Skip to contentSkip to conversation

media: Remove Blackfin media support

PATCH New Aaron Wu 1 participant 26 messages Mar 16, 2018

Subsystems (30)
lore
Share & tools
lore

Aaron Wu

author
#0 lore raw

PATCH 3/28 media: Remove Blackfin media support

Remove Blackfin media support

---
 drivers/media/platform/Kconfig                 |   2 -
 drivers/media/platform/Makefile                |   2 -
 drivers/media/platform/blackfin/Kconfig        |  16 -
 drivers/media/platform/blackfin/Makefile       |   2 -
 drivers/media/platform/blackfin/bfin_capture.c | 989 -------------------------
 drivers/media/platform/blackfin/ppi.c          | 361 ---------
 include/media/blackfin/bfin_capture.h          |  39 -
 include/media/blackfin/ppi.h                   |  94 ---
 8 files changed, 1505 deletions(-)
 delete mode 100644 drivers/media/platform/blackfin/Kconfig
 delete mode 100644 drivers/media/platform/blackfin/Makefile
 delete mode 100644 drivers/media/platform/blackfin/bfin_capture.c
 delete mode 100644 drivers/media/platform/blackfin/ppi.c
 delete mode 100644 include/media/blackfin/bfin_capture.h
 delete mode 100644 include/media/blackfin/ppi.h
drivers/media/platform/Kconfig +0 -2
index 614fbef..00158b3 100644
@@ -31,8 +31,6 @@ source "drivers/media/platform/davinci/Kconfig"
 
 source "drivers/media/platform/omap/Kconfig"
 
-source "drivers/media/platform/blackfin/Kconfig"
-
 config VIDEO_SH_VOU
 	tristate "SuperH VOU video output driver"
 	depends on MEDIA_CAMERA_SUPPORT
drivers/media/platform/Makefile +0 -2
index 7f30804..e2b5cb3 100644
@@ -53,8 +53,6 @@ obj-$(CONFIG_VIDEO_TEGRA_HDMI_CEC)	+= tegra-cec/
 
 obj-y					+= stm32/
 
-obj-y                                   += blackfin/
-
 obj-y					+= davinci/
 
 obj-$(CONFIG_VIDEO_SH_VOU)		+= sh_vou.o
drivers/media/platform/blackfin/Kconfig deleted +0 -16
deleted file mode 100644
index 68fa901..0000000
@@ -1,16 +0,0 @@
-config VIDEO_BLACKFIN_CAPTURE
-	tristate "Blackfin Video Capture Driver"
-	depends on VIDEO_V4L2 && BLACKFIN && I2C
-	depends on HAS_DMA
-	select VIDEOBUF2_DMA_CONTIG
-	help
-	  V4L2 bridge driver for Blackfin video capture device.
-	  Choose PPI or EPPI as its interface.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_capture.
-
-config VIDEO_BLACKFIN_PPI
-	tristate
-	depends on VIDEO_BLACKFIN_CAPTURE
-	default VIDEO_BLACKFIN_CAPTURE
drivers/media/platform/blackfin/Makefile deleted +0 -2
deleted file mode 100644
index 30421bc..0000000
@@ -1,2 +0,0 @@
-obj-$(CONFIG_VIDEO_BLACKFIN_CAPTURE) += bfin_capture.o
-obj-$(CONFIG_VIDEO_BLACKFIN_PPI)     += ppi.o
drivers/media/platform/blackfin/bfin_capture.c deleted +0 -989

989 lines not on this page · raw message

drivers/media/platform/blackfin/ppi.c deleted +0 -361

361 lines not on this page · raw message

include/media/blackfin/bfin_capture.h deleted +0 -39
deleted file mode 100644
index a999a397..0000000
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _BFIN_CAPTURE_H_
-#define _BFIN_CAPTURE_H_
-
-#include <linux/i2c.h>
-
-struct v4l2_input;
-struct ppi_info;
-
-struct bcap_route {
-	u32 input;
-	u32 output;
-	u32 ppi_control;
-};
-
-struct bfin_capture_config {
-	/* card name */
-	char *card_name;
-	/* inputs available at the sub device */
-	struct v4l2_input *inputs;
-	/* number of inputs supported */
-	int num_inputs;
-	/* routing information for each input */
-	struct bcap_route *routes;
-	/* i2c bus adapter no */
-	int i2c_adapter_id;
-	/* i2c subdevice board info */
-	struct i2c_board_info board_info;
-	/* ppi board info */
-	const struct ppi_info *ppi_info;
-	/* ppi control */
-	unsigned long ppi_control;
-	/* ppi interrupt mask */
-	u32 int_mask;
-	/* horizontal blanking pixels */
-	int blank_pixels;
-};
-
-#endif
include/media/blackfin/ppi.h deleted +0 -94

94 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#1 lore raw

PATCH 4/28 tty: Remove Blackfin tty and uart support

Remove Blackfin tty and uart support

---
 drivers/tty/Kconfig                  |   13 -
 drivers/tty/Makefile                 |    1 -
 drivers/tty/bfin_jtag_comm.c         |  353 --------
 drivers/tty/hvc/Kconfig              |    9 -
 drivers/tty/hvc/Makefile             |    1 -
 drivers/tty/hvc/hvc_bfin_jtag.c      |  104 ---
 drivers/tty/serial/Kconfig           |  149 ----
 drivers/tty/serial/Makefile          |    2 -
 drivers/tty/serial/bfin_sport_uart.c |  937 --------------------
 drivers/tty/serial/bfin_sport_uart.h |   86 --
 drivers/tty/serial/bfin_uart.c       | 1551 ----------------------------------
 include/uapi/linux/serial_core.h     |    6 -
 12 files changed, 3212 deletions(-)
 delete mode 100644 drivers/tty/bfin_jtag_comm.c
 delete mode 100644 drivers/tty/hvc/hvc_bfin_jtag.c
 delete mode 100644 drivers/tty/serial/bfin_sport_uart.c
 delete mode 100644 drivers/tty/serial/bfin_sport_uart.h
 delete mode 100644 drivers/tty/serial/bfin_uart.c
drivers/tty/Kconfig +0 -13
index b811442..f298179 100644
@@ -151,19 +151,6 @@ config LEGACY_PTY_COUNT
 	  When not in use, each legacy PTY occupies 12 bytes on 32-bit
 	  architectures and 24 bytes on 64-bit architectures.
 
-config BFIN_JTAG_COMM
-	tristate "Blackfin JTAG Communication"
-	depends on BLACKFIN
-	help
-	  Add support for emulating a TTY device over the Blackfin JTAG.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_jtag_comm.
-
-config BFIN_JTAG_COMM_CONSOLE
-	bool "Console on Blackfin JTAG"
-	depends on BFIN_JTAG_COMM=y
-
 config SERIAL_NONSTANDARD
 	bool "Non-standard serial port support"
 	depends on HAS_IOMEM
drivers/tty/Makefile +0 -1
index 8ce3a86..42054c7 100644
@@ -20,7 +20,6 @@ obj-$(CONFIG_SERIAL_DEV_BUS)	+= serdev/
 
 # tty drivers
 obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
-obj-$(CONFIG_BFIN_JTAG_COMM)	+= bfin_jtag_comm.o
 obj-$(CONFIG_CYCLADES)		+= cyclades.o
 obj-$(CONFIG_ISI)		+= isicom.o
 obj-$(CONFIG_MOXA_INTELLIO)	+= moxa.o
drivers/tty/bfin_jtag_comm.c deleted +0 -353

353 lines not on this page · raw message

drivers/tty/hvc/Kconfig +0 -9
index fec457e..3bade5a 100644
@@ -88,15 +88,6 @@ config HVC_DCC
 	 driver. This console is used through a JTAG only on ARM. If you don't have
 	 a JTAG then you probably don't want this option.
 
-config HVC_BFIN_JTAG
-	bool "Blackfin JTAG console"
-	depends on BLACKFIN
-	select HVC_DRIVER
-	help
-	 This console uses the Blackfin JTAG to create a console under the
-	 the HVC driver.  If you don't have JTAG, then you probably don't
-	 want this option.
-
 config HVCS
 	tristate "IBM Hypervisor Virtual Console Server support"
 	depends on PPC_PSERIES && HVC_CONSOLE
drivers/tty/hvc/Makefile +0 -1
index 0b02ec7..b82f9f6 100644
@@ -10,5 +10,4 @@ obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o
 obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
 obj-$(CONFIG_HVC_IUCV)		+= hvc_iucv.o
 obj-$(CONFIG_HVC_UDBG)		+= hvc_udbg.o
-obj-$(CONFIG_HVC_BFIN_JTAG)	+= hvc_bfin_jtag.o
 obj-$(CONFIG_HVCS)		+= hvcs.o
drivers/tty/hvc/hvc_bfin_jtag.c deleted +0 -104

104 lines not on this page · raw message

drivers/tty/serial/Kconfig +0 -149

161 lines not on this page · raw message

drivers/tty/serial/Makefile +0 -2
index 842d185..1342ffc 100644
@@ -29,8 +29,6 @@ obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o
 obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
 obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
-obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o
-obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_MAX310X) += max310x.o
drivers/tty/serial/bfin_sport_uart.c deleted +0 -937

937 lines not on this page · raw message

drivers/tty/serial/bfin_sport_uart.h deleted +0 -86

86 lines not on this page · raw message

drivers/tty/serial/bfin_uart.c deleted +0 -1551

1,305 lines not on this page · raw message

include/uapi/linux/serial_core.h +0 -6
index 1c8413f..82712d0 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.7.4

Part of the diff is not shown here. View the raw message.

author
#2 lore raw

PATCH 5/28 rtc: Remove Blackfin RTC support

In reply to Aaron Wu

Remove Blackfin RTC support

---
 drivers/rtc/Kconfig    |  10 --
 drivers/rtc/Makefile   |   1 -
 drivers/rtc/rtc-bfin.c | 448 -------------------------------------------------
 3 files changed, 459 deletions(-)
 delete mode 100644 drivers/rtc/rtc-bfin.c
drivers/rtc/Kconfig +0 -10
index 8ab5f0a5..622d0ed2 100644
@@ -1434,16 +1434,6 @@ config RTC_DRV_AU1XXX
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-au1xxx.
 
-config RTC_DRV_BFIN
-	tristate "Blackfin On-Chip RTC"
-	depends on BLACKFIN && !BF561
-	help
-	  If you say yes here you will get support for the
-	  Blackfin On-Chip Real Time Clock.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called rtc-bfin.
-
 config RTC_DRV_RS5C313
 	tristate "Ricoh RS5C313"
 	depends on SH_LANDISK
drivers/rtc/Makefile +0 -1
index 4fbf87e4..014c8a8 100644
@@ -36,7 +36,6 @@ obj-$(CONFIG_RTC_DRV_ASM9260)	+= rtc-asm9260.o
 obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
 obj-$(CONFIG_RTC_DRV_AT91SAM9)	+= rtc-at91sam9.o
 obj-$(CONFIG_RTC_DRV_AU1XXX)	+= rtc-au1xxx.o
-obj-$(CONFIG_RTC_DRV_BFIN)	+= rtc-bfin.o
 obj-$(CONFIG_RTC_DRV_BRCMSTB)	+= rtc-brcmstb-waketimer.o
 obj-$(CONFIG_RTC_DRV_BQ32K)	+= rtc-bq32k.o
 obj-$(CONFIG_RTC_DRV_BQ4802)	+= rtc-bq4802.o
drivers/rtc/rtc-bfin.c deleted +0 -448

448 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#3 lore raw

PATCH 6/28 mmc: Remove Blackfin SD host support

In reply to Aaron Wu

Remove Blackfin SD host support

---
 drivers/mmc/host/Kconfig    |  19 --
 drivers/mmc/host/Makefile   |   1 -
 drivers/mmc/host/bfin_sdh.c | 679 --------------------------------------------
 3 files changed, 699 deletions(-)
 delete mode 100644 drivers/mmc/host/bfin_sdh.c
drivers/mmc/host/Kconfig +0 -19
index 620c2d9..b4fd5d4 100644
@@ -646,25 +646,6 @@ config MMC_VIA_SDMMC
 
 	  If unsure, say N.
 
-config SDH_BFIN
-	tristate "Blackfin Secure Digital Host support"
-	depends on (BF54x && !BF544) || (BF51x && !BF512)
-	help
-	  If you say yes here you will get support for the Blackfin on-chip
-	  Secure Digital Host interface.  This includes support for MMC and
-	  SD cards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_sdh.
-
-	  If unsure, say N.
-
-config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
-	bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround"
-	depends on SDH_BFIN
-	help
-	  If you say yes here SD-Cards may work on the EZkit.
-
 config MMC_CAVIUM_OCTEON
 	tristate "Cavium OCTEON SD/MMC Card Interface support"
 	depends on CAVIUM_OCTEON_SOC
drivers/mmc/host/Makefile +0 -1
index 84cd138..f563cc0 100644
@@ -43,7 +43,6 @@ obj-$(CONFIG_MMC_SDHI_SYS_DMAC)		+= renesas_sdhi_sys_dmac.o
 obj-$(CONFIG_MMC_SDHI_INTERNAL_DMAC)	+= renesas_sdhi_internal_dmac.o
 obj-$(CONFIG_MMC_CB710)		+= cb710-mmc.o
 obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
-obj-$(CONFIG_SDH_BFIN)		+= bfin_sdh.o
 octeon-mmc-objs := cavium.o cavium-octeon.o
 obj-$(CONFIG_MMC_CAVIUM_OCTEON) += octeon-mmc.o
 thunderx-mmc-objs := cavium.o cavium-thunderx.o
drivers/mmc/host/bfin_sdh.c deleted +0 -679

679 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#4 lore raw

PATCH 7/28 watchdog: Remove Blackfin watchdog support

In reply to Aaron Wu

Remove Blackfin watchdog support

---
 drivers/watchdog/Kconfig    |  13 --
 drivers/watchdog/Makefile   |   3 -
 drivers/watchdog/bfin_wdt.c | 476 --------------------------------------------
 3 files changed, 492 deletions(-)
 delete mode 100644 drivers/watchdog/bfin_wdt.c
drivers/watchdog/Kconfig +0 -13
index 37460cd..6174e99 100644
@@ -815,19 +815,6 @@ config SPRD_WATCHDOG
 	  Say Y here to include watchdog timer supported
 	  by Spreadtrum system.
 
-# BLACKFIN Architecture
-
-config BFIN_WDT
-	tristate "Blackfin On-Chip Watchdog Timer"
-	depends on BLACKFIN
-	---help---
-	  If you say yes here you will get support for the Blackfin On-Chip
-	  Watchdog Timer. If you have one of these processors and wish to
-	  have watchdog support enabled, say Y, otherwise say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_wdt.
-
 # CRIS Architecture
 
 # FRV Architecture
drivers/watchdog/Makefile +0 -3
index 0474d38..1971f86 100644
@@ -91,9 +91,6 @@ obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o
 obj-$(CONFIG_RTD119X_WATCHDOG) += rtd119x_wdt.o
 obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
 
-# BLACKFIN Architecture
-obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
-
 # CRIS Architecture
 
 # FRV Architecture
drivers/watchdog/bfin_wdt.c deleted +0 -476

476 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#5 lore raw

PATCH 8/28 Asoc: Remove Blackfin ASOC support

In reply to Aaron Wu

Remove Blackfin ASOC support

---
 sound/soc/Kconfig                       |    1 -
 sound/soc/Makefile                      |    1 -
 sound/soc/blackfin/Kconfig              |  205 ------
 sound/soc/blackfin/Makefile             |   40 --
 sound/soc/blackfin/bf5xx-ac97-pcm.c     |  480 --------------
 sound/soc/blackfin/bf5xx-ac97.c         |  388 -----------
 sound/soc/blackfin/bf5xx-ac97.h         |   57 --
 sound/soc/blackfin/bf5xx-ad1836.c       |  109 ---
 sound/soc/blackfin/bf5xx-ad193x.c       |  131 ----
 sound/soc/blackfin/bf5xx-ad1980.c       |  109 ---
 sound/soc/blackfin/bf5xx-ad73311.c      |  212 ------
 sound/soc/blackfin/bf5xx-i2s-pcm.c      |  373 -----------
 sound/soc/blackfin/bf5xx-i2s-pcm.h      |   17 -
 sound/soc/blackfin/bf5xx-i2s.c          |  391 -----------
 sound/soc/blackfin/bf5xx-sport.c        | 1102 -------------------------------
 sound/soc/blackfin/bf5xx-sport.h        |  174 -----
 sound/soc/blackfin/bf5xx-ssm2602.c      |  126 ----
 sound/soc/blackfin/bf6xx-i2s.c          |  239 -------
 sound/soc/blackfin/bf6xx-sport.c        |  425 ------------
 sound/soc/blackfin/bf6xx-sport.h        |   82 ---
 sound/soc/blackfin/bfin-eval-adau1373.c |  173 -----
 sound/soc/blackfin/bfin-eval-adau1701.c |  113 ----
 sound/soc/blackfin/bfin-eval-adau1x61.c |  142 ----
 sound/soc/blackfin/bfin-eval-adau1x81.c |  129 ----
 sound/soc/blackfin/bfin-eval-adav80x.c  |  145 ----
 25 files changed, 5364 deletions(-)
 delete mode 100644 sound/soc/blackfin/Kconfig
 delete mode 100644 sound/soc/blackfin/Makefile
 delete mode 100644 sound/soc/blackfin/bf5xx-ac97-pcm.c
 delete mode 100644 sound/soc/blackfin/bf5xx-ac97.c
 delete mode 100644 sound/soc/blackfin/bf5xx-ac97.h
 delete mode 100644 sound/soc/blackfin/bf5xx-ad1836.c
 delete mode 100644 sound/soc/blackfin/bf5xx-ad193x.c
 delete mode 100644 sound/soc/blackfin/bf5xx-ad1980.c
 delete mode 100644 sound/soc/blackfin/bf5xx-ad73311.c
 delete mode 100644 sound/soc/blackfin/bf5xx-i2s-pcm.c
 delete mode 100644 sound/soc/blackfin/bf5xx-i2s-pcm.h
 delete mode 100644 sound/soc/blackfin/bf5xx-i2s.c
 delete mode 100644 sound/soc/blackfin/bf5xx-sport.c
 delete mode 100644 sound/soc/blackfin/bf5xx-sport.h
 delete mode 100644 sound/soc/blackfin/bf5xx-ssm2602.c
 delete mode 100644 sound/soc/blackfin/bf6xx-i2s.c
 delete mode 100644 sound/soc/blackfin/bf6xx-sport.c
 delete mode 100644 sound/soc/blackfin/bf6xx-sport.h
 delete mode 100644 sound/soc/blackfin/bfin-eval-adau1373.c
 delete mode 100644 sound/soc/blackfin/bfin-eval-adau1701.c
 delete mode 100644 sound/soc/blackfin/bfin-eval-adau1x61.c
 delete mode 100644 sound/soc/blackfin/bfin-eval-adau1x81.c
 delete mode 100644 sound/soc/blackfin/bfin-eval-adav80x.c
sound/soc/Kconfig +0 -1
index 84c3582..41af6b9 100644
@@ -45,7 +45,6 @@ source "sound/soc/amd/Kconfig"
 source "sound/soc/atmel/Kconfig"
 source "sound/soc/au1x/Kconfig"
 source "sound/soc/bcm/Kconfig"
-source "sound/soc/blackfin/Kconfig"
 source "sound/soc/cirrus/Kconfig"
 source "sound/soc/davinci/Kconfig"
 source "sound/soc/dwc/Kconfig"
sound/soc/Makefile +0 -1
index 74cd185..8d92492 100644
@@ -29,7 +29,6 @@ obj-$(CONFIG_SND_SOC)	+= amd/
 obj-$(CONFIG_SND_SOC)	+= atmel/
 obj-$(CONFIG_SND_SOC)	+= au1x/
 obj-$(CONFIG_SND_SOC)	+= bcm/
-obj-$(CONFIG_SND_SOC)	+= blackfin/
 obj-$(CONFIG_SND_SOC)	+= cirrus/
 obj-$(CONFIG_SND_SOC)	+= davinci/
 obj-$(CONFIG_SND_SOC)	+= dwc/
sound/soc/blackfin/Kconfig deleted +0 -205

205 lines not on this page · raw message

sound/soc/blackfin/Makefile deleted +0 -40
deleted file mode 100644
index ebeb6a9..0000000
@@ -1,40 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Blackfin Platform Support
-snd-bf5xx-ac97-objs := bf5xx-ac97-pcm.o
-snd-bf5xx-i2s-objs := bf5xx-i2s-pcm.o
-snd-soc-bf5xx-sport-objs := bf5xx-sport.o
-snd-soc-bf6xx-sport-objs := bf6xx-sport.o
-snd-soc-bf5xx-ac97-objs := bf5xx-ac97.o
-snd-soc-bf5xx-i2s-objs := bf5xx-i2s.o
-snd-soc-bf6xx-i2s-objs := bf6xx-i2s.o
-
-obj-$(CONFIG_SND_BF5XX_AC97) += snd-bf5xx-ac97.o
-obj-$(CONFIG_SND_BF5XX_I2S) += snd-bf5xx-i2s.o
-obj-$(CONFIG_SND_BF5XX_SOC_SPORT) += snd-soc-bf5xx-sport.o
-obj-$(CONFIG_SND_BF6XX_SOC_SPORT) += snd-soc-bf6xx-sport.o
-obj-$(CONFIG_SND_BF5XX_SOC_AC97) += snd-soc-bf5xx-ac97.o
-obj-$(CONFIG_SND_BF5XX_SOC_I2S) += snd-soc-bf5xx-i2s.o
-obj-$(CONFIG_SND_BF6XX_SOC_I2S) += snd-soc-bf6xx-i2s.o
-
-# Blackfin Machine Support
-snd-ad1836-objs := bf5xx-ad1836.o
-snd-ad1980-objs := bf5xx-ad1980.o
-snd-ssm2602-objs := bf5xx-ssm2602.o
-snd-ad73311-objs := bf5xx-ad73311.o
-snd-ad193x-objs := bf5xx-ad193x.o
-snd-soc-bfin-eval-adau1373-objs := bfin-eval-adau1373.o
-snd-soc-bfin-eval-adau1x61-objs := bfin-eval-adau1x61.o
-snd-soc-bfin-eval-adau1x81-objs := bfin-eval-adau1x81.o
-snd-soc-bfin-eval-adau1701-objs := bfin-eval-adau1701.o
-snd-soc-bfin-eval-adav80x-objs := bfin-eval-adav80x.o
-
-obj-$(CONFIG_SND_BF5XX_SOC_AD1836) += snd-ad1836.o
-obj-$(CONFIG_SND_BF5XX_SOC_AD1980) += snd-ad1980.o
-obj-$(CONFIG_SND_BF5XX_SOC_SSM2602) += snd-ssm2602.o
-obj-$(CONFIG_SND_BF5XX_SOC_AD73311) += snd-ad73311.o
-obj-$(CONFIG_SND_BF5XX_SOC_AD193X) += snd-ad193x.o
-obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) += snd-soc-bfin-eval-adau1373.o
-obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) += snd-soc-bfin-eval-adau1x61.o
-obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X81) += snd-soc-bfin-eval-adau1x81.o
-obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) += snd-soc-bfin-eval-adau1701.o
-obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) += snd-soc-bfin-eval-adav80x.o
sound/soc/blackfin/bf5xx-ac97-pcm.c deleted +0 -480

480 lines not on this page · raw message

sound/soc/blackfin/bf5xx-ac97.c deleted +0 -388

388 lines not on this page · raw message

sound/soc/blackfin/bf5xx-ac97.h deleted +0 -57

57 lines not on this page · raw message

sound/soc/blackfin/bf5xx-ad1836.c deleted +0 -109

109 lines not on this page · raw message

sound/soc/blackfin/bf5xx-ad193x.c deleted +0 -131

131 lines not on this page · raw message

sound/soc/blackfin/bf5xx-ad1980.c deleted +0 -109

109 lines not on this page · raw message

sound/soc/blackfin/bf5xx-ad73311.c deleted +0 -212

212 lines not on this page · raw message

sound/soc/blackfin/bf5xx-i2s-pcm.c deleted +0 -373

373 lines not on this page · raw message

sound/soc/blackfin/bf5xx-i2s-pcm.h deleted +0 -17
deleted file mode 100644
index 1f04352..0000000
@@ -1,17 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _BF5XX_TDM_PCM_H
-#define _BF5XX_TDM_PCM_H
-
-#define BFIN_TDM_DAI_MAX_SLOTS 8
-
-struct bf5xx_i2s_pcm_data {
-	unsigned int map[BFIN_TDM_DAI_MAX_SLOTS];
-	bool tdm_mode;
-};
-
-#endif
sound/soc/blackfin/bf5xx-i2s.c deleted +0 -391

391 lines not on this page · raw message

sound/soc/blackfin/bf5xx-sport.c deleted +0 -1102

474 lines not on this page · raw message

sound/soc/blackfin/bf5xx-sport.h deleted +0 -174

174 lines not on this page · raw message

sound/soc/blackfin/bf5xx-ssm2602.c deleted +0 -126

126 lines not on this page · raw message

sound/soc/blackfin/bf6xx-i2s.c deleted +0 -239

239 lines not on this page · raw message

sound/soc/blackfin/bf6xx-sport.c deleted +0 -425

425 lines not on this page · raw message

sound/soc/blackfin/bf6xx-sport.h deleted +0 -82

82 lines not on this page · raw message

sound/soc/blackfin/bfin-eval-adau1373.c deleted +0 -173

173 lines not on this page · raw message

sound/soc/blackfin/bfin-eval-adau1701.c deleted +0 -113

113 lines not on this page · raw message

sound/soc/blackfin/bfin-eval-adau1x61.c deleted +0 -142

142 lines not on this page · raw message

sound/soc/blackfin/bfin-eval-adau1x81.c deleted +0 -129

129 lines not on this page · raw message

sound/soc/blackfin/bfin-eval-adav80x.c deleted +0 -145

145 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.7.4

Part of the diff is not shown here. View the raw message.

author
#6 lore raw

PATCH 9/28 input: Remove Blackfin input support

In reply to Aaron Wu

Remove Blackfin input support

---
 drivers/input/keyboard/Kconfig            |   9 -
 drivers/input/keyboard/Makefile           |   1 -
 drivers/input/keyboard/bf54x-keys.c       | 396 ------------------------------
 drivers/input/misc/Kconfig                |   9 -
 drivers/input/misc/Makefile               |   1 -
 drivers/input/misc/bfin_rotary.c          | 294 ----------------------
 include/linux/platform_data/bfin_rotary.h | 117 ---------
 7 files changed, 827 deletions(-)
 delete mode 100644 drivers/input/keyboard/bf54x-keys.c
 delete mode 100644 drivers/input/misc/bfin_rotary.c
 delete mode 100644 include/linux/platform_data/bfin_rotary.h
drivers/input/keyboard/Kconfig +0 -9
index 4c4ab1c..2b469cc 100644
@@ -157,15 +157,6 @@ config KEYBOARD_QT2160
 	  This driver can also be built as a module. If so, the module
 	  will be called qt2160.
 
-config KEYBOARD_BFIN
-	tristate "Blackfin BF54x keypad support"
-	depends on (BF54x && !BF544)
-	help
-	  Say Y here if you want to use the BF54x keypad.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bf54x-keys.
-
 config KEYBOARD_CLPS711X
 	tristate "CLPS711X Keypad support"
 	depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST)
drivers/input/keyboard/Makefile +0 -1
index 526e682..8fab920 100644
@@ -13,7 +13,6 @@ obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
 obj-$(CONFIG_KEYBOARD_BCM)		+= bcm-keypad.o
-obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_CAP11XX)		+= cap11xx.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
 obj-$(CONFIG_KEYBOARD_CROS_EC)		+= cros_ec_keyb.o
drivers/input/keyboard/bf54x-keys.c deleted +0 -396

396 lines not on this page · raw message

drivers/input/misc/Kconfig +0 -9
index 62a1312..e9770f5 100644
@@ -655,15 +655,6 @@ config INPUT_DM355EVM
 	  To compile this driver as a module, choose M here: the
 	  module will be called dm355evm_keys.
 
-config INPUT_BFIN_ROTARY
-	tristate "Blackfin Rotary support"
-	depends on BF54x || BF52x
-	help
-	  Say Y here if you want to use the Blackfin Rotary.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin-rotary.
-
 config INPUT_WM831X_ON
 	tristate "WM831X ON pin"
 	depends on MFD_WM831X
drivers/input/misc/Makefile +0 -1
index a8f61af..eb9c6c3 100644
@@ -19,7 +19,6 @@ obj-$(CONFIG_INPUT_ARIZONA_HAPTICS)	+= arizona-haptics.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
 obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH)	+= atmel_captouch.o
-obj-$(CONFIG_INPUT_BFIN_ROTARY)		+= bfin_rotary.o
 obj-$(CONFIG_INPUT_BMA150)		+= bma150.o
 obj-$(CONFIG_INPUT_CM109)		+= cm109.o
 obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
drivers/input/misc/bfin_rotary.c deleted +0 -294

294 lines not on this page · raw message

include/linux/platform_data/bfin_rotary.h deleted +0 -117

117 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#7 lore raw

PATCH 10/28 i2c: Remove Blackfin I2C bus support

In reply to Aaron Wu

Remove Blackfin I2C bus support

---
 drivers/i2c/busses/Kconfig        |  18 -
 drivers/i2c/busses/Makefile       |   1 -
 drivers/i2c/busses/i2c-bfin-twi.c | 737 --------------------------------------
 3 files changed, 756 deletions(-)
 delete mode 100644 drivers/i2c/busses/i2c-bfin-twi.c
drivers/i2c/busses/Kconfig +0 -18
index e2954fb..8ffe2bc 100644
@@ -445,24 +445,6 @@ config I2C_BRCMSTB
 
 	  If you do not need I2C interface, say N.
 
-config I2C_BLACKFIN_TWI
-	tristate "Blackfin TWI I2C support"
-	depends on BLACKFIN
-	depends on !BF561 && !BF531 && !BF532 && !BF533
-	help
-	  This is the I2C bus driver for Blackfin on-chip TWI interface.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-bfin-twi.
-
-config I2C_BLACKFIN_TWI_CLK_KHZ
-	int "Blackfin TWI I2C clock (kHz)"
-	depends on I2C_BLACKFIN_TWI
-	range 21 400
-	default 50
-	help
-	  The unit of the TWI clock is kHz.
-
 config I2C_CADENCE
 	tristate "Cadence I2C Controller"
 	depends on ARCH_ZYNQ || ARM64 || XTENSA
drivers/i2c/busses/Makefile +0 -1
index 2ce8576..9e475a5 100644
@@ -38,7 +38,6 @@ obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_AXXIA)		+= i2c-axxia.o
 obj-$(CONFIG_I2C_BCM2835)	+= i2c-bcm2835.o
 obj-$(CONFIG_I2C_BCM_IPROC)	+= i2c-bcm-iproc.o
-obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
 obj-$(CONFIG_I2C_CADENCE)	+= i2c-cadence.o
 obj-$(CONFIG_I2C_CBUS_GPIO)	+= i2c-cbus-gpio.o
 obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
drivers/i2c/busses/i2c-bfin-twi.c deleted +0 -737

737 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#8 lore raw

PATCH 11/28 misc: Remove Blackfin DSP echo support

In reply to Aaron Wu

Remove Blackfin DSP echo support

---
 drivers/misc/echo/echo.c | 73 ------------------------------------------------
 drivers/misc/echo/fir.h  | 50 ---------------------------------
 2 files changed, 123 deletions(-)
drivers/misc/echo/echo.c +0 -73
index 9597e95..8a5adc0 100644
@@ -115,78 +115,6 @@
 
 /* adapting coeffs using the traditional stochastic descent (N)LMS algorithm */
 
-#ifdef __bfin__
-static inline void lms_adapt_bg(struct oslec_state *ec, int clean, int shift)
-{
-	int i;
-	int offset1;
-	int offset2;
-	int factor;
-	int exp;
-	int16_t *phist;
-	int n;
-
-	if (shift > 0)
-		factor = clean << shift;
-	else
-		factor = clean >> -shift;
-
-	/* Update the FIR taps */
-
-	offset2 = ec->curr_pos;
-	offset1 = ec->taps - offset2;
-	phist = &ec->fir_state_bg.history[offset2];
-
-	/* st: and en: help us locate the assembler in echo.s */
-
-	/* asm("st:"); */
-	n = ec->taps;
-	for (i = 0; i < n; i++) {
-		exp = *phist++ * factor;
-		ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15);
-	}
-	/* asm("en:"); */
-
-	/* Note the asm for the inner loop above generated by Blackfin gcc
-	   4.1.1 is pretty good (note even parallel instructions used):
-
-	   R0 = W [P0++] (X);
-	   R0 *= R2;
-	   R0 = R0 + R3 (NS) ||
-	   R1 = W [P1] (X) ||
-	   nop;
-	   R0 >>>= 15;
-	   R0 = R0 + R1;
-	   W [P1++] = R0;
-
-	   A block based update algorithm would be much faster but the
-	   above can't be improved on much.  Every instruction saved in
-	   the loop above is 2 MIPs/ch!  The for loop above is where the
-	   Blackfin spends most of it's time - about 17 MIPs/ch measured
-	   with speedtest.c with 256 taps (32ms).  Write-back and
-	   Write-through cache gave about the same performance.
-	 */
-}
-
-/*
-   IDEAS for further optimisation of lms_adapt_bg():
-
-   1/ The rounding is quite costly.  Could we keep as 32 bit coeffs
-   then make filter pluck the MS 16-bits of the coeffs when filtering?
-   However this would lower potential optimisation of filter, as I
-   think the dual-MAC architecture requires packed 16 bit coeffs.
-
-   2/ Block based update would be more efficient, as per comments above,
-   could use dual MAC architecture.
-
-   3/ Look for same sample Blackfin LMS code, see if we can get dual-MAC
-   packing.
-
-   4/ Execute the whole e/c in a block of say 20ms rather than sample
-   by sample.  Processing a few samples every ms is inefficient.
-*/
-
-#else
 static inline void lms_adapt_bg(struct oslec_state *ec, int clean, int shift)
 {
 	int i;
@@ -215,7 +143,6 @@ static inline void lms_adapt_bg(struct oslec_state *ec, int clean, int shift)
 		ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15);
 	}
 }
-#endif
 
 static inline int top_bit(unsigned int bits)
 {
drivers/misc/echo/fir.h +0 -50

84 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#9 lore raw

PATCH 12/28 video: Remove Blackfin video support

In reply to Aaron Wu

Remove Blackfin video support

---
 drivers/video/console/Kconfig                |    2 +-
 drivers/video/fbdev/Kconfig                  |   83 --
 drivers/video/fbdev/Makefile                 |    5 -
 drivers/video/fbdev/bf537-lq035.c            |  891 --------------------
 drivers/video/fbdev/bf54x-lq043fb.c          |  764 -----------------
 drivers/video/fbdev/bfin-lq035q1-fb.c        |  864 --------------------
 drivers/video/fbdev/bfin-t350mcqb-fb.c       |  669 ---------------
 drivers/video/fbdev/bfin_adv7393fb.c         |  828 -------------------
 drivers/video/fbdev/bfin_adv7393fb.h         |  319 --------
 drivers/video/logo/Kconfig                   |   10 -
 drivers/video/logo/Makefile                  |    2 -
 drivers/video/logo/logo.c                    |    8 -
 drivers/video/logo/logo_blackfin_clut224.ppm | 1127 --------------------------
 drivers/video/logo/logo_blackfin_vga16.ppm   | 1127 --------------------------
 include/linux/fb.h                           |    3 +-
 include/linux/linux_logo.h                   |    2 -
 16 files changed, 2 insertions(+), 6702 deletions(-)
 delete mode 100644 drivers/video/fbdev/bf537-lq035.c
 delete mode 100644 drivers/video/fbdev/bf54x-lq043fb.c
 delete mode 100644 drivers/video/fbdev/bfin-lq035q1-fb.c
 delete mode 100644 drivers/video/fbdev/bfin-t350mcqb-fb.c
 delete mode 100644 drivers/video/fbdev/bfin_adv7393fb.c
 delete mode 100644 drivers/video/fbdev/bfin_adv7393fb.h
 delete mode 100644 drivers/video/logo/logo_blackfin_clut224.ppm
 delete mode 100644 drivers/video/logo/logo_blackfin_vga16.ppm
drivers/video/console/Kconfig +1 -1
index 7f1f1fb..8309b04 100644
@@ -7,7 +7,7 @@ menu "Console display driver support"
 config VGA_CONSOLE
 	bool "VGA text console" if EXPERT || !X86
 	depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !FRV && \
-		!SUPERH && !BLACKFIN && !AVR32 && !MN10300 && !CRIS && \
+		!SUPERH && !AVR32 && !MN10300 && !CRIS && \
 		(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
 		!ARM64 && !ARC && !MICROBLAZE && !OPENRISC
 	default y
drivers/video/fbdev/Kconfig +0 -83

95 lines not on this page · raw message

drivers/video/fbdev/Makefile +0 -5
index 115961e..55282a2 100644
@@ -136,11 +136,6 @@ obj-$(CONFIG_FB_VESA)             += vesafb.o
 obj-$(CONFIG_FB_EFI)              += efifb.o
 obj-$(CONFIG_FB_VGA16)            += vga16fb.o
 obj-$(CONFIG_FB_OF)               += offb.o
-obj-$(CONFIG_FB_BF537_LQ035)      += bf537-lq035.o
-obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
-obj-$(CONFIG_FB_BFIN_LQ035Q1)     += bfin-lq035q1-fb.o
-obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
-obj-$(CONFIG_FB_BFIN_7393)        += bfin_adv7393fb.o
 obj-$(CONFIG_FB_MX3)		  += mx3fb.o
 obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
 obj-$(CONFIG_FB_MXS)		  += mxsfb.o
drivers/video/fbdev/bf537-lq035.c deleted +0 -891

891 lines not on this page · raw message

drivers/video/fbdev/bf54x-lq043fb.c deleted +0 -764

764 lines not on this page · raw message

drivers/video/fbdev/bfin-lq035q1-fb.c deleted +0 -864

864 lines not on this page · raw message

drivers/video/fbdev/bfin-t350mcqb-fb.c deleted +0 -669

367 lines not on this page · raw message

drivers/video/fbdev/bfin_adv7393fb.c deleted +0 -828

828 lines not on this page · raw message

drivers/video/fbdev/bfin_adv7393fb.h deleted +0 -319

319 lines not on this page · raw message

drivers/video/logo/Kconfig +0 -10
index 0037104..723a649 100644

Lines of this file are not shown. View the raw message.

drivers/video/logo/Makefile +0 -2
index 6194373..7bba02c 100644

Lines of this file are not shown. View the raw message.

drivers/video/logo/logo.c +0 -8
index 4d50bfd..05b613e 100644

Lines of this file are not shown. View the raw message.

drivers/video/logo/logo_blackfin_clut224.ppm deleted +0 -1127

1,127 lines not on this page · raw message

drivers/video/logo/logo_blackfin_vga16.ppm deleted +0 -1127

1,127 lines not on this page · raw message

include/linux/fb.h +1 -2
index f577d3c..0c20da7 100644

Lines of this file are not shown. View the raw message.

include/linux/linux_logo.h +0 -2
index 5e3581d..9e1ec52 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.7.4

Part of the diff is not shown here. View the raw message.

author
#10 lore raw

PATCH 13/28 cpufreq: Remove Blackfin CPU frequency support

In reply to Aaron Wu

Remove Blackfin CPU frequency support

---
 drivers/cpufreq/Makefile           |    1 -
 drivers/cpufreq/blackfin-cpufreq.c |  217 ---
 drivers/cpufreq/cpufreq.c          | 2612 ------------------------------------
 3 files changed, 2830 deletions(-)
 delete mode 100644 drivers/cpufreq/blackfin-cpufreq.c
 delete mode 100644 drivers/cpufreq/cpufreq.c
drivers/cpufreq/Makefile +0 -1
index c60c1e1..43e4254 100644
@@ -100,7 +100,6 @@ obj-$(CONFIG_POWERNV_CPUFREQ)		+= powernv-cpufreq.o
 
 ##################################################################################
 # Other platform drivers
-obj-$(CONFIG_BFIN_CPU_FREQ)		+= blackfin-cpufreq.o
 obj-$(CONFIG_BMIPS_CPUFREQ)		+= bmips-cpufreq.o
 obj-$(CONFIG_CRIS_MACH_ARTPEC3)		+= cris-artpec3-cpufreq.o
 obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
drivers/cpufreq/blackfin-cpufreq.c deleted +0 -217

217 lines not on this page · raw message

drivers/cpufreq/cpufreq.c deleted +0 -2612

2,612 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#11 lore raw

PATCH 14/28 mtd: Remove Blackfin MTD support

In reply to Aaron Wu

Remove Blackfin MTD support

---
 drivers/mtd/maps/Kconfig            |  10 -
 drivers/mtd/maps/Makefile           |   1 -
 drivers/mtd/maps/bfin-async-flash.c | 196 --------
 drivers/mtd/nand/Kconfig            |  32 --
 drivers/mtd/nand/Makefile           |   1 -
 drivers/mtd/nand/bf5xx_nand.c       | 862 ------------------------------------
 6 files changed, 1102 deletions(-)
 delete mode 100644 drivers/mtd/maps/bfin-async-flash.c
 delete mode 100644 drivers/mtd/nand/bf5xx_nand.c
drivers/mtd/maps/Kconfig +0 -10
index 542fdf8..bdc1283 100644
@@ -334,16 +334,6 @@ config MTD_PCMCIA_ANONYMOUS
 
 	  If unsure, say N.
 
-config MTD_BFIN_ASYNC
-	tristate "Blackfin BF533-STAMP Flash Chip Support"
-	depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS
-	default y
-	help
-	  Map driver which allows for simultaneous utilization of
-	  ethernet and CFI parallel flash.
-
-	  If compiled as a module, it will be called bfin-async-flash.
-
 config MTD_GPIO_ADDR
 	tristate "GPIO-assisted Flash Chip Support"
 	depends on GPIOLIB || COMPILE_TEST
drivers/mtd/maps/Makefile +0 -1
index b849aaf..51acf1f 100644
@@ -42,7 +42,6 @@ obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
 obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
 obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
 obj-$(CONFIG_MTD_INTEL_VR_NOR)	+= intel_vr_nor.o
-obj-$(CONFIG_MTD_BFIN_ASYNC)	+= bfin-async-flash.o
 obj-$(CONFIG_MTD_RBTX4939)	+= rbtx4939-flash.o
 obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
 obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr-flash.o
drivers/mtd/maps/bfin-async-flash.c deleted +0 -196

196 lines not on this page · raw message

drivers/mtd/nand/Kconfig +0 -32
index 736ac88..c0bee1f0 100644
@@ -116,38 +116,6 @@ config MTD_NAND_AU1550
 	  This enables the driver for the NAND flash controller on the
 	  AMD/Alchemy 1550 SOC.
 
-config MTD_NAND_BF5XX
-	tristate "Blackfin on-chip NAND Flash Controller driver"
-	depends on BF54x || BF52x
-	help
-	  This enables the Blackfin on-chip NAND flash controller
-
-	  No board specific support is done by this driver, each board
-	  must advertise a platform_device for the driver to attach.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called bf5xx-nand.
-
-config MTD_NAND_BF5XX_HWECC
-	bool "BF5XX NAND Hardware ECC"
-	default y
-	depends on MTD_NAND_BF5XX
-	help
-	  Enable the use of the BF5XX's internal ECC generator when
-	  using NAND.
-
-config MTD_NAND_BF5XX_BOOTROM_ECC
-	bool "Use Blackfin BootROM ECC Layout"
-	default n
-	depends on MTD_NAND_BF5XX_HWECC
-	help
-	  If you wish to modify NAND pages and allow the Blackfin on-chip
-	  BootROM to boot from them, say Y here.  This is only necessary
-	  if you are booting U-Boot out of NAND and you wish to update
-	  U-Boot from Linux' userspace.  Otherwise, you should say N here.
-
-	  If unsure, say N.
-
 config MTD_NAND_S3C2410
 	tristate "NAND Flash support for Samsung S3C SoCs"
 	depends on ARCH_S3C24XX || ARCH_S3C64XX
drivers/mtd/nand/Makefile +0 -1
index 921634b..08fc018 100644
@@ -14,7 +14,6 @@ obj-$(CONFIG_MTD_NAND_DENALI)		+= denali.o
 obj-$(CONFIG_MTD_NAND_DENALI_PCI)	+= denali_pci.o
 obj-$(CONFIG_MTD_NAND_DENALI_DT)	+= denali_dt.o
 obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
-obj-$(CONFIG_MTD_NAND_BF5XX)		+= bf5xx_nand.o
 obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o
 obj-$(CONFIG_MTD_NAND_TANGO)		+= tango_nand.o
 obj-$(CONFIG_MTD_NAND_DAVINCI)		+= davinci_nand.o
drivers/mtd/nand/bf5xx_nand.c deleted +0 -862

862 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#12 lore raw

PATCH 15/28 spi: Remove Blackfin SPI bus support

In reply to Aaron Wu

Remove Blackfin SPI bus support

---
 drivers/spi/Kconfig          |   19 -
 drivers/spi/Makefile         |    2 -
 drivers/spi/spi-adi-v3.c     |  984 ----------------------------
 drivers/spi/spi-bfin-sport.c |  919 --------------------------
 drivers/spi/spi-bfin5xx.c    | 1462 ------------------------------------------
 5 files changed, 3386 deletions(-)
 delete mode 100644 drivers/spi/spi-adi-v3.c
 delete mode 100644 drivers/spi/spi-bfin-sport.c
 delete mode 100644 drivers/spi/spi-bfin5xx.c
drivers/spi/Kconfig +0 -19
index 6037839..1263014 100644
@@ -115,25 +115,6 @@ config SPI_BCM2835AUX
 	  "universal SPI master", and the regular SPI controller.
 	  This driver is for the universal/auxiliary SPI controller.
 
-config SPI_BFIN5XX
-	tristate "SPI controller driver for ADI Blackfin5xx"
-	depends on BLACKFIN && !BF60x
-	help
-	  This is the SPI controller master driver for Blackfin 5xx processor.
-
-config SPI_ADI_V3
-	tristate "SPI controller v3 for ADI"
-	depends on BF60x
-	help
-	  This is the SPI controller v3 master driver
-	  found on Blackfin 60x processor.
-
-config SPI_BFIN_SPORT
-	tristate "SPI bus via Blackfin SPORT"
-	depends on BLACKFIN
-	help
-	  Enable support for a SPI bus via the Blackfin SPORT peripheral.
-
 config SPI_BCM53XX
 	tristate "Broadcom BCM53xx SPI controller"
 	depends on ARCH_BCM_5301X
drivers/spi/Makefile +0 -2
index 34c5f28..31ee30d 100644
@@ -24,9 +24,7 @@ obj-$(CONFIG_SPI_BCM53XX)		+= spi-bcm53xx.o
 obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
 obj-$(CONFIG_SPI_BCM63XX_HSSPI)		+= spi-bcm63xx-hsspi.o
 obj-$(CONFIG_SPI_BCM_QSPI)		+= spi-iproc-qspi.o spi-brcmstb-qspi.o spi-bcm-qspi.o
-obj-$(CONFIG_SPI_BFIN5XX)		+= spi-bfin5xx.o
 obj-$(CONFIG_SPI_ADI_V3)                += spi-adi-v3.o
-obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
 obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o
 obj-$(CONFIG_SPI_CADENCE)		+= spi-cadence.o
drivers/spi/spi-adi-v3.c deleted +0 -984

984 lines not on this page · raw message

drivers/spi/spi-bfin-sport.c deleted +0 -919

919 lines not on this page · raw message

drivers/spi/spi-bfin5xx.c deleted +0 -1462

1,063 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.7.4

Part of the diff is not shown here. View the raw message.

author
#13 lore raw

PATCH 16/28 irda: Remove Blackfin IRDA support

In reply to Aaron Wu

Remove Blackfin IRDA support

---
 drivers/staging/irda/drivers/Kconfig    |  45 --
 drivers/staging/irda/drivers/Makefile   |   1 -
 drivers/staging/irda/drivers/bfin_sir.c | 819 --------------------------------
 drivers/staging/irda/drivers/bfin_sir.h |  93 ----
 4 files changed, 958 deletions(-)
 delete mode 100644 drivers/staging/irda/drivers/bfin_sir.c
 delete mode 100644 drivers/staging/irda/drivers/bfin_sir.h
drivers/staging/irda/drivers/Kconfig +0 -45
index e070e12..71ac76c 100644
@@ -17,51 +17,6 @@ config IRTTY_SIR
 
 	  If unsure, say Y.
 
-config BFIN_SIR
-	tristate "Blackfin SIR on UART"
-	depends on BLACKFIN && IRDA
-	default n
-	help
-	  Say Y here if your want to enable SIR function on Blackfin UART
-	  devices.
-
-	  To activate this driver you can start irattach like:
-	  "irattach irda0 -s"
-
-	  Saying M, it will be built as a module named bfin_sir.
-
-	  Note that you need to turn off one of the serial drivers for SIR
-	  to use that UART.
-
-config BFIN_SIR0
-	bool "Blackfin SIR on UART0"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART0
-
-config BFIN_SIR1
-	bool "Blackfin SIR on UART1"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
-
-config BFIN_SIR2
-	bool "Blackfin SIR on UART2"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
-
-config BFIN_SIR3
-	bool "Blackfin SIR on UART3"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
-
-choice
-	prompt "SIR Mode"
-	depends on BFIN_SIR
-	default SIR_BFIN_DMA
-
-config SIR_BFIN_DMA
-	bool "DMA mode"
-	depends on !DMA_UNCACHED_NONE
-
-config SIR_BFIN_PIO
-	bool "PIO mode"
-endchoice
-
 config SH_SIR
 	tristate "SuperH SIR on UART"
 	depends on IRDA && SUPERH && \
drivers/staging/irda/drivers/Makefile +0 -1
index e2901b1..d5307ed 100644
@@ -23,7 +23,6 @@ obj-$(CONFIG_MCS_FIR)	        += mcs7780.o
 obj-$(CONFIG_AU1000_FIR)	+= au1k_ir.o
 # SIR drivers
 obj-$(CONFIG_IRTTY_SIR)		+= irtty-sir.o	sir-dev.o
-obj-$(CONFIG_BFIN_SIR)		+= bfin_sir.o
 obj-$(CONFIG_SH_SIR)		+= sh_sir.o
 # dongle drivers for SIR drivers
 obj-$(CONFIG_ESI_DONGLE)	+= esi-sir.o
drivers/staging/irda/drivers/bfin_sir.c deleted +0 -819

819 lines not on this page · raw message

drivers/staging/irda/drivers/bfin_sir.h deleted +0 -93

93 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#14 lore raw

PATCH 17/28 usb: Remove Blackfin USB support

In reply to Aaron Wu

Remove Blackfin USB support

---
 drivers/usb/gadget/function/f_uac1_legacy.c |   2 -
 drivers/usb/gadget/function/u_uac1_legacy.c |   2 -
 drivers/usb/gadget/function/u_uac1_legacy.h |   2 -
 drivers/usb/gadget/legacy/audio.c           |   2 -
 drivers/usb/host/isp1362.h                  |  45 --
 drivers/usb/musb/Kconfig                    |  12 +-
 drivers/usb/musb/Makefile                   |   1 -
 drivers/usb/musb/blackfin.c                 | 623 ----------------------------
 drivers/usb/musb/blackfin.h                 |  81 ----
 drivers/usb/musb/musb_core.c                |   7 +-
 drivers/usb/musb/musb_core.h                |  42 --
 drivers/usb/musb/musb_debugfs.c             |   2 -
 drivers/usb/musb/musb_dma.h                 |  11 -
 drivers/usb/musb/musb_gadget.c              |  32 --
 drivers/usb/musb/musb_regs.h                | 182 --------
 drivers/usb/musb/musbhsdma.c                |   5 -
 drivers/usb/musb/musbhsdma.h                |  90 ----
 drivers/usb/serial/ftdi_sio_ids.h           |   8 -
 include/linux/usb/musb.h                    |   7 -
 19 files changed, 3 insertions(+), 1153 deletions(-)
 delete mode 100644 drivers/usb/musb/blackfin.c
 delete mode 100644 drivers/usb/musb/blackfin.h
drivers/usb/gadget/function/f_uac1_legacy.c +0 -2
index 04f4b28..24c086b 100644
@@ -4,8 +4,6 @@
   *
  * Copyright (C) 2008 Bryan Wu <[email protected]>
  * Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
  */
 
 #include <linux/slab.h>
drivers/usb/gadget/function/u_uac1_legacy.c +0 -2
index cbc868d..5393e5c 100644
@@ -4,8 +4,6 @@
  *
  * Copyright (C) 2008 Bryan Wu <[email protected]>
  * Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
  */
 
 #include <linux/kernel.h>
drivers/usb/gadget/function/u_uac1_legacy.h +0 -2
index dd69e40..5c1bdf4 100644
@@ -4,8 +4,6 @@
  *
  * Copyright (C) 2008 Bryan Wu <[email protected]>
  * Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
  */
 
 #ifndef __U_UAC1_LEGACY_H
drivers/usb/gadget/legacy/audio.c +0 -2
index 7b11dce..dd81fd5 100644
@@ -4,8 +4,6 @@
  *
  * Copyright (C) 2008 Bryan Wu <[email protected]>
  * Copyright (C) 2008 Analog Devices, Inc
- *
- * Enter bugs at http://blackfin.uclinux.org/
  */
 
 /* #define VERBOSE_DEBUG */
drivers/usb/host/isp1362.h +0 -45

57 lines not on this page · raw message

drivers/usb/musb/Kconfig +2 -10
index 5506a9c..a424cc5 100644
@@ -18,9 +18,6 @@ config USB_MUSB_HDRC
 	  Texas Instruments families using this IP include DaVinci
 	  (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
 
-	  Analog Devices parts using this IP include Blackfin BF54x,
-	  BF525 and BF527.
-
 	  Allwinner SoCs using this IP include A10, A13, A20, ...
 
 	  If you do not know what this is, please say N.
@@ -87,7 +84,7 @@ config USB_MUSB_DA8XX
 config USB_MUSB_TUSB6010
 	tristate "TUSB6010"
 	depends on HAS_IOMEM
-	depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN
+	depends on (ARCH_OMAP2PLUS || COMPILE_TEST)
 	depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
 
 config USB_MUSB_OMAP2PLUS
@@ -107,11 +104,6 @@ config USB_MUSB_DSPS
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	depends on OF_IRQ
 
-config USB_MUSB_BLACKFIN
-	tristate "Blackfin"
-	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
-	depends on NOP_USB_XCEIV
-
 config USB_MUSB_UX500
 	tristate "Ux500 platforms"
 	depends on ARCH_U8500 || COMPILE_TEST
@@ -149,7 +141,7 @@ config USB_UX500_DMA
 
 config USB_INVENTRA_DMA
 	bool 'Inventra'
-	depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
+	depends on USB_MUSB_OMAP2PLUS
 	help
 	  Enable DMA transfers using Mentor's engine.
 
drivers/usb/musb/Makefile +0 -1
index 79d4d54..3a88c79 100644
@@ -21,7 +21,6 @@ obj-$(CONFIG_USB_MUSB_DSPS)			+= musb_dsps.o
 obj-$(CONFIG_USB_MUSB_TUSB6010)			+= tusb6010.o
 obj-$(CONFIG_USB_MUSB_DAVINCI)			+= davinci.o
 obj-$(CONFIG_USB_MUSB_DA8XX)			+= da8xx.o
-obj-$(CONFIG_USB_MUSB_BLACKFIN)			+= blackfin.o
 obj-$(CONFIG_USB_MUSB_UX500)			+= ux500.o
 obj-$(CONFIG_USB_MUSB_JZ4740)			+= jz4740.o
 obj-$(CONFIG_USB_MUSB_SUNXI)			+= sunxi.o
drivers/usb/musb/blackfin.c deleted +0 -623

623 lines not on this page · raw message

drivers/usb/musb/blackfin.h deleted +0 -81

81 lines not on this page · raw message

drivers/usb/musb/musb_core.c +1 -6
index eef4ad5..1348658 100644
@@ -126,7 +126,6 @@ EXPORT_SYMBOL_GPL(musb_get_mode);
 
 /*-------------------------------------------------------------------------*/
 
-#ifndef CONFIG_BLACKFIN
 static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
 {
 	void __iomem *addr = phy->io_priv;
@@ -208,10 +207,6 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
 
 	return ret;
 }
-#else
-#define musb_ulpi_read		NULL
-#define musb_ulpi_write		NULL
-#endif
 
 static struct usb_phy_io_ops musb_ulpi_access = {
 	.read = musb_ulpi_read,
@@ -2171,7 +2166,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	 *   - initializes musb->xceiv, usually by otg_get_phy()
 	 *   - stops powering VBUS
 	 *
-	 * There are various transceiver configurations.  Blackfin,
+	 * There are various transceiver configurations.
 	 * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
 	 * external/discrete ones in various flavors (twl4030 family,
 	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
drivers/usb/musb/musb_core.h +0 -42

60 lines not on this page · raw message

drivers/usb/musb/musb_debugfs.c +0 -2
index 7cf5a1b..7dac456 100644
@@ -70,7 +70,6 @@ static const struct musb_register_map musb_regmap[] = {
 	{ "DMA_CNTLch7",	0x274,	16 },
 	{ "DMA_ADDRch7",	0x278,	32 },
 	{ "DMA_COUNTch7",	0x27C,	32 },
-#ifndef CONFIG_BLACKFIN
 	{ "ConfigData",	MUSB_CONFIGDATA,8 },
 	{ "BabbleCtl",	MUSB_BABBLE_CTL,8 },
 	{ "TxFIFOsz",	MUSB_TXFIFOSZ,	8 },
@@ -79,7 +78,6 @@ static const struct musb_register_map musb_regmap[] = {
 	{ "RxFIFOadd",	MUSB_RXFIFOADD,	16 },
 	{ "EPInfo",	MUSB_EPINFO,	8 },
 	{ "RAMInfo",	MUSB_RAMINFO,	8 },
-#endif
 	{  }	/* Terminating Entry */
 };
 
drivers/usb/musb/musb_dma.h +0 -11
index a4241f4..0fc8cd0 100644
@@ -80,17 +80,6 @@ struct musb_hw_ep;
 #define	is_cppi_enabled(musb)	0
 #endif
 
-/* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1
- *	Only allow DMA mode 1 to be used when the USB will actually generate the
- *	interrupts we expect.
- */
-#ifdef CONFIG_BLACKFIN
-# undef USE_MODE1
-# if !ANOMALY_05000456
-#  define USE_MODE1
-# endif
-#endif
-
 /*
  * DMA channel status ... updated by the dma controller driver whenever that
  * status changes, and protected by the overall controller spinlock.
drivers/usb/musb/musb_gadget.c +0 -32
index 293e5b8..1e40a81 100644
@@ -1680,39 +1680,7 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
-#ifdef CONFIG_BLACKFIN
-static struct usb_ep *musb_match_ep(struct usb_gadget *g,
-		struct usb_endpoint_descriptor *desc,
-		struct usb_ss_ep_comp_descriptor *ep_comp)
-{
-	struct usb_ep *ep = NULL;
-
-	switch (usb_endpoint_type(desc)) {
-	case USB_ENDPOINT_XFER_ISOC:
-	case USB_ENDPOINT_XFER_BULK:
-		if (usb_endpoint_dir_in(desc))
-			ep = gadget_find_ep_by_name(g, "ep5in");
-		else
-			ep = gadget_find_ep_by_name(g, "ep6out");
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		if (usb_endpoint_dir_in(desc))
-			ep = gadget_find_ep_by_name(g, "ep1in");
-		else
-			ep = gadget_find_ep_by_name(g, "ep2out");
-		break;
-	default:
-		break;
-	}
-
-	if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
-		return ep;
-
-	return NULL;
-}
-#else
 #define musb_match_ep NULL
-#endif
 
 static int musb_gadget_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver);
drivers/usb/musb/musb_regs.h +0 -182

192 lines not on this page · raw message

drivers/usb/musb/musbhsdma.c +0 -5
index 21fb9e6..4389fc3 100644
@@ -235,11 +235,6 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
 
 	int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
 
-#ifdef CONFIG_BLACKFIN
-	/* Clear DMA interrupt flags */
-	musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma);
-#endif
-
 	if (!int_hsdma) {
 		musb_dbg(musb, "spurious DMA irq");
 
drivers/usb/musb/musbhsdma.h +0 -64

76 lines not on this page · raw message

include/linux/usb/musb.h +0 -7
index 5d19e67..9eb908a 100644
@@ -89,13 +89,6 @@ struct musb_hdrc_config {
 	u8		ram_bits;	/* ram address size */
 
 	struct musb_hdrc_eps_bits *eps_bits __deprecated;
-#ifdef CONFIG_BLACKFIN
-	/* A GPIO controlling VRSEL in Blackfin */
-	unsigned int	gpio_vrsel;
-	unsigned int	gpio_vrsel_active;
-	/* musb CLKIN in Blackfin in MHZ */
-	unsigned char   clkin;
-#endif
 	u32		maximum_speed;
 };
 
Signature · 1 line
2.7.4
author
#15 lore raw

PATCH 18/28 crypto: Remove Blackfin crypto support

In reply to Aaron Wu

Remove Blackfin crypto support

---
 crypto/testmgr.c          |   6 -
 crypto/testmgr.h          |  88 ------
 drivers/crypto/Kconfig    |   7 -
 drivers/crypto/Makefile   |   1 -
 drivers/crypto/bfin_crc.c | 743 ----------------------------------------------
 drivers/crypto/bfin_crc.h | 124 --------
 6 files changed, 969 deletions(-)
 delete mode 100644 drivers/crypto/bfin_crc.c
 delete mode 100644 drivers/crypto/bfin_crc.h
crypto/testmgr.c +0 -6
index d5e23a1..8dacd69 100644
@@ -3070,12 +3070,6 @@ static const struct alg_test_desc alg_test_descs[] = {
 			.hash = __VECS(ghash_tv_template)
 		}
 	}, {
-		.alg = "hmac(crc32)",
-		.test = alg_test_hash,
-		.suite = {
-			.hash = __VECS(bfin_crc_tv_template)
-		}
-	}, {
 		.alg = "hmac(md5)",
 		.test = alg_test_hash,
 		.suite = {
crypto/testmgr.h +0 -88

94 lines not on this page · raw message

drivers/crypto/Kconfig +0 -7
index 4b741b8..c17368c 100644
@@ -464,13 +464,6 @@ if CRYPTO_DEV_UX500
 	source "drivers/crypto/ux500/Kconfig"
 endif # if CRYPTO_DEV_UX500
 
-config CRYPTO_DEV_BFIN_CRC
-	tristate "Support for Blackfin CRC hardware"
-	depends on BF60x
-	help
-	  Newer Blackfin processors have CRC hardware. Select this if you
-	  want to use the Blackfin CRC module.
-
 config CRYPTO_DEV_ATMEL_AUTHENC
 	tristate "Support for Atmel IPSEC/SSL hw accelerator"
 	depends on HAS_DMA
drivers/crypto/Makefile +0 -1
index 2513d13..c08622b 100644
@@ -3,7 +3,6 @@ obj-$(CONFIG_CRYPTO_DEV_ATMEL_AES) += atmel-aes.o
 obj-$(CONFIG_CRYPTO_DEV_ATMEL_SHA) += atmel-sha.o
 obj-$(CONFIG_CRYPTO_DEV_ATMEL_TDES) += atmel-tdes.o
 obj-$(CONFIG_CRYPTO_DEV_ATMEL_ECC) += atmel-ecc.o
-obj-$(CONFIG_CRYPTO_DEV_BFIN_CRC) += bfin_crc.o
 obj-$(CONFIG_CRYPTO_DEV_CAVIUM_ZIP) += cavium/
 obj-$(CONFIG_CRYPTO_DEV_CCP) += ccp/
 obj-$(CONFIG_CRYPTO_DEV_CHELSIO) += chelsio/
drivers/crypto/bfin_crc.c deleted +0 -743

743 lines not on this page · raw message

drivers/crypto/bfin_crc.h deleted +0 -124

124 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#16 lore raw

PATCH 19/28 ata: Remove Blackfin PATA support

In reply to Aaron Wu

Remove Blackfin PATA support

---
 drivers/ata/Kconfig      |    9 -
 drivers/ata/Makefile     |    1 -
 drivers/ata/pata_bf54x.c | 1703 ----------------------------------------------
 3 files changed, 1713 deletions(-)
 delete mode 100644 drivers/ata/pata_bf54x.c
drivers/ata/Kconfig +0 -9
index a7120d6..4582fa2 100644
@@ -549,15 +549,6 @@ config PATA_ATP867X
 
 	  If unsure, say N.
 
-config PATA_BF54X
-	tristate "Blackfin 54x ATAPI support"
-	depends on BF542 || BF548 || BF549
-	help
-	  This option enables support for the built-in ATAPI controller on
-	  Blackfin 54x family chips.
-
-	  If unsure, say N.
-
 config PATA_BK3710
 	tristate "Palmchip BK3710 PATA support"
 	depends on ARCH_DAVINCI
drivers/ata/Makefile +0 -1
index f1f5a3f..6dae8c9 100644
@@ -53,7 +53,6 @@ obj-$(CONFIG_PATA_AMD)		+= pata_amd.o
 obj-$(CONFIG_PATA_ARTOP)	+= pata_artop.o
 obj-$(CONFIG_PATA_ATIIXP)	+= pata_atiixp.o
 obj-$(CONFIG_PATA_ATP867X)	+= pata_atp867x.o
-obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
 obj-$(CONFIG_PATA_BK3710)	+= pata_bk3710.o
 obj-$(CONFIG_PATA_CMD64X)	+= pata_cmd64x.o
 obj-$(CONFIG_PATA_CS5520)	+= pata_cs5520.o
drivers/ata/pata_bf54x.c deleted +0 -1703

1,703 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#17 lore raw

PATCH 20/28 pwm: Remove Blackfin PWM support

In reply to Aaron Wu

Remove Blackfin PWM support

---
 drivers/pwm/Kconfig    |   9 ---
 drivers/pwm/Makefile   |   1 -
 drivers/pwm/pwm-bfin.c | 157 -------------------------------------------------
 3 files changed, 167 deletions(-)
 delete mode 100644 drivers/pwm/pwm-bfin.c
drivers/pwm/Kconfig +0 -9
index 763ee50..5d9868d 100644
@@ -113,15 +113,6 @@ config PWM_BERLIN
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-berlin.
 
-config PWM_BFIN
-	tristate "Blackfin PWM support"
-	depends on BFIN_GPTIMERS
-	help
-	  Generic PWM framework driver for Blackfin.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called pwm-bfin.
-
 config PWM_BRCMSTB
 	tristate "Broadcom STB PWM support"
 	depends on ARCH_BRCMSTB || BMIPS_GENERIC
drivers/pwm/Makefile +0 -1
index 0258a74..9c676a0 100644
@@ -9,7 +9,6 @@ obj-$(CONFIG_PWM_BCM_IPROC)	+= pwm-bcm-iproc.o
 obj-$(CONFIG_PWM_BCM_KONA)	+= pwm-bcm-kona.o
 obj-$(CONFIG_PWM_BCM2835)	+= pwm-bcm2835.o
 obj-$(CONFIG_PWM_BERLIN)	+= pwm-berlin.o
-obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
 obj-$(CONFIG_PWM_BRCMSTB)	+= pwm-brcmstb.o
 obj-$(CONFIG_PWM_CLPS711X)	+= pwm-clps711x.o
 obj-$(CONFIG_PWM_CRC)		+= pwm-crc.o
drivers/pwm/pwm-bfin.c deleted +0 -157

157 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#18 lore raw

PATCH 21/28 pcmcia: Remove Blackfin PCMCIA support

In reply to Aaron Wu

Remove Blackfin PCMCIA support

---
 drivers/pcmcia/Kconfig          |   7 -
 drivers/pcmcia/Makefile         |   1 -
 drivers/pcmcia/bfin_cf_pcmcia.c | 316 ----------------------------------------
 3 files changed, 324 deletions(-)
 delete mode 100644 drivers/pcmcia/bfin_cf_pcmcia.c
drivers/pcmcia/Kconfig +0 -7
index d3c378b..9f63c66 100644
@@ -266,13 +266,6 @@ config OMAP_CF
 	  Say Y here to support the CompactFlash controller on OMAP.
 	  Note that this doesn't support "True IDE" mode.
 
-config BFIN_CFPCMCIA
-	tristate "Blackfin CompactFlash PCMCIA Driver"
-	depends on PCMCIA && BLACKFIN
-	help
-	  Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
-
-
 config AT91_CF
 	tristate "AT91 CompactFlash Controller"
 	depends on PCI
drivers/pcmcia/Makefile +0 -1
index e7dae16..55a2268 100644
@@ -34,7 +34,6 @@ obj-$(CONFIG_PCMCIA_BCM63XX)			+= bcm63xx_pcmcia.o
 obj-$(CONFIG_PCMCIA_VRC4171)			+= vrc4171_card.o
 obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc4173_cardu.o
 obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
-obj-$(CONFIG_BFIN_CFPCMCIA)			+= bfin_cf_pcmcia.o
 obj-$(CONFIG_AT91_CF)				+= at91_cf.o
 obj-$(CONFIG_ELECTRA_CF)			+= electra_cf.o
 obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD)		+= db1xxx_ss.o
drivers/pcmcia/bfin_cf_pcmcia.c deleted +0 -316

316 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#19 lore raw

PATCH 22/28 can: Remove Blackfin CAN bus support

In reply to Aaron Wu

Remove Blackfin CAN bus support

---
 drivers/net/can/Kconfig    |   9 -
 drivers/net/can/Makefile   |   1 -
 drivers/net/can/bfin_can.c | 784 ---------------------------------------------
 3 files changed, 794 deletions(-)
 delete mode 100644 drivers/net/can/bfin_can.c
drivers/net/can/Kconfig +0 -9
index ac4ff39..2cb7598 100644
@@ -88,15 +88,6 @@ config CAN_AT91
 	  This is a driver for the SoC CAN controller in Atmel's AT91SAM9263
 	  and AT91SAM9X5 processors.
 
-config CAN_BFIN
-	depends on BF534 || BF536 || BF537 || BF538 || BF539 || BF54x
-	tristate "Analog Devices Blackfin on-chip CAN"
-	---help---
-	  Driver for the Analog Devices Blackfin on-chip CAN controllers
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_can.
-
 config CAN_FLEXCAN
 	tristate "Support for Freescale FLEXCAN based chips"
 	depends on ARM || PPC
drivers/net/can/Makefile +0 -1
index 02b8ed7..44922bf 100644
@@ -19,7 +19,6 @@ obj-y				+= usb/
 obj-y				+= softing/
 
 obj-$(CONFIG_CAN_AT91)		+= at91_can.o
-obj-$(CONFIG_CAN_BFIN)		+= bfin_can.o
 obj-$(CONFIG_CAN_CC770)		+= cc770/
 obj-$(CONFIG_CAN_C_CAN)		+= c_can/
 obj-$(CONFIG_CAN_FLEXCAN)	+= flexcan.o
drivers/net/can/bfin_can.c deleted +0 -784

784 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#20 lore raw

PATCH 23/28 char: Remove Blackfin OTP support

In reply to Aaron Wu

Remove Blackfin OTP support

---
 drivers/char/Kconfig    |  28 ------
 drivers/char/Makefile   |   1 -
 drivers/char/bfin-otp.c | 237 ------------------------------------------------
 3 files changed, 266 deletions(-)
 delete mode 100644 drivers/char/bfin-otp.c
drivers/char/Kconfig +0 -28
index c28dca0..8f64ce8 100644
@@ -66,34 +66,6 @@ config TTY_PRINTK
 
 	  If unsure, say N.
 
-config BFIN_OTP
-	tristate "Blackfin On-Chip OTP Memory Support"
-	depends on BLACKFIN && (BF51x || BF52x || BF54x)
-	default y
-	help
-	  If you say Y here, you will get support for a character device
-	  interface into the One Time Programmable memory pages that are
-	  stored on the Blackfin processor.  This will not get you access
-	  to the secure memory pages however.  You will need to write your
-	  own secure code and reader for that.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called bfin-otp.
-
-	  If unsure, it is safe to say Y.
-
-config BFIN_OTP_WRITE_ENABLE
-	bool "Enable writing support of OTP pages"
-	depends on BFIN_OTP
-	default n
-	help
-	  If you say Y here, you will enable support for writing of the
-	  OTP pages.  This is dangerous by nature as you can only program
-	  the pages once, so only enable this option when you actually
-	  need it so as to not inadvertently clobber data.
-
-	  If unsure, say N.
-
 config PRINTER
 	tristate "Parallel printer support"
 	depends on PARPORT
drivers/char/Makefile +0 -1
index 7dc3abe..f28d07b 100644
@@ -14,7 +14,6 @@ obj-$(CONFIG_MSPEC)		+= mspec.o
 obj-$(CONFIG_UV_MMTIMER)	+= uv_mmtimer.o
 obj-$(CONFIG_IBM_BSR)		+= bsr.o
 obj-$(CONFIG_SGI_MBCS)		+= mbcs.o
-obj-$(CONFIG_BFIN_OTP)		+= bfin-otp.o
 
 obj-$(CONFIG_PRINTER)		+= lp.o
 
drivers/char/bfin-otp.c deleted +0 -237

237 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#21 lore raw

PATCH 24/28 pinctrl: Remove Blackfin pinctrl support

In reply to Aaron Wu

Remove Blackfin pinctrl support

---
 drivers/pinctrl/Kconfig              |   19 -
 drivers/pinctrl/Makefile             |    3 -
 drivers/pinctrl/pinctrl-adi2-bf54x.c |  588 ------------------
 drivers/pinctrl/pinctrl-adi2-bf60x.c |  517 ----------------
 drivers/pinctrl/pinctrl-adi2.c       | 1114 ----------------------------------
 drivers/pinctrl/pinctrl-adi2.h       |   75 ---
 6 files changed, 2316 deletions(-)
 delete mode 100644 drivers/pinctrl/pinctrl-adi2-bf54x.c
 delete mode 100644 drivers/pinctrl/pinctrl-adi2-bf60x.c
 delete mode 100644 drivers/pinctrl/pinctrl-adi2.c
 delete mode 100644 drivers/pinctrl/pinctrl-adi2.h
drivers/pinctrl/Kconfig +0 -19
index 0f254b3..0080735 100644
@@ -30,17 +30,6 @@ config DEBUG_PINCTRL
 	help
 	  Say Y here to add some extra checks and diagnostics to PINCTRL calls.
 
-config PINCTRL_ADI2
-	bool "ADI pin controller driver"
-	depends on (BF54x || BF60x)
-	depends on !GPIO_ADI
-	select PINMUX
-	select IRQ_DOMAIN
-	help
-	  This is the pin controller and gpio driver for ADI BF54x, BF60x and
-	  future processors. This option is selected automatically when specific
-	  machine and arch are selected to build.
-
 config PINCTRL_ARTPEC6
         bool "Axis ARTPEC-6 pin controller driver"
         depends on MACH_ARTPEC6
@@ -77,14 +66,6 @@ config PINCTRL_AXP209
 	  selected.
 	  Say yes to enable pinctrl and GPIO support for the AXP209 PMIC
 
-config PINCTRL_BF54x
-	def_bool y if BF54x
-	select PINCTRL_ADI2
-
-config PINCTRL_BF60x
-	def_bool y if BF60x
-	select PINCTRL_ADI2
-
 config PINCTRL_AT91
 	bool "AT91 pinctrl driver"
 	depends on OF
drivers/pinctrl/Makefile +0 -3
index d369263..92a40bd 100644
@@ -8,12 +8,9 @@ obj-$(CONFIG_PINMUX)		+= pinmux.o
 obj-$(CONFIG_PINCONF)		+= pinconf.o
 obj-$(CONFIG_OF)		+= devicetree.o
 obj-$(CONFIG_GENERIC_PINCONF)	+= pinconf-generic.o
-obj-$(CONFIG_PINCTRL_ADI2)	+= pinctrl-adi2.o
 obj-$(CONFIG_PINCTRL_ARTPEC6)	+= pinctrl-artpec6.o
 obj-$(CONFIG_PINCTRL_AS3722)	+= pinctrl-as3722.o
 obj-$(CONFIG_PINCTRL_AXP209)	+= pinctrl-axp209.o
-obj-$(CONFIG_PINCTRL_BF54x)	+= pinctrl-adi2-bf54x.o
-obj-$(CONFIG_PINCTRL_BF60x)	+= pinctrl-adi2-bf60x.o
 obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_AT91PIO4)	+= pinctrl-at91-pio4.o
 obj-$(CONFIG_PINCTRL_AMD)	+= pinctrl-amd.o
drivers/pinctrl/pinctrl-adi2-bf54x.c deleted +0 -588

588 lines not on this page · raw message

drivers/pinctrl/pinctrl-adi2-bf60x.c deleted +0 -517

517 lines not on this page · raw message

drivers/pinctrl/pinctrl-adi2.c deleted +0 -1114

1,114 lines not on this page · raw message

drivers/pinctrl/pinctrl-adi2.h deleted +0 -75

75 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#22 lore raw

PATCH 25/28 staging: Remove Blackfin iio trigger timer support

In reply to Aaron Wu

Remove Blackfin iio trigger timer support

---
 drivers/staging/iio/Kconfig                       |   1 -
 drivers/staging/iio/Makefile                      |   1 -
 drivers/staging/iio/trigger/Kconfig               |  19 --
 drivers/staging/iio/trigger/Makefile              |   5 -
 drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 292 ----------------------
 drivers/staging/iio/trigger/iio-trig-bfin-timer.h |  25 --
 6 files changed, 343 deletions(-)
 delete mode 100644 drivers/staging/iio/trigger/Kconfig
 delete mode 100644 drivers/staging/iio/trigger/Makefile
 delete mode 100644 drivers/staging/iio/trigger/iio-trig-bfin-timer.c
 delete mode 100644 drivers/staging/iio/trigger/iio-trig-bfin-timer.h
drivers/staging/iio/Kconfig +0 -1
index 8abc1ab..bd94459 100644
@@ -14,6 +14,5 @@ source "drivers/staging/iio/impedance-analyzer/Kconfig"
 source "drivers/staging/iio/light/Kconfig"
 source "drivers/staging/iio/meter/Kconfig"
 source "drivers/staging/iio/resolver/Kconfig"
-source "drivers/staging/iio/trigger/Kconfig"
 
 endmenu
drivers/staging/iio/Makefile +0 -1
index 455bffc..e99a375 100644
@@ -13,4 +13,3 @@ obj-y += impedance-analyzer/
 obj-y += light/
 obj-y += meter/
 obj-y += resolver/
-obj-y += trigger/
drivers/staging/iio/trigger/Kconfig deleted +0 -19
deleted file mode 100644
index 0b01d24..0000000
@@ -1,19 +0,0 @@
-  #
-# Industrial I/O standalone triggers
-#
-comment "Triggers - standalone"
-
-if IIO_TRIGGER
-
-config IIO_BFIN_TMR_TRIGGER
-	tristate "Blackfin TIMER trigger"
-	depends on BLACKFIN
-	select BFIN_GPTIMERS
-	help
-	  Provides support for using a Blackfin timer as IIO triggers.
-	  If unsure, say N (but it's safe to say "Y").
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called iio-trig-bfin-timer.
-
-endif # IIO_TRIGGER
drivers/staging/iio/trigger/Makefile deleted +0 -5
deleted file mode 100644
index 1300a21..0000000
@@ -1,5 +0,0 @@
-#
-# Makefile for triggers not associated with iio-devices
-#
-
-obj-$(CONFIG_IIO_BFIN_TMR_TRIGGER) += iio-trig-bfin-timer.o
drivers/staging/iio/trigger/iio-trig-bfin-timer.c deleted +0 -292

292 lines not on this page · raw message

drivers/staging/iio/trigger/iio-trig-bfin-timer.h deleted +0 -25
deleted file mode 100644
index fb05a2a..0000000
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __IIO_BFIN_TIMER_TRIGGER_H__
-#define __IIO_BFIN_TIMER_TRIGGER_H__
-
-/**
- * struct iio_bfin_timer_trigger_pdata - timer trigger platform data
- * @output_enable: Enable external trigger pulse generation.
- * @active_low: Whether the trigger pulse is active low.
- * @duty_ns: Length of the trigger pulse in nanoseconds.
- *
- * This struct is used to configure the output pulse generation of the blackfin
- * timer trigger. If output_enable is set to true an external trigger signal
- * will generated on the pin corresponding to the timer. This is useful for
- * converters which needs an external signal to start conversion. active_low and
- * duty_ns are used to configure the type of the trigger pulse. If output_enable
- * is set to false no external trigger pulse will be generated and active_low
- * and duty_ns are ignored.
- **/
-struct iio_bfin_timer_trigger_pdata {
-	bool output_enable;
-	bool active_low;
-	unsigned int duty_ns;
-};
-
-#endif
Signature · 1 line
2.7.4
author
#23 lore raw

PATCH 26/28 samples: Remove Blackfin gptimers sample code

In reply to Aaron Wu

Remove Blackfin gptimers sample code

---
 samples/Kconfig                     |  6 ---
 samples/Makefile                    |  2 +-
 samples/blackfin/Makefile           |  1 -
 samples/blackfin/gptimers-example.c | 91 -------------------------------------
 4 files changed, 1 insertion(+), 99 deletions(-)
 delete mode 100644 samples/blackfin/Makefile
 delete mode 100644 samples/blackfin/gptimers-example.c
samples/Kconfig +0 -6
index c332a3b..f524f55 100644
@@ -98,12 +98,6 @@ config SAMPLE_SECCOMP
 	  Build samples of seccomp filters using various methods of
 	  BPF filter construction.
 
-config SAMPLE_BLACKFIN_GPTIMERS
-	tristate "Build blackfin gptimers sample code -- loadable modules only"
-	depends on BLACKFIN && BFIN_GPTIMERS && m
-	help
-	  Build samples of blackfin gptimers sample module.
-
 config SAMPLE_VFIO_MDEV_MTTY
 	tristate "Build VFIO mtty example mediated device sample code -- loadable modules only"
 	depends on VFIO_MDEV_DEVICE && m
samples/Makefile +1 -1
index db54e76..70cf375 100644
@@ -2,5 +2,5 @@
 
 obj-$(CONFIG_SAMPLES)	+= kobject/ kprobes/ trace_events/ livepatch/ \
 			   hw_breakpoint/ kfifo/ kdb/ hidraw/ rpmsg/ seccomp/ \
-			   configfs/ connector/ v4l/ trace_printk/ blackfin/ \
+			   configfs/ connector/ v4l/ trace_printk/ \
 			   vfio-mdev/ statx/
samples/blackfin/Makefile deleted +0 -1
deleted file mode 100644
index 89b86cf..0000000
@@ -1 +0,0 @@
-obj-$(CONFIG_SAMPLE_BLACKFIN_GPTIMERS) += gptimers-example.o
samples/blackfin/gptimers-example.c deleted +0 -91

91 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#24 lore raw

PATCH 27/28 documentation: Remove Blackfin documentation

In reply to Aaron Wu

Remove Blackfin documentation

---
 Documentation/00-INDEX                             |  2 -
 Documentation/admin-guide/kernel-parameters.rst    |  1 -
 Documentation/admin-guide/kernel-parameters.txt    |  2 +-
 Documentation/blackfin/00-INDEX                    |  6 --
 Documentation/blackfin/bfin-gpio-notes.txt         | 71 ----------------------
 Documentation/blackfin/bfin-spi-notes.txt          | 16 -----
 .../driver-api/usb/writing_musb_glue_layer.rst     |  3 -
 .../features/core/BPF-JIT/arch-support.txt         |  1 -
 .../core/generic-idle-thread/arch-support.txt      |  1 -
 .../features/core/jump-labels/arch-support.txt     |  1 -
 .../features/core/tracehook/arch-support.txt       |  1 -
 .../features/debug/KASAN/arch-support.txt          |  1 -
 .../debug/gcov-profile-all/arch-support.txt        |  1 -
 Documentation/features/debug/kgdb/arch-support.txt |  1 -
 .../debug/kprobes-on-ftrace/arch-support.txt       |  1 -
 .../features/debug/kprobes/arch-support.txt        |  1 -
 .../features/debug/kretprobes/arch-support.txt     |  1 -
 .../features/debug/optprobes/arch-support.txt      |  1 -
 .../features/debug/stackprotector/arch-support.txt |  1 -
 .../features/debug/uprobes/arch-support.txt        |  1 -
 .../debug/user-ret-profiler/arch-support.txt       |  1 -
 .../features/io/dma-api-debug/arch-support.txt     |  1 -
 .../features/io/dma-contiguous/arch-support.txt    |  1 -
 .../features/io/sg-chain/arch-support.txt          |  1 -
 .../features/lib/strncasecmp/arch-support.txt      |  1 -
 .../locking/cmpxchg-local/arch-support.txt         |  1 -
 .../features/locking/lockdep/arch-support.txt      |  1 -
 .../locking/queued-rwlocks/arch-support.txt        |  1 -
 .../locking/queued-spinlocks/arch-support.txt      |  1 -
 .../locking/rwsem-optimized/arch-support.txt       |  1 -
 .../features/perf/kprobes-event/arch-support.txt   |  1 -
 .../features/perf/perf-regs/arch-support.txt       |  1 -
 .../features/perf/perf-stackdump/arch-support.txt  |  1 -
 .../sched/membarrier-sync-core/arch-support.txt    |  1 -
 .../features/sched/numa-balancing/arch-support.txt |  1 -
 .../seccomp/seccomp-filter/arch-support.txt        |  1 -
 .../time/arch-tick-broadcast/arch-support.txt      |  1 -
 .../features/time/clockevents/arch-support.txt     |  1 -
 .../time/context-tracking/arch-support.txt         |  1 -
 .../features/time/irq-time-acct/arch-support.txt   |  1 -
 .../time/modern-timekeeping/arch-support.txt       |  1 -
 .../features/time/virt-cpuacct/arch-support.txt    |  1 -
 .../features/vm/ELF-ASLR/arch-support.txt          |  1 -
 .../features/vm/PG_uncached/arch-support.txt       |  1 -
 Documentation/features/vm/THP/arch-support.txt     |  1 -
 Documentation/features/vm/TLB/arch-support.txt     |  1 -
 .../features/vm/huge-vmap/arch-support.txt         |  1 -
 .../features/vm/ioremap_prot/arch-support.txt      |  1 -
 .../features/vm/numa-memblock/arch-support.txt     |  1 -
 .../features/vm/pte_special/arch-support.txt       |  1 -
 50 files changed, 1 insertion(+), 143 deletions(-)
 delete mode 100644 Documentation/blackfin/00-INDEX
 delete mode 100644 Documentation/blackfin/bfin-gpio-notes.txt
 delete mode 100644 Documentation/blackfin/bfin-spi-notes.txt
Documentation/00-INDEX +0 -2
index 7f3a072..2956d7f 100644
@@ -66,8 +66,6 @@ backlight/
 	- directory with info on controlling backlights in flat panel displays
 bcache.txt
 	- Block-layer cache on fast SSDs to improve slow (raid) I/O performance.
-blackfin/
-	- directory with documentation for the Blackfin arch.
 block/
 	- info on the Block I/O (BIO) layer.
 blockdev/
Documentation/admin-guide/kernel-parameters.rst +0 -1
index 7242cbd..b8d0bc0 100644
@@ -89,7 +89,6 @@ parameter is applicable::
 	APM	Advanced Power Management support is enabled.
 	ARM	ARM architecture is enabled.
 	AX25	Appropriate AX.25 support is enabled.
-	BLACKFIN Blackfin architecture is enabled.
 	CLK	Common clock infrastructure is enabled.
 	CMA	Contiguous Memory Area support is enabled.
 	DRM	Direct Rendering Management support is enabled.
Documentation/admin-guide/kernel-parameters.txt +1 -1
index 1d1d53f..0d9b5b7 100644
@@ -1025,7 +1025,7 @@
 			address. The serial port must already be setup
 			and configured. Options are not yet supported.
 
-	earlyprintk=	[X86,SH,BLACKFIN,ARM,M68k,S390]
+	earlyprintk=	[X86,SH,ARM,M68k,S390]
 			earlyprintk=vga
 			earlyprintk=efi
 			earlyprintk=sclp
Documentation/blackfin/00-INDEX deleted +0 -6
deleted file mode 100644
index 265a1ef..0000000
@@ -1,6 +0,0 @@
-00-INDEX
-	- This file
-bfin-gpio-notes.txt
-	- Notes in developing/using bfin-gpio driver.
-bfin-spi-notes.txt
-	- Notes for using bfin spi bus driver.
Documentation/blackfin/bfin-gpio-notes.txt deleted +0 -71

71 lines not on this page · raw message

Documentation/blackfin/bfin-spi-notes.txt deleted +0 -16
deleted file mode 100644
index eae6eaf..0000000
@@ -1,16 +0,0 @@
-SPI Chip Select behavior:
-
-With the Blackfin on-chip SPI peripheral, there is some logic tied to the CPHA
-bit whether the Slave Select Line is controlled by hardware (CPHA=0) or
-controlled by software (CPHA=1). However, the Linux SPI bus driver assumes that
-the Slave Select is always under software control and being asserted during
-the entire SPI transfer. - And not just bits_per_word duration.
-
-In most cases you can utilize SPI MODE_3 instead of MODE_0 to work-around this
-behavior. If your SPI slave device in question requires SPI MODE_0 or MODE_2
-timing, you can utilize the GPIO controlled SPI Slave Select option instead.
-In this case, you should use GPIO based CS for all of your slaves and not just
-the ones using mode 0 or 2 in order to guarantee correct CS toggling behavior.
-
-You can even use the same pin whose peripheral role is a SSEL,
-but use it as a GPIO instead.
Documentation/driver-api/usb/writing_musb_glue_layer.rst +0 -3
index e90e8fa..5bf7152 100644
@@ -718,6 +718,3 @@ http://www.maximintegrated.com/app-notes/index.mvp/id/1822
 
 Texas Instruments USB Configuration Wiki Page:
 http://processors.wiki.ti.com/index.php/Usbgeneralpage
-
-Analog Devices Blackfin MUSB Configuration:
-http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:musb
Documentation/features/core/BPF-JIT/arch-support.txt +0 -1
index 5575d2d..740879c 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/core/generic-idle-thread/arch-support.txt +0 -1
index abb5f27..eff8cc3 100644
@@ -10,7 +10,6 @@
     |         arc: |  ok  |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: |  ok  |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/core/jump-labels/arch-support.txt +0 -1
index dbdaffc..7f90c27 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/core/tracehook/arch-support.txt +0 -1
index dfb638c..9239b54 100644
@@ -10,7 +10,6 @@
     |         arc: |  ok  |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: |  ok  |
     |         c6x: |  ok  |
     |        cris: | TODO |
     |         frv: |  ok  |
Documentation/features/debug/KASAN/arch-support.txt +0 -1
index 3406fae..38f2b5f 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: | TODO |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/debug/gcov-profile-all/arch-support.txt +0 -1
index 830dbe8..d5f6330 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/debug/kgdb/arch-support.txt +0 -1
index 0217bf6..1100345 100644
@@ -10,7 +10,6 @@
     |         arc: |  ok  |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: |  ok  |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/debug/kprobes-on-ftrace/arch-support.txt +0 -1
index 1e84be3c..250248d 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: | TODO |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/debug/kprobes/arch-support.txt +0 -1
index 529f66e..a23d2f3 100644
@@ -10,7 +10,6 @@
     |         arc: |  ok  |
     |         arm: |  ok  |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/debug/kretprobes/arch-support.txt +0 -1
index 4335324..145f65b 100644
@@ -10,7 +10,6 @@
     |         arc: |  ok  |
     |         arm: |  ok  |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/debug/optprobes/arch-support.txt +0 -1
index f559f1b..6a4bb93 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/debug/stackprotector/arch-support.txt +0 -1
index 59a4c9f..38f2ed4 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/debug/uprobes/arch-support.txt +0 -1
index 53ed42b..6f617f7 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/debug/user-ret-profiler/arch-support.txt +0 -1
index 1494439..6b772ed0 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: | TODO |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/io/dma-api-debug/arch-support.txt +0 -1
index 6be9206..1c07e83b 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: |  ok  |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/io/dma-contiguous/arch-support.txt +0 -1
index 0eb08e1..2d86648 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/io/sg-chain/arch-support.txt +0 -1
index 514ad34..62bc1e0 100644
@@ -10,7 +10,6 @@
     |         arc: |  ok  |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/lib/strncasecmp/arch-support.txt +0 -1
index 532c6f0..d71b852 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: | TODO |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/locking/cmpxchg-local/arch-support.txt +0 -1
index f3eec26..4e9f51b 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: | TODO |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/locking/lockdep/arch-support.txt +0 -1
index 9756abc..4632644 100644
@@ -10,7 +10,6 @@
     |         arc: |  ok  |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: |  ok  |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/locking/queued-rwlocks/arch-support.txt +0 -1
index 62f4ee5..1cf417e 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: | TODO |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/locking/queued-spinlocks/arch-support.txt +0 -1
index 321b32f..aea2efa 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: | TODO |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/locking/rwsem-optimized/arch-support.txt +0 -1
index 79bfa4d..7414867 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: | TODO |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/perf/kprobes-event/arch-support.txt +0 -1
index 00f1606..f0f6cec 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/perf/perf-regs/arch-support.txt +0 -1
index 7d516ea..6b305e6 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/perf/perf-stackdump/arch-support.txt +0 -1
index f974b8d..cafa704 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/sched/membarrier-sync-core/arch-support.txt +0 -1
index 2c815a7..ccbfb24 100644
@@ -33,7 +33,6 @@
     |         arc: | TODO |
     |         arm: | TODO |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/sched/numa-balancing/arch-support.txt +0 -1
index 1d3c0f6..54fa603 100644
@@ -10,7 +10,6 @@
     |         arc: |  ..  |
     |         arm: |  ..  |
     |       arm64: |  ..  |
-    |    blackfin: |  ..  |
     |         c6x: |  ..  |
     |        cris: |  ..  |
     |         frv: |  ..  |
Documentation/features/seccomp/seccomp-filter/arch-support.txt +0 -1
index a32d5b2..dc0a901 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/time/arch-tick-broadcast/arch-support.txt +0 -1
index caee8f6..ca3aa5c 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/time/clockevents/arch-support.txt +0 -1
index 1cd87f6..8535d3c 100644
@@ -10,7 +10,6 @@
     |         arc: |  ok  |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: |  ok  |
     |         c6x: |  ok  |
     |        cris: |  ok  |
     |         frv: | TODO |
Documentation/features/time/context-tracking/arch-support.txt +0 -1
index e6d7c7b..cffcf08 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/time/irq-time-acct/arch-support.txt +0 -1
index 15c6071..9b1ab68 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/time/modern-timekeeping/arch-support.txt +0 -1
index baee761..fe4df2f 100644
@@ -10,7 +10,6 @@
     |         arc: |  ok  |
     |         arm: | TODO |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: |  ok  |
     |        cris: | TODO |
     |         frv: |  ok  |
Documentation/features/time/virt-cpuacct/arch-support.txt +0 -1
index 9129530..304b941 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/vm/ELF-ASLR/arch-support.txt +0 -1
index f6829af..3efb2ae 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/vm/PG_uncached/arch-support.txt +0 -1
index 1a09ea9..aadc97f 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: | TODO |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/vm/THP/arch-support.txt +0 -1
index d170e62..76cfb97 100644
@@ -10,7 +10,6 @@
     |         arc: |  ok  |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: |  ..  |
     |         c6x: |  ..  |
     |        cris: |  ..  |
     |         frv: |  ..  |
Documentation/features/vm/TLB/arch-support.txt +0 -1
index abfab40..3a6546a 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: | TODO |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: |  ..  |
     |        cris: |  ..  |
     |         frv: |  ..  |
Documentation/features/vm/huge-vmap/arch-support.txt +0 -1
index f81f09b..fe1e3b2 100644
@@ -10,7 +10,6 @@
     |         arc: | TODO |
     |         arm: | TODO |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/vm/ioremap_prot/arch-support.txt +0 -1
index 0cc3e11..d42dbe0 100644
@@ -10,7 +10,6 @@
     |         arc: |  ok  |
     |         arm: | TODO |
     |       arm64: | TODO |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Documentation/features/vm/numa-memblock/arch-support.txt +0 -1
index 9a3fdac..bb9cd30 100644
@@ -10,7 +10,6 @@
     |         arc: |  ..  |
     |         arm: |  ..  |
     |       arm64: |  ..  |
-    |    blackfin: |  ..  |
     |         c6x: |  ..  |
     |        cris: |  ..  |
     |         frv: |  ..  |
Documentation/features/vm/pte_special/arch-support.txt +0 -1
index dfaa39e..f7b7626 100644
@@ -10,7 +10,6 @@
     |         arc: |  ok  |
     |         arm: |  ok  |
     |       arm64: |  ok  |
-    |    blackfin: | TODO |
     |         c6x: | TODO |
     |        cris: | TODO |
     |         frv: | TODO |
Signature · 1 line
2.7.4
author
#25 lore raw

PATCH 28/28 MAINTAINERS: Remove Blackfin from MAINTAINERS list

In reply to Aaron Wu

Remove Blackfin from MAINTAINERS list

---
 MAINTAINERS | 52 ----------------------------------------------------
 1 file changed, 52 deletions(-)
MAINTAINERS +0 -52
index 4623caf..f5a0857 100644
@@ -841,13 +841,6 @@ F:	sound/soc/codecs/ad7*
 F:	sound/soc/codecs/ssm*
 F:	sound/soc/codecs/sigmadsp.*
 
-ANALOG DEVICES INC ASOC DRIVERS
-L:	[email protected] (moderated for non-subscribers)
-L:	[email protected] (moderated for non-subscribers)
-W:	http://blackfin.uclinux.org/
-S:	Supported
-F:	sound/soc/blackfin/*
-
 ANALOG DEVICES INC DMA DRIVERS
 M:	Lars-Peter Clausen <[email protected]>
 W:	http://ez.analog.com/community/linux-device-drivers
@@ -2629,51 +2622,6 @@ F:	Documentation/filesystems/bfs.txt
 F:	fs/bfs/
 F:	include/uapi/linux/bfs_fs.h
 
-BLACKFIN ARCHITECTURE
-L:	[email protected] (moderated for non-subscribers)
-T:	git git://git.code.sf.net/p/adi-linux/code
-W:	http://blackfin.uclinux.org
-S:	Orphan
-F:	arch/blackfin/
-
-BLACKFIN EMAC DRIVER
-L:	[email protected] (moderated for non-subscribers)
-W:	http://blackfin.uclinux.org
-S:	Orphan
-F:	drivers/net/ethernet/adi/
-
-BLACKFIN MEDIA DRIVER
-L:	[email protected] (moderated for non-subscribers)
-W:	http://blackfin.uclinux.org/
-S:	Orphan
-F:	drivers/media/platform/blackfin/
-F:	drivers/media/i2c/adv7183*
-F:	drivers/media/i2c/vs6624*
-
-BLACKFIN RTC DRIVER
-L:	[email protected] (moderated for non-subscribers)
-W:	http://blackfin.uclinux.org
-S:	Orphan
-F:	drivers/rtc/rtc-bfin.c
-
-BLACKFIN SDH DRIVER
-L:	[email protected] (moderated for non-subscribers)
-W:	http://blackfin.uclinux.org
-S:	Orphan
-F:	drivers/mmc/host/bfin_sdh.c
-
-BLACKFIN SERIAL DRIVER
-L:	[email protected] (moderated for non-subscribers)
-W:	http://blackfin.uclinux.org
-S:	Orphan
-F:	drivers/tty/serial/bfin_uart.c
-
-BLACKFIN WATCHDOG DRIVER
-L:	[email protected] (moderated for non-subscribers)
-W:	http://blackfin.uclinux.org
-S:	Orphan
-F:	drivers/watchdog/bfin_wdt.c
-
 BLINKM RGB LED DRIVER
 M:	Jan-Simon Moeller <[email protected]>
 S:	Maintained
Signature · 1 line
2.7.4