media: Remove Blackfin media support
Subsystems (30)
PATCH 3/28 media: Remove Blackfin media support
Remove Blackfin media support
--- drivers/media/platform/Kconfig | 2 - drivers/media/platform/Makefile | 2 - drivers/media/platform/blackfin/Kconfig | 16 - drivers/media/platform/blackfin/Makefile | 2 - drivers/media/platform/blackfin/bfin_capture.c | 989 ------------------------- drivers/media/platform/blackfin/ppi.c | 361 --------- include/media/blackfin/bfin_capture.h | 39 - include/media/blackfin/ppi.h | 94 --- 8 files changed, 1505 deletions(-) delete mode 100644 drivers/media/platform/blackfin/Kconfig delete mode 100644 drivers/media/platform/blackfin/Makefile delete mode 100644 drivers/media/platform/blackfin/bfin_capture.c delete mode 100644 drivers/media/platform/blackfin/ppi.c delete mode 100644 include/media/blackfin/bfin_capture.h delete mode 100644 include/media/blackfin/ppi.h
drivers/media/platform/Kconfig +0 -2
@@ -31,8 +31,6 @@ source "drivers/media/platform/davinci/Kconfig" source "drivers/media/platform/omap/Kconfig" -source "drivers/media/platform/blackfin/Kconfig" - config VIDEO_SH_VOU tristate "SuperH VOU video output driver" depends on MEDIA_CAMERA_SUPPORT
drivers/media/platform/Makefile +0 -2
@@ -53,8 +53,6 @@ obj-$(CONFIG_VIDEO_TEGRA_HDMI_CEC) += tegra-cec/ obj-y += stm32/ -obj-y += blackfin/ - obj-y += davinci/ obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o
drivers/media/platform/blackfin/Kconfig deleted +0 -16
@@ -1,16 +0,0 @@ -config VIDEO_BLACKFIN_CAPTURE - tristate "Blackfin Video Capture Driver" - depends on VIDEO_V4L2 && BLACKFIN && I2C - depends on HAS_DMA - select VIDEOBUF2_DMA_CONTIG - help - V4L2 bridge driver for Blackfin video capture device. - Choose PPI or EPPI as its interface. - - To compile this driver as a module, choose M here: the - module will be called bfin_capture. - -config VIDEO_BLACKFIN_PPI - tristate - depends on VIDEO_BLACKFIN_CAPTURE - default VIDEO_BLACKFIN_CAPTURE
drivers/media/platform/blackfin/Makefile deleted +0 -2
@@ -1,2 +0,0 @@ -obj-$(CONFIG_VIDEO_BLACKFIN_CAPTURE) += bfin_capture.o -obj-$(CONFIG_VIDEO_BLACKFIN_PPI) += ppi.o
drivers/media/platform/blackfin/bfin_capture.c deleted +0 -989
989 lines not on this page · raw message
drivers/media/platform/blackfin/ppi.c deleted +0 -361
361 lines not on this page · raw message
include/media/blackfin/bfin_capture.h deleted +0 -39
@@ -1,39 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _BFIN_CAPTURE_H_ -#define _BFIN_CAPTURE_H_ - -#include <linux/i2c.h> - -struct v4l2_input ; -struct ppi_info ; - -struct bcap_route { -u32 input; -u32 output; -u32 ppi_control; -}; - -struct bfin_capture_config { -/* card name */ -char *card_name; -/* inputs available at the sub device */ -struct v4l2_input *inputs; -/* number of inputs supported */ -int num_inputs; -/* routing information for each input */ -struct bcap_route *routes; -/* i2c bus adapter no */ -int i2c_adapter_id; -/* i2c subdevice board info */ -struct i2c_board_info board_info; -/* ppi board info */ -const struct ppi_info *ppi_info; -/* ppi control */ -unsigned long ppi_control; -/* ppi interrupt mask */ -u32 int_mask; -/* horizontal blanking pixels */ -int blank_pixels; -}; - -#endif
include/media/blackfin/ppi.h deleted +0 -94
94 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 4/28 tty: Remove Blackfin tty and uart support
Remove Blackfin tty and uart support
--- drivers/tty/Kconfig | 13 - drivers/tty/Makefile | 1 - drivers/tty/bfin_jtag_comm.c | 353 -------- drivers/tty/hvc/Kconfig | 9 - drivers/tty/hvc/Makefile | 1 - drivers/tty/hvc/hvc_bfin_jtag.c | 104 --- drivers/tty/serial/Kconfig | 149 ---- drivers/tty/serial/Makefile | 2 - drivers/tty/serial/bfin_sport_uart.c | 937 -------------------- drivers/tty/serial/bfin_sport_uart.h | 86 -- drivers/tty/serial/bfin_uart.c | 1551 ---------------------------------- include/uapi/linux/serial_core.h | 6 - 12 files changed, 3212 deletions(-) delete mode 100644 drivers/tty/bfin_jtag_comm.c delete mode 100644 drivers/tty/hvc/hvc_bfin_jtag.c delete mode 100644 drivers/tty/serial/bfin_sport_uart.c delete mode 100644 drivers/tty/serial/bfin_sport_uart.h delete mode 100644 drivers/tty/serial/bfin_uart.c
drivers/tty/Kconfig +0 -13
@@ -151,19 +151,6 @@ config LEGACY_PTY_COUNT When not in use, each legacy PTY occupies 12 bytes on 32-bit architectures and 24 bytes on 64-bit architectures. -config BFIN_JTAG_COMM - tristate "Blackfin JTAG Communication" - depends on BLACKFIN - help - Add support for emulating a TTY device over the Blackfin JTAG. - - To compile this driver as a module, choose M here: the - module will be called bfin_jtag_comm. - -config BFIN_JTAG_COMM_CONSOLE - bool "Console on Blackfin JTAG" - depends on BFIN_JTAG_COMM=y - config SERIAL_NONSTANDARD bool "Non-standard serial port support" depends on HAS_IOMEM
drivers/tty/Makefile +0 -1
@@ -20,7 +20,6 @@ obj-$(CONFIG_SERIAL_DEV_BUS) += serdev/ # tty drivers obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o -obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o obj-$(CONFIG_CYCLADES) += cyclades.o obj-$(CONFIG_ISI) += isicom.o obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
drivers/tty/bfin_jtag_comm.c deleted +0 -353
353 lines not on this page · raw message
drivers/tty/hvc/Kconfig +0 -9
@@ -88,15 +88,6 @@ config HVC_DCC driver. This console is used through a JTAG only on ARM. If you don't have a JTAG then you probably don't want this option. -config HVC_BFIN_JTAG - bool "Blackfin JTAG console" - depends on BLACKFIN - select HVC_DRIVER - help - This console uses the Blackfin JTAG to create a console under the - the HVC driver. If you don't have JTAG, then you probably don't - want this option. - config HVCS tristate "IBM Hypervisor Virtual Console Server support" depends on PPC_PSERIES && HVC_CONSOLE
drivers/tty/hvc/Makefile +0 -1
@@ -10,5 +10,4 @@ obj-$(CONFIG_HVC_IRQ) += hvc_irq.o obj-$(CONFIG_HVC_XEN) += hvc_xen.o obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o -obj-$(CONFIG_HVC_BFIN_JTAG) += hvc_bfin_jtag.o obj-$(CONFIG_HVCS) += hvcs.o
drivers/tty/hvc/hvc_bfin_jtag.c deleted +0 -104
104 lines not on this page · raw message
drivers/tty/serial/Kconfig +0 -149
161 lines not on this page · raw message
drivers/tty/serial/Makefile +0 -2
@@ -29,8 +29,6 @@ obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o obj-$(CONFIG_SERIAL_SA1100) += sa1100.o obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o -obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o -obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_MAX310X) += max310x.o
drivers/tty/serial/bfin_sport_uart.c deleted +0 -937
937 lines not on this page · raw message
drivers/tty/serial/bfin_sport_uart.h deleted +0 -86
86 lines not on this page · raw message
drivers/tty/serial/bfin_uart.c deleted +0 -1551
1,305 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.7.4
Part of the diff is not shown here. View the raw message.
PATCH 5/28 rtc: Remove Blackfin RTC support
In reply to Aaron WuRemove Blackfin RTC support
--- drivers/rtc/Kconfig | 10 -- drivers/rtc/Makefile | 1 - drivers/rtc/rtc-bfin.c | 448 ------------------------------------------------- 3 files changed, 459 deletions(-) delete mode 100644 drivers/rtc/rtc-bfin.c
drivers/rtc/Kconfig +0 -10
@@ -1434,16 +1434,6 @@ config RTC_DRV_AU1XXX This driver can also be built as a module. If so, the module will be called rtc-au1xxx. -config RTC_DRV_BFIN - tristate "Blackfin On-Chip RTC" - depends on BLACKFIN && !BF561 - help - If you say yes here you will get support for the - Blackfin On-Chip Real Time Clock. - - This driver can also be built as a module. If so, the module - will be called rtc-bfin. - config RTC_DRV_RS5C313 tristate "Ricoh RS5C313" depends on SH_LANDISK
drivers/rtc/Makefile +0 -1
@@ -36,7 +36,6 @@ obj-$(CONFIG_RTC_DRV_ASM9260) += rtc-asm9260.o obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o obj-$(CONFIG_RTC_DRV_AU1XXX) += rtc-au1xxx.o -obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o obj-$(CONFIG_RTC_DRV_BRCMSTB) += rtc-brcmstb-waketimer.o obj-$(CONFIG_RTC_DRV_BQ32K) += rtc-bq32k.o obj-$(CONFIG_RTC_DRV_BQ4802) += rtc-bq4802.o
drivers/rtc/rtc-bfin.c deleted +0 -448
448 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 6/28 mmc: Remove Blackfin SD host support
In reply to Aaron WuRemove Blackfin SD host support
--- drivers/mmc/host/Kconfig | 19 -- drivers/mmc/host/Makefile | 1 - drivers/mmc/host/bfin_sdh.c | 679 -------------------------------------------- 3 files changed, 699 deletions(-) delete mode 100644 drivers/mmc/host/bfin_sdh.c
drivers/mmc/host/Kconfig +0 -19
@@ -646,25 +646,6 @@ config MMC_VIA_SDMMC If unsure, say N. -config SDH_BFIN - tristate "Blackfin Secure Digital Host support" - depends on (BF54x && !BF544) || (BF51x && !BF512) - help - If you say yes here you will get support for the Blackfin on-chip - Secure Digital Host interface. This includes support for MMC and - SD cards. - - To compile this driver as a module, choose M here: the - module will be called bfin_sdh. - - If unsure, say N. - -config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND - bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround" - depends on SDH_BFIN - help - If you say yes here SD-Cards may work on the EZkit. - config MMC_CAVIUM_OCTEON tristate "Cavium OCTEON SD/MMC Card Interface support" depends on CAVIUM_OCTEON_SOC
drivers/mmc/host/Makefile +0 -1
@@ -43,7 +43,6 @@ obj-$(CONFIG_MMC_SDHI_SYS_DMAC) += renesas_sdhi_sys_dmac.o obj-$(CONFIG_MMC_SDHI_INTERNAL_DMAC) += renesas_sdhi_internal_dmac.o obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o -obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o octeon-mmc-objs := cavium.o cavium-octeon.o obj-$(CONFIG_MMC_CAVIUM_OCTEON) += octeon-mmc.o thunderx-mmc-objs := cavium.o cavium-thunderx.o
drivers/mmc/host/bfin_sdh.c deleted +0 -679
679 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 7/28 watchdog: Remove Blackfin watchdog support
In reply to Aaron WuRemove Blackfin watchdog support
--- drivers/watchdog/Kconfig | 13 -- drivers/watchdog/Makefile | 3 - drivers/watchdog/bfin_wdt.c | 476 -------------------------------------------- 3 files changed, 492 deletions(-) delete mode 100644 drivers/watchdog/bfin_wdt.c
drivers/watchdog/Kconfig +0 -13
@@ -815,19 +815,6 @@ config SPRD_WATCHDOG Say Y here to include watchdog timer supported by Spreadtrum system. -# BLACKFIN Architecture - -config BFIN_WDT - tristate "Blackfin On-Chip Watchdog Timer" - depends on BLACKFIN - ---help--- - If you say yes here you will get support for the Blackfin On-Chip - Watchdog Timer. If you have one of these processors and wish to - have watchdog support enabled, say Y, otherwise say N. - - To compile this driver as a module, choose M here: the - module will be called bfin_wdt. - # CRIS Architecture # FRV Architecture
drivers/watchdog/Makefile +0 -3
@@ -91,9 +91,6 @@ obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o obj-$(CONFIG_RTD119X_WATCHDOG) += rtd119x_wdt.o obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o -# BLACKFIN Architecture -obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o - # CRIS Architecture # FRV Architecture
drivers/watchdog/bfin_wdt.c deleted +0 -476
476 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 8/28 Asoc: Remove Blackfin ASOC support
In reply to Aaron WuRemove Blackfin ASOC support
--- sound/soc/Kconfig | 1 - sound/soc/Makefile | 1 - sound/soc/blackfin/Kconfig | 205 ------ sound/soc/blackfin/Makefile | 40 -- sound/soc/blackfin/bf5xx-ac97-pcm.c | 480 -------------- sound/soc/blackfin/bf5xx-ac97.c | 388 ----------- sound/soc/blackfin/bf5xx-ac97.h | 57 -- sound/soc/blackfin/bf5xx-ad1836.c | 109 --- sound/soc/blackfin/bf5xx-ad193x.c | 131 ---- sound/soc/blackfin/bf5xx-ad1980.c | 109 --- sound/soc/blackfin/bf5xx-ad73311.c | 212 ------ sound/soc/blackfin/bf5xx-i2s-pcm.c | 373 ----------- sound/soc/blackfin/bf5xx-i2s-pcm.h | 17 - sound/soc/blackfin/bf5xx-i2s.c | 391 ----------- sound/soc/blackfin/bf5xx-sport.c | 1102 ------------------------------- sound/soc/blackfin/bf5xx-sport.h | 174 ----- sound/soc/blackfin/bf5xx-ssm2602.c | 126 ---- sound/soc/blackfin/bf6xx-i2s.c | 239 ------- sound/soc/blackfin/bf6xx-sport.c | 425 ------------ sound/soc/blackfin/bf6xx-sport.h | 82 --- sound/soc/blackfin/bfin-eval-adau1373.c | 173 ----- sound/soc/blackfin/bfin-eval-adau1701.c | 113 ---- sound/soc/blackfin/bfin-eval-adau1x61.c | 142 ---- sound/soc/blackfin/bfin-eval-adau1x81.c | 129 ---- sound/soc/blackfin/bfin-eval-adav80x.c | 145 ---- 25 files changed, 5364 deletions(-) delete mode 100644 sound/soc/blackfin/Kconfig delete mode 100644 sound/soc/blackfin/Makefile delete mode 100644 sound/soc/blackfin/bf5xx-ac97-pcm.c delete mode 100644 sound/soc/blackfin/bf5xx-ac97.c delete mode 100644 sound/soc/blackfin/bf5xx-ac97.h delete mode 100644 sound/soc/blackfin/bf5xx-ad1836.c delete mode 100644 sound/soc/blackfin/bf5xx-ad193x.c delete mode 100644 sound/soc/blackfin/bf5xx-ad1980.c delete mode 100644 sound/soc/blackfin/bf5xx-ad73311.c delete mode 100644 sound/soc/blackfin/bf5xx-i2s-pcm.c delete mode 100644 sound/soc/blackfin/bf5xx-i2s-pcm.h delete mode 100644 sound/soc/blackfin/bf5xx-i2s.c delete mode 100644 sound/soc/blackfin/bf5xx-sport.c delete mode 100644 sound/soc/blackfin/bf5xx-sport.h delete mode 100644 sound/soc/blackfin/bf5xx-ssm2602.c delete mode 100644 sound/soc/blackfin/bf6xx-i2s.c delete mode 100644 sound/soc/blackfin/bf6xx-sport.c delete mode 100644 sound/soc/blackfin/bf6xx-sport.h delete mode 100644 sound/soc/blackfin/bfin-eval-adau1373.c delete mode 100644 sound/soc/blackfin/bfin-eval-adau1701.c delete mode 100644 sound/soc/blackfin/bfin-eval-adau1x61.c delete mode 100644 sound/soc/blackfin/bfin-eval-adau1x81.c delete mode 100644 sound/soc/blackfin/bfin-eval-adav80x.c
sound/soc/Kconfig +0 -1
@@ -45,7 +45,6 @@ source "sound/soc/amd/Kconfig" source "sound/soc/atmel/Kconfig" source "sound/soc/au1x/Kconfig" source "sound/soc/bcm/Kconfig" -source "sound/soc/blackfin/Kconfig" source "sound/soc/cirrus/Kconfig" source "sound/soc/davinci/Kconfig" source "sound/soc/dwc/Kconfig"
sound/soc/Makefile +0 -1
@@ -29,7 +29,6 @@ obj-$(CONFIG_SND_SOC) += amd/ obj-$(CONFIG_SND_SOC) += atmel/ obj-$(CONFIG_SND_SOC) += au1x/ obj-$(CONFIG_SND_SOC) += bcm/ -obj-$(CONFIG_SND_SOC) += blackfin/ obj-$(CONFIG_SND_SOC) += cirrus/ obj-$(CONFIG_SND_SOC) += davinci/ obj-$(CONFIG_SND_SOC) += dwc/
sound/soc/blackfin/Kconfig deleted +0 -205
205 lines not on this page · raw message
sound/soc/blackfin/Makefile deleted +0 -40
@@ -1,40 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# Blackfin Platform Support -snd-bf5xx-ac97-objs := bf5xx-ac97-pcm.o -snd-bf5xx-i2s-objs := bf5xx-i2s-pcm.o -snd-soc-bf5xx-sport-objs := bf5xx-sport.o -snd-soc-bf6xx-sport-objs := bf6xx-sport.o -snd-soc-bf5xx-ac97-objs := bf5xx-ac97.o -snd-soc-bf5xx-i2s-objs := bf5xx-i2s.o -snd-soc-bf6xx-i2s-objs := bf6xx-i2s.o - -obj-$(CONFIG_SND_BF5XX_AC97) += snd-bf5xx-ac97.o -obj-$(CONFIG_SND_BF5XX_I2S) += snd-bf5xx-i2s.o -obj-$(CONFIG_SND_BF5XX_SOC_SPORT) += snd-soc-bf5xx-sport.o -obj-$(CONFIG_SND_BF6XX_SOC_SPORT) += snd-soc-bf6xx-sport.o -obj-$(CONFIG_SND_BF5XX_SOC_AC97) += snd-soc-bf5xx-ac97.o -obj-$(CONFIG_SND_BF5XX_SOC_I2S) += snd-soc-bf5xx-i2s.o -obj-$(CONFIG_SND_BF6XX_SOC_I2S) += snd-soc-bf6xx-i2s.o - -# Blackfin Machine Support -snd-ad1836-objs := bf5xx-ad1836.o -snd-ad1980-objs := bf5xx-ad1980.o -snd-ssm2602-objs := bf5xx-ssm2602.o -snd-ad73311-objs := bf5xx-ad73311.o -snd-ad193x-objs := bf5xx-ad193x.o -snd-soc-bfin-eval-adau1373-objs := bfin-eval-adau1373.o -snd-soc-bfin-eval-adau1x61-objs := bfin-eval-adau1x61.o -snd-soc-bfin-eval-adau1x81-objs := bfin-eval-adau1x81.o -snd-soc-bfin-eval-adau1701-objs := bfin-eval-adau1701.o -snd-soc-bfin-eval-adav80x-objs := bfin-eval-adav80x.o - -obj-$(CONFIG_SND_BF5XX_SOC_AD1836) += snd-ad1836.o -obj-$(CONFIG_SND_BF5XX_SOC_AD1980) += snd-ad1980.o -obj-$(CONFIG_SND_BF5XX_SOC_SSM2602) += snd-ssm2602.o -obj-$(CONFIG_SND_BF5XX_SOC_AD73311) += snd-ad73311.o -obj-$(CONFIG_SND_BF5XX_SOC_AD193X) += snd-ad193x.o -obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) += snd-soc-bfin-eval-adau1373.o -obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) += snd-soc-bfin-eval-adau1x61.o -obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X81) += snd-soc-bfin-eval-adau1x81.o -obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) += snd-soc-bfin-eval-adau1701.o -obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) += snd-soc-bfin-eval-adav80x.o
sound/soc/blackfin/bf5xx-ac97-pcm.c deleted +0 -480
480 lines not on this page · raw message
sound/soc/blackfin/bf5xx-ac97.c deleted +0 -388
388 lines not on this page · raw message
sound/soc/blackfin/bf5xx-ac97.h deleted +0 -57
57 lines not on this page · raw message
sound/soc/blackfin/bf5xx-ad1836.c deleted +0 -109
109 lines not on this page · raw message
sound/soc/blackfin/bf5xx-ad193x.c deleted +0 -131
131 lines not on this page · raw message
sound/soc/blackfin/bf5xx-ad1980.c deleted +0 -109
109 lines not on this page · raw message
sound/soc/blackfin/bf5xx-ad73311.c deleted +0 -212
212 lines not on this page · raw message
sound/soc/blackfin/bf5xx-i2s-pcm.c deleted +0 -373
373 lines not on this page · raw message
sound/soc/blackfin/bf5xx-i2s-pcm.h deleted +0 -17
@@ -1,17 +0,0 @@ -/* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ - -#ifndef _BF5XX_TDM_PCM_H -#define _BF5XX_TDM_PCM_H - -#define BFIN_TDM_DAI_MAX_SLOTS 8 - -struct bf5xx_i2s_pcm_data { -unsigned int map[BFIN_TDM_DAI_MAX_SLOTS ]; -bool tdm_mode; -}; - -#endif
sound/soc/blackfin/bf5xx-i2s.c deleted +0 -391
391 lines not on this page · raw message
sound/soc/blackfin/bf5xx-sport.c deleted +0 -1102
474 lines not on this page · raw message
sound/soc/blackfin/bf5xx-sport.h deleted +0 -174
174 lines not on this page · raw message
sound/soc/blackfin/bf5xx-ssm2602.c deleted +0 -126
126 lines not on this page · raw message
sound/soc/blackfin/bf6xx-i2s.c deleted +0 -239
239 lines not on this page · raw message
sound/soc/blackfin/bf6xx-sport.c deleted +0 -425
425 lines not on this page · raw message
sound/soc/blackfin/bf6xx-sport.h deleted +0 -82
82 lines not on this page · raw message
sound/soc/blackfin/bfin-eval-adau1373.c deleted +0 -173
173 lines not on this page · raw message
sound/soc/blackfin/bfin-eval-adau1701.c deleted +0 -113
113 lines not on this page · raw message
sound/soc/blackfin/bfin-eval-adau1x61.c deleted +0 -142
142 lines not on this page · raw message
sound/soc/blackfin/bfin-eval-adau1x81.c deleted +0 -129
129 lines not on this page · raw message
sound/soc/blackfin/bfin-eval-adav80x.c deleted +0 -145
145 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.7.4
Part of the diff is not shown here. View the raw message.
PATCH 9/28 input: Remove Blackfin input support
In reply to Aaron WuRemove Blackfin input support
--- drivers/input/keyboard/Kconfig | 9 - drivers/input/keyboard/Makefile | 1 - drivers/input/keyboard/bf54x-keys.c | 396 ------------------------------ drivers/input/misc/Kconfig | 9 - drivers/input/misc/Makefile | 1 - drivers/input/misc/bfin_rotary.c | 294 ---------------------- include/linux/platform_data/bfin_rotary.h | 117 --------- 7 files changed, 827 deletions(-) delete mode 100644 drivers/input/keyboard/bf54x-keys.c delete mode 100644 drivers/input/misc/bfin_rotary.c delete mode 100644 include/linux/platform_data/bfin_rotary.h
drivers/input/keyboard/Kconfig +0 -9
@@ -157,15 +157,6 @@ config KEYBOARD_QT2160 This driver can also be built as a module. If so, the module will be called qt2160. -config KEYBOARD_BFIN - tristate "Blackfin BF54x keypad support" - depends on (BF54x && !BF544) - help - Say Y here if you want to use the BF54x keypad. - - To compile this driver as a module, choose M here: the - module will be called bf54x-keys. - config KEYBOARD_CLPS711X tristate "CLPS711X Keypad support" depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST)
drivers/input/keyboard/Makefile +0 -1
@@ -13,7 +13,6 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BCM) += bcm-keypad.o -obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o
drivers/input/keyboard/bf54x-keys.c deleted +0 -396
396 lines not on this page · raw message
drivers/input/misc/Kconfig +0 -9
@@ -655,15 +655,6 @@ config INPUT_DM355EVM To compile this driver as a module, choose M here: the module will be called dm355evm_keys. -config INPUT_BFIN_ROTARY - tristate "Blackfin Rotary support" - depends on BF54x || BF52x - help - Say Y here if you want to use the Blackfin Rotary. - - To compile this driver as a module, choose M here: the - module will be called bfin-rotary. - config INPUT_WM831X_ON tristate "WM831X ON pin" depends on MFD_WM831X
drivers/input/misc/Makefile +0 -1
@@ -19,7 +19,6 @@ obj-$(CONFIG_INPUT_ARIZONA_HAPTICS) += arizona-haptics.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH) += atmel_captouch.o -obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o obj-$(CONFIG_INPUT_BMA150) += bma150.o obj-$(CONFIG_INPUT_CM109) += cm109.o obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o
drivers/input/misc/bfin_rotary.c deleted +0 -294
294 lines not on this page · raw message
include/linux/platform_data/bfin_rotary.h deleted +0 -117
117 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 10/28 i2c: Remove Blackfin I2C bus support
In reply to Aaron WuRemove Blackfin I2C bus support
--- drivers/i2c/busses/Kconfig | 18 - drivers/i2c/busses/Makefile | 1 - drivers/i2c/busses/i2c-bfin-twi.c | 737 -------------------------------------- 3 files changed, 756 deletions(-) delete mode 100644 drivers/i2c/busses/i2c-bfin-twi.c
drivers/i2c/busses/Kconfig +0 -18
@@ -445,24 +445,6 @@ config I2C_BRCMSTB If you do not need I2C interface, say N. -config I2C_BLACKFIN_TWI - tristate "Blackfin TWI I2C support" - depends on BLACKFIN - depends on !BF561 && !BF531 && !BF532 && !BF533 - help - This is the I2C bus driver for Blackfin on-chip TWI interface. - - This driver can also be built as a module. If so, the module - will be called i2c-bfin-twi. - -config I2C_BLACKFIN_TWI_CLK_KHZ - int "Blackfin TWI I2C clock (kHz)" - depends on I2C_BLACKFIN_TWI - range 21 400 - default 50 - help - The unit of the TWI clock is kHz. - config I2C_CADENCE tristate "Cadence I2C Controller" depends on ARCH_ZYNQ || ARM64 || XTENSA
drivers/i2c/busses/Makefile +0 -1
@@ -38,7 +38,6 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o obj-$(CONFIG_I2C_BCM_IPROC) += i2c-bcm-iproc.o -obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
drivers/i2c/busses/i2c-bfin-twi.c deleted +0 -737
737 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 11/28 misc: Remove Blackfin DSP echo support
In reply to Aaron WuRemove Blackfin DSP echo support
--- drivers/misc/echo/echo.c | 73 ------------------------------------------------ drivers/misc/echo/fir.h | 50 --------------------------------- 2 files changed, 123 deletions(-)
drivers/misc/echo/echo.c +0 -73
@@ -115,78 +115,6 @@/* adapting coeffs using the traditional stochastic descent (N)LMS algorithm */ -#ifdef __bfin__ -static inline void lms_adapt_bg (struct oslec_state *ec,int clean,int shift) -{ -int i; -int offset1; -int offset2; -int factor; -int exp; -int16_t *phist; -int n; - -if (shift >0 ) - factor = clean << shift; -else - factor = clean >> -shift; - -/* Update the FIR taps */ - - offset2 = ec->curr_pos; - offset1 = ec->taps - offset2; - phist = &ec->fir_state_bg.history[offset2]; - -/* st: and en: help us locate the assembler in echo.s */ - -/* asm("st:"); */ - n = ec->taps; -for (i =0 ; i < n; i++) { - exp = *phist++ * factor; - ec->fir_taps16[1 ][i] += (int16_t ) ((exp + (1 <<14 )) >>15 ); - } -/* asm("en:"); */ - -/* Note the asm for the inner loop above generated by Blackfin gcc -4.1.1 is pretty good (note even parallel instructions used): - -R0 = W [P0++] (X); -R0 *= R2; -R0 = R0 + R3 (NS) || -R1 = W [P1] (X) || -nop; -R0 >>>= 15; -R0 = R0 + R1; -W [P1++] = R0; - -A block based update algorithm would be much faster but the -above can't be improved on much. Every instruction saved in -the loop above is 2 MIPs/ch! The for loop above is where the -Blackfin spends most of it's time - about 17 MIPs/ch measured -with speedtest.c with 256 taps (32ms). Write-back and -Write-through cache gave about the same performance. -*/ -} - -/* -IDEAS for further optimisation of lms_adapt_bg(): - -1/ The rounding is quite costly. Could we keep as 32 bit coeffs -then make filter pluck the MS 16-bits of the coeffs when filtering? -However this would lower potential optimisation of filter, as I -think the dual-MAC architecture requires packed 16 bit coeffs. - -2/ Block based update would be more efficient, as per comments above, -could use dual MAC architecture. - -3/ Look for same sample Blackfin LMS code, see if we can get dual-MAC -packing. - -4/ Execute the whole e/c in a block of say 20ms rather than sample -by sample. Processing a few samples every ms is inefficient. -*/ - -#else static inline void lms_adapt_bg (struct oslec_state *ec,int clean,int shift) {int i;
@@ -215,7 +143,6 @@ static inline void lms_adapt_bg(struct oslec_state *ec, int clean, int shift) ec->fir_taps16[1 ][i] += (int16_t ) ((exp + (1 <<14 )) >>15 ); } } -#endif static inline int top_bit (unsigned int bits) {
drivers/misc/echo/fir.h +0 -50
84 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 12/28 video: Remove Blackfin video support
In reply to Aaron WuRemove Blackfin video support
--- drivers/video/console/Kconfig | 2 +- drivers/video/fbdev/Kconfig | 83 -- drivers/video/fbdev/Makefile | 5 - drivers/video/fbdev/bf537-lq035.c | 891 -------------------- drivers/video/fbdev/bf54x-lq043fb.c | 764 ----------------- drivers/video/fbdev/bfin-lq035q1-fb.c | 864 -------------------- drivers/video/fbdev/bfin-t350mcqb-fb.c | 669 --------------- drivers/video/fbdev/bfin_adv7393fb.c | 828 ------------------- drivers/video/fbdev/bfin_adv7393fb.h | 319 -------- drivers/video/logo/Kconfig | 10 - drivers/video/logo/Makefile | 2 - drivers/video/logo/logo.c | 8 - drivers/video/logo/logo_blackfin_clut224.ppm | 1127 -------------------------- drivers/video/logo/logo_blackfin_vga16.ppm | 1127 -------------------------- include/linux/fb.h | 3 +- include/linux/linux_logo.h | 2 - 16 files changed, 2 insertions(+), 6702 deletions(-) delete mode 100644 drivers/video/fbdev/bf537-lq035.c delete mode 100644 drivers/video/fbdev/bf54x-lq043fb.c delete mode 100644 drivers/video/fbdev/bfin-lq035q1-fb.c delete mode 100644 drivers/video/fbdev/bfin-t350mcqb-fb.c delete mode 100644 drivers/video/fbdev/bfin_adv7393fb.c delete mode 100644 drivers/video/fbdev/bfin_adv7393fb.h delete mode 100644 drivers/video/logo/logo_blackfin_clut224.ppm delete mode 100644 drivers/video/logo/logo_blackfin_vga16.ppm
drivers/video/console/Kconfig +1 -1
@@ -7,7 +7,7 @@ menu "Console display driver support" config VGA_CONSOLE bool "VGA text console" if EXPERT || !X86 depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !FRV && \ - !SUPERH && !BLACKFIN && !AVR32 && !MN10300 && !CRIS && \ + !SUPERH && !AVR32 && !MN10300 && !CRIS && \ (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \ !ARM64 && !ARC && !MICROBLAZE && !OPENRISC default y
drivers/video/fbdev/Kconfig +0 -83
95 lines not on this page · raw message
drivers/video/fbdev/Makefile +0 -5
@@ -136,11 +136,6 @@ obj-$(CONFIG_FB_VESA) += vesafb.o obj-$(CONFIG_FB_EFI) += efifb.o obj-$(CONFIG_FB_VGA16) += vga16fb.o obj-$(CONFIG_FB_OF) += offb.o -obj-$(CONFIG_FB_BF537_LQ035) += bf537-lq035.o -obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o -obj-$(CONFIG_FB_BFIN_LQ035Q1) += bfin-lq035q1-fb.o -obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o -obj-$(CONFIG_FB_BFIN_7393) += bfin_adv7393fb.o obj-$(CONFIG_FB_MX3) += mx3fb.o obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o obj-$(CONFIG_FB_MXS) += mxsfb.o
drivers/video/fbdev/bf537-lq035.c deleted +0 -891
891 lines not on this page · raw message
drivers/video/fbdev/bf54x-lq043fb.c deleted +0 -764
764 lines not on this page · raw message
drivers/video/fbdev/bfin-lq035q1-fb.c deleted +0 -864
864 lines not on this page · raw message
drivers/video/fbdev/bfin-t350mcqb-fb.c deleted +0 -669
367 lines not on this page · raw message
drivers/video/fbdev/bfin_adv7393fb.c deleted +0 -828
828 lines not on this page · raw message
drivers/video/fbdev/bfin_adv7393fb.h deleted +0 -319
319 lines not on this page · raw message
drivers/video/logo/logo_blackfin_clut224.ppm deleted +0 -1127
1,127 lines not on this page · raw message
drivers/video/logo/logo_blackfin_vga16.ppm deleted +0 -1127
1,127 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.7.4
Part of the diff is not shown here. View the raw message.
PATCH 13/28 cpufreq: Remove Blackfin CPU frequency support
In reply to Aaron WuRemove Blackfin CPU frequency support
--- drivers/cpufreq/Makefile | 1 - drivers/cpufreq/blackfin-cpufreq.c | 217 --- drivers/cpufreq/cpufreq.c | 2612 ------------------------------------ 3 files changed, 2830 deletions(-) delete mode 100644 drivers/cpufreq/blackfin-cpufreq.c delete mode 100644 drivers/cpufreq/cpufreq.c
drivers/cpufreq/Makefile +0 -1
@@ -100,7 +100,6 @@ obj-$(CONFIG_POWERNV_CPUFREQ) += powernv-cpufreq.o ################################################################################## # Other platform drivers -obj-$(CONFIG_BFIN_CPU_FREQ) += blackfin-cpufreq.o obj-$(CONFIG_BMIPS_CPUFREQ) += bmips-cpufreq.o obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
drivers/cpufreq/blackfin-cpufreq.c deleted +0 -217
217 lines not on this page · raw message
drivers/cpufreq/cpufreq.c deleted +0 -2612
2,612 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 14/28 mtd: Remove Blackfin MTD support
In reply to Aaron WuRemove Blackfin MTD support
--- drivers/mtd/maps/Kconfig | 10 - drivers/mtd/maps/Makefile | 1 - drivers/mtd/maps/bfin-async-flash.c | 196 -------- drivers/mtd/nand/Kconfig | 32 -- drivers/mtd/nand/Makefile | 1 - drivers/mtd/nand/bf5xx_nand.c | 862 ------------------------------------ 6 files changed, 1102 deletions(-) delete mode 100644 drivers/mtd/maps/bfin-async-flash.c delete mode 100644 drivers/mtd/nand/bf5xx_nand.c
drivers/mtd/maps/Kconfig +0 -10
@@ -334,16 +334,6 @@ config MTD_PCMCIA_ANONYMOUS If unsure, say N. -config MTD_BFIN_ASYNC - tristate "Blackfin BF533-STAMP Flash Chip Support" - depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS - default y - help - Map driver which allows for simultaneous utilization of - ethernet and CFI parallel flash. - - If compiled as a module, it will be called bfin-async-flash. - config MTD_GPIO_ADDR tristate "GPIO-assisted Flash Chip Support" depends on GPIOLIB || COMPILE_TEST
drivers/mtd/maps/Makefile +0 -1
@@ -42,7 +42,6 @@ obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o -obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o obj-$(CONFIG_MTD_VMU) += vmu-flash.o obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
drivers/mtd/maps/bfin-async-flash.c deleted +0 -196
196 lines not on this page · raw message
drivers/mtd/nand/Kconfig +0 -32
@@ -116,38 +116,6 @@ config MTD_NAND_AU1550 This enables the driver for the NAND flash controller on the AMD/Alchemy 1550 SOC. -config MTD_NAND_BF5XX - tristate "Blackfin on-chip NAND Flash Controller driver" - depends on BF54x || BF52x - help - This enables the Blackfin on-chip NAND flash controller - - No board specific support is done by this driver, each board - must advertise a platform_device for the driver to attach. - - This driver can also be built as a module. If so, the module - will be called bf5xx-nand. - -config MTD_NAND_BF5XX_HWECC - bool "BF5XX NAND Hardware ECC" - default y - depends on MTD_NAND_BF5XX - help - Enable the use of the BF5XX's internal ECC generator when - using NAND. - -config MTD_NAND_BF5XX_BOOTROM_ECC - bool "Use Blackfin BootROM ECC Layout" - default n - depends on MTD_NAND_BF5XX_HWECC - help - If you wish to modify NAND pages and allow the Blackfin on-chip - BootROM to boot from them, say Y here. This is only necessary - if you are booting U-Boot out of NAND and you wish to update - U-Boot from Linux' userspace. Otherwise, you should say N here. - - If unsure, say N. - config MTD_NAND_S3C2410 tristate "NAND Flash support for Samsung S3C SoCs" depends on ARCH_S3C24XX || ARCH_S3C64XX
drivers/mtd/nand/Makefile +0 -1
@@ -14,7 +14,6 @@ obj-$(CONFIG_MTD_NAND_DENALI) += denali.o obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o -obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o obj-$(CONFIG_MTD_NAND_TANGO) += tango_nand.o obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o
drivers/mtd/nand/bf5xx_nand.c deleted +0 -862
862 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 15/28 spi: Remove Blackfin SPI bus support
In reply to Aaron WuRemove Blackfin SPI bus support
--- drivers/spi/Kconfig | 19 - drivers/spi/Makefile | 2 - drivers/spi/spi-adi-v3.c | 984 ---------------------------- drivers/spi/spi-bfin-sport.c | 919 -------------------------- drivers/spi/spi-bfin5xx.c | 1462 ------------------------------------------ 5 files changed, 3386 deletions(-) delete mode 100644 drivers/spi/spi-adi-v3.c delete mode 100644 drivers/spi/spi-bfin-sport.c delete mode 100644 drivers/spi/spi-bfin5xx.c
drivers/spi/Kconfig +0 -19
@@ -115,25 +115,6 @@ config SPI_BCM2835AUX "universal SPI master", and the regular SPI controller. This driver is for the universal/auxiliary SPI controller. -config SPI_BFIN5XX - tristate "SPI controller driver for ADI Blackfin5xx" - depends on BLACKFIN && !BF60x - help - This is the SPI controller master driver for Blackfin 5xx processor. - -config SPI_ADI_V3 - tristate "SPI controller v3 for ADI" - depends on BF60x - help - This is the SPI controller v3 master driver - found on Blackfin 60x processor. - -config SPI_BFIN_SPORT - tristate "SPI bus via Blackfin SPORT" - depends on BLACKFIN - help - Enable support for a SPI bus via the Blackfin SPORT peripheral. - config SPI_BCM53XX tristate "Broadcom BCM53xx SPI controller" depends on ARCH_BCM_5301X
drivers/spi/Makefile +0 -2
@@ -24,9 +24,7 @@ obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o obj-$(CONFIG_SPI_BCM_QSPI) += spi-iproc-qspi.o spi-brcmstb-qspi.o spi-bcm-qspi.o -obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o -obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o
drivers/spi/spi-adi-v3.c deleted +0 -984
984 lines not on this page · raw message
drivers/spi/spi-bfin-sport.c deleted +0 -919
919 lines not on this page · raw message
drivers/spi/spi-bfin5xx.c deleted +0 -1462
1,063 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.7.4
Part of the diff is not shown here. View the raw message.
PATCH 16/28 irda: Remove Blackfin IRDA support
In reply to Aaron WuRemove Blackfin IRDA support
--- drivers/staging/irda/drivers/Kconfig | 45 -- drivers/staging/irda/drivers/Makefile | 1 - drivers/staging/irda/drivers/bfin_sir.c | 819 -------------------------------- drivers/staging/irda/drivers/bfin_sir.h | 93 ---- 4 files changed, 958 deletions(-) delete mode 100644 drivers/staging/irda/drivers/bfin_sir.c delete mode 100644 drivers/staging/irda/drivers/bfin_sir.h
drivers/staging/irda/drivers/Kconfig +0 -45
@@ -17,51 +17,6 @@ config IRTTY_SIR If unsure, say Y. -config BFIN_SIR - tristate "Blackfin SIR on UART" - depends on BLACKFIN && IRDA - default n - help - Say Y here if your want to enable SIR function on Blackfin UART - devices. - - To activate this driver you can start irattach like: - "irattach irda0 -s" - - Saying M, it will be built as a module named bfin_sir. - - Note that you need to turn off one of the serial drivers for SIR - to use that UART. - -config BFIN_SIR0 - bool "Blackfin SIR on UART0" - depends on BFIN_SIR && !SERIAL_BFIN_UART0 - -config BFIN_SIR1 - bool "Blackfin SIR on UART1" - depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561) - -config BFIN_SIR2 - bool "Blackfin SIR on UART2" - depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539) - -config BFIN_SIR3 - bool "Blackfin SIR on UART3" - depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x) - -choice - prompt "SIR Mode" - depends on BFIN_SIR - default SIR_BFIN_DMA - -config SIR_BFIN_DMA - bool "DMA mode" - depends on !DMA_UNCACHED_NONE - -config SIR_BFIN_PIO - bool "PIO mode" -endchoice - config SH_SIR tristate "SuperH SIR on UART" depends on IRDA && SUPERH && \
drivers/staging/irda/drivers/Makefile +0 -1
@@ -23,7 +23,6 @@ obj-$(CONFIG_MCS_FIR) += mcs7780.o obj-$(CONFIG_AU1000_FIR) += au1k_ir.o # SIR drivers obj-$(CONFIG_IRTTY_SIR) += irtty-sir.o sir-dev.o -obj-$(CONFIG_BFIN_SIR) += bfin_sir.o obj-$(CONFIG_SH_SIR) += sh_sir.o # dongle drivers for SIR drivers obj-$(CONFIG_ESI_DONGLE) += esi-sir.o
drivers/staging/irda/drivers/bfin_sir.c deleted +0 -819
819 lines not on this page · raw message
drivers/staging/irda/drivers/bfin_sir.h deleted +0 -93
93 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 17/28 usb: Remove Blackfin USB support
In reply to Aaron WuRemove Blackfin USB support
--- drivers/usb/gadget/function/f_uac1_legacy.c | 2 - drivers/usb/gadget/function/u_uac1_legacy.c | 2 - drivers/usb/gadget/function/u_uac1_legacy.h | 2 - drivers/usb/gadget/legacy/audio.c | 2 - drivers/usb/host/isp1362.h | 45 -- drivers/usb/musb/Kconfig | 12 +- drivers/usb/musb/Makefile | 1 - drivers/usb/musb/blackfin.c | 623 ---------------------------- drivers/usb/musb/blackfin.h | 81 ---- drivers/usb/musb/musb_core.c | 7 +- drivers/usb/musb/musb_core.h | 42 -- drivers/usb/musb/musb_debugfs.c | 2 - drivers/usb/musb/musb_dma.h | 11 - drivers/usb/musb/musb_gadget.c | 32 -- drivers/usb/musb/musb_regs.h | 182 -------- drivers/usb/musb/musbhsdma.c | 5 - drivers/usb/musb/musbhsdma.h | 90 ---- drivers/usb/serial/ftdi_sio_ids.h | 8 - include/linux/usb/musb.h | 7 - 19 files changed, 3 insertions(+), 1153 deletions(-) delete mode 100644 drivers/usb/musb/blackfin.c delete mode 100644 drivers/usb/musb/blackfin.h
drivers/usb/gadget/function/f_uac1_legacy.c +0 -2
@@ -4,8 +4,6 @@* * Copyright (C) 2008 Bryan Wu <[email protected]> * Copyright (C) 2008 Analog Devices, Inc -* -* Enter bugs at http://blackfin.uclinux.org/ */ #include <linux/slab.h>
drivers/usb/gadget/function/u_uac1_legacy.c +0 -2
@@ -4,8 +4,6 @@* * Copyright (C) 2008 Bryan Wu <[email protected]> * Copyright (C) 2008 Analog Devices, Inc -* -* Enter bugs at http://blackfin.uclinux.org/ */ #include <linux/kernel.h>
drivers/usb/gadget/function/u_uac1_legacy.h +0 -2
@@ -4,8 +4,6 @@* * Copyright (C) 2008 Bryan Wu <[email protected]> * Copyright (C) 2008 Analog Devices, Inc -* -* Enter bugs at http://blackfin.uclinux.org/ */ #ifndef __U_UAC1_LEGACY_H
drivers/usb/gadget/legacy/audio.c +0 -2
@@ -4,8 +4,6 @@* * Copyright (C) 2008 Bryan Wu <[email protected]> * Copyright (C) 2008 Analog Devices, Inc -* -* Enter bugs at http://blackfin.uclinux.org/ */ /* #define VERBOSE_DEBUG */
drivers/usb/host/isp1362.h +0 -45
57 lines not on this page · raw message
drivers/usb/musb/Kconfig +2 -10
@@ -18,9 +18,6 @@ config USB_MUSB_HDRC Texas Instruments families using this IP include DaVinci (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010. - Analog Devices parts using this IP include Blackfin BF54x, - BF525 and BF527. - Allwinner SoCs using this IP include A10, A13, A20, ... If you do not know what this is, please say N.
@@ -87,7 +84,7 @@ config USB_MUSB_DA8XX config USB_MUSB_TUSB6010 tristate "TUSB6010" depends on HAS_IOMEM - depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN + depends on (ARCH_OMAP2PLUS || COMPILE_TEST) depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules config USB_MUSB_OMAP2PLUS
@@ -107,11 +104,6 @@ config USB_MUSB_DSPS depends on ARCH_OMAP2PLUS || COMPILE_TEST depends on OF_IRQ -config USB_MUSB_BLACKFIN - tristate "Blackfin" - depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523) - depends on NOP_USB_XCEIV - config USB_MUSB_UX500 tristate "Ux500 platforms" depends on ARCH_U8500 || COMPILE_TEST
@@ -149,7 +141,7 @@ config USB_UX500_DMA config USB_INVENTRA_DMA bool 'Inventra' - depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN + depends on USB_MUSB_OMAP2PLUS help Enable DMA transfers using Mentor's engine.
drivers/usb/musb/Makefile +0 -1
@@ -21,7 +21,6 @@ obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o -obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o obj-$(CONFIG_USB_MUSB_UX500) += ux500.o obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o
drivers/usb/musb/blackfin.c deleted +0 -623
623 lines not on this page · raw message
drivers/usb/musb/blackfin.h deleted +0 -81
81 lines not on this page · raw message
drivers/usb/musb/musb_core.c +1 -6
@@ -126,7 +126,6 @@ EXPORT_SYMBOL_GPL(musb_get_mode);/*-------------------------------------------------------------------------*/ -#ifndef CONFIG_BLACKFIN static int musb_ulpi_read (struct usb_phy *phy,u32 reg) {void __iomem *addr = phy->io_priv;
@@ -208,10 +207,6 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg)return ret; } -#else -#define musb_ulpi_read NULL -#define musb_ulpi_write NULL -#endif static struct usb_phy_io_ops musb_ulpi_access = { .read = musb_ulpi_read,
@@ -2171,7 +2166,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)* - initializes musb->xceiv, usually by otg_get_phy() * - stops powering VBUS * -* There are various transceiver configurations. Blackfin, +* There are various transceiver configurations. * DaVinci, TUSB60x0, and others integrate them. OMAP3 uses * external/discrete ones in various flavors (twl4030 family, * isp1504, non-OTG, etc) mostly hooking up through ULPI.
drivers/usb/musb/musb_core.h +0 -42
60 lines not on this page · raw message
drivers/usb/musb/musb_debugfs.c +0 -2
@@ -70,7 +70,6 @@ static const struct musb_register_map musb_regmap[] = { { "DMA_CNTLch7", 0x274, 16 }, { "DMA_ADDRch7", 0x278, 32 }, { "DMA_COUNTch7", 0x27C, 32 }, -#ifndef CONFIG_BLACKFIN { "ConfigData", MUSB_CONFIGDATA,8 }, { "BabbleCtl", MUSB_BABBLE_CTL,8 }, { "TxFIFOsz", MUSB_TXFIFOSZ, 8 },
@@ -79,7 +78,6 @@ static const struct musb_register_map musb_regmap[] = { { "RxFIFOadd", MUSB_RXFIFOADD, 16 }, { "EPInfo", MUSB_EPINFO, 8 }, { "RAMInfo", MUSB_RAMINFO, 8 }, -#endif { } /* Terminating Entry */ };
drivers/usb/musb/musb_dma.h +0 -11
@@ -80,17 +80,6 @@ struct musb_hw_ep;#define is_cppi_enabled (musb) 0#endif -/* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1 -* Only allow DMA mode 1 to be used when the USB will actually generate the -* interrupts we expect. -*/ -#ifdef CONFIG_BLACKFIN -# undef USE_MODE1 -# if !ANOMALY_05000456 -# define USE_MODE1 -# endif -#endif -/* * DMA channel status ... updated by the dma controller driver whenever that * status changes, and protected by the overall controller spinlock.
drivers/usb/musb/musb_gadget.c +0 -32
@@ -1680,39 +1680,7 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)return 0 ; } -#ifdef CONFIG_BLACKFIN -static struct usb_ep *musb_match_ep (struct usb_gadget *g, -struct usb_endpoint_descriptor *desc, -struct usb_ss_ep_comp_descriptor *ep_comp) -{ -struct usb_ep *ep =NULL ; - -switch (usb_endpoint_type (desc)) { -case USB_ENDPOINT_XFER_ISOC : -case USB_ENDPOINT_XFER_BULK : -if (usb_endpoint_dir_in (desc)) - ep =gadget_find_ep_by_name (g,"ep5in" ); -else - ep =gadget_find_ep_by_name (g,"ep6out" ); -break ; -case USB_ENDPOINT_XFER_INT : -if (usb_endpoint_dir_in (desc)) - ep =gadget_find_ep_by_name (g,"ep1in" ); -else - ep =gadget_find_ep_by_name (g,"ep2out" ); -break ; -default : -break ; - } - -if (ep &&usb_gadget_ep_match_desc (g, ep, desc, ep_comp)) -return ep; - -return NULL ; -} -#else #define musb_match_ep NULL -#endif static int musb_gadget_start (struct usb_gadget *g,struct usb_gadget_driver *driver);
drivers/usb/musb/musb_regs.h +0 -182
192 lines not on this page · raw message
drivers/usb/musb/musbhsdma.c +0 -5
@@ -235,11 +235,6 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) int_hsdma =musb_readb (mbase,MUSB_HSDMA_INTR ); -#ifdef CONFIG_BLACKFIN -/* Clear DMA interrupt flags */ -musb_writeb (mbase,MUSB_HSDMA_INTR , int_hsdma); -#endif -if (!int_hsdma) {musb_dbg (musb,"spurious DMA irq" );
drivers/usb/musb/musbhsdma.h +0 -64
76 lines not on this page · raw message
include/linux/usb/musb.h +0 -7
@@ -89,13 +89,6 @@ struct musb_hdrc_config {u8 ram_bits;/* ram address size */ struct musb_hdrc_eps_bits *eps_bits__deprecated ; -#ifdef CONFIG_BLACKFIN -/* A GPIO controlling VRSEL in Blackfin */ -unsigned int gpio_vrsel; -unsigned int gpio_vrsel_active; -/* musb CLKIN in Blackfin in MHZ */ -unsigned char clkin; -#endif u32 maximum_speed; };
Signature · 1 line
2.7.4
PATCH 18/28 crypto: Remove Blackfin crypto support
In reply to Aaron WuRemove Blackfin crypto support
--- crypto/testmgr.c | 6 - crypto/testmgr.h | 88 ------ drivers/crypto/Kconfig | 7 - drivers/crypto/Makefile | 1 - drivers/crypto/bfin_crc.c | 743 ---------------------------------------------- drivers/crypto/bfin_crc.h | 124 -------- 6 files changed, 969 deletions(-) delete mode 100644 drivers/crypto/bfin_crc.c delete mode 100644 drivers/crypto/bfin_crc.h
crypto/testmgr.c +0 -6
@@ -3070,12 +3070,6 @@ static const struct alg_test_desc alg_test_descs[] = { .hash = __VECS(ghash_tv_template) } }, { - .alg = "hmac(crc32)", - .test = alg_test_hash, - .suite = { - .hash = __VECS(bfin_crc_tv_template) - } - }, { .alg = "hmac(md5)", .test = alg_test_hash, .suite = {
crypto/testmgr.h +0 -88
94 lines not on this page · raw message
drivers/crypto/Kconfig +0 -7
@@ -464,13 +464,6 @@ if CRYPTO_DEV_UX500 source "drivers/crypto/ux500/Kconfig" endif # if CRYPTO_DEV_UX500 -config CRYPTO_DEV_BFIN_CRC - tristate "Support for Blackfin CRC hardware" - depends on BF60x - help - Newer Blackfin processors have CRC hardware. Select this if you - want to use the Blackfin CRC module. - config CRYPTO_DEV_ATMEL_AUTHENC tristate "Support for Atmel IPSEC/SSL hw accelerator" depends on HAS_DMA
drivers/crypto/Makefile +0 -1
@@ -3,7 +3,6 @@ obj-$(CONFIG_CRYPTO_DEV_ATMEL_AES) += atmel-aes.o obj-$(CONFIG_CRYPTO_DEV_ATMEL_SHA) += atmel-sha.o obj-$(CONFIG_CRYPTO_DEV_ATMEL_TDES) += atmel-tdes.o obj-$(CONFIG_CRYPTO_DEV_ATMEL_ECC) += atmel-ecc.o -obj-$(CONFIG_CRYPTO_DEV_BFIN_CRC) += bfin_crc.o obj-$(CONFIG_CRYPTO_DEV_CAVIUM_ZIP) += cavium/ obj-$(CONFIG_CRYPTO_DEV_CCP) += ccp/ obj-$(CONFIG_CRYPTO_DEV_CHELSIO) += chelsio/
drivers/crypto/bfin_crc.c deleted +0 -743
743 lines not on this page · raw message
drivers/crypto/bfin_crc.h deleted +0 -124
124 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 19/28 ata: Remove Blackfin PATA support
In reply to Aaron WuRemove Blackfin PATA support
--- drivers/ata/Kconfig | 9 - drivers/ata/Makefile | 1 - drivers/ata/pata_bf54x.c | 1703 ---------------------------------------------- 3 files changed, 1713 deletions(-) delete mode 100644 drivers/ata/pata_bf54x.c
drivers/ata/Kconfig +0 -9
@@ -549,15 +549,6 @@ config PATA_ATP867X If unsure, say N. -config PATA_BF54X - tristate "Blackfin 54x ATAPI support" - depends on BF542 || BF548 || BF549 - help - This option enables support for the built-in ATAPI controller on - Blackfin 54x family chips. - - If unsure, say N. - config PATA_BK3710 tristate "Palmchip BK3710 PATA support" depends on ARCH_DAVINCI
drivers/ata/Makefile +0 -1
@@ -53,7 +53,6 @@ obj-$(CONFIG_PATA_AMD) += pata_amd.o obj-$(CONFIG_PATA_ARTOP) += pata_artop.o obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o -obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o obj-$(CONFIG_PATA_BK3710) += pata_bk3710.o obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o
drivers/ata/pata_bf54x.c deleted +0 -1703
1,703 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 20/28 pwm: Remove Blackfin PWM support
In reply to Aaron WuRemove Blackfin PWM support
--- drivers/pwm/Kconfig | 9 --- drivers/pwm/Makefile | 1 - drivers/pwm/pwm-bfin.c | 157 ------------------------------------------------- 3 files changed, 167 deletions(-) delete mode 100644 drivers/pwm/pwm-bfin.c
drivers/pwm/Kconfig +0 -9
@@ -113,15 +113,6 @@ config PWM_BERLIN To compile this driver as a module, choose M here: the module will be called pwm-berlin. -config PWM_BFIN - tristate "Blackfin PWM support" - depends on BFIN_GPTIMERS - help - Generic PWM framework driver for Blackfin. - - To compile this driver as a module, choose M here: the module - will be called pwm-bfin. - config PWM_BRCMSTB tristate "Broadcom STB PWM support" depends on ARCH_BRCMSTB || BMIPS_GENERIC
drivers/pwm/Makefile +0 -1
@@ -9,7 +9,6 @@ obj-$(CONFIG_PWM_BCM_IPROC) += pwm-bcm-iproc.o obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o obj-$(CONFIG_PWM_BERLIN) += pwm-berlin.o -obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o obj-$(CONFIG_PWM_BRCMSTB) += pwm-brcmstb.o obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o obj-$(CONFIG_PWM_CRC) += pwm-crc.o
drivers/pwm/pwm-bfin.c deleted +0 -157
157 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 21/28 pcmcia: Remove Blackfin PCMCIA support
In reply to Aaron WuRemove Blackfin PCMCIA support
--- drivers/pcmcia/Kconfig | 7 - drivers/pcmcia/Makefile | 1 - drivers/pcmcia/bfin_cf_pcmcia.c | 316 ---------------------------------------- 3 files changed, 324 deletions(-) delete mode 100644 drivers/pcmcia/bfin_cf_pcmcia.c
drivers/pcmcia/Kconfig +0 -7
@@ -266,13 +266,6 @@ config OMAP_CF Say Y here to support the CompactFlash controller on OMAP. Note that this doesn't support "True IDE" mode. -config BFIN_CFPCMCIA - tristate "Blackfin CompactFlash PCMCIA Driver" - depends on PCMCIA && BLACKFIN - help - Say Y here to support the CompactFlash PCMCIA driver for Blackfin. - - config AT91_CF tristate "AT91 CompactFlash Controller" depends on PCI
drivers/pcmcia/Makefile +0 -1
@@ -34,7 +34,6 @@ obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o obj-$(CONFIG_OMAP_CF) += omap_cf.o -obj-$(CONFIG_BFIN_CFPCMCIA) += bfin_cf_pcmcia.o obj-$(CONFIG_AT91_CF) += at91_cf.o obj-$(CONFIG_ELECTRA_CF) += electra_cf.o obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD) += db1xxx_ss.o
drivers/pcmcia/bfin_cf_pcmcia.c deleted +0 -316
316 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 22/28 can: Remove Blackfin CAN bus support
In reply to Aaron WuRemove Blackfin CAN bus support
--- drivers/net/can/Kconfig | 9 - drivers/net/can/Makefile | 1 - drivers/net/can/bfin_can.c | 784 --------------------------------------------- 3 files changed, 794 deletions(-) delete mode 100644 drivers/net/can/bfin_can.c
drivers/net/can/Kconfig +0 -9
@@ -88,15 +88,6 @@ config CAN_AT91 This is a driver for the SoC CAN controller in Atmel's AT91SAM9263 and AT91SAM9X5 processors. -config CAN_BFIN - depends on BF534 || BF536 || BF537 || BF538 || BF539 || BF54x - tristate "Analog Devices Blackfin on-chip CAN" - ---help--- - Driver for the Analog Devices Blackfin on-chip CAN controllers - - To compile this driver as a module, choose M here: the - module will be called bfin_can. - config CAN_FLEXCAN tristate "Support for Freescale FLEXCAN based chips" depends on ARM || PPC
drivers/net/can/Makefile +0 -1
@@ -19,7 +19,6 @@ obj-y += usb/ obj-y += softing/ obj-$(CONFIG_CAN_AT91) += at91_can.o -obj-$(CONFIG_CAN_BFIN) += bfin_can.o obj-$(CONFIG_CAN_CC770) += cc770/ obj-$(CONFIG_CAN_C_CAN) += c_can/ obj-$(CONFIG_CAN_FLEXCAN) += flexcan.o
drivers/net/can/bfin_can.c deleted +0 -784
784 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 23/28 char: Remove Blackfin OTP support
In reply to Aaron WuRemove Blackfin OTP support
--- drivers/char/Kconfig | 28 ------ drivers/char/Makefile | 1 - drivers/char/bfin-otp.c | 237 ------------------------------------------------ 3 files changed, 266 deletions(-) delete mode 100644 drivers/char/bfin-otp.c
drivers/char/Kconfig +0 -28
@@ -66,34 +66,6 @@ config TTY_PRINTK If unsure, say N. -config BFIN_OTP - tristate "Blackfin On-Chip OTP Memory Support" - depends on BLACKFIN && (BF51x || BF52x || BF54x) - default y - help - If you say Y here, you will get support for a character device - interface into the One Time Programmable memory pages that are - stored on the Blackfin processor. This will not get you access - to the secure memory pages however. You will need to write your - own secure code and reader for that. - - To compile this driver as a module, choose M here: the module - will be called bfin-otp. - - If unsure, it is safe to say Y. - -config BFIN_OTP_WRITE_ENABLE - bool "Enable writing support of OTP pages" - depends on BFIN_OTP - default n - help - If you say Y here, you will enable support for writing of the - OTP pages. This is dangerous by nature as you can only program - the pages once, so only enable this option when you actually - need it so as to not inadvertently clobber data. - - If unsure, say N. - config PRINTER tristate "Parallel printer support" depends on PARPORT
drivers/char/Makefile +0 -1
@@ -14,7 +14,6 @@ obj-$(CONFIG_MSPEC) += mspec.o obj-$(CONFIG_UV_MMTIMER) += uv_mmtimer.o obj-$(CONFIG_IBM_BSR) += bsr.o obj-$(CONFIG_SGI_MBCS) += mbcs.o -obj-$(CONFIG_BFIN_OTP) += bfin-otp.o obj-$(CONFIG_PRINTER) += lp.o
drivers/char/bfin-otp.c deleted +0 -237
237 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 24/28 pinctrl: Remove Blackfin pinctrl support
In reply to Aaron WuRemove Blackfin pinctrl support
--- drivers/pinctrl/Kconfig | 19 - drivers/pinctrl/Makefile | 3 - drivers/pinctrl/pinctrl-adi2-bf54x.c | 588 ------------------ drivers/pinctrl/pinctrl-adi2-bf60x.c | 517 ---------------- drivers/pinctrl/pinctrl-adi2.c | 1114 ---------------------------------- drivers/pinctrl/pinctrl-adi2.h | 75 --- 6 files changed, 2316 deletions(-) delete mode 100644 drivers/pinctrl/pinctrl-adi2-bf54x.c delete mode 100644 drivers/pinctrl/pinctrl-adi2-bf60x.c delete mode 100644 drivers/pinctrl/pinctrl-adi2.c delete mode 100644 drivers/pinctrl/pinctrl-adi2.h
drivers/pinctrl/Kconfig +0 -19
@@ -30,17 +30,6 @@ config DEBUG_PINCTRL help Say Y here to add some extra checks and diagnostics to PINCTRL calls. -config PINCTRL_ADI2 - bool "ADI pin controller driver" - depends on (BF54x || BF60x) - depends on !GPIO_ADI - select PINMUX - select IRQ_DOMAIN - help - This is the pin controller and gpio driver for ADI BF54x, BF60x and - future processors. This option is selected automatically when specific - machine and arch are selected to build. - config PINCTRL_ARTPEC6 bool "Axis ARTPEC-6 pin controller driver" depends on MACH_ARTPEC6
@@ -77,14 +66,6 @@ config PINCTRL_AXP209 selected. Say yes to enable pinctrl and GPIO support for the AXP209 PMIC -config PINCTRL_BF54x - def_bool y if BF54x - select PINCTRL_ADI2 - -config PINCTRL_BF60x - def_bool y if BF60x - select PINCTRL_ADI2 - config PINCTRL_AT91 bool "AT91 pinctrl driver" depends on OF
drivers/pinctrl/Makefile +0 -3
@@ -8,12 +8,9 @@ obj-$(CONFIG_PINMUX) += pinmux.o obj-$(CONFIG_PINCONF) += pinconf.o obj-$(CONFIG_OF) += devicetree.o obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o -obj-$(CONFIG_PINCTRL_ADI2) += pinctrl-adi2.o obj-$(CONFIG_PINCTRL_ARTPEC6) += pinctrl-artpec6.o obj-$(CONFIG_PINCTRL_AS3722) += pinctrl-as3722.o obj-$(CONFIG_PINCTRL_AXP209) += pinctrl-axp209.o -obj-$(CONFIG_PINCTRL_BF54x) += pinctrl-adi2-bf54x.o -obj-$(CONFIG_PINCTRL_BF60x) += pinctrl-adi2-bf60x.o obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o obj-$(CONFIG_PINCTRL_AMD) += pinctrl-amd.o
drivers/pinctrl/pinctrl-adi2-bf54x.c deleted +0 -588
588 lines not on this page · raw message
drivers/pinctrl/pinctrl-adi2-bf60x.c deleted +0 -517
517 lines not on this page · raw message
drivers/pinctrl/pinctrl-adi2.c deleted +0 -1114
1,114 lines not on this page · raw message
drivers/pinctrl/pinctrl-adi2.h deleted +0 -75
75 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 25/28 staging: Remove Blackfin iio trigger timer support
In reply to Aaron WuRemove Blackfin iio trigger timer support
--- drivers/staging/iio/Kconfig | 1 - drivers/staging/iio/Makefile | 1 - drivers/staging/iio/trigger/Kconfig | 19 -- drivers/staging/iio/trigger/Makefile | 5 - drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 292 ---------------------- drivers/staging/iio/trigger/iio-trig-bfin-timer.h | 25 -- 6 files changed, 343 deletions(-) delete mode 100644 drivers/staging/iio/trigger/Kconfig delete mode 100644 drivers/staging/iio/trigger/Makefile delete mode 100644 drivers/staging/iio/trigger/iio-trig-bfin-timer.c delete mode 100644 drivers/staging/iio/trigger/iio-trig-bfin-timer.h
drivers/staging/iio/Kconfig +0 -1
@@ -14,6 +14,5 @@ source "drivers/staging/iio/impedance-analyzer/Kconfig" source "drivers/staging/iio/light/Kconfig" source "drivers/staging/iio/meter/Kconfig" source "drivers/staging/iio/resolver/Kconfig" -source "drivers/staging/iio/trigger/Kconfig" endmenu
drivers/staging/iio/Makefile +0 -1
@@ -13,4 +13,3 @@ obj-y += impedance-analyzer/ obj-y += light/ obj-y += meter/ obj-y += resolver/ -obj-y += trigger/
drivers/staging/iio/trigger/Kconfig deleted +0 -19
@@ -1,19 +0,0 @@ - # -# Industrial I/O standalone triggers -# -comment "Triggers - standalone" - -if IIO_TRIGGER - -config IIO_BFIN_TMR_TRIGGER - tristate "Blackfin TIMER trigger" - depends on BLACKFIN - select BFIN_GPTIMERS - help - Provides support for using a Blackfin timer as IIO triggers. - If unsure, say N (but it's safe to say "Y"). - - To compile this driver as a module, choose M here: the - module will be called iio-trig-bfin-timer. - -endif # IIO_TRIGGER
drivers/staging/iio/trigger/Makefile deleted +0 -5
@@ -1,5 +0,0 @@ -# -# Makefile for triggers not associated with iio-devices -# - -obj-$(CONFIG_IIO_BFIN_TMR_TRIGGER) += iio-trig-bfin-timer.o
drivers/staging/iio/trigger/iio-trig-bfin-timer.c deleted +0 -292
292 lines not on this page · raw message
drivers/staging/iio/trigger/iio-trig-bfin-timer.h deleted +0 -25
@@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __IIO_BFIN_TIMER_TRIGGER_H__ -#define __IIO_BFIN_TIMER_TRIGGER_H__ - -/** -* struct iio_bfin_timer_trigger_pdata - timer trigger platform data -* @output_enable: Enable external trigger pulse generation. -* @active_low: Whether the trigger pulse is active low. -* @duty_ns: Length of the trigger pulse in nanoseconds. -* -* This struct is used to configure the output pulse generation of the blackfin -* timer trigger. If output_enable is set to true an external trigger signal -* will generated on the pin corresponding to the timer. This is useful for -* converters which needs an external signal to start conversion. active_low and -* duty_ns are used to configure the type of the trigger pulse. If output_enable -* is set to false no external trigger pulse will be generated and active_low -* and duty_ns are ignored. -**/ -struct iio_bfin_timer_trigger_pdata { -bool output_enable; -bool active_low; -unsigned int duty_ns; -}; - -#endif
Signature · 1 line
2.7.4
PATCH 26/28 samples: Remove Blackfin gptimers sample code
In reply to Aaron WuRemove Blackfin gptimers sample code
--- samples/Kconfig | 6 --- samples/Makefile | 2 +- samples/blackfin/Makefile | 1 - samples/blackfin/gptimers-example.c | 91 ------------------------------------- 4 files changed, 1 insertion(+), 99 deletions(-) delete mode 100644 samples/blackfin/Makefile delete mode 100644 samples/blackfin/gptimers-example.c
samples/Kconfig +0 -6
@@ -98,12 +98,6 @@ config SAMPLE_SECCOMP Build samples of seccomp filters using various methods of BPF filter construction. -config SAMPLE_BLACKFIN_GPTIMERS - tristate "Build blackfin gptimers sample code -- loadable modules only" - depends on BLACKFIN && BFIN_GPTIMERS && m - help - Build samples of blackfin gptimers sample module. - config SAMPLE_VFIO_MDEV_MTTY tristate "Build VFIO mtty example mediated device sample code -- loadable modules only" depends on VFIO_MDEV_DEVICE && m
samples/Makefile +1 -1
@@ -2,5 +2,5 @@ obj-$(CONFIG_SAMPLES) += kobject/ kprobes/ trace_events/ livepatch/ \ hw_breakpoint/ kfifo/ kdb/ hidraw/ rpmsg/ seccomp/ \ - configfs/ connector/ v4l/ trace_printk/ blackfin/ \ + configfs/ connector/ v4l/ trace_printk/ \ vfio-mdev/ statx/
samples/blackfin/Makefile deleted +0 -1
@@ -1 +0,0 @@ -obj-$(CONFIG_SAMPLE_BLACKFIN_GPTIMERS) += gptimers-example.o
samples/blackfin/gptimers-example.c deleted +0 -91
91 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 27/28 documentation: Remove Blackfin documentation
In reply to Aaron WuRemove Blackfin documentation
--- Documentation/00-INDEX | 2 - Documentation/admin-guide/kernel-parameters.rst | 1 - Documentation/admin-guide/kernel-parameters.txt | 2 +- Documentation/blackfin/00-INDEX | 6 -- Documentation/blackfin/bfin-gpio-notes.txt | 71 ---------------------- Documentation/blackfin/bfin-spi-notes.txt | 16 ----- .../driver-api/usb/writing_musb_glue_layer.rst | 3 - .../features/core/BPF-JIT/arch-support.txt | 1 - .../core/generic-idle-thread/arch-support.txt | 1 - .../features/core/jump-labels/arch-support.txt | 1 - .../features/core/tracehook/arch-support.txt | 1 - .../features/debug/KASAN/arch-support.txt | 1 - .../debug/gcov-profile-all/arch-support.txt | 1 - Documentation/features/debug/kgdb/arch-support.txt | 1 - .../debug/kprobes-on-ftrace/arch-support.txt | 1 - .../features/debug/kprobes/arch-support.txt | 1 - .../features/debug/kretprobes/arch-support.txt | 1 - .../features/debug/optprobes/arch-support.txt | 1 - .../features/debug/stackprotector/arch-support.txt | 1 - .../features/debug/uprobes/arch-support.txt | 1 - .../debug/user-ret-profiler/arch-support.txt | 1 - .../features/io/dma-api-debug/arch-support.txt | 1 - .../features/io/dma-contiguous/arch-support.txt | 1 - .../features/io/sg-chain/arch-support.txt | 1 - .../features/lib/strncasecmp/arch-support.txt | 1 - .../locking/cmpxchg-local/arch-support.txt | 1 - .../features/locking/lockdep/arch-support.txt | 1 - .../locking/queued-rwlocks/arch-support.txt | 1 - .../locking/queued-spinlocks/arch-support.txt | 1 - .../locking/rwsem-optimized/arch-support.txt | 1 - .../features/perf/kprobes-event/arch-support.txt | 1 - .../features/perf/perf-regs/arch-support.txt | 1 - .../features/perf/perf-stackdump/arch-support.txt | 1 - .../sched/membarrier-sync-core/arch-support.txt | 1 - .../features/sched/numa-balancing/arch-support.txt | 1 - .../seccomp/seccomp-filter/arch-support.txt | 1 - .../time/arch-tick-broadcast/arch-support.txt | 1 - .../features/time/clockevents/arch-support.txt | 1 - .../time/context-tracking/arch-support.txt | 1 - .../features/time/irq-time-acct/arch-support.txt | 1 - .../time/modern-timekeeping/arch-support.txt | 1 - .../features/time/virt-cpuacct/arch-support.txt | 1 - .../features/vm/ELF-ASLR/arch-support.txt | 1 - .../features/vm/PG_uncached/arch-support.txt | 1 - Documentation/features/vm/THP/arch-support.txt | 1 - Documentation/features/vm/TLB/arch-support.txt | 1 - .../features/vm/huge-vmap/arch-support.txt | 1 - .../features/vm/ioremap_prot/arch-support.txt | 1 - .../features/vm/numa-memblock/arch-support.txt | 1 - .../features/vm/pte_special/arch-support.txt | 1 - 50 files changed, 1 insertion(+), 143 deletions(-) delete mode 100644 Documentation/blackfin/00-INDEX delete mode 100644 Documentation/blackfin/bfin-gpio-notes.txt delete mode 100644 Documentation/blackfin/bfin-spi-notes.txt
Documentation/00-INDEX +0 -2
@@ -66,8 +66,6 @@ backlight/ - directory with info on controlling backlights in flat panel displays bcache.txt - Block-layer cache on fast SSDs to improve slow (raid) I/O performance. -blackfin/ - - directory with documentation for the Blackfin arch. block/ - info on the Block I/O (BIO) layer. blockdev/
Documentation/admin-guide/kernel-parameters.rst +0 -1
@@ -89,7 +89,6 @@ parameter is applicable:: APM Advanced Power Management support is enabled. ARM ARM architecture is enabled. AX25 Appropriate AX.25 support is enabled. - BLACKFIN Blackfin architecture is enabled. CLK Common clock infrastructure is enabled. CMA Contiguous Memory Area support is enabled. DRM Direct Rendering Management support is enabled.
Documentation/admin-guide/kernel-parameters.txt +1 -1
@@ -1025,7 +1025,7 @@ address. The serial port must already be setup and configured. Options are not yet supported. - earlyprintk= [X86,SH,BLACKFIN,ARM,M68k,S390] + earlyprintk= [X86,SH,ARM,M68k,S390] earlyprintk=vga earlyprintk=efi earlyprintk=sclp
Documentation/blackfin/00-INDEX deleted +0 -6
@@ -1,6 +0,0 @@ -00-INDEX - - This file -bfin-gpio-notes.txt - - Notes in developing/using bfin-gpio driver. -bfin-spi-notes.txt - - Notes for using bfin spi bus driver.
Documentation/blackfin/bfin-gpio-notes.txt deleted +0 -71
71 lines not on this page · raw message
Documentation/blackfin/bfin-spi-notes.txt deleted +0 -16
@@ -1,16 +0,0 @@ -SPI Chip Select behavior: - -With the Blackfin on-chip SPI peripheral, there is some logic tied to the CPHA -bit whether the Slave Select Line is controlled by hardware (CPHA=0) or -controlled by software (CPHA=1). However, the Linux SPI bus driver assumes that -the Slave Select is always under software control and being asserted during -the entire SPI transfer. - And not just bits_per_word duration. - -In most cases you can utilize SPI MODE_3 instead of MODE_0 to work-around this -behavior. If your SPI slave device in question requires SPI MODE_0 or MODE_2 -timing, you can utilize the GPIO controlled SPI Slave Select option instead. -In this case, you should use GPIO based CS for all of your slaves and not just -the ones using mode 0 or 2 in order to guarantee correct CS toggling behavior. - -You can even use the same pin whose peripheral role is a SSEL, -but use it as a GPIO instead.
Documentation/driver-api/usb/writing_musb_glue_layer.rst +0 -3
@@ -718,6 +718,3 @@ http://www.maximintegrated.com/app-notes/index.mvp/id/1822 Texas Instruments USB Configuration Wiki Page: http://processors.wiki.ti.com/index.php/Usbgeneralpage - -Analog Devices Blackfin MUSB Configuration: -http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:musb
Documentation/features/core/BPF-JIT/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/core/generic-idle-thread/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | ok | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/core/jump-labels/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/core/tracehook/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | ok | | c6x: | ok | | cris: | TODO | | frv: | ok |
Documentation/features/debug/KASAN/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/debug/gcov-profile-all/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/debug/kgdb/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | ok | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/debug/kprobes-on-ftrace/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/debug/kprobes/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/debug/kretprobes/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/debug/optprobes/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/debug/stackprotector/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/debug/uprobes/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/debug/user-ret-profiler/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/io/dma-api-debug/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | ok | | cris: | TODO | | frv: | TODO |
Documentation/features/io/dma-contiguous/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/io/sg-chain/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/lib/strncasecmp/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/locking/cmpxchg-local/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/locking/lockdep/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | ok | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/locking/queued-rwlocks/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/locking/queued-spinlocks/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/locking/rwsem-optimized/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/perf/kprobes-event/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/perf/perf-regs/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/perf/perf-stackdump/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/sched/membarrier-sync-core/arch-support.txt +0 -1
@@ -33,7 +33,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/sched/numa-balancing/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | .. | | arm: | .. | | arm64: | .. | - | blackfin: | .. | | c6x: | .. | | cris: | .. | | frv: | .. |
Documentation/features/seccomp/seccomp-filter/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/time/arch-tick-broadcast/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/time/clockevents/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | ok | | c6x: | ok | | cris: | ok | | frv: | TODO |
Documentation/features/time/context-tracking/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/time/irq-time-acct/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/time/modern-timekeeping/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | ok | | arm: | TODO | | arm64: | ok | - | blackfin: | TODO | | c6x: | ok | | cris: | TODO | | frv: | ok |
Documentation/features/time/virt-cpuacct/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/vm/ELF-ASLR/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/vm/PG_uncached/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/vm/THP/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | .. | | c6x: | .. | | cris: | .. | | frv: | .. |
Documentation/features/vm/TLB/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | .. | | cris: | .. | | frv: | .. |
Documentation/features/vm/huge-vmap/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | TODO | | arm: | TODO | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/vm/ioremap_prot/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | ok | | arm: | TODO | | arm64: | TODO | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Documentation/features/vm/numa-memblock/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | .. | | arm: | .. | | arm64: | .. | - | blackfin: | .. | | c6x: | .. | | cris: | .. | | frv: | .. |
Documentation/features/vm/pte_special/arch-support.txt +0 -1
@@ -10,7 +10,6 @@ | arc: | ok | | arm: | ok | | arm64: | ok | - | blackfin: | TODO | | c6x: | TODO | | cris: | TODO | | frv: | TODO |
Signature · 1 line
2.7.4
PATCH 28/28 MAINTAINERS: Remove Blackfin from MAINTAINERS list
In reply to Aaron WuRemove Blackfin from MAINTAINERS list
--- MAINTAINERS | 52 ---------------------------------------------------- 1 file changed, 52 deletions(-)
MAINTAINERS +0 -52
@@ -841,13 +841,6 @@ F: sound/soc/codecs/ad7* F: sound/soc/codecs/ssm* F: sound/soc/codecs/sigmadsp.* -ANALOG DEVICES INC ASOC DRIVERS -L: [email protected] (moderated for non-subscribers) -L: [email protected] (moderated for non-subscribers) -W: http://blackfin.uclinux.org/ -S: Supported -F: sound/soc/blackfin/* - ANALOG DEVICES INC DMA DRIVERS M: Lars-Peter Clausen <[email protected]> W: http://ez.analog.com/community/linux-device-drivers
@@ -2629,51 +2622,6 @@ F: Documentation/filesystems/bfs.txt F: fs/bfs/ F: include/uapi/linux/bfs_fs.h -BLACKFIN ARCHITECTURE -L: [email protected] (moderated for non-subscribers) -T: git git://git.code.sf.net/p/adi-linux/code -W: http://blackfin.uclinux.org -S: Orphan -F: arch/blackfin/ - -BLACKFIN EMAC DRIVER -L: [email protected] (moderated for non-subscribers) -W: http://blackfin.uclinux.org -S: Orphan -F: drivers/net/ethernet/adi/ - -BLACKFIN MEDIA DRIVER -L: [email protected] (moderated for non-subscribers) -W: http://blackfin.uclinux.org/ -S: Orphan -F: drivers/media/platform/blackfin/ -F: drivers/media/i2c/adv7183* -F: drivers/media/i2c/vs6624* - -BLACKFIN RTC DRIVER -L: [email protected] (moderated for non-subscribers) -W: http://blackfin.uclinux.org -S: Orphan -F: drivers/rtc/rtc-bfin.c - -BLACKFIN SDH DRIVER -L: [email protected] (moderated for non-subscribers) -W: http://blackfin.uclinux.org -S: Orphan -F: drivers/mmc/host/bfin_sdh.c - -BLACKFIN SERIAL DRIVER -L: [email protected] (moderated for non-subscribers) -W: http://blackfin.uclinux.org -S: Orphan -F: drivers/tty/serial/bfin_uart.c - -BLACKFIN WATCHDOG DRIVER -L: [email protected] (moderated for non-subscribers) -W: http://blackfin.uclinux.org -S: Orphan -F: drivers/watchdog/bfin_wdt.c - BLINKM RGB LED DRIVER M: Jan-Simon Moeller <[email protected]> S: Maintained
Signature · 1 line
2.7.4