Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Subsystems (3)
PATCH v4 1/1 Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_DV_CLKMODE
CONFIG_SYS_DA850_PLL0_POSTDIV
CONFIG_SYS_DA850_PLL0_PLLDIV1
CONFIG_SYS_DA850_PLL0_PLLDIV2
CONFIG_SYS_DA850_PLL0_PLLDIV3
CONFIG_SYS_DA850_PLL0_PLLDIV4
CONFIG_SYS_DA850_PLL0_PLLDIV5
CONFIG_SYS_DA850_PLL0_PLLDIV6
CONFIG_SYS_DA850_PLL0_PLLDIV7
CONFIG_SYS_DA850_PLL1_POSTDIV
CONFIG_SYS_DA850_PLL1_PLLDIV1
CONFIG_SYS_DA850_PLL1_PLLDIV2
CONFIG_SYS_DA850_PLL1_PLLDIV3
---
V4: Added CONFIG_SYS_DA850_PLL0_PLLDIV6 and removed CONFIG_SYS_DA850_PLL1_PLLM V3:
Using the L138 Technical Reference manual, I changed the names to match
the descriptions of the registers as listed in Table 8-2 and 8-3 of the PLL Control 0 and PLL Control 1 Registers.
V2:
Expand Kconfig help definitions to give a small explanation of options
V1:
This patch is a continuation of Convert CONFIG_SOC_DA8XX et al
This also showed warnings when used with the legoev3_defconfig, however it seems like the ev3 board was defining things in the header it didn't need since it doesn't seem to be building da850_lowlevel.c. I don't have the hardware to test that board.
arch/arm/mach-davinci/Kconfig | 85 ++++++++++++++++++++++++++++++++++++++++- configs/omapl138_lcdk_defconfig | 1 + include/configs/calimain.h | 14 ------- include/configs/da850evm.h | 14 ------- include/configs/ipam390.h | 14 ------- include/configs/legoev3.h | 14 ------- include/configs/omapl138_lcdk.h | 14 ------- scripts/config_whitelist.txt | 13 ------- 8 files changed, 85 insertions(+), 84 deletions(-)
arch/arm/mach-davinci/Kconfig +84 -1
@@ -24,7 +24,7 @@ config TARGET_EA20 config TARGET_OMAPL138_LCDK bool "OMAPL138 LCDK" - select SOC_DA8XX + select SOC_DA850 select SUPPORT_SPL config TARGET_CALIMAIN
@@ -63,6 +63,89 @@ config SOC_DA8XX config MACH_DAVINCI_DA850_EVM bool +if SYS_DA850_PLL_INIT +comment "DA850 PLL Initialization Parameters" + +config SYS_DV_CLKMODE + int "PLLCTL Clock Mode" + default 0 if SOC_DA850 + help + Set PLLCTL Clock Mode bit as External Clock or On Chip oscillator + +config SYS_DA850_PLL0_POSTDIV + int "PLLC0 PLL Post-Divider" + default 1 if SOC_DA850 + help + Value written to PLLC0 PLL Post-Divider Control Register + +config SYS_DA850_PLL0_PLLDIV1 + hex "PLLC0 Divider 1" + default 0x8000 if SOC_DA850 + help + Value written to PLLC0 Divider 1 register + +config SYS_DA850_PLL0_PLLDIV2 + hex "PLLC0 Divider 2" + default 0x8001 if SOC_DA850 + help + Value written to PLLC0 Divider 2 register + +config SYS_DA850_PLL0_PLLDIV3 + hex "PLLC0 Divider 3" + default 0x8002 if SOC_DA850 + help + Value written to PLLC0 Divider 3 register + +config SYS_DA850_PLL0_PLLDIV4 + hex "PLLC0 Divider 4" + default 0x8003 if SOC_DA850 + help + Value written to PLLC0 Divider 4 register + +config SYS_DA850_PLL0_PLLDIV5 + hex "PLLC0 Divider 5" + default 0x8002 if SOC_DA850 + help + Value written to PLLC0 Divider 5 register + +config SYS_DA850_PLL0_PLLDIV6 + hex "PLLC0 Divider 6" + default 0x8000 if SOC_DA850 + help + Value written to PLLC0 Divider 6 register + +config SYS_DA850_PLL0_PLLDIV7 + hex "PLLC0 Divider 7" + default 0x8005 if SOC_DA850 + help + Value written to PLLC0 Divider 7 register + +config SYS_DA850_PLL1_POSTDIV + hex "PLLC1 PLL Post-Divider" + default 1 if SOC_DA850 + help + Value written to PLLC1 PLL Post-Divider Control Register + +config SYS_DA850_PLL1_PLLDIV1 + hex "PLLC1 Divider 2" + default 0x8000 if SOC_DA850 + help + Value written to PLLC1 Divider 1 register + +config SYS_DA850_PLL1_PLLDIV2 + hex "PLLC1 Divider 2" + default 0x8001 if SOC_DA850 + help + Value written to PLLC1 Divider 2 register + +config SYS_DA850_PLL1_PLLDIV3 + hex "PLLC1 Divider 3" + default 0x8002 if SOC_DA850 + help + Value written to PLLC1 Divider 3 register + +endif + source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" source "board/davinci/ea20/Kconfig"
configs/omapl138_lcdk_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_OMAPL138_LCDK=y +CONFIG_SYS_DA850_PLL1_PLLDIV3=0x8003 CONFIG_TI_COMMON_CMD_OPTIONS=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y
include/configs/calimain.h +0 -14
@@ -39,20 +39,6 @@/* * PLL configuration */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002#define CONFIG_SYS_DA850_PLL0_PLLM \ ((calimain_get_osc_freq() == 25000000) ? 23 : 24)
include/configs/da850evm.h +0 -14
@@ -74,20 +74,6 @@/* * PLL configuration */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002#define CONFIG_SYS_DA850_PLL0_PLLM 24#define CONFIG_SYS_DA850_PLL1_PLLM 21
include/configs/ipam390.h +0 -14
@@ -56,20 +56,6 @@/* * PLL configuration */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002#define CONFIG_SYS_DA850_PLL0_PLLM 24#define CONFIG_SYS_DA850_PLL1_PLLM 24
include/configs/legoev3.h +0 -14
@@ -52,20 +52,6 @@/* * PLL configuration */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002#define CONFIG_SYS_DA850_PLL0_PLLM 24#define CONFIG_SYS_DA850_PLL1_PLLM 21
include/configs/omapl138_lcdk.h +0 -14
@@ -58,20 +58,6 @@/* * PLL configuration */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8003#define CONFIG_SYS_DA850_PLL0_PLLM 37#define CONFIG_SYS_DA850_PLL1_PLLM 21
scripts/config_whitelist.txt +0 -13
@@ -2453,21 +2453,9 @@ CONFIG_SYS_DA850_DDR2_SDBCR2 CONFIG_SYS_DA850_DDR2_SDRCR CONFIG_SYS_DA850_DDR2_SDTIMR CONFIG_SYS_DA850_DDR2_SDTIMR2 -CONFIG_SYS_DA850_PLL0_PLLDIV1 -CONFIG_SYS_DA850_PLL0_PLLDIV2 -CONFIG_SYS_DA850_PLL0_PLLDIV3 -CONFIG_SYS_DA850_PLL0_PLLDIV4 -CONFIG_SYS_DA850_PLL0_PLLDIV5 -CONFIG_SYS_DA850_PLL0_PLLDIV6 -CONFIG_SYS_DA850_PLL0_PLLDIV7 CONFIG_SYS_DA850_PLL0_PLLM -CONFIG_SYS_DA850_PLL0_POSTDIV CONFIG_SYS_DA850_PLL0_PREDIV -CONFIG_SYS_DA850_PLL1_PLLDIV1 -CONFIG_SYS_DA850_PLL1_PLLDIV2 -CONFIG_SYS_DA850_PLL1_PLLDIV3 CONFIG_SYS_DA850_PLL1_PLLM -CONFIG_SYS_DA850_PLL1_POSTDIV CONFIG_SYS_DA850_SYSCFG_SUSPSRC CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT CONFIG_SYS_DAVINCI_I2C_SLAVE
@@ -2710,7 +2698,6 @@ CONFIG_SYS_DSPI_CTAR4 CONFIG_SYS_DSPI_CTAR5 CONFIG_SYS_DSPI_CTAR6 CONFIG_SYS_DSPI_CTAR7 -CONFIG_SYS_DV_CLKMODE CONFIG_SYS_DV_NOR_BOOT_CFG CONFIG_SYS_EBI_CFGR_VAL CONFIG_SYS_EBI_CSA_VAL
Signature · 1 line
2.7.4
PATCH v4 1/1 Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Quoted 15 lines · Adam Ford
This converts the following to
Kconfig:CONFIG_SYS_DV_CLKMODE CONFIG_SYS_DA850_PLL0_POSTDIV CONFIG_SYS_DA850_PLL0_PLLDIV1 CONFIG_SYS_DA850_PLL0_PLLDIV2 CONFIG_SYS_DA850_PLL0_PLLDIV3 CONFIG_SYS_DA850_PLL0_PLLDIV4 CONFIG_SYS_DA850_PLL0_PLLDIV5 CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV7 CONFIG_SYS_DA850_PLL1_POSTDIV CONFIG_SYS_DA850_PLL1_PLLDIV1 CONFIG_SYS_DA850_PLL1_PLLDIV2 CONFIG_SYS_DA850_PLL1_PLLDIV3
Quoted 1 line
Signed-off-by Adam Ford <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180130/e6b230b3/attachment.sig>