Skip to contentSkip to conversation

Documentation: networking: Update ixgb kconfig select documentation

PATCH In review Corentin Labbe 3 participants 3 messages Feb 6, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Documentation: networking: Update ixgb kconfig select documentation

Update documentation on how to enable ixgb and ixgb DCB. Simply remove NETDEV_10000 and replace it with the new used kconfig names.

---
 Documentation/networking/ixgb.txt  | 3 ++-
 Documentation/networking/ixgbe.txt | 7 ++++---
 2 files changed, 6 insertions(+), 4 deletions(-)
Documentation/networking/ixgb.txt +2 -1
index 09f71d71920a..b10f360c57d4 100644
@@ -70,7 +70,8 @@ select m for "Intel(R) PRO/10GbE support" located at:
       Location:
         -> Device Drivers
           -> Network device support (NETDEVICES [=y])
-            -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
+            -> Ethernet driver support (ETHERNET [=y])
+              -> Intel devices (NET_VENDOR_INTEL [=y])
 1. make modules && make modules_install
 
 2. Load the module:
Documentation/networking/ixgbe.txt +4 -3
index 687835415707..90a3860cca3d 100644
@@ -253,9 +253,10 @@ Additional Configurations
 
         -> Device Drivers
           -> Network device support (NETDEVICES [=y])
-            -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
-              -> Intel(R) 10GbE PCI Express adapters support
-                -> Data Center Bridging (DCB) Support
+            -> Ethernet driver (ETHERNET [=y])
+              -> Intel devices (NET_VENDOR_INTEL [=y])
+                -> Intel(R) 10GbE PCI Express adapters support (IXGBE [=y])
+                  -> Data Center Bridging (DCB) Support (IXGBE_DCB [=y])
 
   After these options are selected, you must rebuild your kernel and your
   modules.
Signature · 1 line
2.13.6
#1 lore raw
Quoted 2 lines · Corentin Labbe

Update documentation on how to enable ixgb and ixgb DCB. Simply remove NETDEV_10000 and replace it with the new used kconfig names.

Minor typo in the patch description. I assume you mean "ixgb and ixgbe DCB". Also you might want to mention ixgbe somewhere in the patch title.

Quoted 46 lines
---
 Documentation/networking/ixgb.txt  | 3 ++-
 Documentation/networking/ixgbe.txt | 7 ++++---
 2 files changed, 6 insertions(+), 4 deletions(-)
Documentation/networking/ixgb.txt +2 -1
index 09f71d71920a..b10f360c57d4 100644
@@ -70,7 +70,8 @@ select m for "Intel(R) PRO/10GbE support" located at:
       Location:
         -> Device Drivers
           -> Network device support (NETDEVICES [=y])
-            -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
+            -> Ethernet driver support (ETHERNET [=y])
+              -> Intel devices (NET_VENDOR_INTEL [=y])
 1. make modules && make modules_install
 
 2. Load the module:
Documentation/networking/ixgbe.txt +4 -4
index 687835415707..90a3860cca3d 100644
@@ -253,9 +253,10 @@ Additional Configurations
 
         -> Device Drivers
           -> Network device support (NETDEVICES [=y])
-            -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
-              -> Intel(R) 10GbE PCI Express adapters support
-                -> Data Center Bridging (DCB) Support
+            -> Ethernet driver (ETHERNET [=y])
+              -> Intel devices (NET_VENDOR_INTEL [=y])
+                -> Intel(R) 10GbE PCI Express adapters support (IXGBE [=y])
+                  -> Data Center Bridging (DCB) Support (IXGBE_DCB [=y])
 
   After these options are selected, you must rebuild your kernel and your
   modules.
--

2.13.6

_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan at osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan

#2 lore raw
Quoted 17 lines · Alexander Duyck
Quoted 3 lines · Corentin Labbe

Update documentation on how to enable ixgb and ixgb DCB. Simply remove NETDEV_10000 and replace it with the new used kconfig names.

Minor typo in the patch description. I assume you mean "ixgb and ixgbe
DCB". Also you might want to mention ixgbe somewhere in the patch title.

Quoted 6 lines
---
  Documentation/networking/ixgb.txt  | 3 ++-
  Documentation/networking/ixgbe.txt | 7 ++++---
  2 files changed, 6 insertions(+), 4 deletions(-)

I alredy have a patch to update the ixgbe kernel documentation, please see the following patch:
http://patchwork.ozlabs.org/patch/870106/

With my updated documentation patch, the ixgbe hunk of your patch no longer applies.