Skip to contentSkip to conversation

Fetcher failure for URL

DISCUSSION Hou, Yong 2 participants 6 messages Dec 26, 2017 – Dec 28, 2017

lore
Share & tools
lore

Hou, Yong

author
#0 lore raw

Hello all,

When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :

"Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if available"

Inside the bb file, there are following descriptions for this URL:

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct. myproject$git clone git://github.com/GENIVI/dlt-daemon.git

myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains e9a486a08fff6d3cc7133a350cec3ee10f463207
* master

I have no idea why such issue occurred for this URL when i use bitbake for build.

Thanks for help.

Following is the detail error log:

NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot: Succeeded
NOTE: Running task 689 of 5699 (ID: 569, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
WARNING: Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'

ERROR: Function failed: Fetcher failure for URL: 'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb, do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
WARNING: Checksum failure encountered with download of http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt other sources if available
WARNING: Renaming /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz to /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasks

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
           file://0004-Modify-systemd-config-directory.patch \
           file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
           file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
           file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
           file://0008-Header-and-payload-logging-fixed.patch \
           file://0009-Enabled-mutex-priority-inheritance.patch \
           file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
           file://10-tmp-dlt.conf \
           "

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

regards

Yong

#1 lore raw
Quoted 4 lines

Inside the bb file, there are following descriptions for this URL:

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

Interesting problem, for the sake of expertise/exercise I wanted to reproduce it in poky/referent YOCTO Project distro.

So I did create the dlp-daemon entry in my meta-mylayer, added layer on the top of poky 3 layers for such of the experiment:

user@localhost recipes-example]$ pwd /home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example [user@localhost recipes-example]$ ls -al
total 16
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script [user@localhost recipes-example]$ cd dlt-daemon/ [user@localhost dlt-daemon]$ ls -al
total 16
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
-rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb [user@localhost dlt-daemon]$

The bb recipe I took from:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=master

And I did modify it, in order for disable some inheritance I do not have. Concisely I know it will not configure, but the aim was just to see if I can
download it via bitbake script.

With the following in my modified recipe:

HOMEPAGE = "https://www.genivi.org/"
SECTION = "console/utils"
LICENSE = "MPLv2"
LIC_FILES_CHKSUM = "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"

DEPENDS = "dbus zlib"

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207" SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https" S = "${WORKDIR}/git"

## inherit gzipnative autotools gettext cmake systemd inherit autotools gettext cmake systemd

PACKAGES += "${PN}-systemd"
SYSTEMD_PACKAGES = "${PN} ${PN}-systemd" SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service" SYSTEMD_AUTO_ENABLE_${PN} = "enable"

SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \
    dlt-dbus.service \
    dlt-adaptor-udp.service \
    dlt-receive.service"

SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"

EXTRA_OECMAKE = "-DWITH_SYSTEMD=ON"

FILES_${PN}-doc += "/usr/share/dlt-filetransfer"

do_install_append() {
rm -f ${D}${bindir}/dlt-test-*
}

It did indeed downloaded (CLI follows below as proof), but failed to configure (understandable, gzipnative does not exist in reference poky):

[user@localhost 2.15.0-r0]$ pwd /home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0 [user@localhost 2.15.0-r0]$ cd git
[user@localhost git]$ ls -al
total 148
drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..

-rw-r--r--.  1 user user   555 Dec 26 09:00 AUTHORS
-rw-r--r--.  1 user user   209 Dec 26 09:00 automotive-dlt-c++.pc.in
-rw-r--r--.  1 user user   789 Dec 26 09:00 automotive-dlt.pc.in
-rw-r--r--.  1 user user  3694 Dec 26 09:00 automotive-dlt.spec.in
drwxr-xr-x.  2 user user  4096 Dec 26 09:00 cmake
-rw-r--r--.  1 user user 10616 Dec 26 09:00 CMakeLists.txt
-rw-r--r--.  1 user user   460 Dec 26 09:00 COPYING
-rw-r--r--.  1 user user   426 Dec 26 09:00 distfiles
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 doc
drwxr-xr-x.  6 user user  4096 Dec 26 09:00 examples
drwxr-xr-x.  8 user user  4096 Dec 26 09:00 .git
-rw-r--r--.  1 user user   127 Dec 26 09:00 .gitignore
drwxr-xr-x. 16 user user  4096 Dec 26 09:00 gtest-1.7.0
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 include
-rw-r--r--.  1 user user  7441 Dec 26 09:00 INSTALL
-rw-r--r--.  3 user user 16726 Dec 26 09:00 LICENSE
-rw-r--r--.  1 user user  2629 Dec 26 09:00 README
-rw-r--r--.  1 user user 27180 Dec 26 09:00 ReleaseNotes.txt
drwxr-xr-x. 15 user user  4096 Dec 26 09:00 src
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 systemd
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 tests
drwxr-xr-x.  4 user user  4096 Dec 26 09:00 testscripts

[user@localhost git]$

The download problem become visible with the original master recipe:

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \
    file://0002-Don-t-execute-processes-as-a-specific-user.patch \
    file://0004-Modify-systemd-config-directory.patch \
    "

S = "${WORKDIR}/git"

Patch 0002 did not download. The same as you had for the original URI, but, in my case, it was just a 0002. ... .patch.

Hope this helps.

Zoran

Quoted 116 lines · Yong

Hello all,

When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :

"Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https,
attempting MIRRORS if available"

Inside the bb file, there are following descriptions for this URL:

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct.
myproject$git clone git://github.com/GENIVI/dlt-daemon.git

myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains e9a486a08fff6d3cc7133a350cec3ee10f463207
* master

I have no idea why such issue occurred for this URL when i use bitbake for build.

Thanks for help.

Following is the detail error log:

NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
Succeeded
NOTE: Running task 689 of 5699 (ID: 569, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
WARNING: Failed to fetch URL
git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
from any source.
ERROR: Logfile of failure stored in:
/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb, do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
WARNING: Checksum failure encountered with download of
http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
other sources if available
WARNING: Renaming
/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
to /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasks

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
           file://0004-Modify-systemd-config-directory.patch \
file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
           file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
           file://0008-Header-and-payload-logging-fixed.patch \
           file://0009-Enabled-mutex-priority-inheritance.patch \
           file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
           file://10-tmp-dlt.conf \
           "

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

regards

Yong

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

author
#2 lore raw

hello Zoran,

thanks for your reply. I tried with your bb file, but there is still same problem. I suspect error may be caused by the "protocol=https", then I changed to "git://github.com/GENIVI/dlt-daemon.git;branch=master" ,
Fortunately there is no problem any more . Following is the result by using this change:
But i do not know the real root cause, if some one can let me understand it it will be very nice.

Myproject/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/git$ ls -al total 156
drwxr-xr-x 14 yong yong 4096 12月 28 10:55 .
drwxrwxr-x 13 yong yong 4096 12月 28 10:56 ..

-rw-r--r--  1 yong yong   555 12月 28 10:55 AUTHORS
-rw-r--r--  1 yong yong   209 12月 28 10:55 automotive-dlt-c++.pc.in
-rw-r--r--  1 yong yong   789 12月 28 10:55 automotive-dlt.pc.in
-rw-r--r--  1 yong yong  3694 12月 28 10:55 automotive-dlt.spec.in
drwxr-xr-x  2 yong yong  4096 12月 28 10:55 cmake
-rw-r--r--  1 yong yong 10593 12月 28 10:55 CMakeLists.txt
-rw-r--r--  1 yong yong   460 12月 28 10:55 COPYING
-rw-r--r--  1 yong yong   426 12月 28 10:55 distfiles
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 doc
drwxr-xr-x  6 yong yong  4096 12月 28 10:55 examples
drwxr-xr-x  8 yong yong  4096 12月 28 10:55 .git
-rw-r--r--  1 yong yong   127 12月 28 10:55 .gitignore
drwxr-xr-x 16 yong yong  4096 12月 28 10:55 gtest-1.7.0
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 include
-rw-r--r--  1 yong yong  7441 12月 28 10:55 INSTALL
-rw-r--r--  3 yong yong 16726 12月 28 10:55 LICENSE
drwxrwxr-x  2 yong yong  4096 12月 28 10:55 patches
drwxrwxr-x  9 yong yong  4096 12月 28 10:55 .pc
-rw-r--r--  1 yong yong  2629 12月 28 10:55 README
-rw-r--r--  1 yong yong 27180 12月 28 10:55 ReleaseNotes.txt
drwxr-xr-x 15 yong yong  4096 12月 28 10:55 src
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 systemd
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 tests
drwxr-xr-x  4 yong yong  4096 12月 28 10:55 testscripts

________________________________________
发件人: Zoran Stojsavljevic <[email protected]> 发送时间: 2017年12月26日 16:50
收件人: Hou, Yong
抄送: [email protected]
主题: Re: [yocto] Fetcher failure for URL

Quoted 4 lines

Inside the bb file, there are following descriptions for this URL:

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

Interesting problem, for the sake of expertise/exercise I wanted to reproduce it in poky/referent YOCTO Project distro.

So I did create the dlp-daemon entry in my meta-mylayer, added layer on the top of poky 3 layers for such of the experiment:

user@localhost recipes-example]$ pwd /home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example [user@localhost recipes-example]$ ls -al
total 16
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script [user@localhost recipes-example]$ cd dlt-daemon/ [user@localhost dlt-daemon]$ ls -al
total 16
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
-rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb [user@localhost dlt-daemon]$

The bb recipe I took from:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=master

And I did modify it, in order for disable some inheritance I do not have. Concisely I know it will not configure, but the aim was just to see if I can
download it via bitbake script.

With the following in my modified recipe:

HOMEPAGE = "https://www.genivi.org/"
SECTION = "console/utils"
LICENSE = "MPLv2"
LIC_FILES_CHKSUM = "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"

DEPENDS = "dbus zlib"

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207" SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https" S = "${WORKDIR}/git"

## inherit gzipnative autotools gettext cmake systemd inherit autotools gettext cmake systemd

PACKAGES += "${PN}-systemd"
SYSTEMD_PACKAGES = "${PN} ${PN}-systemd" SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service" SYSTEMD_AUTO_ENABLE_${PN} = "enable"

SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \
    dlt-dbus.service \
    dlt-adaptor-udp.service \
    dlt-receive.service"

SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"

EXTRA_OECMAKE = "-DWITH_SYSTEMD=ON"

FILES_${PN}-doc += "/usr/share/dlt-filetransfer"

do_install_append() {
rm -f ${D}${bindir}/dlt-test-*
}

It did indeed downloaded (CLI follows below as proof), but failed to configure (understandable, gzipnative does not exist in reference poky):

[user@localhost 2.15.0-r0]$ pwd /home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0 [user@localhost 2.15.0-r0]$ cd git
[user@localhost git]$ ls -al
total 148
drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..

-rw-r--r--.  1 user user   555 Dec 26 09:00 AUTHORS
-rw-r--r--.  1 user user   209 Dec 26 09:00 automotive-dlt-c++.pc.in
-rw-r--r--.  1 user user   789 Dec 26 09:00 automotive-dlt.pc.in
-rw-r--r--.  1 user user  3694 Dec 26 09:00 automotive-dlt.spec.in
drwxr-xr-x.  2 user user  4096 Dec 26 09:00 cmake
-rw-r--r--.  1 user user 10616 Dec 26 09:00 CMakeLists.txt
-rw-r--r--.  1 user user   460 Dec 26 09:00 COPYING
-rw-r--r--.  1 user user   426 Dec 26 09:00 distfiles
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 doc
drwxr-xr-x.  6 user user  4096 Dec 26 09:00 examples
drwxr-xr-x.  8 user user  4096 Dec 26 09:00 .git
-rw-r--r--.  1 user user   127 Dec 26 09:00 .gitignore
drwxr-xr-x. 16 user user  4096 Dec 26 09:00 gtest-1.7.0
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 include
-rw-r--r--.  1 user user  7441 Dec 26 09:00 INSTALL
-rw-r--r--.  3 user user 16726 Dec 26 09:00 LICENSE
-rw-r--r--.  1 user user  2629 Dec 26 09:00 README
-rw-r--r--.  1 user user 27180 Dec 26 09:00 ReleaseNotes.txt
drwxr-xr-x. 15 user user  4096 Dec 26 09:00 src
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 systemd
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 tests
drwxr-xr-x.  4 user user  4096 Dec 26 09:00 testscripts

[user@localhost git]$

The download problem become visible with the original master recipe:

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \
    file://0002-Don-t-execute-processes-as-a-specific-user.patch \
    file://0004-Modify-systemd-config-directory.patch \
    "

S = "${WORKDIR}/git"

Patch 0002 did not download. The same as you had for the original URI, but, in my case, it was just a 0002. ... .patch.

Hope this helps.

Zoran

Quoted 116 lines · Yong

Hello all,

When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :

"Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https,
attempting MIRRORS if available"

Inside the bb file, there are following descriptions for this URL:

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct.
myproject$git clone git://github.com/GENIVI/dlt-daemon.git

myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains e9a486a08fff6d3cc7133a350cec3ee10f463207
* master

I have no idea why such issue occurred for this URL when i use bitbake for build.

Thanks for help.

Following is the detail error log:

NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
Succeeded
NOTE: Running task 689 of 5699 (ID: 569, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
WARNING: Failed to fetch URL
git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
from any source.
ERROR: Logfile of failure stored in:
/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb, do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
WARNING: Checksum failure encountered with download of
http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
other sources if available
WARNING: Renaming
/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
to /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasks

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
           file://0004-Modify-systemd-config-directory.patch \
file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
           file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
           file://0008-Header-and-payload-logging-fixed.patch \
           file://0009-Enabled-mutex-priority-inheritance.patch \
           file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
           file://10-tmp-dlt.conf \
           "

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

regards

Yong

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#3 lore raw
Quoted 2 lines

I suspect error may be caused by the "protocol=https", then I changed to "git://github.com/GENIVI/dlt-daemon.git;branch=master"...

Good observation. I use clones as close as to the latest HEAD (span from few days to several weeks).

Which does not explain what are the differences between poky distro 2.0.2 (used by you) and latest 2.4. In most cases, developers are using much more stable releases. So this mystery is still unsolved. With respect to the Real World out there.

Zoran

Quoted 281 lines · Yong

hello Zoran,

thanks for your reply. I tried with your bb file, but there is still same problem. I suspect error may be caused by the "protocol=https", then I changed to "git://github.com/GENIVI/dlt-daemon.git;branch=master" ,
Fortunately there is no problem any more . Following is the result by using this change:
But i do not know the real root cause, if some one can let me understand it it will be very nice.

Myproject/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/git$ ls -al total 156
drwxr-xr-x 14 yong yong 4096 12月 28 10:55 .
drwxrwxr-x 13 yong yong 4096 12月 28 10:56 ..

(quoted diff) +0 -4
-rw-r--r--  1 yong yong   555 12月 28 10:55 AUTHORS
-rw-r--r--  1 yong yong   209 12月 28 10:55 automotive-dlt-c++.pc.in
-rw-r--r--  1 yong yong   789 12月 28 10:55 automotive-dlt.pc.in
-rw-r--r--  1 yong yong  3694 12月 28 10:55 automotive-dlt.spec.in

drwxr-xr-x 2 yong yong 4096 12月 28 10:55 cmake

(quoted diff) +0 -3
-rw-r--r--  1 yong yong 10593 12月 28 10:55 CMakeLists.txt
-rw-r--r--  1 yong yong   460 12月 28 10:55 COPYING
-rw-r--r--  1 yong yong   426 12月 28 10:55 distfiles
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 doc
drwxr-xr-x  6 yong yong  4096 12月 28 10:55 examples
drwxr-xr-x  8 yong yong  4096 12月 28 10:55 .git
-rw-r--r--  1 yong yong   127 12月 28 10:55 .gitignore

drwxr-xr-x 16 yong yong 4096 12月 28 10:55 gtest-1.7.0 drwxr-xr-x 3 yong yong 4096 12月 28 10:55 include

(quoted diff) +0 -2
-rw-r--r--  1 yong yong  7441 12月 28 10:55 INSTALL
-rw-r--r--  3 yong yong 16726 12月 28 10:55 LICENSE
drwxrwxr-x  2 yong yong  4096 12月 28 10:55 patches
drwxrwxr-x  9 yong yong  4096 12月 28 10:55 .pc
(quoted diff) +0 -2
-rw-r--r--  1 yong yong  2629 12月 28 10:55 README
-rw-r--r--  1 yong yong 27180 12月 28 10:55 ReleaseNotes.txt
drwxr-xr-x 15 yong yong  4096 12月 28 10:55 src
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 systemd
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 tests
drwxr-xr-x  4 yong yong  4096 12月 28 10:55 testscripts

________________________________________
发件人: Zoran Stojsavljevic <[email protected]> 发送时间: 2017年12月26日 16:50
收件人: Hou, Yong
抄送: [email protected]
主题: Re: [yocto] Fetcher failure for URL

Quoted 4 lines

Inside the bb file, there are following descriptions for this URL:

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

Interesting problem, for the sake of expertise/exercise I wanted to reproduce it in poky/referent YOCTO Project distro.

So I did create the dlp-daemon entry in my meta-mylayer, added layer on the top of poky 3 layers for such of the experiment:

user@localhost recipes-example]$ pwd /home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example [user@localhost recipes-example]$ ls -al
total 16
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script [user@localhost recipes-example]$ cd dlt-daemon/ [user@localhost dlt-daemon]$ ls -al
total 16
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
-rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb [user@localhost dlt-daemon]$

The bb recipe I took from:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=master

And I did modify it, in order for disable some inheritance I do not have. Concisely I know it will not configure, but the aim was just to see if I can
download it via bitbake script.

With the following in my modified recipe:

HOMEPAGE = "https://www.genivi.org/"
SECTION = "console/utils"
LICENSE = "MPLv2"
LIC_FILES_CHKSUM = "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"

DEPENDS = "dbus zlib"

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207" SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https" S = "${WORKDIR}/git"

## inherit gzipnative autotools gettext cmake systemd inherit autotools gettext cmake systemd

PACKAGES += "${PN}-systemd"
SYSTEMD_PACKAGES = "${PN} ${PN}-systemd" SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service" SYSTEMD_AUTO_ENABLE_${PN} = "enable"

SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \
    dlt-dbus.service \
    dlt-adaptor-udp.service \
    dlt-receive.service"

SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"

EXTRA_OECMAKE = "-DWITH_SYSTEMD=ON"

FILES_${PN}-doc += "/usr/share/dlt-filetransfer"

do_install_append() {
   rm -f ${D}${bindir}/dlt-test-*
}

It did indeed downloaded (CLI follows below as proof), but failed to configure (understandable, gzipnative does not exist in reference poky):

[user@localhost 2.15.0-r0]$ pwd /home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0 [user@localhost 2.15.0-r0]$ cd git
[user@localhost git]$ ls -al
total 148
drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..

(quoted diff) +0 -4
-rw-r--r--.  1 user user   555 Dec 26 09:00 AUTHORS
-rw-r--r--.  1 user user   209 Dec 26 09:00 automotive-dlt-c++.pc.in
-rw-r--r--.  1 user user   789 Dec 26 09:00 automotive-dlt.pc.in
-rw-r--r--.  1 user user  3694 Dec 26 09:00 automotive-dlt.spec.in

drwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake

(quoted diff) +0 -3
-rw-r--r--.  1 user user 10616 Dec 26 09:00 CMakeLists.txt
-rw-r--r--.  1 user user   460 Dec 26 09:00 COPYING
-rw-r--r--.  1 user user   426 Dec 26 09:00 distfiles
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 doc
drwxr-xr-x.  6 user user  4096 Dec 26 09:00 examples
drwxr-xr-x.  8 user user  4096 Dec 26 09:00 .git
-rw-r--r--.  1 user user   127 Dec 26 09:00 .gitignore

drwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0 drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include

(quoted diff) +0 -4
-rw-r--r--.  1 user user  7441 Dec 26 09:00 INSTALL
-rw-r--r--.  3 user user 16726 Dec 26 09:00 LICENSE
-rw-r--r--.  1 user user  2629 Dec 26 09:00 README
-rw-r--r--.  1 user user 27180 Dec 26 09:00 ReleaseNotes.txt
drwxr-xr-x. 15 user user  4096 Dec 26 09:00 src
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 systemd
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 tests
drwxr-xr-x.  4 user user  4096 Dec 26 09:00 testscripts

[user@localhost git]$

The download problem become visible with the original master recipe:

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \
    file://0002-Don-t-execute-processes-as-a-specific-user.patch \
    file://0004-Modify-systemd-config-directory.patch \
    "

S = "${WORKDIR}/git"

Patch 0002 did not download. The same as you had for the original URI, but, in my case, it was just a 0002. ... .patch.

Hope this helps.

Zoran

Quoted 116 lines · Yong

Hello all,

When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :

"Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https,
attempting MIRRORS if available"

Inside the bb file, there are following descriptions for this URL:

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct.
myproject$git clone git://github.com/GENIVI/dlt-daemon.git

myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains e9a486a08fff6d3cc7133a350cec3ee10f463207
* master

I have no idea why such issue occurred for this URL when i use bitbake for build.

Thanks for help.

Following is the detail error log:

NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
Succeeded
NOTE: Running task 689 of 5699 (ID: 569, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
WARNING: Failed to fetch URL
git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
from any source.
ERROR: Logfile of failure stored in:
/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb, do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
WARNING: Checksum failure encountered with download of
http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
other sources if available
WARNING: Renaming
/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
to /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasks

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
           file://0004-Modify-systemd-config-directory.patch \
file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
           file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
           file://0008-Header-and-payload-logging-fixed.patch \
           file://0009-Enabled-mutex-priority-inheritance.patch \
           file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
           file://10-tmp-dlt.conf \
           "

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

regards

Yong

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

author
#4 lore raw

I think i got the root cause that in my environment " https protocol" does not link to git-remote-https tool , I edit my bash profile file in ~/.bash_profile :
"PATH=$PATH:/usr/lib/git-core" where the git-remote-https installed.
and the issue is resolved completely.

so the conclusion is: the git tool environment shall be prepared properly in order to fetch code based https protocol.

regards
Yong

________________________________________
发件人: Zoran Stojsavljevic <[email protected]> 发送时间: 2017年12月28日 12:38
收件人: Hou, Yong
抄送: [email protected]
主题: Re: 答复: [yocto] Fetcher failure for URL

Quoted 2 lines

I suspect error may be caused by the "protocol=https", then I changed to "git://github.com/GENIVI/dlt-daemon.git;branch=master"...

Good observation. I use clones as close as to the latest HEAD (span from few days to several weeks).

Which does not explain what are the differences between poky distro 2.0.2 (used by you) and latest 2.4. In most cases, developers are using much more stable releases. So this mystery is still unsolved. With respect to the Real World out there.

Zoran

Quoted 281 lines · Yong

hello Zoran,

thanks for your reply. I tried with your bb file, but there is still same problem. I suspect error may be caused by the "protocol=https", then I changed to "git://github.com/GENIVI/dlt-daemon.git;branch=master" ,
Fortunately there is no problem any more . Following is the result by using this change:
But i do not know the real root cause, if some one can let me understand it it will be very nice.

Myproject/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/git$ ls -al total 156
drwxr-xr-x 14 yong yong 4096 12月 28 10:55 .
drwxrwxr-x 13 yong yong 4096 12月 28 10:56 ..

(quoted diff) +0 -4
-rw-r--r--  1 yong yong   555 12月 28 10:55 AUTHORS
-rw-r--r--  1 yong yong   209 12月 28 10:55 automotive-dlt-c++.pc.in
-rw-r--r--  1 yong yong   789 12月 28 10:55 automotive-dlt.pc.in
-rw-r--r--  1 yong yong  3694 12月 28 10:55 automotive-dlt.spec.in

drwxr-xr-x 2 yong yong 4096 12月 28 10:55 cmake

(quoted diff) +0 -3
-rw-r--r--  1 yong yong 10593 12月 28 10:55 CMakeLists.txt
-rw-r--r--  1 yong yong   460 12月 28 10:55 COPYING
-rw-r--r--  1 yong yong   426 12月 28 10:55 distfiles
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 doc
drwxr-xr-x  6 yong yong  4096 12月 28 10:55 examples
drwxr-xr-x  8 yong yong  4096 12月 28 10:55 .git
-rw-r--r--  1 yong yong   127 12月 28 10:55 .gitignore

drwxr-xr-x 16 yong yong 4096 12月 28 10:55 gtest-1.7.0 drwxr-xr-x 3 yong yong 4096 12月 28 10:55 include

(quoted diff) +0 -2
-rw-r--r--  1 yong yong  7441 12月 28 10:55 INSTALL
-rw-r--r--  3 yong yong 16726 12月 28 10:55 LICENSE
drwxrwxr-x  2 yong yong  4096 12月 28 10:55 patches
drwxrwxr-x  9 yong yong  4096 12月 28 10:55 .pc
(quoted diff) +0 -2
-rw-r--r--  1 yong yong  2629 12月 28 10:55 README
-rw-r--r--  1 yong yong 27180 12月 28 10:55 ReleaseNotes.txt
drwxr-xr-x 15 yong yong  4096 12月 28 10:55 src
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 systemd
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 tests
drwxr-xr-x  4 yong yong  4096 12月 28 10:55 testscripts

________________________________________
发件人: Zoran Stojsavljevic <[email protected]> 发送时间: 2017年12月26日 16:50
收件人: Hou, Yong
抄送: [email protected]
主题: Re: [yocto] Fetcher failure for URL

Quoted 4 lines

Inside the bb file, there are following descriptions for this URL:

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

Interesting problem, for the sake of expertise/exercise I wanted to reproduce it in poky/referent YOCTO Project distro.

So I did create the dlp-daemon entry in my meta-mylayer, added layer on the top of poky 3 layers for such of the experiment:

user@localhost recipes-example]$ pwd /home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example [user@localhost recipes-example]$ ls -al
total 16
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script [user@localhost recipes-example]$ cd dlt-daemon/ [user@localhost dlt-daemon]$ ls -al
total 16
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
-rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb [user@localhost dlt-daemon]$

The bb recipe I took from:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=master

And I did modify it, in order for disable some inheritance I do not have. Concisely I know it will not configure, but the aim was just to see if I can
download it via bitbake script.

With the following in my modified recipe:

HOMEPAGE = "https://www.genivi.org/"
SECTION = "console/utils"
LICENSE = "MPLv2"
LIC_FILES_CHKSUM = "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"

DEPENDS = "dbus zlib"

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207" SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https" S = "${WORKDIR}/git"

## inherit gzipnative autotools gettext cmake systemd inherit autotools gettext cmake systemd

PACKAGES += "${PN}-systemd"
SYSTEMD_PACKAGES = "${PN} ${PN}-systemd" SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service" SYSTEMD_AUTO_ENABLE_${PN} = "enable"

SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \
    dlt-dbus.service \
    dlt-adaptor-udp.service \
    dlt-receive.service"

SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"

EXTRA_OECMAKE = "-DWITH_SYSTEMD=ON"

FILES_${PN}-doc += "/usr/share/dlt-filetransfer"

do_install_append() {
   rm -f ${D}${bindir}/dlt-test-*
}

It did indeed downloaded (CLI follows below as proof), but failed to configure (understandable, gzipnative does not exist in reference poky):

[user@localhost 2.15.0-r0]$ pwd /home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0 [user@localhost 2.15.0-r0]$ cd git
[user@localhost git]$ ls -al
total 148
drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..

(quoted diff) +0 -4
-rw-r--r--.  1 user user   555 Dec 26 09:00 AUTHORS
-rw-r--r--.  1 user user   209 Dec 26 09:00 automotive-dlt-c++.pc.in
-rw-r--r--.  1 user user   789 Dec 26 09:00 automotive-dlt.pc.in
-rw-r--r--.  1 user user  3694 Dec 26 09:00 automotive-dlt.spec.in

drwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake

(quoted diff) +0 -3
-rw-r--r--.  1 user user 10616 Dec 26 09:00 CMakeLists.txt
-rw-r--r--.  1 user user   460 Dec 26 09:00 COPYING
-rw-r--r--.  1 user user   426 Dec 26 09:00 distfiles
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 doc
drwxr-xr-x.  6 user user  4096 Dec 26 09:00 examples
drwxr-xr-x.  8 user user  4096 Dec 26 09:00 .git
-rw-r--r--.  1 user user   127 Dec 26 09:00 .gitignore

drwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0 drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include

(quoted diff) +0 -4
-rw-r--r--.  1 user user  7441 Dec 26 09:00 INSTALL
-rw-r--r--.  3 user user 16726 Dec 26 09:00 LICENSE
-rw-r--r--.  1 user user  2629 Dec 26 09:00 README
-rw-r--r--.  1 user user 27180 Dec 26 09:00 ReleaseNotes.txt
drwxr-xr-x. 15 user user  4096 Dec 26 09:00 src
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 systemd
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 tests
drwxr-xr-x.  4 user user  4096 Dec 26 09:00 testscripts

[user@localhost git]$

The download problem become visible with the original master recipe:

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \
    file://0002-Don-t-execute-processes-as-a-specific-user.patch \
    file://0004-Modify-systemd-config-directory.patch \
    "

S = "${WORKDIR}/git"

Patch 0002 did not download. The same as you had for the original URI, but, in my case, it was just a 0002. ... .patch.

Hope this helps.

Zoran

Quoted 116 lines · Yong

Hello all,

When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :

"Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https,
attempting MIRRORS if available"

Inside the bb file, there are following descriptions for this URL:

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct.
myproject$git clone git://github.com/GENIVI/dlt-daemon.git

myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains e9a486a08fff6d3cc7133a350cec3ee10f463207
* master

I have no idea why such issue occurred for this URL when i use bitbake for build.

Thanks for help.

Following is the detail error log:

NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
Succeeded
NOTE: Running task 689 of 5699 (ID: 569, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
WARNING: Failed to fetch URL
git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
from any source.
ERROR: Logfile of failure stored in:
/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb, do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
WARNING: Checksum failure encountered with download of
http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
other sources if available
WARNING: Renaming
/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
to /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasks

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
           file://0004-Modify-systemd-config-directory.patch \
file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
           file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
           file://0008-Header-and-payload-logging-fixed.patch \
           file://0009-Enabled-mutex-priority-inheritance.patch \
           file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
           file://10-tmp-dlt.conf \
           "

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

regards

Yong

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#5 lore raw
Quoted 4 lines

I think i got the root cause that in my environment "https protocol" does not link to git-remote-https tool , I edit my bash profile file in\
~/.bash_profile : "PATH=$PATH:/usr/lib/git-core" where the git-remote-https installed. and the issue is resolved completely.

Interesting... ?! I use Fedora 27 as a host, and git-core/ is not in my PATH variable either.

[user@localhost bin]$ uname -r
4.14.8-300.fc27.x86_64
[user@localhost bin]$ echo $PATH /usr/libexec/python2-sphinx:/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/home/user/.local/bin:/home/user/bin [user@localhost usr]$ find . -name git-remote-https
./libexec/git-core/git-remote-https
[user@localhost usr]$ which git-remote-https
/usr/bin/which: no git-remote-https in (/usr/libexec/python2-sphinx:/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/home/user/.local/bin:/home/user/bin) [user@localhost usr]$

But for me initial method works.

Anyway, thank you for sharing your solution (one more thing to consider).

Zoran
_______

Quoted 311 lines · Yong

I think i got the root cause that in my environment " https protocol" does not link to git-remote-https tool , I edit my bash profile file in ~/.bash_profile :
"PATH=$PATH:/usr/lib/git-core" where the git-remote-https installed.
and the issue is resolved completely.

so the conclusion is: the git tool environment shall be prepared properly in order to fetch code based https protocol.

regards
Yong

________________________________________
发件人: Zoran Stojsavljevic <[email protected]> 发送时间: 2017年12月28日 12:38
收件人: Hou, Yong
抄送: [email protected]
主题: Re: 答复: [yocto] Fetcher failure for URL

Quoted 2 lines

I suspect error may be caused by the "protocol=https", then I changed to "git://github.com/GENIVI/dlt-daemon.git;branch=master"...

Good observation. I use clones as close as to the latest HEAD (span from few days to several weeks).

Which does not explain what are the differences between poky distro 2.0.2 (used by you) and latest 2.4. In most cases, developers are using much more stable releases. So this mystery is still unsolved. With respect to the Real World out there.

Zoran

Quoted 281 lines · Yong

hello Zoran,

thanks for your reply. I tried with your bb file, but there is still same problem. I suspect error may be caused by the "protocol=https", then I changed to "git://github.com/GENIVI/dlt-daemon.git;branch=master" ,
Fortunately there is no problem any more . Following is the result by using this change:
But i do not know the real root cause, if some one can let me understand it it will be very nice.

Myproject/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/git$ ls -al total 156
drwxr-xr-x 14 yong yong 4096 12月 28 10:55 .
drwxrwxr-x 13 yong yong 4096 12月 28 10:56 ..

(quoted diff) +0 -4
-rw-r--r--  1 yong yong   555 12月 28 10:55 AUTHORS
-rw-r--r--  1 yong yong   209 12月 28 10:55 automotive-dlt-c++.pc.in
-rw-r--r--  1 yong yong   789 12月 28 10:55 automotive-dlt.pc.in
-rw-r--r--  1 yong yong  3694 12月 28 10:55 automotive-dlt.spec.in

drwxr-xr-x 2 yong yong 4096 12月 28 10:55 cmake

(quoted diff) +0 -3
-rw-r--r--  1 yong yong 10593 12月 28 10:55 CMakeLists.txt
-rw-r--r--  1 yong yong   460 12月 28 10:55 COPYING
-rw-r--r--  1 yong yong   426 12月 28 10:55 distfiles
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 doc
drwxr-xr-x  6 yong yong  4096 12月 28 10:55 examples
drwxr-xr-x  8 yong yong  4096 12月 28 10:55 .git
-rw-r--r--  1 yong yong   127 12月 28 10:55 .gitignore

drwxr-xr-x 16 yong yong 4096 12月 28 10:55 gtest-1.7.0 drwxr-xr-x 3 yong yong 4096 12月 28 10:55 include

(quoted diff) +0 -2
-rw-r--r--  1 yong yong  7441 12月 28 10:55 INSTALL
-rw-r--r--  3 yong yong 16726 12月 28 10:55 LICENSE
drwxrwxr-x  2 yong yong  4096 12月 28 10:55 patches
drwxrwxr-x  9 yong yong  4096 12月 28 10:55 .pc
(quoted diff) +0 -2
-rw-r--r--  1 yong yong  2629 12月 28 10:55 README
-rw-r--r--  1 yong yong 27180 12月 28 10:55 ReleaseNotes.txt
drwxr-xr-x 15 yong yong  4096 12月 28 10:55 src
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 systemd
drwxr-xr-x  3 yong yong  4096 12月 28 10:55 tests
drwxr-xr-x  4 yong yong  4096 12月 28 10:55 testscripts

________________________________________
发件人: Zoran Stojsavljevic <[email protected]> 发送时间: 2017年12月26日 16:50
收件人: Hou, Yong
抄送: [email protected]
主题: Re: [yocto] Fetcher failure for URL

Quoted 4 lines

Inside the bb file, there are following descriptions for this URL:

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

Interesting problem, for the sake of expertise/exercise I wanted to reproduce it in poky/referent YOCTO Project distro.

So I did create the dlp-daemon entry in my meta-mylayer, added layer on the top of poky 3 layers for such of the experiment:

user@localhost recipes-example]$ pwd /home/user/YOCTO/oe_core_embedded/poky/meta-mylayer/recipes-example [user@localhost recipes-example]$ ls -al
total 16
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 .
drwxrwxr-x. 4 user user 4096 Nov 19 13:15 ..
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 dlt-daemon drwxrwxr-x. 3 user user 4096 Dec 26 07:37 script [user@localhost recipes-example]$ cd dlt-daemon/ [user@localhost dlt-daemon]$ ls -al
total 16
drwxrwxr-x. 2 user user 4096 Dec 26 08:59 .
drwxrwxr-x. 4 user user 4096 Dec 26 08:55 ..
-rw-rw-r--. 1 user user 1370 Dec 26 08:59 dlt-daemon_2.15.0.bb [user@localhost dlt-daemon]$

The bb recipe I took from:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/meta-ivi/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb?h=master

And I did modify it, in order for disable some inheritance I do not have. Concisely I know it will not configure, but the aim was just to see if I can
download it via bitbake script.

With the following in my modified recipe:

HOMEPAGE = "https://www.genivi.org/"
SECTION = "console/utils"
LICENSE = "MPLv2"
LIC_FILES_CHKSUM = "file://LICENSE;md5=8184208060df880fe3137b93eb88aeea"

DEPENDS = "dbus zlib"

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207" SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https" S = "${WORKDIR}/git"

## inherit gzipnative autotools gettext cmake systemd inherit autotools gettext cmake systemd

PACKAGES += "${PN}-systemd"
SYSTEMD_PACKAGES = "${PN} ${PN}-systemd" SYSTEMD_SERVICE_${PN} = "dlt-system.service dlt.service" SYSTEMD_AUTO_ENABLE_${PN} = "enable"

SYSTEMD_SERVICE_${PN}-systemd = "dlt-example-user.service \
    dlt-dbus.service \
    dlt-adaptor-udp.service \
    dlt-receive.service"

SYSTEMD_AUTO_ENABLE_${PN}-systemd = "disable"

EXTRA_OECMAKE = "-DWITH_SYSTEMD=ON"

FILES_${PN}-doc += "/usr/share/dlt-filetransfer"

do_install_append() {
   rm -f ${D}${bindir}/dlt-test-*
}

It did indeed downloaded (CLI follows below as proof), but failed to configure (understandable, gzipnative does not exist in reference poky):

[user@localhost 2.15.0-r0]$ pwd /home/user/YOCTO/oe_core_embedded/poky/build/tmp/work/core2-64-poky-linux/dlt-daemon/2.15.0-r0 [user@localhost 2.15.0-r0]$ cd git
[user@localhost git]$ ls -al
total 148
drwxr-xr-x. 12 user user 4096 Dec 26 09:00 .
drwxrwxr-x. 11 user user 4096 Dec 26 09:04 ..

(quoted diff) +0 -4
-rw-r--r--.  1 user user   555 Dec 26 09:00 AUTHORS
-rw-r--r--.  1 user user   209 Dec 26 09:00 automotive-dlt-c++.pc.in
-rw-r--r--.  1 user user   789 Dec 26 09:00 automotive-dlt.pc.in
-rw-r--r--.  1 user user  3694 Dec 26 09:00 automotive-dlt.spec.in

drwxr-xr-x. 2 user user 4096 Dec 26 09:00 cmake

(quoted diff) +0 -3
-rw-r--r--.  1 user user 10616 Dec 26 09:00 CMakeLists.txt
-rw-r--r--.  1 user user   460 Dec 26 09:00 COPYING
-rw-r--r--.  1 user user   426 Dec 26 09:00 distfiles
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 doc
drwxr-xr-x.  6 user user  4096 Dec 26 09:00 examples
drwxr-xr-x.  8 user user  4096 Dec 26 09:00 .git
-rw-r--r--.  1 user user   127 Dec 26 09:00 .gitignore

drwxr-xr-x. 16 user user 4096 Dec 26 09:00 gtest-1.7.0 drwxr-xr-x. 3 user user 4096 Dec 26 09:00 include

(quoted diff) +0 -4
-rw-r--r--.  1 user user  7441 Dec 26 09:00 INSTALL
-rw-r--r--.  3 user user 16726 Dec 26 09:00 LICENSE
-rw-r--r--.  1 user user  2629 Dec 26 09:00 README
-rw-r--r--.  1 user user 27180 Dec 26 09:00 ReleaseNotes.txt
drwxr-xr-x. 15 user user  4096 Dec 26 09:00 src
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 systemd
drwxr-xr-x.  3 user user  4096 Dec 26 09:00 tests
drwxr-xr-x.  4 user user  4096 Dec 26 09:00 testscripts

[user@localhost git]$

The download problem become visible with the original master recipe:

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

SRC_URI = "git://github.com/GENIVI/${BPN}.git;protocol=https \
    file://0002-Don-t-execute-processes-as-a-specific-user.patch \
    file://0004-Modify-systemd-config-directory.patch \
    "

S = "${WORKDIR}/git"

Patch 0002 did not download. The same as you had for the original URI, but, in my case, it was just a 0002. ... .patch.

Hope this helps.

Zoran

Quoted 116 lines · Yong

Hello all,

When i build the project based on yocto 2.0.2 using bitbake tool, i encountered one fetch error :

"Failed to fetch URL git://github.com/GENIVI/dlt-daemon.git;protocol=https,
attempting MIRRORS if available"

Inside the bb file, there are following descriptions for this URL:

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https" SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

Then i tried to fetch it manually as below, source code can be downloaded successfully and commit id is also correct.
myproject$git clone git://github.com/GENIVI/dlt-daemon.git

myproject/dlt-daemon$ git -c core.fsyncobjectfiles=0 branch --contains e9a486a08fff6d3cc7133a350cec3ee10f463207
* master

I have no idea why such issue occurred for this URL when i use bitbake for build.

Thanks for help.

Following is the detail error log:

NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_compile: Succeeded
NOTE: Running task 687 of 5699 (ID: 5344, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_install)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_install: Succeeded
NOTE: Running task 688 of 5699 (ID: 5345, virtual:native:/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-gnome/gnome/gnome-common_3.14.0.bb, do_populate_sysroot)
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
Started
NOTE: recipe gnome-common-native-3.14.0-r0: task do_populate_sysroot:
Succeeded
NOTE: Running task 689 of 5699 (ID: 569, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch)
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Started
WARNING: Failed to fetch URL
git://github.com/GENIVI/dlt-daemon.git;protocol=https, attempting MIRRORS if
available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/git2/github.com.GENIVI.dlt-daemon.git'...
fatal: Unable to find remote helper for 'https'

ERROR: Function failed: Fetcher failure for URL:
'git://github.com/GENIVI/dlt-daemon.git;protocol=https'. Unable to fetch URL
from any source.
ERROR: Logfile of failure stored in:
/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/tmp/work/corei7-64-poky-linux/dlt-daemon/2.15.0-r0/temp/log.do_fetch.14762
NOTE: recipe dlt-daemon-2.15.0-r0: task do_fetch: Failed
ERROR: Task 569 (/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/../meta-ias-ivi-adapt/recipes-extended/dlt-daemon/dlt-daemon_2.15.0.bb, do_fetch) failed with exit code '1'
NOTE: Running task 690 of 5699 (ID: 3025, /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/poky/meta/recipes-devtools/cmake/cmake-native_3.3.1.bb, do_fetch)
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Started
NOTE: recipe cmake-native-3.3.1-r0: task do_fetch: Succeeded
WARNING: Checksum failure encountered with download of
http://www.w3.org/XML/Test/xmlts20080827.tar.gz;name=testtar - will attempt
other sources if available
WARNING: Renaming
/home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz
to /home/yong/MEL/android/Oreo/2017ww45/VM0/Xen_GVTG_EC1746_RC1-DOM0/build/downloads/xmlts20080827.tar.gz_bad-checksum_3a944b972f2da90b97d8a57c6f939fa8
NOTE: recipe libxml2-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe libxml2-native-2.9.2-r0: task do_fetch: Succeeded
NOTE: recipe glibc-initial-2.22-r0: task do_fetch: Succeeded
NOTE: recipe glibc-2.22-r0: task do_fetch: Succeeded
NOTE: recipe cairo-1.14.2-r1: task do_fetch: Succeeded
NOTE: recipe binutils-cross-x86_64-2.25.1-r0: task do_fetch: Succeeded
NOTE: Sending SIGTERM to remaining 1 tasks

SRC_URI = "git://github.com/GENIVI/dlt-daemon.git;protocol=https \
           file://0004-Modify-systemd-config-directory.patch \
file://0005-Rework-of-initialization-cleanup-of-user-library.patch \
           file://0006-Fix-buffer-overflow-in-dlt_message_payload.patch \
file://0007-Fix-segfault-when-calling-DLT_LOG-on-an-uninitialize.patch \
           file://0008-Header-and-payload-logging-fixed.patch \
           file://0009-Enabled-mutex-priority-inheritance.patch \
           file://0010-Fix-SEGFAULT-in-write_-utf8_-string.patch \
           file://10-tmp-dlt.conf \
           "

SRCREV = "e9a486a08fff6d3cc7133a350cec3ee10f463207"

regards

Yong

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto