Documentation: networking: Update ixgb kconfig select documentation
Subsystems (2)
PATCH 1/1 Documentation: networking: Update ixgb kconfig select documentation
Update documentation on how to enable ixgb and ixgb DCB. Simply remove NETDEV_10000 and replace it with the new used kconfig names.
--- Documentation/networking/ixgb.txt | 3 ++- Documentation/networking/ixgbe.txt | 7 ++++--- 2 files changed, 6 insertions(+), 4 deletions(-)
Documentation/networking/ixgb.txt +2 -1
@@ -70,7 +70,8 @@ select m for "Intel(R) PRO/10GbE support" located at: Location: -> Device Drivers -> Network device support (NETDEVICES [=y]) - -> Ethernet (10000 Mbit) (NETDEV_10000 [=y]) + -> Ethernet driver support (ETHERNET [=y]) + -> Intel devices (NET_VENDOR_INTEL [=y]) 1. make modules && make modules_install 2. Load the module:
Documentation/networking/ixgbe.txt +4 -3
@@ -253,9 +253,10 @@ Additional Configurations -> Device Drivers -> Network device support (NETDEVICES [=y]) - -> Ethernet (10000 Mbit) (NETDEV_10000 [=y]) - -> Intel(R) 10GbE PCI Express adapters support - -> Data Center Bridging (DCB) Support + -> Ethernet driver (ETHERNET [=y]) + -> Intel devices (NET_VENDOR_INTEL [=y]) + -> Intel(R) 10GbE PCI Express adapters support (IXGBE [=y]) + -> Data Center Bridging (DCB) Support (IXGBE_DCB [=y]) After these options are selected, you must rebuild your kernel and your modules.
Signature · 1 line
2.13.6
Quoted 2 lines · Corentin Labbe
Update documentation on how to enable ixgb and ixgb DCB. Simply remove
NETDEV_10000and replace it with the new used kconfig names.
Minor typo in the patch description. I assume you mean "ixgb and ixgbe DCB". Also you might want to mention ixgbe somewhere in the patch title.
Quoted 46 lines
Signed-off-by Corentin Labbe <[email protected]>--- Documentation/networking/ixgb.txt | 3 ++- Documentation/networking/ixgbe.txt | 7 ++++--- 2 files changed, 6 insertions(+), 4 deletions(-)Documentation/networking/ixgb.txt +2
-1@@ -70,7 +70,8 @@ select m for "Intel(R) PRO/10GbE support" located at: Location: -> Device Drivers -> Network device support (NETDEVICES [=y]) - -> Ethernet (10000 Mbit) (NETDEV_10000 [=y]) + -> Ethernet driver support (ETHERNET [=y]) + -> Intel devices (NET_VENDOR_INTEL [=y]) 1. make modules && make modules_install 2. Load the module:Documentation/networking/ixgbe.txt +4
-4@@ -253,9 +253,10 @@ Additional Configurations -> Device Drivers -> Network device support (NETDEVICES [=y]) - -> Ethernet (10000 Mbit) (NETDEV_10000 [=y]) - -> Intel(R) 10GbE PCI Express adapters support - -> Data Center Bridging (DCB) Support + -> Ethernet driver (ETHERNET [=y]) + -> Intel devices (NET_VENDOR_INTEL [=y]) + -> Intel(R) 10GbE PCI Express adapters support (IXGBE [=y]) + -> Data Center Bridging (DCB) Support (IXGBE_DCB [=y]) After these options are selected, you must rebuild your kernel and your modules. --2.13.6
_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan at osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
Quoted 17 lines · Alexander Duyck
Quoted 3 lines · Corentin Labbe
Update documentation on how to enable ixgb and ixgb DCB. Simply remove
NETDEV_10000and replace it with the new used kconfig names.Minor typo in the patch description. I assume you mean "ixgb and ixgbe
DCB". Also you might want to mention ixgbe somewhere in the patch title.Quoted 6 lines
Signed-off-by Corentin Labbe <[email protected]>--- Documentation/networking/ixgb.txt | 3 ++- Documentation/networking/ixgbe.txt | 7 ++++--- 2 files changed, 6 insertions(+), 4 deletions(-)
I alredy have a patch to update the ixgbe kernel documentation, please see the following patch:
http://patchwork.ozlabs.org/patch/870106/
With my updated documentation patch, the ixgbe hunk of your patch no longer applies.