Configs: various: remove dead defines
PATCH 1/1 Configs: various: remove dead defines
CONFIG_SERIAL0-5 appears to be nothing by dead defines with no corresponding source. Let's remove this to cleanup the serial configs a bit
Signed-off-by Adam Ford <[email protected]>
include/configs/am3517_crane.h +0 -1
@@ -59,7 +59,6 @@* select serial console configuration */ #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3/* UART3 on CRANEBOARD */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE
include/configs/cm_t335.h +0 -1
@@ -83,7 +83,6 @@#define CONFIG_SYS_AUTOLOAD "no"/* Serial console configuration */ -#define CONFIG_SERIAL1 1/* UART0 */ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000/* UART0 */
include/configs/cm_t35.h +0 -1
@@ -63,7 +63,6 @@* select serial console configuration */ #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3/* UART3 */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE
include/configs/cm_t3517.h +0 -1
@@ -67,7 +67,6 @@* select serial console configuration */ #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3/* UART3 */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE
include/configs/eco5pk.h +0 -2
@@ -17,10 +17,8 @@/* Our console port is port3 */ #undef CONFIG_SYS_NS16550_COM1 -#undef CONFIG_SERIAL1#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 #define CONFIG_MACH_TYPE MACH_TYPE_ECO5_PK
include/configs/mcx.h +0 -1
@@ -61,7 +61,6 @@* select serial console configuration */ #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3/* UART3 */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE
include/configs/nokia_rx51.h +0 -1
@@ -74,7 +74,6 @@* select serial console configuration */ #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3/* UART3 on RX-51 */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE
include/configs/odroid.h +0 -1
@@ -38,7 +38,6 @@#include <linux/sizes.h> /* select serial console configuration */ -#define CONFIG_SERIAL1 /* Console configuration */
include/configs/odroid_xu3.h +0 -1
@@ -16,7 +16,6 @@#define CONFIG_SYS_SDRAM_BASE 0x40000000/* select serial console configuration */ -#define CONFIG_SERIAL2 /* use SERIAL 2 */ #define TZPC_BASE_OFFSET 0x10000
include/configs/omap3_cairo.h +0 -2
@@ -206,8 +206,6 @@#ifdef CONFIG_SPL_BUILD #undef CONFIG_SYS_NS16550_COM3#define CONFIG_SYS_NS16550_COM2 OMAP34XX_UART2 -#undef CONFIG_SERIAL3 -#define CONFIG_SERIAL2 #endif /* Provide the MACH_TYPE value the vendor kernel requires */
include/configs/omap3_pandora.h +0 -1
@@ -38,7 +38,6 @@#define CONFIG_SYS_NS16550_REG_SIZE (-4)#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3/* commands to include */
include/configs/origen.h +0 -1
@@ -31,7 +31,6 @@#define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN/* select serial console configuration */ -#define CONFIG_SERIAL2 /* Console configuration */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
include/configs/peach-pi.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800)/* select serial console configuration */ -#define CONFIG_SERIAL3 /* use SERIAL 3 */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"/* Display */
include/configs/peach-pit.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800)/* select serial console configuration */ -#define CONFIG_SERIAL3 /* use SERIAL 3 */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"/* DRAM Memory Banks */
include/configs/pengwyn.h +0 -1
@@ -11,7 +11,6 @@#ifndef __CONFIG_PENGWYN_H#define __CONFIG_PENGWYN_H -#define CONFIG_SERIAL1 #include <configs/ti_am335x_common.h>
include/configs/pepper.h +0 -1
@@ -72,7 +72,6 @@ "fi;" \/* Serial console configuration */ -#define CONFIG_SERIAL1 1#define CONFIG_SYS_NS16550_COM1 0x44e09000/* Ethernet support */
include/configs/s5p_goni.h +0 -1
@@ -40,7 +40,6 @@/* * select serial console configuration */ -#define CONFIG_SERIAL2 1/* use SERIAL2 */ /* MMC */ #define SDHCI_MAX_HOSTS 4
include/configs/s5pc210_universal.h +0 -1
@@ -25,7 +25,6 @@#define SDRAM_BANK_SIZE (256 << 20)/* 256 MB */ /* select serial console configuration */ -#define CONFIG_SERIAL2 /* Console configuration */
include/configs/siemens-am33x-common.h +0 -1
@@ -86,7 +86,6 @@#define CONFIG_SYS_NS16550_COM1 0x44e09000#define CONFIG_SYS_NS16550_COM4 0x481a6000 -#define CONFIG_SERIAL1 1/* I2C Configuration */ #define CONFIG_I2C
include/configs/smdk5420.h +0 -1
@@ -26,7 +26,6 @@#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800)/* select serial console configuration */ -#define CONFIG_SERIAL3 /* use SERIAL 3 */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
include/configs/smdkc100.h +0 -1
@@ -46,7 +46,6 @@/* * select serial console configuration */ -#define CONFIG_SERIAL0 1/* use SERIAL 0 on SMDKC100 */ /* PWM */ #define CONFIG_PWM 1
include/configs/smdkv310.h +0 -1
@@ -30,7 +30,6 @@#define S5P_CHECK_LPA 0xABAD0000/* select serial console configuration */ -#define CONFIG_SERIAL1 1/* use SERIAL 1 */ #define EXYNOS4_DEFAULT_UART_OFFSET 0x010000/* allow to overwrite serial and ethaddr */
include/configs/tam3517-common.h +0 -1
@@ -54,7 +54,6 @@* select serial console configuration */ #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SERIAL1 /* UART1 */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE
include/configs/ti816x_evm.h +0 -3
@@ -53,9 +53,6 @@/* allow overwriting serial config and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_SERIAL1 -#define CONFIG_SERIAL2 -#define CONFIG_SERIAL3 /* * GPMC NAND block. We support 1 device and the physical address to
include/configs/ti_omap3_common.h +0 -1
@@ -40,7 +40,6 @@/* Select serial console configuration */ #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3#endif /* Physical Memory Map */
include/configs/trats.h +0 -1
@@ -34,7 +34,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)/* select serial console configuration */ -#define CONFIG_SERIAL2 #define CONFIG_MACH_TYPE MACH_TYPE_TRATS
include/configs/trats2.h +0 -1
@@ -32,7 +32,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)/* select serial console configuration */ -#define CONFIG_SERIAL2 /* Console configuration */
include/configs/tricorder.h +0 -1
@@ -50,7 +50,6 @@/* select serial console configuration */ #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200}
scripts/config_whitelist.txt +0 -10
@@ -1805,10 +1805,6 @@ CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ CONFIG_SECURITY CONFIG_SEC_DEQ_TIMEOUT CONFIG_SEC_FW_SIZE -CONFIG_SERIAL0 -CONFIG_SERIAL1 -CONFIG_SERIAL2 -CONFIG_SERIAL3 CONFIG_SERIAL_BOOT CONFIG_SERIAL_FLASH CONFIG_SERIAL_HW_FLOW_CONTROL
@@ -4318,12 +4314,6 @@ CONFIG_SYS_SDRC_TR_VAL2 CONFIG_SYS_SD_VOLTAGE CONFIG_SYS_SEC_MON_ADDR CONFIG_SYS_SEC_MON_OFFSET -CONFIG_SYS_SERIAL0 -CONFIG_SYS_SERIAL1 -CONFIG_SYS_SERIAL2 -CONFIG_SYS_SERIAL3 -CONFIG_SYS_SERIAL4 -CONFIG_SYS_SERIAL5 CONFIG_SYS_SERIAL_BOOT CONFIG_SYS_SFP_ADDR CONFIG_SYS_SFP_OFFSET
Signature · 1 line
2.7.4
include/configs/am3517_crane.h
Quoted 8 lines · Adam Ford
CONFIG_SERIAL0-5 appears to be nothing by dead defines with no corresponding source. Let's remove this to cleanup the serial configs a bit
Signed-off-by Adam Ford <[email protected]>include/configs/am3517_crane.h +0
-0
CONFIG_SERIALN is used by PL10x driver still, sorry.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180319/55f5b0a8/attachment.sig>