Fetcher failure for URL
Hello all,
When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :
"Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if available"
Inside the bb file, there are following descriptions for this URL:
SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct. myproject$git clone git://github.com/GENIVI/dlt-daemon.git
myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains e9a486a08fff6d3cc7133a350cec3ee10f463207
* master
I have no idea why such issue occurred for this URL when i use bitbake for build.
Thanks for help.
Following is the detail error log:
NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot: Succeeded
NOTE: Running task 689 of 5699 (ID: 569, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
WARNING: Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'
ERROR: Function failed: Fetcher failure for URL: 'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb, do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
WARNING: Checksum failure encountered with download of http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt other sources if available
WARNING: Renaming /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz to /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasks
SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
file://0004-Modify-systemd-config-directory.patch \
file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
file://0008-Header-and-payload-logging-fixed.patch \
file://0009-Enabled-mutex-priority-inheritance.patch \
file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
file://10-tmp-dlt.conf \
"SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
regards
Yong
Quoted 4 lines
Inside the bb file, there are following descriptions for this URL:
SRC_URI= "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
Interesting problem, for the sake of expertise/exercise I wanted to reproduce it in poky/referent YOCTO Project distro.
So I did create the dlp-daemon entry in my meta-mylayer, added layer on the top of poky 3 layers for such of the experiment:
user@localhost recipes-example]$ pwd /home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example [user@localhost recipes-example]$ ls -al
total 16
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script [user@localhost recipes-example]$ cd dlt-daemon/ [user@localhost dlt-daemon]$ ls -al
total 16
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
-rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb [user@localhost dlt-daemon]$
The bb recipe I took from:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=master
And I did modify it, in order for disable some inheritance I do not have. Concisely I know it will not configure, but the aim was just to see if I can
download it via bitbake script.
With the following in my modified recipe:
HOMEPAGE = "https://www.genivi.org/"
SECTION = "console/utils"
LICENSE = "MPLv2"LIC_FILES_CHKSUM = "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"
DEPENDS = "dbus zlib"
SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207" SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https" S = "${WORKDIR}/git"
## inherit gzipnative autotools gettext cmake systemd inherit autotools gettext cmake systemd
PACKAGES += "${PN}-systemd"SYSTEMD_PACKAGES = "${PN} ${PN}-systemd" SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service" SYSTEMD_AUTO_ENABLE_${PN} = "enable"
SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \
dlt-dbus.service \
dlt-adaptor-udp.service \
dlt-receive.service"SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"
EXTRA_OECMAKE = "-DWITH_SYSTEMD=ON"
FILES_${PN}-doc += "/usr/share/dlt-filetransfer"
do_install_append() {
rm -f ${D}${bindir}/dlt-test-*
}
It did indeed downloaded (CLI follows below as proof), but failed to configure (understandable, gzipnative does not exist in reference poky):
[user@localhost 2.15.0-r0]$ pwd /home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0 [user@localhost 2.15.0-r0]$ cd git
[user@localhost git]$ ls -al
total 148
drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..
-rw-r--r--. 1 user user 555 Dec 26 09:00 AUTHORS -rw-r--r--. 1 user user 209 Dec 26 09:00 automotive-dlt-c++.pc.in -rw-r--r--. 1 user user 789 Dec 26 09:00 automotive-dlt.pc.in -rw-r--r--. 1 user user 3694 Dec 26 09:00 automotive-dlt.spec.in drwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake -rw-r--r--. 1 user user 10616 Dec 26 09:00 CMakeLists.txt -rw-r--r--. 1 user user 460 Dec 26 09:00 COPYING -rw-r--r--. 1 user user 426 Dec 26 09:00 distfiles drwxr-xr-x. 3 user user 4096 Dec 26 09:00 doc drwxr-xr-x. 6 user user 4096 Dec 26 09:00 examples drwxr-xr-x. 8 user user 4096 Dec 26 09:00 .git -rw-r--r--. 1 user user 127 Dec 26 09:00 .gitignore drwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0 drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include -rw-r--r--. 1 user user 7441 Dec 26 09:00 INSTALL -rw-r--r--. 3 user user 16726 Dec 26 09:00 LICENSE -rw-r--r--. 1 user user 2629 Dec 26 09:00 README -rw-r--r--. 1 user user 27180 Dec 26 09:00 ReleaseNotes.txt drwxr-xr-x. 15 user user 4096 Dec 26 09:00 src drwxr-xr-x. 3 user user 4096 Dec 26 09:00 systemd drwxr-xr-x. 3 user user 4096 Dec 26 09:00 tests drwxr-xr-x. 4 user user 4096 Dec 26 09:00 testscripts
[user@localhost git]$
The download problem become visible with the original master recipe:
SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \
file://0002-Don-t-execute-processes-as-a-specific-user.patch \
file://0004-Modify-systemd-config-directory.patch \
"S = "${WORKDIR}/git"
Patch 0002 did not download. The same as you had for the original URI, but, in my case, it was just a 0002. ... .patch.
Hope this helps.
Zoran
Quoted 116 lines · Yong
Hello all,
When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :
"Failed to fetch URL
git://github.com/GENIVI/dlt-daemon.git;protocol=https,
attempting MIRRORS if available"Inside the bb file, there are following descriptions for this URL:
SRC_URI= "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct.
myproject$git clonegit://github.com/GENIVI/dlt-daemon.gitmyproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains
e9a486a08fff6d3cc7133a350cec3ee10f463207
* masterI have no idea why such issue occurred for this URL when i use bitbake for build.
Thanks for help.
Following is the detail error log:
NOTE: recipe gnome-common-native-3.14.0-r0: task
do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_populate_sysroot:
Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_populate_sysroot:
Succeeded
NOTE: Running task 689 of 5699 (ID: 569,/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: taskdo_fetch: Started
WARNING: Failed to fetch URLgit://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'ERROR: Function failed: Fetcher failure for URL:
'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
from any source.
ERROR: Logfile of failure stored in:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: taskdo_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025,/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb,do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: taskdo_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: taskdo_fetch: Succeeded
WARNING: Checksum failure encountered with download of
http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
other sources if available
WARNING: Renaming/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
to/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: taskdo_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: taskdo_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: taskdo_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: taskdo_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: taskdo_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: taskdo_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasksSRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \ file://0004-Modify-systemd-config-directory.patch \file://0005-Rework-of-initialization-cleanup-of-user-library.patch \ file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \ file://0008-Header-and-payload-logging-fixed.patch \ file://0009-Enabled-mutex-priority-inheritance.patch \ file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \ file://10-tmp-dlt.conf \ "SRCREV = "
e9a486a08fff6d3cc7133a350cec3ee10f463207"regards
Yong
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
hello Zoran,
thanks for your reply. I tried with your bb file, but there is still same problem. I suspect error may be caused by the "protocol=https", then I changed to "git://github.com/GENIVI/dlt-daemon.git;branch=master" ,
Fortunately there is no problem any more . Following is the result by using this change:
But i do not know the real root cause, if some one can let me understand it it will be very nice.
Myproject/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/git$ ls -al total 156
drwxr-xr-x 14 yong yong 4096 12月 28 10:55 .
drwxrwxr-x 13 yong yong 4096 12月 28 10:56 ..
-rw-r--r-- 1 yong yong 555 12月 28 10:55 AUTHORS -rw-r--r-- 1 yong yong 209 12月 28 10:55 automotive-dlt-c++.pc.in -rw-r--r-- 1 yong yong 789 12月 28 10:55 automotive-dlt.pc.in -rw-r--r-- 1 yong yong 3694 12月 28 10:55 automotive-dlt.spec.in drwxr-xr-x 2 yong yong 4096 12月 28 10:55 cmake -rw-r--r-- 1 yong yong 10593 12月 28 10:55 CMakeLists.txt -rw-r--r-- 1 yong yong 460 12月 28 10:55 COPYING -rw-r--r-- 1 yong yong 426 12月 28 10:55 distfiles drwxr-xr-x 3 yong yong 4096 12月 28 10:55 doc drwxr-xr-x 6 yong yong 4096 12月 28 10:55 examples drwxr-xr-x 8 yong yong 4096 12月 28 10:55 .git -rw-r--r-- 1 yong yong 127 12月 28 10:55 .gitignore drwxr-xr-x 16 yong yong 4096 12月 28 10:55 gtest-1.7.0 drwxr-xr-x 3 yong yong 4096 12月 28 10:55 include -rw-r--r-- 1 yong yong 7441 12月 28 10:55 INSTALL -rw-r--r-- 3 yong yong 16726 12月 28 10:55 LICENSE drwxrwxr-x 2 yong yong 4096 12月 28 10:55 patches drwxrwxr-x 9 yong yong 4096 12月 28 10:55 .pc -rw-r--r-- 1 yong yong 2629 12月 28 10:55 README -rw-r--r-- 1 yong yong 27180 12月 28 10:55 ReleaseNotes.txt drwxr-xr-x 15 yong yong 4096 12月 28 10:55 src drwxr-xr-x 3 yong yong 4096 12月 28 10:55 systemd drwxr-xr-x 3 yong yong 4096 12月 28 10:55 tests drwxr-xr-x 4 yong yong 4096 12月 28 10:55 testscripts
________________________________________
发件人: Zoran Stojsavljevic <[email protected]> 发送时间: 2017年12月26日 16:50
收件人: Hou, Yong
抄送: [email protected]
主题: Re: [yocto] Fetcher failure for URL
Quoted 4 lines
Inside the bb file, there are following descriptions for this URL:
SRC_URI= "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
Interesting problem, for the sake of expertise/exercise I wanted to reproduce it in poky/referent YOCTO Project distro.
So I did create the dlp-daemon entry in my meta-mylayer, added layer on the top of poky 3 layers for such of the experiment:
user@localhost recipes-example]$ pwd /home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example [user@localhost recipes-example]$ ls -al
total 16
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script [user@localhost recipes-example]$ cd dlt-daemon/ [user@localhost dlt-daemon]$ ls -al
total 16
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
-rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb [user@localhost dlt-daemon]$
The bb recipe I took from:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=master
And I did modify it, in order for disable some inheritance I do not have. Concisely I know it will not configure, but the aim was just to see if I can
download it via bitbake script.
With the following in my modified recipe:
HOMEPAGE = "https://www.genivi.org/"
SECTION = "console/utils"
LICENSE = "MPLv2"LIC_FILES_CHKSUM = "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"
DEPENDS = "dbus zlib"
SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207" SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https" S = "${WORKDIR}/git"
## inherit gzipnative autotools gettext cmake systemd inherit autotools gettext cmake systemd
PACKAGES += "${PN}-systemd"SYSTEMD_PACKAGES = "${PN} ${PN}-systemd" SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service" SYSTEMD_AUTO_ENABLE_${PN} = "enable"
SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \
dlt-dbus.service \
dlt-adaptor-udp.service \
dlt-receive.service"SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"
EXTRA_OECMAKE = "-DWITH_SYSTEMD=ON"
FILES_${PN}-doc += "/usr/share/dlt-filetransfer"
do_install_append() {
rm -f ${D}${bindir}/dlt-test-*
}
It did indeed downloaded (CLI follows below as proof), but failed to configure (understandable, gzipnative does not exist in reference poky):
[user@localhost 2.15.0-r0]$ pwd /home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0 [user@localhost 2.15.0-r0]$ cd git
[user@localhost git]$ ls -al
total 148
drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..
-rw-r--r--. 1 user user 555 Dec 26 09:00 AUTHORS -rw-r--r--. 1 user user 209 Dec 26 09:00 automotive-dlt-c++.pc.in -rw-r--r--. 1 user user 789 Dec 26 09:00 automotive-dlt.pc.in -rw-r--r--. 1 user user 3694 Dec 26 09:00 automotive-dlt.spec.in drwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake -rw-r--r--. 1 user user 10616 Dec 26 09:00 CMakeLists.txt -rw-r--r--. 1 user user 460 Dec 26 09:00 COPYING -rw-r--r--. 1 user user 426 Dec 26 09:00 distfiles drwxr-xr-x. 3 user user 4096 Dec 26 09:00 doc drwxr-xr-x. 6 user user 4096 Dec 26 09:00 examples drwxr-xr-x. 8 user user 4096 Dec 26 09:00 .git -rw-r--r--. 1 user user 127 Dec 26 09:00 .gitignore drwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0 drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include -rw-r--r--. 1 user user 7441 Dec 26 09:00 INSTALL -rw-r--r--. 3 user user 16726 Dec 26 09:00 LICENSE -rw-r--r--. 1 user user 2629 Dec 26 09:00 README -rw-r--r--. 1 user user 27180 Dec 26 09:00 ReleaseNotes.txt drwxr-xr-x. 15 user user 4096 Dec 26 09:00 src drwxr-xr-x. 3 user user 4096 Dec 26 09:00 systemd drwxr-xr-x. 3 user user 4096 Dec 26 09:00 tests drwxr-xr-x. 4 user user 4096 Dec 26 09:00 testscripts
[user@localhost git]$
The download problem become visible with the original master recipe:
SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"
SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \
file://0002-Don-t-execute-processes-as-a-specific-user.patch \
file://0004-Modify-systemd-config-directory.patch \
"S = "${WORKDIR}/git"
Patch 0002 did not download. The same as you had for the original URI, but, in my case, it was just a 0002. ... .patch.
Hope this helps.
Zoran
Quoted 116 lines · Yong
Hello all,
When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :
"Failed to fetch URL
git://github.com/GENIVI/dlt-daemon.git;protocol=https,
attempting MIRRORS if available"Inside the bb file, there are following descriptions for this URL:
SRC_URI= "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct.
myproject$git clonegit://github.com/GENIVI/dlt-daemon.gitmyproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains
e9a486a08fff6d3cc7133a350cec3ee10f463207
* masterI have no idea why such issue occurred for this URL when i use bitbake for build.
Thanks for help.
Following is the detail error log:
NOTE: recipe gnome-common-native-3.14.0-r0: task
do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_populate_sysroot:
Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_populate_sysroot:
Succeeded
NOTE: Running task 689 of 5699 (ID: 569,/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: taskdo_fetch: Started
WARNING: Failed to fetch URLgit://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'ERROR: Function failed: Fetcher failure for URL:
'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
from any source.
ERROR: Logfile of failure stored in:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: taskdo_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025,/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb,do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: taskdo_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: taskdo_fetch: Succeeded
WARNING: Checksum failure encountered with download of
http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
other sources if available
WARNING: Renaming/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
to/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: taskdo_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: taskdo_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: taskdo_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: taskdo_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: taskdo_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: taskdo_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasksSRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \ file://0004-Modify-systemd-config-directory.patch \file://0005-Rework-of-initialization-cleanup-of-user-library.patch \ file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \ file://0008-Header-and-payload-logging-fixed.patch \ file://0009-Enabled-mutex-priority-inheritance.patch \ file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \ file://10-tmp-dlt.conf \ "SRCREV = "
e9a486a08fff6d3cc7133a350cec3ee10f463207"regards
Yong
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 2 lines
I suspect error may be caused by the "protocol=https", then I changed to "
git://github.com/GENIVI/dlt-daemon.git;branch=master"...
Good observation. I use clones as close as to the latest HEAD (span from few days to several weeks).
Which does not explain what are the differences between poky distro 2.0.2 (used by you) and latest 2.4. In most cases, developers are using much more stable releases. So this mystery is still unsolved. With respect to the Real World out there.
Zoran
Quoted 281 lines · Yong
hello Zoran,
thanks for your reply. I tried with your bb file, but there is still same problem. I suspect error may be caused by the "protocol=https", then I changed to "
git://github.com/GENIVI/dlt-daemon.git;branch=master" ,
Fortunately there is no problem any more . Following is the result by using this change:
But i do not know the real root cause, if some one can let me understand it it will be very nice.Myproject/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/git$ ls -al total 156
drwxr-xr-x 14 yong yong 4096 12月 28 10:55 .
drwxrwxr-x 13 yong yong 4096 12月 28 10:56 ..(quoted diff) +0
-4-rw-r--r-- 1 yong yong 555 12月 28 10:55 AUTHORS -rw-r--r-- 1 yong yong 209 12月 28 10:55 automotive-dlt-c++.pc.in -rw-r--r-- 1 yong yong 789 12月 28 10:55 automotive-dlt.pc.in -rw-r--r-- 1 yong yong 3694 12月 28 10:55 automotive-dlt.spec.indrwxr-xr-x 2 yong yong 4096 12月 28 10:55 cmake
(quoted diff) +0
-3-rw-r--r-- 1 yong yong 10593 12月 28 10:55 CMakeLists.txt -rw-r--r-- 1 yong yong 460 12月 28 10:55 COPYING -rw-r--r-- 1 yong yong 426 12月 28 10:55 distfilesdrwxr-xr-x 3 yong yong 4096 12月 28 10:55 doc drwxr-xr-x 6 yong yong 4096 12月 28 10:55 examples drwxr-xr-x 8 yong yong 4096 12月 28 10:55 .git -rw-r--r-- 1 yong yong 127 12月 28 10:55 .gitignoredrwxr-xr-x 16 yong yong 4096 12月 28 10:55 gtest-1.7.0 drwxr-xr-x 3 yong yong 4096 12月 28 10:55 include
(quoted diff) +0
-2-rw-r--r-- 1 yong yong 7441 12月 28 10:55 INSTALL -rw-r--r-- 3 yong yong 16726 12月 28 10:55 LICENSEdrwxrwxr-x 2 yong yong 4096 12月 28 10:55 patches drwxrwxr-x 9 yong yong 4096 12月 28 10:55 .pc(quoted diff) +0
-2-rw-r--r-- 1 yong yong 2629 12月 28 10:55 README -rw-r--r-- 1 yong yong 27180 12月 28 10:55 ReleaseNotes.txtdrwxr-xr-x 15 yong yong 4096 12月 28 10:55 src drwxr-xr-x 3 yong yong 4096 12月 28 10:55 systemd drwxr-xr-x 3 yong yong 4096 12月 28 10:55 tests drwxr-xr-x 4 yong yong 4096 12月 28 10:55 testscripts________________________________________
发件人: Zoran Stojsavljevic <[email protected]> 发送时间: 2017年12月26日 16:50
收件人: Hou, Yong
抄送: [email protected]
主题: Re: [yocto] Fetcher failure for URLQuoted 4 lines
Inside the bb file, there are following descriptions for this URL:
SRC_URI= "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"Interesting problem, for the sake of expertise/exercise I wanted to reproduce it in poky/referent YOCTO Project distro.
So I did create the dlp-daemon entry in my meta-mylayer, added layer on the top of poky 3 layers for such of the experiment:
user@localhost recipes-example]$ pwd
/home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example[user@localhost recipes-example]$ ls -al
total 16
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script [user@localhost recipes-example]$ cd dlt-daemon/ [user@localhost dlt-daemon]$ ls -al
total 16
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
-rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb [user@localhost dlt-daemon]$The bb recipe I took from:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=masterAnd I did modify it, in order for disable some inheritance I do not have. Concisely I know it will not configure, but the aim was just to see if I can
download it via bitbake script.With the following in my modified recipe:
HOMEPAGE = "https://www.genivi.org/"
SECTION = "console/utils"
LICENSE = "MPLv2"LIC_FILES_CHKSUM= "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"DEPENDS = "dbus zlib"
SRCREV = "
e9a486a08fff6d3cc7133a350cec3ee10f463207"SRC_URI= "git://github.com/GENIVI/${BPN}.git;protocol=https" S = "${WORKDIR}/git"## inherit gzipnative autotools gettext cmake systemd inherit autotools gettext cmake systemd
PACKAGES += "${PN}-systemd"
SYSTEMD_PACKAGES= "${PN} ${PN}-systemd" SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service" SYSTEMD_AUTO_ENABLE_${PN} = "enable"SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \ dlt-dbus.service \ dlt-adaptor-udp.service \ dlt-receive.service"SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"
EXTRA_OECMAKE= "-DWITH_SYSTEMD=ON"FILES_${PN}-doc += "
/usr/share/dlt-filetransfer"do_install_append() { rm -f ${D}${bindir}/dlt-test-* }It did indeed downloaded (CLI follows below as proof), but failed to configure (understandable, gzipnative does not exist in reference poky):
[user@localhost 2.15.0-r0]$ pwd
/home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0[user@localhost 2.15.0-r0]$ cd git
[user@localhost git]$ ls -al
total 148
drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..(quoted diff) +0
-4-rw-r--r--. 1 user user 555 Dec 26 09:00 AUTHORS -rw-r--r--. 1 user user 209 Dec 26 09:00 automotive-dlt-c++.pc.in -rw-r--r--. 1 user user 789 Dec 26 09:00 automotive-dlt.pc.in -rw-r--r--. 1 user user 3694 Dec 26 09:00 automotive-dlt.spec.indrwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake
(quoted diff) +0
-3-rw-r--r--. 1 user user 10616 Dec 26 09:00 CMakeLists.txt -rw-r--r--. 1 user user 460 Dec 26 09:00 COPYING -rw-r--r--. 1 user user 426 Dec 26 09:00 distfilesdrwxr-xr-x. 3 user user 4096 Dec 26 09:00 doc drwxr-xr-x. 6 user user 4096 Dec 26 09:00 examples drwxr-xr-x. 8 user user 4096 Dec 26 09:00 .git -rw-r--r--. 1 user user 127 Dec 26 09:00 .gitignoredrwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0 drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include
(quoted diff) +0
-4-rw-r--r--. 1 user user 7441 Dec 26 09:00 INSTALL -rw-r--r--. 3 user user 16726 Dec 26 09:00 LICENSE -rw-r--r--. 1 user user 2629 Dec 26 09:00 README -rw-r--r--. 1 user user 27180 Dec 26 09:00 ReleaseNotes.txtdrwxr-xr-x. 15 user user 4096 Dec 26 09:00 src drwxr-xr-x. 3 user user 4096 Dec 26 09:00 systemd drwxr-xr-x. 3 user user 4096 Dec 26 09:00 tests drwxr-xr-x. 4 user user 4096 Dec 26 09:00 testscripts[user@localhost git]$
The download problem become visible with the original master recipe:
SRCREV = "
e9a486a08fff6d3cc7133a350cec3ee10f463207"SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \ file://0002-Don-t-execute-processes-as-a-specific-user.patch \ file://0004-Modify-systemd-config-directory.patch \ "S = "${WORKDIR}/git"
Patch 0002 did not download. The same as you had for the original URI, but, in my case, it was just a 0002. ... .patch.
Hope this helps.
Zoran
Quoted 116 lines · Yong
Hello all,
When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :
"Failed to fetch URL
git://github.com/GENIVI/dlt-daemon.git;protocol=https,
attempting MIRRORS if available"Inside the bb file, there are following descriptions for this URL:
SRC_URI= "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct.
myproject$git clonegit://github.com/GENIVI/dlt-daemon.gitmyproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains
e9a486a08fff6d3cc7133a350cec3ee10f463207
* masterI have no idea why such issue occurred for this URL when i use bitbake for build.
Thanks for help.
Following is the detail error log:
NOTE: recipe gnome-common-native-3.14.0-r0: task
do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_populate_sysroot:
Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_populate_sysroot:
Succeeded
NOTE: Running task 689 of 5699 (ID: 569,/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: taskdo_fetch: Started
WARNING: Failed to fetch URLgit://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'ERROR: Function failed: Fetcher failure for URL:
'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
from any source.
ERROR: Logfile of failure stored in:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: taskdo_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025,/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb,do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: taskdo_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: taskdo_fetch: Succeeded
WARNING: Checksum failure encountered with download of
http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
other sources if available
WARNING: Renaming/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
to/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: taskdo_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: taskdo_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: taskdo_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: taskdo_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: taskdo_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: taskdo_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasksSRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \ file://0004-Modify-systemd-config-directory.patch \file://0005-Rework-of-initialization-cleanup-of-user-library.patch \ file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \ file://0008-Header-and-payload-logging-fixed.patch \ file://0009-Enabled-mutex-priority-inheritance.patch \ file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \ file://10-tmp-dlt.conf \ "SRCREV = "
e9a486a08fff6d3cc7133a350cec3ee10f463207"regards
Yong
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
I think i got the root cause that in my environment " https protocol" does not link to git-remote-https tool , I edit my bash profile file in ~/.bash_profile :
"PATH=$PATH:/usr/lib/git-core" where the git-remote-https installed.
and the issue is resolved completely.
so the conclusion is: the git tool environment shall be prepared properly in order to fetch code based https protocol.
regards
Yong
________________________________________
发件人: Zoran Stojsavljevic <[email protected]> 发送时间: 2017年12月28日 12:38
收件人: Hou, Yong
抄送: [email protected]
主题: Re: 答复: [yocto] Fetcher failure for URL
Quoted 2 lines
I suspect error may be caused by the "protocol=https", then I changed to "
git://github.com/GENIVI/dlt-daemon.git;branch=master"...
Good observation. I use clones as close as to the latest HEAD (span from few days to several weeks).
Which does not explain what are the differences between poky distro 2.0.2 (used by you) and latest 2.4. In most cases, developers are using much more stable releases. So this mystery is still unsolved. With respect to the Real World out there.
Zoran
Quoted 281 lines · Yong
hello Zoran,
thanks for your reply. I tried with your bb file, but there is still same problem. I suspect error may be caused by the "protocol=https", then I changed to "
git://github.com/GENIVI/dlt-daemon.git;branch=master" ,
Fortunately there is no problem any more . Following is the result by using this change:
But i do not know the real root cause, if some one can let me understand it it will be very nice.Myproject/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/git$ ls -al total 156
drwxr-xr-x 14 yong yong 4096 12月 28 10:55 .
drwxrwxr-x 13 yong yong 4096 12月 28 10:56 ..(quoted diff) +0
-4-rw-r--r-- 1 yong yong 555 12月 28 10:55 AUTHORS -rw-r--r-- 1 yong yong 209 12月 28 10:55 automotive-dlt-c++.pc.in -rw-r--r-- 1 yong yong 789 12月 28 10:55 automotive-dlt.pc.in -rw-r--r-- 1 yong yong 3694 12月 28 10:55 automotive-dlt.spec.indrwxr-xr-x 2 yong yong 4096 12月 28 10:55 cmake
(quoted diff) +0
-3-rw-r--r-- 1 yong yong 10593 12月 28 10:55 CMakeLists.txt -rw-r--r-- 1 yong yong 460 12月 28 10:55 COPYING -rw-r--r-- 1 yong yong 426 12月 28 10:55 distfilesdrwxr-xr-x 3 yong yong 4096 12月 28 10:55 doc drwxr-xr-x 6 yong yong 4096 12月 28 10:55 examples drwxr-xr-x 8 yong yong 4096 12月 28 10:55 .git -rw-r--r-- 1 yong yong 127 12月 28 10:55 .gitignoredrwxr-xr-x 16 yong yong 4096 12月 28 10:55 gtest-1.7.0 drwxr-xr-x 3 yong yong 4096 12月 28 10:55 include
(quoted diff) +0
-2-rw-r--r-- 1 yong yong 7441 12月 28 10:55 INSTALL -rw-r--r-- 3 yong yong 16726 12月 28 10:55 LICENSEdrwxrwxr-x 2 yong yong 4096 12月 28 10:55 patches drwxrwxr-x 9 yong yong 4096 12月 28 10:55 .pc(quoted diff) +0
-2-rw-r--r-- 1 yong yong 2629 12月 28 10:55 README -rw-r--r-- 1 yong yong 27180 12月 28 10:55 ReleaseNotes.txtdrwxr-xr-x 15 yong yong 4096 12月 28 10:55 src drwxr-xr-x 3 yong yong 4096 12月 28 10:55 systemd drwxr-xr-x 3 yong yong 4096 12月 28 10:55 tests drwxr-xr-x 4 yong yong 4096 12月 28 10:55 testscripts________________________________________
发件人: Zoran Stojsavljevic <[email protected]> 发送时间: 2017年12月26日 16:50
收件人: Hou, Yong
抄送: [email protected]
主题: Re: [yocto] Fetcher failure for URLQuoted 4 lines
Inside the bb file, there are following descriptions for this URL:
SRC_URI= "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"Interesting problem, for the sake of expertise/exercise I wanted to reproduce it in poky/referent YOCTO Project distro.
So I did create the dlp-daemon entry in my meta-mylayer, added layer on the top of poky 3 layers for such of the experiment:
user@localhost recipes-example]$ pwd
/home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example[user@localhost recipes-example]$ ls -al
total 16
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script [user@localhost recipes-example]$ cd dlt-daemon/ [user@localhost dlt-daemon]$ ls -al
total 16
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
-rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb [user@localhost dlt-daemon]$The bb recipe I took from:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=masterAnd I did modify it, in order for disable some inheritance I do not have. Concisely I know it will not configure, but the aim was just to see if I can
download it via bitbake script.With the following in my modified recipe:
HOMEPAGE = "https://www.genivi.org/"
SECTION = "console/utils"
LICENSE = "MPLv2"LIC_FILES_CHKSUM= "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"DEPENDS = "dbus zlib"
SRCREV = "
e9a486a08fff6d3cc7133a350cec3ee10f463207"SRC_URI= "git://github.com/GENIVI/${BPN}.git;protocol=https" S = "${WORKDIR}/git"## inherit gzipnative autotools gettext cmake systemd inherit autotools gettext cmake systemd
PACKAGES += "${PN}-systemd"
SYSTEMD_PACKAGES= "${PN} ${PN}-systemd" SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service" SYSTEMD_AUTO_ENABLE_${PN} = "enable"SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \ dlt-dbus.service \ dlt-adaptor-udp.service \ dlt-receive.service"SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"
EXTRA_OECMAKE= "-DWITH_SYSTEMD=ON"FILES_${PN}-doc += "
/usr/share/dlt-filetransfer"do_install_append() { rm -f ${D}${bindir}/dlt-test-* }It did indeed downloaded (CLI follows below as proof), but failed to configure (understandable, gzipnative does not exist in reference poky):
[user@localhost 2.15.0-r0]$ pwd
/home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0[user@localhost 2.15.0-r0]$ cd git
[user@localhost git]$ ls -al
total 148
drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..(quoted diff) +0
-4-rw-r--r--. 1 user user 555 Dec 26 09:00 AUTHORS -rw-r--r--. 1 user user 209 Dec 26 09:00 automotive-dlt-c++.pc.in -rw-r--r--. 1 user user 789 Dec 26 09:00 automotive-dlt.pc.in -rw-r--r--. 1 user user 3694 Dec 26 09:00 automotive-dlt.spec.indrwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake
(quoted diff) +0
-3-rw-r--r--. 1 user user 10616 Dec 26 09:00 CMakeLists.txt -rw-r--r--. 1 user user 460 Dec 26 09:00 COPYING -rw-r--r--. 1 user user 426 Dec 26 09:00 distfilesdrwxr-xr-x. 3 user user 4096 Dec 26 09:00 doc drwxr-xr-x. 6 user user 4096 Dec 26 09:00 examples drwxr-xr-x. 8 user user 4096 Dec 26 09:00 .git -rw-r--r--. 1 user user 127 Dec 26 09:00 .gitignoredrwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0 drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include
(quoted diff) +0
-4-rw-r--r--. 1 user user 7441 Dec 26 09:00 INSTALL -rw-r--r--. 3 user user 16726 Dec 26 09:00 LICENSE -rw-r--r--. 1 user user 2629 Dec 26 09:00 README -rw-r--r--. 1 user user 27180 Dec 26 09:00 ReleaseNotes.txtdrwxr-xr-x. 15 user user 4096 Dec 26 09:00 src drwxr-xr-x. 3 user user 4096 Dec 26 09:00 systemd drwxr-xr-x. 3 user user 4096 Dec 26 09:00 tests drwxr-xr-x. 4 user user 4096 Dec 26 09:00 testscripts[user@localhost git]$
The download problem become visible with the original master recipe:
SRCREV = "
e9a486a08fff6d3cc7133a350cec3ee10f463207"SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \ file://0002-Don-t-execute-processes-as-a-specific-user.patch \ file://0004-Modify-systemd-config-directory.patch \ "S = "${WORKDIR}/git"
Patch 0002 did not download. The same as you had for the original URI, but, in my case, it was just a 0002. ... .patch.
Hope this helps.
Zoran
Quoted 116 lines · Yong
Hello all,
When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :
"Failed to fetch URL
git://github.com/GENIVI/dlt-daemon.git;protocol=https,
attempting MIRRORS if available"Inside the bb file, there are following descriptions for this URL:
SRC_URI= "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct.
myproject$git clonegit://github.com/GENIVI/dlt-daemon.gitmyproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains
e9a486a08fff6d3cc7133a350cec3ee10f463207
* masterI have no idea why such issue occurred for this URL when i use bitbake for build.
Thanks for help.
Following is the detail error log:
NOTE: recipe gnome-common-native-3.14.0-r0: task
do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_populate_sysroot:
Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_populate_sysroot:
Succeeded
NOTE: Running task 689 of 5699 (ID: 569,/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: taskdo_fetch: Started
WARNING: Failed to fetch URLgit://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'ERROR: Function failed: Fetcher failure for URL:
'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
from any source.
ERROR: Logfile of failure stored in:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: taskdo_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025,/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb,do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: taskdo_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: taskdo_fetch: Succeeded
WARNING: Checksum failure encountered with download of
http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
other sources if available
WARNING: Renaming/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
to/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: taskdo_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: taskdo_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: taskdo_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: taskdo_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: taskdo_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: taskdo_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasksSRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \ file://0004-Modify-systemd-config-directory.patch \file://0005-Rework-of-initialization-cleanup-of-user-library.patch \ file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \ file://0008-Header-and-payload-logging-fixed.patch \ file://0009-Enabled-mutex-priority-inheritance.patch \ file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \ file://10-tmp-dlt.conf \ "SRCREV = "
e9a486a08fff6d3cc7133a350cec3ee10f463207"regards
Yong
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 4 lines
I think i got the root cause that in my environment "https protocol" does not link to git-remote-https tool , I edit my bash profile file in\
~/.bash_profile : "PATH=$PATH:/usr/lib/git-core" where the git-remote-https installed. and the issue is resolved completely.
Interesting... ?! I use Fedora 27 as a host, and git-core/ is not in my PATH variable either.
[user@localhost bin]$ uname -r
4.14.8-300.fc27.x86_64
[user@localhost bin]$ echo $PATH /usr/libexec/python2-sphinx:/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/home/user/.local/bin:/home/user/bin [user@localhost usr]$ find . -name git-remote-https
./libexec/git-core/git-remote-https
[user@localhost usr]$ which git-remote-https/usr/bin/which: no git-remote-https in (/usr/libexec/python2-sphinx:/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/home/user/.local/bin:/home/user/bin) [user@localhost usr]$
But for me initial method works.
Anyway, thank you for sharing your solution (one more thing to consider).
Zoran
_______
Quoted 311 lines · Yong
I think i got the root cause that in my environment " https protocol" does not link to git-remote-https tool , I edit my bash profile file in ~/.bash_profile :
"PATH=$PATH:/usr/lib/git-core" where the git-remote-https installed.
and the issue is resolved completely.so the conclusion is: the git tool environment shall be prepared properly in order to fetch code based https protocol.
regards
Yong________________________________________
发件人: Zoran Stojsavljevic <[email protected]> 发送时间: 2017年12月28日 12:38
收件人: Hou, Yong
抄送: [email protected]
主题: Re: 答复: [yocto] Fetcher failure for URLQuoted 2 lines
I suspect error may be caused by the "protocol=https", then I changed to "
git://github.com/GENIVI/dlt-daemon.git;branch=master"...Good observation. I use clones as close as to the latest HEAD (span from few days to several weeks).
Which does not explain what are the differences between poky distro 2.0.2 (used by you) and latest 2.4. In most cases, developers are using much more stable releases. So this mystery is still unsolved. With respect to the Real World out there.
Zoran
Quoted 281 lines · Yong
hello Zoran,
thanks for your reply. I tried with your bb file, but there is still same problem. I suspect error may be caused by the "protocol=https", then I changed to "
git://github.com/GENIVI/dlt-daemon.git;branch=master" ,
Fortunately there is no problem any more . Following is the result by using this change:
But i do not know the real root cause, if some one can let me understand it it will be very nice.Myproject/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/git$ ls -al total 156
drwxr-xr-x 14 yong yong 4096 12月 28 10:55 .
drwxrwxr-x 13 yong yong 4096 12月 28 10:56 ..(quoted diff) +0
-4-rw-r--r-- 1 yong yong 555 12月 28 10:55 AUTHORS -rw-r--r-- 1 yong yong 209 12月 28 10:55 automotive-dlt-c++.pc.in -rw-r--r-- 1 yong yong 789 12月 28 10:55 automotive-dlt.pc.in -rw-r--r-- 1 yong yong 3694 12月 28 10:55 automotive-dlt.spec.indrwxr-xr-x 2 yong yong 4096 12月 28 10:55 cmake
(quoted diff) +0
-3-rw-r--r-- 1 yong yong 10593 12月 28 10:55 CMakeLists.txt -rw-r--r-- 1 yong yong 460 12月 28 10:55 COPYING -rw-r--r-- 1 yong yong 426 12月 28 10:55 distfilesdrwxr-xr-x 3 yong yong 4096 12月 28 10:55 doc drwxr-xr-x 6 yong yong 4096 12月 28 10:55 examples drwxr-xr-x 8 yong yong 4096 12月 28 10:55 .git -rw-r--r-- 1 yong yong 127 12月 28 10:55 .gitignoredrwxr-xr-x 16 yong yong 4096 12月 28 10:55 gtest-1.7.0 drwxr-xr-x 3 yong yong 4096 12月 28 10:55 include
(quoted diff) +0
-2-rw-r--r-- 1 yong yong 7441 12月 28 10:55 INSTALL -rw-r--r-- 3 yong yong 16726 12月 28 10:55 LICENSEdrwxrwxr-x 2 yong yong 4096 12月 28 10:55 patches drwxrwxr-x 9 yong yong 4096 12月 28 10:55 .pc(quoted diff) +0
-2-rw-r--r-- 1 yong yong 2629 12月 28 10:55 README -rw-r--r-- 1 yong yong 27180 12月 28 10:55 ReleaseNotes.txtdrwxr-xr-x 15 yong yong 4096 12月 28 10:55 src drwxr-xr-x 3 yong yong 4096 12月 28 10:55 systemd drwxr-xr-x 3 yong yong 4096 12月 28 10:55 tests drwxr-xr-x 4 yong yong 4096 12月 28 10:55 testscripts________________________________________
发件人: Zoran Stojsavljevic <[email protected]> 发送时间: 2017年12月26日 16:50
收件人: Hou, Yong
抄送: [email protected]
主题: Re: [yocto] Fetcher failure for URLQuoted 4 lines
Inside the bb file, there are following descriptions for this URL:
SRC_URI= "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"Interesting problem, for the sake of expertise/exercise I wanted to reproduce it in poky/referent YOCTO Project distro.
So I did create the dlp-daemon entry in my meta-mylayer, added layer on the top of poky 3 layers for such of the experiment:
user@localhost recipes-example]$ pwd
/home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example[user@localhost recipes-example]$ ls -al
total 16
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script [user@localhost recipes-example]$ cd dlt-daemon/ [user@localhost dlt-daemon]$ ls -al
total 16
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
-rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb [user@localhost dlt-daemon]$The bb recipe I took from:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=masterAnd I did modify it, in order for disable some inheritance I do not have. Concisely I know it will not configure, but the aim was just to see if I can
download it via bitbake script.With the following in my modified recipe:
HOMEPAGE = "https://www.genivi.org/"
SECTION = "console/utils"
LICENSE = "MPLv2"LIC_FILES_CHKSUM= "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"DEPENDS = "dbus zlib"
SRCREV = "
e9a486a08fff6d3cc7133a350cec3ee10f463207"SRC_URI= "git://github.com/GENIVI/${BPN}.git;protocol=https" S = "${WORKDIR}/git"## inherit gzipnative autotools gettext cmake systemd inherit autotools gettext cmake systemd
PACKAGES += "${PN}-systemd"
SYSTEMD_PACKAGES= "${PN} ${PN}-systemd" SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service" SYSTEMD_AUTO_ENABLE_${PN} = "enable"SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \ dlt-dbus.service \ dlt-adaptor-udp.service \ dlt-receive.service"SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"
EXTRA_OECMAKE= "-DWITH_SYSTEMD=ON"FILES_${PN}-doc += "
/usr/share/dlt-filetransfer"do_install_append() { rm -f ${D}${bindir}/dlt-test-* }It did indeed downloaded (CLI follows below as proof), but failed to configure (understandable, gzipnative does not exist in reference poky):
[user@localhost 2.15.0-r0]$ pwd
/home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0[user@localhost 2.15.0-r0]$ cd git
[user@localhost git]$ ls -al
total 148
drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..(quoted diff) +0
-4-rw-r--r--. 1 user user 555 Dec 26 09:00 AUTHORS -rw-r--r--. 1 user user 209 Dec 26 09:00 automotive-dlt-c++.pc.in -rw-r--r--. 1 user user 789 Dec 26 09:00 automotive-dlt.pc.in -rw-r--r--. 1 user user 3694 Dec 26 09:00 automotive-dlt.spec.indrwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake
(quoted diff) +0
-3-rw-r--r--. 1 user user 10616 Dec 26 09:00 CMakeLists.txt -rw-r--r--. 1 user user 460 Dec 26 09:00 COPYING -rw-r--r--. 1 user user 426 Dec 26 09:00 distfilesdrwxr-xr-x. 3 user user 4096 Dec 26 09:00 doc drwxr-xr-x. 6 user user 4096 Dec 26 09:00 examples drwxr-xr-x. 8 user user 4096 Dec 26 09:00 .git -rw-r--r--. 1 user user 127 Dec 26 09:00 .gitignoredrwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0 drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include
(quoted diff) +0
-4-rw-r--r--. 1 user user 7441 Dec 26 09:00 INSTALL -rw-r--r--. 3 user user 16726 Dec 26 09:00 LICENSE -rw-r--r--. 1 user user 2629 Dec 26 09:00 README -rw-r--r--. 1 user user 27180 Dec 26 09:00 ReleaseNotes.txtdrwxr-xr-x. 15 user user 4096 Dec 26 09:00 src drwxr-xr-x. 3 user user 4096 Dec 26 09:00 systemd drwxr-xr-x. 3 user user 4096 Dec 26 09:00 tests drwxr-xr-x. 4 user user 4096 Dec 26 09:00 testscripts[user@localhost git]$
The download problem become visible with the original master recipe:
SRCREV = "
e9a486a08fff6d3cc7133a350cec3ee10f463207"SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \ file://0002-Don-t-execute-processes-as-a-specific-user.patch \ file://0004-Modify-systemd-config-directory.patch \ "S = "${WORKDIR}/git"
Patch 0002 did not download. The same as you had for the original URI, but, in my case, it was just a 0002. ... .patch.
Hope this helps.
Zoran
Quoted 116 lines · Yong
Hello all,
When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :
"Failed to fetch URL
git://github.com/GENIVI/dlt-daemon.git;protocol=https,
attempting MIRRORS if available"Inside the bb file, there are following descriptions for this URL:
SRC_URI= "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct.
myproject$git clonegit://github.com/GENIVI/dlt-daemon.gitmyproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains
e9a486a08fff6d3cc7133a350cec3ee10f463207
* masterI have no idea why such issue occurred for this URL when i use bitbake for build.
Thanks for help.
Following is the detail error log:
NOTE: recipe gnome-common-native-3.14.0-r0: task
do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb,do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_populate_sysroot:
Started
NOTE: recipe gnome-common-native-3.14.0-r0: taskdo_populate_sysroot:
Succeeded
NOTE: Running task 689 of 5699 (ID: 569,/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: taskdo_fetch: Started
WARNING: Failed to fetch URLgit://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'ERROR: Function failed: Fetcher failure for URL:
'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
from any source.
ERROR: Logfile of failure stored in:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: taskdo_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb,do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025,/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb,do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: taskdo_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: taskdo_fetch: Succeeded
WARNING: Checksum failure encountered with download of
http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
other sources if available
WARNING: Renaming/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
to/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: taskdo_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: taskdo_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: taskdo_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: taskdo_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: taskdo_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: taskdo_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasksSRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \ file://0004-Modify-systemd-config-directory.patch \file://0005-Rework-of-initialization-cleanup-of-user-library.patch \ file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \ file://0008-Header-and-payload-logging-fixed.patch \ file://0009-Enabled-mutex-priority-inheritance.patch \ file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \ file://10-tmp-dlt.conf \ "SRCREV = "
e9a486a08fff6d3cc7133a350cec3ee10f463207"regards
Yong
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto