Enable Y210, Y212, Y216 formats for ICL
Subsystems (3)
v3 cover Enable Y210, Y212, Y216 formats for ICL
These patches enable packed format YUV422-Y210, Y212 and Y216 for 10, 12 and 16 bit respectively for ICL.
For user space component IGT
IGT needs libraries for Pixman and Cairo to support more than 8bpc. Work going on from Maarten Lankhorst.
v2: addressed review comments of mahesh and alexandru
hdr handling of these 64 bit pixel format not inscope of this series
v3: addressed review comments of Juha-pekka(JP)
Vidya Srinivas (4):
drm: Add Y210, Y212, Y216 format definitions and fourcc drm/i915/icl: Add Y210, Y212, Y216 plane control definitions drm/i915/icl: Preparations for enabling Y210, Y212, Y216 formats drm/i915/icl: Enable Y210, Y212, Y216 format for primary and sprite
planes
drivers/gpu/drm/drm_fourcc.c | 3 ++ drivers/gpu/drm/i915/i915_reg.h | 3 ++ drivers/gpu/drm/i915/intel_display.c | 79 +++++++++++++++++++++++++++++++++--- drivers/gpu/drm/i915/intel_sprite.c | 45 +++++++++++++++++++- include/uapi/drm/drm_fourcc.h | 8 ++++ 5 files changed, 130 insertions(+), 8 deletions(-)
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 1/4 drm: Add Y210, Y212, Y216 format definitions and fourcc
From: Vidya Srinivas <[email protected]>
The following pixel formats are packed format that follows 4:2:2 chroma sampling. For memory represenation each component is allocated 16 bits each. Thus each pixel occupies 32bit.
Y210: Valid data occupies MSB 10 bits.
LSB 6 bits are filled with zeroes.
Y212: Valid data occupies MSB 12 bits.
LSB 4 bits are filled with zeroes.
Y216: Valid data occupies 16 bits,
doesn't require any padding bits.
First 16 bits stores the Y value and the next 16 bits stores one of the chroma samples alternatively. The first luma sample will be accompanied by first U sample and second luma sample is accompanied by the first V sample.
v2: is_yuv setted to true (mahesh)
different order of yuv samples (mahesh): still update from hardware team pending
change in comment (alexandru)
v3: change in patch comment (juha)
change in fourcc_code comment (juha)
different order of yuv samples needs to be defined for Y210/ Y212/Y216 (update from h/w folks): not including in this patch, will do in other patch series (if reqd)
--- drivers/gpu/drm/drm_fourcc.c | 3 +++ include/uapi/drm/drm_fourcc.h | 8 ++++++++ 2 files changed, 11 insertions(+)
drivers/gpu/drm/drm_fourcc.c +3 -0
@@ -225,6 +225,9 @@ const struct drm_format_info *__drm_format_info(u32 format) { .format = DRM_FORMAT_UYVY, .depth = 0, .num_planes = 1, .cpp = { 2, 0, 0 }, .hsub = 2, .vsub = 1, .is_yuv = true }, { .format = DRM_FORMAT_VYUY, .depth = 0, .num_planes = 1, .cpp = { 2, 0, 0 }, .hsub = 2, .vsub = 1, .is_yuv = true }, { .format = DRM_FORMAT_AYUV, .depth = 0, .num_planes = 1, .cpp = { 4, 0, 0 }, .hsub = 1, .vsub = 1, .has_alpha = true, .is_yuv = true }, + { .format = DRM_FORMAT_Y210, .depth = 0, .num_planes = 1, .cpp = { 8, 0, 0 }, .hsub = 2, .vsub = 1, .is_yuv = true }, + { .format = DRM_FORMAT_Y212, .depth = 0, .num_planes = 1, .cpp = { 8, 0, 0 }, .hsub = 2, .vsub = 1, .is_yuv = true }, + { .format = DRM_FORMAT_Y216, .depth = 0, .num_planes = 1, .cpp = { 8, 0, 0 }, .hsub = 2, .vsub = 1, .is_yuv = true }, }; unsigned int i;
include/uapi/drm/drm_fourcc.h +8 -0
@@ -153,6 +153,14 @@#define DRM_FORMAT_AYUV fourcc_code('A', 'Y', 'U', 'V')/* [31:0] A:Y:Cb:Cr 8:8:8:8 little endian */ /* +* packed Y2xx indicate for each component, xx valid data occupy msb +* 16-xx padding occupy lsb +*/ +#define DRM_FORMAT_Y210 fourcc_code('Y', '2', '1', '0')/* [63:0] Y0:x:Cb0:x:Y1:x:Cr1:x 10:6:10:6:10:6:10:6 little endian */ +#define DRM_FORMAT_Y212 fourcc_code('Y', '2', '1', '2')/* [63:0] Y0:x:Cb0:x:Y1:x:Cr1:x 12:4:12:4:12:4:12:4 little endian */ +#define DRM_FORMAT_Y216 fourcc_code('Y', '2', '1', '6')/* [63:0] Y0:Cb0:Y1:Cr1 16:16:16:16 little endian */ + +/* * 2 plane RGB + A * index 0 = RGB plane, same format as the corresponding non _A8 format has * index 1 = A plane, [7:0] A
Signature · 6 lines
1.9.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v3 2/4 drm/i915/icl: Add Y210, Y212, Y216 plane control definitions
In reply to Swati SharmaFrom: Vidya Srinivas <[email protected]>
Added needed plane control flag definitions for Y210, Y212 and Y216 formats.
v3: no change
--- drivers/gpu/drm/i915/i915_reg.h | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -6506,6 +6506,9 @@ enum {#define PLANE_CTL_FORMAT_RGB_565 (14 << 24)#define ICL_PLANE_CTL_FORMAT_MASK (0x1f << 23)#define PLANE_CTL_PIPE_CSC_ENABLE (1 << 23)/* Pre-GLK */ +#define PLANE_CTL_FORMAT_Y210 (1 << 23) +#define PLANE_CTL_FORMAT_Y212 (3 << 23) +#define PLANE_CTL_FORMAT_Y216 (5 << 23)#define PLANE_CTL_KEY_ENABLE_MASK (0x3 << 21)#define PLANE_CTL_KEY_ENABLE_SOURCE (1 << 21)#define PLANE_CTL_KEY_ENABLE_DESTINATION (2 << 21)
Signature · 6 lines
1.9.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v3 2/4] drm/i915/icl: Add Y210, Y212, Y216 plane control definitions
I did earlier give R-b for this patch. The patch anyway hasn't changed as those defines have not changed.
/Juha-Pekka
Swati Sharma kirjoitti 22.10.2018 klo 8.31:
Quoted 19 lines
From: Vidya Srinivas <[email protected]>
Added needed plane control flag definitions for Y210, Y212 and Y216 formats.
v3: no change
Signed-off-by Swati Sharma <[email protected]>Signed-off-by Vidya Srinivas <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 3 +++ 1 file changed, 3 insertions(+)drivers/gpu/drm/i915/i915_reg.h +0
-0
drivers/gpu/drm/i915/i915_reg.h enum { · line 6514
Quoted 9 lines
drivers/gpu/drm/i915/i915_reg.h +3
-0@@ -6506,6 +6506,9 @@ enum {#define PLANE_CTL_FORMAT_RGB_565 (14 << 24)#define ICL_PLANE_CTL_FORMAT_MASK (0x1f << 23)#define PLANE_CTL_PIPE_CSC_ENABLE (1 << 23)/* Pre-GLK */ +#define PLANE_CTL_FORMAT_Y210 (1 << 23) +#define PLANE_CTL_FORMAT_Y212 (3 << 23) +#define PLANE_CTL_FORMAT_Y216 (5 << 23)#define PLANE_CTL_KEY_ENABLE_MASK (0x3 << 21)#define PLANE_CTL_KEY_ENABLE_SOURCE (1 << 21)#define PLANE_CTL_KEY_ENABLE_DESTINATION (2 << 21)
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 3/4 drm/i915/icl: Preparations for enabling Y210, Y212, Y216 formats
In reply to Swati SharmaFrom: Vidya Srinivas <[email protected]>
v3: case handling checking INTEL_GEN(dev_priv) < 11 added for these 3
new pixel formats (juha)
--- drivers/gpu/drm/i915/intel_display.c | 21 +++++++++++++++++++++ drivers/gpu/drm/i915/intel_sprite.c | 3 +++ 2 files changed, 24 insertions(+)
drivers/gpu/drm/i915/intel_display.c +21 -0
@@ -3565,6 +3565,12 @@ static u32 skl_plane_ctl_format(uint32_t pixel_format)return PLANE_CTL_FORMAT_YUV422 |PLANE_CTL_YUV422_VYUY ;case DRM_FORMAT_NV12 :return PLANE_CTL_FORMAT_NV12 ; +case DRM_FORMAT_Y210 : +return PLANE_CTL_FORMAT_Y210 ; +case DRM_FORMAT_Y212 : +return PLANE_CTL_FORMAT_Y212 ; +case DRM_FORMAT_Y216 : +return PLANE_CTL_FORMAT_Y216 ;default :MISSING_CASE (pixel_format); }
@@ -5022,6 +5028,9 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,case DRM_FORMAT_UYVY :case DRM_FORMAT_VYUY :case DRM_FORMAT_NV12 : +case DRM_FORMAT_Y210 : +case DRM_FORMAT_Y212 : +case DRM_FORMAT_Y216 :break ;default : DRM_DEBUG_KMS("[PLANE:%d:%s] FB:%d unsupported scaling format 0x%x\n",
@@ -13474,6 +13483,9 @@ static bool skl_plane_format_mod_supported(struct drm_plane *_plane,case DRM_FORMAT_YVYU :case DRM_FORMAT_UYVY :case DRM_FORMAT_VYUY : +case DRM_FORMAT_Y210 : +case DRM_FORMAT_Y212 : +case DRM_FORMAT_Y216 :case DRM_FORMAT_NV12 :if (modifier == I915_FORMAT_MOD_Yf_TILED)return true;
@@ -14632,6 +14644,15 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb, goto err; }break ; +case DRM_FORMAT_Y210 : +case DRM_FORMAT_Y212 : +case DRM_FORMAT_Y216 : +if (INTEL_GEN (dev_priv) <11 ) { +DRM_DEBUG_KMS ("unsupported pixel format: %s\n" , +drm_get_format_name (mode_cmd->pixel_format, &format_name)); + goto err; + } +break ;default :DRM_DEBUG_KMS ("unsupported pixel format: %s\n" ,drm_get_format_name (mode_cmd->pixel_format, &format_name));
drivers/gpu/drm/i915/intel_sprite.c +3 -0
@@ -1702,6 +1702,9 @@ static bool skl_plane_format_mod_supported(struct drm_plane *_plane,case DRM_FORMAT_YVYU :case DRM_FORMAT_UYVY :case DRM_FORMAT_VYUY : +case DRM_FORMAT_Y210 : +case DRM_FORMAT_Y212 : +case DRM_FORMAT_Y216 :case DRM_FORMAT_NV12 :if (modifier == I915_FORMAT_MOD_Yf_TILED)return true;
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 4/4 drm/i915/icl: Enable Y210, Y212, Y216 format for primary and sprite planes
In reply to Swati SharmaFrom: Vidya Srinivas <[email protected]>
In this patch, a list for icl specific pixel formats is created in which Y210, Y212 and Y216 pixel formats are added along with legacy pixel formats for primary and sprite plane.
v3: since support for planar formats on ICL was getting totally
skipped, added support for the same in intel_display.c and intel_sprite.c. (juha)
--- drivers/gpu/drm/i915/intel_display.c | 58 ++++++++++++++++++++++++++++++++---- drivers/gpu/drm/i915/intel_sprite.c | 42 ++++++++++++++++++++++++-- 2 files changed, 92 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_display.c +52 -6
@@ -105,6 +105,42 @@ DRM_FORMAT_NV12, }; +static const uint32_t icl_primary_formats[] = { +DRM_FORMAT_C8 , +DRM_FORMAT_RGB565 , +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_XBGR8888 , +DRM_FORMAT_ARGB8888 , +DRM_FORMAT_ABGR8888 , +DRM_FORMAT_XRGB2101010 , +DRM_FORMAT_XBGR2101010 , +DRM_FORMAT_YUYV , +DRM_FORMAT_YVYU , +DRM_FORMAT_UYVY , +DRM_FORMAT_VYUY , +DRM_FORMAT_Y210 , +DRM_FORMAT_Y212 , +DRM_FORMAT_Y216 , +}; + +static const uint32_t icl_pri_planar_formats[] = { +DRM_FORMAT_C8 , +DRM_FORMAT_RGB565 , +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_XBGR8888 , +DRM_FORMAT_ARGB8888 , +DRM_FORMAT_ABGR8888 , +DRM_FORMAT_XRGB2101010 , +DRM_FORMAT_XBGR2101010 , +DRM_FORMAT_YUYV , +DRM_FORMAT_YVYU , +DRM_FORMAT_UYVY , +DRM_FORMAT_VYUY , +DRM_FORMAT_Y210 , +DRM_FORMAT_Y212 , +DRM_FORMAT_Y216 , +}; +static const uint64_t skl_format_modifiers_noccs[] = { I915_FORMAT_MOD_Yf_TILED,I915_FORMAT_MOD_Y_TILED ,
@@ -13788,16 +13824,26 @@ bool skl_plane_has_planar(struct drm_i915_private *dev_priv, fbc->possible_framebuffer_bits |= primary->frontbuffer_bit; } +if (INTEL_GEN (dev_priv) >=9 ) { primary->has_ccs =skl_plane_has_ccs (dev_priv, pipe, -PLANE_PRIMARY ); - -if (skl_plane_has_planar (dev_priv, pipe,PLANE_PRIMARY )) { +PLANE_PRIMARY ); + +if (skl_plane_has_planar (dev_priv, pipe, +PLANE_PRIMARY )) { +if (INTEL_GEN (dev_priv) >=11 ) { + intel_primary_formats = icl_primary_formats; + num_formats =ARRAY_SIZE (icl_primary_formats); + }else { + intel_primary_formats = skl_primary_formats; + num_formats =ARRAY_SIZE (skl_primary_formats); + } + }else if (INTEL_GEN (dev_priv) >=11 ) { + intel_primary_formats = icl_pri_planar_formats; + num_formats =ARRAY_SIZE (icl_pri_planar_formats); + }else { intel_primary_formats = skl_pri_planar_formats; num_formats =ARRAY_SIZE (skl_pri_planar_formats); - }else { - intel_primary_formats = skl_primary_formats; - num_formats =ARRAY_SIZE (skl_primary_formats); }if (primary->has_ccs)
drivers/gpu/drm/i915/intel_sprite.c +40 -2
54 lines not on this page · raw message
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v3 4/4] drm/i915/icl: Enable Y210, Y212, Y216 format for primary and sprite planes
Swati Sharma kirjoitti 22.10.2018 klo 8.31:
Quoted 65 lines
From: Vidya Srinivas <[email protected]>
In this patch, a list for icl specific pixel formats is created in which Y210, Y212 and Y216 pixel formats are added along with legacy pixel formats for primary and sprite plane.
v3: since support for planar formats on ICL was getting totally
skipped, added support for the same inintel_display.candintel_sprite.c. (juha)Signed-off-by Swati Sharma <[email protected]>Signed-off-by Vidya Srinivas <[email protected]>--- drivers/gpu/drm/i915/intel_display.c | 58 ++++++++++++++++++++++++++++++++---- drivers/gpu/drm/i915/intel_sprite.c | 42 ++++++++++++++++++++++++-- 2 files changed, 92 insertions(+), 8 deletions(-)drivers/gpu/drm/i915/intel_display.c +36
-0@@ -105,6 +105,42 @@ DRM_FORMAT_NV12, }; +static const uint32_t icl_primary_formats[] = { +DRM_FORMAT_C8 , +DRM_FORMAT_RGB565 , +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_XBGR8888 , +DRM_FORMAT_ARGB8888 , +DRM_FORMAT_ABGR8888 , +DRM_FORMAT_XRGB2101010 , +DRM_FORMAT_XBGR2101010 , +DRM_FORMAT_YUYV , +DRM_FORMAT_YVYU , +DRM_FORMAT_UYVY , +DRM_FORMAT_VYUY , +DRM_FORMAT_Y210 , +DRM_FORMAT_Y212 , +DRM_FORMAT_Y216 , +}; + +static const uint32_t icl_pri_planar_formats[] = { +DRM_FORMAT_C8 , +DRM_FORMAT_RGB565 , +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_XBGR8888 , +DRM_FORMAT_ARGB8888 , +DRM_FORMAT_ABGR8888 , +DRM_FORMAT_XRGB2101010 , +DRM_FORMAT_XBGR2101010 , +DRM_FORMAT_YUYV , +DRM_FORMAT_YVYU , +DRM_FORMAT_UYVY , +DRM_FORMAT_VYUY , +DRM_FORMAT_Y210 , +DRM_FORMAT_Y212 , +DRM_FORMAT_Y216 , +}; +static const uint64_t skl_format_modifiers_noccs[] = { I915_FORMAT_MOD_Yf_TILED,I915_FORMAT_MOD_Y_TILED ,
drivers/gpu/drm/i915/intel_display.c bool skl_plane_has_planar(struct drm_i915_private *dev_priv, · line 13827
Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +1
-0@@ -13788,16 +13824,26 @@ bool skl_plane_has_planar(struct drm_i915_private *dev_priv, fbc->possible_framebuffer_bits |= primary->frontbuffer_bit; } +
^^ stray newline?
The next if(){}else{} I would write separating gen11 from gen9 because you need both tables, primary_formats as well as pri_planar_formats, for gen11.
So, instead of having
if(>=gen9) {
if(>=gen11) {
..
} else {
..
}
}
I'd write it like
if(>=gen11) {
..
} else if(>=gen9) {
..
} els...
I think it will be much easier to read. Same below in intel_sprite.c
/Juha-Pekka
Quoted 79 lines
drivers/gpu/drm/i915/intel_display.c +15
-6if (INTEL_GEN (dev_priv) >=9 ) { primary->has_ccs =skl_plane_has_ccs (dev_priv, pipe, -PLANE_PRIMARY ); - -if (skl_plane_has_planar (dev_priv, pipe,PLANE_PRIMARY )) { +PLANE_PRIMARY ); + +if (skl_plane_has_planar (dev_priv, pipe, +PLANE_PRIMARY )) { +if (INTEL_GEN (dev_priv) >=11 ) { + intel_primary_formats = icl_primary_formats; + num_formats =ARRAY_SIZE (icl_primary_formats); + }else { + intel_primary_formats = skl_primary_formats; + num_formats =ARRAY_SIZE (skl_primary_formats); + } + }else if (INTEL_GEN (dev_priv) >=11 ) { + intel_primary_formats = icl_pri_planar_formats; + num_formats =ARRAY_SIZE (icl_pri_planar_formats); + }else { intel_primary_formats = skl_pri_planar_formats; num_formats =ARRAY_SIZE (skl_pri_planar_formats); - }else { - intel_primary_formats = skl_primary_formats; - num_formats =ARRAY_SIZE (skl_primary_formats); }if (primary->has_ccs)drivers/gpu/drm/i915/intel_sprite.c +33
-2@@ -1564,6 +1564,36 @@ int intel_sprite_set_colorkey_ioctl(struct drm_device *dev, void *data, DRM_FORMAT_NV12, }; +static uint32_t icl_plane_formats[] = { +DRM_FORMAT_RGB565 , +DRM_FORMAT_ABGR8888 , +DRM_FORMAT_ARGB8888 , +DRM_FORMAT_XBGR8888 , +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_YUYV , +DRM_FORMAT_YVYU , +DRM_FORMAT_UYVY , +DRM_FORMAT_VYUY , +DRM_FORMAT_Y210 , +DRM_FORMAT_Y212 , +DRM_FORMAT_Y216 , +}; + +static uint32_t icl_planar_formats[] = { +DRM_FORMAT_RGB565 , +DRM_FORMAT_ABGR8888 , +DRM_FORMAT_ARGB8888 , +DRM_FORMAT_XBGR8888 , +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_YUYV , +DRM_FORMAT_YVYU , +DRM_FORMAT_UYVY , +DRM_FORMAT_VYUY , +DRM_FORMAT_Y210 , +DRM_FORMAT_Y212 , +DRM_FORMAT_Y216 , +}; +static const uint64_t skl_plane_format_modifiers_noccs[] = { I915_FORMAT_MOD_Yf_TILED,I915_FORMAT_MOD_Y_TILED ,@@ -1822,8 +1852,16 @@ struct intel_plane *if (skl_plane_has_planar (dev_priv, pipe,PLANE_SPRITE0 + plane)) { - plane_formats = skl_planar_formats; - num_plane_formats =ARRAY_SIZE (skl_planar_formats); +if (INTEL_GEN (dev_priv) >=11 ) { + plane_formats = icl_planar_formats; + num_plane_formats =ARRAY_SIZE (icl_planar_formats);
drivers/gpu/drm/i915/intel_sprite.c struct intel_plane * · line 1867
Quoted 10 lines
drivers/gpu/drm/i915/intel_sprite.c +7
-0+ }else { + plane_formats = skl_planar_formats; + num_plane_formats =ARRAY_SIZE (skl_planar_formats); + } + }else if (INTEL_GEN (dev_priv) >=11 ) { + plane_formats = icl_plane_formats; + num_plane_formats =ARRAY_SIZE (icl_plane_formats); }else { plane_formats = skl_plane_formats; num_plane_formats =ARRAY_SIZE (skl_plane_formats);
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for Enable Y210, Y212, Y216 formats for ICL (rev3)
In reply to Swati Sharma== Series Details ==
== Series Details ==
Series: Enable Y210, Y212, Y216 formats for ICL (rev3)
URL : https://patchwork.freedesktop.org/series/48729/
State : failure
== Summary ==
Applying: drm: Add Y210, Y212, Y216 format definitions and fourcc
Applying: drm/i915/icl: Add Y210, Y212, Y216 plane control definitions
Applying: drm/i915/icl: Preparations for enabling Y210, Y212, Y216 formats Using index info to reconstruct a base tree...
M drivers/gpu/drm/i915/intel_display.c
M drivers/gpu/drm/i915/intel_sprite.c
Falling back to patching base and 3-way merge...
Auto-merging drivers/gpu/drm/i915/intel_sprite.c
Auto-merging drivers/gpu/drm/i915/intel_display.c
CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/intel_display.c
error: Failed to merge in the changes.
Patch failed at 0003 drm/i915/icl: Preparations for enabling Y210, Y212, Y216 formats Use 'git am --show-current-patch' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx