Skip to contentSkip to conversation

drm/i915: Implement HDCP2.2

PATCH Superseded Ramalingam C 2 participants 43 messages Sep 27, 2018

Subsystems (7)

v7 of 15 Superseded Latest is v15 →

lore
Share & tools
lore
#0 lore raw

v7 cover drm/i915: Implement HDCP2.2

This series enables the HDCP2.2 for I915. The sequence for HDCP2.2 authentication and encryption is implemented as a generic flow between HDMI and DP. Encoder specific implementations are moved into hdcp_shim.

Intel HWs supports HDCP2.2 through ME FW. Hence this series introduces a client driver for mei bus, so that for HDCP2.2 authentication, HDCP2.2 stack in I915 can avail the services from ME FW. To enable this client driver set the config variable CONFIG_INTEL_MEI_HDCP.

Userspace interface remains unchanged as version agnostic. When userspace request for HDCP enable, Kernel will detect the HDCP source and sink's HDCP version(1.4/2.2)capability and enable the best capable version for that combination.

This series enables the HDCP2.2 for Type0 content streams.

Major Changes in v7:
- I915 driver unregister is added to master unbind [Daniel].
- Proposes commiting the content protection req without modeset
- Fixed a regression on DP HDCP2.2. [Ankit]
- Patch for enabling the MEI_HDCP is added for Testing only. [Daniel]
- mei patch series is realigned for bisecting.
- Review comments are addressed.
- Fixed KBL HDCP2.2 encrypt status signalling.

For review convenience v7 of complete series is hosted at

	https://github.com/ramalingampc2008/drm-tip.git hdcp2_2_v7

Ramalingam C (37):
drm: hdcp2.2 authentication msg definitions
drm: HDMI and DP specific HDCP2.2 defines linux/mei: Header for mei_hdcp driver interface drm/i915: wrapping all hdcp var into intel_hdcp drm/i915: Define Intel HDCP2.2 registers
component: alloc component_match without any comp to match drm/i915: component master at i915 driver load drm/i915: Initialize HDCP2.2 and its MEI interface drm/i915: Pullout the bksv read and validation drm/i915: Enable and Disable of HDCP2.2 drm/i915: Implement HDCP2.2 receiver authentication drm/i915: Implement HDCP2.2 repeater authentication drm/i915: Implement HDCP2.2 link integrity check drm/i915: Handle HDCP2.2 downstream topology change drm/i915: hdcp_check_link only on CP_IRQ drm/i915: Check HDCP 1.4 and 2.2 link on CP_IRQ drm/i915: Implement the HDCP2.2 support for DP drm/i915: Implement the HDCP2.2 support for HDMI drm/i915: Add HDCP2.2 support for DP connectors drm/i915: Add HDCP2.2 support for HDMI connectors misc/mei/hdcp: Client driver for HDCP application misc/mei/hdcp: Define ME FW interface for HDCP2.2 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session misc/mei/hdcp: Verify Receiver Cert and prepare km misc/mei/hdcp: Verify H_prime
misc/mei/hdcp: Store the HDCP Pairing info misc/mei/hdcp: Initiate Locality check misc/mei/hdcp: Verify L_prime
misc/mei/hdcp: Prepare Session Key misc/mei/hdcp: Repeater topology verification and ack misc/mei/hdcp: Verify M_prime
misc/mei/hdcp: Enabling the HDCP authentication misc/mei/hdcp: Closing wired HDCP2.2 Tx Session misc/mei/hdcp: Component framework for I915 Interface drm/i915: Commit CP without modeset
drm/i915: Fix KBL HDCP2.2 encrypt status signalling
FOR_TEST: misc/Kconfig: Enabling mei_hdcp by default

Tomas Winkler (2):
mei: bus: whitelist hdcp client
mei: bus: export to_mei_cl_device for mei client device drivers

 drivers/base/component.c             |   30 +
 drivers/gpu/drm/i915/i915_drv.c      |   84 ++-
 drivers/gpu/drm/i915/i915_drv.h      |    3 +
 drivers/gpu/drm/i915/i915_reg.h      |   32 +
 drivers/gpu/drm/i915/intel_ddi.c     |    7 -
 drivers/gpu/drm/i915/intel_display.c |   18 +-
 drivers/gpu/drm/i915/intel_dp.c      |  350 ++++++++-
 drivers/gpu/drm/i915/intel_drv.h     |   97 ++-
 drivers/gpu/drm/i915/intel_hdcp.c    | 1295 ++++++++++++++++++++++++++++++----
 drivers/gpu/drm/i915/intel_hdmi.c    |  193 ++++-
 drivers/misc/mei/Kconfig             |    8 +
 drivers/misc/mei/Makefile            |    2 +
 drivers/misc/mei/bus-fixup.c         |   16 +
 drivers/misc/mei/bus.c               |    1 -
 drivers/misc/mei/hdcp/Makefile       |    7 +
 drivers/misc/mei/hdcp/mei_hdcp.c     |  829 ++++++++++++++++++++++
 drivers/misc/mei/hdcp/mei_hdcp.h     |  366 ++++++++++
 include/drm/drm_dp_helper.h          |   51 ++
 include/drm/drm_hdcp.h               |  235 ++++++
 include/drm/i915_component.h         |   76 ++
 include/linux/component.h            |    2 +
 include/linux/mei_cl_bus.h           |    2 +
 include/linux/mei_hdcp.h             |   76 ++
 23 files changed, 3601 insertions(+), 179 deletions(-)
 create mode 100644 drivers/misc/mei/hdcp/Makefile
 create mode 100644 drivers/misc/mei/hdcp/mei_hdcp.c
 create mode 100644 drivers/misc/mei/hdcp/mei_hdcp.h
 create mode 100644 include/linux/mei_hdcp.h
Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw

PATCH v7 1/39 drm: hdcp2.2 authentication msg definitions

This patch defines the hdcp2.2 protocol messages for authentication.

v2:
bit_fields are removed. Instead bitmasking used. [Tomas and Jani] prefix HDCP_2_2_ is added to the macros. [Tomas]
v3:
No Changes.
v4:
Style and spellings are fixed [Uma]
v5:
Fix for macros.
v6:
comment for Type is improved [Sean Paul]
v7:
%s/HDCP_2_2_LPRIME_HALF_LEN/HDCP_2_2_V_PRIME_HALF_LEN [Uma] %s/uintxx_t/uxx

---
 include/drm/drm_hdcp.h | 184 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 184 insertions(+)
include/drm/drm_hdcp.h +184 -0
index 98e63d870139..dd36c5198c46 100644
@@ -38,4 +38,188 @@
 #define DRM_HDCP_DDC_BSTATUS			0x41
 #define DRM_HDCP_DDC_KSV_FIFO			0x43
 
+#define DRM_HDCP_1_4_SRM_ID			0x8
+#define DRM_HDCP_1_4_VRL_LENGTH_SIZE		3
+#define DRM_HDCP_1_4_DCP_SIG_SIZE		40
+
+/* Protocol message definition for HDCP2.2 specification */
+/*
+ * Protected content streams are classified into 2 types:
+ * - Type0: Can be transmitted with HDCP 1.4+
+ * - Type1: Can be transmitted with HDCP 2.2+
+ */
+#define HDCP_STREAM_TYPE0			0x00
+#define HDCP_STREAM_TYPE1			0x01
+
+/* HDCP2.2 Msg IDs */
+#define HDCP_2_2_NULL_MSG			1
+#define HDCP_2_2_AKE_INIT			2
+#define HDCP_2_2_AKE_SEND_CERT			3
+#define HDCP_2_2_AKE_NO_STORED_KM		4
+#define HDCP_2_2_AKE_STORED_KM			5
+#define HDCP_2_2_AKE_SEND_HPRIME		7
+#define HDCP_2_2_AKE_SEND_PAIRING_INFO		8
+#define HDCP_2_2_LC_INIT			9
+#define HDCP_2_2_LC_SEND_LPRIME			10
+#define HDCP_2_2_SKE_SEND_EKS			11
+#define HDCP_2_2_REP_SEND_RECVID_LIST		12
+#define HDCP_2_2_REP_SEND_ACK			15
+#define HDCP_2_2_REP_STREAM_MANAGE		16
+#define HDCP_2_2_REP_STREAM_READY		17
+#define HDCP_2_2_ERRATA_DP_STREAM_TYPE		50
+
+#define HDCP_2_2_RTX_LEN			8
+#define HDCP_2_2_RRX_LEN			8
+
+#define HDCP_2_2_K_PUB_RX_MOD_N_LEN		128
+#define HDCP_2_2_K_PUB_RX_EXP_E_LEN		3
+#define HDCP_2_2_K_PUB_RX_LEN			(HDCP_2_2_K_PUB_RX_MOD_N_LEN + \
+						 HDCP_2_2_K_PUB_RX_EXP_E_LEN)
+
+#define HDCP_2_2_DCP_LLC_SIG_LEN		384
+
+#define HDCP_2_2_E_KPUB_KM_LEN			128
+#define HDCP_2_2_E_KH_KM_M_LEN			(16 + 16)
+#define HDCP_2_2_H_PRIME_LEN			32
+#define HDCP_2_2_E_KH_KM_LEN			16
+#define HDCP_2_2_RN_LEN				8
+#define HDCP_2_2_L_PRIME_LEN			32
+#define HDCP_2_2_E_DKEY_KS_LEN			16
+#define HDCP_2_2_RIV_LEN			8
+#define HDCP_2_2_SEQ_NUM_LEN			3
+#define HDCP_2_2_V_PRIME_HALF_LEN		(HDCP_2_2_L_PRIME_LEN / 2)
+#define HDCP_2_2_RECEIVER_ID_LEN		DRM_HDCP_KSV_LEN
+#define HDCP_2_2_MAX_DEVICE_COUNT		31
+#define HDCP_2_2_RECEIVER_IDS_MAX_LEN		(HDCP_2_2_RECEIVER_ID_LEN * \
+						 HDCP_2_2_MAX_DEVICE_COUNT)
+#define HDCP_2_2_MPRIME_LEN			32
+
+/* Following Macros take a byte at a time for bit(s) masking */
+/*
+ * TODO: This has to be changed for DP MST, as multiple stream on
+ * same port is possible.
+ * For HDCP2.2 on HDMI and DP SST this value is always 1.
+ */
+#define HDCP_2_2_MAX_CONTENT_STREAMS_CNT	1
+#define HDCP_2_2_TXCAP_MASK_LEN			2
+#define HDCP_2_2_RXCAPS_LEN			3
+#define HDCP_2_2_RX_REPEATER(x)			((x) & BIT(0))
+#define HDCP_2_2_DP_HDCP_CAPABLE(x)		((x) & BIT(1))
+#define HDCP_2_2_RXINFO_LEN			2
+
+/* HDCP1.x compliant device in downstream */
+#define HDCP_2_2_HDCP1_DEVICE_CONNECTED(x)	((x) & BIT(0))
+
+/* HDCP2.0 Compliant repeater in downstream */
+#define HDCP_2_2_HDCP_2_0_REP_CONNECTED(x)	((x) & BIT(1))
+#define HDCP_2_2_MAX_CASCADE_EXCEEDED(x)	((x) & BIT(2))
+#define HDCP_2_2_MAX_DEVS_EXCEEDED(x)		((x) & BIT(3))
+#define HDCP_2_2_DEV_COUNT_LO(x)		(((x) & (0xF << 4)) >> 4)
+#define HDCP_2_2_DEV_COUNT_HI(x)		((x) & BIT(0))
+#define HDCP_2_2_DEPTH(x)			(((x) & (0x7 << 1)) >> 1)
+
+struct hdcp2_cert_rx {
+	u8	eceiver_id[HDCP_2_2_RECEIVER_ID_LEN];
+	u8	kpub_rx[HDCP_2_2_K_PUB_RX_LEN];
+	u8	reserved[2];
+	u8	dcp_signature[HDCP_2_2_DCP_LLC_SIG_LEN];
+} __packed;
+
+struct hdcp2_streamid_type {
+	u8	stream_id;
+	u8	stream_type;
+} __packed;
+
+/*
+ * The TxCaps field specified in the HDCP HDMI, DP specs
+ * This field is big endian as specified in the errata.
+ */
+struct hdcp2_tx_caps {
+	/* Transmitter must set this to 0x2 */
+	u8	version;
+
+	/* Reserved for HDCP and DP Spec. Read as Zero */
+	u8	tx_cap_mask[HDCP_2_2_TXCAP_MASK_LEN];
+} __packed;
+
+/* Main structures for HDCP2.2 protocol communication */
+struct hdcp2_ake_init {
+	u8			msg_id;
+	u8			r_tx[HDCP_2_2_RTX_LEN];
+	struct hdcp2_tx_caps	tx_caps;
+} __packed;
+
+struct hdcp2_ake_send_cert {
+	u8			msg_id;
+	struct hdcp2_cert_rx	cert_rx;
+	u8			r_rx[HDCP_2_2_RRX_LEN];
+	u8			rx_caps[HDCP_2_2_RXCAPS_LEN];
+} __packed;
+
+struct hdcp2_ake_no_stored_km {
+	u8	msg_id;
+	u8	e_kpub_km[HDCP_2_2_E_KPUB_KM_LEN];
+} __packed;
+
+struct hdcp2_ake_stored_km {
+	u8	msg_id;
+	u8	e_kh_km_m[HDCP_2_2_E_KH_KM_M_LEN];
+} __packed;
+
+struct hdcp2_ake_send_hprime {
+	u8	msg_id;
+	u8	h_prime[HDCP_2_2_H_PRIME_LEN];
+} __packed;
+
+struct hdcp2_ake_send_pairing_info {
+	u8	msg_id;
+	u8	e_kh_km[HDCP_2_2_E_KH_KM_LEN];
+} __packed;
+
+struct hdcp2_lc_init {
+	u8	msg_id;
+	u8	r_n[HDCP_2_2_RN_LEN];
+} __packed;
+
+struct hdcp2_lc_send_lprime {
+	u8	msg_id;
+	u8	l_prime[HDCP_2_2_L_PRIME_LEN];
+} __packed;
+
+struct hdcp2_ske_send_eks {
+	u8	msg_id;
+	u8	e_dkey_ks[HDCP_2_2_E_DKEY_KS_LEN];
+	u8	riv[HDCP_2_2_RIV_LEN];
+} __packed;
+
+struct hdcp2_rep_send_receiverid_list {
+	u8	msg_id;
+	u8	rx_info[HDCP_2_2_RXINFO_LEN];
+	u8	seq_num_v[HDCP_2_2_SEQ_NUM_LEN];
+	u8	v_prime[HDCP_2_2_V_PRIME_HALF_LEN];
+	u8	receiver_ids[HDCP_2_2_RECEIVER_IDS_MAX_LEN];
+} __packed;
+
+struct hdcp2_rep_send_ack {
+	u8	msg_id;
+	u8	v[HDCP_2_2_V_PRIME_HALF_LEN];
+} __packed;
+
+struct hdcp2_rep_stream_manage {
+	u8			msg_id;
+	u8			seq_num_m[HDCP_2_2_SEQ_NUM_LEN];
+	__be16			k;
+	struct hdcp2_streamid_type streams[HDCP_2_2_MAX_CONTENT_STREAMS_CNT];
+} __packed;
+
+struct hdcp2_rep_stream_ready {
+	u8	msg_id;
+	u8	m_prime[HDCP_2_2_MPRIME_LEN];
+} __packed;
+
+struct hdcp2_dp_errata_stream_type {
+	u8	msg_id;
+	u8	stream_type;
+} __packed;
+
 #endif
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH v7 2/39 drm: HDMI and DP specific HDCP2.2 defines

In reply to Ramalingam C

This patch adds HDCP register definitions for HDMI and DP HDCP adaptations.

HDMI specific HDCP2.2 register definitions are added into drm_hdcp.h, where as HDCP2.2 register offsets in DPCD offsets are defined at drm_dp_helper.h.

v2:
bit_field definitions are replaced by macros. [Tomas and Jani]
v3:
No Changes.
v4:
Comments style and typos are fixed [Uma]
v5:
Fix for macros.
v6:
Adds _MS to the timeouts to represent units [Sean Paul]
v7:
Macro DP_HDCP_2_2_REG_EKH_KM_OFFSET renamed [Uma] Redundant macro is removed [Uma]

---
 include/drm/drm_dp_helper.h | 51 +++++++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_hdcp.h      | 28 +++++++++++++++++++++++++
 2 files changed, 79 insertions(+)
include/drm/drm_dp_helper.h +51 -0
index 2a3843f248cf..8920ce12650c 100644
@@ -905,6 +905,57 @@
 #define DP_AUX_HDCP_KSV_FIFO		0x6802C
 #define DP_AUX_HDCP_AINFO		0x6803B
 
+/* DP HDCP2.2 parameter offsets in DPCD address space */
+#define DP_HDCP_2_2_REG_RTX_OFFSET		0x69000
+#define DP_HDCP_2_2_REG_TXCAPS_OFFSET		0x69008
+#define DP_HDCP_2_2_REG_CERT_RX_OFFSET		0x6900B
+#define DP_HDCP_2_2_REG_RRX_OFFSET		0x69215
+#define DP_HDCP_2_2_REG_RX_CAPS_OFFSET		0x6921D
+#define DP_HDCP_2_2_REG_EKPUB_KM_OFFSET		0x69220
+#define DP_HDCP_2_2_REG_EKH_KM_WR_OFFSET	0x692A0
+#define DP_HDCP_2_2_REG_M_OFFSET		0x692B0
+#define DP_HDCP_2_2_REG_HPRIME_OFFSET		0x692C0
+#define DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET	0x692E0
+#define DP_HDCP_2_2_REG_RN_OFFSET		0x692F0
+#define DP_HDCP_2_2_REG_LPRIME_OFFSET		0x692F8
+#define DP_HDCP_2_2_REG_EDKEY_KS_OFFSET		0x69318
+#define	DP_HDCP_2_2_REG_RIV_OFFSET		0x69328
+#define DP_HDCP_2_2_REG_RXINFO_OFFSET		0x69330
+#define DP_HDCP_2_2_REG_SEQ_NUM_V_OFFSET	0x69332
+#define DP_HDCP_2_2_REG_VPRIME_OFFSET		0x69335
+#define DP_HDCP_2_2_REG_RECV_ID_LIST_OFFSET	0x69345
+#define DP_HDCP_2_2_REG_V_OFFSET		0x693E0
+#define DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET	0x693F0
+#define DP_HDCP_2_2_REG_K_OFFSET		0x693F3
+#define DP_HDCP_2_2_REG_STREAM_ID_TYPE_OFFSET	0x693F5
+#define DP_HDCP_2_2_REG_MPRIME_OFFSET		0x69473
+#define DP_HDCP_2_2_REG_RXSTATUS_OFFSET		0x69493
+#define DP_HDCP_2_2_REG_STREAM_TYPE_OFFSET	0x69494
+#define DP_HDCP_2_2_REG_DBG_OFFSET		0x69518
+
+/* DP HDCP message start offsets in DPCD address space */
+#define DP_HDCP_2_2_AKE_INIT_OFFSET		DP_HDCP_2_2_REG_RTX_OFFSET
+#define DP_HDCP_2_2_AKE_SEND_CERT_OFFSET	DP_HDCP_2_2_REG_CERT_RX_OFFSET
+#define DP_HDCP_2_2_AKE_NO_STORED_KM_OFFSET	DP_HDCP_2_2_REG_EKPUB_KM_OFFSET
+#define DP_HDCP_2_2_AKE_STORED_KM_OFFSET	DP_HDCP_2_2_REG_EKH_KM_WR_OFFSET
+#define DP_HDCP_2_2_AKE_SEND_HPRIME_OFFSET	DP_HDCP_2_2_REG_HPRIME_OFFSET
+#define DP_HDCP_2_2_AKE_SEND_PAIRING_INFO_OFFSET \
+						DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET
+#define DP_HDCP_2_2_LC_INIT_OFFSET		DP_HDCP_2_2_REG_RN_OFFSET
+#define DP_HDCP_2_2_LC_SEND_LPRIME_OFFSET	DP_HDCP_2_2_REG_LPRIME_OFFSET
+#define DP_HDCP_2_2_SKE_SEND_EKS_OFFSET		DP_HDCP_2_2_REG_EDKEY_KS_OFFSET
+#define DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET	DP_HDCP_2_2_REG_RXINFO_OFFSET
+#define DP_HDCP_2_2_REP_SEND_ACK_OFFSET		DP_HDCP_2_2_REG_V_OFFSET
+#define DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET	DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET
+#define DP_HDCP_2_2_REP_STREAM_READY_OFFSET	DP_HDCP_2_2_REG_MPRIME_OFFSET
+
+#define HDCP_2_2_DP_RXSTATUS_LEN		1
+#define HDCP_2_2_DP_RXSTATUS_READY(x)		((x) & BIT(0))
+#define HDCP_2_2_DP_RXSTATUS_H_PRIME(x)		((x) & BIT(1))
+#define HDCP_2_2_DP_RXSTATUS_PAIRING(x)		((x) & BIT(2))
+#define HDCP_2_2_DP_RXSTATUS_REAUTH_REQ(x)	((x) & BIT(3))
+#define HDCP_2_2_DP_RXSTATUS_LINK_FAILED(x)	((x) & BIT(4))
+
 /* DP 1.2 Sideband message defines */
 /* peer device type - DP 1.2a Table 2-92 */
 #define DP_PEER_DEVICE_NONE		0x0
include/drm/drm_hdcp.h +28 -0
index dd36c5198c46..d54b0f2610d7 100644
@@ -222,4 +222,32 @@ struct hdcp2_dp_errata_stream_type {
 	u8	stream_type;
 } __packed;
 
+/* HDCP2.2 TIMEOUTs in mSec */
+#define HDCP_2_2_CERT_TIMEOUT_MS		100
+#define HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT_MS	1000
+#define HDCP_2_2_HPRIME_PAIRED_TIMEOUT_MS	200
+#define HDCP_2_2_PAIRING_TIMEOUT_MS		200
+#define	HDCP_2_2_HDMI_LPRIME_TIMEOUT_MS		20
+#define HDCP_2_2_DP_LPRIME_TIMEOUT_MS		7
+#define HDCP_2_2_RECVID_LIST_TIMEOUT_MS		3000
+#define HDCP_2_2_STREAM_READY_TIMEOUT_MS	100
+
+/* HDMI HDCP2.2 Register Offsets */
+#define HDCP_2_2_HDMI_REG_VER_OFFSET		0x50
+#define HDCP_2_2_HDMI_REG_WR_MSG_OFFSET		0x60
+#define HDCP_2_2_HDMI_REG_RXSTATUS_OFFSET	0x70
+#define HDCP_2_2_HDMI_REG_RD_MSG_OFFSET		0x80
+#define HDCP_2_2_HDMI_REG_DBG_OFFSET		0xC0
+
+#define HDCP_2_2_HDMI_SUPPORT_MASK		BIT(2)
+#define HDCP_2_2_RX_CAPS_VERSION_VAL		0x02
+#define HDCP_2_2_SEQ_NUM_MAX			0xFFFFFF
+#define	HDCP_2_2_DELAY_BEFORE_ENCRYPTION_EN	200
+
+/* Below macros take a byte at a time and mask the bit(s) */
+#define HDCP_2_2_HDMI_RXSTATUS_LEN		2
+#define HDCP_2_2_HDMI_RXSTATUS_MSG_SZ_HI(x)	((x) & 0x3)
+#define HDCP_2_2_HDMI_RXSTATUS_READY(x)		((x) & BIT(2))
+#define HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(x)	((x) & BIT(3))
+
 #endif
Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#3 lore raw

PATCH v7 3/39 linux/mei: Header for mei_hdcp driver interface

In reply to Ramalingam C

Data structures and Enum for the I915-MEI_HDCP interface are defined at <linux/mei_hdcp.h>

v2:
Rebased.
v3:
mei_cl_device is removed from mei_hdcp_data [Tomas]
v4:
Comment style and typo fixed [Uma]
v5:
Rebased.
v6:
No changes.
v7:
Remove redundant text from the License header Change uintXX_t type to uXX_t types
Remove uneeded include to mei_cl_bus.h Coding style fixed [Uma]

---
 include/linux/mei_hdcp.h | 76 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 include/linux/mei_hdcp.h
include/linux/mei_hdcp.h new file +76 -0
new file mode 100644
index 000000000000..a0ab505be9b1
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright © 2017-2018 Intel Corporation
+ *
+ * Authors:
+ * Ramalingam C <[email protected]>
+ */
+
+#ifndef _LINUX_MEI_HDCP_H
+#define _LINUX_MEI_HDCP_H
+
+/* Enumeration of the physical DDI available on the platform */
+enum hdcp_physical_port {
+	INVALID_PORT = 0x00,	/* Not a valid port */
+
+	DDI_RANGE_BEGIN = 0x01,	/* Beginning of the valid DDI port range */
+	DDI_B		= 0x01,		/* Port DDI B */
+	DDI_C		= 0x02,		/* Port DDI C */
+	DDI_D		= 0x03,		/* Port DDI D */
+	DDI_E		= 0x04,		/* Port DDI E */
+	DDI_F		= 0x05,		/* Port DDI F */
+	DDI_A		= 0x07,		/* Port DDI A */
+	DDI_RANGE_END	= DDI_A,/* End of the valid DDI port range */
+};
+
+/* The types of HDCP 2.2 ports supported */
+enum hdcp_integrated_port_type {
+	HDCP_INVALID_TYPE	= 0x00,
+
+	/* HDCP 2.x ports that are integrated into Intel HW */
+	INTEGRATED		= 0x01,
+
+	/* HDCP2.2 discrete wired Tx port with LSPCON (HDMI 2.0) solution */
+	LSPCON			= 0x02,
+
+	/* HDCP2.2 discrete wired Tx port using the CPDP (DP 1.3) solution */
+	CPDP			= 0x03,
+};
+
+/*
+ * wired_protocol: Supported integrated wired HDCP protocol.
+ * Based on this value, Minor difference needed between wired specifications
+ * are handled.
+ */
+enum hdcp_protocol {
+	HDCP_PROTOCOL_INVALID,
+	HDCP_PROTOCOL_HDMI,
+	HDCP_PROTOCOL_DP
+};
+
+/* mei_hdcp_data: Input data to the mei_hdcp APIs. */
+struct mei_hdcp_data {
+	enum hdcp_physical_port port;
+	enum hdcp_integrated_port_type port_type;
+	enum hdcp_protocol protocol;
+
+	/*
+	 * No of streams transmitted on a port.
+	 * In case of HDMI & DP SST, single stream will be
+	 * transmitted on a port.
+	 */
+	u16 k;
+
+	/*
+	 * Count of RepeaterAuth_Stream_Manage msg propagated.
+	 * Initialized to 0 on AKE_INIT. Incremented after every successful
+	 * transmission of RepeaterAuth_Stream_Manage message. When it rolls
+	 * over re-Auth has to be triggered.
+	 */
+	u32 seq_num_m;
+
+	/* k(No of Streams per port) x structure of wired_streamid_type */
+	struct hdcp2_streamid_type *streams;
+};
+
+#endif /* !_LINUX_MEI_HDCP_H */
Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#4 lore raw

PATCH v7 4/39 drm/i915: wrapping all hdcp var into intel_hdcp

In reply to Ramalingam C

Considering significant number of HDCP specific variables, it will be clean to have separate struct for HDCP.

New structure called intel_hdcp is added within intel_connector.

v2:
struct hdcp statically allocated. [Sean Paul]
enable and disable function parameters are retained.[Sean Paul]
v3:
No Changes.
v4:
Commit msg is rephrased [Uma]
v5:
Comment for mutex definition.
v6:
hdcp_ prefix from all intel_hdcp members are removed [Sean Paul] inline function intel_hdcp_to_connector is defined [Sean Paul]
v7:
%s/uint64_t/u64

---
 drivers/gpu/drm/i915/intel_display.c |   6 +-
 drivers/gpu/drm/i915/intel_drv.h     |  15 +++--
 drivers/gpu/drm/i915/intel_hdcp.c    | 107 +++++++++++++++++++----------------
 3 files changed, 72 insertions(+), 56 deletions(-)
drivers/gpu/drm/i915/intel_display.c +3 -3
index 4c5c2b39e65c..0f18618e6a1c 100644
@@ -16033,9 +16033,9 @@ static void intel_hpd_poll_fini(struct drm_device *dev)
 	for_each_intel_connector_iter(connector, &conn_iter) {
 		if (connector->modeset_retry_work.func)
 			cancel_work_sync(&connector->modeset_retry_work);
-		if (connector->hdcp_shim) {
-			cancel_delayed_work_sync(&connector->hdcp_check_work);
-			cancel_work_sync(&connector->hdcp_prop_work);
+		if (connector->hdcp.shim) {
+			cancel_delayed_work_sync(&connector->hdcp.check_work);
+			cancel_work_sync(&connector->hdcp.prop_work);
 		}
 	}
 	drm_connector_list_iter_end(&conn_iter);
drivers/gpu/drm/i915/intel_drv.h +10 -5
index 4fcba99d12c0..760be163a41e 100644
@@ -381,6 +381,15 @@ struct intel_hdcp_shim {
 			    bool *hdcp_capable);
 };
 
+struct intel_hdcp {
+	const struct intel_hdcp_shim *shim;
+	/* Mutex for hdcp state of the connector */
+	struct mutex mutex;
+	u64 value;
+	struct delayed_work check_work;
+	struct work_struct prop_work;
+};
+
 struct intel_connector {
 	struct drm_connector base;
 	/*
@@ -413,11 +422,7 @@ struct intel_connector {
 	/* Work struct to schedule a uevent on link train failure */
 	struct work_struct modeset_retry_work;
 
-	const struct intel_hdcp_shim *hdcp_shim;
-	struct mutex hdcp_mutex;
-	uint64_t hdcp_value; /* protected by hdcp_mutex */
-	struct delayed_work hdcp_check_work;
-	struct work_struct hdcp_prop_work;
+	struct intel_hdcp hdcp;
 };
 
 struct intel_digital_connector_state {
drivers/gpu/drm/i915/intel_hdcp.c +59 -48

237 lines not on this page · raw message

Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

PATCH v7 5/39 drm/i915: Define Intel HDCP2.2 registers

In reply to Ramalingam C

Intel HDCP2.2 registers are defined with addr offsets and bit details.

v2:
Replaced the arith calc with _PICK [Sean Paul]
v3:
No changes.
v4:
%s/HDCP2_CTR_DDI/HDCP2_CTL_DDI [Uma]
v5:
Added parentheses for the parameters of macro.
v6:
No changes
v7:
No changes

---
 drivers/gpu/drm/i915/i915_reg.h | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +32 -0
index 27e650fe591b..69fcb1b4d561 100644
@@ -9010,6 +9010,38 @@ enum skl_power_gate {
 #define  HDCP_STATUS_CIPHER		BIT(16)
 #define  HDCP_STATUS_FRAME_CNT(x)	(((x) >> 8) & 0xff)
 
+/* HDCP2.2 Registers */
+#define _PORTA_HDCP2_BASE		0x66800
+#define _PORTB_HDCP2_BASE		0x66500
+#define _PORTC_HDCP2_BASE		0x66600
+#define _PORTD_HDCP2_BASE		0x66700
+#define _PORTE_HDCP2_BASE		0x66A00
+#define _PORTF_HDCP2_BASE		0x66900
+#define _PORT_HDCP2_BASE(port, x)	_MMIO(_PICK((port), \
+					  _PORTA_HDCP2_BASE, \
+					  _PORTB_HDCP2_BASE, \
+					  _PORTC_HDCP2_BASE, \
+					  _PORTD_HDCP2_BASE, \
+					  _PORTE_HDCP2_BASE, \
+					  _PORTF_HDCP2_BASE) + (x))
+
+#define HDCP2_AUTH_DDI(port)		_PORT_HDCP2_BASE(port, 0x98)
+#define   AUTH_LINK_AUTHENTICATED	BIT(31)
+#define   AUTH_LINK_TYPE		BIT(30)
+#define   AUTH_FORCE_CLR_INPUTCTR	BIT(19)
+#define   AUTH_CLR_KEYS			BIT(18)
+
+#define HDCP2_CTL_DDI(port)		_PORT_HDCP2_BASE(port, 0xB0)
+#define   CTL_LINK_ENCRYPTION_REQ	BIT(31)
+
+#define HDCP2_STATUS_DDI(port)		_PORT_HDCP2_BASE(port, 0xB4)
+#define   STREAM_ENCRYPTION_STATUS_A	BIT(31)
+#define   STREAM_ENCRYPTION_STATUS_B	BIT(30)
+#define   STREAM_ENCRYPTION_STATUS_C	BIT(29)
+#define   LINK_TYPE_STATUS		BIT(22)
+#define   LINK_AUTH_STATUS		BIT(21)
+#define   LINK_ENCRYPTION_STATUS	BIT(20)
+
 /* Per-pipe DDI Function Control */
 #define _TRANS_DDI_FUNC_CTL_A		0x60400
 #define _TRANS_DDI_FUNC_CTL_B		0x61400
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

PATCH v7 6/39 component: alloc component_match without any comp to match

In reply to Ramalingam C

If all the components associated to a component master is not added to the component framework due to the HW capability or Kconfig selection, component_match will be NULL at component_master_add_with_match().

To avoid this, component_match_alloc() is added to the framework, to allcoate the struct component_match with zero associated components. Hence component master can be added with a component_match with zero associated components.

This helps the component master bind call to get triggered, even if no component is registered for that particular master.

This is meant for big PCI device drivers where small/optional features are external components, and based on usecases different combination of components are build as entire driver.

In such PCI device driver Load, if we use the component master for waiting for few components(features) availability, only if they are supported by the underlying HW, then we need to allocate memory for component_match using the API introduced in this change before the call to component_master_add_with_match.

v2:
No Change.

Cc Greg Kroah-Hartman <[email protected]>
Cc Kate Stewart <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Philippe Ombredanne <[email protected]>
---
 drivers/base/component.c  | 30 ++++++++++++++++++++++++++++++
 include/linux/component.h |  2 ++
 2 files changed, 32 insertions(+)
drivers/base/component.c +30 -0
index 8946dfee4768..007fb738263a 100644
@@ -312,6 +312,36 @@ static int component_match_realloc(struct device *dev,
 }
 
 /*
+ * Allocate the match without any component_match_array elements.
+ *
+ * This function is useful when the component master might end up
+ * registering itself without any matching components.
+ */
+void component_match_alloc(struct device *master,
+	struct component_match **matchptr)
+{
+	struct component_match *match = *matchptr;
+
+	if (IS_ERR(match))
+		return;
+
+	if (match)
+		return;
+
+	match = devres_alloc(devm_component_match_release,
+			     sizeof(*match), GFP_KERNEL);
+	if (!match) {
+		*matchptr = ERR_PTR(-ENOMEM);
+		return;
+	}
+
+	devres_add(master, match);
+
+	*matchptr = match;
+}
+EXPORT_SYMBOL(component_match_alloc);
+
+/*
  * Add a component to be matched, with a release function.
  *
  * The match array is first created or extended if necessary.
include/linux/component.h +2 -0
index e71fbbbc74e2..3f6b420a58f8 100644
@@ -37,6 +37,8 @@ void component_match_add_release(struct device *master,
 	struct component_match **matchptr,
 	void (*release)(struct device *, void *),
 	int (*compare)(struct device *, void *), void *compare_data);
+void component_match_alloc(struct device *master,
+	struct component_match **matchptr);
 
 static inline void component_match_add(struct device *master,
 	struct component_match **matchptr,
Signature · 1 line
2.7.4
#7 lore raw

PATCH v7 7/39 drm/i915: component master at i915 driver load

In reply to Ramalingam C

A generic component master is added to hold the i915 registration until all required kernel modules are up and active.

This is achieved through following steps:
- moving the i915 driver registration to the component master's bind call
- all required kernel modules will add one component each to component_match of I915 component master.

If no component is added to the I915 component master, due to CONFIG selection or HW limitation, component master's bind call (i915 registration) will be triggered with no wait.

Similarly when a associated component is removed for some reasons, I915 will be unregistered through component master unbind.

v2:
i915_driver_unregister is added to the unbind of master.

---
 drivers/gpu/drm/i915/i915_drv.c | 84 ++++++++++++++++++++++++++++++++++++++---
 drivers/gpu/drm/i915/i915_drv.h |  3 ++
 include/drm/i915_component.h    | 16 ++++++++
 3 files changed, 97 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +78 -6
index ade9bca250fa..9d8787f51870 100644
@@ -39,12 +39,14 @@
 #include <linux/vgaarb.h>
 #include <linux/vga_switcheroo.h>
 #include <linux/vt.h>
+#include <linux/component.h>
 #include <acpi/video.h>
 
 #include <drm/drmP.h>
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/i915_drm.h>
+#include <drm/i915_component.h>
 
 #include "i915_drv.h"
 #include "i915_trace.h"
@@ -1551,8 +1553,6 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
 	if (IS_GEN5(dev_priv))
 		intel_gpu_ips_init(dev_priv);
 
-	intel_audio_init(dev_priv);
-
 	/*
 	 * Some ports require correctly set-up hpd registers for detection to
 	 * work properly (leading to ghost connected connector status), e.g. VGA
@@ -1583,7 +1583,6 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
 	intel_power_domains_disable(dev_priv);
 
 	intel_fbdev_unregister(dev_priv);
-	intel_audio_deinit(dev_priv);
 
 	/*
 	 * After flushing the fbdev (incl. a late async config which will
@@ -1666,6 +1665,48 @@ static void i915_driver_destroy(struct drm_i915_private *i915)
 	pci_set_drvdata(pdev, NULL);
 }
 
+static void i915_driver_load_tail(struct drm_i915_private *dev_priv)
+{
+	i915_driver_register(dev_priv);
+
+	DRM_INFO("load_tail: I915 driver registered\n");
+}
+
+static void i915_driver_unload_head(struct drm_i915_private *dev_priv)
+{
+	i915_driver_unregister(dev_priv);
+
+	DRM_INFO("unload_head: I915 driver unregistered\n");
+}
+
+static int i915_component_master_bind(struct device *dev)
+{
+	struct drm_i915_private *dev_priv = kdev_to_i915(dev);
+	int ret;
+
+	ret = component_bind_all(dev, dev_priv->comp_master);
+	if (ret < 0)
+		return ret;
+
+	i915_driver_load_tail(dev_priv);
+
+	return 0;
+}
+
+static void i915_component_master_unbind(struct device *dev)
+{
+	struct drm_i915_private *dev_priv = kdev_to_i915(dev);
+
+	component_unbind_all(dev, dev_priv->comp_master);
+
+	i915_driver_unload_head(dev_priv);
+}
+
+static const struct component_master_ops i915_component_master_ops = {
+	.bind = i915_component_master_bind,
+	.unbind = i915_component_master_unbind,
+};
+
 /**
  * i915_driver_load - setup chip and create an initial config
  * @pdev: PCI device
@@ -1692,9 +1733,22 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!i915_modparams.nuclear_pageflip && match_info->gen < 5)
 		dev_priv->drm.driver_features &= ~DRIVER_ATOMIC;
 
+	dev_priv->comp_master = kzalloc(sizeof(*dev_priv->comp_master),
+					GFP_KERNEL);
+	if (!dev_priv->comp_master) {
+		ret = -ENOMEM;
+		goto out_fini;
+	}
+
+	component_match_alloc(dev_priv->drm.dev, &dev_priv->master_match);
+	if (!dev_priv->master_match) {
+		ret = -ENOMEM;
+		goto out_comp_master_clean;
+	}
+
 	ret = pci_enable_device(pdev);
 	if (ret)
-		goto out_fini;
+		goto out_comp_master_clean;
 
 	ret = i915_driver_init_early(dev_priv);
 	if (ret < 0)
@@ -1726,7 +1780,16 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ret < 0)
 		goto out_cleanup_hw;
 
-	i915_driver_register(dev_priv);
+	ret = component_master_add_with_match(dev_priv->drm.dev,
+					      &i915_component_master_ops,
+					      dev_priv->master_match);
+	if (ret < 0) {
+		DRM_DEV_ERROR(&pdev->dev, "Master comp add failed %d\n",
+			      ret);
+		goto out_cleanup_modeset;
+	}
+
+	intel_audio_init(dev_priv);
 
 	intel_init_ipc(dev_priv);
 
@@ -1734,8 +1797,12 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	i915_welcome_messages(dev_priv);
 
+	DRM_INFO("I915 registration waits for req component(s). if any...\n");
+
 	return 0;
 
+out_cleanup_modeset:
+	intel_modeset_cleanup(&dev_priv->drm);
 out_cleanup_hw:
 	i915_driver_cleanup_hw(dev_priv);
 out_cleanup_mmio:
@@ -1745,6 +1812,8 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
 	i915_driver_cleanup_early(dev_priv);
 out_pci_disable:
 	pci_disable_device(pdev);
+out_comp_master_clean:
+	kfree(dev_priv->comp_master);
 out_fini:
 	i915_load_error(dev_priv, "Device initialization failed (%d)\n", ret);
 	i915_driver_destroy(dev_priv);
@@ -1758,7 +1827,10 @@ void i915_driver_unload(struct drm_device *dev)
 
 	disable_rpm_wakeref_asserts(dev_priv);
 
-	i915_driver_unregister(dev_priv);
+	component_master_del(dev_priv->drm.dev, &i915_component_master_ops);
+	kfree(dev_priv->comp_master);
+
+	intel_audio_deinit(dev_priv);
 
 	if (i915_gem_suspend(dev_priv))
 		DRM_ERROR("failed to idle hardware; continuing to unload!\n");
drivers/gpu/drm/i915/i915_drv.h +3 -0
index 8624b4bdc242..c08385362a9d 100644
@@ -2167,6 +2167,9 @@ struct drm_i915_private {
 
 	struct i915_pmu pmu;
 
+	struct i915_component_master *comp_master;
+	struct component_match *master_match;
+
 	/*
 	 * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch
 	 * will be rejected. Instead look for a better place.
include/drm/i915_component.h +16 -0
index fca22d463e1b..d59f739b9218 100644
@@ -46,4 +46,20 @@ struct i915_audio_component {
 	int aud_sample_rate[MAX_PORTS];
 };
 
+/**
+ * struct i915_component_master - Used for communication between i915
+ * and any other drivers for the services of different feature.
+ */
+struct i915_component_master {
+	/**
+	 * @i915_kdev: Kdev of I915. Used from the client component for
+	 * removing the reference to mei_cldev.
+	 */
+	struct device *i915_kdev;
+
+	/*
+	 * Add here the interface details between I915 and interested modules.
+	 */
+};
+
 #endif /* _I915_COMPONENT_H_ */
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#8 lore raw

PATCH v7 8/39 drm/i915: Initialize HDCP2.2 and its MEI interface

In reply to Ramalingam C

Initialize HDCP2.2 support. This includes the mei interface initialization along with required component registration.

v2:
mei interface handle is protected with mutex. [Chris Wilson]
v3:
Notifiers are used for the mei interface state.
v4:
Poll for mei client device state
Error msg for out of mem [Uma]
Inline req for init function removed [Uma]
v5:
Rebase as Part of reordering.
Component is used for the I915 and MEI_HDCP interface [Daniel]
v6:
HDCP2.2 uses the I915 component master to communicate with mei_hdcp
- [Daniel]
Required HDCP2.2 variables defined [Sean Paul]
v7:
intel_hdcp2.2_init returns void [Uma]
Realigning the codes.

---
 drivers/gpu/drm/i915/intel_dp.c   |   3 +-
 drivers/gpu/drm/i915/intel_drv.h  |  23 ++++-
 drivers/gpu/drm/i915/intel_hdcp.c | 191 ++++++++++++++++++++++++++------------
 drivers/gpu/drm/i915/intel_hdmi.c |   2 +-
 include/drm/i915_component.h      |  60 ++++++++++++
 5 files changed, 216 insertions(+), 63 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +2 -1
index 6b4c19123f2a..893f8404e64c 100644
@@ -6626,7 +6626,8 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	intel_dp_add_properties(intel_dp, connector);
 
 	if (is_hdcp_supported(dev_priv, port) && !intel_dp_is_edp(intel_dp)) {
-		int ret = intel_hdcp_init(intel_connector, &intel_dp_hdcp_shim);
+		int ret = intel_hdcp_init(intel_connector, &intel_dp_hdcp_shim,
+					  false);
 		if (ret)
 			DRM_DEBUG_KMS("HDCP init failed, skipping.\n");
 	}
drivers/gpu/drm/i915/intel_drv.h +22 -1
index 760be163a41e..b18caaa96b26 100644
@@ -29,6 +29,7 @@
 #include <linux/i2c.h>
 #include <linux/hdmi.h>
 #include <linux/sched/clock.h>
+#include <linux/mei_hdcp.h>
 #include <drm/i915_drm.h>
 #include "i915_drv.h"
 #include <drm/drm_crtc.h>
@@ -379,6 +380,9 @@ struct intel_hdcp_shim {
 	/* Detects panel's hdcp capability. This is optional for HDMI. */
 	int (*hdcp_capable)(struct intel_digital_port *intel_dig_port,
 			    bool *hdcp_capable);
+
+	/* Detects the HDCP protocol(DP/HDMI) required on the port */
+	enum hdcp_protocol (*hdcp_protocol)(void);
 };
 
 struct intel_hdcp {
@@ -388,6 +392,20 @@ struct intel_hdcp {
 	u64 value;
 	struct delayed_work check_work;
 	struct work_struct prop_work;
+
+	/* HDCP2.2 related definitions */
+	/* Flag indicates whether this connector supports HDCP2.2 or not. */
+	bool hdcp2_supported;
+
+	/*
+	 * Content Stream Type defined by content owner. TYPE0(0x0) content can
+	 * flow in the link protected by HDCP2.2 or HDCP1.4, where as TYPE1(0x1)
+	 * content can flow only through a link protected by HDCP2.2.
+	 */
+	u8 content_type;
+
+	/* mei interface related information */
+	struct mei_hdcp_data mei_data;
 };
 
 struct intel_connector {
@@ -1935,11 +1953,14 @@ void intel_hdcp_atomic_check(struct drm_connector *connector,
 			     struct drm_connector_state *old_state,
 			     struct drm_connector_state *new_state);
 int intel_hdcp_init(struct intel_connector *connector,
-		    const struct intel_hdcp_shim *hdcp_shim);
+		    const struct intel_hdcp_shim *hdcp_shim,
+		    bool hdcp2_supported);
 int intel_hdcp_enable(struct intel_connector *connector);
 int intel_hdcp_disable(struct intel_connector *connector);
 int intel_hdcp_check_link(struct intel_connector *connector);
 bool is_hdcp_supported(struct drm_i915_private *dev_priv, enum port port);
+int intel_hdcp_component_init(struct drm_i915_private *dev_priv);
+bool is_hdcp2_supported(struct drm_i915_private *dev_priv);
 
 /* intel_psr.c */
 #define CAN_PSR(dev_priv) (HAS_PSR(dev_priv) && dev_priv->psr.sink_support)
drivers/gpu/drm/i915/intel_hdcp.c +131 -60

230 lines not on this page · raw message

drivers/gpu/drm/i915/intel_hdmi.c +1 -1
index a2dab0b6bde6..dff62df6d704 100644
@@ -2382,7 +2382,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 
 	if (is_hdcp_supported(dev_priv, port)) {
 		int ret = intel_hdcp_init(intel_connector,
-					  &intel_hdmi_hdcp_shim);
+					  &intel_hdmi_hdcp_shim, false);
 		if (ret)
 			DRM_DEBUG_KMS("HDCP init failed, skipping.\n");
 	}
include/drm/i915_component.h +60 -0

78 lines not on this page · raw message

Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#9 lore raw

PATCH v7 9/39 drm/i915: Pullout the bksv read and validation

In reply to Ramalingam C

For reusability purpose, this patch implements the hdcp1.4 bksv's read and validation as a functions.

For detecting the HDMI panel's HDCP capability this fucntions will be used.

v2:
Rebased.
v3:
No Changes.
v4:
inline tag is removed with modified error msg.
v5:
No Changes.
v6:
No Changes.
v7:
Realigned the code.

---
 drivers/gpu/drm/i915/intel_hdcp.c | 62 ++++++++++++++++++++++++---------------
 1 file changed, 38 insertions(+), 24 deletions(-)
drivers/gpu/drm/i915/intel_hdcp.c +38 -24
index b1b6dfdd3c91..171733919430 100644
@@ -20,6 +20,41 @@
 #define GET_MEI_DDI_INDEX(port)		(((port) == PORT_A) ? DDI_A : \
 					 (enum hdcp_physical_port)(port))
 
+static
+bool intel_hdcp_is_ksv_valid(u8 *ksv)
+{
+	int i, ones = 0;
+	/* KSV has 20 1's and 20 0's */
+	for (i = 0; i < DRM_HDCP_KSV_LEN; i++)
+		ones += hweight8(ksv[i]);
+	if (ones != 20)
+		return false;
+
+	return true;
+}
+
+static
+int intel_hdcp_read_valid_bksv(struct intel_digital_port *intel_dig_port,
+			       const struct intel_hdcp_shim *shim, u8 *bksv)
+{
+	int ret, i, tries = 2;
+
+	/* HDCP spec states that we must retry the bksv if it is invalid */
+	for (i = 0; i < tries; i++) {
+		ret = shim->read_bksv(intel_dig_port, bksv);
+		if (ret)
+			return ret;
+		if (intel_hdcp_is_ksv_valid(bksv))
+			break;
+	}
+	if (i == tries) {
+		DRM_ERROR("Bksv is invalid\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int intel_hdcp_poll_ksv_fifo(struct intel_digital_port *intel_dig_port,
 				    const struct intel_hdcp_shim *shim)
 {
@@ -172,18 +207,6 @@ u32 intel_hdcp_get_repeater_ctl(struct intel_digital_port *intel_dig_port)
 }
 
 static
-bool intel_hdcp_is_ksv_valid(u8 *ksv)
-{
-	int i, ones = 0;
-	/* KSV has 20 1's and 20 0's */
-	for (i = 0; i < DRM_HDCP_KSV_LEN; i++)
-		ones += hweight8(ksv[i]);
-	if (ones != 20)
-		return false;
-	return true;
-}
-
-static
 int intel_hdcp_validate_v_prime(struct intel_digital_port *intel_dig_port,
 				const struct intel_hdcp_shim *shim,
 				u8 *ksv_fifo, u8 num_downstream, u8 *bstatus)
@@ -531,18 +554,9 @@ static int intel_hdcp_auth(struct intel_digital_port *intel_dig_port,
 
 	memset(&bksv, 0, sizeof(bksv));
 
-	/* HDCP spec states that we must retry the bksv if it is invalid */
-	for (i = 0; i < tries; i++) {
-		ret = shim->read_bksv(intel_dig_port, bksv.shim);
-		if (ret)
-			return ret;
-		if (intel_hdcp_is_ksv_valid(bksv.shim))
-			break;
-	}
-	if (i == tries) {
-		DRM_ERROR("HDCP failed, Bksv is invalid\n");
-		return -ENODEV;
-	}
+	ret = intel_hdcp_read_valid_bksv(intel_dig_port, shim, bksv.shim);
+	if (ret < 0)
+		return ret;
 
 	I915_WRITE(PORT_HDCP_BKSVLO(port), bksv.reg[0]);
 	I915_WRITE(PORT_HDCP_BKSVHI(port), bksv.reg[1]);
Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#10 lore raw

PATCH v7 10/39 drm/i915: Enable and Disable of HDCP2.2

In reply to Ramalingam C

Considering that HDCP2.2 is more secure than HDCP1.4, When a setup supports HDCP2.2 and HDCP1.4, HDCP2.2 will be enabled.

When HDCP2.2 enabling fails and HDCP1.4 is supported, HDCP1.4 is enabled.

This change implements a sequence of enabling and disabling of HDCP2.2 authentication and HDCP2.2 port encryption.

v2:
Included few optimization suggestions [Chris Wilson] Commit message is updated as per the rebased version. intel_wait_for_register is used instead of wait_for. [Chris Wilson]
v3:
No changes.
v4:
Extra comment added and Style issue fixed [Uma]
v5:
Rebased as part of patch reordering.
HDCP2 encryption status is tracked.
HW state check is moved into WARN_ON [Daniel]
v6:
Redefined the mei service functions as per comp redesign. Merged patches related to hdcp2.2 enabling and disabling [Sean Paul]. Required shim functionality is defined [Sean Paul]
v7:
Return values are handles [Uma]
Realigned the code.
Check for comp_master is removed.

---
 drivers/gpu/drm/i915/intel_drv.h  |   5 +
 drivers/gpu/drm/i915/intel_hdcp.c | 234 ++++++++++++++++++++++++++++++++++++--
 2 files changed, 229 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/intel_drv.h +5 -0
index b18caaa96b26..5838cc7eb048 100644
@@ -383,6 +383,10 @@ struct intel_hdcp_shim {
 
 	/* Detects the HDCP protocol(DP/HDMI) required on the port */
 	enum hdcp_protocol (*hdcp_protocol)(void);
+
+	/* Detects whether Panel is HDCP2.2 capable */
+	int (*hdcp_2_2_capable)(struct intel_digital_port *intel_dig_port,
+				bool *capable);
 };
 
 struct intel_hdcp {
@@ -396,6 +400,7 @@ struct intel_hdcp {
 	/* HDCP2.2 related definitions */
 	/* Flag indicates whether this connector supports HDCP2.2 or not. */
 	bool hdcp2_supported;
+	bool hdcp2_in_use;
 
 	/*
 	 * Content Stream Type defined by content owner. TYPE0(0x0) content can
drivers/gpu/drm/i915/intel_hdcp.c +224 -10

275 lines not on this page · raw message

Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#11 lore raw

PATCH v7 11/39 drm/i915: Implement HDCP2.2 receiver authentication

In reply to Ramalingam C

Implements HDCP2.2 authentication for hdcp2.2 receivers, with following steps:
Authentication and Key exchange (AKE). Locality Check (LC).
Session Key Exchange(SKE).
DP Errata for stream type configuration for receivers.

At AKE, the HDCP Receiver’s public key certificate is verified by the HDCP Transmitter. A Master Key k m is exchanged.

At LC, the HDCP Transmitter enforces locality on the content by requiring that the Round Trip Time (RTT) between a pair of messages is not more than 20 ms.

At SKE, The HDCP Transmitter exchanges Session Key ks with the HDCP Receiver.

In DP HDCP2.2 encryption and decryption logics use the stream type as one of the parameter. So Before enabling the Encryption DP HDCP2.2 receiver needs to be communicated with stream type. This is added to spec as ERRATA.

This generic implementation is complete only with the hdcp2_shim defined.

v2:
Rebased.
v3:
No Changes.
v4:
%s/PARING/PAIRING
Coding style fixing [Uma]
v5:
Rebased as part of patch reordering.
Defined the functions for mei services. [Daniel]
v6:
Redefined the mei service functions as per comp redesign. Required intel_hdcp members are defined [Sean Paul]
v7:
Typo of cipher is Fixed [Uma]
%s/uintxx_t/uxx
Check for comp_master is removed.

---
 drivers/gpu/drm/i915/intel_drv.h  |  34 ++++
 drivers/gpu/drm/i915/intel_hdcp.c | 345 +++++++++++++++++++++++++++++++++++++-
 2 files changed, 377 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_drv.h +34 -0
index 5838cc7eb048..12b6f43fd0a7 100644
@@ -387,6 +387,22 @@ struct intel_hdcp_shim {
 	/* Detects whether Panel is HDCP2.2 capable */
 	int (*hdcp_2_2_capable)(struct intel_digital_port *intel_dig_port,
 				bool *capable);
+
+	/* Write HDCP2.2 messages */
+	int (*write_2_2_msg)(struct intel_digital_port *intel_dig_port,
+			     void *buf, size_t size);
+
+	/* Read HDCP2.2 messages */
+	int (*read_2_2_msg)(struct intel_digital_port *intel_dig_port,
+			    u8 msg_id, void *buf, size_t size);
+
+	/*
+	 * Implementation of DP HDCP2.2 Errata for the communication of stream
+	 * type to Receivers. In DP HDCP2.2 Stream type is one of the input to
+	 * the HDCP2.2 Cipher for En/De-Cryption. Not applicable for HDMI.
+	 */
+	int (*config_stream_type)(struct intel_digital_port *intel_dig_port,
+				  void *buf, size_t size);
 };
 
 struct intel_hdcp {
@@ -411,6 +427,24 @@ struct intel_hdcp {
 
 	/* mei interface related information */
 	struct mei_hdcp_data mei_data;
+
+	bool is_paired;
+	bool is_repeater;
+
+	/*
+	 * Count of ReceiverID_List received. Initialized to 0 at AKE_INIT.
+	 * Incremented after processing the RepeaterAuth_Send_ReceiverID_List.
+	 * When it rolls over re-auth has to be triggered.
+	 */
+	u32 seq_num_v;
+
+	/*
+	 * Count of RepeaterAuth_Stream_Manage msg propagated.
+	 * Initialized to 0 on AKE_INIT. Incremented after every successful
+	 * transmission of RepeaterAuth_Stream_Manage message. When it rolls
+	 * over re-Auth has to be triggered.
+	 */
+	u32 seq_num_m;
 };
 
 struct intel_connector {
drivers/gpu/drm/i915/intel_hdcp.c +343 -2

366 lines not on this page · raw message

Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#12 lore raw

PATCH v7 12/39 drm/i915: Implement HDCP2.2 repeater authentication

In reply to Ramalingam C

Implements the HDCP2.2 repeaters authentication steps such as verifying the downstream topology and sending stream management information.

v2:
Rebased.
v3:
No Changes.
v4:
-EINVAL is returned for topology error and rollover scenario. Endianness conversion func from drm_hdcp.h is used [Uma]
v5:
Rebased as part of patches reordering.
Defined the mei service functions [Daniel]
v6:
Redefined the mei service functions as per comp redesign.
v7:
%s/uintxx_t/uxx
Check for comp_master is removed.

---
 drivers/gpu/drm/i915/intel_hdcp.c | 165 ++++++++++++++++++++++++++++++++++++++
 include/drm/drm_hdcp.h            |  15 ++++
 2 files changed, 180 insertions(+)
drivers/gpu/drm/i915/intel_hdcp.c +165 -0
index 9791b4fd4495..3772db5d4171 100644
@@ -1002,6 +1002,50 @@ static int hdcp2_prepare_skey(struct intel_connector *connector,
 	return ret;
 }
 
+static int
+hdcp2_verify_rep_topology_prepare_ack(
+			struct intel_connector *connector,
+			struct hdcp2_rep_send_receiverid_list *rep_topology,
+			struct hdcp2_rep_send_ack *rep_send_ack)
+{
+	struct mei_hdcp_data *data = &connector->hdcp.mei_data;
+	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+	struct i915_component_master *comp = dev_priv->comp_master;
+	int ret;
+
+	if (!comp->hdcp_ops || !comp->mei_cldev || data->port == INVALID_PORT)
+		return -EINVAL;
+
+	ret = comp->hdcp_ops->repeater_check_flow_prepare_ack(comp->mei_cldev,
+							      data,
+							      rep_topology,
+							      rep_send_ack);
+	if (ret < 0)
+		comp->hdcp_ops->close_hdcp_session(comp->mei_cldev, data);
+
+	return ret;
+}
+
+static int
+hdcp2_verify_mprime(struct intel_connector *connector,
+		    struct hdcp2_rep_stream_ready *stream_ready)
+{
+	struct mei_hdcp_data *data = &connector->hdcp.mei_data;
+	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+	struct i915_component_master *comp = dev_priv->comp_master;
+	int ret;
+
+	if (!comp->hdcp_ops || !comp->mei_cldev || data->port == INVALID_PORT)
+		return -EINVAL;
+
+	ret = comp->hdcp_ops->verify_mprime(comp->mei_cldev, data,
+					    stream_ready);
+	if (ret < 0)
+		comp->hdcp_ops->close_hdcp_session(comp->mei_cldev, data);
+
+	return ret;
+}
+
 static int hdcp2_authenticate_port(struct intel_connector *connector)
 {
 	struct mei_hdcp_data *data = &connector->hdcp.mei_data;
@@ -1171,6 +1215,121 @@ static int hdcp2_session_key_exchange(struct intel_connector *connector)
 	return 0;
 }
 
+static
+int hdcp2_propagate_stream_management_info(struct intel_connector *connector)
+{
+	struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
+	struct intel_hdcp *hdcp = &connector->hdcp;
+	union {
+		struct hdcp2_rep_stream_manage stream_manage;
+		struct hdcp2_rep_stream_ready stream_ready;
+	} msgs;
+	const struct intel_hdcp_shim *shim = hdcp->shim;
+	int ret;
+
+	/* Prepare RepeaterAuth_Stream_Manage msg */
+	msgs.stream_manage.msg_id = HDCP_2_2_REP_STREAM_MANAGE;
+	reverse_endianness(msgs.stream_manage.seq_num_m, HDCP_2_2_SEQ_NUM_LEN,
+			   (u8 *)&hdcp->seq_num_m);
+
+	/* K no of streams is fixed as 1. Stored as big-endian. */
+	msgs.stream_manage.k = __swab16(1);
+
+	/* For HDMI this is forced to be 0x0. For DP SST also this is 0x0. */
+	msgs.stream_manage.streams[0].stream_id = 0;
+	msgs.stream_manage.streams[0].stream_type = hdcp->content_type;
+
+	/* Send it to Repeater */
+	ret = shim->write_2_2_msg(intel_dig_port, &msgs.stream_manage,
+				  sizeof(msgs.stream_manage));
+	if (ret < 0)
+		return ret;
+
+	ret = shim->read_2_2_msg(intel_dig_port, HDCP_2_2_REP_STREAM_READY,
+				 &msgs.stream_ready, sizeof(msgs.stream_ready));
+	if (ret < 0)
+		return ret;
+
+	hdcp->mei_data.seq_num_m = hdcp->seq_num_m;
+	hdcp->mei_data.streams[0].stream_type = hdcp->content_type;
+
+	ret = hdcp2_verify_mprime(connector, &msgs.stream_ready);
+	if (ret < 0)
+		return ret;
+
+	hdcp->seq_num_m++;
+
+	if (hdcp->seq_num_m > HDCP_2_2_SEQ_NUM_MAX) {
+		DRM_DEBUG_KMS("seq_num_m roll over.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static
+int hdcp2_authenticate_repeater_topology(struct intel_connector *connector)
+{
+	struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
+	struct intel_hdcp *hdcp = &connector->hdcp;
+	union {
+		struct hdcp2_rep_send_receiverid_list recvid_list;
+		struct hdcp2_rep_send_ack rep_ack;
+	} msgs;
+	const struct intel_hdcp_shim *shim = hdcp->shim;
+	u8 *rx_info;
+	u32 seq_num_v;
+	int ret;
+
+	ret = shim->read_2_2_msg(intel_dig_port, HDCP_2_2_REP_SEND_RECVID_LIST,
+				 &msgs.recvid_list, sizeof(msgs.recvid_list));
+	if (ret < 0)
+		return ret;
+
+	rx_info = msgs.recvid_list.rx_info;
+
+	if (HDCP_2_2_MAX_CASCADE_EXCEEDED(rx_info[1]) ||
+	    HDCP_2_2_MAX_DEVS_EXCEEDED(rx_info[1])) {
+		DRM_DEBUG_KMS("Topology Max Size Exceeded\n");
+		return -EINVAL;
+	}
+
+	/* Converting and Storing the seq_num_v to local variable as DWORD */
+	reverse_endianness((u8 *)&seq_num_v, HDCP_2_2_SEQ_NUM_LEN,
+			   msgs.recvid_list.seq_num_v);
+
+	if (seq_num_v < hdcp->seq_num_v) {
+		/* Roll over of the seq_num_v from repeater. Reauthenticate. */
+		DRM_DEBUG_KMS("Seq_num_v roll over.\n");
+		return -EINVAL;
+	}
+
+	ret = hdcp2_verify_rep_topology_prepare_ack(connector,
+						    &msgs.recvid_list,
+						    &msgs.rep_ack);
+	if (ret < 0)
+		return ret;
+
+	hdcp->seq_num_v = seq_num_v;
+	ret = shim->write_2_2_msg(intel_dig_port, &msgs.rep_ack,
+				  sizeof(msgs.rep_ack));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int hdcp2_authenticate_repeater(struct intel_connector *connector)
+{
+	int ret;
+
+	ret = hdcp2_authenticate_repeater_topology(connector);
+	if (ret < 0)
+		return ret;
+
+	return hdcp2_propagate_stream_management_info(connector);
+}
+
 static int hdcp2_authenticate_sink(struct intel_connector *connector)
 {
 	struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
@@ -1212,6 +1371,12 @@ static int hdcp2_authenticate_sink(struct intel_connector *connector)
 					       sizeof(stream_type_msg));
 		if (ret < 0)
 			return ret;
+	} else if (hdcp->is_repeater) {
+		ret = hdcp2_authenticate_repeater(connector);
+		if (ret < 0) {
+			DRM_DEBUG_KMS("Repeater Auth Failed. Err: %d\n", ret);
+			return ret;
+		}
 	}
 
 	hdcp->mei_data.streams[0].stream_type = hdcp->content_type;
include/drm/drm_hdcp.h +15 -0
index d54b0f2610d7..92e616778473 100644
@@ -250,4 +250,19 @@ struct hdcp2_dp_errata_stream_type {
 #define HDCP_2_2_HDMI_RXSTATUS_READY(x)		((x) & BIT(2))
 #define HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(x)	((x) & BIT(3))
 
+/*
+ * Library functions for endianness are aligned for 16/32/64 bits.
+ * But hdcp sequence numbers are 24bits. So for their Byte swapping,
+ * a conversion function is developed.
+ */
+static inline void reverse_endianness(u8 *dest, size_t sz, u8 *src)
+{
+	u32 index;
+
+	if (!sz || sz > sizeof(u32))
+		return;
+	for (index = 0; index < sz; index++)
+		dest[sz - index - 1] = src[index];
+}
+
 #endif
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#13 lore raw

PATCH v7 13/39 drm/i915: Implement HDCP2.2 link integrity check

In reply to Ramalingam C

Implements the link integrity check once in 500mSec.

Once encryption is enabled, an ongoing Link Integrity Check is performed by the HDCP Receiver to check that cipher synchronization is maintained between the HDCP Transmitter and the HDCP Receiver.

On the detection of synchronization lost, the HDCP Receiver must assert the corresponding bits of the RxStatus register. The Transmitter polls the RxStatus register and it may initiate re-authentication.

v2:
Rebased.
v3:
No Changes.
v4:
enum check_link_response is used check the link status [Uma]
v5:
Rebased as part of patch reordering.
v6:
Required members of intel_hdcp is defined [Sean Paul]
v7:
hdcp2_check_link is cancelled at required places.

---
 drivers/gpu/drm/i915/intel_display.c |  2 +
 drivers/gpu/drm/i915/intel_drv.h     |  5 +++
 drivers/gpu/drm/i915/intel_hdcp.c    | 82 +++++++++++++++++++++++++++++++++++-
 include/drm/drm_hdcp.h               |  8 ++++
 4 files changed, 96 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_display.c +2 -0
index 0f18618e6a1c..41a7b10f73dd 100644
@@ -16035,6 +16035,8 @@ static void intel_hpd_poll_fini(struct drm_device *dev)
 			cancel_work_sync(&connector->modeset_retry_work);
 		if (connector->hdcp.shim) {
 			cancel_delayed_work_sync(&connector->hdcp.check_work);
+			cancel_delayed_work_sync(
+					&connector->hdcp.hdcp2_check_work);
 			cancel_work_sync(&connector->hdcp.prop_work);
 		}
 	}
drivers/gpu/drm/i915/intel_drv.h +5 -0
index 12b6f43fd0a7..be12b7928375 100644
@@ -403,6 +403,9 @@ struct intel_hdcp_shim {
 	 */
 	int (*config_stream_type)(struct intel_digital_port *intel_dig_port,
 				  void *buf, size_t size);
+
+	/* HDCP2.2 Link Integrity Check */
+	int (*check_2_2_link)(struct intel_digital_port *intel_dig_port);
 };
 
 struct intel_hdcp {
@@ -445,6 +448,8 @@ struct intel_hdcp {
 	 * over re-Auth has to be triggered.
 	 */
 	u32 seq_num_m;
+
+	struct delayed_work hdcp2_check_work;
 };
 
 struct intel_connector {
drivers/gpu/drm/i915/intel_hdcp.c +81 -1

107 lines not on this page · raw message

include/drm/drm_hdcp.h +8 -0
index 92e616778473..b7ab8156095c 100644
@@ -11,6 +11,14 @@
 
 /* Period of hdcp checks (to ensure we're still authenticated) */
 #define DRM_HDCP_CHECK_PERIOD_MS		(128 * 16)
+#define DRM_HDCP2_CHECK_PERIOD_MS		500
+
+enum check_link_response {
+	DRM_HDCP_LINK_PROTECTED	= 0,
+	DRM_HDCP_TOPOLOGY_CHANGE,
+	DRM_HDCP_LINK_INTEGRITY_FAILURE,
+	DRM_HDCP_REAUTH_REQUEST
+};
 
 /* Shared lengths/masks between HDMI/DVI/DisplayPort */
 #define DRM_HDCP_AN_LEN				8
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#14 lore raw

PATCH v7 14/39 drm/i915: Handle HDCP2.2 downstream topology change

In reply to Ramalingam C

When repeater notifies a downstream topology change, this patch reauthenticate the repeater alone without disabling the hdcp encryption. If that fails then complete reauthentication is executed.

v2:
Rebased.
v3:
No Changes.
v4:
Typo in commit msg is fixed [Uma]
v5:
Rebased as part of patch reordering.
Minor style fixes.
v6:
Rebased.
v7:
Rebased.

---
 drivers/gpu/drm/i915/intel_hdcp.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_hdcp.c +17 -2
index d37b9441492b..89e913732b2d 100644
@@ -1562,8 +1562,23 @@ static int intel_hdcp2_check_link(struct intel_connector *connector)
 		goto out;
 	}
 
-	DRM_ERROR("[%s:%d] HDCP2.2 link failed, retrying auth\n",
-		  connector->base.name, connector->base.base.id);
+	if (ret == DRM_HDCP_TOPOLOGY_CHANGE) {
+		if (hdcp->value == DRM_MODE_CONTENT_PROTECTION_UNDESIRED)
+			goto out;
+
+		DRM_DEBUG_KMS("HDCP2.2 Downstream topology change\n");
+		ret = hdcp2_authenticate_repeater_topology(connector);
+		if (!ret) {
+			hdcp->value = DRM_MODE_CONTENT_PROTECTION_ENABLED;
+			schedule_work(&hdcp->prop_work);
+			goto out;
+		}
+		DRM_ERROR("[%s:%d] Repeater topology auth failed.(%d)\n",
+			  connector->base.name, connector->base.base.id, ret);
+	} else {
+		DRM_ERROR("[%s:%d] HDCP2.2 link failed, retrying auth\n",
+			  connector->base.name, connector->base.base.id);
+	}
 
 	ret = _intel_hdcp2_disable(connector);
 	if (ret) {
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#15 lore raw

PATCH v7 15/39 drm/i915: hdcp_check_link only on CP_IRQ

In reply to Ramalingam C

HDCP check link is invoked only on CP_IRQ detection, instead of all short pulses.

v3:
No Changes.
v4:
Added sean in cc and collected the reviewed-by received.
v5:
No Change.
v6:
No Change.
v7:
No Change.

---
 drivers/gpu/drm/i915/intel_dp.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +4 -5
index 893f8404e64c..bd83ee585cd3 100644
@@ -4483,8 +4483,10 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)
 
 		if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST)
 			intel_dp_handle_test_request(intel_dp);
-		if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ))
-			DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
+		if (sink_irq_vector & DP_CP_IRQ)
+			intel_hdcp_check_link(intel_dp->attached_connector);
+		if (sink_irq_vector & DP_SINK_SPECIFIC_IRQ)
+			DRM_DEBUG_DRIVER("Sink specific irq unhandled\n");
 	}
 
 	/* Handle CEC interrupts, if any */
@@ -5676,9 +5678,6 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
 
 		handled = intel_dp_short_pulse(intel_dp);
 
-		/* Short pulse can signify loss of hdcp authentication */
-		intel_hdcp_check_link(intel_dp->attached_connector);
-
 		if (!handled) {
 			intel_dp->detect_done = false;
 			goto put_power;
Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#16 lore raw

PATCH v7 16/39 drm/i915: Check HDCP 1.4 and 2.2 link on CP_IRQ

In reply to Ramalingam C

On DP HDCP1.4 and 2.2, when CP_IRQ is received, start the link integrity check for the HDCP version that is enabled.

v2:
Rebased. Function name is changed.
v3:
No Changes.
v4:
No Changes.
v5:
No Changes.
v6:
%s/_in_force/_in_use [Sean Paul]
v7:
Rebased.

---
 drivers/gpu/drm/i915/intel_dp.c   |  2 +-
 drivers/gpu/drm/i915/intel_drv.h  |  2 +-
 drivers/gpu/drm/i915/intel_hdcp.c | 29 +++++++++++++++++++++++++++++
 3 files changed, 31 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +1 -1
index bd83ee585cd3..11699688c36a 100644
@@ -4484,7 +4484,7 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)
 		if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST)
 			intel_dp_handle_test_request(intel_dp);
 		if (sink_irq_vector & DP_CP_IRQ)
-			intel_hdcp_check_link(intel_dp->attached_connector);
+			intel_hdcp_handle_cp_irq(intel_dp->attached_connector);
 		if (sink_irq_vector & DP_SINK_SPECIFIC_IRQ)
 			DRM_DEBUG_DRIVER("Sink specific irq unhandled\n");
 	}
drivers/gpu/drm/i915/intel_drv.h +1 -1
index be12b7928375..af580eb171a5 100644
@@ -2001,10 +2001,10 @@ int intel_hdcp_init(struct intel_connector *connector,
 		    bool hdcp2_supported);
 int intel_hdcp_enable(struct intel_connector *connector);
 int intel_hdcp_disable(struct intel_connector *connector);
-int intel_hdcp_check_link(struct intel_connector *connector);
 bool is_hdcp_supported(struct drm_i915_private *dev_priv, enum port port);
 int intel_hdcp_component_init(struct drm_i915_private *dev_priv);
 bool is_hdcp2_supported(struct drm_i915_private *dev_priv);
+void intel_hdcp_handle_cp_irq(struct intel_connector *connector);
 
 /* intel_psr.c */
 #define CAN_PSR(dev_priv) (HAS_PSR(dev_priv) && dev_priv->psr.sink_support)
drivers/gpu/drm/i915/intel_hdcp.c +29 -0
index 89e913732b2d..1f6bc1155405 100644
@@ -93,6 +93,26 @@ static bool intel_hdcp2_capable(struct intel_connector *connector)
 	return capable;
 }
 
+static inline bool intel_hdcp_in_use(struct intel_connector *connector)
+{
+	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+	enum port port = connector->encoder->port;
+	u32 reg;
+
+	reg = I915_READ(PORT_HDCP_STATUS(port));
+	return reg & (HDCP_STATUS_AUTH | HDCP_STATUS_ENC);
+}
+
+static inline bool intel_hdcp2_in_use(struct intel_connector *connector)
+{
+	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+	enum port port = connector->encoder->port;
+	u32 reg;
+
+	reg = I915_READ(HDCP2_STATUS_DDI(port));
+	return reg & (LINK_ENCRYPTION_STATUS | LINK_AUTH_STATUS);
+}
+
 static int intel_hdcp_poll_ksv_fifo(struct intel_digital_port *intel_dig_port,
 				    const struct intel_hdcp_shim *shim)
 {
@@ -1795,3 +1815,12 @@ void intel_hdcp_atomic_check(struct drm_connector *connector,
 						   new_state->crtc);
 	crtc_state->mode_changed = true;
 }
+
+/* Handles the CP_IRQ raised from the DP HDCP sink */
+void intel_hdcp_handle_cp_irq(struct intel_connector *connector)
+{
+	if (intel_hdcp_in_use(connector))
+		intel_hdcp_check_link(connector);
+	else if (intel_hdcp2_in_use(connector))
+		intel_hdcp2_check_link(connector);
+}
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#17 lore raw

PATCH v7 17/39 drm/i915: Implement the HDCP2.2 support for DP

In reply to Ramalingam C

Implements the DP adaptation specific HDCP2.2 functions.

These functions perform the DPCD read and write for communicating the HDCP2.2 auth message back and forth.

v2:
wait for cp_irq is merged with this patch. Rebased.
v3:
wait_queue is used for wait for cp_irq [Chris Wilson]
v4:
Style fixed.
%s/PARING/PAIRING
Few style fixes [Uma]
v5:
Lookup table for DP HDCP2.2 msg details [Daniel]. Extra lines are removed.
v6:
Rebased.
v7:
Fixed some regression introduced at v5. [Ankit] Macro HDCP_2_2_RX_CAPS_VERSION_VAL is reused [Uma] Converted a function to inline [Uma] %s/uintxx_t/uxx

---
 drivers/gpu/drm/i915/intel_dp.c   | 338 ++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h  |   7 +
 drivers/gpu/drm/i915/intel_hdcp.c |   6 +
 3 files changed, 351 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +338 -0
index 11699688c36a..1d0147b70b0b 100644
@@ -31,6 +31,7 @@
 #include <linux/types.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
+#include <linux/mei_hdcp.h>
 #include <asm/byteorder.h>
 #include <drm/drmP.h>
 #include <drm/drm_atomic_helper.h>
@@ -5308,6 +5309,27 @@ void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
 	pps_unlock(intel_dp);
 }
 
+static int intel_dp_hdcp_wait_for_cp_irq(struct intel_hdcp *hdcp,
+					 int timeout)
+{
+	long ret;
+
+	/* Reinit */
+	atomic_set(&hdcp->cp_irq_recved, 0);
+
+#define C (atomic_read(&hdcp->cp_irq_recved) > 0)
+	ret = wait_event_interruptible_timeout(hdcp->cp_irq_queue, C,
+					       msecs_to_jiffies(timeout));
+
+	if (ret > 0) {
+		atomic_set(&hdcp->cp_irq_recved, 0);
+		return 0;
+	} else if (!ret) {
+		return -ETIMEDOUT;
+	}
+	return (int)ret;
+}
+
 static
 int intel_dp_hdcp_write_an_aksv(struct intel_digital_port *intel_dig_port,
 				u8 *an)
@@ -5526,6 +5548,316 @@ int intel_dp_hdcp_capable(struct intel_digital_port *intel_dig_port,
 	return 0;
 }
 
+static struct hdcp2_dp_msg_data {
+	u8 msg_id;
+	u32 offset;
+	bool msg_detectable;
+	u32 timeout;
+	u32 timeout2; /* Added for non_paired situation */
+	} hdcp2_msg_data[] = {
+		{HDCP_2_2_AKE_INIT, DP_HDCP_2_2_AKE_INIT_OFFSET, false, 0, 0},
+		{HDCP_2_2_AKE_SEND_CERT, DP_HDCP_2_2_AKE_SEND_CERT_OFFSET,
+				false, HDCP_2_2_CERT_TIMEOUT_MS, 0},
+		{HDCP_2_2_AKE_NO_STORED_KM, DP_HDCP_2_2_AKE_NO_STORED_KM_OFFSET,
+				false, 0, 0},
+		{HDCP_2_2_AKE_STORED_KM, DP_HDCP_2_2_AKE_STORED_KM_OFFSET,
+				false, 0, 0},
+		{HDCP_2_2_AKE_SEND_HPRIME, DP_HDCP_2_2_AKE_SEND_HPRIME_OFFSET,
+				true, HDCP_2_2_HPRIME_PAIRED_TIMEOUT_MS,
+				HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT_MS},
+		{HDCP_2_2_AKE_SEND_PAIRING_INFO,
+				DP_HDCP_2_2_AKE_SEND_PAIRING_INFO_OFFSET, true,
+				HDCP_2_2_PAIRING_TIMEOUT_MS, 0},
+		{HDCP_2_2_LC_INIT, DP_HDCP_2_2_LC_INIT_OFFSET, false, 0, 0},
+		{HDCP_2_2_LC_SEND_LPRIME, DP_HDCP_2_2_LC_SEND_LPRIME_OFFSET,
+				false, HDCP_2_2_DP_LPRIME_TIMEOUT_MS, 0},
+		{HDCP_2_2_SKE_SEND_EKS, DP_HDCP_2_2_SKE_SEND_EKS_OFFSET, false,
+				0, 0},
+		{HDCP_2_2_REP_SEND_RECVID_LIST,
+				DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET, true,
+				HDCP_2_2_RECVID_LIST_TIMEOUT_MS, 0},
+		{HDCP_2_2_REP_SEND_ACK, DP_HDCP_2_2_REP_SEND_ACK_OFFSET, false,
+				0, 0},
+		{HDCP_2_2_REP_STREAM_MANAGE,
+				DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET, false,
+				0, 0},
+		{HDCP_2_2_REP_STREAM_READY, DP_HDCP_2_2_REP_STREAM_READY_OFFSET,
+				false, HDCP_2_2_STREAM_READY_TIMEOUT_MS, 0},
+		{HDCP_2_2_ERRATA_DP_STREAM_TYPE,
+				DP_HDCP_2_2_REG_STREAM_TYPE_OFFSET, false,
+				0, 0},
+		};
+
+static inline
+int intel_dp_hdcp2_read_rx_status(struct intel_digital_port *intel_dig_port,
+				  u8 *rx_status)
+{
+	ssize_t ret;
+
+	ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux,
+			       DP_HDCP_2_2_REG_RXSTATUS_OFFSET, rx_status,
+			       HDCP_2_2_DP_RXSTATUS_LEN);
+	if (ret != HDCP_2_2_DP_RXSTATUS_LEN) {
+		DRM_ERROR("Read bstatus from DP/AUX failed (%zd)\n", ret);
+		return ret >= 0 ? -EIO : ret;
+	}
+
+	return 0;
+}
+
+static
+int hdcp2_detect_msg_availability(struct intel_digital_port *intel_dig_port,
+				  u8 msg_id, bool *msg_ready)
+{
+	u8 rx_status;
+	int ret;
+
+	*msg_ready = false;
+	ret = intel_dp_hdcp2_read_rx_status(intel_dig_port, &rx_status);
+	if (ret < 0)
+		return ret;
+
+	switch (msg_id) {
+	case HDCP_2_2_AKE_SEND_HPRIME:
+		if (HDCP_2_2_DP_RXSTATUS_H_PRIME(rx_status))
+			*msg_ready = true;
+		break;
+	case HDCP_2_2_AKE_SEND_PAIRING_INFO:
+		if (HDCP_2_2_DP_RXSTATUS_PAIRING(rx_status))
+			*msg_ready = true;
+		break;
+	case HDCP_2_2_REP_SEND_RECVID_LIST:
+		if (HDCP_2_2_DP_RXSTATUS_READY(rx_status))
+			*msg_ready = true;
+		break;
+	default:
+		DRM_DEBUG_KMS("Unidentified msg_id: %d\n", msg_id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static ssize_t
+intel_dp_hdcp2_wait_for_msg(struct intel_digital_port *intel_dig_port,
+			    struct hdcp2_dp_msg_data *hdcp2_msg_data)
+{
+	struct intel_dp *dp = &intel_dig_port->dp;
+	struct intel_hdcp *hdcp = &dp->attached_connector->hdcp;
+	int ret, timeout;
+	bool msg_ready = false;
+
+	if (hdcp2_msg_data->msg_id == HDCP_2_2_AKE_SEND_HPRIME &&
+	    !hdcp->is_paired)
+		timeout = hdcp2_msg_data->timeout2;
+	else
+		timeout = hdcp2_msg_data->timeout;
+
+	/*
+	 * There is no way to detect the CERT, LPRIME and STREAM_READY
+	 * availability. So Wait for timeout and read the msg.
+	 */
+	if (!hdcp2_msg_data->msg_detectable) {
+		mdelay(timeout);
+		ret = 0;
+	} else {
+		/*
+		 * Ignoring the return of the intel_dp_hdcp_wait_for_cp_irq,
+		 * Just to detect the msg availability before failing it.
+		 */
+		intel_dp_hdcp_wait_for_cp_irq(hdcp, timeout);
+		ret = hdcp2_detect_msg_availability(intel_dig_port,
+						    hdcp2_msg_data->msg_id,
+						    &msg_ready);
+		if (!msg_ready)
+			ret = -ETIMEDOUT;
+	}
+
+	if (ret)
+		DRM_ERROR("msg_id %d, ret %d, timeout(mSec): %d\n",
+			  hdcp2_msg_data->msg_id, ret, timeout);
+
+	return ret;
+}
+
+static struct hdcp2_dp_msg_data *get_hdcp2_dp_msg_data(u8 msg_id)
+{
+	int i;
+
+	for (i = 0; i < sizeof(hdcp2_msg_data); i++)
+		if (hdcp2_msg_data[i].msg_id == msg_id)
+			return &hdcp2_msg_data[i];
+
+	return NULL;
+}
+
+static
+int intel_dp_hdcp2_write_msg(struct intel_digital_port *intel_dig_port,
+			     void *buf, size_t size)
+{
+	unsigned int offset;
+	u8 *byte = buf;
+	ssize_t ret, bytes_to_write, len;
+	struct hdcp2_dp_msg_data *hdcp2_msg_data;
+
+	hdcp2_msg_data = get_hdcp2_dp_msg_data(*byte);
+	if (!hdcp2_msg_data)
+		return -EINVAL;
+
+	offset = hdcp2_msg_data->offset;
+
+	/* No msg_id in DP HDCP2.2 msgs */
+	bytes_to_write = size - 1;
+	byte++;
+
+	while (bytes_to_write) {
+		len = bytes_to_write > DP_AUX_MAX_PAYLOAD_BYTES ?
+				DP_AUX_MAX_PAYLOAD_BYTES : bytes_to_write;
+
+		ret = drm_dp_dpcd_write(&intel_dig_port->dp.aux,
+					offset, (void *)byte, len);
+		if (ret < 0)
+			return ret;
+
+		bytes_to_write -= ret;
+		byte += ret;
+		offset += ret;
+	}
+
+	return size;
+}
+
+static
+ssize_t get_receiver_id_list_size(struct intel_digital_port *intel_dig_port)
+{
+	u8 rx_info[HDCP_2_2_RXINFO_LEN];
+	u32 dev_cnt;
+	ssize_t ret;
+
+	ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux,
+			       DP_HDCP_2_2_REG_RXINFO_OFFSET,
+			       (void *)rx_info, HDCP_2_2_RXINFO_LEN);
+	if (ret != HDCP_2_2_RXINFO_LEN)
+		return ret >= 0 ? -EIO : ret;
+
+	dev_cnt = (HDCP_2_2_DEV_COUNT_HI(rx_info[0]) << 4 |
+		   HDCP_2_2_DEV_COUNT_LO(rx_info[1]));
+
+	if (dev_cnt > HDCP_2_2_MAX_DEVICE_COUNT)
+		dev_cnt = HDCP_2_2_MAX_DEVICE_COUNT;
+
+	ret = sizeof(struct hdcp2_rep_send_receiverid_list) -
+		HDCP_2_2_RECEIVER_IDS_MAX_LEN +
+		(dev_cnt * HDCP_2_2_RECEIVER_ID_LEN);
+
+	return ret;
+}
+
+static
+int intel_dp_hdcp2_read_msg(struct intel_digital_port *intel_dig_port,
+			    u8 msg_id, void *buf, size_t size)
+{
+	unsigned int offset;
+	u8 *byte = buf;
+	ssize_t ret, bytes_to_recv, len;
+	struct hdcp2_dp_msg_data *hdcp2_msg_data;
+
+	hdcp2_msg_data = get_hdcp2_dp_msg_data(msg_id);
+	if (!hdcp2_msg_data)
+		return -EINVAL;
+	offset = hdcp2_msg_data->offset;
+
+	ret = intel_dp_hdcp2_wait_for_msg(intel_dig_port, hdcp2_msg_data);
+	if (ret < 0)
+		return ret;
+
+	if (msg_id == HDCP_2_2_REP_SEND_RECVID_LIST) {
+		ret = get_receiver_id_list_size(intel_dig_port);
+		if (ret < 0)
+			return ret;
+
+		size = ret;
+	}
+	bytes_to_recv = size - 1;
+
+	/* DP adaptation msgs has no msg_id */
+	byte++;
+
+	while (bytes_to_recv) {
+		len = bytes_to_recv > DP_AUX_MAX_PAYLOAD_BYTES ?
+		      DP_AUX_MAX_PAYLOAD_BYTES : bytes_to_recv;
+
+		ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, offset,
+				       (void *)byte, len);
+		if (ret < 0) {
+			DRM_DEBUG_KMS("msg_id %d, ret %zd\n", msg_id, ret);
+			return ret;
+		}
+
+		bytes_to_recv -= ret;
+		byte += ret;
+		offset += ret;
+	}
+	byte = buf;
+	*byte = msg_id;
+
+	return size;
+}
+
+static
+int intel_dp_hdcp2_config_stream_type(struct intel_digital_port *intel_dig_port,
+				      void *buf, size_t size)
+{
+	return intel_dp_hdcp2_write_msg(intel_dig_port, buf, size);
+}
+
+static
+int intel_dp_hdcp2_check_link(struct intel_digital_port *intel_dig_port)
+{
+	u8 rx_status;
+	int ret;
+
+	ret = intel_dp_hdcp2_read_rx_status(intel_dig_port, &rx_status);
+	if (ret)
+		return ret;
+
+	if (HDCP_2_2_DP_RXSTATUS_REAUTH_REQ(rx_status))
+		ret = DRM_HDCP_REAUTH_REQUEST;
+	else if (HDCP_2_2_DP_RXSTATUS_LINK_FAILED(rx_status))
+		ret = DRM_HDCP_LINK_INTEGRITY_FAILURE;
+	else if (HDCP_2_2_DP_RXSTATUS_READY(rx_status))
+		ret = DRM_HDCP_TOPOLOGY_CHANGE;
+
+	return ret;
+}
+
+static
+int intel_dp_hdcp2_capable(struct intel_digital_port *intel_dig_port,
+			   bool *capable)
+{
+	u8 rx_caps[3];
+	int ret;
+
+	*capable = false;
+	ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux,
+			       DP_HDCP_2_2_REG_RX_CAPS_OFFSET,
+			       rx_caps, HDCP_2_2_RXCAPS_LEN);
+	if (ret != HDCP_2_2_RXCAPS_LEN)
+		return ret >= 0 ? -EIO : ret;
+
+	if (rx_caps[0] == HDCP_2_2_RX_CAPS_VERSION_VAL &&
+	    HDCP_2_2_DP_HDCP_CAPABLE(rx_caps[2]))
+		*capable = true;
+
+	return 0;
+}
+
+static inline
+enum hdcp_protocol intel_dp_hdcp2_protocol(void)
+{
+	return HDCP_PROTOCOL_DP;
+}
+
 static const struct intel_hdcp_shim intel_dp_hdcp_shim = {
 	.write_an_aksv = intel_dp_hdcp_write_an_aksv,
 	.read_bksv = intel_dp_hdcp_read_bksv,
@@ -5538,6 +5870,12 @@ static const struct intel_hdcp_shim intel_dp_hdcp_shim = {
 	.toggle_signalling = intel_dp_hdcp_toggle_signalling,
 	.check_link = intel_dp_hdcp_check_link,
 	.hdcp_capable = intel_dp_hdcp_capable,
+	.write_2_2_msg = intel_dp_hdcp2_write_msg,
+	.read_2_2_msg = intel_dp_hdcp2_read_msg,
+	.config_stream_type = intel_dp_hdcp2_config_stream_type,
+	.check_2_2_link = intel_dp_hdcp2_check_link,
+	.hdcp_2_2_capable = intel_dp_hdcp2_capable,
+	.hdcp_protocol = intel_dp_hdcp2_protocol,
 };
 
 static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp)
drivers/gpu/drm/i915/intel_drv.h +7 -0
index af580eb171a5..9d924baed74d 100644
@@ -450,6 +450,13 @@ struct intel_hdcp {
 	u32 seq_num_m;
 
 	struct delayed_work hdcp2_check_work;
+
+	/*
+	 * Work queue to signal the CP_IRQ. Used for the waiters to read the
+	 * available information from HDCP DP sink.
+	 */
+	wait_queue_head_t cp_irq_queue;
+	atomic_t cp_irq_recved;
 };
 
 struct intel_connector {
drivers/gpu/drm/i915/intel_hdcp.c +6 -0
index 1f6bc1155405..1f8550a03030 100644
@@ -1718,6 +1718,9 @@ int intel_hdcp_init(struct intel_connector *connector,
 	if (hdcp2_supported)
 		intel_hdcp2_init(connector);
 
+	atomic_set(&hdcp->cp_irq_recved, 0);
+	init_waitqueue_head(&hdcp->cp_irq_queue);
+
 	return 0;
 }
 
@@ -1823,4 +1826,7 @@ void intel_hdcp_handle_cp_irq(struct intel_connector *connector)
 		intel_hdcp_check_link(connector);
 	else if (intel_hdcp2_in_use(connector))
 		intel_hdcp2_check_link(connector);
+
+	atomic_set(&connector->hdcp.cp_irq_recved, 1);
+	wake_up_all(&connector->hdcp.cp_irq_queue);
 }
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#18 lore raw

PATCH v7 18/39 drm/i915: Implement the HDCP2.2 support for HDMI

In reply to Ramalingam C

Implements the HDMI adaptation specific HDCP2.2 operations.

Basically these are DDC read and write for authenticating through HDCP2.2 messages.

v2:
Rebased.
v3:
No Changes.
v4:
No more special handling of Gmbus burst read for AKE_SEND_CERT. Style fixed with few naming. [Uma]
%s/PARING/PAIRING
v5:
msg_sz is initialized at definition.
Lookup table is defined for HDMI HDCP2.2 msgs [Daniel].
v6:
Rebased.
v7:
Make a function as inline [Uma]
%s/uintxx_t/uxx

---
 drivers/gpu/drm/i915/intel_hdmi.c | 190 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 190 insertions(+)
drivers/gpu/drm/i915/intel_hdmi.c +190 -0
index dff62df6d704..a6fe0e42d348 100644
@@ -30,6 +30,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/hdmi.h>
+#include <linux/mei_hdcp.h>
 #include <drm/drmP.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
@@ -1120,6 +1121,190 @@ bool intel_hdmi_hdcp_check_link(struct intel_digital_port *intel_dig_port)
 	return true;
 }
 
+static struct hdcp2_hdmi_msg_data {
+	u8 msg_id;
+	u32 timeout;
+	u32 timeout2;
+	} hdcp2_msg_data[] = {
+		{HDCP_2_2_AKE_INIT, 0, 0},
+		{HDCP_2_2_AKE_SEND_CERT, HDCP_2_2_CERT_TIMEOUT_MS, 0},
+		{HDCP_2_2_AKE_NO_STORED_KM, 0, 0},
+		{HDCP_2_2_AKE_STORED_KM, 0, 0},
+		{HDCP_2_2_AKE_SEND_HPRIME, HDCP_2_2_HPRIME_PAIRED_TIMEOUT_MS,
+				HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT_MS},
+		{HDCP_2_2_AKE_SEND_PAIRING_INFO, HDCP_2_2_PAIRING_TIMEOUT_MS,
+				0},
+		{HDCP_2_2_LC_INIT, 0, 0},
+		{HDCP_2_2_LC_SEND_LPRIME, HDCP_2_2_HDMI_LPRIME_TIMEOUT_MS, 0},
+		{HDCP_2_2_SKE_SEND_EKS, 0, 0},
+		{HDCP_2_2_REP_SEND_RECVID_LIST,
+				HDCP_2_2_RECVID_LIST_TIMEOUT_MS, 0},
+		{HDCP_2_2_REP_SEND_ACK, 0, 0},
+		{HDCP_2_2_REP_STREAM_MANAGE, 0, 0},
+		{HDCP_2_2_REP_STREAM_READY, HDCP_2_2_STREAM_READY_TIMEOUT_MS,
+				0},
+	};
+
+static
+int intel_hdmi_hdcp2_read_rx_status(struct intel_digital_port *intel_dig_port,
+				    uint8_t *rx_status)
+{
+	return intel_hdmi_hdcp_read(intel_dig_port,
+				    HDCP_2_2_HDMI_REG_RXSTATUS_OFFSET,
+				    rx_status,
+				    HDCP_2_2_HDMI_RXSTATUS_LEN);
+}
+
+static int get_hdcp2_msg_timeout(u8 msg_id, bool is_paired)
+{
+	int i;
+
+	for (i = 0; i < sizeof(hdcp2_msg_data); i++)
+		if (hdcp2_msg_data[i].msg_id == msg_id &&
+		    (msg_id != HDCP_2_2_AKE_SEND_HPRIME || is_paired))
+			return hdcp2_msg_data[i].timeout;
+		else if (hdcp2_msg_data[i].msg_id == msg_id)
+			return hdcp2_msg_data[i].timeout2;
+
+	return -EINVAL;
+}
+
+static inline
+int hdcp2_detect_msg_availability(struct intel_digital_port *intel_digital_port,
+				  u8 msg_id, bool *msg_ready,
+				  ssize_t *msg_sz)
+{
+	u8 rx_status[HDCP_2_2_HDMI_RXSTATUS_LEN];
+	int ret;
+
+	ret = intel_hdmi_hdcp2_read_rx_status(intel_digital_port, rx_status);
+	if (ret < 0) {
+		DRM_DEBUG_KMS("rx_status read failed. Err %d\n", ret);
+		return ret;
+	}
+
+	*msg_sz = ((HDCP_2_2_HDMI_RXSTATUS_MSG_SZ_HI(rx_status[1]) << 8) |
+		  rx_status[0]);
+
+	if (msg_id == HDCP_2_2_REP_SEND_RECVID_LIST)
+		*msg_ready = (HDCP_2_2_HDMI_RXSTATUS_READY(rx_status[1]) &&
+			     *msg_sz);
+	else
+		*msg_ready = *msg_sz;
+
+	return 0;
+}
+
+static ssize_t
+intel_hdmi_hdcp2_wait_for_msg(struct intel_digital_port *intel_dig_port,
+			      u8 msg_id, bool paired)
+{
+	bool msg_ready = false;
+	int timeout, ret;
+	ssize_t msg_sz = 0;
+
+	timeout = get_hdcp2_msg_timeout(msg_id, paired);
+	if (timeout < 0)
+		return timeout;
+
+	ret = __wait_for(ret = hdcp2_detect_msg_availability(intel_dig_port,
+							     msg_id, &msg_ready,
+							     &msg_sz),
+			 !ret && msg_ready && msg_sz, timeout * 1000,
+			 1000, 5 * 1000);
+	if (ret)
+		DRM_ERROR("msg_id: %d, ret: %d, timeout: %d\n",
+			  msg_id, ret, timeout);
+
+	return ret ? ret : msg_sz;
+}
+
+static
+int intel_hdmi_hdcp2_write_msg(struct intel_digital_port *intel_dig_port,
+			       void *buf, size_t size)
+{
+	unsigned int offset;
+
+	offset = HDCP_2_2_HDMI_REG_WR_MSG_OFFSET;
+	return intel_hdmi_hdcp_write(intel_dig_port, offset, buf, size);
+}
+
+static
+int intel_hdmi_hdcp2_read_msg(struct intel_digital_port *intel_dig_port,
+			      u8 msg_id, void *buf, size_t size)
+{
+	struct intel_hdmi *hdmi = &intel_dig_port->hdmi;
+	struct intel_hdcp *hdcp = &hdmi->attached_connector->hdcp;
+	unsigned int offset;
+	ssize_t ret;
+
+	ret = intel_hdmi_hdcp2_wait_for_msg(intel_dig_port, msg_id,
+					    hdcp->is_paired);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Available msg size should be equal to or lesser than the
+	 * available buffer.
+	 */
+	if (ret > size) {
+		DRM_DEBUG_KMS("msg_sz(%zd) is more than exp size(%zu)\n",
+			      ret, size);
+		return -1;
+	}
+
+	offset = HDCP_2_2_HDMI_REG_RD_MSG_OFFSET;
+	ret = intel_hdmi_hdcp_read(intel_dig_port, offset, buf, ret);
+	if (ret)
+		DRM_DEBUG_KMS("Failed to read msg_id: %d(%zd)\n", msg_id, ret);
+
+	return ret;
+}
+
+static
+int intel_hdmi_hdcp2_check_link(struct intel_digital_port *intel_dig_port)
+{
+	u8 rx_status[HDCP_2_2_HDMI_RXSTATUS_LEN];
+	int ret;
+
+	ret = intel_hdmi_hdcp2_read_rx_status(intel_dig_port, rx_status);
+	if (ret)
+		return ret;
+
+	/*
+	 * Re-auth request and Link Integrity Failures are represented by
+	 * same bit. i.e reauth_req.
+	 */
+	if (HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(rx_status[1]))
+		ret = DRM_HDCP_REAUTH_REQUEST;
+	else if (HDCP_2_2_HDMI_RXSTATUS_READY(rx_status[1]))
+		ret = DRM_HDCP_TOPOLOGY_CHANGE;
+
+	return ret;
+}
+
+static
+int intel_hdmi_hdcp2_capable(struct intel_digital_port *intel_dig_port,
+			     bool *capable)
+{
+	u8 hdcp2_version;
+	int ret;
+
+	*capable = false;
+	ret = intel_hdmi_hdcp_read(intel_dig_port, HDCP_2_2_HDMI_REG_VER_OFFSET,
+				   &hdcp2_version, sizeof(hdcp2_version));
+	if (!ret && hdcp2_version & HDCP_2_2_HDMI_SUPPORT_MASK)
+		*capable = true;
+
+	return ret;
+}
+
+static inline
+enum hdcp_protocol intel_hdmi_hdcp2_protocol(void)
+{
+	return HDCP_PROTOCOL_HDMI;
+}
+
 static const struct intel_hdcp_shim intel_hdmi_hdcp_shim = {
 	.write_an_aksv = intel_hdmi_hdcp_write_an_aksv,
 	.read_bksv = intel_hdmi_hdcp_read_bksv,
@@ -1131,6 +1316,11 @@ static const struct intel_hdcp_shim intel_hdmi_hdcp_shim = {
 	.read_v_prime_part = intel_hdmi_hdcp_read_v_prime_part,
 	.toggle_signalling = intel_hdmi_hdcp_toggle_signalling,
 	.check_link = intel_hdmi_hdcp_check_link,
+	.write_2_2_msg = intel_hdmi_hdcp2_write_msg,
+	.read_2_2_msg = intel_hdmi_hdcp2_read_msg,
+	.check_2_2_link	= intel_hdmi_hdcp2_check_link,
+	.hdcp_2_2_capable = intel_hdmi_hdcp2_capable,
+	.hdcp_protocol = intel_hdmi_hdcp2_protocol,
 };
 
 static void intel_hdmi_prepare(struct intel_encoder *encoder,
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#19 lore raw

PATCH v7 19/39 drm/i915: Add HDCP2.2 support for DP connectors

In reply to Ramalingam C

On DP connector init, intel_hdcp_init is passed with a flag for hdcp2.2 support based on the platform capability.

v2:
Rebased.
v3:
No Changes.
v4:
Collected the reviewed-by received.
v5:
No change.
v6:
No change.
v7:
No change.

---
 drivers/gpu/drm/i915/intel_dp.c  | 2 +-
 drivers/gpu/drm/i915/intel_drv.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_dp.c +1 -1
index 1d0147b70b0b..edd01ddfc728 100644
@@ -6964,7 +6964,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 
 	if (is_hdcp_supported(dev_priv, port) && !intel_dp_is_edp(intel_dp)) {
 		int ret = intel_hdcp_init(intel_connector, &intel_dp_hdcp_shim,
-					  false);
+					  is_hdcp2_supported(dev_priv));
 		if (ret)
 			DRM_DEBUG_KMS("HDCP init failed, skipping.\n");
 	}
drivers/gpu/drm/i915/intel_drv.h +1 -0
index 9d924baed74d..f688bfacaa99 100644
@@ -2012,6 +2012,7 @@ bool is_hdcp_supported(struct drm_i915_private *dev_priv, enum port port);
 int intel_hdcp_component_init(struct drm_i915_private *dev_priv);
 bool is_hdcp2_supported(struct drm_i915_private *dev_priv);
 void intel_hdcp_handle_cp_irq(struct intel_connector *connector);
+bool is_hdcp2_supported(struct drm_i915_private *dev_priv);
 
 /* intel_psr.c */
 #define CAN_PSR(dev_priv) (HAS_PSR(dev_priv) && dev_priv->psr.sink_support)
Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#20 lore raw

PATCH v7 20/39 drm/i915: Add HDCP2.2 support for HDMI connectors

In reply to Ramalingam C

On HDMI connector init, intel_hdcp_init is passed with a flag for hdcp2.2 support based on the platform capability.

v2:
Rebased.
v3:
No Changes.
v4:
Collected the reviewed-by received.
v5:
No change.
v6:
No change.
v7:
No change.

---
 drivers/gpu/drm/i915/intel_hdmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_hdmi.c +2 -1
index a6fe0e42d348..0ae59cfbb6fa 100644
@@ -2572,7 +2572,8 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 
 	if (is_hdcp_supported(dev_priv, port)) {
 		int ret = intel_hdcp_init(intel_connector,
-					  &intel_hdmi_hdcp_shim, false);
+					 &intel_hdmi_hdcp_shim,
+					 is_hdcp2_supported(dev_priv));
 		if (ret)
 			DRM_DEBUG_KMS("HDCP init failed, skipping.\n");
 	}
Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#21 lore raw

PATCH v7 21/39 mei: bus: whitelist hdcp client

In reply to Ramalingam C

From: Tomas Winkler <[email protected]>

Whitelist HDCP client for in kernel drm use

v2:
Rebased.
v3:
No changes.
v4:
No changes.
v5:
No changes.
v6:
No changes
v7:
No changes

---
 drivers/misc/mei/bus-fixup.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
drivers/misc/mei/bus-fixup.c +16 -0
index a6f41f96f2a1..c307399f898c 100644
@@ -41,6 +41,9 @@ static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO;
 #define MEI_UUID_MKHIF_FIX UUID_LE(0x55213584, 0x9a29, 0x4916, \
 			0xba, 0xdf, 0xf, 0xb7, 0xed, 0x68, 0x2a, 0xeb)
 
+#define MEI_UUID_HDCP UUID_LE(0xB638AB7E, 0x94E2, 0x4EA2, \
+			      0xA5, 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04)
+
 #define MEI_UUID_ANY NULL_UUID_LE
 
 /**
@@ -72,6 +75,18 @@ static void blacklist(struct mei_cl_device *cldev)
 	cldev->do_match = 0;
 }
 
+/**
+ * whitelist - forcefully whitelist client
+ *
+ * @cldev: me clients device
+ */
+static void whitelist(struct mei_cl_device *cldev)
+{
+	dev_dbg(&cldev->dev, "running hook %s\n", __func__);
+
+	cldev->do_match = 1;
+}
+
 #define OSTYPE_LINUX    2
 struct mei_os_ver {
 	__le16 build;
@@ -473,6 +488,7 @@ static struct mei_fixup {
 	MEI_FIXUP(MEI_UUID_NFC_HCI, mei_nfc),
 	MEI_FIXUP(MEI_UUID_WD, mei_wd),
 	MEI_FIXUP(MEI_UUID_MKHIF_FIX, mei_mkhi_fix),
+	MEI_FIXUP(MEI_UUID_HDCP, whitelist),
 };
 
 /**
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#22 lore raw

PATCH v7 22/39 mei: bus: export to_mei_cl_device for mei client device drivers

In reply to Ramalingam C

From: Tomas Winkler <[email protected]>

Export to_mei_cl_device macro, it is needed also in mei client drivers.

---
 drivers/misc/mei/bus.c     | 1 -
 include/linux/mei_cl_bus.h | 2 ++
 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/misc/mei/bus.c +0 -1
index fc3872fe7b25..e5456faf00e6 100644
@@ -28,7 +28,6 @@
 #include "client.h"
 
 #define to_mei_cl_driver(d) container_of(d, struct mei_cl_driver, driver)
-#define to_mei_cl_device(d) container_of(d, struct mei_cl_device, dev)
 
 /**
  * __mei_cl_send - internal client send (write)
include/linux/mei_cl_bus.h +2 -0
index 7fde40e17c8b..03b6ba2a63f8 100644
@@ -55,6 +55,8 @@ struct mei_cl_device {
 	void *priv_data;
 };
 
+#define to_mei_cl_device(d) container_of(d, struct mei_cl_device, dev)
+
 struct mei_cl_driver {
 	struct device_driver driver;
 	const char *name;
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#23 lore raw

PATCH v7 23/39 misc/mei/hdcp: Client driver for HDCP application

In reply to Ramalingam C

ME FW is contributes a vital role in HDCP2.2 authentication. HDCP2.2 driver needs to communicate to ME FW for each step of the HDCP2.2 authentication.

ME FW prepare and HDCP2.2 authentication parameters and encrypt them as per spec. With such parameter Driver prepares HDCP2.2 auth messages and communicate with HDCP2.2 sink.

Similarly HDCP2. sink's response is shared with ME FW for decrypt and verification.

Once All the steps of HDCP2.2 authentications are complete on driver's request ME FW will configure the port as authenticated and supply the HDCP keys to the Gen HW for encryption.

Only after this stage HDCP2.2 driver can start the HDCP2.2 encryption for a port.

ME FW is interfaced to kernel through MEI Bus Driver. To obtain the HDCP2.2 services from the ME FW through MEI Bus driver MEI Client Driver is developed.

With this change MEI_HDCP drivers selected by I915 by default. In case if we want to exclude the mei_hdcp compilation, we need to introduce a new config called HDCP2.2. Using such CONFIG var we could control the compilation of the HDCP2.2 code in I915 and also the compilation of the MEI_HDCP.

v2:
hdcp files are moved to drivers/misc/mei/hdcp/ [Tomas]
v3:
Squashed the Kbuild support [Tomas]
UUID renamed and Module License is modified [Tomas] drv_data is set to null at remove [Tomas]
v4:
Module name is changed to "MEI HDCP"
I915 Selects the MEI_HDCP
v5:
No Change.
v6:
No Change.
v7:
Remove redundant text from the License header Fix malformed licence
Removed the drv_data resetting.

---
 drivers/misc/mei/Kconfig         |  7 ++++++
 drivers/misc/mei/Makefile        |  2 ++
 drivers/misc/mei/hdcp/Makefile   |  7 ++++++
 drivers/misc/mei/hdcp/mei_hdcp.c | 54 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 70 insertions(+)
 create mode 100644 drivers/misc/mei/hdcp/Makefile
 create mode 100644 drivers/misc/mei/hdcp/mei_hdcp.c
drivers/misc/mei/Kconfig +7 -0
index c49e1d2269af..9c518b7f0011 100644
@@ -43,3 +43,10 @@ config INTEL_MEI_TXE
 
 	  Supported SoCs:
 	  Intel Bay Trail
+
+config INTEL_MEI_HDCP
+	tristate "Intel HDCP2.2 services of ME Interface"
+	select INTEL_MEI_ME
+	depends on DRM_I915
+	help
+	  MEI Support for HDCP2.2 Services on Intel SoCs.
drivers/misc/mei/Makefile +2 -0
index cd6825afa8e1..e64d1212fb85 100644
@@ -23,3 +23,5 @@ mei-txe-objs += hw-txe.o
 
 mei-$(CONFIG_EVENT_TRACING) += mei-trace.o
 CFLAGS_mei-trace.o = -I$(src)
+
+obj-$(CONFIG_INTEL_MEI_HDCP) += hdcp/
drivers/misc/mei/hdcp/Makefile new file +7 -0
new file mode 100644
index 000000000000..c1a86dd9782b
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+#
+# Copyright (c) 2017-2018, Intel Corporation.
+#
+# Makefile - HDCP client driver for Intel MEI Bus Driver.
+
+obj-$(CONFIG_INTEL_MEI_HDCP) += mei_hdcp.o
drivers/misc/mei/hdcp/mei_hdcp.c new file +54 -0

54 lines not on this page · raw message

Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#24 lore raw

PATCH v7 24/39 misc/mei/hdcp: Define ME FW interface for HDCP2.2

In reply to Ramalingam C

Defines the HDCP specific ME FW interfaces such as Request CMDs, payload structure for CMDs and their response status codes.

This patch defines payload size(Excluding the Header)for each WIRED HDCP2.2 CMDs.

v2:
Rebased.
v3:
Extra comments are removed.
v4:
%s/\/\*\*/\/\*
v5:
Extra lines are removed.
v6:
No change.
v7:
Remove redundant text from the License header
%s/LPRIME_HALF/V_PRIME_HALF
%s/uintxx_t/uxx

---
 drivers/misc/mei/hdcp/mei_hdcp.h | 366 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 366 insertions(+)
 create mode 100644 drivers/misc/mei/hdcp/mei_hdcp.h
drivers/misc/mei/hdcp/mei_hdcp.h new file +366 -0
new file mode 100644
index 000000000000..02013893397c
@@ -0,0 +1,366 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright © 2017-2018 Intel Corporation
+ *
+ * Authors:
+ * Ramalingam C <[email protected]>
+ */
+
+#ifndef __MEI_HDCP_H__
+#define __MEI_HDCP_H__
+
+#include <drm/drm_hdcp.h>
+
+/* me_hdcp_status: Enumeration of all HDCP Status Codes */
+enum me_hdcp_status {
+	ME_HDCP_STATUS_SUCCESS			= 0x0000,
+
+	/* WiDi Generic Status Codes */
+	ME_HDCP_STATUS_INTERNAL_ERROR		= 0x1000,
+	ME_HDCP_STATUS_UNKNOWN_ERROR		= 0x1001,
+	ME_HDCP_STATUS_INCORRECT_API_VERSION	= 0x1002,
+	ME_HDCP_STATUS_INVALID_FUNCTION		= 0x1003,
+	ME_HDCP_STATUS_INVALID_BUFFER_LENGTH	= 0x1004,
+	ME_HDCP_STATUS_INVALID_PARAMS		= 0x1005,
+	ME_HDCP_STATUS_AUTHENTICATION_FAILED	= 0x1006,
+
+	/* WiDi Status Codes */
+	ME_HDCP_INVALID_SESSION_STATE		= 0x6000,
+	ME_HDCP_SRM_FRAGMENT_UNEXPECTED		= 0x6001,
+	ME_HDCP_SRM_INVALID_LENGTH		= 0x6002,
+	ME_HDCP_SRM_FRAGMENT_OFFSET_INVALID	= 0x6003,
+	ME_HDCP_SRM_VERIFICATION_FAILED		= 0x6004,
+	ME_HDCP_SRM_VERSION_TOO_OLD		= 0x6005,
+	ME_HDCP_RX_CERT_VERIFICATION_FAILED	= 0x6006,
+	ME_HDCP_RX_REVOKED			= 0x6007,
+	ME_HDCP_H_VERIFICATION_FAILED		= 0x6008,
+	ME_HDCP_REPEATER_CHECK_UNEXPECTED	= 0x6009,
+	ME_HDCP_TOPOLOGY_MAX_EXCEEDED		= 0x600A,
+	ME_HDCP_V_VERIFICATION_FAILED		= 0x600B,
+	ME_HDCP_L_VERIFICATION_FAILED		= 0x600C,
+	ME_HDCP_STREAM_KEY_ALLOC_FAILED		= 0x600D,
+	ME_HDCP_BASE_KEY_RESET_FAILED		= 0x600E,
+	ME_HDCP_NONCE_GENERATION_FAILED		= 0x600F,
+	ME_HDCP_STATUS_INVALID_E_KEY_STATE	= 0x6010,
+	ME_HDCP_STATUS_INVALID_CS_ICV		= 0x6011,
+	ME_HDCP_STATUS_INVALID_KB_KEY_STATE	= 0x6012,
+	ME_HDCP_STATUS_INVALID_PAVP_MODE_ICV	= 0x6013,
+	ME_HDCP_STATUS_INVALID_PAVP_MODE	= 0x6014,
+	ME_HDCP_STATUS_LC_MAX_ATTEMPTS		= 0x6015,
+
+	/* New status for HDCP 2.1 */
+	ME_HDCP_STATUS_MISMATCH_IN_M		= 0x6016,
+
+	/* New status code for HDCP 2.2 Rx */
+	ME_HDCP_STATUS_RX_PROV_NOT_ALLOWED	= 0x6017,
+	ME_HDCP_STATUS_RX_PROV_WRONG_SUBJECT	= 0x6018,
+	ME_HDCP_RX_NEEDS_PROVISIONING		= 0x6019,
+	ME_HDCP_BKSV_ICV_AUTH_FAILED		= 0x6020,
+	ME_HDCP_STATUS_INVALID_STREAM_ID	= 0x6021,
+	ME_HDCP_STATUS_CHAIN_NOT_INITIALIZED	= 0x6022,
+	ME_HDCP_FAIL_NOT_EXPECTED		= 0x6023,
+	ME_HDCP_FAIL_HDCP_OFF			= 0x6024,
+	ME_HDCP_FAIL_INVALID_PAVP_MEMORY_MODE	= 0x6025,
+	ME_HDCP_FAIL_AES_ECB_FAILURE		= 0x6026,
+	ME_HDCP_FEATURE_NOT_SUPPORTED		= 0x6027,
+	ME_HDCP_DMA_READ_ERROR			= 0x6028,
+	ME_HDCP_DMA_WRITE_ERROR			= 0x6029,
+	ME_HDCP_FAIL_INVALID_PACKET_SIZE	= 0x6030,
+	ME_HDCP_H264_PARSING_ERROR		= 0x6031,
+	ME_HDCP_HDCP2_ERRATA_VIDEO_VIOLATION	= 0x6032,
+	ME_HDCP_HDCP2_ERRATA_AUDIO_VIOLATION	= 0x6033,
+	ME_HDCP_TX_ACTIVE_ERROR			= 0x6034,
+	ME_HDCP_MODE_CHANGE_ERROR		= 0x6035,
+	ME_HDCP_STREAM_TYPE_ERROR		= 0x6036,
+	ME_HDCP_STREAM_MANAGE_NOT_POSSIBLE	= 0x6037,
+
+	ME_HDCP_STATUS_PORT_INVALID_COMMAND	= 0x6038,
+	ME_HDCP_STATUS_UNSUPPORTED_PROTOCOL	= 0x6039,
+	ME_HDCP_STATUS_INVALID_PORT_INDEX	= 0x603a,
+	ME_HDCP_STATUS_TX_AUTH_NEEDED		= 0x603b,
+	ME_HDCP_STATUS_NOT_INTEGRATED_PORT	= 0x603c,
+	ME_HDCP_STATUS_SESSION_MAX_REACHED	= 0x603d,
+
+	/* hdcp capable bit is not set in rx_caps(error is unique to DP) */
+	ME_HDCP_STATUS_NOT_HDCP_CAPABLE		= 0x6041,
+
+	ME_HDCP_STATUS_INVALID_STREAM_COUNT	= 0x6042,
+};
+
+#define HDCP_API_VERSION				0x00010000
+
+#define HDCP_M_LEN					16
+#define HDCP_KH_LEN					16
+
+/* Payload Buffer size(Excluding Header) for CMDs and corresponding response */
+/* Wired_Tx_AKE  */
+#define	WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN	(4 + 1)
+#define	WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_OUT	(4 + 8 + 3)
+
+#define	WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN	(4 + 522 + 8 + 3)
+#define	WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_MIN_OUT	(4 + 1 + 3 + 16 + 16)
+#define	WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_MAX_OUT	(4 + 1 + 3 + 128)
+
+#define	WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN		(4 + 32)
+#define	WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_OUT		(4)
+
+#define	WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN		(4 + 16)
+#define	WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_OUT		(4)
+
+#define	WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN		(4)
+#define	WIRED_CMD_BUF_LEN_CLOSE_SESSION_OUT		(4)
+
+/* Wired_Tx_LC */
+#define	WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN	(4)
+#define	WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_OUT	(4 + 8)
+
+#define	WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN		(4 + 32)
+#define	WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_OUT		(4)
+
+/* Wired_Tx_SKE */
+#define	WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN		(4)
+#define	WIRED_CMD_BUF_LEN_GET_SESSION_KEY_OUT		(4 + 16 + 8)
+
+/* Wired_Tx_SKE */
+#define	WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN		(4 + 1)
+#define	WIRED_CMD_BUF_LEN_ENABLE_AUTH_OUT		(4)
+
+/* Wired_Tx_Repeater */
+#define	WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN		(4 + 2 + 3 + 16 + 155)
+#define	WIRED_CMD_BUF_LEN_VERIFY_REPEATER_OUT		(4 + 1 + 16)
+
+#define	WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_MIN_IN	(4 + 3 + \
+								32 + 2 + 2)
+
+#define	WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_OUT		(4)
+
+/* hdcp_command_id: Enumeration of all WIRED HDCP Command IDs */
+enum hdcp_command_id {
+	_WIDI_COMMAND_BASE		= 0x00030000,
+	WIDI_INITIATE_HDCP2_SESSION	= _WIDI_COMMAND_BASE,
+	HDCP_GET_SRM_STATUS,
+	HDCP_SEND_SRM_FRAGMENT,
+
+	/* The wired HDCP Tx commands */
+	_WIRED_COMMAND_BASE		= 0x00031000,
+	WIRED_INITIATE_HDCP2_SESSION	= _WIRED_COMMAND_BASE,
+	WIRED_VERIFY_RECEIVER_CERT,
+	WIRED_AKE_SEND_HPRIME,
+	WIRED_AKE_SEND_PAIRING_INFO,
+	WIRED_INIT_LOCALITY_CHECK,
+	WIRED_VALIDATE_LOCALITY,
+	WIRED_GET_SESSION_KEY,
+	WIRED_ENABLE_AUTH,
+	WIRED_VERIFY_REPEATER,
+	WIRED_REPEATER_AUTH_STREAM_REQ,
+	WIRED_CLOSE_SESSION,
+
+	_WIRED_COMMANDS_COUNT,
+};
+
+union encrypted_buff {
+	u8		e_kpub_km[HDCP_2_2_E_KPUB_KM_LEN];
+	u8		e_kh_km_m[HDCP_2_2_E_KH_KM_M_LEN];
+	struct {
+		u8	e_kh_km[HDCP_KH_LEN];
+		u8	m[HDCP_M_LEN];
+	} __packed;
+};
+
+/* HDCP HECI message header. All header values are little endian. */
+struct hdcp_cmd_header {
+	u32			api_version;
+	u32			command_id;
+	enum me_hdcp_status	status;
+	/* Length of the HECI message (excluding the header) */
+	u32			buffer_len;
+} __packed;
+
+/* Empty command request or response. No data follows the header. */
+struct hdcp_cmd_no_data {
+	struct hdcp_cmd_header header;
+} __packed;
+
+/* Uniquely identifies the hdcp port being addressed for a given command. */
+struct hdcp_port_id {
+	u8	integrated_port_type;
+	u8	physical_port;
+	u16	reserved;
+} __packed;
+
+/*
+ * Data structures for integrated wired HDCP2 Tx in
+ * support of the AKE protocol
+ */
+/* HECI struct for integrated wired HDCP Tx session initiation. */
+struct wired_cmd_initiate_hdcp2_session_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			protocol; /* for HDMI vs DP */
+} __packed;
+
+struct wired_cmd_initiate_hdcp2_session_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			r_tx[HDCP_2_2_RTX_LEN];
+	struct hdcp2_tx_caps	tx_caps;
+} __packed;
+
+/* HECI struct for ending an integrated wired HDCP Tx session. */
+struct wired_cmd_close_session_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+struct wired_cmd_close_session_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+/* HECI struct for integrated wired HDCP Tx Rx Cert verification. */
+struct wired_cmd_verify_receiver_cert_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	struct hdcp2_cert_rx	cert_rx;
+	u8			r_rx[HDCP_2_2_RRX_LEN];
+	u8			rx_caps[HDCP_2_2_RXCAPS_LEN];
+} __packed;
+
+struct wired_cmd_verify_receiver_cert_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			km_stored;
+	u8			reserved[3];
+	union encrypted_buff	ekm_buff;
+} __packed;
+
+/* HECI struct for verification of Rx's Hprime in a HDCP Tx session */
+struct wired_cmd_ake_send_hprime_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			h_prime[HDCP_2_2_H_PRIME_LEN];
+} __packed;
+
+struct wired_cmd_ake_send_hprime_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+/*
+ * HECI struct for sending in AKE pairing data generated by the Rx in an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_ake_send_pairing_info_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			e_kh_km[HDCP_2_2_E_KH_KM_LEN];
+} __packed;
+
+struct wired_cmd_ake_send_pairing_info_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+/* Data structures for integrated wired HDCP2 Tx in support of the LC protocol*/
+/*
+ * HECI struct for initiating locality check with an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_init_locality_check_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+struct wired_cmd_init_locality_check_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			r_n[HDCP_2_2_RN_LEN];
+} __packed;
+
+/*
+ * HECI struct for validating an Rx's LPrime value in an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_validate_locality_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			l_prime[HDCP_2_2_L_PRIME_LEN];
+} __packed;
+
+struct wired_cmd_validate_locality_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+/*
+ * Data structures for integrated wired HDCP2 Tx in support of the
+ * SKE protocol
+ */
+/* HECI struct for creating session key */
+struct wired_cmd_get_session_key_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+struct wired_cmd_get_session_key_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			e_dkey_ks[HDCP_2_2_E_DKEY_KS_LEN];
+	u8			r_iv[HDCP_2_2_RIV_LEN];
+} __packed;
+
+/* HECI struct for the Tx enable authentication command */
+struct wired_cmd_enable_auth_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			stream_type;
+} __packed;
+
+struct wired_cmd_enable_auth_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+/*
+ * Data structures for integrated wired HDCP2 Tx in support of
+ * the repeater protocols
+ */
+/*
+ * HECI struct for verifying the downstream repeater's HDCP topology in an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_verify_repeater_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			rx_info[HDCP_2_2_RXINFO_LEN];
+	u8			seq_num_v[HDCP_2_2_SEQ_NUM_LEN];
+	u8			v_prime[HDCP_2_2_V_PRIME_HALF_LEN];
+	u8			receiver_ids[HDCP_2_2_RECEIVER_IDS_MAX_LEN];
+} __packed;
+
+struct wired_cmd_verify_repeater_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			content_type_supported;
+	u8			v[HDCP_2_2_V_PRIME_HALF_LEN];
+} __packed;
+
+/*
+ * HECI struct in support of stream management in an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_repeater_auth_stream_req_in {
+	struct hdcp_cmd_header		header;
+	struct hdcp_port_id		port;
+	u8				seq_num_m[HDCP_2_2_SEQ_NUM_LEN];
+	u8				m_prime[HDCP_2_2_MPRIME_LEN];
+	u16				k;
+	struct hdcp2_streamid_type	streams[1];
+} __packed;
+
+struct wired_cmd_repeater_auth_stream_req_out {
+	struct hdcp_cmd_header		header;
+	struct hdcp_port_id		port;
+} __packed;
+
+#endif /* __MEI_HDCP_H__ */
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#25 lore raw

PATCH v7 25/39 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session

In reply to Ramalingam C

Request ME FW to start the HDCP2.2 session for an intel port. Prepares payloads for command WIRED_INITIATE_HDCP2_SESSION and sends to ME FW.

On Success, ME FW will start a HDCP2.2 session for the port and provides the content for HDCP2.2 AKE_Init message.

v2:
Rebased.
v3:
cldev is add as a separate parameter [Tomas] Redundant comment and typecast are removed [Tomas]
v4:
%zd is used for size [Alexander]
%s/return -1/return -EIO [Alexander] Spellings in commit msg is fixed [Uma]
v5:
Rebased.
v6:
No change.
v7:
Collected the rb-ed by.
Realigning the patches in the series.

---
 drivers/misc/mei/hdcp/mei_hdcp.c | 85 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)
drivers/misc/mei/hdcp/mei_hdcp.c +85 -0
index d4067d17f382..0c85d4782949 100644
@@ -12,6 +12,91 @@
 #include <linux/slab.h>
 #include <linux/uuid.h>
 #include <linux/mei_cl_bus.h>
+#include <linux/mei_hdcp.h>
+#include <drm/drm_connector.h>
+#include <drm/i915_component.h>
+
+#include "mei_hdcp.h"
+
+/*
+ * mei_initiate_hdcp2_session:
+ *	Function to start a Wired HDCP2.2 Tx Session with ME FW
+ *
+ * cldev		: Pointer for mei client device
+ * data			: Intel HW specific Data
+ * ake_data		: ptr to store AKE_Init
+ *
+ * Returns 0 on Success, <0 on Failure.
+ */
+static int mei_initiate_hdcp2_session(struct mei_cl_device *cldev,
+				      struct mei_hdcp_data *data,
+				      struct hdcp2_ake_init *ake_data)
+{
+	struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } };
+	struct wired_cmd_initiate_hdcp2_session_out
+						session_init_out = { { 0 } };
+	struct device *dev;
+	ssize_t byte;
+
+	if (!data || !ake_data)
+		return -EINVAL;
+
+	dev = &cldev->dev;
+
+	session_init_in.header.api_version = HDCP_API_VERSION;
+	session_init_in.header.command_id = WIRED_INITIATE_HDCP2_SESSION;
+	session_init_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	session_init_in.header.buffer_len =
+				WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN;
+
+	session_init_in.port.integrated_port_type = data->port_type;
+	session_init_in.port.physical_port = data->port;
+	session_init_in.protocol = (uint8_t)data->protocol;
+
+	byte = mei_cldev_send(cldev, (u8 *)&session_init_in,
+			      sizeof(session_init_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&session_init_out,
+			      sizeof(session_init_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (session_init_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+			WIRED_INITIATE_HDCP2_SESSION,
+			session_init_out.header.status);
+		return -EIO;
+	}
+
+	ake_data->msg_id = HDCP_2_2_AKE_INIT;
+	ake_data->tx_caps = session_init_out.tx_caps;
+	memcpy(ake_data->r_tx, session_init_out.r_tx,
+	       sizeof(session_init_out.r_tx));
+
+	return 0;
+}
+
+static __attribute__((unused))
+struct i915_hdcp_component_ops mei_hdcp_ops = {
+	.owner					= THIS_MODULE,
+	.initiate_hdcp2_session			= mei_initiate_hdcp2_session,
+	.verify_receiver_cert_prepare_km	= NULL,
+	.verify_hprime				= NULL,
+	.store_pairing_info			= NULL,
+	.initiate_locality_check		= NULL,
+	.verify_lprime				= NULL,
+	.get_session_key			= NULL,
+	.repeater_check_flow_prepare_ack	= NULL,
+	.verify_mprime				= NULL,
+	.enable_hdcp_authentication		= NULL,
+	.close_hdcp_session			= NULL,
+};
 
 static int mei_hdcp_probe(struct mei_cl_device *cldev,
 			  const struct mei_cl_device_id *id)
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#26 lore raw

PATCH v7 26/39 misc/mei/hdcp: Verify Receiver Cert and prepare km

In reply to Ramalingam C

Requests for verification for receiver certification and also the preparation for next AKE auth message with km.

On Success ME FW validate the HDCP2.2 receivers certificate and do the revocation check on the receiver ID. AKE_Stored_Km will be prepared if the receiver is already paired, else AKE_No_Stored_Km will be prepared.

Here AKE_Stored_Km and AKE_No_Stored_Km are HDCP2.2 protocol msgs.

v2:
Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd is used for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
v5:
Rebased.
v6:
No change.
v7:
Collected the Rb-ed by.
Rebasing.

---
 drivers/misc/mei/hdcp/mei_hdcp.c | 85 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 84 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +84 -1
index 0c85d4782949..d9b457074d3b 100644
@@ -82,11 +82,94 @@ static int mei_initiate_hdcp2_session(struct mei_cl_device *cldev,
 	return 0;
 }
 
+/*
+ * mei_verify_receiver_cert_prepare_km:
+ *	Function to verify the Receiver Certificate AKE_Send_Cert
+ *	and prepare AKE_Stored_Km or AKE_No_Stored_Km
+ *
+ * cldev		: Pointer for mei client device
+ * data			: Intel HW specific Data
+ * rx_cert		: Pointer for AKE_Send_Cert
+ * km_stored		: Pointer for pairing status flag
+ * ek_pub_km		: Pointer for output msg
+ * msg_sz		: Pointer for size of AKE_XXXXX_Km
+ *
+ * Returns 0 on Success, <0 on Failure
+ */
+static int
+mei_verify_receiver_cert_prepare_km(struct mei_cl_device *cldev,
+				    struct mei_hdcp_data *data,
+				    struct hdcp2_ake_send_cert *rx_cert,
+				    bool *km_stored,
+				    struct hdcp2_ake_no_stored_km *ek_pub_km,
+				    size_t *msg_sz)
+{
+	struct wired_cmd_verify_receiver_cert_in verify_rxcert_in = { { 0 } };
+	struct wired_cmd_verify_receiver_cert_out verify_rxcert_out = { { 0 } };
+	struct device *dev;
+	ssize_t byte;
+
+	if (!data || !rx_cert || !km_stored || !ek_pub_km || !msg_sz)
+		return -EINVAL;
+
+	dev = &cldev->dev;
+
+	verify_rxcert_in.header.api_version = HDCP_API_VERSION;
+	verify_rxcert_in.header.command_id = WIRED_VERIFY_RECEIVER_CERT;
+	verify_rxcert_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	verify_rxcert_in.header.buffer_len =
+				WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN;
+
+	verify_rxcert_in.port.integrated_port_type = data->port_type;
+	verify_rxcert_in.port.physical_port = data->port;
+
+	memcpy(&verify_rxcert_in.cert_rx, &rx_cert->cert_rx,
+	       sizeof(rx_cert->cert_rx));
+	memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, sizeof(rx_cert->r_rx));
+	memcpy(verify_rxcert_in.rx_caps, rx_cert->rx_caps, HDCP_2_2_RXCAPS_LEN);
+
+	byte = mei_cldev_send(cldev, (u8 *)&verify_rxcert_in,
+			      sizeof(verify_rxcert_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed: %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&verify_rxcert_out,
+			      sizeof(verify_rxcert_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed: %zd\n", byte);
+		return byte;
+	}
+
+	if (verify_rxcert_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+			WIRED_VERIFY_RECEIVER_CERT,
+			verify_rxcert_out.header.status);
+		return -EIO;
+	}
+
+	*km_stored = verify_rxcert_out.km_stored;
+	if (verify_rxcert_out.km_stored) {
+		ek_pub_km->msg_id = HDCP_2_2_AKE_STORED_KM;
+		*msg_sz = sizeof(struct hdcp2_ake_stored_km);
+	} else {
+		ek_pub_km->msg_id = HDCP_2_2_AKE_NO_STORED_KM;
+		*msg_sz = sizeof(struct hdcp2_ake_no_stored_km);
+	}
+
+	memcpy(ek_pub_km->e_kpub_km, &verify_rxcert_out.ekm_buff,
+	       sizeof(verify_rxcert_out.ekm_buff));
+
+	return 0;
+}
+
 static __attribute__((unused))
 struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.owner					= THIS_MODULE,
 	.initiate_hdcp2_session			= mei_initiate_hdcp2_session,
-	.verify_receiver_cert_prepare_km	= NULL,
+	.verify_receiver_cert_prepare_km	=
+					mei_verify_receiver_cert_prepare_km,
 	.verify_hprime				= NULL,
 	.store_pairing_info			= NULL,
 	.initiate_locality_check		= NULL,
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#27 lore raw

PATCH v7 27/39 misc/mei/hdcp: Verify H_prime

In reply to Ramalingam C

Requests for the verification of AKE_Send_H_prime.

ME will calculate the H and comparing it with received H_Prime. The result will be returned as status.

Here AKE_Send_H_prime is a HDCP2.2 Authentication msg.

v2:
Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Styles and typos fixed [Uma]
v5:
Rebased.
v6:
No change.
v7:
Collected the Rb-ed by.
Rebasing.

---
 drivers/misc/mei/hdcp/mei_hdcp.c | 61 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +60 -1
index d9b457074d3b..28e5a86b29a5 100644
@@ -164,13 +164,72 @@ mei_verify_receiver_cert_prepare_km(struct mei_cl_device *cldev,
 	return 0;
 }
 
+/*
+ * mei_verify_hprime:
+ *	Function to verify AKE_Send_H_prime received, through ME FW.
+ *
+ * cldev		: Pointer for mei client device
+ * data			: Intel HW specific Data
+ * rx_hprime		: Pointer for AKE_Send_H_prime
+ * hprime_sz		: Input buffer size
+ *
+ * Returns 0 on Success, <0 on Failure
+ */
+static int mei_verify_hprime(struct mei_cl_device *cldev,
+			     struct mei_hdcp_data *data,
+			     struct hdcp2_ake_send_hprime *rx_hprime)
+{
+	struct wired_cmd_ake_send_hprime_in send_hprime_in = { { 0 } };
+	struct wired_cmd_ake_send_hprime_out send_hprime_out = { { 0 } };
+	struct device *dev;
+	ssize_t byte;
+
+	if (!data || !rx_hprime)
+		return -EINVAL;
+
+	dev = &cldev->dev;
+
+	send_hprime_in.header.api_version = HDCP_API_VERSION;
+	send_hprime_in.header.command_id = WIRED_AKE_SEND_HPRIME;
+	send_hprime_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	send_hprime_in.header.buffer_len = WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN;
+
+	send_hprime_in.port.integrated_port_type = data->port_type;
+	send_hprime_in.port.physical_port = data->port;
+
+	memcpy(send_hprime_in.h_prime, rx_hprime->h_prime,
+	       sizeof(rx_hprime->h_prime));
+
+	byte = mei_cldev_send(cldev, (u8 *)&send_hprime_in,
+			      sizeof(send_hprime_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&send_hprime_out,
+			      sizeof(send_hprime_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (send_hprime_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+			WIRED_AKE_SEND_HPRIME, send_hprime_out.header.status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
 static __attribute__((unused))
 struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.owner					= THIS_MODULE,
 	.initiate_hdcp2_session			= mei_initiate_hdcp2_session,
 	.verify_receiver_cert_prepare_km	=
 					mei_verify_receiver_cert_prepare_km,
-	.verify_hprime				= NULL,
+	.verify_hprime				= mei_verify_hprime,
 	.store_pairing_info			= NULL,
 	.initiate_locality_check		= NULL,
 	.verify_lprime				= NULL,
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#28 lore raw

PATCH v7 28/39 misc/mei/hdcp: Store the HDCP Pairing info

In reply to Ramalingam C

Provides Pairing info to ME to store.

Pairing is a process to fast track the subsequent authentication with the same HDCP sink.

On Success, received HDCP pairing info is stored in non-volatile memory of ME.

v2:
Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5:
Rebased.
v6:
No change.
v7:
Collected the Rb-ed by.
Rebasing.

---
 drivers/misc/mei/hdcp/mei_hdcp.c | 63 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 62 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +62 -1
index 28e5a86b29a5..0dd01ce46833 100644
@@ -223,6 +223,67 @@ static int mei_verify_hprime(struct mei_cl_device *cldev,
 	return 0;
 }
 
+/*
+ * mei_store_pairing_info:
+ *	Function to store pairing info received from panel
+ *
+ * cldev		: Pointer for mei client device
+ * data			: Intel HW specific Data
+ * pairing_info		: Pointer for AKE_Send_Pairing_Info
+ *
+ * Returns 0 on Success, <0 on Failure
+ */
+static int
+mei_store_pairing_info(struct mei_cl_device *cldev,
+		       struct mei_hdcp_data *data,
+		       struct hdcp2_ake_send_pairing_info *pairing_info)
+{
+	struct wired_cmd_ake_send_pairing_info_in pairing_info_in = { { 0 } };
+	struct wired_cmd_ake_send_pairing_info_out pairing_info_out = { { 0 } };
+	struct device *dev;
+	ssize_t byte;
+
+	if (!data || !pairing_info)
+		return -EINVAL;
+
+	dev = &cldev->dev;
+
+	pairing_info_in.header.api_version = HDCP_API_VERSION;
+	pairing_info_in.header.command_id = WIRED_AKE_SEND_PAIRING_INFO;
+	pairing_info_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	pairing_info_in.header.buffer_len =
+					WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN;
+
+	pairing_info_in.port.integrated_port_type = data->port_type;
+	pairing_info_in.port.physical_port = data->port;
+
+	memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km,
+	       sizeof(pairing_info_in.e_kh_km));
+
+	byte = mei_cldev_send(cldev, (u8 *)&pairing_info_in,
+			      sizeof(pairing_info_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&pairing_info_out,
+			      sizeof(pairing_info_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (pairing_info_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X failed. Status: 0x%X\n",
+			WIRED_AKE_SEND_PAIRING_INFO,
+			pairing_info_out.header.status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
 static __attribute__((unused))
 struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.owner					= THIS_MODULE,
@@ -230,7 +291,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.verify_receiver_cert_prepare_km	=
 					mei_verify_receiver_cert_prepare_km,
 	.verify_hprime				= mei_verify_hprime,
-	.store_pairing_info			= NULL,
+	.store_pairing_info			= mei_store_pairing_info,
 	.initiate_locality_check		= NULL,
 	.verify_lprime				= NULL,
 	.get_session_key			= NULL,
Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#29 lore raw

PATCH v7 29/39 misc/mei/hdcp: Initiate Locality check

In reply to Ramalingam C

Requests ME to start the second stage of HDCP2.2 authentication, called Locality Check.

On Success, ME FW will provide LC_Init message to send to hdcp sink.

v2:
Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd used for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5:
Rebased.
v6:
No change.
v7:
Collected the Rb-ed by.
Rebasing.

---
 drivers/misc/mei/hdcp/mei_hdcp.c | 58 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +57 -1
index 0dd01ce46833..ab1aed39d5a4 100644
@@ -284,6 +284,62 @@ mei_store_pairing_info(struct mei_cl_device *cldev,
 	return 0;
 }
 
+/*
+ * mei_initiate_locality_check:
+ *	Function to prepare LC_Init.
+ *
+ * cldev		: Pointer for mei client device
+ * data			: Intel HW specific Data
+ * hdcp2_lc_init	: Pointer for storing LC_Init
+ *
+ * Returns 0 on Success, <0 on Failure
+ */
+static int mei_initiate_locality_check(struct mei_cl_device *cldev,
+				       struct mei_hdcp_data *data,
+				       struct hdcp2_lc_init *lc_init_data)
+{
+	struct wired_cmd_init_locality_check_in lc_init_in = { { 0 } };
+	struct wired_cmd_init_locality_check_out lc_init_out = { { 0 } };
+	struct device *dev;
+	ssize_t byte;
+
+	if (!data || !lc_init_data)
+		return -EINVAL;
+
+	dev = &cldev->dev;
+
+	lc_init_in.header.api_version = HDCP_API_VERSION;
+	lc_init_in.header.command_id = WIRED_INIT_LOCALITY_CHECK;
+	lc_init_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	lc_init_in.header.buffer_len = WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN;
+
+	lc_init_in.port.integrated_port_type = data->port_type;
+	lc_init_in.port.physical_port = data->port;
+
+	byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&lc_init_out, sizeof(lc_init_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (lc_init_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X Failed. status: 0x%X\n",
+			WIRED_INIT_LOCALITY_CHECK, lc_init_out.header.status);
+		return -EIO;
+	}
+
+	lc_init_data->msg_id = HDCP_2_2_LC_INIT;
+	memcpy(lc_init_data->r_n, lc_init_out.r_n, HDCP_2_2_RN_LEN);
+
+	return 0;
+}
+
 static __attribute__((unused))
 struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.owner					= THIS_MODULE,
@@ -292,7 +348,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = {
 					mei_verify_receiver_cert_prepare_km,
 	.verify_hprime				= mei_verify_hprime,
 	.store_pairing_info			= mei_store_pairing_info,
-	.initiate_locality_check		= NULL,
+	.initiate_locality_check		= mei_initiate_locality_check,
 	.verify_lprime				= NULL,
 	.get_session_key			= NULL,
 	.repeater_check_flow_prepare_ack	= NULL,
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#30 lore raw

PATCH v7 30/39 misc/mei/hdcp: Verify L_prime

In reply to Ramalingam C

Request to ME to verify the LPrime received from HDCP sink.

On Success, ME FW will verify the received Lprime by calculating and comparing with L.

This represents the completion of Locality Check.

v2:
Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5:
Rebased.
v6:
No change.
v7:
Collected the Rb-ed by.
Rebasing.

---
 drivers/misc/mei/hdcp/mei_hdcp.c | 62 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 61 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +61 -1
index ab1aed39d5a4..3ae50240c656 100644
@@ -340,6 +340,66 @@ static int mei_initiate_locality_check(struct mei_cl_device *cldev,
 	return 0;
 }
 
+/*
+ * mei_verify_lprime:
+ *	Function to verify lprime.
+ *
+ * cldev		: Pointer for mei client device
+ * data			: Intel HW specific Data
+ * rx_lprime		: Pointer for LC_Send_L_prime
+ *
+ * Returns 0 on Success, <0 on Failure
+ */
+static int mei_verify_lprime(struct mei_cl_device *cldev,
+			     struct mei_hdcp_data *data,
+			     struct hdcp2_lc_send_lprime *rx_lprime)
+{
+	struct wired_cmd_validate_locality_in verify_lprime_in = { { 0 } };
+	struct wired_cmd_validate_locality_out verify_lprime_out = { { 0 } };
+	struct device *dev;
+	ssize_t byte;
+
+	if (!data || !rx_lprime)
+		return -EINVAL;
+
+	dev = &cldev->dev;
+
+	verify_lprime_in.header.api_version = HDCP_API_VERSION;
+	verify_lprime_in.header.command_id = WIRED_VALIDATE_LOCALITY;
+	verify_lprime_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	verify_lprime_in.header.buffer_len =
+					WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN;
+
+	verify_lprime_in.port.integrated_port_type = data->port_type;
+	verify_lprime_in.port.physical_port = data->port;
+
+	memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime,
+	       sizeof(rx_lprime->l_prime));
+
+	byte = mei_cldev_send(cldev, (u8 *)&verify_lprime_in,
+			      sizeof(verify_lprime_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&verify_lprime_out,
+			      sizeof(verify_lprime_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (verify_lprime_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+			WIRED_VALIDATE_LOCALITY,
+			verify_lprime_out.header.status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
 static __attribute__((unused))
 struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.owner					= THIS_MODULE,
@@ -349,7 +409,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.verify_hprime				= mei_verify_hprime,
 	.store_pairing_info			= mei_store_pairing_info,
 	.initiate_locality_check		= mei_initiate_locality_check,
-	.verify_lprime				= NULL,
+	.verify_lprime				= mei_verify_lprime,
 	.get_session_key			= NULL,
 	.repeater_check_flow_prepare_ack	= NULL,
 	.verify_mprime				= NULL,
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#31 lore raw

PATCH v7 31/39 misc/mei/hdcp: Prepare Session Key

In reply to Ramalingam C

Request to ME to prepare the encrypted session key.

On Success, ME provides Encrypted session key. Function populates the HDCP2.2 authentication msg SKE_Send_Eks.

v2:
Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5:
Rebased.
v6:
No change.
v7:
Collected the Rb-ed by.
Rebasing.

---
 drivers/misc/mei/hdcp/mei_hdcp.c | 61 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +60 -1
index 3ae50240c656..59ef9086cce4 100644
@@ -400,6 +400,65 @@ static int mei_verify_lprime(struct mei_cl_device *cldev,
 	return 0;
 }
 
+/*
+ * mei_get_session_key:
+ *	Function to prepare SKE_Send_Eks.
+ *
+ * cldev		: Pointer for mei client device
+ * data			: Intel HW specific Data
+ * ske_data		: Pointer for SKE_Send_Eks.
+ *
+ * Returns 0 on Success, <0 on Failure
+ */
+static int mei_get_session_key(struct mei_cl_device *cldev,
+			       struct mei_hdcp_data *data,
+			       struct hdcp2_ske_send_eks *ske_data)
+{
+	struct wired_cmd_get_session_key_in get_skey_in = { { 0 } };
+	struct wired_cmd_get_session_key_out get_skey_out = { { 0 } };
+	struct device *dev;
+	ssize_t byte;
+
+	if (!data || !ske_data)
+		return -EINVAL;
+
+	dev = &cldev->dev;
+
+	get_skey_in.header.api_version = HDCP_API_VERSION;
+	get_skey_in.header.command_id = WIRED_GET_SESSION_KEY;
+	get_skey_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	get_skey_in.header.buffer_len = WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN;
+
+	get_skey_in.port.integrated_port_type = data->port_type;
+	get_skey_in.port.physical_port = data->port;
+
+	byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&get_skey_out, sizeof(get_skey_out));
+
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (get_skey_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+			WIRED_GET_SESSION_KEY, get_skey_out.header.status);
+		return -EIO;
+	}
+
+	ske_data->msg_id = HDCP_2_2_SKE_SEND_EKS;
+	memcpy(ske_data->e_dkey_ks, get_skey_out.e_dkey_ks,
+	       HDCP_2_2_E_DKEY_KS_LEN);
+	memcpy(ske_data->riv, get_skey_out.r_iv, HDCP_2_2_RIV_LEN);
+
+	return 0;
+}
+
 static __attribute__((unused))
 struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.owner					= THIS_MODULE,
@@ -410,7 +469,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.store_pairing_info			= mei_store_pairing_info,
 	.initiate_locality_check		= mei_initiate_locality_check,
 	.verify_lprime				= mei_verify_lprime,
-	.get_session_key			= NULL,
+	.get_session_key			= mei_get_session_key,
 	.repeater_check_flow_prepare_ack	= NULL,
 	.verify_mprime				= NULL,
 	.enable_hdcp_authentication		= NULL,
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#32 lore raw

PATCH v7 32/39 misc/mei/hdcp: Repeater topology verification and ack

In reply to Ramalingam C

Request ME to verify the downstream topology information received.

ME FW will validate the Repeaters receiver id list and downstream topology.

On Success ME FW will provide the Least Significant 128bits of VPrime, which forms the repeater ack.

v2:
Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style and typos fixed [Uma]
v5:
Rebased.
v6:
No change.
v7:
Rebasing.

---
 drivers/misc/mei/hdcp/mei_hdcp.c | 77 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 76 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +76 -1
index 59ef9086cce4..2911fb6e8ed3 100644
@@ -459,6 +459,80 @@ static int mei_get_session_key(struct mei_cl_device *cldev,
 	return 0;
 }
 
+/*
+ * mei_repeater_check_flow_prepare_ack:
+ *	Function to validate the Downstream topology and prepare rep_ack.
+ *
+ * cldev		: Pointer for mei client device
+ * data			: Intel HW specific Data
+ * rep_topology		: Pointer for Receiver Id List to be validated.
+ * rep_send_ack		: Pointer for repeater ack
+ *
+ * Returns 0 on Success, <0 on Failure
+ */
+static int
+mei_repeater_check_flow_prepare_ack(struct mei_cl_device *cldev,
+				    struct mei_hdcp_data *data,
+				    struct hdcp2_rep_send_receiverid_list
+							*rep_topology,
+				    struct hdcp2_rep_send_ack *rep_send_ack)
+{
+	struct wired_cmd_verify_repeater_in verify_repeater_in = { { 0 } };
+	struct wired_cmd_verify_repeater_out verify_repeater_out = { { 0 } };
+	struct device *dev;
+	ssize_t byte;
+
+	if (!rep_topology || !rep_send_ack || !data)
+		return -EINVAL;
+
+	dev = &cldev->dev;
+
+	verify_repeater_in.header.api_version = HDCP_API_VERSION;
+	verify_repeater_in.header.command_id = WIRED_VERIFY_REPEATER;
+	verify_repeater_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	verify_repeater_in.header.buffer_len =
+					WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN;
+
+	verify_repeater_in.port.integrated_port_type = data->port_type;
+	verify_repeater_in.port.physical_port = data->port;
+
+	memcpy(verify_repeater_in.rx_info, rep_topology->rx_info,
+	       HDCP_2_2_RXINFO_LEN);
+	memcpy(verify_repeater_in.seq_num_v, rep_topology->seq_num_v,
+	       HDCP_2_2_SEQ_NUM_LEN);
+	memcpy(verify_repeater_in.v_prime, rep_topology->v_prime,
+	       HDCP_2_2_V_PRIME_HALF_LEN);
+	memcpy(verify_repeater_in.receiver_ids, rep_topology->receiver_ids,
+	       HDCP_2_2_RECEIVER_IDS_MAX_LEN);
+
+	byte = mei_cldev_send(cldev, (u8 *)&verify_repeater_in,
+			      sizeof(verify_repeater_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&verify_repeater_out,
+			      sizeof(verify_repeater_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (verify_repeater_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+			WIRED_VERIFY_REPEATER,
+			verify_repeater_out.header.status);
+		return -EIO;
+	}
+
+	memcpy(rep_send_ack->v, verify_repeater_out.v,
+	       HDCP_2_2_V_PRIME_HALF_LEN);
+	rep_send_ack->msg_id = HDCP_2_2_REP_SEND_ACK;
+
+	return 0;
+}
+
 static __attribute__((unused))
 struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.owner					= THIS_MODULE,
@@ -470,7 +544,8 @@ struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.initiate_locality_check		= mei_initiate_locality_check,
 	.verify_lprime				= mei_verify_lprime,
 	.get_session_key			= mei_get_session_key,
-	.repeater_check_flow_prepare_ack	= NULL,
+	.repeater_check_flow_prepare_ack	=
+					mei_repeater_check_flow_prepare_ack,
 	.verify_mprime				= NULL,
 	.enable_hdcp_authentication		= NULL,
 	.close_hdcp_session			= NULL,
Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#33 lore raw

PATCH v7 33/39 misc/mei/hdcp: Verify M_prime

In reply to Ramalingam C

Request to ME to verify the M_Prime received from the HDCP sink.

ME FW will calculate the M and compare with M_prime received as part of RepeaterAuth_Stream_Ready, which is HDCP2.2 protocol msg.

On successful completion of this stage, downstream propagation of the stream management info is completed.

v2:
Rebased.
v3:
cldev is passed as first parameter [Tomas] Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander] endianness conversion func is moved to drm_hdcp.h [Uma]
v5:
Rebased.
v6:
No change.
v7:
Collected the Rb-ed by.
Rebasing.

---
 drivers/misc/mei/hdcp/mei_hdcp.c | 70 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 69 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +69 -1
index 2911fb6e8ed3..80282f852819 100644
@@ -533,6 +533,74 @@ mei_repeater_check_flow_prepare_ack(struct mei_cl_device *cldev,
 	return 0;
 }
 
+/*
+ * mei_verify_mprime:
+ *	Function to verify mprime.
+ *
+ * cldev		: Pointer for mei client device
+ * data			: Intel HW specific Data
+ * stream_ready		: pointer for RepeaterAuth_Stream_Ready message.
+ *
+ * Returns 0 on Success, <0 on Failure
+ */
+static int mei_verify_mprime(struct mei_cl_device *cldev,
+			     struct mei_hdcp_data *data,
+			     struct hdcp2_rep_stream_ready *stream_ready)
+{
+	struct wired_cmd_repeater_auth_stream_req_in
+					verify_mprime_in = { { 0 } };
+	struct wired_cmd_repeater_auth_stream_req_out
+					verify_mprime_out = { { 0 } };
+	struct device *dev;
+	ssize_t byte;
+
+	if (!stream_ready || !data)
+		return -EINVAL;
+
+	dev = &cldev->dev;
+
+	verify_mprime_in.header.api_version = HDCP_API_VERSION;
+	verify_mprime_in.header.command_id = WIRED_REPEATER_AUTH_STREAM_REQ;
+	verify_mprime_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	verify_mprime_in.header.buffer_len =
+			WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_MIN_IN;
+
+	verify_mprime_in.port.integrated_port_type = data->port_type;
+	verify_mprime_in.port.physical_port = data->port;
+
+	memcpy(verify_mprime_in.m_prime, stream_ready->m_prime,
+	       HDCP_2_2_MPRIME_LEN);
+	reverse_endianness((u8 *)&verify_mprime_in.seq_num_m,
+			   HDCP_2_2_SEQ_NUM_LEN, (u8 *)&data->seq_num_m);
+	memcpy(verify_mprime_in.streams, data->streams,
+	       (data->k * sizeof(struct hdcp2_streamid_type)));
+
+	verify_mprime_in.k = __swab16(data->k);
+
+	byte = mei_cldev_send(cldev, (u8 *)&verify_mprime_in,
+			      sizeof(verify_mprime_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&verify_mprime_out,
+			      sizeof(verify_mprime_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (verify_mprime_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+			WIRED_REPEATER_AUTH_STREAM_REQ,
+			verify_mprime_out.header.status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
 static __attribute__((unused))
 struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.owner					= THIS_MODULE,
@@ -546,7 +614,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.get_session_key			= mei_get_session_key,
 	.repeater_check_flow_prepare_ack	=
 					mei_repeater_check_flow_prepare_ack,
-	.verify_mprime				= NULL,
+	.verify_mprime				= mei_verify_mprime,
 	.enable_hdcp_authentication		= NULL,
 	.close_hdcp_session			= NULL,
 };
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#34 lore raw

PATCH v7 34/39 misc/mei/hdcp: Enabling the HDCP authentication

In reply to Ramalingam C

Request to ME to configure a port as authenticated.

On Success, ME FW will mark the port as authenticated and provides HDCP cipher with the encryption keys.

Enabling the Authentication can be requested once all stages of HDCP2.2 authentication is completed by interacting with ME FW.

Only after this stage, driver can enable the HDCP encryption for the port, through HW registers.

v2:
Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style and typos fixed [Uma]
v5:
Rebased.
v6:
No change.
v7:
Collected the Rb-ed by.
Rebased.

---
 drivers/misc/mei/hdcp/mei_hdcp.c | 57 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 56 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +56 -1
index 80282f852819..fe46bfa3e8a7 100644
@@ -601,6 +601,60 @@ static int mei_verify_mprime(struct mei_cl_device *cldev,
 	return 0;
 }
 
+/*
+ * mei_enable_hdcp_authentication:
+ *	Function to request ME FW to mark a port as authenticated.
+ *
+ * cldev		: Pointer for mei client device
+ * data		: Intel HW specific Data
+ *
+ * Returns 0 on Success, <0 on Failure
+ */
+static int mei_enable_hdcp_authentication(struct mei_cl_device *cldev,
+					  struct mei_hdcp_data *data)
+{
+	struct wired_cmd_enable_auth_in enable_auth_in = { { 0 } };
+	struct wired_cmd_enable_auth_out enable_auth_out = { { 0 } };
+	struct device *dev;
+	ssize_t byte;
+
+	if (!data)
+		return -EINVAL;
+
+	dev = &cldev->dev;
+
+	enable_auth_in.header.api_version = HDCP_API_VERSION;
+	enable_auth_in.header.command_id = WIRED_ENABLE_AUTH;
+	enable_auth_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	enable_auth_in.header.buffer_len = WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN;
+
+	enable_auth_in.port.integrated_port_type = data->port_type;
+	enable_auth_in.port.physical_port = data->port;
+	enable_auth_in.stream_type = data->streams[0].stream_type;
+
+	byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in,
+			      sizeof(enable_auth_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&enable_auth_out,
+			      sizeof(enable_auth_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (enable_auth_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+			WIRED_ENABLE_AUTH, enable_auth_out.header.status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
 static __attribute__((unused))
 struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.owner					= THIS_MODULE,
@@ -615,7 +669,8 @@ struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.repeater_check_flow_prepare_ack	=
 					mei_repeater_check_flow_prepare_ack,
 	.verify_mprime				= mei_verify_mprime,
-	.enable_hdcp_authentication		= NULL,
+	.enable_hdcp_authentication		=
+					mei_enable_hdcp_authentication,
 	.close_hdcp_session			= NULL,
 };
 
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#35 lore raw

PATCH v7 35/39 misc/mei/hdcp: Closing wired HDCP2.2 Tx Session

In reply to Ramalingam C

Request the ME to terminate the HDCP2.2 session for a port.

On Success, ME FW will mark the intel port as Deauthenticated and terminate the wired HDCP2.2 Tx session started due to the cmd WIRED_INITIATE_HDCP2_SESSION.

v2:
Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style and typos fixed [Uma]
v5:
Extra line is removed.
v6:
No change.
v7:
Collected the Rb-ed by.
Rebased.

---
 drivers/misc/mei/hdcp/mei_hdcp.c | 56 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 55 insertions(+), 1 deletion(-)
drivers/misc/mei/hdcp/mei_hdcp.c +55 -1
index fe46bfa3e8a7..993d46b3eda7 100644
@@ -655,6 +655,60 @@ static int mei_enable_hdcp_authentication(struct mei_cl_device *cldev,
 	return 0;
 }
 
+/*
+ * mei_close_hdcp_session:
+ *	Function to close the Wired HDCP Tx session of ME FW.
+ *	This also disables the authenticated state of the port.
+ *
+ * data			: Intel HW specific Data
+ *
+ * Returns 0 on Success, <0 on Failure
+ */
+static int mei_close_hdcp_session(struct mei_cl_device *cldev,
+				  struct mei_hdcp_data *data)
+{
+	struct wired_cmd_close_session_in session_close_in = { { 0 } };
+	struct wired_cmd_close_session_out session_close_out = { { 0 } };
+	struct device *dev;
+	ssize_t byte;
+
+	if (!data)
+		return -EINVAL;
+
+	dev = &cldev->dev;
+
+	session_close_in.header.api_version = HDCP_API_VERSION;
+	session_close_in.header.command_id = WIRED_CLOSE_SESSION;
+	session_close_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	session_close_in.header.buffer_len =
+				WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN;
+
+	session_close_in.port.integrated_port_type = data->port_type;
+	session_close_in.port.physical_port = data->port;
+
+	byte = mei_cldev_send(cldev, (u8 *)&session_close_in,
+			      sizeof(session_close_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&session_close_out,
+			      sizeof(session_close_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (session_close_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "Session Close Failed. status: 0x%X\n",
+			session_close_out.header.status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
 static __attribute__((unused))
 struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.owner					= THIS_MODULE,
@@ -671,7 +725,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.verify_mprime				= mei_verify_mprime,
 	.enable_hdcp_authentication		=
 					mei_enable_hdcp_authentication,
-	.close_hdcp_session			= NULL,
+	.close_hdcp_session			= mei_close_hdcp_session,
 };
 
 static int mei_hdcp_probe(struct mei_cl_device *cldev,
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#36 lore raw

PATCH v7 36/39 misc/mei/hdcp: Component framework for I915 Interface

In reply to Ramalingam C

Mei hdcp driver is designed as component slave for the I915 component master.

v2:
Rebased.
v3:
Notifier chain is adopted for cldev state update [Tomas]
v4:
Made static dummy functions as inline in mei_hdcp.h API for polling client device status
IS_ENABLED used in header, for config status for mei_hdcp.
v5:
Replacing the notifier with component framework. [Daniel]
v6:
Rebased on the I915 comp master redesign.
v7:
mei_hdcp_component_registered is made static [Uma] Need for global static variable mei_cldev is removed.

---
 drivers/misc/mei/hdcp/mei_hdcp.c | 68 +++++++++++++++++++++++++++++++++++++---
 1 file changed, 64 insertions(+), 4 deletions(-)
drivers/misc/mei/hdcp/mei_hdcp.c +64 -4
index 993d46b3eda7..37e64fcb1388 100644
@@ -13,11 +13,14 @@
 #include <linux/uuid.h>
 #include <linux/mei_cl_bus.h>
 #include <linux/mei_hdcp.h>
+#include <linux/component.h>
 #include <drm/drm_connector.h>
 #include <drm/i915_component.h>
 
 #include "mei_hdcp.h"
 
+static bool mei_hdcp_component_registered;
+
 /*
  * mei_initiate_hdcp2_session:
  *	Function to start a Wired HDCP2.2 Tx Session with ME FW
@@ -709,8 +712,7 @@ static int mei_close_hdcp_session(struct mei_cl_device *cldev,
 	return 0;
 }
 
-static __attribute__((unused))
-struct i915_hdcp_component_ops mei_hdcp_ops = {
+static struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.owner					= THIS_MODULE,
 	.initiate_hdcp2_session			= mei_initiate_hdcp2_session,
 	.verify_receiver_cert_prepare_km	=
@@ -728,20 +730,78 @@ struct i915_hdcp_component_ops mei_hdcp_ops = {
 	.close_hdcp_session			= mei_close_hdcp_session,
 };
 
+static int mei_hdcp_component_bind(struct device *mei_kdev,
+				   struct device *i915_kdev, void *data)
+{
+	struct i915_component_master *comp = data;
+
+	dev_info(mei_kdev, "MEI HDCP comp bind\n");
+	WARN_ON(comp->hdcp_ops);
+
+	comp->hdcp_ops = &mei_hdcp_ops;
+	comp->i915_kdev = i915_kdev;
+	comp->mei_cldev = to_mei_cl_device(mei_kdev);
+
+	return 0;
+}
+
+static void mei_hdcp_component_unbind(struct device *mei_kdev,
+				      struct device *i915_kdev, void *data)
+{
+	struct i915_component_master *comp = data;
+
+	dev_info(mei_kdev, "MEI HDCP comp unbind\n");
+	comp->hdcp_ops = NULL;
+	comp->mei_cldev = NULL;
+}
+
+static const struct component_ops mei_hdcp_component_bind_ops = {
+	.bind	= mei_hdcp_component_bind,
+	.unbind	= mei_hdcp_component_unbind,
+};
+
+static void mei_hdcp_component_init(struct device *dev)
+{
+	int ret;
+
+	dev_err(dev, "MEI HDCP comp init\n");
+	ret = component_add(dev, &mei_hdcp_component_bind_ops);
+	if (ret < 0) {
+		dev_err(dev, "Failed to add MEI HDCP comp (%d)\n", ret);
+		return;
+	}
+
+	mei_hdcp_component_registered = true;
+}
+
+static void mei_hdcp_component_cleanup(struct device *dev)
+{
+	if (!mei_hdcp_component_registered)
+		return;
+
+	component_del(dev, &mei_hdcp_component_bind_ops);
+	mei_hdcp_component_registered = false;
+}
+
 static int mei_hdcp_probe(struct mei_cl_device *cldev,
 			  const struct mei_cl_device_id *id)
 {
 	int ret;
 
 	ret = mei_cldev_enable(cldev);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(&cldev->dev, "mei_cldev_enable Failed. %d\n", ret);
+		return ret;
+	}
+	mei_hdcp_component_init(&cldev->dev);
 
-	return ret;
+	return 0;
 }
 
 static int mei_hdcp_remove(struct mei_cl_device *cldev)
 {
+	mei_hdcp_component_cleanup(&cldev->dev);
+
 	return mei_cldev_disable(cldev);
 }
 
Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#37 lore raw

PATCH v7 37/39 drm/i915: Commit CP without modeset

In reply to Ramalingam C

Commits the content protection change of a connector, without crtc modeset. This improves the user experience.

Originally proposed by Sean Paul at v3 of HDCP1.4 framework
https://patchwork.freedesktop.org/patch/191759/. For some reason this was dropped, but needed for the proper functionality of HDCP encryption.

---
 drivers/gpu/drm/i915/intel_ddi.c     |  7 -------
 drivers/gpu/drm/i915/intel_display.c | 10 ++++++++++
 drivers/gpu/drm/i915/intel_drv.h     |  5 +++++
 drivers/gpu/drm/i915/intel_hdcp.c    | 32 ++++++++++++++++++++++++++++----
 4 files changed, 43 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +0 -7
index 7f34d3955ca1..9752dd37ad60 100644
@@ -3214,11 +3214,6 @@ static void intel_enable_ddi(struct intel_encoder *encoder,
 		intel_enable_ddi_hdmi(encoder, crtc_state, conn_state);
 	else
 		intel_enable_ddi_dp(encoder, crtc_state, conn_state);
-
-	/* Enable hdcp if it's desired */
-	if (conn_state->content_protection ==
-	    DRM_MODE_CONTENT_PROTECTION_DESIRED)
-		intel_hdcp_enable(to_intel_connector(conn_state->connector));
 }
 
 static void intel_disable_ddi_dp(struct intel_encoder *encoder,
@@ -3258,8 +3253,6 @@ static void intel_disable_ddi(struct intel_encoder *encoder,
 			      const struct intel_crtc_state *old_crtc_state,
 			      const struct drm_connector_state *old_conn_state)
 {
-	intel_hdcp_disable(to_intel_connector(old_conn_state->connector));
-
 	if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI))
 		intel_disable_ddi_hdmi(encoder, old_crtc_state, old_conn_state);
 	else
drivers/gpu/drm/i915/intel_display.c +10 -0
index 41a7b10f73dd..720b80a737f8 100644
@@ -12681,6 +12681,8 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	struct drm_crtc_state *old_crtc_state, *new_crtc_state;
 	struct intel_crtc_state *new_intel_crtc_state, *old_intel_crtc_state;
+	struct drm_connector_state *old_conn_state, *new_conn_state;
+	struct drm_connector *connector;
 	struct drm_crtc *crtc;
 	struct intel_crtc *intel_crtc;
 	u64 put_domains[I915_MAX_PIPES] = {};
@@ -12779,9 +12781,17 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
 		}
 	}
 
+	for_each_oldnew_connector_in_state(state, connector, old_conn_state,
+					   new_conn_state, i)
+		intel_hdcp_atomic_pre_commit(connector, old_conn_state,
+					     new_conn_state);
+
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
 	dev_priv->display.update_crtcs(state);
 
+	for_each_new_connector_in_state(state, connector, new_conn_state, i)
+		intel_hdcp_atomic_commit(connector, new_conn_state);
+
 	/* FIXME: We should call drm_atomic_helper_commit_hw_done() here
 	 * already, but still need the state for the delayed optimization. To
 	 * fix this:
drivers/gpu/drm/i915/intel_drv.h +5 -0
index f688bfacaa99..c3088ca7b936 100644
@@ -2003,6 +2003,11 @@ static inline void intel_backlight_device_unregister(struct intel_connector *con
 void intel_hdcp_atomic_check(struct drm_connector *connector,
 			     struct drm_connector_state *old_state,
 			     struct drm_connector_state *new_state);
+void intel_hdcp_atomic_pre_commit(struct drm_connector *connector,
+				  struct drm_connector_state *old_state,
+				  struct drm_connector_state *new_state);
+void intel_hdcp_atomic_commit(struct drm_connector *connector,
+			      struct drm_connector_state *new_state);
 int intel_hdcp_init(struct intel_connector *connector,
 		    const struct intel_hdcp_shim *hdcp_shim,
 		    bool hdcp2_supported);
drivers/gpu/drm/i915/intel_hdcp.c +28 -4
index 1f8550a03030..715649141206 100644
@@ -1792,7 +1792,6 @@ void intel_hdcp_atomic_check(struct drm_connector *connector,
 {
 	uint64_t old_cp = old_state->content_protection;
 	uint64_t new_cp = new_state->content_protection;
-	struct drm_crtc_state *crtc_state;
 
 	if (!new_state->crtc) {
 		/*
@@ -1813,10 +1812,35 @@ void intel_hdcp_atomic_check(struct drm_connector *connector,
 	    (old_cp == DRM_MODE_CONTENT_PROTECTION_DESIRED &&
 	     new_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED))
 		return;
+}
+
+void intel_hdcp_atomic_pre_commit(struct drm_connector *connector,
+				  struct drm_connector_state *old_state,
+				  struct drm_connector_state *new_state)
+{
+	u64 old_cp = old_state->content_protection;
+	u64 new_cp = new_state->content_protection;
+
+	/*
+	 * Disable HDCP if the connector is becoming disabled, or if requested
+	 * via the property.
+	 */
+	if ((!new_state->crtc &&
+	     old_cp != DRM_MODE_CONTENT_PROTECTION_UNDESIRED) ||
+	    (new_state->crtc &&
+	     old_cp != DRM_MODE_CONTENT_PROTECTION_UNDESIRED &&
+	     new_cp == DRM_MODE_CONTENT_PROTECTION_UNDESIRED))
+		intel_hdcp_disable(to_intel_connector(connector));
+}
+
+void intel_hdcp_atomic_commit(struct drm_connector *connector,
+			      struct drm_connector_state *new_state)
+{
+	u64 new_cp = new_state->content_protection;
 
-	crtc_state = drm_atomic_get_new_crtc_state(new_state->state,
-						   new_state->crtc);
-	crtc_state->mode_changed = true;
+	/* Enable hdcp if it's desired */
+	if (new_state->crtc && new_cp == DRM_MODE_CONTENT_PROTECTION_DESIRED)
+		intel_hdcp_enable(to_intel_connector(connector));
 }
 
 /* Handles the CP_IRQ raised from the DP HDCP sink */
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#38 lore raw

PATCH v7 38/39 drm/i915: Fix KBL HDCP2.2 encrypt status signalling

In reply to Ramalingam C

Implement the required WA sequence for KBL to fix the incorrect positioning of the window of oppurtunity and enc_en signalling.

---
 drivers/gpu/drm/i915/intel_hdcp.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
drivers/gpu/drm/i915/intel_hdcp.c +29 -0
index 715649141206..3de872864324 100644
@@ -12,6 +12,7 @@
 #include <linux/i2c.h>
 #include <linux/random.h>
 #include <linux/component.h>
+#include <linux/delay.h>
 
 #include "intel_drv.h"
 #include "i915_reg.h"
@@ -25,6 +26,27 @@
 static
 struct intel_digital_port *conn_to_dig_port(struct intel_connector *connector);
 
+static void kbl_repositioning_enc_en_signal(struct intel_connector *connector)
+{
+	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+	struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
+	struct intel_hdcp *hdcp = &connector->hdcp;
+	struct drm_crtc *crtc = connector->base.state->crtc;
+	struct intel_crtc *intel_crtc = container_of(crtc,
+						     struct intel_crtc, base);
+	u32 scanline;
+
+	for (;;) {
+		scanline = I915_READ(PIPEDSL(intel_crtc->pipe));
+		if (scanline > 100 && scanline < 200)
+			break;
+		usleep_range(25, 50);
+	}
+
+	hdcp->shim->toggle_signalling(intel_dig_port, false);
+	hdcp->shim->toggle_signalling(intel_dig_port, true);
+}
+
 static
 bool intel_hdcp_is_ksv_valid(u8 *ksv)
 {
@@ -1427,6 +1449,13 @@ static int hdcp2_enable_encryption(struct intel_connector *connector)
 	}
 
 	if (I915_READ(HDCP2_STATUS_DDI(port)) & LINK_AUTH_STATUS) {
+		/*
+		 * WA: To fix incorrect positioning of the window of
+		 * opportunity and enc_en signalling in KABYLAKE.
+		 */
+		if (IS_KABYLAKE(dev_priv) && hdcp->shim->toggle_signalling)
+			kbl_repositioning_enc_en_signal(connector);
+
 		/* Link is Authenticated. Now set for Encryption */
 		I915_WRITE(HDCP2_CTL_DDI(port),
 			   I915_READ(HDCP2_CTL_DDI(port)) |
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#39 lore raw

PATCH v7 39/39 FOR_TEST: misc/Kconfig: Enabling mei_hdcp by default

In reply to Ramalingam C

FOR TESTING PURPOSE ONLY.

Enabled the mei support for HDCP2.2. This patch is created to test the interface between I915 and MEI_HDCP.

---
 drivers/misc/mei/Kconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/misc/mei/Kconfig +1 -0
index 9c518b7f0011..90ed55210447 100644
@@ -48,5 +48,6 @@ config INTEL_MEI_HDCP
 	tristate "Intel HDCP2.2 services of ME Interface"
 	select INTEL_MEI_ME
 	depends on DRM_I915
+	default y
 	help
 	  MEI Support for HDCP2.2 Services on Intel SoCs.
Signature · 6 lines
2.7.4

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#40 lore raw

✗ Fi.CI.CHECKPATCH: warning for drm/i915: Implement HDCP2.2 (rev9)

In reply to Ramalingam C
== Series Details ==

== Series Details ==

Series: drm/i915: Implement HDCP2.2 (rev9)
URL : https://patchwork.freedesktop.org/series/38254/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
77a2e81767f0 drm: hdcp2.2 authentication msg definitions
27a36da1e882 drm: HDMI and DP specific HDCP2.2 defines
c347482c8951 linux/mei: Header for mei_hdcp driver interface
-:22: WARNING:TYPO_SPELLING: 'uneeded' may be misspelled - perhaps 'unneeded'?
#22: 
  Remove uneeded include to mei_cl_bus.h

-:30: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating? #30:
new file mode 100644

total: 0 errors, 2 warnings, 0 checks, 76 lines checked dc980fec1ff1 drm/i915: wrapping all hdcp var into intel_hdcp be83e8c5421d drm/i915: Define Intel HDCP2.2 registers 6f306266d10e component: alloc component_match without any comp to match -:55: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #55: FILE: drivers/base/component.c:321:
+void component_match_alloc(struct device *master,
+ struct component_match **matchptr)

-:90: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #90: FILE: include/linux/component.h:41:
+void component_match_alloc(struct device *master,
+ struct component_match **matchptr);

total: 0 errors, 0 warnings, 2 checks, 44 lines checked
cd643e8fc9c0 drm/i915: component master at i915 driver load
fb2e07b2d42f drm/i915: Initialize HDCP2.2 and its MEI interface
-:73: CHECK:BOOL_MEMBER: Avoid using bool structure members because of possible alignment issues - see: https://lkml.org/lkml/2017/11/21/384
#73: FILE: drivers/gpu/drm/i915/intel_drv.h:398:
+ bool hdcp2_supported;

-:120: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'port' - possible side-effects? #120: FILE: drivers/gpu/drm/i915/intel_hdcp.c:20:
+#define GET_MEI_DDI_INDEX(port) (((port) == PORT_A) ? DDI_A : \
+ (enum hdcp_physical_port)(port))

total: 0 errors, 0 warnings, 2 checks, 317 lines checked
5993b5b1e810 drm/i915: Pullout the bksv read and validation
6c0db9bd8765 drm/i915: Enable and Disable of HDCP2.2
-:57: CHECK:BOOL_MEMBER: Avoid using bool structure members because of possible alignment issues - see: https://lkml.org/lkml/2017/11/21/384
#57: FILE: drivers/gpu/drm/i915/intel_drv.h:403:
+ bool hdcp2_in_use;

total: 0 errors, 0 warnings, 1 checks, 291 lines checked
bb449e38ea32 drm/i915: Implement HDCP2.2 receiver authentication
-:86: CHECK:BOOL_MEMBER: Avoid using bool structure members because of possible alignment issues - see: https://lkml.org/lkml/2017/11/21/384
#86: FILE: drivers/gpu/drm/i915/intel_drv.h:431:
+ bool is_paired;

-:87: CHECK:BOOL_MEMBER: Avoid using bool structure members because of possible alignment issues - see: https://lkml.org/lkml/2017/11/21/384
#87: FILE: drivers/gpu/drm/i915/intel_drv.h:432:
+ bool is_repeater;

total: 0 errors, 0 warnings, 2 checks, 412 lines checked e20cb63aeaa8 drm/i915: Implement HDCP2.2 repeater authentication -:36: CHECK:OPEN_ENDED_LINE: Lines should not end with a '(' #36: FILE: drivers/gpu/drm/i915/intel_hdcp.c:1006:
+hdcp2_verify_rep_topology_prepare_ack(

total: 0 errors, 0 warnings, 1 checks, 202 lines checked b4e1a3c0009c drm/i915: Implement HDCP2.2 link integrity check -:40: CHECK:OPEN_ENDED_LINE: Lines should not end with a '(' #40: FILE: drivers/gpu/drm/i915/intel_display.c:16038:
+ cancel_delayed_work_sync(

total: 0 errors, 0 warnings, 1 checks, 146 lines checked
a4811110f4d8 drm/i915: Handle HDCP2.2 downstream topology change
7fe2e318c807 drm/i915: hdcp_check_link only on CP_IRQ
b6c82a0acd82 drm/i915: Check HDCP 1.4 and 2.2 link on CP_IRQ
79c4da19028b drm/i915: Implement the HDCP2.2 support for DP
2cf95c0e4808 drm/i915: Implement the HDCP2.2 support for HDMI
18ca3cd59cd1 drm/i915: Add HDCP2.2 support for DP connectors
f4a39f690565 drm/i915: Add HDCP2.2 support for HDMI connectors
ab931d674f21 mei: bus: whitelist hdcp client
af27e4c97077 mei: bus: export to_mei_cl_device for mei client device drivers 7987baf332fe misc/mei/hdcp: Client driver for HDCP application
-:81: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating? #81:
new file mode 100644

-:99: WARNING:SPDX_LICENSE_TAG: Missing or malformed SPDX-License-Identifier tag in line 1 #99: FILE: drivers/misc/mei/hdcp/mei_hdcp.c:1:
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */

total: 0 errors, 2 warnings, 0 checks, 76 lines checked
c7794f4e7584 misc/mei/hdcp: Define ME FW interface for HDCP2.2
-:30: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating? #30:
new file mode 100644

total: 0 errors, 1 warnings, 0 checks, 366 lines checked 743841c284b1 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session 912150e53f67 misc/mei/hdcp: Verify Receiver Cert and prepare km 8ed02cf0fd2f misc/mei/hdcp: Verify H_prime
391297fa7dc0 misc/mei/hdcp: Store the HDCP Pairing info e31c028e10ef misc/mei/hdcp: Initiate Locality check 72abe50d23f5 misc/mei/hdcp: Verify L_prime
f80437ace75b misc/mei/hdcp: Prepare Session Key 1f317263147e misc/mei/hdcp: Repeater topology verification and ack 94d016b344cc misc/mei/hdcp: Verify M_prime
9f1131e8944d misc/mei/hdcp: Enabling the HDCP authentication ef8db296dbd8 misc/mei/hdcp: Closing wired HDCP2.2 Tx Session 58db2396bc24 misc/mei/hdcp: Component framework for I915 Interface b3dbe6a0e93a drm/i915: Commit CP without modeset ecd1d7a70c32 drm/i915: Fix KBL HDCP2.2 encrypt status signalling e1809ad60740 FOR_TEST: misc/Kconfig: Enabling mei_hdcp by default

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#41 lore raw

✗ Fi.CI.SPARSE: warning for drm/i915: Implement HDCP2.2 (rev9)

In reply to Ramalingam C
== Series Details ==

== Series Details ==

Series: drm/i915: Implement HDCP2.2 (rev9)
URL : https://patchwork.freedesktop.org/series/38254/
State : warning

== Summary ==

$ dim sparse origin/drm-tip
Commit: drm: hdcp2.2 authentication msg definitions
Okay!

Commit: drm: HDMI and DP specific HDCP2.2 defines
Okay!

Commit: linux/mei: Header for mei_hdcp driver interface Okay!

Commit: drm/i915: wrapping all hdcp var into intel_hdcp Okay!

Commit: drm/i915: Define Intel HDCP2.2 registers
Okay!

Commit: component: alloc component_match without any comp to match Okay!

Commit: drm/i915: component master at i915 driver load -drivers/gpu/drm/i915/selftests/../i915_drv.h:3720:16: warning: expression using sizeof(void) +drivers/gpu/drm/i915/selftests/../i915_drv.h:3723:16: warning: expression using sizeof(void)

Commit: drm/i915: Initialize HDCP2.2 and its MEI interface +./include/linux/slab.h:631:13: error: not a function <noident>

Commit: drm/i915: Pullout the bksv read and validation Okay!

Commit: drm/i915: Enable and Disable of HDCP2.2
Okay!

Commit: drm/i915: Implement HDCP2.2 receiver authentication Okay!

Commit: drm/i915: Implement HDCP2.2 repeater authentication
+drivers/gpu/drm/i915/intel_hdcp.c:1236:30: expected restricted __be16 [assigned] [usertype] k
+drivers/gpu/drm/i915/intel_hdcp.c:1236:30: got int
+drivers/gpu/drm/i915/intel_hdcp.c:1236:30: warning: incorrect type in assignment (different base types)

Commit: drm/i915: Implement HDCP2.2 link integrity check Okay!

Commit: drm/i915: Handle HDCP2.2 downstream topology change Okay!

Commit: drm/i915: hdcp_check_link only on CP_IRQ
Okay!

Commit: drm/i915: Check HDCP 1.4 and 2.2 link on CP_IRQ
+drivers/gpu/drm/i915/intel_hdcp.c:779:5: warning: symbol 'intel_hdcp_check_link' was not declared. Should it be static?

Commit: drm/i915: Implement the HDCP2.2 support for DP Okay!

Commit: drm/i915: Implement the HDCP2.2 support for HDMI Okay!

Commit: drm/i915: Add HDCP2.2 support for DP connectors Okay!

Commit: drm/i915: Add HDCP2.2 support for HDMI connectors Okay!

Commit: mei: bus: whitelist hdcp client
Okay!

Commit: mei: bus: export to_mei_cl_device for mei client device drivers Okay!

Commit: misc/mei/hdcp: Client driver for HDCP application +Error in reading or end of file.

Commit: misc/mei/hdcp: Define ME FW interface for HDCP2.2 Okay!

Commit: misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session Okay!

Commit: misc/mei/hdcp: Verify Receiver Cert and prepare km Okay!

Commit: misc/mei/hdcp: Verify H_prime
Okay!

Commit: misc/mei/hdcp: Store the HDCP Pairing info Okay!

Commit: misc/mei/hdcp: Initiate Locality check
Okay!

Commit: misc/mei/hdcp: Verify L_prime
Okay!

Commit: misc/mei/hdcp: Prepare Session Key
Okay!

Commit: misc/mei/hdcp: Repeater topology verification and ack Okay!

Commit: misc/mei/hdcp: Verify M_prime
Okay!

Commit: misc/mei/hdcp: Enabling the HDCP authentication Okay!

Commit: misc/mei/hdcp: Closing wired HDCP2.2 Tx Session Okay!

Commit: misc/mei/hdcp: Component framework for I915 Interface Okay!

Commit: drm/i915: Commit CP without modeset
Okay!

Commit: drm/i915: Fix KBL HDCP2.2 encrypt status signalling Okay!

Commit: FOR_TEST: misc/Kconfig: Enabling mei_hdcp by default Okay!

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#42 lore raw

✗ Fi.CI.BAT: failure for drm/i915: Implement HDCP2.2 (rev9)

In reply to Ramalingam C
== Series Details ==

== Series Details ==

Series: drm/i915: Implement HDCP2.2 (rev9)
URL : https://patchwork.freedesktop.org/series/38254/
State : failure

== Summary ==

= CI Bug Log - changes from CI_DRM_4891 -> Patchwork_10292 =

== Summary - FAILURE ==

Serious unknown changes coming with Patchwork_10292 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_10292, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://patchwork.freedesktop.org/api/1.0/series/38254/revisions/9/mbox/

== Possible new issues ==

Here are the unknown changes that may have been introduced in Patchwork_10292:

=== IGT changes ===

    ==== Possible regressions ====

    igt@drv_module_reload@basic-no-display:
      fi-skl-iommu:       PASS -> DMESG-WARN +1
      fi-skl-caroline:    PASS -> DMESG-WARN +1
      fi-whl-u:           PASS -> DMESG-WARN +1
      fi-cfl-8109u:       PASS -> DMESG-WARN +1
      fi-skl-6700k2:      PASS -> DMESG-WARN +1
      fi-skl-6600u:       PASS -> DMESG-WARN +1
      fi-bxt-j4205:       PASS -> DMESG-WARN +1

    igt@drv_module_reload@basic-reload:
      fi-skl-guc:         PASS -> DMESG-WARN +1
      fi-kbl-x1275:       PASS -> FAIL
      fi-cfl-8700k:       PASS -> DMESG-WARN +1
      fi-snb-2520m:       PASS -> DMESG-WARN
      fi-bxt-dsi:         PASS -> DMESG-WARN +1
      fi-hsw-4770:        PASS -> DMESG-WARN +1
      fi-cfl-guc:         PASS -> DMESG-WARN +1
      fi-ilk-650:         PASS -> DMESG-WARN
      fi-bsw-n3050:       PASS -> DMESG-WARN
      fi-ivb-3770:        PASS -> DMESG-WARN
      fi-cfl-s3:          PASS -> DMESG-WARN
      fi-bsw-kefka:       PASS -> DMESG-WARN
      fi-skl-6770hq:      PASS -> DMESG-WARN
      fi-kbl-soraka:      NOTRUN -> FAIL
      fi-byt-n2820:       PASS -> DMESG-WARN
      fi-skl-gvtdvm:      PASS -> DMESG-WARN +1
      fi-snb-2600:        PASS -> DMESG-WARN

    igt@gem_exec_suspend@basic-s3:
      fi-kbl-r:           PASS -> DMESG-WARN
      fi-glk-dsi:         PASS -> DMESG-WARN
      fi-kbl-guc:         PASS -> DMESG-WARN

    igt@gem_exec_suspend@basic-s4-devices:
      fi-cnl-u:           PASS -> INCOMPLETE

    
    ==== Warnings ====

    igt@drv_module_reload@basic-reload:
      fi-icl-u:           DMESG-WARN (fdo#108070) -> FAIL

    igt@gem_exec_gttfill@basic:
      fi-kbl-x1275:       PASS -> SKIP +189

    igt@gem_exec_reloc@basic-gtt-read-noreloc:
      fi-icl-u:           PASS -> SKIP +182

    igt@gem_exec_store@basic-all:
      fi-kbl-soraka:      PASS -> SKIP +77

== Known issues ==

Here are the changes found in Patchwork_10292 that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@gem_exec_suspend@basic-s3:
      fi-kbl-7567u:       PASS -> INCOMPLETE (fdo#103665)
      fi-glk-j4005:       PASS -> INCOMPLETE (fdo#103359, k.org#198133)
      fi-kbl-7560u:       PASS -> DMESG-WARN (fdo#105602)
      fi-cnl-u:           PASS -> DMESG-WARN (fdo#106350)
      fi-blb-e6850:       PASS -> INCOMPLETE (fdo#107718)

    igt@gem_exec_suspend@basic-s4-devices:
      fi-kbl-guc:         PASS -> INCOMPLETE (fdo#106693, fdo#107139)
      fi-kbl-r:           PASS -> INCOMPLETE (fdo#107139)
      fi-glk-dsi:         PASS -> INCOMPLETE (fdo#103359, k.org#198133)
      fi-kbl-7560u:       PASS -> INCOMPLETE (fdo#107139)

    igt@kms_pipe_crc_basic@hang-read-crc-pipe-a:
      fi-byt-clapper:     PASS -> FAIL (fdo#103191, fdo#107362)

    igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
      fi-bdw-samus:       NOTRUN -> INCOMPLETE (fdo#107773)

    
    ==== Possible fixes ====

    igt@debugfs_test@read_all_entries:
      fi-icl-u:           DMESG-WARN (fdo#108070, fdo#107724) -> SKIP

    igt@drv_module_reload@basic-no-display:
      fi-icl-u:           DMESG-WARN (fdo#108071) -> PASS +1

    igt@drv_module_reload@basic-reload-inject:
      fi-icl-u:           DMESG-WARN (fdo#108070) -> PASS

    igt@gem_exec_suspend@basic-s3:
      fi-kbl-soraka:      INCOMPLETE (fdo#107556, fdo#107774) -> SKIP

    igt@gem_exec_suspend@basic-s4-devices:
      fi-bdw-samus:       INCOMPLETE (fdo#107773) -> PASS

    igt@kms_flip@basic-flip-vs-wf_vblank:
      fi-icl-u:           DMESG-WARN (fdo#108070) -> SKIP +44

fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#105602 https://bugs.freedesktop.org/show_bug.cgi?id=105602
fdo#106350 https://bugs.freedesktop.org/show_bug.cgi?id=106350
fdo#106693 https://bugs.freedesktop.org/show_bug.cgi?id=106693
fdo#107139 https://bugs.freedesktop.org/show_bug.cgi?id=107139
fdo#107362 https://bugs.freedesktop.org/show_bug.cgi?id=107362
fdo#107556 https://bugs.freedesktop.org/show_bug.cgi?id=107556
fdo#107718 https://bugs.freedesktop.org/show_bug.cgi?id=107718
fdo#107724 https://bugs.freedesktop.org/show_bug.cgi?id=107724
fdo#107773 https://bugs.freedesktop.org/show_bug.cgi?id=107773
fdo#107774 https://bugs.freedesktop.org/show_bug.cgi?id=107774
fdo#108070 https://bugs.freedesktop.org/show_bug.cgi?id=108070
fdo#108071 https://bugs.freedesktop.org/show_bug.cgi?id=108071
k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133

== Participating hosts (44 -> 39) ==

Missing (5): fi-hsw-4770r fi-bsw-cyan fi-ilk-m540 fi-byt-squawks fi-icl-u2

== Build changes ==

* Linux: CI_DRM_4891 -> Patchwork_10292

CI_DRM_4891: 6dd054dcd512197a7f607a46356038529e807de8 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4652: 83352d08b52acd6ee677f9f62dd032b0b8d31835 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_10292: e1809ad607409854545ae027a8c8e4e360d91782 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

e1809ad60740 FOR_TEST: misc/Kconfig: Enabling mei_hdcp by default ecd1d7a70c32 drm/i915: Fix KBL HDCP2.2 encrypt status signalling b3dbe6a0e93a drm/i915: Commit CP without modeset
58db2396bc24 misc/mei/hdcp: Component framework for I915 Interface ef8db296dbd8 misc/mei/hdcp: Closing wired HDCP2.2 Tx Session 9f1131e8944d misc/mei/hdcp: Enabling the HDCP authentication 94d016b344cc misc/mei/hdcp: Verify M_prime
1f317263147e misc/mei/hdcp: Repeater topology verification and ack f80437ace75b misc/mei/hdcp: Prepare Session Key
72abe50d23f5 misc/mei/hdcp: Verify L_prime
e31c028e10ef misc/mei/hdcp: Initiate Locality check
391297fa7dc0 misc/mei/hdcp: Store the HDCP Pairing info 8ed02cf0fd2f misc/mei/hdcp: Verify H_prime
912150e53f67 misc/mei/hdcp: Verify Receiver Cert and prepare km 743841c284b1 misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session c7794f4e7584 misc/mei/hdcp: Define ME FW interface for HDCP2.2 7987baf332fe misc/mei/hdcp: Client driver for HDCP application af27e4c97077 mei: bus: export to_mei_cl_device for mei client device drivers ab931d674f21 mei: bus: whitelist hdcp client
f4a39f690565 drm/i915: Add HDCP2.2 support for HDMI connectors 18ca3cd59cd1 drm/i915: Add HDCP2.2 support for DP connectors 2cf95c0e4808 drm/i915: Implement the HDCP2.2 support for HDMI 79c4da19028b drm/i915: Implement the HDCP2.2 support for DP b6c82a0acd82 drm/i915: Check HDCP 1.4 and 2.2 link on CP_IRQ 7fe2e318c807 drm/i915: hdcp_check_link only on CP_IRQ a4811110f4d8 drm/i915: Handle HDCP2.2 downstream topology change b4e1a3c0009c drm/i915: Implement HDCP2.2 link integrity check e20cb63aeaa8 drm/i915: Implement HDCP2.2 repeater authentication bb449e38ea32 drm/i915: Implement HDCP2.2 receiver authentication 6c0db9bd8765 drm/i915: Enable and Disable of HDCP2.2 5993b5b1e810 drm/i915: Pullout the bksv read and validation fb2e07b2d42f drm/i915: Initialize HDCP2.2 and its MEI interface cd643e8fc9c0 drm/i915: component master at i915 driver load 6f306266d10e component: alloc component_match without any comp to match be83e8c5421d drm/i915: Define Intel HDCP2.2 registers dc980fec1ff1 drm/i915: wrapping all hdcp var into intel_hdcp c347482c8951 linux/mei: Header for mei_hdcp driver interface 27a36da1e882 drm: HDMI and DP specific HDCP2.2 defines 77a2e81767f0 drm: hdcp2.2 authentication msg definitions

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10292/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx