Skip to contentSkip to conversation

Configs: various: remove dead defines

PATCH In review Adam Ford 2 participants 2 messages Mar 4, 2018 – Mar 19, 2018

lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH 1/1 Configs: various: remove dead defines

CONFIG_SERIAL0-5 appears to be nothing by dead defines with no corresponding source. Let's remove this to cleanup the serial configs a bit

include/configs/am3517_crane.h +0 -1
index b97a761..c774075 100644
@@ -59,7 +59,6 @@
  * select serial console configuration
  */
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3	/* UART3 on CRANEBOARD */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
include/configs/cm_t335.h +0 -1
index 641bdb7..8d5775c 100644
@@ -83,7 +83,6 @@
 #define CONFIG_SYS_AUTOLOAD		"no"
 
 /* Serial console configuration */
-#define CONFIG_SERIAL1			1	/* UART0 */
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
include/configs/cm_t35.h +0 -1
index e464e40..51db17a 100644
@@ -63,7 +63,6 @@
  * select serial console configuration
  */
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3	/* UART3 */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
include/configs/cm_t3517.h +0 -1
index a57715e..7c9a84b 100644
@@ -67,7 +67,6 @@
  * select serial console configuration
  */
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3	/* UART3 */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
include/configs/eco5pk.h +0 -2
index 63568ca..7940a1e 100644
@@ -17,10 +17,8 @@
 
 /* Our console port is port3 */
 #undef CONFIG_SYS_NS16550_COM1
-#undef CONFIG_SERIAL1
 
 #define CONFIG_SYS_NS16550_COM3	OMAP34XX_UART3
-#define CONFIG_SERIAL3
 
 #define CONFIG_MACH_TYPE	MACH_TYPE_ECO5_PK
 
include/configs/mcx.h +0 -1
index 045f602..9d81726 100644
@@ -61,7 +61,6 @@
  * select serial console configuration
  */
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3	/* UART3 */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
include/configs/nokia_rx51.h +0 -1
index 3cf78d4..554f5ef 100644
@@ -74,7 +74,6 @@
  * select serial console configuration
  */
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3		/* UART3 on RX-51 */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
include/configs/odroid.h +0 -1
index 2c8ee7a..df65582 100644
@@ -38,7 +38,6 @@
 #include <linux/sizes.h>
 
 /* select serial console configuration */
-#define CONFIG_SERIAL1
 
 /* Console configuration */
 
include/configs/odroid_xu3.h +0 -1
index 9067ba6..b58d93f 100644
@@ -16,7 +16,6 @@
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 
 /* select serial console configuration */
-#define CONFIG_SERIAL2			/* use SERIAL 2 */
 
 #define TZPC_BASE_OFFSET		0x10000
 
include/configs/omap3_cairo.h +0 -2
index 1fa02a5..57ac3ec 100644
@@ -206,8 +206,6 @@
 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_SYS_NS16550_COM3
 #define CONFIG_SYS_NS16550_COM2		OMAP34XX_UART2
-#undef CONFIG_SERIAL3
-#define CONFIG_SERIAL2
 #endif
 
 /* Provide the MACH_TYPE value the vendor kernel requires */
include/configs/omap3_pandora.h +0 -1
index ce4863c..e06c505 100644
@@ -38,7 +38,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3
 
 /* commands to include */
 
include/configs/origen.h +0 -1
index 2719138..0e5a791 100644
@@ -31,7 +31,6 @@
 #define CONFIG_MACH_TYPE		MACH_TYPE_ORIGEN
 
 /* select serial console configuration */
-#define CONFIG_SERIAL2
 
 /* Console configuration */
 #define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
include/configs/peach-pi.h +0 -1
index 10af572..e7edeb6 100644
@@ -25,7 +25,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_IRAM_TOP - 0x800)
 
 /* select serial console configuration */
-#define CONFIG_SERIAL3		/* use SERIAL 3 */
 #define CONFIG_DEFAULT_CONSOLE	"console=ttySAC1,115200n8\0"
 
 /* Display */
include/configs/peach-pit.h +0 -1
index cb5937e..a04f047 100644
@@ -25,7 +25,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_IRAM_TOP - 0x800)
 
 /* select serial console configuration */
-#define CONFIG_SERIAL3		/* use SERIAL 3 */
 #define CONFIG_DEFAULT_CONSOLE	"console=ttySAC1,115200n8\0"
 
 /* DRAM Memory Banks */
include/configs/pengwyn.h +0 -1
index 74bfde7..5b7696a 100644
@@ -11,7 +11,6 @@
 #ifndef __CONFIG_PENGWYN_H
 #define __CONFIG_PENGWYN_H
 
-#define CONFIG_SERIAL1
 
 #include <configs/ti_am335x_common.h>
 
include/configs/pepper.h +0 -1
index 6743fd1..c2360eb 100644
@@ -72,7 +72,6 @@
 	"fi;" \
 
 /* Serial console configuration */
-#define CONFIG_SERIAL1			1
 #define CONFIG_SYS_NS16550_COM1		0x44e09000
 
 /* Ethernet support */
include/configs/s5p_goni.h +0 -1
index 1b40c29..b00a6f2 100644
@@ -40,7 +40,6 @@
 /*
  * select serial console configuration
  */
-#define CONFIG_SERIAL2			1	/* use SERIAL2 */
 
 /* MMC */
 #define SDHCI_MAX_HOSTS		4
include/configs/s5pc210_universal.h +0 -1
index 841dedd..5fef30a 100644
@@ -25,7 +25,6 @@
 #define SDRAM_BANK_SIZE			(256 << 20)	/* 256 MB */
 
 /* select serial console configuration */
-#define CONFIG_SERIAL2
 
 /* Console configuration */
 
include/configs/siemens-am33x-common.h +0 -1
index b23e20a..1843c12 100644
@@ -86,7 +86,6 @@
 #define CONFIG_SYS_NS16550_COM1		0x44e09000
 #define CONFIG_SYS_NS16550_COM4		0x481a6000
 
-#define CONFIG_SERIAL1                  1
 
 /* I2C Configuration */
 #define CONFIG_I2C
include/configs/smdk5420.h +0 -1
index 2727d65..6bece73 100644
@@ -26,7 +26,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_IRAM_TOP - 0x800)
 
 /* select serial console configuration */
-#define CONFIG_SERIAL3		/* use SERIAL 3 */
 #define CONFIG_DEFAULT_CONSOLE	"console=ttySAC1,115200n8\0"
 
 #define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
include/configs/smdkc100.h +0 -1
index 8a0718e..9de5168 100644
@@ -46,7 +46,6 @@
 /*
  * select serial console configuration
  */
-#define CONFIG_SERIAL0			1	/* use SERIAL 0 on SMDKC100 */
 
 /* PWM */
 #define CONFIG_PWM			1
include/configs/smdkv310.h +0 -1
index cce7caf..9cb34e4 100644
@@ -30,7 +30,6 @@
 #define S5P_CHECK_LPA			0xABAD0000
 
 /* select serial console configuration */
-#define CONFIG_SERIAL1			1	/* use SERIAL 1 */
 #define EXYNOS4_DEFAULT_UART_OFFSET	0x010000
 
 /* allow to overwrite serial and ethaddr */
include/configs/tam3517-common.h +0 -1
index 72da301..048b54c 100644
@@ -54,7 +54,6 @@
  * select serial console configuration
  */
 #define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
-#define CONFIG_SERIAL1			/* UART1 */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
include/configs/ti816x_evm.h +0 -3
index e424983..add4ee0 100644
@@ -53,9 +53,6 @@
 /* allow overwriting serial config and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_SERIAL1
-#define CONFIG_SERIAL2
-#define CONFIG_SERIAL3
 
 /*
  * GPMC NAND block.  We support 1 device and the physical address to
include/configs/ti_omap3_common.h +0 -1
index 3439a27..df6bca6 100644
@@ -40,7 +40,6 @@
 /* Select serial console configuration */
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3
 #endif
 
 /* Physical Memory Map */
include/configs/trats.h +0 -1
index e6649ff..77729a1 100644
@@ -34,7 +34,6 @@
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
 
 /* select serial console configuration */
-#define CONFIG_SERIAL2
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_TRATS
 
include/configs/trats2.h +0 -1
index c3eb7c9..c9b192a 100644
@@ -32,7 +32,6 @@
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
 
 /* select serial console configuration */
-#define CONFIG_SERIAL2
 
 /* Console configuration */
 
include/configs/tricorder.h +0 -1
index 87eb9ac..d1a8c94 100644
@@ -50,7 +50,6 @@
 
 /* select serial console configuration */
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
 
scripts/config_whitelist.txt +0 -10
index a42b64d..295681c 100644
@@ -1805,10 +1805,6 @@ CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ
 CONFIG_SECURITY
 CONFIG_SEC_DEQ_TIMEOUT
 CONFIG_SEC_FW_SIZE
-CONFIG_SERIAL0
-CONFIG_SERIAL1
-CONFIG_SERIAL2
-CONFIG_SERIAL3
 CONFIG_SERIAL_BOOT
 CONFIG_SERIAL_FLASH
 CONFIG_SERIAL_HW_FLOW_CONTROL
@@ -4318,12 +4314,6 @@ CONFIG_SYS_SDRC_TR_VAL2
 CONFIG_SYS_SD_VOLTAGE
 CONFIG_SYS_SEC_MON_ADDR
 CONFIG_SYS_SEC_MON_OFFSET
-CONFIG_SYS_SERIAL0
-CONFIG_SYS_SERIAL1
-CONFIG_SYS_SERIAL2
-CONFIG_SYS_SERIAL3
-CONFIG_SYS_SERIAL4
-CONFIG_SYS_SERIAL5
 CONFIG_SYS_SERIAL_BOOT
 CONFIG_SYS_SFP_ADDR
 CONFIG_SYS_SFP_OFFSET
Signature · 1 line
2.7.4
#1 lore raw

include/configs/am3517_crane.h

Quoted 8 lines · Adam Ford

CONFIG_SERIAL0-5 appears to be nothing by dead defines with no corresponding source. Let's remove this to cleanup the serial configs a bit

include/configs/am3517_crane.h +0 -0
index b97a761..c774075 100644

CONFIG_SERIALN is used by PL10x driver still, sorry.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180319/55f5b0a8/attachment.sig>