Add support for Gen 11 pipe color features
Subsystems (2)
v3 cover Add support for Gen 11 pipe color features
This patch series adds support for Gen11 pipe degamma, CSC and gamma hardware blocks.
CRC checks are not working for 10bit gamma but works for 8bit pallete modes which seems to be due to some rounding errors in pipe.
ToDo: Support for Multi Segmented Gamma will be added later.
v2: Addressed Maarten's review comments and re-ordered the patch series.
v3: Addressed Matt's review comments. Removed rmw patterns as suggested by Matt.
Uma Shankar (3):
drm/i915/icl: Add icl pipe degamma and gamma support drm/i915/icl: Enable ICL Pipe CSC block drm/i915/icl: Add degamma and gamma lut size to gen11 caps
drivers/gpu/drm/i915/i915_pci.c | 3 +- drivers/gpu/drm/i915/i915_reg.h | 5 ++ drivers/gpu/drm/i915/intel_color.c | 101 +++++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_drv.h | 3 ++ 4 files changed, 106 insertions(+), 6 deletions(-)
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 1/3 drm/i915/icl: Add icl pipe degamma and gamma support
Add support for icl pipe degamma and gamma.
v2: Removed a POSTING_READ and corrected the Bit
Definition as per Maarten's comments.
v3: Addressed Matt's review comments. Removed rmw patterns as suggested by Matt.
--- drivers/gpu/drm/i915/i915_reg.h | 3 ++ drivers/gpu/drm/i915/intel_color.c | 73 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 76 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -7058,6 +7058,9 @@ enum {#define GAMMA_MODE_MODE_12BIT (2 << 0)#define GAMMA_MODE_MODE_SPLIT (3 << 0) +#define PRE_CSC_GAMMA_ENABLE (1 << 31) +#define POST_CSC_GAMMA_ENABLE (1 << 30) +/* DMC/CSR */ #define CSR_PROGRAM (i) _MMIO(0x80000 + (i) * 4)#define CSR_SSP_BASE_ADDR_GEN9 0x00002FC0
drivers/gpu/drm/i915/intel_color.c +73 -0
103 lines not on this page · raw message
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [v3 1/3] drm/i915/icl: Add icl pipe degamma and gamma support
Quoted 41 lines · Uma Shankar
Add support for icl pipe degamma and gamma.
v2: Removed a
POSTING_READand corrected the Bit
Definition as per Maarten's comments.v3: Addressed Matt's review comments. Removed rmw patterns as suggested by Matt.
Signed-off-by Uma Shankar <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 3 ++ drivers/gpu/drm/i915/intel_color.c | 73 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 76 insertions(+)drivers/gpu/drm/i915/i915_reg.h +3
-0@@ -7058,6 +7058,9 @@ enum {#define GAMMA_MODE_MODE_12BIT (2 << 0)#define GAMMA_MODE_MODE_SPLIT (3 << 0) +#define PRE_CSC_GAMMA_ENABLE (1 << 31) +#define POST_CSC_GAMMA_ENABLE (1 << 30) +/* DMC/CSR */ #define CSR_PROGRAM (i) _MMIO(0x80000 + (i) * 4)#define CSR_SSP_BASE_ADDR_GEN9 0x00002FC0drivers/gpu/drm/i915/intel_color.c +1
-0@@ -422,6 +422,7 @@ static void bdw_load_degamma_lut(struct drm_crtc_state *state)static void bdw_load_gamma_lut (struct drm_crtc_state *state,u32 offset) {struct drm_i915_private *dev_priv =to_i915 (state->crtc->dev); +struct intel_crtc_state *intel_state =to_intel_crtc_state (state);enum pipe pipe =to_intel_crtc (state->crtc)->pipe;uint32_t i, lut_size =INTEL_INFO (dev_priv)->color.gamma_lut_size;
drivers/gpu/drm/i915/intel_color.c static void bdw_load_gamma_lut(struct drm_crtc_state *state, u32 offset) · line 470
Quoted 6 lines
drivers/gpu/drm/i915/intel_color.c +3
-0@@ -464,6 +465,9 @@ static void bdw_load_gamma_lut(struct drm_crtc_state *state, u32 offset)I915_WRITE (PREC_PAL_GC_MAX (pipe,1 ), (1 <<16 ) -1 );I915_WRITE (PREC_PAL_GC_MAX (pipe,2 ), (1 <<16 ) -1 ); } + +if (INTEL_GEN (dev_priv) >=11 ) + intel_state->gamma_mode |=POST_CSC_GAMMA_ENABLE ;
icl_load_luts updates this field as soon as this function returns, so it might be easier to make this update there, at the same point you set MODE_10BIT.
However the overall use and handling of gamma_mode by the driver seems strange. Generally we try to calculate important state variables during atomic check and then use those derived state values during the commit programming phase, but we're not following that pattern with this field. Can we just move the logic to build this field into the atomic check phase so that we're not trying to update state during the commit?
Actually, looking closer, I'm not sure if we even need this field. For most platforms we have a fixed set of bits that we write (e.g., PRE_CSC_GAMMA_ENABLE | POST_CSC_GAMMA_ENABLE | GAMMA_MODE_10_BIT for ICL), so we can just put those directly into the I915_WRITE statement. Unless I'm overlooking something, the only place where this variable is used for something else is in haswell_load_luts() where we have to disable IPS before accessing the LUT's if we're in split gamma mode. But the driver itself only ever sets 8BIT for Haswell as far as I can see. BIOS might have put us in split mode before the driver loaded, but that might be easier to sanitize during hardware state readout?
Quoted 26 lines
drivers/gpu/drm/i915/intel_color.c +19
-0}/* Loads the palette/gamma unit for the CRTC on Broadwell+. */ @@ -523,6 +527,53 @@ static void glk_load_degamma_lut(struct drm_crtc_state *state)I915_WRITE (PRE_CSC_GAMC_DATA (pipe), (1 <<16 )); } +static void icl_load_degamma_lut (struct drm_crtc_state *state) +{ +struct drm_i915_private *dev_priv =to_i915 (state->crtc->dev); +struct intel_crtc_state *intel_state =to_intel_crtc_state (state); +enum pipe pipe =to_intel_crtc (state->crtc)->pipe; +const uint32_t lut_size =INTEL_INFO (dev_priv)->color.degamma_lut_size; +uint32_t i; + +/* +* When setting the auto-increment bit, the hardware seems to +* ignore the index bits, so we need to reset it to index 0 +* separately. +*/ +I915_WRITE (PRE_CSC_GAMC_INDEX (pipe),0 ); +I915_WRITE (PRE_CSC_GAMC_INDEX (pipe),PRE_CSC_GAMC_AUTO_INCREMENT ); + +if (state->degamma_lut) { +struct drm_color_lut *lut = + (struct drm_color_lut *) state->degamma_lut->data;
drivers/gpu/drm/i915/intel_color.c static void glk_load_degamma_lut(struct drm_crtc_state *state) · line 558
Quoted 10 lines
drivers/gpu/drm/i915/intel_color.c +10
-0+for (i =0 ; i < lut_size; i++) { +/* +* First 33 entries represent range from 0 to 1.0 +* 34th and 35th entry will represent extended range +* inputs 3.0 and 7.0 respectively, currently clamped +* at 1.0. +* ToDo: Extend to max 7.0. +*/ +uint32_t word = +drm_color_lut_extract (lut[i].red,16 );
A few minor things I notice; not sure if you want to bother addressing them at the moment or not, but I figured I'd point them out now:
* Technically we could just set word directly to lut[i].red since we're extracting the full 16-bits (so no rounding) and our u16 input can't hold any value outside our clamping range of [0,0.99998].
* It's a minor deviation, but the scaling is slightly off here such that the 33rd entry written by this loop (which represents a 1.0 input) will be clamped to 0xFFFF (0.99998) rather than 1.0. So userspace won't be able to exactly match the linear table we'd otherwise program if no userspace LUT was provided.
* GLK and gen11 deviate from our other platforms in that they just use a single value for red, green, and blue rather than accepting separate values for each. GLK punts on this and doesn't even expose degamma to userspace (just loads a linear table), whereas your patch silently ignores green/blue values, which might be a surprise to userspace. Maybe we should switch GLK code to do what you do here, but also add some validation of new table blobs during atomic-check such that we reject any table with non-equal values for r/g/b. While we're at it, we could also check to ensure that LUT entries are never decreasing, since that's also a hardware requirement documented in the bspec.
Matt
Quoted 60 lines
drivers/gpu/drm/i915/intel_color.c +40
-0+I915_WRITE (PRE_CSC_GAMC_DATA (pipe), word); + } + }else { +/* load a linear table. */ +for (i =0 ; i < lut_size; i++) { +uint32_t v = (i * (1 <<16 )) / (lut_size -1 ); + +I915_WRITE (PRE_CSC_GAMC_DATA (pipe), v); + } + } + + intel_state->gamma_mode |=PRE_CSC_GAMMA_ENABLE ; + +/* Clamp values > 1.0. */ +while (i++ <35 ) +I915_WRITE (PRE_CSC_GAMC_DATA (pipe), (1 <<16 )); +} +static void glk_load_luts (struct drm_crtc_state *state) {struct drm_crtc *crtc = state->crtc;@@ -606,6 +657,26 @@ static void cherryview_load_luts(struct drm_crtc_state *state)i9xx_load_luts_internal (crtc,NULL ,to_intel_crtc_state (state)); } +static void icl_load_luts (struct drm_crtc_state *state) +{ +struct drm_crtc *crtc = state->crtc; +struct drm_device *dev = crtc->dev; +struct drm_i915_private *dev_priv =to_i915 (dev); +struct intel_crtc_state *intel_state =to_intel_crtc_state (state); +enum pipe pipe =to_intel_crtc (crtc)->pipe; + +if (crtc_state_is_legacy_gamma (state)) { +haswell_load_luts (state); +return ; + } + +icl_load_degamma_lut (state); +bdw_load_gamma_lut (state,0 ); + + intel_state->gamma_mode |=GAMMA_MODE_MODE_10BIT ; +I915_WRITE (GAMMA_MODE (pipe), intel_state->gamma_mode); +} +void intel_color_load_luts (struct drm_crtc_state *crtc_state) {struct drm_device *dev = crtc_state->crtc->dev;@@ -662,6 +733,8 @@ void intel_color_init(struct drm_crtc *crtc) }else if (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) { dev_priv->display.load_csc_matrix = ilk_load_csc_matrix; dev_priv->display.load_luts = glk_load_luts; + }else if (IS_ICELAKE (dev_priv)) { + dev_priv->display.load_luts = icl_load_luts; }else { dev_priv->display.load_luts = i9xx_load_luts; }Signature · 1 line
1.9.1
Signature · 9 lines
Matt Roper Graphics Software Engineer IoTG Platform Enabling & Development Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [v3 1/3] drm/i915/icl: Add icl pipe degamma and gamma support
Quoted 73 lines
-----Original Message-----
From: Roper, Matthew D
Sent: Friday, November 30, 2018 4:38 AM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Lankhorst, Maarten <[email protected]>; Syrjala, Ville <[email protected]>; Sharma, Shashank <[email protected]>
Subject: Re: [v3 1/3] drm/i915/icl: Add icl pipe degamma and gamma supportdrivers/gpu/drm/i915/intel_color.c static void bdw_load_gamma_lut(struct drm_crtc_state
Quoted 43 lines · Uma Shankar
Add support for icl pipe degamma and gamma.
v2: Removed a
POSTING_READand corrected the Bit Definition as per Maarten's comments.v3: Addressed Matt's review comments. Removed rmw patterns as suggested by Matt.
Signed-off-by Uma Shankar <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 3 ++ drivers/gpu/drm/i915/intel_color.c | 73 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 76 insertions(+)(quoted diff) +0
-0
b/drivers/gpu/drm/i915/i915_reg.hindex 47baf2fe..b0147bf 100644drivers/gpu/drm/i915/i915_reg.h +3
-0@@ -7058,6 +7058,9 @@ enum {#define GAMMA_MODE_MODE_12BIT (2 << 0)#define GAMMA_MODE_MODE_SPLIT (3 << 0) +#define PRE_CSC_GAMMA_ENABLE (1 << 31) +#define POST_CSC_GAMMA_ENABLE (1 << 30) +/* DMC/CSR */ #define CSR_PROGRAM (i) _MMIO(0x80000 + (i) * 4)#define CSR_SSP_BASE_ADDR_GEN9 0x00002FC0drivers/gpu/drm/i915/intel_color.c +0
-0@@ -422,6 +422,7 @@ static void bdw_load_degamma_lut(struct
drm_crtc_state*state) static voidbdw_load_gamma_lut(struct drm_crtc_state *state, u32 offset){drivers/gpu/drm/i915/intel_color.c +1
-0struct drm_i915_private *dev_priv =to_i915 (state->crtc->dev); +struct intel_crtc_state *intel_state =to_intel_crtc_state (state);enum pipe pipe =to_intel_crtc (state->crtc)->pipe;uint32_t i, lut_size =INTEL_INFO (dev_priv)->color.gamma_lut_size;@@ -464,6 +465,9 @@ static void bdw_load_gamma_lut(struct drm_crtc_state*state, u32 offset)
drivers/gpu/drm/i915/intel_color.c static void bdw_load_gamma_lut(struct drm_crtc_state *state, u32 offset) · line 470
Quoted 6 lines
drivers/gpu/drm/i915/intel_color.c +3
-0I915_WRITE (PREC_PAL_GC_MAX (pipe,1 ), (1 <<16 ) -1 );I915_WRITE (PREC_PAL_GC_MAX (pipe,2 ), (1 <<16 ) -1 ); } + +if (INTEL_GEN (dev_priv) >=11 ) + intel_state->gamma_mode |=POST_CSC_GAMMA_ENABLE ;
icl_load_lutsupdates this field as soon as this function returns, so it might be easier to make this update there, at the same point you setMODE_10BIT.However the overall use and handling of
gamma_modeby the driver seems strange. Generally we try to calculate important state variables during atomic check and then use those derived state values during the commit programming phase, but we're not following that pattern with this field.
Can we just move the logic to build this field into the atomic check phase so that we're not trying to update state during the commit?
Quoted 11 lines
Actually, looking closer, I'm not sure if we even need this field. For most platforms we have a fixed set of bits that we write (e.g.,
PRE_CSC_GAMMA_ENABLE|POST_CSC_GAMMA_ENABLE|GAMMA_MODE_10_BITfor ICL), so we can just put those directly into theI915_WRITEstatement.
Unless I'm overlooking something, the only place where this variable is used for something else is inhaswell_load_luts()where we have to disable IPS before accessing the LUT's if we're in split gamma mode.
But the driver itself only ever sets 8BIT for Haswell as far as I can see. BIOS might have put us in split mode before the driver loaded, but that might be easier to sanitize during hardware state readout?
Yeah I agree, we can avoid this state variable altogether. I will try to clean it up and resend the series.
Quoted 42 lines
drivers/gpu/drm/i915/intel_color.c static void bdw_load_gamma_lut(struct drm_crtc_state
Quoted 5 lines
drivers/gpu/drm/i915/intel_color.c +0
-1} /* Loads the palette/gamma unit for the CRTC on Broadwell+. */ @@ -523,6 +527,53 @@ static void glk_load_degamma_lut(struct drm_crtc_state*state)
Quoted 8 lines
drivers/gpu/drm/i915/intel_color.c +5
-0I915_WRITE (PRE_CSC_GAMC_DATA (pipe), (1 <<16 )); } +static void icl_load_degamma_lut (struct drm_crtc_state *state) { +struct drm_i915_private *dev_priv =to_i915 (state->crtc->dev); +struct intel_crtc_state *intel_state =to_intel_crtc_state (state); +enum pipe pipe =to_intel_crtc (state->crtc)->pipe; + const uint32_t lut_size = INTEL_INFO(dev_priv)-color.degamma_lut_size;
drivers/gpu/drm/i915/intel_color.c static void glk_load_degamma_lut(struct drm_crtc_state *state)
Quoted 9 lines
drivers/gpu/drm/i915/intel_color.c +9
-0+uint32_t i; + +/* +* When setting the auto-increment bit, the hardware seems to +* ignore the index bits, so we need to reset it to index 0 +* separately. +*/ +I915_WRITE (PRE_CSC_GAMC_INDEX (pipe),0 ); + I915_WRITE(PRE_CSC_GAMC_INDEX(pipe),
PRE_CSC_GAMC_AUTO_INCREMENT);Quoted 4 lines
drivers/gpu/drm/i915/intel_color.c +4
-0+ +if (state->degamma_lut) { +struct drm_color_lut *lut = + (struct drm_color_lut *) state->degamma_lut->data;drivers/gpu/drm/i915/intel_color.c static void glk_load_degamma_lut(struct drm_crtc_state *state) · line 558
Quoted 10 lines
drivers/gpu/drm/i915/intel_color.c +10
-0+for (i =0 ; i < lut_size; i++) { +/* +* First 33 entries represent range from 0 to 1.0 +* 34th and 35th entry will represent extended range +* inputs 3.0 and 7.0 respectively, currently clamped +* at 1.0. +* ToDo: Extend to max 7.0. +*/ +uint32_t word = +drm_color_lut_extract (lut[i].red,16 );A few minor things I notice; not sure if you want to bother addressing them at the moment or not, but I figured I'd point them out now:
Quoted 3 lines
* Technically we could just set word directly to lut[i].red since we're extracting the full 16-bits (so no rounding) and our u16 input can't hold any value outside our clamping range of [0,0.99998].
Yes, it's practically NOOP here. Will update this.
Quoted 5 lines
* It's a minor deviation, but the scaling is slightly off here such that the 33rd entry written by this loop (which represents a 1.0 input) will be clamped to
0xFFFF(0.99998) rather than 1.0. So userspace won't be able to exactly match the linear table we'd otherwise program if no userspace LUT was provided.
Yes, with the current data structure definition of lut (16bit entries), its not possible for userspace to send exact 1.0 (which will require 17bits). We need to use extended structure in order to get over this corner case and also to handle extended range 3.0 and 7.0 etc. I tried to introduce that as part of "drm: Add Enhanced Gamma LUT precision structure" patch in series
https://patchwork.freedesktop.org/series/30875/
We need to use above extension to get over this corner case.
Quoted 11 lines
* GLK and gen11 deviate from our other platforms in that they just use a single value for red, green, and blue rather than accepting separate values for each. GLK punts on this and doesn't even expose degamma to userspace (just loads a linear table), whereas your patch silently ignores green/blue values, which might be a surprise to userspace. Maybe we should switch GLK code to do what you do here, but also add some validation of new table blobs during atomic-check such that we reject any table with non-equal values for r/g/b. While we're at it, we could also check to ensure that LUT entries are never decreasing, since that's also a hardware requirement documented in the bspec.
Ok sure, I will add that check to make sure userspace requests for non-equal R, G and B components is not allowed and user is aware that hardware expects equal LUT values for each component.
Thanks Matt for your useful comments and inputs.
Regards,
Uma Shankar
Quoted 56 lines
Matt
Quoted 53 lines
drivers/gpu/drm/i915/intel_color.c +17
-0+I915_WRITE (PRE_CSC_GAMC_DATA (pipe), word); + } + }else { +/* load a linear table. */ +for (i =0 ; i < lut_size; i++) { +uint32_t v = (i * (1 <<16 )) / (lut_size -1 ); + +I915_WRITE (PRE_CSC_GAMC_DATA (pipe), v); + } + } + + intel_state->gamma_mode |=PRE_CSC_GAMMA_ENABLE ; + +/* Clamp values > 1.0. */ +while (i++ <35 ) +I915_WRITE (PRE_CSC_GAMC_DATA (pipe), (1 <<16 )); } +static void glk_load_luts (struct drm_crtc_state *state) { struct drm_crtc *crtc = state->crtc; @@ -606,6 +657,26 @@ staticvoid
cherryview_load_luts(struct drm_crtc_state *state)drivers/gpu/drm/i915/intel_color.c +18
-0i9xx_load_luts_internal (crtc,NULL ,to_intel_crtc_state (state)); } +static void icl_load_luts (struct drm_crtc_state *state) { +struct drm_crtc *crtc = state->crtc; +struct drm_device *dev = crtc->dev; +struct drm_i915_private *dev_priv =to_i915 (dev); +struct intel_crtc_state *intel_state =to_intel_crtc_state (state); +enum pipe pipe =to_intel_crtc (crtc)->pipe; + +if (crtc_state_is_legacy_gamma (state)) { +haswell_load_luts (state); +return ; + } + +icl_load_degamma_lut (state); +bdw_load_gamma_lut (state,0 ); + + intel_state->gamma_mode |=GAMMA_MODE_MODE_10BIT ; +I915_WRITE (GAMMA_MODE (pipe), intel_state->gamma_mode); } +void intel_color_load_luts (struct drm_crtc_state *crtc_state) { struct drm_device *dev = crtc_state->crtc->dev; @@ -662,6 +733,8 @@void
intel_color_init(struct drm_crtc *crtc)drivers/gpu/drm/i915/intel_color.c +2
-1}else if (IS_GEMINILAKE (dev_priv) ||IS_CANNONLAKE (dev_priv)) { dev_priv->display.load_csc_matrix = ilk_load_csc_matrix; dev_priv->display.load_luts = glk_load_luts; + }else if (IS_ICELAKE (dev_priv)) { + dev_priv->display.load_luts = icl_load_luts; }else { dev_priv->display.load_luts = i9xx_load_luts; } --1.9.1
Quoted 8 lines
Quoted 1 line
--
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 2/3 drm/i915/icl: Enable ICL Pipe CSC block
In reply to Uma ShankarEnable ICL pipe csc hardware. CSC block is enabled in CSC_MODE register instead of PLANE_COLOR_CTL.
v2: Addressed Maarten's review comments.
v3: Addressed Matt's review comments. Removed rmw patterns as suggested by Matt.
--- drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_color.c | 28 +++++++++++++++++++++++----- drivers/gpu/drm/i915/intel_drv.h | 3 +++ 3 files changed, 28 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
@@ -9824,6 +9824,8 @@ enum skl_power_gate {#define _PIPE_A_CSC_COEFF_RV_GV 0x49020#define _PIPE_A_CSC_COEFF_BV 0x49024#define _PIPE_A_CSC_MODE 0x49028 +#define CSC_ENABLE (1 << 31) +#define OUTPUT_CSC_ENABLE (1 << 30)#define CSC_BLACK_SCREEN_OFFSET (1 << 2)#define CSC_POSITION_BEFORE_GAMMA (1 << 1)#define CSC_MODE_YUV_TO_RGB (1 << 0)
drivers/gpu/drm/i915/intel_color.c +23 -5
@@ -108,10 +108,14 @@ static u64 *ctm_mult_by_limited(u64 *result, const u64 *input)return result; } -static void ilk_load_ycbcr_conversion_matrix (struct intel_crtc *intel_crtc) +static void ilk_load_ycbcr_conversion_matrix (struct drm_crtc_state *crtc_state) { +struct drm_crtc *crtc = crtc_state->crtc; +struct drm_i915_private *dev_priv =to_i915 (crtc->dev); +struct intel_crtc *intel_crtc =to_intel_crtc (crtc);int pipe = intel_crtc->pipe; -struct drm_i915_private *dev_priv =to_i915 (intel_crtc->base.dev); +struct intel_crtc_state *intel_crtc_state = +to_intel_crtc_state (crtc_state);I915_WRITE (PIPE_CSC_PREOFF_HI (pipe),0 );I915_WRITE (PIPE_CSC_PREOFF_ME (pipe),0 );
@@ -129,7 +133,11 @@ static void ilk_load_ycbcr_conversion_matrix(struct intel_crtc *intel_crtc)I915_WRITE (PIPE_CSC_POSTOFF_HI (pipe),POSTOFF_RGB_TO_YUV_HI );I915_WRITE (PIPE_CSC_POSTOFF_ME (pipe),POSTOFF_RGB_TO_YUV_ME );I915_WRITE (PIPE_CSC_POSTOFF_LO (pipe),POSTOFF_RGB_TO_YUV_LO ); -I915_WRITE (PIPE_CSC_MODE (pipe),0 ); + +if (INTEL_GEN (dev_priv) >=11 ) + intel_crtc_state->csc_mode |=CSC_ENABLE ; +else + intel_crtc_state->csc_mode =0 ; }static void ilk_load_csc_matrix (struct drm_crtc_state *crtc_state)
@@ -151,7 +159,7 @@ static void ilk_load_csc_matrix(struct drm_crtc_state *crtc_state)if (intel_crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 || intel_crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR444 ) { -ilk_load_ycbcr_conversion_matrix (intel_crtc); +ilk_load_ycbcr_conversion_matrix (crtc_state);return ; }else if (crtc_state->ctm) {struct drm_color_ctm *ctm = crtc_state->ctm->data;
@@ -239,7 +247,10 @@ static void ilk_load_csc_matrix(struct drm_crtc_state *crtc_state)I915_WRITE (PIPE_CSC_POSTOFF_ME (pipe), postoff);I915_WRITE (PIPE_CSC_POSTOFF_LO (pipe), postoff); -I915_WRITE (PIPE_CSC_MODE (pipe),0 ); +if (INTEL_GEN (dev_priv) >=11 ) + intel_crtc_state->csc_mode |=CSC_ENABLE ; +else + intel_crtc_state->csc_mode =0 ; }else {uint32_t mode =CSC_MODE_YUV_TO_RGB ;
@@ -305,9 +316,15 @@ void intel_color_set_csc(struct drm_crtc_state *crtc_state) {struct drm_device *dev = crtc_state->crtc->dev;struct drm_i915_private *dev_priv =to_i915 (dev); +struct intel_crtc *intel_crtc =to_intel_crtc (crtc_state->crtc); +struct intel_crtc_state *intel_crtc_state = +to_intel_crtc_state (crtc_state); +enum pipe pipe = intel_crtc->pipe;if (dev_priv->display.load_csc_matrix) dev_priv->display.load_csc_matrix (crtc_state); + +I915_WRITE (PIPE_CSC_MODE (pipe), intel_crtc_state->csc_mode); }/* Loads the legacy palette/gamma unit for the CRTC. */
@@ -734,6 +751,7 @@ void intel_color_init(struct drm_crtc *crtc) dev_priv->display.load_csc_matrix = ilk_load_csc_matrix; dev_priv->display.load_luts = glk_load_luts; }else if (IS_ICELAKE (dev_priv)) { + dev_priv->display.load_csc_matrix = ilk_load_csc_matrix; dev_priv->display.load_luts = icl_load_luts; }else { dev_priv->display.load_luts = i9xx_load_luts;
drivers/gpu/drm/i915/intel_drv.h +3 -0
@@ -922,6 +922,9 @@ struct intel_crtc_state {/* Gamma mode programmed on the pipe */ uint32_t gamma_mode; +/* CSC mode programmed on the pipe */ +uint32_t csc_mode; +/* bitmask of visible planes (enum plane_id) */ u8 active_planes;u8 nv12_planes;
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [v3 2/3] drm/i915/icl: Enable ICL Pipe CSC block
Quoted 33 lines · Uma Shankar
Enable ICL pipe csc hardware. CSC block is enabled in
CSC_MODEregister instead ofPLANE_COLOR_CTL.v2: Addressed Maarten's review comments.
v3: Addressed Matt's review comments. Removed rmw patterns as suggested by Matt.
Signed-off-by Uma Shankar <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_color.c | 28 +++++++++++++++++++++++----- drivers/gpu/drm/i915/intel_drv.h | 3 +++ 3 files changed, 28 insertions(+), 5 deletions(-)drivers/gpu/drm/i915/i915_reg.h +2
-0@@ -9824,6 +9824,8 @@ enum skl_power_gate {#define _PIPE_A_CSC_COEFF_RV_GV 0x49020#define _PIPE_A_CSC_COEFF_BV 0x49024#define _PIPE_A_CSC_MODE 0x49028 +#define CSC_ENABLE (1 << 31) +#define OUTPUT_CSC_ENABLE (1 << 30)#define CSC_BLACK_SCREEN_OFFSET (1 << 2)#define CSC_POSITION_BEFORE_GAMMA (1 << 1)#define CSC_MODE_YUV_TO_RGB (1 << 0)drivers/gpu/drm/i915/intel_color.c +0
-0
drivers/gpu/drm/i915/intel_color.c static u64 *ctm_mult_by_limited(u64 *result, const u64 *input) · line 111
Quoted 5 lines
drivers/gpu/drm/i915/intel_color.c +1
-1@@ -108,10 +108,14 @@ static u64 *ctm_mult_by_limited(u64 *result, const u64 *input)return result; } -static void ilk_load_ycbcr_conversion_matrix (struct intel_crtc *intel_crtc) +static void ilk_load_ycbcr_conversion_matrix (struct drm_crtc_state *crtc_state)
It's generally preferred to use Intel types for these lower-level functions rather than DRM types. It looks like a lot of the preexisting color management code breaks from this convention, so we might want to also clean that up in the preexisting code as a separate patch.
Quoted 12 lines
drivers/gpu/drm/i915/intel_color.c +5
-1{ +struct drm_crtc *crtc = crtc_state->crtc; +struct drm_i915_private *dev_priv =to_i915 (crtc->dev); +struct intel_crtc *intel_crtc =to_intel_crtc (crtc);int pipe = intel_crtc->pipe; -struct drm_i915_private *dev_priv =to_i915 (intel_crtc->base.dev); +struct intel_crtc_state *intel_crtc_state = +to_intel_crtc_state (crtc_state);I915_WRITE (PIPE_CSC_PREOFF_HI (pipe),0 );I915_WRITE (PIPE_CSC_PREOFF_ME (pipe),0 );
drivers/gpu/drm/i915/intel_color.c static void ilk_load_ycbcr_conversion_matrix(struct intel_crtc *intel_crtc) · line 138
Quoted 7 lines
drivers/gpu/drm/i915/intel_color.c +3
-1@@ -129,7 +133,11 @@ static void ilk_load_ycbcr_conversion_matrix(struct intel_crtc *intel_crtc)I915_WRITE (PIPE_CSC_POSTOFF_HI (pipe),POSTOFF_RGB_TO_YUV_HI );I915_WRITE (PIPE_CSC_POSTOFF_ME (pipe),POSTOFF_RGB_TO_YUV_ME );I915_WRITE (PIPE_CSC_POSTOFF_LO (pipe),POSTOFF_RGB_TO_YUV_LO ); -I915_WRITE (PIPE_CSC_MODE (pipe),0 ); + +if (INTEL_GEN (dev_priv) >=11 ) + intel_crtc_state->csc_mode |=CSC_ENABLE ;
Shouldn't fixed RGB->YUV be done with OUTPUT_CSC_ENABLE now that we have two CSC's to work with instead of just one? I.e., I think we can leave the first pipe CSC for the userspace-defined transformation (or identity if none is provided) and then enable the output CSC if we need to convert to YUV and/or compress to limited range.
Matt
Quoted 67 lines
drivers/gpu/drm/i915/intel_color.c +14
-2+else + intel_crtc_state->csc_mode =0 ; }static void ilk_load_csc_matrix (struct drm_crtc_state *crtc_state)@@ -151,7 +159,7 @@ static void ilk_load_csc_matrix(struct drm_crtc_state *crtc_state)if (intel_crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR420 || intel_crtc_state->output_format ==INTEL_OUTPUT_FORMAT_YCBCR444 ) { -ilk_load_ycbcr_conversion_matrix (intel_crtc); +ilk_load_ycbcr_conversion_matrix (crtc_state);return ; }else if (crtc_state->ctm) {struct drm_color_ctm *ctm = crtc_state->ctm->data;@@ -239,7 +247,10 @@ static void ilk_load_csc_matrix(struct drm_crtc_state *crtc_state)I915_WRITE (PIPE_CSC_POSTOFF_ME (pipe), postoff);I915_WRITE (PIPE_CSC_POSTOFF_LO (pipe), postoff); -I915_WRITE (PIPE_CSC_MODE (pipe),0 ); +if (INTEL_GEN (dev_priv) >=11 ) + intel_crtc_state->csc_mode |=CSC_ENABLE ; +else + intel_crtc_state->csc_mode =0 ; }else {uint32_t mode =CSC_MODE_YUV_TO_RGB ;@@ -305,9 +316,15 @@ void intel_color_set_csc(struct drm_crtc_state *crtc_state) {struct drm_device *dev = crtc_state->crtc->dev;struct drm_i915_private *dev_priv =to_i915 (dev); +struct intel_crtc *intel_crtc =to_intel_crtc (crtc_state->crtc); +struct intel_crtc_state *intel_crtc_state = +to_intel_crtc_state (crtc_state); +enum pipe pipe = intel_crtc->pipe;if (dev_priv->display.load_csc_matrix) dev_priv->display.load_csc_matrix (crtc_state); + +I915_WRITE (PIPE_CSC_MODE (pipe), intel_crtc_state->csc_mode); }/* Loads the legacy palette/gamma unit for the CRTC. */ @@ -734,6 +751,7 @@ void intel_color_init(struct drm_crtc *crtc) dev_priv->display.load_csc_matrix = ilk_load_csc_matrix; dev_priv->display.load_luts = glk_load_luts; }else if (IS_ICELAKE (dev_priv)) { + dev_priv->display.load_csc_matrix = ilk_load_csc_matrix; dev_priv->display.load_luts = icl_load_luts; }else { dev_priv->display.load_luts = i9xx_load_luts;drivers/gpu/drm/i915/intel_drv.h +3
-0@@ -922,6 +922,9 @@ struct intel_crtc_state {/* Gamma mode programmed on the pipe */ uint32_t gamma_mode; +/* CSC mode programmed on the pipe */ +uint32_t csc_mode; +/* bitmask of visible planes (enum plane_id) */ u8 active_planes;u8 nv12_planes;Signature · 1 line
1.9.1
Signature · 9 lines
Matt Roper Graphics Software Engineer IoTG Platform Enabling & Development Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 3/3 drm/i915/icl: Add degamma and gamma lut size to gen11 caps
In reply to Uma ShankarAdd the degamma and gamma lut sizes to gen11 capability structure.
v2: Reorder the patch as per Maarten's suggestion.
v3: Rebase
--- drivers/gpu/drm/i915/i915_pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_pci.c +2 -1
@@ -624,7 +624,8 @@ }, \ GEN(11), \ .ddb_size = 2048, \ - .has_logical_ring_elsq = 1 + .has_logical_ring_elsq = 1, \ + .color = { .degamma_lut_size = 33, .gamma_lut_size = 1024 }static const struct intel_device_info intel_icelake_11_info = {GEN11_FEATURES ,
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [v3 3/3] drm/i915/icl: Add degamma and gamma lut size to gen11 caps
Quoted 2 lines · Uma Shankar
Add the degamma and gamma lut sizes to gen11 capability structure.
I'd add a comment to the commit message indicating that this doesn't account for the extended range gamma entries and that we'll wait to address those (probably with some kind of new segmented gamma ABI) in a future patch.
Matt
Quoted 27 lines
v2: Reorder the patch as per Maarten's suggestion.
v3: Rebase
Signed-off-by Uma Shankar <[email protected]>--- drivers/gpu/drm/i915/i915_pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/i915_pci.c +2
-1@@ -624,7 +624,8 @@ }, \ GEN(11), \ .ddb_size = 2048, \ - .has_logical_ring_elsq = 1 + .has_logical_ring_elsq = 1, \ + .color = { .degamma_lut_size = 33, .gamma_lut_size = 1024 }static const struct intel_device_info intel_icelake_11_info = {GEN11_FEATURES ,Signature · 1 line
1.9.1
Signature · 9 lines
Matt Roper Graphics Software Engineer IoTG Platform Enabling & Development Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for Add support for Gen 11 pipe color features (rev3)
In reply to Uma Shankar== Series Details ==
== Series Details ==
Series: Add support for Gen 11 pipe color features (rev3)
URL : https://patchwork.freedesktop.org/series/51408/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 1427600ab4e5 drm/i915/icl: Add icl pipe degamma and gamma support -:74: CHECK:SPACING: No space is necessary after a cast #74: FILE: drivers/gpu/drm/i915/intel_color.c:548: + (struct drm_color_lut *) state->degamma_lut->data;
total: 0 errors, 0 warnings, 1 checks, 112 lines checked 5a32a67a4649 drm/i915/icl: Enable ICL Pipe CSC block 653e346a63d4 drm/i915/icl: Add degamma and gamma lut size to gen11 caps
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for Add support for Gen 11 pipe color features (rev3)
In reply to Uma Shankar== Series Details ==
== Series Details ==
Series: Add support for Gen 11 pipe color features (rev3)
URL : https://patchwork.freedesktop.org/series/51408/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5222 -> Patchwork_10957
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/51408/revisions/3/mbox/
Known issues
------------
Here are the changes found in Patchwork_10957 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a-frame-sequence:
- fi-byt-clapper: PASS -> FAIL [fdo#103191] / [fdo#107362]
* {igt@runner@aborted}:
- {fi-icl-y}: NOTRUN -> FAIL [fdo#108070]
#### Possible fixes ####
* igt@gem_mmap_gtt@basic:
- fi-glk-dsi: INCOMPLETE [fdo#103359] / [k.org#198133] -> PASS
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#108070]: https://bugs.freedesktop.org/show_bug.cgi?id=108070
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133
Participating hosts (49 -> 44)
------------------------------
Additional (1): fi-icl-y
Missing (6): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600
Build changes
-------------
* Linux: CI_DRM_5222 -> Patchwork_10957
CI_DRM_5222: a6f85043a0ca86eb0072e69bf92b77f7d9d6d5d5 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4735: b05c028ccdb6ac8e8d8499a041bb14dfe358ee26 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10957: 653e346a63d4c9f5d2d2e559ed0b73ea3cce7029 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
653e346a63d4 drm/i915/icl: Add degamma and gamma lut size to gen11 caps 5a32a67a4649 drm/i915/icl: Enable ICL Pipe CSC block 1427600ab4e5 drm/i915/icl: Add icl pipe degamma and gamma support
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10957/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for Add support for Gen 11 pipe color features (rev3)
In reply to Uma Shankar== Series Details ==
== Series Details ==
Series: Add support for Gen 11 pipe color features (rev3)
URL : https://patchwork.freedesktop.org/series/51408/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5222_full -> Patchwork_10957_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_10957_full:
### IGT changes ###
#### Possible regressions ####
* igt@kms_color@pipe-b-gamma:
- {shard-iclb}: SKIP -> FAIL +11
#### Warnings ####
* igt@kms_color@pipe-b-ctm-green-to-red:
- {shard-iclb}: SKIP -> PASS +19
Known issues
------------
Here are the changes found in Patchwork_10957_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_schedule@pi-ringfull-blt:
- shard-skl: NOTRUN -> FAIL [fdo#103158]
* igt@kms_busy@extended-modeset-hang-newfb-render-a:
- shard-skl: NOTRUN -> DMESG-WARN [fdo#107956] +2
* igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-b:
- shard-apl: PASS -> DMESG-WARN [fdo#107956]
* igt@kms_chv_cursor_fail@pipe-b-256x256-right-edge:
- {shard-iclb}: PASS -> DMESG-WARN [fdo#107724] / [fdo#108336] +3
* igt@kms_cursor_crc@cursor-256x85-random:
- shard-glk: PASS -> FAIL [fdo#103232] +1
* igt@kms_cursor_crc@cursor-64x64-sliding:
- shard-apl: PASS -> FAIL [fdo#103232]
* igt@kms_draw_crc@draw-method-rgb565-mmap-cpu-ytiled:
- {shard-iclb}: PASS -> WARN [fdo#108336]
* igt@kms_fbcon_fbt@psr-suspend:
- shard-skl: NOTRUN -> FAIL [fdo#107882]
* igt@kms_flip@flip-vs-fences:
- {shard-iclb}: PASS -> DMESG-WARN [fdo#107724] +14
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-move:
- shard-apl: PASS -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbc-1p-rte:
- shard-glk: PASS -> FAIL [fdo#103167] / [fdo#105682]
- shard-apl: PASS -> FAIL [fdo#103167] / [fdo#105682]
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-cur-indfb-draw-mmap-cpu:
- shard-glk: PASS -> FAIL [fdo#103167] +3
* igt@kms_frontbuffer_tracking@fbc-farfromfence:
- shard-skl: PASS -> FAIL [fdo#103167] +2
* igt@kms_frontbuffer_tracking@fbc-shrfb-scaledprimary:
- shard-skl: PASS -> FAIL [fdo#105682]
* igt@kms_frontbuffer_tracking@fbcpsr-farfromfence:
- {shard-iclb}: PASS -> DMESG-FAIL [fdo#107724] +1
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-spr-indfb-fullscreen:
- {shard-iclb}: PASS -> FAIL [fdo#103167] +4
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
- {shard-iclb}: PASS -> INCOMPLETE [fdo#107713]
* igt@kms_plane@pixel-format-pipe-c-planes:
- shard-skl: NOTRUN -> DMESG-WARN [fdo#106885]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-b-planes:
- shard-skl: PASS -> INCOMPLETE [fdo#104108] / [fdo#107773]
* igt@kms_plane@plane-position-covered-pipe-a-planes:
- {shard-iclb}: PASS -> FAIL [fdo#103166]
* igt@kms_plane_alpha_blend@pipe-a-constant-alpha-max:
- shard-skl: NOTRUN -> FAIL [fdo#108145] +1
* igt@kms_plane_multiple@atomic-pipe-a-tiling-y:
- shard-glk: PASS -> FAIL [fdo#103166] +2
* igt@kms_setmode@basic:
- shard-skl: NOTRUN -> FAIL [fdo#99912]
* igt@pm_backlight@fade_with_suspend:
- shard-skl: NOTRUN -> FAIL [fdo#107847]
* igt@pm_rpm@modeset-lpsp-stress-no-wait:
- shard-skl: PASS -> INCOMPLETE [fdo#107807]
* igt@pm_rpm@system-suspend-execbuf:
- {shard-iclb}: PASS -> INCOMPLETE [fdo#107713] / [fdo#108840]
* igt@pm_rpm@universal-planes:
- {shard-iclb}: PASS -> DMESG-WARN [fdo#108654] / [fdo#108756]
* {igt@runner@aborted}:
- {shard-iclb}: NOTRUN -> FAIL [fdo#108756]
* igt@syncobj_wait@multi-wait-for-submit-unsubmitted-signaled:
- shard-snb: PASS -> INCOMPLETE [fdo#105411]
#### Possible fixes ####
* igt@drm_import_export@import-close-race-flink:
- shard-skl: TIMEOUT [fdo#108667] -> PASS
* igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels:
- {shard-iclb}: DMESG-WARN [fdo#107724] -> PASS +13
* igt@kms_color@pipe-b-degamma:
- shard-apl: FAIL [fdo#104782] -> PASS
* igt@kms_cursor_crc@cursor-128x128-random:
- shard-apl: FAIL [fdo#103232] -> PASS +2
* igt@kms_cursor_crc@cursor-128x128-suspend:
- shard-apl: FAIL [fdo#103191] / [fdo#103232] -> PASS +1
* igt@kms_cursor_crc@cursor-128x42-random:
- shard-glk: FAIL [fdo#103232] -> PASS
* igt@kms_cursor_crc@cursor-256x256-offscreen:
- shard-skl: FAIL [fdo#103232] -> PASS
* igt@kms_cursor_crc@cursor-256x256-random:
- {shard-iclb}: FAIL [fdo#103232] -> PASS +18
* igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
- shard-glk: FAIL [fdo#105363] -> PASS
* igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-indfb-draw-mmap-gtt:
- {shard-iclb}: DMESG-FAIL [fdo#107724] -> PASS +3
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render:
- shard-apl: FAIL [fdo#103167] -> PASS +2
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-blt:
- {shard-iclb}: FAIL [fdo#103167] -> PASS
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-onoff:
- shard-glk: FAIL [fdo#103167] -> PASS +3
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-shrfb-draw-render:
- {shard-iclb}: DMESG-WARN [fdo#107724] / [fdo#108336] -> PASS +4
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-c-planes:
- {shard-iclb}: DMESG-FAIL [fdo#103166] / [fdo#107724] -> PASS
* igt@kms_plane_multiple@atomic-pipe-a-tiling-y:
- {shard-iclb}: FAIL [fdo#103166] -> PASS +1
* igt@kms_psr@suspend:
- {shard-iclb}: INCOMPLETE [fdo#107713] -> PASS
* igt@pm_rpm@legacy-planes:
- shard-skl: INCOMPLETE [fdo#105959] / [fdo#107807] -> PASS
#### Warnings ####
* igt@kms_ccs@pipe-b-crc-sprite-planes-basic:
- {shard-iclb}: FAIL [fdo#107725] -> DMESG-WARN [fdo#107724] / [fdo#108336]
* igt@kms_cursor_crc@cursor-128x42-sliding:
- {shard-iclb}: FAIL [fdo#103232] -> DMESG-WARN [fdo#107724] / [fdo#108336]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-spr-indfb-fullscreen:
- {shard-iclb}: FAIL [fdo#103167] -> DMESG-FAIL [fdo#107724]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103158]: https://bugs.freedesktop.org/show_bug.cgi?id=103158
[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#104108]: https://bugs.freedesktop.org/show_bug.cgi?id=104108
[fdo#104782]: https://bugs.freedesktop.org/show_bug.cgi?id=104782
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#105682]: https://bugs.freedesktop.org/show_bug.cgi?id=105682
[fdo#105959]: https://bugs.freedesktop.org/show_bug.cgi?id=105959
[fdo#106885]: https://bugs.freedesktop.org/show_bug.cgi?id=106885
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#107725]: https://bugs.freedesktop.org/show_bug.cgi?id=107725
[fdo#107773]: https://bugs.freedesktop.org/show_bug.cgi?id=107773
[fdo#107807]: https://bugs.freedesktop.org/show_bug.cgi?id=107807
[fdo#107847]: https://bugs.freedesktop.org/show_bug.cgi?id=107847
[fdo#107882]: https://bugs.freedesktop.org/show_bug.cgi?id=107882
[fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108336]: https://bugs.freedesktop.org/show_bug.cgi?id=108336
[fdo#108654]: https://bugs.freedesktop.org/show_bug.cgi?id=108654
[fdo#108667]: https://bugs.freedesktop.org/show_bug.cgi?id=108667
[fdo#108756]: https://bugs.freedesktop.org/show_bug.cgi?id=108756
[fdo#108840]: https://bugs.freedesktop.org/show_bug.cgi?id=108840
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (7 -> 7)
------------------------------
No changes in participating hosts
Build changes
-------------
* Linux: CI_DRM_5222 -> Patchwork_10957
CI_DRM_5222: a6f85043a0ca86eb0072e69bf92b77f7d9d6d5d5 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4735: b05c028ccdb6ac8e8d8499a041bb14dfe358ee26 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10957: 653e346a63d4c9f5d2d2e559ed0b73ea3cce7029 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10957/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx