Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Subsystems (3)
PATCH v2 1/1 Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_DV_CLKMODE
CONFIG_SYS_DA850_PLL0_POSTDIV
CONFIG_SYS_DA850_PLL0_PLLDIV1
CONFIG_SYS_DA850_PLL0_PLLDIV2
CONFIG_SYS_DA850_PLL0_PLLDIV3
CONFIG_SYS_DA850_PLL0_PLLDIV4
CONFIG_SYS_DA850_PLL0_PLLDIV5
CONFIG_SYS_DA850_PLL0_PLLDIV7
CONFIG_SYS_DA850_PLL1_POSTDIV
CONFIG_SYS_DA850_PLL1_PLLDIV1
CONFIG_SYS_DA850_PLL1_PLLDIV2
CONFIG_SYS_DA850_PLL1_PLLDIV3
---
Changes in V2:
Expand Kconfig help definitions to give a small explanation of options
V1:
This patch is a continuation of Convert CONFIG_SOC_DA8XX et al This also showed warnings when used with the legoev3_defconfig, however it seems like the ev3 board was defining things in the header it didn't need since it doesn't seem to be building da850_lowlevel.c. I don't have the hardware to test that board.
arch/arm/mach-davinci/Kconfig | 85 ++++++++++++++++++++++++++++++++++++++++- configs/omapl138_lcdk_defconfig | 1 + include/configs/calimain.h | 13 ------- include/configs/da850evm.h | 13 ------- include/configs/ipam390.h | 13 ------- include/configs/legoev3.h | 13 ------- include/configs/omapl138_lcdk.h | 13 ------- scripts/config_whitelist.txt | 12 ------ 8 files changed, 85 insertions(+), 78 deletions(-)
arch/arm/mach-davinci/Kconfig +84 -1
@@ -24,7 +24,7 @@ config TARGET_EA20 config TARGET_OMAPL138_LCDK bool "OMAPL138 LCDK" - select SOC_DA8XX + select SOC_DA850 select SUPPORT_SPL config TARGET_CALIMAIN
@@ -63,6 +63,89 @@ config SOC_DA8XX config MACH_DAVINCI_DA850_EVM bool +if SYS_DA850_PLL_INIT +comment "DA850 PLL Initialization Parameters" + +config SYS_DV_CLKMODE + int "SYS_DV_CLKMODE" + default 0 if SOC_DA850 + help + Set PLLCTL Clock Mode bit as External Clock or On Chip oscillator + +config SYS_DA850_PLL0_POSTDIV + int "SYS_DA850_PLL0_POSTDIV" + default 1 if SOC_DA850 + help + Value written to PLL1, POSTDIV register + +config SYS_DA850_PLL0_PLLDIV1 + hex "SYS_DA850_PLL0_PLLDIV1" + default 0x8000 if SOC_DA850 + help + Value written to PLL0, PLLDIV1 register + +config SYS_DA850_PLL0_PLLDIV2 + hex "SYS_DA850_PLL0_PLLDIV2" + default 0x8001 if SOC_DA850 + help + Value written to PLL0, PLLDIV2 register + +config SYS_DA850_PLL0_PLLDIV3 + hex "SYS_DA850_PLL0_PLLDIV3" + default 0x8002 if SOC_DA850 + help + Value written to PLL0, PLLDIV3 register + +config SYS_DA850_PLL0_PLLDIV4 + hex "SYS_DA850_PLL0_PLLDIV4" + default 0x8003 if SOC_DA850 + help + Value written to PLL0, PLLDIV4 register + +config SYS_DA850_PLL0_PLLDIV5 + hex "SYS_DA850_PLL0_PLLDIV5" + default 0x8002 if SOC_DA850 + help + Value written to PLL0, PLLDIV5 register + +config SYS_DA850_PLL0_PLLDIV7 + hex "SYS_DA850_PLL0_PLLDIV7" + default 0x8005 if SOC_DA850 + help + Value written to PLL0, PLLDIV7 register + +config SYS_DA850_PLL1_POSTDIV + hex "SYS_DA850_PLL1_POSTDIV" + default 1 if SOC_DA850 + help + Value written to PLL1, POSTDIV register + +config SYS_DA850_PLL1_PLLDIV1 + hex "SYS_DA850_PLL1_PLLDIV1" + default 0x8000 if SOC_DA850 + help + Value written to PLL1, DIV1 register + +config SYS_DA850_PLL1_PLLDIV2 + hex "SYS_DA850_PLL1_PLLDIV2" + default 0x8001 if SOC_DA850 + help + Value written to PLL1, DIV2 register + +config SYS_DA850_PLL1_PLLDIV3 + hex "SYS_DA850_PLL1_PLLDIV3" + default 0x8002 if SOC_DA850 + help + Value written to PLL1, DIV3 register + +config SYS_DA850_PLL1_PLLM + int "SYS_DA850_PLL1_PLLM" + default 21 if SOC_DA850 + help + Value written to PLL1 multiplier + +endif + source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" source "board/davinci/ea20/Kconfig"
configs/omapl138_lcdk_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_OMAPL138_LCDK=y +CONFIG_SYS_DA850_PLL1_PLLDIV3=0x8003 CONFIG_TI_COMMON_CMD_OPTIONS=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y
include/configs/calimain.h +0 -13
@@ -39,20 +39,7 @@/* * PLL configuration */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002#define CONFIG_SYS_DA850_PLL0_PLLM \ ((calimain_get_osc_freq() == 25000000) ? 23 : 24)
include/configs/da850evm.h +0 -13
@@ -74,20 +74,7 @@/* * PLL configuration */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002#define CONFIG_SYS_DA850_PLL0_PLLM 24#define CONFIG_SYS_DA850_PLL1_PLLM 21
include/configs/ipam390.h +0 -13
@@ -56,20 +56,7 @@/* * PLL configuration */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002#define CONFIG_SYS_DA850_PLL0_PLLM 24#define CONFIG_SYS_DA850_PLL1_PLLM 24
include/configs/legoev3.h +0 -13
@@ -52,20 +52,7 @@/* * PLL configuration */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002#define CONFIG_SYS_DA850_PLL0_PLLM 24#define CONFIG_SYS_DA850_PLL1_PLLM 21
include/configs/omapl138_lcdk.h +0 -13
@@ -58,20 +58,7 @@/* * PLL configuration */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8003#define CONFIG_SYS_DA850_PLL0_PLLM 37#define CONFIG_SYS_DA850_PLL1_PLLM 21
scripts/config_whitelist.txt +0 -12
@@ -2478,21 +2478,10 @@ CONFIG_SYS_DA850_DDR2_SDBCR2 CONFIG_SYS_DA850_DDR2_SDRCR CONFIG_SYS_DA850_DDR2_SDTIMR CONFIG_SYS_DA850_DDR2_SDTIMR2 -CONFIG_SYS_DA850_PLL0_PLLDIV1 -CONFIG_SYS_DA850_PLL0_PLLDIV2 -CONFIG_SYS_DA850_PLL0_PLLDIV3 -CONFIG_SYS_DA850_PLL0_PLLDIV4 -CONFIG_SYS_DA850_PLL0_PLLDIV5 CONFIG_SYS_DA850_PLL0_PLLDIV6 -CONFIG_SYS_DA850_PLL0_PLLDIV7 CONFIG_SYS_DA850_PLL0_PLLM -CONFIG_SYS_DA850_PLL0_POSTDIV CONFIG_SYS_DA850_PLL0_PREDIV -CONFIG_SYS_DA850_PLL1_PLLDIV1 -CONFIG_SYS_DA850_PLL1_PLLDIV2 -CONFIG_SYS_DA850_PLL1_PLLDIV3 CONFIG_SYS_DA850_PLL1_PLLM -CONFIG_SYS_DA850_PLL1_POSTDIV CONFIG_SYS_DA850_SYSCFG_SUSPSRC CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT CONFIG_SYS_DAVINCI_I2C_SLAVE
@@ -2735,7 +2724,6 @@ CONFIG_SYS_DSPI_CTAR4 CONFIG_SYS_DSPI_CTAR5 CONFIG_SYS_DSPI_CTAR6 CONFIG_SYS_DSPI_CTAR7 -CONFIG_SYS_DV_CLKMODE CONFIG_SYS_DV_NOR_BOOT_CFG CONFIG_SYS_EBI_CFGR_VAL CONFIG_SYS_EBI_CSA_VAL
Signature · 1 line
2.7.4
PATCH v2 1/1 Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Quoted 56 lines · Adam Ford
This converts the following to
Kconfig:CONFIG_SYS_DV_CLKMODE CONFIG_SYS_DA850_PLL0_POSTDIV CONFIG_SYS_DA850_PLL0_PLLDIV1 CONFIG_SYS_DA850_PLL0_PLLDIV2 CONFIG_SYS_DA850_PLL0_PLLDIV3 CONFIG_SYS_DA850_PLL0_PLLDIV4 CONFIG_SYS_DA850_PLL0_PLLDIV5 CONFIG_SYS_DA850_PLL0_PLLDIV7 CONFIG_SYS_DA850_PLL1_POSTDIV CONFIG_SYS_DA850_PLL1_PLLDIV1 CONFIG_SYS_DA850_PLL1_PLLDIV2 CONFIG_SYS_DA850_PLL1_PLLDIV3Signed-off-by Adam Ford <[email protected]>---
Changes in V2:
ExpandKconfighelp definitions to give a small explanation of options
V1:
This patch is a continuation of ConvertCONFIG_SOC_DA8XXet al This also showed warnings when used with thelegoev3_defconfig, however it seems like the ev3 board was defining things in the header it didn't need since it doesn't seem to be buildingda850_lowlevel.c. I don't have the hardware to test that board.arch/arm/mach-davinci/Kconfig | 85 ++++++++++++++++++++++++++++++++++++++++- configs/omapl138_lcdk_defconfig | 1 + include/configs/calimain.h | 13 ------- include/configs/da850evm.h | 13 ------- include/configs/ipam390.h | 13 ------- include/configs/legoev3.h | 13 ------- include/configs/omapl138_lcdk.h | 13 ------- scripts/config_whitelist.txt | 12 ------ 8 files changed, 85 insertions(+), 78 deletions(-)arch/arm/mach-davinci/Kconfig +5
-1@@ -24,7 +24,7 @@ config TARGET_EA20 config TARGET_OMAPL138_LCDK bool "OMAPL138 LCDK" - select SOC_DA8XX + select SOC_DA850 select SUPPORT_SPL config TARGET_CALIMAIN@@ -63,6 +63,89 @@ config SOC_DA8XX config MACH_DAVINCI_DA850_EVM bool +if SYS_DA850_PLL_INIT +comment "DA850 PLL Initialization Parameters" + +config SYS_DV_CLKMODE
arch/arm/mach-davinci/Kconfig config SOC_DA8XX · line 79
Quoted 10 lines
arch/arm/mach-davinci/Kconfig +10
-0+ int "SYS_DV_CLKMODE" + default 0 if SOC_DA850 + help + Set PLLCTL Clock Mode bit as External Clock or On Chip oscillator + +config SYS_DA850_PLL0_POSTDIV + int "SYS_DA850_PLL0_POSTDIV" + default 1 if SOC_DA850 + help + Value written to PLL1, POSTDIV register
help does not match config - PLL1 vs. PLL0.
Quoted 38 lines
arch/arm/mach-davinci/Kconfig +38
-0+ +config SYS_DA850_PLL0_PLLDIV1 + hex "SYS_DA850_PLL0_PLLDIV1" + default 0x8000 if SOC_DA850 + help + Value written to PLL0, PLLDIV1 register + +config SYS_DA850_PLL0_PLLDIV2 + hex "SYS_DA850_PLL0_PLLDIV2" + default 0x8001 if SOC_DA850 + help + Value written to PLL0, PLLDIV2 register + +config SYS_DA850_PLL0_PLLDIV3 + hex "SYS_DA850_PLL0_PLLDIV3" + default 0x8002 if SOC_DA850 + help + Value written to PLL0, PLLDIV3 register + +config SYS_DA850_PLL0_PLLDIV4 + hex "SYS_DA850_PLL0_PLLDIV4" + default 0x8003 if SOC_DA850 + help + Value written to PLL0, PLLDIV4 register + +config SYS_DA850_PLL0_PLLDIV5 + hex "SYS_DA850_PLL0_PLLDIV5" + default 0x8002 if SOC_DA850 + help + Value written to PLL0, PLLDIV5 register + +config SYS_DA850_PLL0_PLLDIV7 + hex "SYS_DA850_PLL0_PLLDIV7" + default 0x8005 if SOC_DA850 + help + Value written to PLL0, PLLDIV7 register + +config SYS_DA850_PLL1_POSTDIV
arch/arm/mach-davinci/Kconfig config SOC_DA8XX · line 127
Quoted 10 lines
arch/arm/mach-davinci/Kconfig +10
-0+ hex "SYS_DA850_PLL1_POSTDIV" + default 1 if SOC_DA850 + help + Value written to PLL1, POSTDIV register + +config SYS_DA850_PLL1_PLLDIV1 + hex "SYS_DA850_PLL1_PLLDIV1" + default 0x8000 if SOC_DA850 + help + Value written to PLL1, DIV1 register
In the TRM's (at least in AM1808/OMAP-L138) this register is "PLLDIV1", not just "DIV1".
Quoted 42 lines
arch/arm/mach-davinci/Kconfig +21
-0+ +config SYS_DA850_PLL1_PLLDIV2 + hex "SYS_DA850_PLL1_PLLDIV2" + default 0x8001 if SOC_DA850 + help + Value written to PLL1, DIV2 register + +config SYS_DA850_PLL1_PLLDIV3 + hex "SYS_DA850_PLL1_PLLDIV3" + default 0x8002 if SOC_DA850 + help + Value written to PLL1, DIV3 register + +config SYS_DA850_PLL1_PLLM + int "SYS_DA850_PLL1_PLLM" + default 21 if SOC_DA850 + help + Value written to PLL1 multiplier + +endif + source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" source "board/davinci/ea20/Kconfig"configs/omapl138_lcdk_defconfig +1
-0@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_OMAPL138_LCDK=y +CONFIG_SYS_DA850_PLL1_PLLDIV3=0x8003 CONFIG_TI_COMMON_CMD_OPTIONS=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=yinclude/configs/calimain.h +0
-0@@ -39,20 +39,7 @@/*
include/configs/calimain.h line 42
Quoted 10 lines
include/configs/calimain.h +0
-7* PLL configuration */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1
I suppose you are not adding CONFIG_SYS_DA850_PLL0_PLLDIV6 to Kconfig because there is not a way to handle this relationship?
I think it would be just fine to move CONFIG_SYS_DA850_PLL0_PLLDIV6 to Kconfig and give it the default value 0x8000. I suspect that this comes from the fact that these clocks are supposed to be "fixed ratio" but there are other clocks that are also "fixed ratio" that are not handled this way already (PLL0_SYSCLK2, PLL0_SYSCLK4).
Quoted 7 lines
include/configs/calimain.h +0
-6-#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002