configure: Force the C standard to gnu11
PATCH 1/1 configure: Force the C standard to gnu11
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
--- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
configure +4 -1
@@ -107,6 +107,9 @@ update_cxxflags() { -Wstrict-prototypes|-Wmissing-prototypes|-Wnested-externs|\ -Wold-style-declaration|-Wold-style-definition|-Wredundant-decls) ;; + -std=gnu11) + QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }-std=gnu++11 + ;; *) QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }$arg ;;
@@ -585,7 +588,7 @@ ARFLAGS="${ARFLAGS-rv}" # left shift of signed integers is well defined and has the expected # 2s-complement style results. (Both clang and gcc agree that it # provides these semantics.) -QEMU_CFLAGS="-fno-strict-aliasing -fno-common -fwrapv $QEMU_CFLAGS" +QEMU_CFLAGS="-fno-strict-aliasing -fno-common -fwrapv -std=gnu11 $QEMU_CFLAGS" QEMU_CFLAGS="-Wall -Wundef -Wwrite-strings -Wmissing-prototypes $QEMU_CFLAGS" QEMU_CFLAGS="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS" QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS"
Signature · 1 line
1.8.3.1
Quoted 5 lines · Thomas Huth
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 8 lines
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
In 4.x gnu11 is marked as experimental. I'm not really comfortable
using experimental features - even if its warning free there's a risk it would silently mis-compile something.
gnu99 is ok with 4.x - it is merely "incomplete".
Quoted 32 lines
Signed-off-by Thomas Huth <[email protected]>--- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)configure +4
-1@@ -107,6 +107,9 @@ update_cxxflags() { -Wstrict-prototypes|-Wmissing-prototypes|-Wnested-externs|\ -Wold-style-declaration|-Wold-style-definition|-Wredundant-decls) ;; + -std=gnu11) + QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }-std=gnu++11 + ;; *) QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }$arg ;;@@ -585,7 +588,7 @@ ARFLAGS="${ARFLAGS-rv}" # left shift of signed integers is well defined and has the expected # 2s-complement style results. (Both clang and gcc agree that it # provides these semantics.) -QEMU_CFLAGS="-fno-strict-aliasing -fno-common -fwrapv $QEMU_CFLAGS" +QEMU_CFLAGS="-fno-strict-aliasing -fno-common -fwrapv -std=gnu11 $QEMU_CFLAGS" QEMU_CFLAGS="-Wall -Wundef -Wwrite-strings -Wmissing-prototypes $QEMU_CFLAGS" QEMU_CFLAGS="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS" QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS"Signature · 1 line
1.8.3.1
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 15 lines · Daniel P. Berrangé
Quoted 5 lines · Thomas Huth
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 8 lines
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
Quoted 5 lines
In 4.x gnu11 is marked as experimental. I'm not really comfortable
using experimental features - even if its warning free there's a risk it would silently mis-compile something.gnu99 is ok with 4.x - it is merely "incomplete".
gnu11 has the big advantage that it also fixes the problem with duplicated typedefs that are reported by older versions of Clang.
Are you sure about the experimental character in 4.x? I just looked at
https://gcc.gnu.org/onlinedocs/gcc-4.8.5/gcc/Standards.html and it says:
"A fourth version of the C standard, known as C11, was published in 2011 as ISO/IEC 9899:2011. GCC has limited incomplete support for parts of this standard, enabled with -std=c11 or -std=iso9899:2011."
It does not say anything about "experimental" there. The word "experimental" is only used for the C++ support, but we hardly have C++ code in QEMU -- if you worry about that, I could simply drop the "-std=gnu++11" part from my patch?
Thomas
Quoted 28 lines · Thomas Huth
Quoted 15 lines · Daniel P. Berrangé
Quoted 5 lines · Thomas Huth
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 8 lines
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
Quoted 5 lines
In 4.x gnu11 is marked as experimental. I'm not really comfortable
using experimental features - even if its warning free there's a risk it would silently mis-compile something.gnu99 is ok with 4.x - it is merely "incomplete".
gnu11 has the big advantage that it also fixes the problem with duplicated typedefs that are reported by older versions of Clang.
Are you sure about the experimental character in 4.x? I just looked at
https://gcc.gnu.org/onlinedocs/gcc-4.8.5/gcc/Standards.html and it says:
Quoted 8 lines
"A fourth version of the C standard, known as C11, was published in 2011 as ISO/IEC 9899:2011. GCC has limited incomplete support for parts of this standard, enabled with -std=c11 or -std=iso9899:2011."
It does not say anything about "experimental" there. The word "experimental" is only used for the C++ support, but we hardly have C++ code in QEMU -- if you worry about that, I could simply drop the "-std=gnu++11" part from my patch?
I was looking at the "info gcc" docs on RHEL7, gcc-4.8.5-16.el7_4.1.x86_64:
"3.4 Options Controlling C Dialect
....snip...
'c11'
'c1x'
'iso9899:2011'
ISO C11, the 2011 revision of the ISO C standard. Support is
incomplete and experimental. The name 'c1x' is deprecated.
....snip...
'gnu11'
'gnu1x'
GNU dialect of ISO C11. Support is incomplete and
experimental. The name 'gnu1x' is deprecated."Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 40 lines · Daniel P. Berrangé
Quoted 28 lines · Thomas Huth
Quoted 15 lines · Daniel P. Berrangé
Quoted 5 lines · Thomas Huth
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 8 lines
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
Quoted 5 lines
In 4.x gnu11 is marked as experimental. I'm not really comfortable
using experimental features - even if its warning free there's a risk it would silently mis-compile something.gnu99 is ok with 4.x - it is merely "incomplete".
gnu11 has the big advantage that it also fixes the problem with duplicated typedefs that are reported by older versions of Clang.
Are you sure about the experimental character in 4.x? I just looked at
https://gcc.gnu.org/onlinedocs/gcc-4.8.5/gcc/Standards.html and it says:Quoted 8 lines
"A fourth version of the C standard, known as C11, was published in 2011 as ISO/IEC 9899:2011. GCC has limited incomplete support for parts of this standard, enabled with -std=c11 or -std=iso9899:2011."
It does not say anything about "experimental" there. The word "experimental" is only used for the C++ support, but we hardly have C++ code in QEMU -- if you worry about that, I could simply drop the "-std=gnu++11" part from my patch?
I was looking at the "info gcc" docs on RHEL7, gcc-4.8.5-16.el7_4.1.x86_64:
Quoted 8 lines
"3.4 Options Controlling C Dialect
....snip... 'gnu11' 'gnu1x' GNU dialect of ISO C11. Support is incomplete and experimental. The name 'gnu1x' is deprecated."
Ok. Looks like the "Support is incomplete and experimental" sentence has been removed with GCC 4.9.0 here. So GCC 4.8 is likely pretty close already. IMHO we could give it a try and enable gnu11 for QEMU with GCC v4.8, too. If we later find problems, we could still switch back to gnu99 instead. Other opinions?
Thomas
Quoted 50 lines · Thomas Huth
Quoted 40 lines · Daniel P. Berrangé
Quoted 28 lines · Thomas Huth
Quoted 15 lines · Daniel P. Berrangé
Quoted 5 lines · Thomas Huth
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 8 lines
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
Quoted 5 lines
In 4.x gnu11 is marked as experimental. I'm not really comfortable
using experimental features - even if its warning free there's a risk it would silently mis-compile something.gnu99 is ok with 4.x - it is merely "incomplete".
gnu11 has the big advantage that it also fixes the problem with duplicated typedefs that are reported by older versions of Clang.
Are you sure about the experimental character in 4.x? I just looked at
https://gcc.gnu.org/onlinedocs/gcc-4.8.5/gcc/Standards.html and it says:Quoted 8 lines
"A fourth version of the C standard, known as C11, was published in 2011 as ISO/IEC 9899:2011. GCC has limited incomplete support for parts of this standard, enabled with -std=c11 or -std=iso9899:2011."
It does not say anything about "experimental" there. The word "experimental" is only used for the C++ support, but we hardly have C++ code in QEMU -- if you worry about that, I could simply drop the "-std=gnu++11" part from my patch?
I was looking at the "info gcc" docs on RHEL7, gcc-4.8.5-16.el7_4.1.x86_64:
Quoted 8 lines
"3.4 Options Controlling C Dialect
....snip... 'gnu11' 'gnu1x' GNU dialect of ISO C11. Support is incomplete and experimental. The name 'gnu1x' is deprecated."
Quoted 5 lines
Ok. Looks like the "Support is incomplete and experimental" sentence has been removed with GCC 4.9.0 here. So GCC 4.8 is likely pretty close already. IMHO we could give it a try and enable gnu11 for QEMU with GCC v4.8, too. If we later find problems, we could still switch back to gnu99 instead. Other opinions?
Switchinh back could be somewhat painful if we already started using C11 features. And if we don't plan to, then what exactly will -std=gnu11 buy us?
Quoted 58 lines · Markus Armbruster
Quoted 50 lines · Thomas Huth
Quoted 40 lines · Daniel P. Berrangé
Quoted 28 lines · Thomas Huth
Quoted 15 lines · Daniel P. Berrangé
Quoted 5 lines · Thomas Huth
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 8 lines
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
Quoted 5 lines
In 4.x gnu11 is marked as experimental. I'm not really comfortable
using experimental features - even if its warning free there's a risk it would silently mis-compile something.gnu99 is ok with 4.x - it is merely "incomplete".
gnu11 has the big advantage that it also fixes the problem with duplicated typedefs that are reported by older versions of Clang.
Are you sure about the experimental character in 4.x? I just looked at
https://gcc.gnu.org/onlinedocs/gcc-4.8.5/gcc/Standards.html and it says:Quoted 8 lines
"A fourth version of the C standard, known as C11, was published in 2011 as ISO/IEC 9899:2011. GCC has limited incomplete support for parts of this standard, enabled with -std=c11 or -std=iso9899:2011."
It does not say anything about "experimental" there. The word "experimental" is only used for the C++ support, but we hardly have C++ code in QEMU -- if you worry about that, I could simply drop the "-std=gnu++11" part from my patch?
I was looking at the "info gcc" docs on RHEL7, gcc-4.8.5-16.el7_4.1.x86_64:
Quoted 8 lines
"3.4 Options Controlling C Dialect
....snip... 'gnu11' 'gnu1x' GNU dialect of ISO C11. Support is incomplete and experimental. The name 'gnu1x' is deprecated."Quoted 5 lines
Ok. Looks like the "Support is incomplete and experimental" sentence has been removed with GCC 4.9.0 here. So GCC 4.8 is likely pretty close already. IMHO we could give it a try and enable gnu11 for QEMU with GCC v4.8, too. If we later find problems, we could still switch back to gnu99 instead. Other opinions?
Quoted 3 lines
Switchinh back could be somewhat painful if we already started using C11 features. And if we don't plan to, then what exactly will -std=gnu11 buy us?
With C11, we get safety for the "duplicated typedef" problem that we run into regularly again and again, see e.g.:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Thomas
Quoted 59 lines · Thomas Huth
Quoted 58 lines · Markus Armbruster
Quoted 55 lines · Thomas Huth
Quoted 40 lines · Daniel P. Berrangé
Quoted 28 lines · Thomas Huth
Quoted 15 lines · Daniel P. Berrangé
Quoted 5 lines · Thomas Huth
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 8 lines
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
Quoted 5 lines
In 4.x gnu11 is marked as experimental. I'm not really comfortable
using experimental features - even if its warning free there's a risk it would silently mis-compile something.gnu99 is ok with 4.x - it is merely "incomplete".
gnu11 has the big advantage that it also fixes the problem with duplicated typedefs that are reported by older versions of Clang.
Are you sure about the experimental character in 4.x? I just looked at
https://gcc.gnu.org/onlinedocs/gcc-4.8.5/gcc/Standards.html and it says:Quoted 8 lines
"A fourth version of the C standard, known as C11, was published in 2011 as ISO/IEC 9899:2011. GCC has limited incomplete support for parts of this standard, enabled with -std=c11 or -std=iso9899:2011."
It does not say anything about "experimental" there. The word "experimental" is only used for the C++ support, but we hardly have C++ code in QEMU -- if you worry about that, I could simply drop the "-std=gnu++11" part from my patch?
I was looking at the "info gcc" docs on RHEL7, gcc-4.8.5-16.el7_4.1.x86_64:
Quoted 8 lines
"3.4 Options Controlling C Dialect
....snip... 'gnu11' 'gnu1x' GNU dialect of ISO C11. Support is incomplete and experimental. The name 'gnu1x' is deprecated."Ok. Looks like the "Support is incomplete and experimental" sentence has been removed with GCC 4.9.0 here. So GCC 4.8 is likely pretty close already. IMHO we could give it a try and enable gnu11 for QEMU with GCC v4.8, too. If we later find problems, we could still switch back to gnu99 instead. Other opinions?
Quoted 8 lines
Quoted 3 lines
Switchinh back could be somewhat painful if we already started using C11 features. And if we don't plan to, then what exactly will -std=gnu11 buy us?
With C11, we get safety for the "duplicated typedef" problem that we run into regularly again and again, see e.g.:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
That's a compilation failure. "Support is experimental" makes me afraid of run time failures.
If we truly want C11, shouldn't we bump minimum required GCC to 4.9?
Quoted 68 lines · Markus Armbruster
Quoted 66 lines · Thomas Huth
Quoted 58 lines · Markus Armbruster
Quoted 50 lines · Thomas Huth
Quoted 40 lines · Daniel P. Berrangé
Quoted 28 lines · Thomas Huth
Quoted 15 lines · Daniel P. Berrangé
Quoted 5 lines · Thomas Huth
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 8 lines
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
Quoted 5 lines
In 4.x gnu11 is marked as experimental. I'm not really comfortable
using experimental features - even if its warning free there's a risk it would silently mis-compile something.gnu99 is ok with 4.x - it is merely "incomplete".
gnu11 has the big advantage that it also fixes the problem with duplicated typedefs that are reported by older versions of Clang.
Are you sure about the experimental character in 4.x? I just looked at
https://gcc.gnu.org/onlinedocs/gcc-4.8.5/gcc/Standards.html and it says:Quoted 8 lines
"A fourth version of the C standard, known as C11, was published in 2011 as ISO/IEC 9899:2011. GCC has limited incomplete support for parts of this standard, enabled with -std=c11 or -std=iso9899:2011."
It does not say anything about "experimental" there. The word "experimental" is only used for the C++ support, but we hardly have C++ code in QEMU -- if you worry about that, I could simply drop the "-std=gnu++11" part from my patch?
I was looking at the "info gcc" docs on RHEL7, gcc-4.8.5-16.el7_4.1.x86_64:
Quoted 8 lines
"3.4 Options Controlling C Dialect
....snip... 'gnu11' 'gnu1x' GNU dialect of ISO C11. Support is incomplete and experimental. The name 'gnu1x' is deprecated."Quoted 5 lines
Ok. Looks like the "Support is incomplete and experimental" sentence has been removed with GCC 4.9.0 here. So GCC 4.8 is likely pretty close already. IMHO we could give it a try and enable gnu11 for QEMU with GCC v4.8, too. If we later find problems, we could still switch back to gnu99 instead. Other opinions?
Quoted 3 lines
Switchinh back could be somewhat painful if we already started using C11 features. And if we don't plan to, then what exactly will -std=gnu11 buy us?
With C11, we get safety for the "duplicated typedef" problem that we run into regularly again and again, see e.g.:
Quoted 6 lines
That's a compilation failure. "Support is experimental" makes me afraid of run time failures.
If we truly want C11, shouldn't we bump minimum required GCC to 4.9?
That's not possible, since we claim to support RHEL7 / CentOS7 that is still using GCC v4.8.
Thomas
Quoted 50 lines · Thomas Huth
Quoted 40 lines · Daniel P. Berrangé
Quoted 28 lines · Thomas Huth
Quoted 15 lines · Daniel P. Berrangé
Quoted 5 lines · Thomas Huth
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 8 lines
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
Quoted 5 lines
In 4.x gnu11 is marked as experimental. I'm not really comfortable
using experimental features - even if its warning free there's a risk it would silently mis-compile something.gnu99 is ok with 4.x - it is merely "incomplete".
gnu11 has the big advantage that it also fixes the problem with duplicated typedefs that are reported by older versions of Clang.
Are you sure about the experimental character in 4.x? I just looked at
https://gcc.gnu.org/onlinedocs/gcc-4.8.5/gcc/Standards.html and it says:Quoted 8 lines
"A fourth version of the C standard, known as C11, was published in 2011 as ISO/IEC 9899:2011. GCC has limited incomplete support for parts of this standard, enabled with -std=c11 or -std=iso9899:2011."
It does not say anything about "experimental" there. The word "experimental" is only used for the C++ support, but we hardly have C++ code in QEMU -- if you worry about that, I could simply drop the "-std=gnu++11" part from my patch?
I was looking at the "info gcc" docs on RHEL7, gcc-4.8.5-16.el7_4.1.x86_64:
Quoted 8 lines
"3.4 Options Controlling C Dialect
....snip... 'gnu11' 'gnu1x' GNU dialect of ISO C11. Support is incomplete and experimental. The name 'gnu1x' is deprecated."
Quoted 5 lines
Ok. Looks like the "Support is incomplete and experimental" sentence has been removed with GCC 4.9.0 here. So GCC 4.8 is likely pretty close already. IMHO we could give it a try and enable gnu11 for QEMU with GCC v4.8, too. If we later find problems, we could still switch back to gnu99 instead. Other opinions?
Our code is already cleanly compiling with gnu99 standard - the problem is merely that we sometimes introduce regressions due to not enforcing that standard level. I don't think the features in gnu11 are compelling enough to justify using something that's declared experimental. As long as we always have a -std=gnu99 flag set, it will avoid the regressions we've seen.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 57 lines · Daniel P. Berrangé
Quoted 50 lines · Thomas Huth
Quoted 40 lines · Daniel P. Berrangé
Quoted 28 lines · Thomas Huth
Quoted 15 lines · Daniel P. Berrangé
Quoted 5 lines · Thomas Huth
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 8 lines
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
Quoted 5 lines
In 4.x gnu11 is marked as experimental. I'm not really comfortable
using experimental features - even if its warning free there's a risk it would silently mis-compile something.gnu99 is ok with 4.x - it is merely "incomplete".
gnu11 has the big advantage that it also fixes the problem with duplicated typedefs that are reported by older versions of Clang.
Are you sure about the experimental character in 4.x? I just looked at
https://gcc.gnu.org/onlinedocs/gcc-4.8.5/gcc/Standards.html and it says:Quoted 8 lines
"A fourth version of the C standard, known as C11, was published in 2011 as ISO/IEC 9899:2011. GCC has limited incomplete support for parts of this standard, enabled with -std=c11 or -std=iso9899:2011."
It does not say anything about "experimental" there. The word "experimental" is only used for the C++ support, but we hardly have C++ code in QEMU -- if you worry about that, I could simply drop the "-std=gnu++11" part from my patch?
I was looking at the "info gcc" docs on RHEL7, gcc-4.8.5-16.el7_4.1.x86_64:
Quoted 8 lines
"3.4 Options Controlling C Dialect
....snip... 'gnu11' 'gnu1x' GNU dialect of ISO C11. Support is incomplete and experimental. The name 'gnu1x' is deprecated."Quoted 5 lines
Ok. Looks like the "Support is incomplete and experimental" sentence has been removed with GCC 4.9.0 here. So GCC 4.8 is likely pretty close already. IMHO we could give it a try and enable gnu11 for QEMU with GCC v4.8, too. If we later find problems, we could still switch back to gnu99 instead. Other opinions?
Quoted 4 lines
Our code is already cleanly compiling with gnu99 standard - the problem is merely that we sometimes introduce regressions due to not enforcing that standard level. I don't think the features in gnu11 are compelling enough to justify using something that's declared experimental.
What about the duplicated typedef problem? See:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
That one occured with Clang, but I think we've had plenty of these in the past with GCC, too...
Thomas
Quoted 62 lines · Thomas Huth
Quoted 57 lines · Daniel P. Berrangé
Quoted 50 lines · Thomas Huth
Quoted 40 lines · Daniel P. Berrangé
Quoted 28 lines · Thomas Huth
Quoted 15 lines · Daniel P. Berrangé
Quoted 5 lines · Thomas Huth
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 8 lines
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
Quoted 5 lines
In 4.x gnu11 is marked as experimental. I'm not really comfortable
using experimental features - even if its warning free there's a risk it would silently mis-compile something.gnu99 is ok with 4.x - it is merely "incomplete".
gnu11 has the big advantage that it also fixes the problem with duplicated typedefs that are reported by older versions of Clang.
Are you sure about the experimental character in 4.x? I just looked at
https://gcc.gnu.org/onlinedocs/gcc-4.8.5/gcc/Standards.html and it says:Quoted 8 lines
"A fourth version of the C standard, known as C11, was published in 2011 as ISO/IEC 9899:2011. GCC has limited incomplete support for parts of this standard, enabled with -std=c11 or -std=iso9899:2011."
It does not say anything about "experimental" there. The word "experimental" is only used for the C++ support, but we hardly have C++ code in QEMU -- if you worry about that, I could simply drop the "-std=gnu++11" part from my patch?
I was looking at the "info gcc" docs on RHEL7, gcc-4.8.5-16.el7_4.1.x86_64:
Quoted 8 lines
"3.4 Options Controlling C Dialect
....snip... 'gnu11' 'gnu1x' GNU dialect of ISO C11. Support is incomplete and experimental. The name 'gnu1x' is deprecated."Quoted 5 lines
Ok. Looks like the "Support is incomplete and experimental" sentence has been removed with GCC 4.9.0 here. So GCC 4.8 is likely pretty close already. IMHO we could give it a try and enable gnu11 for QEMU with GCC v4.8, too. If we later find problems, we could still switch back to gnu99 instead. Other opinions?
Quoted 4 lines
Our code is already cleanly compiling with gnu99 standard - the problem is merely that we sometimes introduce regressions due to not enforcing that standard level. I don't think the features in gnu11 are compelling enough to justify using something that's declared experimental.
Quoted 6 lines
What about the duplicated typedef problem? See:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
That one occured with Clang, but I think we've had plenty of these in the past with GCC, too...
IIUC, That's only a problem because we don't pass any -std flag, and so get the compilers default, which may be gnu11. If we explicitly set -std=gnu99, that problem will be reported by patchew, travis and maintainers own build tests, and thus won't get anywhere near git master.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 67 lines · Daniel P. Berrangé
Quoted 66 lines · Thomas Huth
Quoted 57 lines · Daniel P. Berrangé
Quoted 50 lines · Thomas Huth
Quoted 40 lines · Daniel P. Berrangé
Quoted 28 lines · Thomas Huth
Quoted 15 lines · Daniel P. Berrangé
Quoted 5 lines · Thomas Huth
Different versions of GCC and Clang use different versions of the C standard. This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 8 lines
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the same level for all compilers. Since our minimum compiler versions are GCC v4.8 and Clang v3.4 now, and both basically support "gnu11" already, this seems to be a good choice.
Quoted 5 lines
In 4.x gnu11 is marked as experimental. I'm not really comfortable
using experimental features - even if its warning free there's a risk it would silently mis-compile something.gnu99 is ok with 4.x - it is merely "incomplete".
gnu11 has the big advantage that it also fixes the problem with duplicated typedefs that are reported by older versions of Clang.
Are you sure about the experimental character in 4.x? I just looked at
https://gcc.gnu.org/onlinedocs/gcc-4.8.5/gcc/Standards.html and it says:Quoted 8 lines
"A fourth version of the C standard, known as C11, was published in 2011 as ISO/IEC 9899:2011. GCC has limited incomplete support for parts of this standard, enabled with -std=c11 or -std=iso9899:2011."
It does not say anything about "experimental" there. The word "experimental" is only used for the C++ support, but we hardly have C++ code in QEMU -- if you worry about that, I could simply drop the "-std=gnu++11" part from my patch?
I was looking at the "info gcc" docs on RHEL7, gcc-4.8.5-16.el7_4.1.x86_64:
Quoted 8 lines
"3.4 Options Controlling C Dialect
....snip... 'gnu11' 'gnu1x' GNU dialect of ISO C11. Support is incomplete and experimental. The name 'gnu1x' is deprecated."Quoted 5 lines
Ok. Looks like the "Support is incomplete and experimental" sentence has been removed with GCC 4.9.0 here. So GCC 4.8 is likely pretty close already. IMHO we could give it a try and enable gnu11 for QEMU with GCC v4.8, too. If we later find problems, we could still switch back to gnu99 instead. Other opinions?
Quoted 4 lines
Our code is already cleanly compiling with gnu99 standard - the problem is merely that we sometimes introduce regressions due to not enforcing that standard level. I don't think the features in gnu11 are compelling enough to justify using something that's declared experimental.
What about the duplicated typedef problem? See:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
Quoted 7 lines
Quoted 2 lines
That one occured with Clang, but I think we've had plenty of these in the past with GCC, too...
IIUC, That's only a problem because we don't pass any -std flag, and so get the compilers default, which may be gnu11. If we explicitly set -std=gnu99, that problem will be reported by patchew, travis and maintainers own build tests, and thus won't get anywhere near git master.
Ah, right, I just tried it with a newer version of Clang, and indeed it then prints out a warning if some code with a duplicated typedef is compiled with "-std=gnu99" (while it remains silent without that option). So in that case I'm fine with gnu99, too. I'll send a v2 of the patch...
Thomas