu-active:
                pass       -> FAIL       (fi-gdg-551) fdo#102582 +5
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-b:
                pass       -> INCOMPLETE (fi-snb-2520m) fdo#103713

fdo#103938 https://bugs.freedesktop.org/show_bug.cgi?id=103938
fdo#102582 https://bugs.freedesktop.org/show_bug.cgi?id=102582
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713

fi-bdw-5557u     total:288  pass:267  dwarn:0   dfail:0   fail:0   skip:21  time:443s
fi-bdw-gvtdvm    total:288  pass:262  dwarn:2   dfail:0   fail:0   skip:24  time:440s
fi-blb-e6850     total:288  pass:223  dwarn:1   dfail:0   fail:0   skip:64  time:391s
fi-bsw-n3050     total:288  pass:242  dwarn:0   dfail:0   fail:0   skip:46  time:519s
fi-bwr-2160      total:288  pass:183  dwarn:0   dfail:0   fail:0   skip:105 time:280s
fi-bxt-dsi       total:288  pass:258  dwarn:0   dfail:0   fail:0   skip:30  time:498s
fi-bxt-j4205     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:502s
fi-byt-j1900     total:288  pass:253  dwarn:0   dfail:0   fail:0   skip:35  time:483s
fi-byt-n2820     total:288  pass:249  dwarn:0   dfail:0   fail:0   skip:39  time:469s
fi-elk-e7500     total:288  pass:229  dwarn:0   dfail:0   fail:0   skip:59  time:423s
fi-gdg-551       total:288  pass:172  dwarn:1   dfail:0   fail:7   skip:108 time:267s
fi-glk-1         total:288  pass:260  dwarn:0   dfail:0   fail:0   skip:28  time:541s
fi-hsw-4770      total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:372s
fi-hsw-4770r     total:288  pass:224  dwarn:0   dfail:0   fail:0   skip:64  time:261s
fi-ilk-650       total:288  pass:228  dwarn:0   dfail:0   fail:0   skip:60  time:423s
fi-ivb-3520m     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:486s
fi-kbl-7500u     total:288  pass:263  dwarn:1   dfail:0   fail:0   skip:24  time:490s
fi-kbl-7560u     total:288  pass:269  dwarn:0   dfail:0   fail:0   skip:19  time:530s
fi-kbl-7567u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:476s
fi-kbl-r         total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:532s
fi-pnv-d510      total:288  pass:222  dwarn:1   dfail:0   fail:0   skip:65  time:587s
fi-skl-6260u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:450s
fi-skl-6600u     total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:539s
fi-skl-6700hq    total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:563s
fi-skl-6700k     total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:514s
fi-skl-6770hq    total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:497s
fi-skl-gvtdvm    total:288  pass:265  dwarn:0   dfail:0   fail:0   skip:23  time:451s
fi-snb-2520m     total:245  pass:211  dwarn:0   dfail:0   fail:0   skip:33 
fi-snb-2600      total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:416s
Blacklisted hosts:
fi-cfl-s2        total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:604s
fi-cnl-y         total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:557s
fi-glk-dsi       total:288  pass:258  dwarn:0   dfail:0   fail:0   skip:30  time:486s

5144438448829ec2a3d94fd16a9e69a52cfa7b3b drm-tip: 2017y-11m-28d-17h-04m-56s UTC integration manifest db81ed658349 drm/i915/guc: Change default GuC FW for KBL to v9.39
96994e15a550 drm/i915/guc: Change default GuC FW for BXT to v9.29
aeb3a7c67b26 drm/i915/guc: Change default GuC FW for SKL to v9.33

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7332/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#5 lore raw
In reply to Sagar Arun Kamble
Quoted 2 lines · Sagar Arun Kamble

With new GuC firmwares (SKL v9.33, BXT v9.29, KBL v9.39) available now at 01.org downloads, let us update the default firmware versions.

I thought the agreement was for them to be at linux-firmware repo?

Regards, Joonas

Signature · 7 lines
Joonas Lahtinen
Open Source Technology Center
Intel Corporation
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw
Quoted 4 lines · Joonas Lahtinen
Quoted 2 lines · Sagar Arun Kamble

With new GuC firmwares (SKL v9.33, BXT v9.29, KBL v9.39) available now at 01.org downloads, let us update the default firmware versions.

I thought the agreement was for them to be at linux-firmware repo?

Sorry. I should have mentioned linux-firmware.git. They are merged there.

Quoted 2 lines

Regards, Joonas

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#7 lore raw
In reply to Joonas Lahtinen
Quoted 13 lines

-----Original Message-----
From: Joonas Lahtinen [mailto:[email protected]]
Sent: Tuesday, November 28, 2017 11:11 PM
To: Kamble, Sagar A <[email protected]>; intel- [email protected]
Cc: Spotswood, John A <[email protected]>; Srivatsa, Anusha <[email protected]>; Wajdeczko, Michal <[email protected]>; Vivi, Rodrigo <[email protected]>
Subject: Re: [PATCH v2 0/3] drm/i915/guc: Update default GuC FW for SKL/BXT/KBL

Quoted 5 lines
Quoted 2 lines · Sagar Arun Kamble

With new GuC firmwares (SKL v9.33, BXT v9.29, KBL v9.39) available now at 01.org downloads, let us update the default firmware versions.

I thought the agreement was for them to be at linux-firmware repo?

Yes.
@Sagar, slight change in commit message would be nice. Mention - linux-firware.git (since firmware is already merged there and that will be the one main point to find blobs moving forward) instead of 01.org.

Anusha

Quoted 5 lines

Regards, Joonas
--
Joonas Lahtinen
Open Source Technology Center
Intel Corporation

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

✓ Fi.CI.IGT: success for drm/i915/guc: Update default GuC FW for SKL/BXT/KBL

In reply to Sagar Arun Kamble
== Series Details ==

== Series Details ==

Series: drm/i915/guc: Update default GuC FW for SKL/BXT/KBL
URL : https://patchwork.freedesktop.org/series/34590/
State : success

== Summary ==

Blacklisted hosts:

shard-apl        total:2436 pass:1501 dwarn:22  dfail:16  fail:13  skip:877 time:10965s
shard-hsw        total:2635 pass:1515 dwarn:9   dfail:0   fail:10  skip:1100 time:8840s
shard-kbl        total:2396 pass:1589 dwarn:21  dfail:12  fail:14  skip:752 time:8951s
shard-snb        total:2569 pass:1244 dwarn:16  dfail:6   fail:6   skip:1294 time:7325s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7332/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx