drm/i915: Implement HDCP2.2
Subsystems (2)
v15 cover drm/i915: Implement HDCP2.2
This series enables the HDCP2.2 Type 0 for I915. The sequence for HDCP2.2 authentication and encryption is implemented as a generic flow between HDMI and DP. Encoder specific implementations are moved into hdcp_shim.
Intel HWs supports HDCP2.2 through ME FW. Hence this series introduces a client driver for mei bus, so that for HDCP2.2 authentication, HDCP2.2 stack in I915 can avail the services from ME FW. To enable this client driver set the config variable CONFIG_INTEL_MEI_HDCP.
Userspace interface remains unchanged as version agnostic. When userspace request for HDCP enable, Kernel will detect the HDCP source and sink's HDCP version(1.4/2.2)capability and enable the best capable version for that combination.
This series enables the HDCP2.2 for Type0 content streams.
Test-with: <[email protected]> So that CP will be tested on BAT machine too.
Major changes in v15
- All I915 patches are merged. So dropping them.
- Few minor suggestions are incorporated at mei changes.
To ease the review process, series is hosted at
https://github.com/ramalingampc2008/drm-tip.git hdcp2_2_v15
Ramalingam C (15):
misc/mei/hdcp: Client driver for HDCP application misc/mei/hdcp: Define ME FW interface for HDCP2.2 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session misc/mei/hdcp: Verify Receiver Cert and prepare km misc/mei/hdcp: Verify H_prime
misc/mei/hdcp: Store the HDCP Pairing info misc/mei/hdcp: Initiate Locality check misc/mei/hdcp: Verify L_prime
misc/mei/hdcp: Prepare Session Key misc/mei/hdcp: Repeater topology verification and ack misc/mei/hdcp: Verify M_prime
misc/mei/hdcp: Enabling the HDCP authentication misc/mei/hdcp: Closing wired HDCP2.2 Tx Session misc/mei/hdcp: Component framework for I915 Interface
FOR_TEST_ONLY: i915/Kconfig: Select mei_hdcp by I915
Tomas Winkler (1):
mei: bus: whitelist hdcp client
drivers/misc/mei/Kconfig | 11 + drivers/misc/mei/Makefile | 2 + drivers/misc/mei/bus-fixup.c | 16 + drivers/misc/mei/hdcp/Makefile | 7 + drivers/misc/mei/hdcp/mei_hdcp.c | 849 +++++++++++++++++++++++++++++++++++++++ drivers/misc/mei/hdcp/mei_hdcp.h | 377 +++++++++++++++++ 6 files changed, 1262 insertions(+) create mode 100644 drivers/misc/mei/hdcp/Makefile create mode 100644 drivers/misc/mei/hdcp/mei_hdcp.c create mode 100644 drivers/misc/mei/hdcp/mei_hdcp.h
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v15 1/16 mei: bus: whitelist hdcp client
From: Tomas Winkler <[email protected]>
Whitelist HDCP client for in kernel drm use
v2:
Rebased.
--- drivers/misc/mei/bus-fixup.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
drivers/misc/mei/bus-fixup.c +16 -0
@@ -40,6 +40,9 @@ static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO;#define MEI_UUID_MKHIF_FIX UUID_LE(0x55213584, 0x9a29, 0x4916, \ 0xba, 0xdf, 0xf, 0xb7, 0xed, 0x68, 0x2a, 0xeb) +#define MEI_UUID_HDCP UUID_LE(0xB638AB7E, 0x94E2, 0x4EA2, \ + 0xA5, 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04) +#define MEI_UUID_ANY NULL_UUID_LE/**
@@ -71,6 +74,18 @@ static void blacklist(struct mei_cl_device *cldev) cldev->do_match =0 ; } +/** +* whitelist - forcefully whitelist client +* +* @cldev: me clients device +*/ +static void whitelist (struct mei_cl_device *cldev) +{ +dev_dbg (&cldev->dev,"running hook %s\n" , __func__); + + cldev->do_match =1 ; +} +#define OSTYPE_LINUX 2struct mei_os_ver {__le16 build;
@@ -472,6 +487,7 @@ static struct mei_fixup {MEI_FIXUP (MEI_UUID_NFC_HCI , mei_nfc),MEI_FIXUP (MEI_UUID_WD , mei_wd),MEI_FIXUP (MEI_UUID_MKHIF_FIX , mei_mkhi_fix), + MEI_FIXUP(MEI_UUID_HDCP, whitelist), };/**
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v15 2/16 misc/mei/hdcp: Client driver for HDCP application
In reply to Ramalingam CME FW contributes a vital role in HDCP2.2 authentication. HDCP2.2 driver needs to communicate to ME FW for each step of the HDCP2.2 authentication.
ME FW prepare and HDCP2.2 authentication parameters and encrypt them as per spec. With such parameter Driver prepares HDCP2.2 auth messages and communicate with HDCP2.2 sink.
Similarly HDCP2.2 sink's response is shared with ME FW for decrypt and verification.
Once All the steps of HDCP2.2 authentications are complete on driver's request ME FW will configure the port as authenticated and supply the HDCP keys to the Gen HW for encryption.
Only after this stage HDCP2.2 driver can start the HDCP2.2 encryption for a port.
ME FW is interfaced to kernel through MEI Bus Driver. To obtain the HDCP2.2 services from the ME FW through MEI Bus driver MEI Client Driver is developed.
v2:
hdcp files are moved to drivers/misc/mei/hdcp/ [Tomas]
v3:
Squashed the Kbuild support [Tomas]
UUID renamed and Module License is modified [Tomas] drv_data is set to null at remove [Tomas]
v4:
Module name is changed to "MEI HDCP"
I915 Selects the MEI_HDCP
v5:
Remove redundant text from the License header Fix malformed licence
Removed the drv_data resetting.
v6:
K-Doc addition. [Tomas]
v7:
%s/UUID_LE/GUID_INIT [Tomas]
GPL Ver is 2.0 than 2.0+ [Tomas]
v8:
Added more info into Kconfig addition [Tomas]
--- drivers/misc/mei/Kconfig | 10 +++++++ drivers/misc/mei/Makefile | 2 ++ drivers/misc/mei/hdcp/Makefile | 7 +++++ drivers/misc/mei/hdcp/mei_hdcp.c | 64 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 83 insertions(+) create mode 100644 drivers/misc/mei/hdcp/Makefile create mode 100644 drivers/misc/mei/hdcp/mei_hdcp.c
drivers/misc/mei/Kconfig +10 -0
@@ -43,3 +43,13 @@ config INTEL_MEI_TXE Supported SoCs: Intel Bay Trail + +config INTEL_MEI_HDCP + tristate "Intel HDCP2.2 services of ME Interface" + select INTEL_MEI_ME + depends on DRM_I915 + help + MEI Support for HDCP2.2 Services on Intel platforms. + + Enables the ME FW services required for HDCP2.2 support through + I915 display driver of Intel.
drivers/misc/mei/Makefile +2 -0
@@ -24,3 +24,5 @@ mei-txe-objs += hw-txe.o mei-$(CONFIG_EVENT_TRACING) += mei-trace.o CFLAGS_mei-trace.o = -I$(src) + +obj-$(CONFIG_INTEL_MEI_HDCP) += hdcp/
drivers/misc/mei/hdcp/Makefile new file +7 -0
@@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2019, Intel Corporation. +# +# Makefile - HDCP client driver for Intel MEI Bus Driver. + +obj-$(CONFIG_INTEL_MEI_HDCP) += mei_hdcp.o
drivers/misc/mei/hdcp/mei_hdcp.c new file +64 -0
64 lines not on this page · raw message
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 3/16 misc/mei/hdcp: Define ME FW interface for HDCP2.2
In reply to Ramalingam CDefines the HDCP specific ME FW interfaces such as Request CMDs, payload structure for CMDs and their response status codes.
This patch defines payload size(Excluding the Header)for each WIRED HDCP2.2 CMDs.
v2: Rebased.
v3:
Extra comments are removed.
v4:
%s/\/\*\*/\/\*
v5:
Extra lines are removed.
v6:
Remove redundant text from the License header
%s/LPRIME_HALF/V_PRIME_HALF
%s/uintxx_t/uxx
v7:
Extra taps removed.
v8:
k is defined as __be16 [Tomas]
Acked-by Tomas Winkler <[email protected]>
--- drivers/misc/mei/hdcp/mei_hdcp.h | 366 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 366 insertions(+) create mode 100644 drivers/misc/mei/hdcp/mei_hdcp.h
drivers/misc/mei/hdcp/mei_hdcp.h new file +366 -0
@@ -0,0 +1,366 @@ +/* SPDX-License-Identifier: (GPL-2.0+) */ +/* +* Copyright © 2019 Intel Corporation +* +* Authors: +* Ramalingam C <[email protected]> +*/ + +#ifndef __MEI_HDCP_H__ +#define __MEI_HDCP_H__ + +#include <drm/drm_hdcp.h> + +/* me_hdcp_status: Enumeration of all HDCP Status Codes */ +enum me_hdcp_status { +ME_HDCP_STATUS_SUCCESS =0x0000 , + +/* WiDi Generic Status Codes */ +ME_HDCP_STATUS_INTERNAL_ERROR =0x1000 , +ME_HDCP_STATUS_UNKNOWN_ERROR =0x1001 , +ME_HDCP_STATUS_INCORRECT_API_VERSION =0x1002 , +ME_HDCP_STATUS_INVALID_FUNCTION =0x1003 , +ME_HDCP_STATUS_INVALID_BUFFER_LENGTH =0x1004 , +ME_HDCP_STATUS_INVALID_PARAMS =0x1005 , +ME_HDCP_STATUS_AUTHENTICATION_FAILED =0x1006 , + +/* WiDi Status Codes */ +ME_HDCP_INVALID_SESSION_STATE =0x6000 , +ME_HDCP_SRM_FRAGMENT_UNEXPECTED =0x6001 , +ME_HDCP_SRM_INVALID_LENGTH =0x6002 , +ME_HDCP_SRM_FRAGMENT_OFFSET_INVALID =0x6003 , +ME_HDCP_SRM_VERIFICATION_FAILED =0x6004 , +ME_HDCP_SRM_VERSION_TOO_OLD =0x6005 , +ME_HDCP_RX_CERT_VERIFICATION_FAILED =0x6006 , +ME_HDCP_RX_REVOKED =0x6007 , +ME_HDCP_H_VERIFICATION_FAILED =0x6008 , +ME_HDCP_REPEATER_CHECK_UNEXPECTED =0x6009 , +ME_HDCP_TOPOLOGY_MAX_EXCEEDED =0x600A , +ME_HDCP_V_VERIFICATION_FAILED =0x600B , +ME_HDCP_L_VERIFICATION_FAILED =0x600C , +ME_HDCP_STREAM_KEY_ALLOC_FAILED =0x600D , +ME_HDCP_BASE_KEY_RESET_FAILED =0x600E , +ME_HDCP_NONCE_GENERATION_FAILED =0x600F , +ME_HDCP_STATUS_INVALID_E_KEY_STATE =0x6010 , +ME_HDCP_STATUS_INVALID_CS_ICV =0x6011 , +ME_HDCP_STATUS_INVALID_KB_KEY_STATE =0x6012 , +ME_HDCP_STATUS_INVALID_PAVP_MODE_ICV =0x6013 , +ME_HDCP_STATUS_INVALID_PAVP_MODE =0x6014 , +ME_HDCP_STATUS_LC_MAX_ATTEMPTS =0x6015 , + +/* New status for HDCP 2.1 */ +ME_HDCP_STATUS_MISMATCH_IN_M =0x6016 , + +/* New status code for HDCP 2.2 Rx */ +ME_HDCP_STATUS_RX_PROV_NOT_ALLOWED =0x6017 , +ME_HDCP_STATUS_RX_PROV_WRONG_SUBJECT =0x6018 , +ME_HDCP_RX_NEEDS_PROVISIONING =0x6019 , +ME_HDCP_BKSV_ICV_AUTH_FAILED =0x6020 , +ME_HDCP_STATUS_INVALID_STREAM_ID =0x6021 , +ME_HDCP_STATUS_CHAIN_NOT_INITIALIZED =0x6022 , +ME_HDCP_FAIL_NOT_EXPECTED =0x6023 , +ME_HDCP_FAIL_HDCP_OFF =0x6024 , +ME_HDCP_FAIL_INVALID_PAVP_MEMORY_MODE =0x6025 , +ME_HDCP_FAIL_AES_ECB_FAILURE =0x6026 , +ME_HDCP_FEATURE_NOT_SUPPORTED =0x6027 , +ME_HDCP_DMA_READ_ERROR =0x6028 , +ME_HDCP_DMA_WRITE_ERROR =0x6029 , +ME_HDCP_FAIL_INVALID_PACKET_SIZE =0x6030 , +ME_HDCP_H264_PARSING_ERROR =0x6031 , +ME_HDCP_HDCP2_ERRATA_VIDEO_VIOLATION =0x6032 , +ME_HDCP_HDCP2_ERRATA_AUDIO_VIOLATION =0x6033 , +ME_HDCP_TX_ACTIVE_ERROR =0x6034 , +ME_HDCP_MODE_CHANGE_ERROR =0x6035 , +ME_HDCP_STREAM_TYPE_ERROR =0x6036 , +ME_HDCP_STREAM_MANAGE_NOT_POSSIBLE =0x6037 , + +ME_HDCP_STATUS_PORT_INVALID_COMMAND =0x6038 , +ME_HDCP_STATUS_UNSUPPORTED_PROTOCOL =0x6039 , +ME_HDCP_STATUS_INVALID_PORT_INDEX =0x603a , +ME_HDCP_STATUS_TX_AUTH_NEEDED =0x603b , +ME_HDCP_STATUS_NOT_INTEGRATED_PORT =0x603c , +ME_HDCP_STATUS_SESSION_MAX_REACHED =0x603d , + +/* hdcp capable bit is not set in rx_caps(error is unique to DP) */ +ME_HDCP_STATUS_NOT_HDCP_CAPABLE =0x6041 , + +ME_HDCP_STATUS_INVALID_STREAM_COUNT =0x6042 , +}; + +#define HDCP_API_VERSION 0x00010000 + +#define HDCP_M_LEN 16 +#define HDCP_KH_LEN 16 + +/* Payload Buffer size(Excluding Header) for CMDs and corresponding response */ +/* Wired_Tx_AKE */ +#define WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN (4 + 1) +#define WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_OUT (4 + 8 + 3) + +#define WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN (4 + 522 + 8 + 3) +#define WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_MIN_OUT (4 + 1 + 3 + 16 + 16) +#define WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_MAX_OUT (4 + 1 + 3 + 128) + +#define WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN (4 + 32) +#define WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_OUT (4) + +#define WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN (4 + 16) +#define WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_OUT (4) + +#define WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN (4) +#define WIRED_CMD_BUF_LEN_CLOSE_SESSION_OUT (4) + +/* Wired_Tx_LC */ +#define WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN (4) +#define WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_OUT (4 + 8) + +#define WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN (4 + 32) +#define WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_OUT (4) + +/* Wired_Tx_SKE */ +#define WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN (4) +#define WIRED_CMD_BUF_LEN_GET_SESSION_KEY_OUT (4 + 16 + 8) + +/* Wired_Tx_SKE */ +#define WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN (4 + 1) +#define WIRED_CMD_BUF_LEN_ENABLE_AUTH_OUT (4) + +/* Wired_Tx_Repeater */ +#define WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN (4 + 2 + 3 + 16 + 155) +#define WIRED_CMD_BUF_LEN_VERIFY_REPEATER_OUT (4 + 1 + 16) + +#define WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_MIN_IN (4 + 3 + \ + 32 + 2 + 2) + +#define WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_OUT (4) + +/* hdcp_command_id: Enumeration of all WIRED HDCP Command IDs */ +enum hdcp_command_id { + _WIDI_COMMAND_BASE =0x00030000 , +WIDI_INITIATE_HDCP2_SESSION = _WIDI_COMMAND_BASE, +HDCP_GET_SRM_STATUS , +HDCP_SEND_SRM_FRAGMENT , + +/* The wired HDCP Tx commands */ + _WIRED_COMMAND_BASE =0x00031000 , +WIRED_INITIATE_HDCP2_SESSION = _WIRED_COMMAND_BASE, +WIRED_VERIFY_RECEIVER_CERT , +WIRED_AKE_SEND_HPRIME , +WIRED_AKE_SEND_PAIRING_INFO , +WIRED_INIT_LOCALITY_CHECK , +WIRED_VALIDATE_LOCALITY , +WIRED_GET_SESSION_KEY , +WIRED_ENABLE_AUTH , +WIRED_VERIFY_REPEATER , +WIRED_REPEATER_AUTH_STREAM_REQ , +WIRED_CLOSE_SESSION , + + _WIRED_COMMANDS_COUNT, +}; + +union encrypted_buff { +u8 e_kpub_km[HDCP_2_2_E_KPUB_KM_LEN ]; +u8 e_kh_km_m[HDCP_2_2_E_KH_KM_M_LEN ]; +struct { +u8 e_kh_km[HDCP_KH_LEN ]; +u8 m[HDCP_M_LEN ]; + } __packed; +}; + +/* HDCP HECI message header. All header values are little endian. */ +struct hdcp_cmd_header { +u32 api_version; +u32 command_id; +enum me_hdcp_status status; +/* Length of the HECI message (excluding the header) */ +u32 buffer_len; +} __packed; + +/* Empty command request or response. No data follows the header. */ +struct hdcp_cmd_no_data { +struct hdcp_cmd_header header; +} __packed; + +/* Uniquely identifies the hdcp port being addressed for a given command. */ +struct hdcp_port_id { +u8 integrated_port_type; +u8 physical_port; +u16 reserved; +} __packed; + +/* +* Data structures for integrated wired HDCP2 Tx in +* support of the AKE protocol +*/ +/* HECI struct for integrated wired HDCP Tx session initiation. */ +struct wired_cmd_initiate_hdcp2_session_in { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +u8 protocol;/* for HDMI vs DP */ +} __packed; + +struct wired_cmd_initiate_hdcp2_session_out { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +u8 r_tx[HDCP_2_2_RTX_LEN ]; +struct hdcp2_tx_caps tx_caps; +} __packed; + +/* HECI struct for ending an integrated wired HDCP Tx session. */ +struct wired_cmd_close_session_in { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +} __packed; + +struct wired_cmd_close_session_out { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +} __packed; + +/* HECI struct for integrated wired HDCP Tx Rx Cert verification. */ +struct wired_cmd_verify_receiver_cert_in { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +struct hdcp2_cert_rx cert_rx; +u8 r_rx[HDCP_2_2_RRX_LEN ]; +u8 rx_caps[HDCP_2_2_RXCAPS_LEN ]; +} __packed; + +struct wired_cmd_verify_receiver_cert_out { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +u8 km_stored; +u8 reserved[3 ]; +union encrypted_buff ekm_buff; +} __packed; + +/* HECI struct for verification of Rx's Hprime in a HDCP Tx session */ +struct wired_cmd_ake_send_hprime_in { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +u8 h_prime[HDCP_2_2_H_PRIME_LEN ]; +} __packed; + +struct wired_cmd_ake_send_hprime_out { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +} __packed; + +/* +* HECI struct for sending in AKE pairing data generated by the Rx in an +* integrated wired HDCP Tx session. +*/ +struct wired_cmd_ake_send_pairing_info_in { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +u8 e_kh_km[HDCP_2_2_E_KH_KM_LEN ]; +} __packed; + +struct wired_cmd_ake_send_pairing_info_out { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +} __packed; + +/* Data structures for integrated wired HDCP2 Tx in support of the LC protocol*/ +/* +* HECI struct for initiating locality check with an +* integrated wired HDCP Tx session. +*/ +struct wired_cmd_init_locality_check_in { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +} __packed; + +struct wired_cmd_init_locality_check_out { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +u8 r_n[HDCP_2_2_RN_LEN ]; +} __packed; + +/* +* HECI struct for validating an Rx's LPrime value in an +* integrated wired HDCP Tx session. +*/ +struct wired_cmd_validate_locality_in { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +u8 l_prime[HDCP_2_2_L_PRIME_LEN ]; +} __packed; + +struct wired_cmd_validate_locality_out { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +} __packed; + +/* +* Data structures for integrated wired HDCP2 Tx in support of the +* SKE protocol +*/ +/* HECI struct for creating session key */ +struct wired_cmd_get_session_key_in { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +} __packed; + +struct wired_cmd_get_session_key_out { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +u8 e_dkey_ks[HDCP_2_2_E_DKEY_KS_LEN ]; +u8 r_iv[HDCP_2_2_RIV_LEN ]; +} __packed; + +/* HECI struct for the Tx enable authentication command */ +struct wired_cmd_enable_auth_in { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +u8 stream_type; +} __packed; + +struct wired_cmd_enable_auth_out { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +} __packed; + +/* +* Data structures for integrated wired HDCP2 Tx in support of +* the repeater protocols +*/ +/* +* HECI struct for verifying the downstream repeater's HDCP topology in an +* integrated wired HDCP Tx session. +*/ +struct wired_cmd_verify_repeater_in { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +u8 rx_info[HDCP_2_2_RXINFO_LEN ]; +u8 seq_num_v[HDCP_2_2_SEQ_NUM_LEN ]; +u8 v_prime[HDCP_2_2_V_PRIME_HALF_LEN ]; +u8 receiver_ids[HDCP_2_2_RECEIVER_IDS_MAX_LEN ]; +} __packed; + +struct wired_cmd_verify_repeater_out { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +u8 content_type_supported; +u8 v[HDCP_2_2_V_PRIME_HALF_LEN ]; +} __packed; + +/* +* HECI struct in support of stream management in an +* integrated wired HDCP Tx session. +*/ +struct wired_cmd_repeater_auth_stream_req_in { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +u8 seq_num_m[HDCP_2_2_SEQ_NUM_LEN ]; +u8 m_prime[HDCP_2_2_MPRIME_LEN ]; +__be16 k; +struct hdcp2_streamid_type streams[1 ]; +} __packed; + +struct wired_cmd_repeater_auth_stream_req_out { +struct hdcp_cmd_header header; +struct hdcp_port_id port; +} __packed; + +#endif /* __MEI_HDCP_H__ */
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 4/16 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session
In reply to Ramalingam CRequest ME FW to start the HDCP2.2 session for an intel port. Prepares payloads for command WIRED_INITIATE_HDCP2_SESSION and sends to ME FW.
On Success, ME FW will start a HDCP2.2 session for the port and provides the content for HDCP2.2 AKE_Init message.
v2: Rebased.
v3:
cldev is add as a separate parameter [Tomas]
Redundant comment and typecast are removed [Tomas]
v4:
%zd is used for size [Alexander]
%s/return -1/return -EIO [Alexander]
Spellings in commit msg is fixed [Uma]
v5: Rebased.
v6:
Collected the rb-ed by.
Realigning the patches in the series.
v7:
Adjust to the new mei interface.
Fix for kdoc.
v8:
K-Doc Addition.
memcpy for const length.
v9:
s/mei_hdcp_ddi/mei_fw_ddi
s/i915_port/mei_i915_port [Tomas]
renamed func as mei_hdcp_* [Tomas]
Instead of macro, inline func for ddi index is used. [Tomas]
v10:
Switch case for the coversion between i915_port to mei_ddi [Tomas] Kernel doc fix.
v11:
mei_hdcp_ops is defined as const. [Tomas]
--- drivers/misc/mei/hdcp/mei_hdcp.c | 94 ++++++++++++++++++++++++++++++++++++++++ drivers/misc/mei/hdcp/mei_hdcp.h | 11 +++++ 2 files changed, 105 insertions(+)
drivers/misc/mei/hdcp/mei_hdcp.c +94 -0
@@ -23,6 +23,100 @@#include <linux/slab.h> #include <linux/uuid.h> #include <linux/mei_cl_bus.h> +#include <drm/drm_connector.h> +#include <drm/i915_component.h> +#include <drm/i915_mei_hdcp_interface.h> + +#include "mei_hdcp.h" + +static inline u8 mei_get_ddi_index (enum port port) +{ +switch (port) { +case PORT_A : +return MEI_DDI_A ; + case PORT_B ... PORT_F: +return (u8 )port; +default : +return MEI_DDI_INVALID_PORT ; + } +} + +/** +* mei_hdcp_initiate_session() - Initiate a Wired HDCP2.2 Tx Session in ME FW +* @dev: device corresponding to the mei_cl_device +* @data: Intel HW specific hdcp data +* @ake_data: AKE_Init msg output. +* +* Return: 0 on Success, <0 on Failure. +*/ +static int +mei_hdcp_initiate_session (struct device *dev,struct hdcp_port_data *data, +struct hdcp2_ake_init *ake_data) +{ +struct wired_cmd_initiate_hdcp2_session_in session_init_in = { {0 } }; +struct wired_cmd_initiate_hdcp2_session_out + session_init_out = { {0 } }; +struct mei_cl_device *cldev; +ssize_t byte; + +if (!dev || !data || !ake_data) +return -EINVAL ; + + cldev =to_mei_cl_device (dev); + + session_init_in.header.api_version =HDCP_API_VERSION ; + session_init_in.header.command_id =WIRED_INITIATE_HDCP2_SESSION ; + session_init_in.header.status =ME_HDCP_STATUS_SUCCESS ; + session_init_in.header.buffer_len = +WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN ; + + session_init_in.port.integrated_port_type = data->port_type; + session_init_in.port.physical_port =mei_get_ddi_index (data->port); + session_init_in.protocol = data->protocol; + + byte =mei_cldev_send (cldev, (u8 *)&session_init_in, +sizeof (session_init_in)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_send failed. %zd\n" , byte); +return byte; + } + + byte =mei_cldev_recv (cldev, (u8 *)&session_init_out, +sizeof (session_init_out)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_recv failed. %zd\n" , byte); +return byte; + } + +if (session_init_out.header.status !=ME_HDCP_STATUS_SUCCESS ) { +dev_dbg (dev,"ME cmd 0x%08X Failed. Status: 0x%X\n" , +WIRED_INITIATE_HDCP2_SESSION , + session_init_out.header.status); +return -EIO ; + } + + ake_data->msg_id =HDCP_2_2_AKE_INIT ; + ake_data->tx_caps = session_init_out.tx_caps; +memcpy (ake_data->r_tx, session_init_out.r_tx,HDCP_2_2_RTX_LEN ); + +return 0 ; +} + +static const __attribute__((unused)) +struct i915_hdcp_component_ops mei_hdcp_ops = { + .owner =THIS_MODULE , + .initiate_hdcp2_session = mei_hdcp_initiate_session, + .verify_receiver_cert_prepare_km =NULL , + .verify_hprime =NULL , + .store_pairing_info =NULL , + .initiate_locality_check =NULL , + .verify_lprime =NULL , + .get_session_key =NULL , + .repeater_check_flow_prepare_ack =NULL , + .verify_mprime =NULL , + .enable_hdcp_authentication =NULL , + .close_hdcp_session =NULL , +};static int mei_hdcp_probe (struct mei_cl_device *cldev,const struct mei_cl_device_id *id)
drivers/misc/mei/hdcp/mei_hdcp.h +11 -0
@@ -363,4 +363,15 @@ struct wired_cmd_repeater_auth_stream_req_out { struct hdcp_port_id port; } __packed; +enum mei_fw_ddi { +MEI_DDI_INVALID_PORT =0x0 , + +MEI_DDI_B =1 , +MEI_DDI_C , +MEI_DDI_D , +MEI_DDI_E , +MEI_DDI_F , +MEI_DDI_A =7 , +MEI_DDI_RANGE_END =MEI_DDI_A , +};#endif /* __MEI_HDCP_H__ */
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
kbuild test robot
build botRe: [PATCH v15 04/16] misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session
Thank you for the patch! Yet something to improve:
Hi Ramalingam,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on char-misc/char-misc-testing]
[also build test ERROR on v5.0-rc4 next-20190222]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Ramalingam-C/drm-i915-Implement-HDCP2-2/20190222-182139
config: x86_64-rhel-7.2 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0 reproduce:
# save the attached .config to linux build tree
make ARCH=x86_64 All errors (new ones prefixed by >>):
>> drivers/misc/mei/hdcp/mei_hdcp.c:28:10: fatal error: drm/i915_mei_hdcp_interface.h: No such file or directory
#include <drm/i915_mei_hdcp_interface.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~compilation terminated.
vim +28 drivers/misc/mei/hdcp/mei_hdcp.c
> 28 #include <drm/i915_mei_hdcp_interface.h>
29 ---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 5/16 misc/mei/hdcp: Verify Receiver Cert and prepare km
In reply to Ramalingam CRequests for verification for receiver certification and also the preparation for next AKE auth message with km.
On Success ME FW validate the HDCP2.2 receivers certificate and do the revocation check on the receiver ID. AKE_Stored_Km will be prepared if the receiver is already paired, else AKE_No_Stored_Km will be prepared.
Here AKE_Stored_Km and AKE_No_Stored_Km are HDCP2.2 protocol msgs.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas] Redundant comments and cast are removed [Tomas]
v4:
%zd is used for ssize_t [Alexander] %s/return -1/return -EIO [Alexander]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc Addition. [Tomas]
memcpy for const length.
v9:
renamed func as mei_hdcp_* [Tomas] Inline function is defined for DDI index [Tomas]
v10:
Fixed the conversion of u8 to bool [Tomas] K-Doc fix [Tomas]
v11:
Rebased.
--- drivers/misc/mei/hdcp/mei_hdcp.c | 83 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 82 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +82 -1
@@ -102,11 +102,92 @@ mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data,return 0 ; } +/** +* mei_hdcp_verify_receiver_cert_prepare_km() - Verify the Receiver Certificate +* AKE_Send_Cert and prepare AKE_Stored_Km/AKE_No_Stored_Km +* @dev: device corresponding to the mei_cl_device +* @data: Intel HW specific hdcp data +* @rx_cert: AKE_Send_Cert for verification +* @km_stored: Pairing status flag output +* @ek_pub_km: AKE_Stored_Km/AKE_No_Stored_Km output msg +* @msg_sz : size of AKE_XXXXX_Km output msg +* +* Return: 0 on Success, <0 on Failure +*/ +static int +mei_hdcp_verify_receiver_cert_prepare_km (struct device *dev, +struct hdcp_port_data *data, +struct hdcp2_ake_send_cert *rx_cert, +bool *km_stored, +struct hdcp2_ake_no_stored_km + *ek_pub_km, +size_t *msg_sz) +{ +struct wired_cmd_verify_receiver_cert_in verify_rxcert_in = { {0 } }; +struct wired_cmd_verify_receiver_cert_out verify_rxcert_out = { {0 } }; +struct mei_cl_device *cldev; +ssize_t byte; + +if (!dev || !data || !rx_cert || !km_stored || !ek_pub_km || !msg_sz) +return -EINVAL ; + + cldev =to_mei_cl_device (dev); + + verify_rxcert_in.header.api_version =HDCP_API_VERSION ; + verify_rxcert_in.header.command_id =WIRED_VERIFY_RECEIVER_CERT ; + verify_rxcert_in.header.status =ME_HDCP_STATUS_SUCCESS ; + verify_rxcert_in.header.buffer_len = +WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN ; + + verify_rxcert_in.port.integrated_port_type = data->port_type; + verify_rxcert_in.port.physical_port =mei_get_ddi_index (data->port); + + verify_rxcert_in.cert_rx = rx_cert->cert_rx; +memcpy (verify_rxcert_in.r_rx, &rx_cert->r_rx,HDCP_2_2_RRX_LEN ); +memcpy (verify_rxcert_in.rx_caps, rx_cert->rx_caps,HDCP_2_2_RXCAPS_LEN ); + + byte =mei_cldev_send (cldev, (u8 *)&verify_rxcert_in, +sizeof (verify_rxcert_in)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_send failed: %zd\n" , byte); +return byte; + } + + byte =mei_cldev_recv (cldev, (u8 *)&verify_rxcert_out, +sizeof (verify_rxcert_out)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_recv failed: %zd\n" , byte); +return byte; + } + +if (verify_rxcert_out.header.status !=ME_HDCP_STATUS_SUCCESS ) { +dev_dbg (dev,"ME cmd 0x%08X Failed. Status: 0x%X\n" , +WIRED_VERIFY_RECEIVER_CERT , + verify_rxcert_out.header.status); +return -EIO ; + } + + *km_stored = !!verify_rxcert_out.km_stored; +if (verify_rxcert_out.km_stored) { + ek_pub_km->msg_id =HDCP_2_2_AKE_STORED_KM ; + *msg_sz =sizeof (struct hdcp2_ake_stored_km ); + }else { + ek_pub_km->msg_id =HDCP_2_2_AKE_NO_STORED_KM ; + *msg_sz =sizeof (struct hdcp2_ake_no_stored_km ); + } + +memcpy (ek_pub_km->e_kpub_km, &verify_rxcert_out.ekm_buff, +sizeof (verify_rxcert_out.ekm_buff)); + +return 0 ; +} +static const __attribute__((unused))struct i915_hdcp_component_ops mei_hdcp_ops = { .owner =THIS_MODULE , .initiate_hdcp2_session = mei_hdcp_initiate_session, - .verify_receiver_cert_prepare_km =NULL , + .verify_receiver_cert_prepare_km = + mei_hdcp_verify_receiver_cert_prepare_km, .verify_hprime =NULL , .store_pairing_info =NULL , .initiate_locality_check =NULL ,
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 6/16 misc/mei/hdcp: Verify H_prime
In reply to Ramalingam CRequests for the verification of AKE_Send_H_prime.
ME will calculate the H and comparing it with received H_Prime. The result will be returned as status.
Here AKE_Send_H_prime is a HDCP2.2 Authentication msg.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas] Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander] Styles and typos fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc Addition [Tomas]
memcpy for const length.
v9:
renamed func as mei_hdcp_* [Tomas] Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
--- drivers/misc/mei/hdcp/mei_hdcp.c | 58 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 57 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +57 -1
@@ -182,13 +182,69 @@ mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev,return 0 ; } +/** +* mei_hdcp_verify_hprime() - Verify AKE_Send_H_prime at ME FW. +* @dev: device corresponding to the mei_cl_device +* @data: Intel HW specific hdcp data +* @rx_hprime: AKE_Send_H_prime msg for ME FW verification +* +* Return: 0 on Success, <0 on Failure +*/ +static int +mei_hdcp_verify_hprime (struct device *dev,struct hdcp_port_data *data, +struct hdcp2_ake_send_hprime *rx_hprime) +{ +struct wired_cmd_ake_send_hprime_in send_hprime_in = { {0 } }; +struct wired_cmd_ake_send_hprime_out send_hprime_out = { {0 } }; +struct mei_cl_device *cldev; +ssize_t byte; + +if (!dev || !data || !rx_hprime) +return -EINVAL ; + + cldev =to_mei_cl_device (dev); + + send_hprime_in.header.api_version =HDCP_API_VERSION ; + send_hprime_in.header.command_id =WIRED_AKE_SEND_HPRIME ; + send_hprime_in.header.status =ME_HDCP_STATUS_SUCCESS ; + send_hprime_in.header.buffer_len =WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN ; + + send_hprime_in.port.integrated_port_type = data->port_type; + send_hprime_in.port.physical_port =mei_get_ddi_index (data->port); + +memcpy (send_hprime_in.h_prime, rx_hprime->h_prime, +HDCP_2_2_H_PRIME_LEN ); + + byte =mei_cldev_send (cldev, (u8 *)&send_hprime_in, +sizeof (send_hprime_in)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_send failed. %zd\n" , byte); +return byte; + } + + byte =mei_cldev_recv (cldev, (u8 *)&send_hprime_out, +sizeof (send_hprime_out)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_recv failed. %zd\n" , byte); +return byte; + } + +if (send_hprime_out.header.status !=ME_HDCP_STATUS_SUCCESS ) { +dev_dbg (dev,"ME cmd 0x%08X Failed. Status: 0x%X\n" , +WIRED_AKE_SEND_HPRIME , send_hprime_out.header.status); +return -EIO ; + } + +return 0 ; +} +static const __attribute__((unused))struct i915_hdcp_component_ops mei_hdcp_ops = { .owner =THIS_MODULE , .initiate_hdcp2_session = mei_hdcp_initiate_session, .verify_receiver_cert_prepare_km = mei_hdcp_verify_receiver_cert_prepare_km, - .verify_hprime =NULL , + .verify_hprime = mei_hdcp_verify_hprime, .store_pairing_info =NULL , .initiate_locality_check =NULL , .verify_lprime =NULL ,
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 7/16 misc/mei/hdcp: Store the HDCP Pairing info
In reply to Ramalingam CProvides Pairing info to ME to store.
Pairing is a process to fast track the subsequent authentication with the same HDCP sink.
On Success, received HDCP pairing info is stored in non-volatile memory of ME.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas] Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander] Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
memcpy for const length.
v9:
renamed func as mei_hdcp_* [Tomas] Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
--- drivers/misc/mei/hdcp/mei_hdcp.c | 60 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 59 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +59 -1
@@ -238,6 +238,64 @@ mei_hdcp_verify_hprime(struct device *dev, struct hdcp_port_data *data,return 0 ; } +/** +* mei_hdcp_store_pairing_info() - Store pairing info received at ME FW +* @dev: device corresponding to the mei_cl_device +* @data: Intel HW specific hdcp data +* @pairing_info: AKE_Send_Pairing_Info msg input to ME FW +* +* Return: 0 on Success, <0 on Failure +*/ +static int +mei_hdcp_store_pairing_info (struct device *dev,struct hdcp_port_data *data, +struct hdcp2_ake_send_pairing_info *pairing_info) +{ +struct wired_cmd_ake_send_pairing_info_in pairing_info_in = { {0 } }; +struct wired_cmd_ake_send_pairing_info_out pairing_info_out = { {0 } }; +struct mei_cl_device *cldev; +ssize_t byte; + +if (!dev || !data || !pairing_info) +return -EINVAL ; + + cldev =to_mei_cl_device (dev); + + pairing_info_in.header.api_version =HDCP_API_VERSION ; + pairing_info_in.header.command_id =WIRED_AKE_SEND_PAIRING_INFO ; + pairing_info_in.header.status =ME_HDCP_STATUS_SUCCESS ; + pairing_info_in.header.buffer_len = +WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN ; + + pairing_info_in.port.integrated_port_type = data->port_type; + pairing_info_in.port.physical_port =mei_get_ddi_index (data->port); + +memcpy (pairing_info_in.e_kh_km, pairing_info->e_kh_km, +HDCP_2_2_E_KH_KM_LEN ); + + byte =mei_cldev_send (cldev, (u8 *)&pairing_info_in, +sizeof (pairing_info_in)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_send failed. %zd\n" , byte); +return byte; + } + + byte =mei_cldev_recv (cldev, (u8 *)&pairing_info_out, +sizeof (pairing_info_out)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_recv failed. %zd\n" , byte); +return byte; + } + +if (pairing_info_out.header.status !=ME_HDCP_STATUS_SUCCESS ) { +dev_dbg (dev,"ME cmd 0x%08X failed. Status: 0x%X\n" , +WIRED_AKE_SEND_PAIRING_INFO , + pairing_info_out.header.status); +return -EIO ; + } + +return 0 ; +} +static const __attribute__((unused))struct i915_hdcp_component_ops mei_hdcp_ops = { .owner =THIS_MODULE ,
@@ -245,7 +303,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = { .verify_receiver_cert_prepare_km = mei_hdcp_verify_receiver_cert_prepare_km, .verify_hprime = mei_hdcp_verify_hprime, - .store_pairing_info = NULL, + .store_pairing_info = mei_hdcp_store_pairing_info, .initiate_locality_check = NULL, .verify_lprime = NULL, .get_session_key = NULL,
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 8/16 misc/mei/hdcp: Initiate Locality check
In reply to Ramalingam CRequests ME to start the second stage of HDCP2.2 authentication, called Locality Check.
On Success, ME FW will provide LC_Init message to send to hdcp sink.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas] Redundant comments and cast are removed [Tomas]
v4:
%zd used for ssize_t [Alexander] %s/return -1/return -EIO [Alexander] Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
v9:
renamed func as mei_hdcp_* [Tomas] Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
--- drivers/misc/mei/hdcp/mei_hdcp.c | 57 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 56 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +56 -1
@@ -296,6 +296,61 @@ mei_hdcp_store_pairing_info(struct device *dev, struct hdcp_port_data *data,return 0 ; } +/** +* mei_hdcp_initiate_locality_check() - Prepare LC_Init +* @dev: device corresponding to the mei_cl_device +* @data: Intel HW specific hdcp data +* @lc_init_data: LC_Init msg output +* +* Return: 0 on Success, <0 on Failure +*/ +static int +mei_hdcp_initiate_locality_check (struct device *dev, +struct hdcp_port_data *data, +struct hdcp2_lc_init *lc_init_data) +{ +struct wired_cmd_init_locality_check_in lc_init_in = { {0 } }; +struct wired_cmd_init_locality_check_out lc_init_out = { {0 } }; +struct mei_cl_device *cldev; +ssize_t byte; + +if (!dev || !data || !lc_init_data) +return -EINVAL ; + + cldev =to_mei_cl_device (dev); + + lc_init_in.header.api_version =HDCP_API_VERSION ; + lc_init_in.header.command_id =WIRED_INIT_LOCALITY_CHECK ; + lc_init_in.header.status =ME_HDCP_STATUS_SUCCESS ; + lc_init_in.header.buffer_len =WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN ; + + lc_init_in.port.integrated_port_type = data->port_type; + lc_init_in.port.physical_port =mei_get_ddi_index (data->port); + + byte =mei_cldev_send (cldev, (u8 *)&lc_init_in,sizeof (lc_init_in)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_send failed. %zd\n" , byte); +return byte; + } + + byte =mei_cldev_recv (cldev, (u8 *)&lc_init_out,sizeof (lc_init_out)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_recv failed. %zd\n" , byte); +return byte; + } + +if (lc_init_out.header.status !=ME_HDCP_STATUS_SUCCESS ) { +dev_dbg (dev,"ME cmd 0x%08X Failed. status: 0x%X\n" , +WIRED_INIT_LOCALITY_CHECK , lc_init_out.header.status); +return -EIO ; + } + + lc_init_data->msg_id =HDCP_2_2_LC_INIT ; +memcpy (lc_init_data->r_n, lc_init_out.r_n,HDCP_2_2_RN_LEN ); + +return 0 ; +} +static const __attribute__((unused))struct i915_hdcp_component_ops mei_hdcp_ops = { .owner =THIS_MODULE ,
@@ -304,7 +359,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = { mei_hdcp_verify_receiver_cert_prepare_km, .verify_hprime = mei_hdcp_verify_hprime, .store_pairing_info = mei_hdcp_store_pairing_info, - .initiate_locality_check = NULL, + .initiate_locality_check = mei_hdcp_initiate_locality_check, .verify_lprime = NULL, .get_session_key = NULL, .repeater_check_flow_prepare_ack = NULL,
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v15 9/16 misc/mei/hdcp: Verify L_prime
In reply to Ramalingam CRequest to ME to verify the LPrime received from HDCP sink.
On Success, ME FW will verify the received Lprime by calculating and comparing with L.
This represents the completion of Locality Check.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas] Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander] Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
memcpy for const length.
v9:
renamed func as mei_hdcp_* [Tomas] Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
--- drivers/misc/mei/hdcp/mei_hdcp.c | 60 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 59 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +59 -1
@@ -351,6 +351,64 @@ mei_hdcp_initiate_locality_check(struct device *dev,return 0 ; } +/** +* mei_hdcp_verify_lprime() - Verify lprime. +* @dev: device corresponding to the mei_cl_device +* @data: Intel HW specific hdcp data +* @rx_lprime: LC_Send_L_prime msg for ME FW verification +* +* Return: 0 on Success, <0 on Failure +*/ +static int +mei_hdcp_verify_lprime (struct device *dev,struct hdcp_port_data *data, +struct hdcp2_lc_send_lprime *rx_lprime) +{ +struct wired_cmd_validate_locality_in verify_lprime_in = { {0 } }; +struct wired_cmd_validate_locality_out verify_lprime_out = { {0 } }; +struct mei_cl_device *cldev; +ssize_t byte; + +if (!dev || !data || !rx_lprime) +return -EINVAL ; + + cldev =to_mei_cl_device (dev); + + verify_lprime_in.header.api_version =HDCP_API_VERSION ; + verify_lprime_in.header.command_id =WIRED_VALIDATE_LOCALITY ; + verify_lprime_in.header.status =ME_HDCP_STATUS_SUCCESS ; + verify_lprime_in.header.buffer_len = +WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN ; + + verify_lprime_in.port.integrated_port_type = data->port_type; + verify_lprime_in.port.physical_port =mei_get_ddi_index (data->port); + +memcpy (verify_lprime_in.l_prime, rx_lprime->l_prime, +HDCP_2_2_L_PRIME_LEN ); + + byte =mei_cldev_send (cldev, (u8 *)&verify_lprime_in, +sizeof (verify_lprime_in)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_send failed. %zd\n" , byte); +return byte; + } + + byte =mei_cldev_recv (cldev, (u8 *)&verify_lprime_out, +sizeof (verify_lprime_out)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_recv failed. %zd\n" , byte); +return byte; + } + +if (verify_lprime_out.header.status !=ME_HDCP_STATUS_SUCCESS ) { +dev_dbg (dev,"ME cmd 0x%08X failed. status: 0x%X\n" , +WIRED_VALIDATE_LOCALITY , + verify_lprime_out.header.status); +return -EIO ; + } + +return 0 ; +} +static const __attribute__((unused))struct i915_hdcp_component_ops mei_hdcp_ops = { .owner =THIS_MODULE ,
@@ -360,7 +418,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = { .verify_hprime = mei_hdcp_verify_hprime, .store_pairing_info = mei_hdcp_store_pairing_info, .initiate_locality_check = mei_hdcp_initiate_locality_check, - .verify_lprime = NULL, + .verify_lprime = mei_hdcp_verify_lprime, .get_session_key = NULL, .repeater_check_flow_prepare_ack = NULL, .verify_mprime = NULL,
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v15 10/16 misc/mei/hdcp: Prepare Session Key
In reply to Ramalingam CRequest to ME to prepare the encrypted session key.
On Success, ME provides Encrypted session key. Function populates the HDCP2.2 authentication msg SKE_Send_Eks.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas] Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander] Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
v9:
renamed func as mei_hdcp_* [Tomas] Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
--- drivers/misc/mei/hdcp/mei_hdcp.c | 59 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 58 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +58 -1
@@ -409,6 +409,63 @@ mei_hdcp_verify_lprime(struct device *dev, struct hdcp_port_data *data,return 0 ; } +/** +* mei_hdcp_get_session_key() - Prepare SKE_Send_Eks. +* @dev: device corresponding to the mei_cl_device +* @data: Intel HW specific hdcp data +* @ske_data: SKE_Send_Eks msg output from ME FW. +* +* Return: 0 on Success, <0 on Failure +*/ +static int mei_hdcp_get_session_key (struct device *dev, +struct hdcp_port_data *data, +struct hdcp2_ske_send_eks *ske_data) +{ +struct wired_cmd_get_session_key_in get_skey_in = { {0 } }; +struct wired_cmd_get_session_key_out get_skey_out = { {0 } }; +struct mei_cl_device *cldev; +ssize_t byte; + +if (!dev || !data || !ske_data) +return -EINVAL ; + + cldev =to_mei_cl_device (dev); + + get_skey_in.header.api_version =HDCP_API_VERSION ; + get_skey_in.header.command_id =WIRED_GET_SESSION_KEY ; + get_skey_in.header.status =ME_HDCP_STATUS_SUCCESS ; + get_skey_in.header.buffer_len =WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN ; + + get_skey_in.port.integrated_port_type = data->port_type; + get_skey_in.port.physical_port =mei_get_ddi_index (data->port); + + byte =mei_cldev_send (cldev, (u8 *)&get_skey_in,sizeof (get_skey_in)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_send failed. %zd\n" , byte); +return byte; + } + + byte =mei_cldev_recv (cldev, (u8 *)&get_skey_out,sizeof (get_skey_out)); + +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_recv failed. %zd\n" , byte); +return byte; + } + +if (get_skey_out.header.status !=ME_HDCP_STATUS_SUCCESS ) { +dev_dbg (dev,"ME cmd 0x%08X failed. status: 0x%X\n" , +WIRED_GET_SESSION_KEY , get_skey_out.header.status); +return -EIO ; + } + + ske_data->msg_id =HDCP_2_2_SKE_SEND_EKS ; +memcpy (ske_data->e_dkey_ks, get_skey_out.e_dkey_ks, +HDCP_2_2_E_DKEY_KS_LEN ); +memcpy (ske_data->riv, get_skey_out.r_iv,HDCP_2_2_RIV_LEN ); + +return 0 ; +} +static const __attribute__((unused))struct i915_hdcp_component_ops mei_hdcp_ops = { .owner =THIS_MODULE ,
@@ -419,7 +476,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = { .store_pairing_info = mei_hdcp_store_pairing_info, .initiate_locality_check = mei_hdcp_initiate_locality_check, .verify_lprime = mei_hdcp_verify_lprime, - .get_session_key = NULL, + .get_session_key = mei_hdcp_get_session_key, .repeater_check_flow_prepare_ack = NULL, .verify_mprime = NULL, .enable_hdcp_authentication = NULL,
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 11/16 misc/mei/hdcp: Repeater topology verification and ack
In reply to Ramalingam CRequest ME to verify the downstream topology information received.
ME FW will validate the Repeaters receiver id list and downstream topology.
On Success ME FW will provide the Least Significant 128bits of VPrime, which forms the repeater ack.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas] Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander] Style and typos fixed [Uma]
v5: Rebased.
v6: Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
v9:
renamed func as mei_hdcp_* [Tomas] Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
--- drivers/misc/mei/hdcp/mei_hdcp.c | 77 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 76 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +76 -1
@@ -466,6 +466,80 @@ static int mei_hdcp_get_session_key(struct device *dev,return 0 ; } +/** +* mei_hdcp_repeater_check_flow_prepare_ack() - Validate the Downstream topology +* and prepare rep_ack. +* @dev: device corresponding to the mei_cl_device +* @data: Intel HW specific hdcp data +* @rep_topology: Receiver ID List to be validated +* @rep_send_ack : repeater ack from ME FW. +* +* Return: 0 on Success, <0 on Failure +*/ +static int +mei_hdcp_repeater_check_flow_prepare_ack (struct device *dev, +struct hdcp_port_data *data, +struct hdcp2_rep_send_receiverid_list + *rep_topology, +struct hdcp2_rep_send_ack + *rep_send_ack) +{ +struct wired_cmd_verify_repeater_in verify_repeater_in = { {0 } }; +struct wired_cmd_verify_repeater_out verify_repeater_out = { {0 } }; +struct mei_cl_device *cldev; +ssize_t byte; + +if (!dev || !rep_topology || !rep_send_ack || !data) +return -EINVAL ; + + cldev =to_mei_cl_device (dev); + + verify_repeater_in.header.api_version =HDCP_API_VERSION ; + verify_repeater_in.header.command_id =WIRED_VERIFY_REPEATER ; + verify_repeater_in.header.status =ME_HDCP_STATUS_SUCCESS ; + verify_repeater_in.header.buffer_len = +WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN ; + + verify_repeater_in.port.integrated_port_type = data->port_type; + verify_repeater_in.port.physical_port =mei_get_ddi_index (data->port); + +memcpy (verify_repeater_in.rx_info, rep_topology->rx_info, +HDCP_2_2_RXINFO_LEN ); +memcpy (verify_repeater_in.seq_num_v, rep_topology->seq_num_v, +HDCP_2_2_SEQ_NUM_LEN ); +memcpy (verify_repeater_in.v_prime, rep_topology->v_prime, +HDCP_2_2_V_PRIME_HALF_LEN ); +memcpy (verify_repeater_in.receiver_ids, rep_topology->receiver_ids, +HDCP_2_2_RECEIVER_IDS_MAX_LEN ); + + byte =mei_cldev_send (cldev, (u8 *)&verify_repeater_in, +sizeof (verify_repeater_in)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_send failed. %zd\n" , byte); +return byte; + } + + byte =mei_cldev_recv (cldev, (u8 *)&verify_repeater_out, +sizeof (verify_repeater_out)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_recv failed. %zd\n" , byte); +return byte; + } + +if (verify_repeater_out.header.status !=ME_HDCP_STATUS_SUCCESS ) { +dev_dbg (dev,"ME cmd 0x%08X failed. status: 0x%X\n" , +WIRED_VERIFY_REPEATER , + verify_repeater_out.header.status); +return -EIO ; + } + +memcpy (rep_send_ack->v, verify_repeater_out.v, +HDCP_2_2_V_PRIME_HALF_LEN ); + rep_send_ack->msg_id =HDCP_2_2_REP_SEND_ACK ; + +return 0 ; +} +static const __attribute__((unused))struct i915_hdcp_component_ops mei_hdcp_ops = { .owner =THIS_MODULE ,
@@ -477,7 +551,8 @@ struct i915_hdcp_component_ops mei_hdcp_ops = { .initiate_locality_check = mei_hdcp_initiate_locality_check, .verify_lprime = mei_hdcp_verify_lprime, .get_session_key = mei_hdcp_get_session_key, - .repeater_check_flow_prepare_ack = NULL, + .repeater_check_flow_prepare_ack = + mei_hdcp_repeater_check_flow_prepare_ack, .verify_mprime = NULL, .enable_hdcp_authentication = NULL, .close_hdcp_session = NULL,
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v15 12/16 misc/mei/hdcp: Verify M_prime
In reply to Ramalingam CRequest to ME to verify the M_Prime received from the HDCP sink.
ME FW will calculate the M and compare with M_prime received as part of RepeaterAuth_Stream_Ready, which is HDCP2.2 protocol msg.
On successful completion of this stage, downstream propagation of the stream management info is completed.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas] Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander] endianness conversion func is moved to drm_hdcp.h [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas] drm_hdcp2_u32_to_seq_num() is used for u32 to seq_num.
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
%s/__swab16/cpu_to_be16 [Tomas]
--- drivers/misc/mei/hdcp/mei_hdcp.c | 67 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 66 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +66 -1
@@ -540,6 +540,71 @@ mei_hdcp_repeater_check_flow_prepare_ack(struct device *dev,return 0 ; } +/** +* mei_hdcp_verify_mprime() - Verify mprime. +* @dev: device corresponding to the mei_cl_device +* @data: Intel HW specific hdcp data +* @stream_ready: RepeaterAuth_Stream_Ready msg for ME FW verification. +* +* Return: 0 on Success, <0 on Failure +*/ +static int mei_hdcp_verify_mprime (struct device *dev, +struct hdcp_port_data *data, +struct hdcp2_rep_stream_ready *stream_ready) +{ +struct wired_cmd_repeater_auth_stream_req_in + verify_mprime_in = { {0 } }; +struct wired_cmd_repeater_auth_stream_req_out + verify_mprime_out = { {0 } }; +struct mei_cl_device *cldev; +ssize_t byte; + +if (!dev || !stream_ready || !data) +return -EINVAL ; + + cldev =to_mei_cl_device (dev); + + verify_mprime_in.header.api_version =HDCP_API_VERSION ; + verify_mprime_in.header.command_id =WIRED_REPEATER_AUTH_STREAM_REQ ; + verify_mprime_in.header.status =ME_HDCP_STATUS_SUCCESS ; + verify_mprime_in.header.buffer_len = +WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_MIN_IN ; + + verify_mprime_in.port.integrated_port_type = data->port_type; + verify_mprime_in.port.physical_port =mei_get_ddi_index (data->port); + +memcpy (verify_mprime_in.m_prime, stream_ready->m_prime, +HDCP_2_2_MPRIME_LEN ); +drm_hdcp2_u32_to_seq_num (verify_mprime_in.seq_num_m, data->seq_num_m); +memcpy (verify_mprime_in.streams, data->streams, + (data->k *sizeof (struct hdcp2_streamid_type ))); + + verify_mprime_in.k =cpu_to_be16 (data->k); + + byte =mei_cldev_send (cldev, (u8 *)&verify_mprime_in, +sizeof (verify_mprime_in)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_send failed. %zd\n" , byte); +return byte; + } + + byte =mei_cldev_recv (cldev, (u8 *)&verify_mprime_out, +sizeof (verify_mprime_out)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_recv failed. %zd\n" , byte); +return byte; + } + +if (verify_mprime_out.header.status !=ME_HDCP_STATUS_SUCCESS ) { +dev_dbg (dev,"ME cmd 0x%08X failed. status: 0x%X\n" , +WIRED_REPEATER_AUTH_STREAM_REQ , + verify_mprime_out.header.status); +return -EIO ; + } + +return 0 ; +} +static const __attribute__((unused))struct i915_hdcp_component_ops mei_hdcp_ops = { .owner =THIS_MODULE ,
@@ -553,7 +618,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = { .get_session_key = mei_hdcp_get_session_key, .repeater_check_flow_prepare_ack = mei_hdcp_repeater_check_flow_prepare_ack, - .verify_mprime = NULL, + .verify_mprime = mei_hdcp_verify_mprime, .enable_hdcp_authentication = NULL, .close_hdcp_session = NULL, };
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 13/16 misc/mei/hdcp: Enabling the HDCP authentication
In reply to Ramalingam CRequest to ME to configure a port as authenticated.
On Success, ME FW will mark the port as authenticated and provides HDCP cipher with the encryption keys.
Enabling the Authentication can be requested once all stages of HDCP2.2 authentication is completed by interacting with ME FW.
Only after this stage, driver can enable the HDCP encryption for the port, through HW registers.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas] Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander] Style and typos fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebased.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
v9:
renamed func as mei_hdcp_* [Tomas] Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
--- drivers/misc/mei/hdcp/mei_hdcp.c | 55 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 54 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +54 -1
@@ -605,6 +605,59 @@ static int mei_hdcp_verify_mprime(struct device *dev,return 0 ; } +/** +* mei_hdcp_enable_authentication() - Mark a port as authenticated +* through ME FW +* @dev: device corresponding to the mei_cl_device +* @data: Intel HW specific hdcp data +* +* Return: 0 on Success, <0 on Failure +*/ +static int mei_hdcp_enable_authentication (struct device *dev, +struct hdcp_port_data *data) +{ +struct wired_cmd_enable_auth_in enable_auth_in = { {0 } }; +struct wired_cmd_enable_auth_out enable_auth_out = { {0 } }; +struct mei_cl_device *cldev; +ssize_t byte; + +if (!dev || !data) +return -EINVAL ; + + cldev =to_mei_cl_device (dev); + + enable_auth_in.header.api_version =HDCP_API_VERSION ; + enable_auth_in.header.command_id =WIRED_ENABLE_AUTH ; + enable_auth_in.header.status =ME_HDCP_STATUS_SUCCESS ; + enable_auth_in.header.buffer_len =WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN ; + + enable_auth_in.port.integrated_port_type = data->port_type; + enable_auth_in.port.physical_port =mei_get_ddi_index (data->port); + enable_auth_in.stream_type = data->streams[0 ].stream_type; + + byte =mei_cldev_send (cldev, (u8 *)&enable_auth_in, +sizeof (enable_auth_in)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_send failed. %zd\n" , byte); +return byte; + } + + byte =mei_cldev_recv (cldev, (u8 *)&enable_auth_out, +sizeof (enable_auth_out)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_recv failed. %zd\n" , byte); +return byte; + } + +if (enable_auth_out.header.status !=ME_HDCP_STATUS_SUCCESS ) { +dev_dbg (dev,"ME cmd 0x%08X failed. status: 0x%X\n" , +WIRED_ENABLE_AUTH , enable_auth_out.header.status); +return -EIO ; + } + +return 0 ; +} +static const __attribute__((unused))struct i915_hdcp_component_ops mei_hdcp_ops = { .owner =THIS_MODULE ,
@@ -619,7 +672,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = { .repeater_check_flow_prepare_ack = mei_hdcp_repeater_check_flow_prepare_ack, .verify_mprime = mei_hdcp_verify_mprime, - .enable_hdcp_authentication = NULL, + .enable_hdcp_authentication = mei_hdcp_enable_authentication, .close_hdcp_session = NULL, };
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v15 14/16 misc/mei/hdcp: Closing wired HDCP2.2 Tx Session
In reply to Ramalingam CRequest the ME to terminate the HDCP2.2 session for a port.
On Success, ME FW will mark the intel port as Deauthenticated and terminate the wired HDCP2.2 Tx session started due to the cmd WIRED_INITIATE_HDCP2_SESSION.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas] Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander] Style and typos fixed [Uma]
v5:
Extra line is removed.
v6:
Collected the Rb-ed by.
Rebased.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition.[Tomas]
v9:
renamed func as mei_hdcp_* [Tomas] Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
--- drivers/misc/mei/hdcp/mei_hdcp.c | 55 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 54 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +54 -1
@@ -658,6 +658,59 @@ static int mei_hdcp_enable_authentication(struct device *dev,return 0 ; } +/** +* mei_hdcp_close_session() - Close the Wired HDCP Tx session of ME FW per port. +* This also disables the authenticated state of the port. +* @dev: device corresponding to the mei_cl_device +* @data: Intel HW specific hdcp data +* +* Return: 0 on Success, <0 on Failure +*/ +static int +mei_hdcp_close_session (struct device *dev,struct hdcp_port_data *data) +{ +struct wired_cmd_close_session_in session_close_in = { {0 } }; +struct wired_cmd_close_session_out session_close_out = { {0 } }; +struct mei_cl_device *cldev; +ssize_t byte; + +if (!dev || !data) +return -EINVAL ; + + cldev =to_mei_cl_device (dev); + + session_close_in.header.api_version =HDCP_API_VERSION ; + session_close_in.header.command_id =WIRED_CLOSE_SESSION ; + session_close_in.header.status =ME_HDCP_STATUS_SUCCESS ; + session_close_in.header.buffer_len = +WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN ; + + session_close_in.port.integrated_port_type = data->port_type; + session_close_in.port.physical_port =mei_get_ddi_index (data->port); + + byte =mei_cldev_send (cldev, (u8 *)&session_close_in, +sizeof (session_close_in)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_send failed. %zd\n" , byte); +return byte; + } + + byte =mei_cldev_recv (cldev, (u8 *)&session_close_out, +sizeof (session_close_out)); +if (byte <0 ) { +dev_dbg (dev,"mei_cldev_recv failed. %zd\n" , byte); +return byte; + } + +if (session_close_out.header.status !=ME_HDCP_STATUS_SUCCESS ) { +dev_dbg (dev,"Session Close Failed. status: 0x%X\n" , + session_close_out.header.status); +return -EIO ; + } + +return 0 ; +} +static const __attribute__((unused))struct i915_hdcp_component_ops mei_hdcp_ops = { .owner =THIS_MODULE ,
@@ -673,7 +726,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = { mei_hdcp_repeater_check_flow_prepare_ack, .verify_mprime = mei_hdcp_verify_mprime, .enable_hdcp_authentication = mei_hdcp_enable_authentication, - .close_hdcp_session = NULL, + .close_hdcp_session = mei_hdcp_close_session, }; static int mei_hdcp_probe(struct mei_cl_device *cldev,
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 15/16 misc/mei/hdcp: Component framework for I915 Interface
In reply to Ramalingam CMei hdcp driver is designed as component slave for the I915 component master.
v2: Rebased.
v3:
Notifier chain is adopted for cldev state update [Tomas]
v4:
Made static dummy functions as inline in mei_hdcp.h
API for polling client device status
IS_ENABLED used in header, for config status for mei_hdcp.
v5:
Replacing the notifier with component framework. [Daniel]
v6:
Rebased on the I915 comp master redesign.
v7:
mei_hdcp_component_registered is made static [Uma]
Need for global static variable mei_cldev is removed.
v8:
master comp is added to be matched with i915 subcomponent [daniel]
v9:
only comp_master is set and retrieved as driver_data [Daniel] Reviewed-by Daniel.
v10:
small corrections at probe [Tomas]
v11:
bind and unbind logs are made as debug logs [Tomas] cldev_enable failure is handled [Tomas]
--- drivers/misc/mei/hdcp/mei_hdcp.c | 86 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 83 insertions(+), 3 deletions(-)
drivers/misc/mei/hdcp/mei_hdcp.c +83 -3
@@ -23,6 +23,7 @@#include <linux/slab.h> #include <linux/uuid.h> #include <linux/mei_cl_bus.h> +#include <linux/component.h> #include <drm/drm_connector.h> #include <drm/i915_component.h> #include <drm/i915_mei_hdcp_interface.h>
@@ -711,8 +712,7 @@ mei_hdcp_close_session(struct device *dev, struct hdcp_port_data *data)return 0 ; } -static const __attribute__((unused)) -struct i915_hdcp_component_ops mei_hdcp_ops = { +static const struct i915_hdcp_component_ops mei_hdcp_ops = { .owner =THIS_MODULE , .initiate_hdcp2_session = mei_hdcp_initiate_session, .verify_receiver_cert_prepare_km =
@@ -729,20 +729,100 @@ struct i915_hdcp_component_ops mei_hdcp_ops = { .close_hdcp_session = mei_hdcp_close_session, }; +static int mei_component_master_bind (struct device *dev) +{ +struct mei_cl_device *cldev =to_mei_cl_device (dev); +struct i915_hdcp_comp_master *comp_master = +mei_cldev_get_drvdata (cldev); +int ret; + +dev_dbg (dev,"%s\n" , __func__); + comp_master->ops = &mei_hdcp_ops; + comp_master->mei_dev = dev; + ret =component_bind_all (dev, comp_master); +if (ret <0 ) +return ret; + +return 0 ; +} + +static void mei_component_master_unbind (struct device *dev) +{ +struct mei_cl_device *cldev =to_mei_cl_device (dev); +struct i915_hdcp_comp_master *comp_master = +mei_cldev_get_drvdata (cldev); + +dev_dbg (dev,"%s\n" , __func__); +component_unbind_all (dev, comp_master); +} + +static const struct component_master_ops mei_component_master_ops = { + .bind = mei_component_master_bind, + .unbind = mei_component_master_unbind, +}; + +static int mei_hdcp_component_match (struct device *dev,int subcomponent, +void *data) +{ +return !strcmp (dev->driver->name,"i915" ) && + subcomponent ==I915_COMPONENT_HDCP ; +} +static int mei_hdcp_probe (struct mei_cl_device *cldev,const struct mei_cl_device_id *id) { +struct i915_hdcp_comp_master *comp_master; +struct component_match *master_match;int ret; ret =mei_cldev_enable (cldev); -if (ret <0 ) +if (ret <0 ) {dev_err (&cldev->dev,"mei_cldev_enable Failed. %d\n" , ret); + goto enable_err_exit; + } + + comp_master =kzalloc (sizeof (*comp_master),GFP_KERNEL ); +if (!comp_master) { + ret = -ENOMEM ; + goto err_exit; + } + + master_match =NULL ; +component_match_add_typed (&cldev->dev, &master_match, + mei_hdcp_component_match, comp_master); +if (IS_ERR_OR_NULL (master_match)) { + ret = -ENOMEM ; + goto err_exit; + } + +mei_cldev_set_drvdata (cldev, comp_master); + ret =component_master_add_with_match (&cldev->dev, + &mei_component_master_ops, + master_match); +if (ret <0 ) { +dev_err (&cldev->dev,"Master comp add failed %d\n" , ret); + goto err_exit; + } +return 0 ; + +err_exit: +mei_cldev_set_drvdata (cldev,NULL ); +kfree (comp_master); +mei_cldev_disable (cldev); +enable_err_exit:return ret; }static int mei_hdcp_remove (struct mei_cl_device *cldev) { +struct i915_hdcp_comp_master *comp_master = +mei_cldev_get_drvdata (cldev); + +component_master_del (&cldev->dev, &mei_component_master_ops); +kfree (comp_master); +mei_cldev_set_drvdata (cldev,NULL ); +return mei_cldev_disable (cldev); }
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v15 16/16 FOR_TEST_ONLY: i915/Kconfig: Select mei_hdcp by I915
In reply to Ramalingam CFOR TESTING PURPOSE ONLY.
By default INTEL_MEI_HDCP is set to y. This patch is created to test the interface between I915 and MEI_HDCP.
--- drivers/misc/mei/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/misc/mei/Kconfig +1 -0
@@ -48,6 +48,7 @@ config INTEL_MEI_HDCP tristate "Intel HDCP2.2 services of ME Interface" select INTEL_MEI_ME depends on DRM_I915 + default y help MEI Support for HDCP2.2 Services on Intel platforms.
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for drm/i915: Implement HDCP2.2
In reply to Ramalingam C== Series Details ==
== Series Details ==
Series: drm/i915: Implement HDCP2.2
URL : https://patchwork.freedesktop.org/series/57037/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 37c5e6646c75 mei: bus: whitelist hdcp client f34e15960964 misc/mei/hdcp: Client driver for HDCP application -:82: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating? #82: new file mode 100644
total: 0 errors, 1 warnings, 0 checks, 89 lines checked8273d681e1f3 misc/mei/hdcp: Define ME FW interface for HDCP2.2
-:32: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating? #32:
new file mode 100644
total: 0 errors, 1 warnings, 0 checks, 366 lines checked af983c28bf34 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session ff2553c3a6f5 misc/mei/hdcp: Verify Receiver Cert and prepare km 9b84979b1d91 misc/mei/hdcp: Verify H_primeb5baa6c83cb8 misc/mei/hdcp: Store the HDCP Pairing info a7863139ce44 misc/mei/hdcp: Initiate Locality check a634f8765faf misc/mei/hdcp: Verify L_prime529557441fa3 misc/mei/hdcp: Prepare Session Key 83d08f79c09a misc/mei/hdcp: Repeater topology verification and ack f5b5097eb8c9 misc/mei/hdcp: Verify M_primefeb33c82eea3 misc/mei/hdcp: Enabling the HDCP authentication 825905dcdbc0 misc/mei/hdcp: Closing wired HDCP2.2 Tx Session 9b65b900cd0d misc/mei/hdcp: Component framework for I915 Interface a0223ee5fab5 FOR_TEST_ONLY: i915/Kconfig: Select mei_hdcp by I915
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.SPARSE: warning for drm/i915: Implement HDCP2.2
In reply to Ramalingam C== Series Details ==
== Series Details ==
Series: drm/i915: Implement HDCP2.2
URL : https://patchwork.freedesktop.org/series/57037/
State : warning
== Summary ==
$ dim sparse origin/drm-tip Sparse version: v0.5.2 Commit: mei: bus: whitelist hdcp client Okay!
Commit: misc/mei/hdcp: Client driver for HDCP application +Error in reading or end of file.
Commit: misc/mei/hdcp: Define ME FW interface for HDCP2.2 Okay!
Commit: misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session Okay!
Commit: misc/mei/hdcp: Verify Receiver Cert and prepare km Okay!
Commit: misc/mei/hdcp: Verify H_prime
Okay!
Commit: misc/mei/hdcp: Store the HDCP Pairing info Okay!
Commit: misc/mei/hdcp: Initiate Locality check
Okay!
Commit: misc/mei/hdcp: Verify L_prime
Okay!
Commit: misc/mei/hdcp: Prepare Session Key
Okay!
Commit: misc/mei/hdcp: Repeater topology verification and ack Okay!
Commit: misc/mei/hdcp: Verify M_prime
Okay!
Commit: misc/mei/hdcp: Enabling the HDCP authentication Okay!
Commit: misc/mei/hdcp: Closing wired HDCP2.2 Tx Session Okay!
Commit: misc/mei/hdcp: Component framework for I915 Interface Okay!
Commit: FOR_TEST_ONLY: i915/Kconfig: Select mei_hdcp by I915 Okay!
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915: Implement HDCP2.2
In reply to Ramalingam C== Series Details ==
== Series Details ==
Series: drm/i915: Implement HDCP2.2
URL : https://patchwork.freedesktop.org/series/57037/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_5650 -> Patchwork_12276
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_12276 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_12276, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/57037/revisions/1/mbox/
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_12276:
### IGT changes ###
#### Possible regressions ####
* igt@i915_module_load@reload-with-fault-injection:
- fi-skl-6770hq: PASS -> DMESG-WARN +1
* igt@pm_rpm@module-reload:
- fi-skl-6770hq: NOTRUN -> DMESG-WARN
Known issues
------------
Here are the changes found in Patchwork_12276 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_suspend@basic-s4-devices:
- fi-kbl-7560u: PASS -> INCOMPLETE [fdo#107139]
* igt@kms_busy@basic-flip-b:
- fi-gdg-551: PASS -> FAIL [fdo#103182]
* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: PASS -> FAIL [fdo#109485]
* igt@kms_content_protection@atomic:
- fi-skl-gvtdvm: NOTRUN -> FAIL [fdo#108597] / [fdo#108739] +1
- fi-ivb-3520m: NOTRUN -> SKIP [fdo#109271] +4
- fi-whl-u: NOTRUN -> SKIP [fdo#109271] +1
- fi-icl-u2: NOTRUN -> FAIL [fdo#108597] +1
- fi-bdw-5557u: NOTRUN -> SKIP [fdo#109271] +1
- fi-hsw-peppy: NOTRUN -> SKIP [fdo#109271] +1
- fi-hsw-4770r: NOTRUN -> SKIP [fdo#109271] +1
- fi-byt-n2820: NOTRUN -> SKIP [fdo#109271] +2
- fi-skl-6600u: NOTRUN -> SKIP [fdo#109271] +1
- fi-apl-guc: NOTRUN -> FAIL [fdo#108597] / [fdo#108739] +1* igt@kms_content_protection@legacy:
- fi-cfl-guc: NOTRUN -> SKIP [fdo#109271] +2
- fi-skl-6770hq: NOTRUN -> FAIL [fdo#108597] / [fdo#108739]
- fi-bsw-kefka: NOTRUN -> SKIP [fdo#109271] +1
- fi-bxt-j4205: NOTRUN -> SKIP [fdo#109271] +2
- fi-kbl-r: NOTRUN -> SKIP [fdo#109271] +1
- fi-cfl-8109u: NOTRUN -> FAIL [fdo#108739] +1
- fi-kbl-guc: NOTRUN -> SKIP [fdo#109271] +5
- fi-gdg-551: NOTRUN -> SKIP [fdo#109271] +6
- fi-hsw-4770: NOTRUN -> SKIP [fdo#109271] +2
- fi-bsw-n3050: NOTRUN -> SKIP [fdo#109271] +2 * igt@kms_flip@basic-flip-vs-dpms:
- fi-skl-6770hq: PASS -> SKIP [fdo#109271] +31
* igt@kms_pipe_crc_basic@bad-source:
- fi-skl-6770hq: PASS -> DMESG-WARN [fdo#108833]
* igt@pm_backlight@basic-brightness:
- fi-bdw-5557u: NOTRUN -> SKIP [fdo#109271] / [fdo#109527]
- fi-kbl-7567u: NOTRUN -> SKIP [fdo#109271]
- fi-skl-guc: NOTRUN -> SKIP [fdo#109271] +2
- fi-cfl-8109u: NOTRUN -> SKIP [fdo#109271]
- fi-cfl-8700k: NOTRUN -> SKIP [fdo#109271] +2
- fi-ilk-650: NOTRUN -> SKIP [fdo#109271] / [fdo#109527]
- fi-elk-e7500: NOTRUN -> SKIP [fdo#109271] / [fdo#109527]
- fi-kbl-x1275: NOTRUN -> SKIP [fdo#109271]
- fi-kbl-7500u: NOTRUN -> SKIP [fdo#109271] / [fdo#109527]
- fi-apl-guc: NOTRUN -> SKIP [fdo#109271]
- fi-skl-6770hq: NOTRUN -> SKIP [fdo#109271] / [fdo#109527]
- fi-skl-6260u: NOTRUN -> SKIP [fdo#109271]
- fi-hsw-4770r: NOTRUN -> SKIP [fdo#109271] / [fdo#109527]
- fi-skl-6700k2: NOTRUN -> SKIP [fdo#109271]* igt@pm_rpm@basic-pci-d3-state:
- fi-pnv-d510: NOTRUN -> SKIP [fdo#109271] +6
- fi-skl-6770hq: NOTRUN -> SKIP [fdo#109271] +2
- fi-kbl-8809g: NOTRUN -> SKIP [fdo#109271] +4* igt@pm_rpm@basic-rte:
- fi-skl-gvtdvm: NOTRUN -> SKIP [fdo#109271] +3
- fi-elk-e7500: NOTRUN -> SKIP [fdo#109271] +5
- fi-ilk-650: NOTRUN -> SKIP [fdo#109271] +5
- fi-bdw-gvtdvm: NOTRUN -> SKIP [fdo#109271] +5
- fi-snb-2520m: NOTRUN -> SKIP [fdo#109271] +4 * igt@pm_rpm@module-reload:
- fi-blb-e6850: NOTRUN -> SKIP [fdo#109271] +6
- fi-ivb-3770: NOTRUN -> SKIP [fdo#109271] +5
* igt@pm_rps@basic-api:
- fi-bwr-2160: NOTRUN -> SKIP [fdo#109271] +6
#### Possible fixes ####
* igt@i915_selftest@live_execlists:
- fi-apl-guc: INCOMPLETE [fdo#103927] / [fdo#109720] -> PASS
* igt@kms_busy@basic-flip-a:
- fi-gdg-551: FAIL [fdo#103182] -> PASS
* igt@prime_vgem@basic-fence-flip:
- fi-ilk-650: FAIL [fdo#104008] -> PASS
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104008]: https://bugs.freedesktop.org/show_bug.cgi?id=104008
[fdo#105998]: https://bugs.freedesktop.org/show_bug.cgi?id=105998
[fdo#107139]: https://bugs.freedesktop.org/show_bug.cgi?id=107139
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#108597]: https://bugs.freedesktop.org/show_bug.cgi?id=108597
[fdo#108739]: https://bugs.freedesktop.org/show_bug.cgi?id=108739
[fdo#108833]: https://bugs.freedesktop.org/show_bug.cgi?id=108833
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109294]: https://bugs.freedesktop.org/show_bug.cgi?id=109294
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109485]: https://bugs.freedesktop.org/show_bug.cgi?id=109485
[fdo#109527]: https://bugs.freedesktop.org/show_bug.cgi?id=109527
[fdo#109528]: https://bugs.freedesktop.org/show_bug.cgi?id=109528
[fdo#109530]: https://bugs.freedesktop.org/show_bug.cgi?id=109530
[fdo#109567]: https://bugs.freedesktop.org/show_bug.cgi?id=109567
[fdo#109720]: https://bugs.freedesktop.org/show_bug.cgi?id=109720
Participating hosts (44 -> 39)
------------------------------
Additional (1): fi-icl-y
Missing (6): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-bdw-samus
Build changes
-------------
* IGT: IGT_4849 -> IGTPW_2356
* Linux: CI_DRM_5650 -> Patchwork_12276
CI_DRM_5650: a4c5c4791699aeebfff694c222c76abb61900fca @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2356: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2356/
IGT_4849: e5088c8218d1c2b559a9e1645d34f929d05c3889 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12276: a0223ee5fab54c2b4555203eaddf7ea62b616c33 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
a0223ee5fab5 FOR_TEST_ONLY: i915/Kconfig: Select mei_hdcp by I915 9b65b900cd0d misc/mei/hdcp: Component framework for I915 Interface 825905dcdbc0 misc/mei/hdcp: Closing wired HDCP2.2 Tx Session feb33c82eea3 misc/mei/hdcp: Enabling the HDCP authentication f5b5097eb8c9 misc/mei/hdcp: Verify M_prime83d08f79c09a misc/mei/hdcp: Repeater topology verification and ack 529557441fa3 misc/mei/hdcp: Prepare Session Key a634f8765faf misc/mei/hdcp: Verify L_primea7863139ce44 misc/mei/hdcp: Initiate Locality check b5baa6c83cb8 misc/mei/hdcp: Store the HDCP Pairing info 9b84979b1d91 misc/mei/hdcp: Verify H_primeff2553c3a6f5 misc/mei/hdcp: Verify Receiver Cert and prepare km af983c28bf34 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session 8273d681e1f3 misc/mei/hdcp: Define ME FW interface for HDCP2.2 f34e15960964 misc/mei/hdcp: Client driver for HDCP application 37c5e6646c75 mei: bus: whitelist hdcp client
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12276/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tomas,
Could you please help to review and give final "Go" for the series?
Thanks
--Ram.
Quoted 55 lines · Ramalingam C
This series enables the HDCP2.2 Type 0 for I915. The sequence for HDCP2.2 authentication and encryption is implemented as a generic flow between HDMI and DP. Encoder specific implementations are moved into
hdcp_shim.Intel HWs supports HDCP2.2 through ME FW. Hence this series introduces a client driver for mei bus, so that for HDCP2.2 authentication, HDCP2.2 stack in I915 can avail the services from ME FW. To enable this client driver set the config variable
CONFIG_INTEL_MEI_HDCP.Userspace interface remains unchanged as version agnostic. When userspace request for HDCP enable, Kernel will detect the HDCP source and sink's HDCP version(1.4/2.2)capability and enable the best capable version for that combination.
This series enables the HDCP2.2 for Type0 content streams.
Test-with: <[email protected]> So that CP will be tested on BAT machine too.
Major changes in v15
- All I915 patches are merged. So dropping them.
- Few minor suggestions are incorporated at mei changes.To ease the review process, series is hosted at
https://github.com/ramalingampc2008/drm-tip.githdcp2_2_v15Ramalingam C (15):
misc/mei/hdcp: Client driver for HDCP application misc/mei/hdcp: Define ME FW interface for HDCP2.2 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session misc/mei/hdcp: Verify Receiver Cert and prepare km misc/mei/hdcp: VerifyH_prime
misc/mei/hdcp: Store the HDCP Pairing info misc/mei/hdcp: Initiate Locality check misc/mei/hdcp: VerifyL_prime
misc/mei/hdcp: Prepare Session Key misc/mei/hdcp: Repeater topology verification and ack misc/mei/hdcp: VerifyM_prime
misc/mei/hdcp: Enabling the HDCP authentication misc/mei/hdcp: Closing wired HDCP2.2 Tx Session misc/mei/hdcp: Component framework for I915 Interface
FOR_TEST_ONLY: i915/Kconfig: Selectmei_hdcpby I915Tomas Winkler (1):
mei: bus: whitelist hdcp clientdrivers/misc/mei/Kconfig | 11 + drivers/misc/mei/Makefile | 2 + drivers/misc/mei/bus-fixup.c | 16 + drivers/misc/mei/hdcp/Makefile | 7 + drivers/misc/mei/hdcp/mei_hdcp.c | 849 +++++++++++++++++++++++++++++++++++++++ drivers/misc/mei/hdcp/mei_hdcp.h | 377 +++++++++++++++++ 6 files changed, 1262 insertions(+)
Quoted 4 lines
create mode 100644
drivers/misc/mei/hdcp/Makefilecreate mode 100644drivers/misc/mei/hdcp/mei_hdcp.ccreate mode 100644drivers/misc/mei/hdcp/mei_hdcp.h
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Have you fixed the lkp issue?
I didn't see you pushed the code to github.
Thanks
Quoted 63 lines
-----Original Message-----
From: C, Ramalingam
Sent: Sunday, February 24, 2019 18:33
To: [email protected]; [email protected]; [email protected]; Winkler, Tomas <[email protected]>; Shankar, Uma <[email protected]>
Subject: Re: [PATCH v15 00/16] drm/i915: Implement HDCP2.2Tomas,
Could you please help to review and give final "Go" for the series?
Thanks
--Ram.Quoted 47 lines · Ramalingam C
This series enables the HDCP2.2 Type 0 for I915. The sequence for HDCP2.2 authentication and encryption is implemented as a generic flow between HDMI and DP. Encoder specific implementations are moved into
hdcp_shim.Intel HWs supports HDCP2.2 through ME FW. Hence this series introduces a client driver for mei bus, so that for HDCP2.2 authentication, HDCP2.2 stack in I915 can avail the services from ME FW. To enable this client driver set the config variable
CONFIG_INTEL_MEI_HDCP.Userspace interface remains unchanged as version agnostic. When userspace request for HDCP enable, Kernel will detect the HDCP source and sink's HDCP version(1.4/2.2)capability and enable the best capable version for that combination.
This series enables the HDCP2.2 for Type0 content streams.
Test-with: <[email protected]> So that CP will be tested on BAT machine too.
Major changes in v15
- All I915 patches are merged. So dropping them.
- Few minor suggestions are incorporated at mei changes.To ease the review process, series is hosted at
https://github.com/ramalingampc2008/drm-tip.githdcp2_2_v15Ramalingam C (15):
misc/mei/hdcp: Client driver for HDCP application misc/mei/hdcp: Define ME FW interface for HDCP2.2 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session misc/mei/hdcp: Verify Receiver Cert and prepare km misc/mei/hdcp: VerifyH_prime
misc/mei/hdcp: Store the HDCP Pairing info misc/mei/hdcp: Initiate Locality check misc/mei/hdcp: VerifyL_prime
misc/mei/hdcp: Prepare Session Key misc/mei/hdcp: Repeater topology verification and ack misc/mei/hdcp: VerifyM_prime
misc/mei/hdcp: Enabling the HDCP authentication misc/mei/hdcp: Closing wired HDCP2.2 Tx Session misc/mei/hdcp: Component framework for I915 Interface
FOR_TEST_ONLY: i915/Kconfig: Selectmei_hdcpby I915Tomas Winkler (1):
mei: bus: whitelist hdcp client
Quoted 12 lines
Quoted 5 lines
drivers/misc/mei/Kconfig | 11 + drivers/misc/mei/Makefile | 2 + drivers/misc/mei/bus-fixup.c | 16 + drivers/misc/mei/hdcp/Makefile | 7 + drivers/misc/mei/hdcp/mei_hdcp.c | 849+++++++++++++++++++++++++++++++++++++++
Quoted 6 lines
drivers/misc/mei/hdcp/mei_hdcp.h | 377 +++++++++++++++++ 6 files changed, 1262 insertions(+)create mode 100644
drivers/misc/mei/hdcp/Makefilecreate mode 100644drivers/misc/mei/hdcp/mei_hdcp.ccreate mode 100644drivers/misc/mei/hdcp/mei_hdcp.h
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tomas,
Lkp issue is complaining about the header drm/i915_mei_hdcp_interface.h, Which is already merged in drm-tip through below commit. So don’t think this is a genuine issue. May be this build was tried in different tree, where this commit is not added yet?
commit 1626eab70ebc61d015e69a4bc3479d9228539343
Author: Ramalingam C <[email protected]> Date: Fri Feb 15 14:04:58 2019 +0530
drm/i915: header for i915 - MEI_HDCP interface
v15 is now part of github.
Best Regards,
Ramalingam C
Quoted 8 lines
-----Original Message-----
From: Winkler, Tomas
Sent: Monday, February 25, 2019 1:45 AM
To: C, Ramalingam <[email protected]>; [email protected]; [email protected]; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [PATCH v15 00/16] drm/i915: Implement HDCP2.2
Quoted 82 lines
Have you fixed the lkp issue?
I didn't see you pushed the code to github.
ThanksQuoted 77 lines
-----Original Message-----
From: C, Ramalingam
Sent: Sunday, February 24, 2019 18:33
To: [email protected]; [email protected]; [email protected]; Winkler, Tomas <[email protected]>; Shankar, Uma <[email protected]>
Subject: Re: [PATCH v15 00/16] drm/i915: Implement HDCP2.2Tomas,
Could you please help to review and give final "Go" for the series?
Thanks
--Ram.Quoted 46 lines · Ramalingam C
This series enables the HDCP2.2 Type 0 for I915. The sequence for HDCP2.2 authentication and encryption is implemented as a generic flow between HDMI and DP. Encoder specific implementations are moved into
hdcp_shim.Intel HWs supports HDCP2.2 through ME FW. Hence this series introduces a client driver for mei bus, so that for HDCP2.2 authentication,
HDCP2.2 stack in I915 can avail the services from ME FW. To enable this client driver set the config variableCONFIG_INTEL_MEI_HDCP.Userspace interface remains unchanged as version agnostic. When userspace request for HDCP enable, Kernel will detect the HDCP source and sink's HDCP version(1.4/2.2)capability and enable the best capable version for that combination.
This series enables the HDCP2.2 for Type0 content streams.
Test-with:
<[email protected]> So that CP will be tested on BAT machine too.Major changes in v15
- All I915 patches are merged. So dropping them.
- Few minor suggestions are incorporated at mei changes.To ease the review process, series is hosted at
https://github.com/ramalingampc2008/drm-tip.githdcp2_2_v15Ramalingam C (15):
misc/mei/hdcp: Client driver for HDCP application misc/mei/hdcp: Define ME FW interface for HDCP2.2 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session misc/mei/hdcp: Verify Receiver Cert and prepare km misc/mei/hdcp: VerifyH_prime
misc/mei/hdcp: Store the HDCP Pairing info misc/mei/hdcp: Initiate Locality check misc/mei/hdcp: VerifyL_prime
misc/mei/hdcp: Prepare Session Key misc/mei/hdcp: Repeater topology verification and ack misc/mei/hdcp: VerifyM_prime
misc/mei/hdcp: Enabling the HDCP authentication misc/mei/hdcp: Closing wired HDCP2.2 Tx Session misc/mei/hdcp: Component framework for I915 Interface
FOR_TEST_ONLY: i915/Kconfig: Selectmei_hdcpby I915Quoted 8 lines
Tomas Winkler (1):
mei: bus: whitelist hdcp clientdrivers/misc/mei/Kconfig | 11 + drivers/misc/mei/Makefile | 2 + drivers/misc/mei/bus-fixup.c | 16 + drivers/misc/mei/hdcp/Makefile | 7 + drivers/misc/mei/hdcp/mei_hdcp.c | 849+++++++++++++++++++++++++++++++++++++++
Quoted 6 lines
drivers/misc/mei/hdcp/mei_hdcp.h | 377 +++++++++++++++++ 6 files changed, 1262 insertions(+)create mode 100644
drivers/misc/mei/hdcp/Makefilecreate mode 100644drivers/misc/mei/hdcp/mei_hdcp.ccreate mode 100644drivers/misc/mei/hdcp/mei_hdcp.h
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 6 lines · Ramalingam
Tomas,
Lkp issue is complaining about the header
drm/i915_mei_hdcp_interface.h, Which is already merged in drm-tip through below commit. So don’t think this is a genuine issue. May be this build was tried in different tree, where this commit is not added yet?
Yeah our topic trees aren't pushed into linux-next, 0day can't find them. Usually it will then fail to apply (and in that case it doesn't complain), but it does complain if everything applies but doesn't build. -Daniel
Quoted 104 lines
commit
1626eab70ebc61d015e69a4bc3479d9228539343Author: Ramalingam C <[email protected]> Date: Fri Feb 15 14:04:58 2019 +0530drm/i915: header for i915 -
MEI_HDCPinterfacev15 is now part of github.
Best Regards,
Ramalingam CQuoted 90 lines
-----Original Message-----
From: Winkler, Tomas
Sent: Monday, February 25, 2019 1:45 AM
To: C, Ramalingam <[email protected]>; [email protected]; [email protected]; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [PATCH v15 00/16] drm/i915: Implement HDCP2.2Have you fixed the lkp issue?
I didn't see you pushed the code to github.
ThanksQuoted 77 lines
-----Original Message-----
From: C, Ramalingam
Sent: Sunday, February 24, 2019 18:33
To: [email protected]; [email protected]; [email protected]; Winkler, Tomas <[email protected]>; Shankar, Uma <[email protected]>
Subject: Re: [PATCH v15 00/16] drm/i915: Implement HDCP2.2Tomas,
Could you please help to review and give final "Go" for the series?
Thanks
--Ram.Quoted 46 lines · Ramalingam C
This series enables the HDCP2.2 Type 0 for I915. The sequence for HDCP2.2 authentication and encryption is implemented as a generic flow between HDMI and DP. Encoder specific implementations are moved into
hdcp_shim.Intel HWs supports HDCP2.2 through ME FW. Hence this series introduces a client driver for mei bus, so that for HDCP2.2 authentication,
HDCP2.2 stack in I915 can avail the services from ME FW. To enable this client driver set the config variableCONFIG_INTEL_MEI_HDCP.Userspace interface remains unchanged as version agnostic. When userspace request for HDCP enable, Kernel will detect the HDCP source and sink's HDCP version(1.4/2.2)capability and enable the best capable version for that combination.
This series enables the HDCP2.2 for Type0 content streams.
Test-with:
<[email protected]> So that CP will be tested on BAT machine too.Major changes in v15
- All I915 patches are merged. So dropping them.
- Few minor suggestions are incorporated at mei changes.To ease the review process, series is hosted at
https://github.com/ramalingampc2008/drm-tip.githdcp2_2_v15Ramalingam C (15):
misc/mei/hdcp: Client driver for HDCP application misc/mei/hdcp: Define ME FW interface for HDCP2.2 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session misc/mei/hdcp: Verify Receiver Cert and prepare km misc/mei/hdcp: VerifyH_prime
misc/mei/hdcp: Store the HDCP Pairing info misc/mei/hdcp: Initiate Locality check misc/mei/hdcp: VerifyL_prime
misc/mei/hdcp: Prepare Session Key misc/mei/hdcp: Repeater topology verification and ack misc/mei/hdcp: VerifyM_prime
misc/mei/hdcp: Enabling the HDCP authentication misc/mei/hdcp: Closing wired HDCP2.2 Tx Session misc/mei/hdcp: Component framework for I915 Interface
FOR_TEST_ONLY: i915/Kconfig: Selectmei_hdcpby I915Quoted 8 lines
Tomas Winkler (1):
mei: bus: whitelist hdcp clientdrivers/misc/mei/Kconfig | 11 + drivers/misc/mei/Makefile | 2 + drivers/misc/mei/bus-fixup.c | 16 + drivers/misc/mei/hdcp/Makefile | 7 + drivers/misc/mei/hdcp/mei_hdcp.c | 849+++++++++++++++++++++++++++++++++++++++
Quoted 6 lines
drivers/misc/mei/hdcp/mei_hdcp.h | 377 +++++++++++++++++ 6 files changed, 1262 insertions(+)create mode 100644
drivers/misc/mei/hdcp/Makefilecreate mode 100644drivers/misc/mei/hdcp/mei_hdcp.ccreate mode 100644drivers/misc/mei/hdcp/mei_hdcp.h
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 8 lines · Ramalingam
Quoted 6 lines
Tomas,
Lkp issue is complaining about the header
drm/i915_mei_hdcp_interface.h, Which is already merged in drm-tip through below commit. So don’t think this is a genuine issue. May be this build was tried in different tree, where this commit is not added yet?
Quoted 13 lines
Yeah our topic trees aren't pushed into linux-next, 0day can't find them. Usually it will then fail to apply (and in that case it doesn't complain), but it does complain if everything applies but doesn't build.
-DanielQuoted 8 lines
commit
1626eab70ebc61d015e69a4bc3479d9228539343Author: Ramalingam C <[email protected]> Date: Fri Feb 15 14:04:58 2019 +0530drm/i915: header for i915 -
MEI_HDCPinterfacev15 is now part of github.
I'm okay to go with this.
Thanks
Tomas
Quoted 100 lines
Quoted 46 lines
Best Regards,
Ramalingam CQuoted 41 lines
-----Original Message-----
From: Winkler, Tomas
Sent: Monday, February 25, 2019 1:45 AM
To: C, Ramalingam <[email protected]>; [email protected]; [email protected]; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [PATCH v15 00/16] drm/i915: Implement HDCP2.2Have you fixed the lkp issue?
I didn't see you pushed the code to github.
ThanksQuoted 28 lines
-----Original Message-----
From: C, Ramalingam
Sent: Sunday, February 24, 2019 18:33
To: [email protected]; [email protected]; [email protected]; Winkler, Tomas <[email protected]>; Shankar, Uma <[email protected]>
Subject: Re: [PATCH v15 00/16] drm/i915: Implement HDCP2.2Tomas,
Could you please help to review and give final "Go" for the series?
Thanks
--Ram.Quoted 11 lines · Ramalingam C
This series enables the HDCP2.2 Type 0 for I915. The sequence for
HDCP2.2 authentication and encryption is implemented as a generic flow between HDMI and DP. Encoder specific implementations are moved intohdcp_shim.Intel HWs supports HDCP2.2 through ME FW. Hence this series introduces a client driver for mei bus, so that for HDCP2.2 authentication,
HDCP2.2 stack in I915 can avail the services from ME FW. To enable this client driver set the config variable
CONFIG_INTEL_MEI_HDCP.Quoted 44 lines
Quoted 44 lines
Quoted 44 lines
Quoted 44 lines
Userspace interface remains unchanged as version agnostic. When userspace request for HDCP enable, Kernel will detect the HDCP source and sink's HDCP version(1.4/2.2)capability and enable the best capable version for that combination.
This series enables the HDCP2.2 for Type0 content streams.
Test-with:
<[email protected]> So that CP will be tested on BAT machine too.Major changes in v15
- All I915 patches are merged. So dropping them.
- Few minor suggestions are incorporated at mei changes.To ease the review process, series is hosted at
https://github.com/ramalingampc2008/drm-tip.githdcp2_2_v15Ramalingam C (15):
misc/mei/hdcp: Client driver for HDCP application misc/mei/hdcp: Define ME FW interface for HDCP2.2 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session misc/mei/hdcp: Verify Receiver Cert and prepare km misc/mei/hdcp: VerifyH_prime
misc/mei/hdcp: Store the HDCP Pairing info misc/mei/hdcp: Initiate Locality check misc/mei/hdcp: VerifyL_prime
misc/mei/hdcp: Prepare Session Key misc/mei/hdcp: Repeater topology verification and ack misc/mei/hdcp: VerifyM_prime
misc/mei/hdcp: Enabling the HDCP authentication misc/mei/hdcp: Closing wired HDCP2.2 Tx Session misc/mei/hdcp: Component framework for I915 Interface
FOR_TEST_ONLY: i915/Kconfig: Selectmei_hdcpby I915Tomas Winkler (1):
mei: bus: whitelist hdcp clientdrivers/misc/mei/Kconfig | 11 + drivers/misc/mei/Makefile | 2 + drivers/misc/mei/bus-fixup.c | 16 + drivers/misc/mei/hdcp/Makefile | 7 + drivers/misc/mei/hdcp/mei_hdcp.c | 849Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
+++++++++++++++++++++++++++++++++++++++
Quoted 6 lines
drivers/misc/mei/hdcp/mei_hdcp.h | 377 +++++++++++++++++ 6 files changed, 1262 insertions(+)create mode 100644
drivers/misc/mei/hdcp/Makefilecreate mode 100644drivers/misc/mei/hdcp/mei_hdcp.ccreate mode 100644drivers/misc/mei/hdcp/mei_hdcp.h
Quoted 4 lines
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 18 lines · Tomas
Quoted 18 lines · Ramalingam
Quoted 6 lines
Tomas,
Lkp issue is complaining about the header
drm/i915_mei_hdcp_interface.h, Which is already merged in drm-tip through below commit. So don’t think this is a genuine issue. May be this build was tried in different tree, where this commit is not added yet?Yeah our topic trees aren't pushed into linux-next, 0day can't find them. Usually it will then fail to apply (and in that case it doesn't complain), but it does complain if everything applies but doesn't build.
-DanielQuoted 5 lines
commit
1626eab70ebc61d015e69a4bc3479d9228539343Author: Ramalingam C <[email protected]> Date: Fri Feb 15 14:04:58 2019 +0530
Quoted 5 lines
Quoted 3 lines
Quoted 3 lines
drm/i915: header for i915 -
MEI_HDCPinterfacev15 is now part of github.
I'm okay to go with this.
Ok, merged all the 15 patches into a topic branch. Assuming nothing goes wrong I'll send a pull to Greg tomorrow. And then it's up to him to take it for 5.1 or delay for 5.2.
Thanks a lot for patches&review.
-Daniel
Quoted 107 lines
Thanks
TomasQuoted 104 lines
Quoted 46 lines
Best Regards,
Ramalingam CQuoted 41 lines
-----Original Message-----
From: Winkler, Tomas
Sent: Monday, February 25, 2019 1:45 AM
To: C, Ramalingam <[email protected]>; [email protected]; [email protected]; [email protected]; Shankar, Uma <[email protected]>
Subject: RE: [PATCH v15 00/16] drm/i915: Implement HDCP2.2Have you fixed the lkp issue?
I didn't see you pushed the code to github.
ThanksQuoted 28 lines
-----Original Message-----
From: C, Ramalingam
Sent: Sunday, February 24, 2019 18:33
To: [email protected]; [email protected]; [email protected]; Winkler, Tomas <[email protected]>; Shankar, Uma <[email protected]>
Subject: Re: [PATCH v15 00/16] drm/i915: Implement HDCP2.2Tomas,
Could you please help to review and give final "Go" for the series?
Thanks
--Ram.Quoted 11 lines · Ramalingam C
This series enables the HDCP2.2 Type 0 for I915. The sequence for
HDCP2.2 authentication and encryption is implemented as a generic flow between HDMI and DP. Encoder specific implementations are moved intohdcp_shim.Intel HWs supports HDCP2.2 through ME FW. Hence this series introduces a client driver for mei bus, so that for HDCP2.2 authentication,
HDCP2.2 stack in I915 can avail the services from ME FW. To enable this client driver set the config variable
CONFIG_INTEL_MEI_HDCP.Quoted 44 lines
Quoted 44 lines
Quoted 44 lines
Quoted 44 lines
Userspace interface remains unchanged as version agnostic. When userspace request for HDCP enable, Kernel will detect the HDCP source and sink's HDCP version(1.4/2.2)capability and enable the best capable version for that combination.
This series enables the HDCP2.2 for Type0 content streams.
Test-with:
<[email protected]> So that CP will be tested on BAT machine too.Major changes in v15
- All I915 patches are merged. So dropping them.
- Few minor suggestions are incorporated at mei changes.To ease the review process, series is hosted at
https://github.com/ramalingampc2008/drm-tip.githdcp2_2_v15Ramalingam C (15):
misc/mei/hdcp: Client driver for HDCP application misc/mei/hdcp: Define ME FW interface for HDCP2.2 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session misc/mei/hdcp: Verify Receiver Cert and prepare km misc/mei/hdcp: VerifyH_prime
misc/mei/hdcp: Store the HDCP Pairing info misc/mei/hdcp: Initiate Locality check misc/mei/hdcp: VerifyL_prime
misc/mei/hdcp: Prepare Session Key misc/mei/hdcp: Repeater topology verification and ack misc/mei/hdcp: VerifyM_prime
misc/mei/hdcp: Enabling the HDCP authentication misc/mei/hdcp: Closing wired HDCP2.2 Tx Session misc/mei/hdcp: Component framework for I915 Interface
FOR_TEST_ONLY: i915/Kconfig: Selectmei_hdcpby I915Tomas Winkler (1):
mei: bus: whitelist hdcp clientdrivers/misc/mei/Kconfig | 11 + drivers/misc/mei/Makefile | 2 + drivers/misc/mei/bus-fixup.c | 16 + drivers/misc/mei/hdcp/Makefile | 7 + drivers/misc/mei/hdcp/mei_hdcp.c | 849Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
+++++++++++++++++++++++++++++++++++++++
Quoted 6 lines
drivers/misc/mei/hdcp/mei_hdcp.h | 377 +++++++++++++++++ 6 files changed, 1262 insertions(+)create mode 100644
drivers/misc/mei/hdcp/Makefilecreate mode 100644drivers/misc/mei/hdcp/mei_hdcp.ccreate mode 100644drivers/misc/mei/hdcp/mei_hdcp.h--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for drm/i915: Implement HDCP2.2 (rev2)
In reply to Ramalingam C== Series Details ==
== Series Details ==
Series: drm/i915: Implement HDCP2.2 (rev2)
URL : https://patchwork.freedesktop.org/series/57037/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 28035a8723cc mei: bus: whitelist hdcp client 5eb2c31723c1 misc/mei/hdcp: Client driver for HDCP application -:82: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating? #82: new file mode 100644
total: 0 errors, 1 warnings, 0 checks, 89 lines checked09a2be93b7a0 misc/mei/hdcp: Define ME FW interface for HDCP2.2
-:32: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating? #32:
new file mode 100644
total: 0 errors, 1 warnings, 0 checks, 366 lines checked 3484221901e4 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session 750814ae1aa9 misc/mei/hdcp: Verify Receiver Cert and prepare km 334946798e8f misc/mei/hdcp: Verify H_prime1c21f1b7045b misc/mei/hdcp: Store the HDCP Pairing info 0d73f8dd8237 misc/mei/hdcp: Initiate Locality check 0be9f3d963dd misc/mei/hdcp: Verify L_primee5cf396eb147 misc/mei/hdcp: Prepare Session Key a1d45c3a48b6 misc/mei/hdcp: Repeater topology verification and ack 879ebb26ac20 misc/mei/hdcp: Verify M_prime444c2c7be0b1 misc/mei/hdcp: Enabling the HDCP authentication b9cb735b3ebd misc/mei/hdcp: Closing wired HDCP2.2 Tx Session 98e90808d3b7 misc/mei/hdcp: Component framework for I915 Interface 576dc9dbdfeb FOR_TEST_ONLY: i915/Kconfig: Select mei_hdcp by I915
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.SPARSE: warning for drm/i915: Implement HDCP2.2 (rev2)
In reply to Ramalingam C== Series Details ==
== Series Details ==
Series: drm/i915: Implement HDCP2.2 (rev2)
URL : https://patchwork.freedesktop.org/series/57037/
State : warning
== Summary ==
$ dim sparse origin/drm-tip Sparse version: v0.5.2 Commit: mei: bus: whitelist hdcp client Okay!
Commit: misc/mei/hdcp: Client driver for HDCP application +Error in reading or end of file.
Commit: misc/mei/hdcp: Define ME FW interface for HDCP2.2 Okay!
Commit: misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session Okay!
Commit: misc/mei/hdcp: Verify Receiver Cert and prepare km Okay!
Commit: misc/mei/hdcp: Verify H_prime
Okay!
Commit: misc/mei/hdcp: Store the HDCP Pairing info Okay!
Commit: misc/mei/hdcp: Initiate Locality check
Okay!
Commit: misc/mei/hdcp: Verify L_prime
Okay!
Commit: misc/mei/hdcp: Prepare Session Key
Okay!
Commit: misc/mei/hdcp: Repeater topology verification and ack Okay!
Commit: misc/mei/hdcp: Verify M_prime
Okay!
Commit: misc/mei/hdcp: Enabling the HDCP authentication Okay!
Commit: misc/mei/hdcp: Closing wired HDCP2.2 Tx Session Okay!
Commit: misc/mei/hdcp: Component framework for I915 Interface Okay!
Commit: FOR_TEST_ONLY: i915/Kconfig: Select mei_hdcp by I915 Okay!
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: Implement HDCP2.2 (rev2)
In reply to Ramalingam C== Series Details ==
== Series Details ==
Series: drm/i915: Implement HDCP2.2 (rev2)
URL : https://patchwork.freedesktop.org/series/57037/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5657 -> Patchwork_12295
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/57037/revisions/2/mbox/
Known issues
------------
Here are the changes found in Patchwork_12295 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_basic@readonly-bsd2:
- fi-pnv-d510: NOTRUN -> SKIP [fdo#109271] +78
* igt@kms_busy@basic-flip-a:
- fi-apl-guc: PASS -> SKIP [fdo#109271] +5
* igt@kms_busy@basic-flip-b:
- fi-cfl-guc: PASS -> SKIP [fdo#109271] +5
- fi-skl-guc: PASS -> SKIP [fdo#109271] +5
* igt@kms_busy@basic-flip-c:
- fi-byt-j1900: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
- fi-pnv-d510: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_chamelium@hdmi-crc-fast:
- fi-byt-j1900: NOTRUN -> SKIP [fdo#109271] +54
* igt@kms_content_protection@atomic:
- fi-skl-gvtdvm: NOTRUN -> FAIL [fdo#108597] / [fdo#108739] +1
- fi-ivb-3520m: NOTRUN -> SKIP [fdo#109271] +4
- fi-whl-u: NOTRUN -> SKIP [fdo#109271] +1
- fi-icl-u2: NOTRUN -> FAIL [fdo#108597] / [fdo#108739] +1
- fi-bdw-5557u: NOTRUN -> SKIP [fdo#109271] +1
- fi-hsw-peppy: NOTRUN -> SKIP [fdo#109271] +1
- fi-hsw-4770r: NOTRUN -> SKIP [fdo#109271] +1
- fi-byt-n2820: NOTRUN -> SKIP [fdo#109271] +2
- fi-kbl-7560u: NOTRUN -> SKIP [fdo#109271] +1
- fi-skl-6600u: NOTRUN -> SKIP [fdo#109271] +1
- fi-apl-guc: NOTRUN -> FAIL [fdo#108597] / [fdo#108739] +1* igt@kms_content_protection@legacy:
- fi-cfl-guc: NOTRUN -> SKIP [fdo#109271] +2
- fi-bsw-kefka: NOTRUN -> SKIP [fdo#109271] +1
- fi-bxt-j4205: NOTRUN -> SKIP [fdo#109271] +2
- fi-kbl-r: NOTRUN -> SKIP [fdo#109271] +1
- fi-cfl-8109u: NOTRUN -> FAIL [fdo#108739] +1
- fi-kbl-guc: NOTRUN -> SKIP [fdo#109271] +5
- fi-gdg-551: NOTRUN -> SKIP [fdo#109271] +6
- fi-hsw-4770: NOTRUN -> SKIP [fdo#109271] +2
- fi-bsw-n3050: NOTRUN -> SKIP [fdo#109271] +2* igt@pm_backlight@basic-brightness:
- fi-bdw-5557u: NOTRUN -> SKIP [fdo#109271] / [fdo#109527]
- fi-kbl-7567u: NOTRUN -> SKIP [fdo#109271]
- fi-skl-guc: NOTRUN -> SKIP [fdo#109271] +2
- fi-cfl-8109u: NOTRUN -> SKIP [fdo#109271]
- fi-cfl-8700k: NOTRUN -> SKIP [fdo#109271] +2
- fi-ilk-650: NOTRUN -> SKIP [fdo#109271] / [fdo#109527]
- fi-elk-e7500: NOTRUN -> SKIP [fdo#109271] / [fdo#109527]
- fi-kbl-x1275: NOTRUN -> SKIP [fdo#109271]
- fi-kbl-7500u: NOTRUN -> SKIP [fdo#109271] / [fdo#109527]
- fi-apl-guc: NOTRUN -> SKIP [fdo#109271]
- fi-skl-6260u: NOTRUN -> SKIP [fdo#109271]
- fi-hsw-4770r: NOTRUN -> SKIP [fdo#109271] / [fdo#109527]
- fi-skl-6700k2: NOTRUN -> SKIP [fdo#109271] * igt@pm_rpm@basic-pci-d3-state:
- fi-kbl-8809g: NOTRUN -> SKIP [fdo#109271] +4
* igt@pm_rpm@basic-rte:
- fi-skl-gvtdvm: NOTRUN -> SKIP [fdo#109271] +3
- fi-elk-e7500: NOTRUN -> SKIP [fdo#109271] +5
- fi-ilk-650: NOTRUN -> SKIP [fdo#109271] +5
- fi-bdw-gvtdvm: NOTRUN -> SKIP [fdo#109271] +5
- fi-snb-2520m: NOTRUN -> SKIP [fdo#109271] +4 * igt@pm_rpm@module-reload:
- fi-ivb-3770: NOTRUN -> SKIP [fdo#109271] +5
* igt@pm_rps@basic-api:
- fi-bwr-2160: NOTRUN -> SKIP [fdo#109271] +6
* igt@prime_vgem@basic-wait-default:
- fi-kbl-guc: PASS -> SKIP [fdo#109271] +12
#### Possible fixes ####
* igt@i915_hangman@error-state-basic:
- fi-kbl-guc: SKIP [fdo#109271] -> PASS
- fi-apl-guc: SKIP [fdo#109271] -> PASS
- fi-skl-guc: SKIP [fdo#109271] -> PASS
- fi-cfl-guc: SKIP [fdo#109271] -> PASS * igt@kms_chamelium@common-hpd-after-suspend:
- fi-kbl-7567u: WARN [fdo#109380] -> PASS
* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: FAIL [fdo#109485] -> PASS
* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-c:
- fi-kbl-7567u: SKIP [fdo#109271] -> PASS +31
* igt@prime_vgem@basic-fence-flip:
- fi-kbl-7500u: SKIP [fdo#109271] -> PASS +31
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#108597]: https://bugs.freedesktop.org/show_bug.cgi?id=108597
[fdo#108739]: https://bugs.freedesktop.org/show_bug.cgi?id=108739
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109380]: https://bugs.freedesktop.org/show_bug.cgi?id=109380
[fdo#109485]: https://bugs.freedesktop.org/show_bug.cgi?id=109485
[fdo#109527]: https://bugs.freedesktop.org/show_bug.cgi?id=109527
[fdo#109567]: https://bugs.freedesktop.org/show_bug.cgi?id=109567
Participating hosts (40 -> 39)
------------------------------
Additional (2): fi-byt-j1900 fi-pnv-d510
Missing (3): fi-ilk-m540 fi-byt-squawks fi-bsw-cyan
Build changes
-------------
* IGT: IGT_4853 -> IGTPW_2356
* Linux: CI_DRM_5657 -> Patchwork_12295
CI_DRM_5657: 3dd976663b985375368c6229903a1c47971c2a71 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2356: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2356/
IGT_4853: 8afdfd8fa9ce17043d9105dedca46ad4555fdcdb @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12295: 576dc9dbdfebb3241600def7f9078c8f7abbff2c @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
576dc9dbdfeb FOR_TEST_ONLY: i915/Kconfig: Select mei_hdcp by I915 98e90808d3b7 misc/mei/hdcp: Component framework for I915 Interface b9cb735b3ebd misc/mei/hdcp: Closing wired HDCP2.2 Tx Session 444c2c7be0b1 misc/mei/hdcp: Enabling the HDCP authentication 879ebb26ac20 misc/mei/hdcp: Verify M_primea1d45c3a48b6 misc/mei/hdcp: Repeater topology verification and ack e5cf396eb147 misc/mei/hdcp: Prepare Session Key 0be9f3d963dd misc/mei/hdcp: Verify L_prime0d73f8dd8237 misc/mei/hdcp: Initiate Locality check 1c21f1b7045b misc/mei/hdcp: Store the HDCP Pairing info 334946798e8f misc/mei/hdcp: Verify H_prime750814ae1aa9 misc/mei/hdcp: Verify Receiver Cert and prepare km 3484221901e4 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session 09a2be93b7a0 misc/mei/hdcp: Define ME FW interface for HDCP2.2 5eb2c31723c1 misc/mei/hdcp: Client driver for HDCP application 28035a8723cc mei: bus: whitelist hdcp client
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12295/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915: Implement HDCP2.2 (rev2)
In reply to Ramalingam C== Series Details ==
== Series Details ==
Series: drm/i915: Implement HDCP2.2 (rev2)
URL : https://patchwork.freedesktop.org/series/57037/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5657_full -> Patchwork_12295_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Known issues
------------
Here are the changes found in Patchwork_12295_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_busy@busy-bsd2:
- shard-iclb: NOTRUN -> SKIP [fdo#109276] +7
* igt@gem_busy@extended-semaphore-bsd1:
- shard-iclb: NOTRUN -> SKIP [fdo#109275] / [fdo#109276]
* igt@gem_ctx_isolation@vecs0-clean:
- shard-iclb: NOTRUN -> SKIP [fdo#109281]
* igt@gem_pwrite@stolen-normal:
- shard-iclb: NOTRUN -> SKIP [fdo#109277] +1
* igt@i915_query@query-topology-unsupported:
- shard-apl: NOTRUN -> SKIP [fdo#109271] +66
* igt@i915_suspend@shrink:
- shard-apl: NOTRUN -> DMESG-WARN [fdo#107886] / [fdo#109244]
- shard-kbl: NOTRUN -> DMESG-WARN [fdo#109244]
- shard-snb: NOTRUN -> DMESG-WARN [fdo#109244]
- shard-hsw: NOTRUN -> DMESG-WARN [fdo#109244]
- shard-iclb: NOTRUN -> DMESG-WARN [fdo#107886] / [fdo#109244]
- shard-glk: NOTRUN -> DMESG-WARN [fdo#109244] * igt@kms_atomic_transition@3x-modeset-transitions-fencing:
- shard-apl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +2
* igt@kms_atomic_transition@3x-modeset-transitions-nonblocking:
- shard-iclb: NOTRUN -> SKIP [fdo#109278] +1
* igt@kms_busy@basic-modeset-d:
- shard-glk: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_busy@extended-modeset-hang-newfb-render-e:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-b:
- shard-iclb: NOTRUN -> DMESG-WARN [fdo#107956] +1
* igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
- shard-apl: PASS -> FAIL [fdo#106510] / [fdo#108145] +1
* igt@kms_chamelium@hdmi-hpd:
- shard-iclb: NOTRUN -> SKIP [fdo#109284]
* igt@kms_cursor_crc@cursor-256x256-dpms:
- shard-kbl: PASS -> FAIL [fdo#103232] +1
* igt@kms_cursor_crc@cursor-512x512-onscreen:
- shard-iclb: NOTRUN -> SKIP [fdo#109279]
* igt@kms_cursor_crc@cursor-64x21-random:
- shard-apl: PASS -> FAIL [fdo#103232] +5
* igt@kms_cursor_crc@cursor-64x64-suspend:
- shard-iclb: NOTRUN -> FAIL [fdo#103232] +1
- shard-apl: PASS -> FAIL [fdo#103191] / [fdo#103232]
* igt@kms_cursor_legacy@2x-long-flip-vs-cursor-legacy:
- shard-iclb: NOTRUN -> SKIP [fdo#109274] +3
* igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic:
- shard-glk: NOTRUN -> FAIL [fdo#105454] / [fdo#106509]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- shard-glk: PASS -> FAIL [fdo#103167] +5
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-wc:
- shard-iclb: NOTRUN -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
- shard-iclb: PASS -> FAIL [fdo#103167] +2
- shard-apl: PASS -> FAIL [fdo#103167] +1
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-cur-indfb-draw-blt:
- shard-iclb: NOTRUN -> SKIP [fdo#109280] +12
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-onoff:
- shard-snb: NOTRUN -> SKIP [fdo#109271] +131
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-spr-indfb-draw-mmap-cpu:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +29
* igt@kms_pipe_crc_basic@read-crc-pipe-b:
- shard-snb: PASS -> INCOMPLETE [fdo#105411]
* igt@kms_plane@pixel-format-pipe-b-planes-source-clamping:
- shard-iclb: NOTRUN -> FAIL [fdo#108948]
* igt@kms_plane_alpha_blend@pipe-b-alpha-transparant-fb:
- shard-apl: NOTRUN -> FAIL [fdo#108145] +1
- shard-snb: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +7
* igt@kms_plane_multiple@atomic-pipe-a-tiling-none:
- shard-glk: NOTRUN -> FAIL [fdo#103166]
* igt@kms_plane_multiple@atomic-pipe-b-tiling-none:
- shard-glk: PASS -> FAIL [fdo#103166] +3
- shard-apl: PASS -> FAIL [fdo#103166] +3
- shard-iclb: NOTRUN -> FAIL [fdo#103166] * igt@kms_plane_multiple@atomic-pipe-b-tiling-x:
- shard-apl: NOTRUN -> FAIL [fdo#103166]
* igt@kms_plane_multiple@atomic-pipe-b-tiling-y:
- shard-iclb: PASS -> FAIL [fdo#103166] +2
* igt@kms_psr@no_drrs:
- shard-iclb: PASS -> FAIL [fdo#108341]
* igt@perf@unprivileged-single-ctx-counters:
- shard-iclb: NOTRUN -> SKIP [fdo#109289] +2
* igt@pm_backlight@fade_with_suspend:
- shard-iclb: NOTRUN -> FAIL [fdo#107847]
* igt@pm_lpsp@edp-native:
- shard-iclb: NOTRUN -> SKIP [fdo#109301] +3
* igt@pm_rpm@gem-execbuf-stress-pc8:
- shard-iclb: NOTRUN -> SKIP [fdo#109506]
* igt@pm_rpm@modeset-lpsp:
- shard-glk: NOTRUN -> SKIP [fdo#109271] +29
* igt@pm_rpm@modeset-non-lpsp-stress-no-wait:
- shard-iclb: NOTRUN -> SKIP [fdo#109308] +4
* igt@pm_rpm@modeset-pc8-residency-stress:
- shard-hsw: NOTRUN -> SKIP [fdo#109271] +16
- shard-iclb: NOTRUN -> SKIP [fdo#109293] +1
* igt@pm_rps@min-max-config-loaded:
- shard-iclb: NOTRUN -> FAIL [fdo#102250]
* igt@pm_rps@reset:
- shard-iclb: NOTRUN -> FAIL [fdo#102250] / [fdo#108059] +1
* igt@pm_rps@waitboost:
- shard-hsw: NOTRUN -> INCOMPLETE [fdo#103540]
* igt@pm_sseu@full-enable:
- shard-iclb: NOTRUN -> SKIP [fdo#109288]
* igt@prime_nv_pcopy@test2:
- shard-iclb: NOTRUN -> SKIP [fdo#109291] +1
#### Possible fixes ####
* igt@i915_suspend@fence-restore-tiled2untiled:
- shard-snb: INCOMPLETE [fdo#105411] -> PASS
* igt@i915_suspend@fence-restore-untiled:
- shard-kbl: INCOMPLETE [fdo#103665] -> PASS
* igt@kms_atomic_transition@plane-all-modeset-transition-fencing:
- shard-apl: INCOMPLETE [fdo#103927] -> PASS
* igt@kms_busy@extended-modeset-hang-newfb-render-a:
- shard-kbl: DMESG-WARN [fdo#107956] -> PASS
* igt@kms_busy@extended-pageflip-hang-newfb-render-a:
- shard-glk: DMESG-WARN [fdo#107956] -> PASS
* igt@kms_ccs@pipe-b-crc-sprite-planes-basic:
- shard-glk: FAIL [fdo#108145] -> PASS
- shard-kbl: FAIL [fdo#107725] / [fdo#108145] -> PASS
* igt@kms_color@pipe-b-ctm-max:
- shard-apl: FAIL [fdo#108147] -> PASS
* igt@kms_color@pipe-b-degamma:
- shard-apl: FAIL [fdo#104782] -> PASS +1
* igt@kms_color@pipe-c-legacy-gamma:
- shard-glk: FAIL [fdo#104782] -> PASS
* igt@kms_cursor_crc@cursor-128x128-suspend:
- shard-apl: FAIL [fdo#103191] / [fdo#103232] -> PASS
* igt@kms_cursor_crc@cursor-256x256-random:
- shard-apl: FAIL [fdo#103232] -> PASS +2
* igt@kms_cursor_crc@cursor-64x64-random:
- shard-kbl: FAIL [fdo#103232] -> PASS
* igt@kms_cursor_crc@cursor-alpha-opaque:
- shard-glk: FAIL [fdo#109350] -> PASS
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
- shard-glk: FAIL [fdo#103167] -> PASS
- shard-apl: FAIL [fdo#103167] -> PASS +1
- shard-kbl: FAIL [fdo#103167] -> PASS +1 * igt@kms_frontbuffer_tracking@psr-1p-primscrn-spr-indfb-draw-pwrite:
- shard-iclb: FAIL [fdo#103167] -> PASS +5
* igt@kms_plane@pixel-format-pipe-b-planes-source-clamping:
- shard-apl: FAIL [fdo#108948] -> PASS
* igt@kms_plane@pixel-format-pipe-c-planes:
- shard-glk: FAIL [fdo#103166] -> PASS +1
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-b-planes:
- shard-iclb: INCOMPLETE [fdo#107713] -> PASS
* igt@kms_plane@plane-position-covered-pipe-a-planes:
- shard-iclb: FAIL [fdo#103166] -> PASS +2
* igt@kms_plane_multiple@atomic-pipe-a-tiling-none:
- shard-kbl: FAIL [fdo#103166] -> PASS
- shard-apl: FAIL [fdo#103166] -> PASS
* igt@kms_rotation_crc@multiplane-rotation-cropping-top:
- shard-kbl: FAIL [fdo#109016] -> PASS
* igt@kms_setmode@basic:
- shard-kbl: FAIL [fdo#99912] -> PASS
* igt@kms_vblank@pipe-a-ts-continuation-dpms-rpm:
- shard-apl: FAIL [fdo#104894] -> PASS
* igt@perf_pmu@rc6:
- shard-kbl: SKIP [fdo#109271] -> PASS
[fdo#102250]: https://bugs.freedesktop.org/show_bug.cgi?id=102250
[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104782]: https://bugs.freedesktop.org/show_bug.cgi?id=104782
[fdo#104894]: https://bugs.freedesktop.org/show_bug.cgi?id=104894
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#105454]: https://bugs.freedesktop.org/show_bug.cgi?id=105454
[fdo#106509]: https://bugs.freedesktop.org/show_bug.cgi?id=106509
[fdo#106510]: https://bugs.freedesktop.org/show_bug.cgi?id=106510
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107725]: https://bugs.freedesktop.org/show_bug.cgi?id=107725
[fdo#107847]: https://bugs.freedesktop.org/show_bug.cgi?id=107847
[fdo#107886]: https://bugs.freedesktop.org/show_bug.cgi?id=107886
[fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
[fdo#108059]: https://bugs.freedesktop.org/show_bug.cgi?id=108059
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#108341]: https://bugs.freedesktop.org/show_bug.cgi?id=108341
[fdo#108948]: https://bugs.freedesktop.org/show_bug.cgi?id=108948
[fdo#109016]: https://bugs.freedesktop.org/show_bug.cgi?id=109016
[fdo#109244]: https://bugs.freedesktop.org/show_bug.cgi?id=109244
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109275]: https://bugs.freedesktop.org/show_bug.cgi?id=109275
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109277]: https://bugs.freedesktop.org/show_bug.cgi?id=109277
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109279]: https://bugs.freedesktop.org/show_bug.cgi?id=109279
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109281]: https://bugs.freedesktop.org/show_bug.cgi?id=109281
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109288]: https://bugs.freedesktop.org/show_bug.cgi?id=109288
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109291]: https://bugs.freedesktop.org/show_bug.cgi?id=109291
[fdo#109293]: https://bugs.freedesktop.org/show_bug.cgi?id=109293
[fdo#109301]: https://bugs.freedesktop.org/show_bug.cgi?id=109301
[fdo#109308]: https://bugs.freedesktop.org/show_bug.cgi?id=109308
[fdo#109350]: https://bugs.freedesktop.org/show_bug.cgi?id=109350
[fdo#109506]: https://bugs.freedesktop.org/show_bug.cgi?id=109506
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (7 -> 6)
------------------------------
Missing (1): shard-skl
Build changes
-------------
* IGT: IGT_4853 -> IGTPW_2356
* Linux: CI_DRM_5657 -> Patchwork_12295
CI_DRM_5657: 3dd976663b985375368c6229903a1c47971c2a71 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2356: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2356/
IGT_4853: 8afdfd8fa9ce17043d9105dedca46ad4555fdcdb @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12295: 576dc9dbdfebb3241600def7f9078c8f7abbff2c @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12295/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx