ARM: dts: Makefile: fix build for at91family
Subsystems (2)
PATCH 1/2 ARM: dts: Makefile: fix build for at91family
For at91family, makefile was building unwanted DTBs Moved them under specific target configuration.
--- arch/arm/dts/Makefile | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/dts/Makefile +4 -4
@@ -1,9 +1,9 @@ # SPDX-License-Identifier: GPL-2.0+ -dtb-$(CONFIG_AT91FAMILY) += at91sam9260-smartweb.dtb \ - at91sam9g20-taurus.dtb \ - at91sam9g45-corvus.dtb \ - at91sam9g45-gurnard.dtb +dtb-$(CONFIG_TARGET_SMARTWEB) += at91sam9260-smartweb.dtb +dtb-$(CONFIG_TARGET_TAURUS) += at91sam9g20-taurus.dtb +dtb-$(CONFIG_TARGET_CORVUS) += at91sam9g45-corvus.dtb +dtb-$(CONFIG_TARGET_GURNARD) += at91sam9g45-gurnard.dtb dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb
Signature · 1 line
2.7.4
PATCH 2/2 at91: fix devicetree warnings
This commit fixes various devicetree warnings in the at91 devicetrees
like:arch/arm/dts/sama5d36ek_cmp.dtb: Warning (avoid_unnecessary_addr_size): /gpio_keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
These warnings make buildman report failed builds for most of at91 boards. Thus, fixing it.
--- arch/arm/dts/at91-vinco.dts | 2 ++ arch/arm/dts/at91sam9260.dtsi | 3 --- arch/arm/dts/at91sam9261.dtsi | 3 --- arch/arm/dts/at91sam9263.dtsi | 3 --- arch/arm/dts/at91sam9g45.dtsi | 9 --------- arch/arm/dts/at91sam9n12.dtsi | 3 --- arch/arm/dts/at91sam9rl.dtsi | 5 ----- arch/arm/dts/at91sam9x5.dtsi | 5 ----- arch/arm/dts/sama5d27_som1.dtsi | 1 - arch/arm/dts/sama5d3.dtsi | 4 ---- arch/arm/dts/sama5d3xmb_cmp.dtsi | 2 -- arch/arm/dts/usb_a9263.dts | 2 -- 12 files changed, 2 insertions(+), 40 deletions(-)
arch/arm/dts/at91-vinco.dts +2 -0
@@ -152,6 +152,8 @@ }; tcb2: timer at fc024000 { + #address-cells = <1>; + #size-cells = <0>; timer at 0 { compatible = "atmel,tcb-timer"; reg = <0>;
arch/arm/dts/at91sam9260.dtsi +0 -3
@@ -37,9 +37,6 @@ spi0 = &spi0; }; cpus { - #address-cells = <0>; - #size-cells = <0>; - cpu { compatible = "arm,arm926ej-s"; device_type = "cpu";
arch/arm/dts/at91sam9261.dtsi +0 -3
@@ -34,9 +34,6 @@ }; cpus { - #address-cells = <0>; - #size-cells = <0>; - cpu { compatible = "arm,arm926ej-s"; device_type = "cpu";
arch/arm/dts/at91sam9263.dtsi +0 -3
@@ -36,9 +36,6 @@ }; cpus { - #address-cells = <0>; - #size-cells = <0>; - cpu { compatible = "arm,arm926ej-s"; device_type = "cpu";
arch/arm/dts/at91sam9g45.dtsi +0 -9
@@ -41,9 +41,6 @@ pwm0 = &pwm0; }; cpus { - #address-cells = <0>; - #size-cells = <0>; - cpu { compatible = "arm,arm926ej-s"; device_type = "cpu";
@@ -1042,8 +1039,6 @@ }; adc0: adc at fffb0000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9g45-adc"; reg = <0xfffb0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1086,10 +1081,6 @@ clocks = <&isi_clk>; clock-names = "isi_clk"; status = "disabled"; - port { - #address-cells = <1>; - #size-cells = <0>; - }; }; pwm0: pwm at fffb8000 {
arch/arm/dts/at91sam9n12.dtsi +0 -3
@@ -38,9 +38,6 @@ spi0 = &spi0; }; cpus { - #address-cells = <0>; - #size-cells = <0>; - cpu { compatible = "arm,arm926ej-s"; device_type = "cpu";
arch/arm/dts/at91sam9rl.dtsi +0 -5
@@ -38,9 +38,6 @@ }; cpus { - #address-cells = <0>; - #size-cells = <0>; - cpu { compatible = "arm,arm926ej-s"; device_type = "cpu";
@@ -253,8 +250,6 @@ }; adc0: adc at fffd0000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9rl-adc"; reg = <0xfffd0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
arch/arm/dts/at91sam9x5.dtsi +0 -5
@@ -41,9 +41,6 @@ }; cpus { - #address-cells = <0>; - #size-cells = <0>; - cpu { compatible = "arm,arm926ej-s"; device_type = "cpu";
@@ -1048,8 +1045,6 @@ }; adc0: adc at f804c000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9x5-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
arch/arm/dts/sama5d27_som1.dtsi +0 -1
@@ -55,7 +55,6 @@ aliases { spi0 = &qspi1; - u-boot,dm-pre-reloc; }; ahb {
arch/arm/dts/sama5d3.dtsi +0 -4
@@ -238,10 +238,6 @@ clocks = <&isi_clk>; clock-names = "isi_clk"; status = "disabled"; - port { - #address-cells = <1>; - #size-cells = <0>; - }; }; sfr: sfr at f0038000 {
arch/arm/dts/sama5d3xmb_cmp.dtsi +0 -2
@@ -221,8 +221,6 @@ compatible = "gpio-keys"; status = "okay"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>;
arch/arm/dts/usb_a9263.dts +0 -2
@@ -127,8 +127,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user_pb { label = "user_pb";
Signature · 1 line
2.7.4
PATCH 2/2 at91: fix devicetree warnings
Quoted 8 lines · Eugen Hristev
This commit fixes various devicetree warnings in the at91 devicetrees
like:arch/arm/dts/sama5d36ek_cmp.dtb: Warning (avoid_unnecessary_addr_size): /gpio_keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" propertyThese warnings make buildman report failed builds for most of at91 boards. Thus, fixing it.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180911/efd1a575/attachment.sig>
PATCH 1/2 ARM: dts: Makefile: fix build for at91family
In reply to Eugen HristevQuoted 4 lines · Eugen Hristev
For at91family, makefile was building unwanted DTBs Moved them under specific target configuration.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180911/f72501c5/attachment.sig>