Add support for loading FPGA bitstream
v10 cover Add support for loading FPGA bitstream
From: Tien Fong Chee <[email protected]>
This version mainly resolved some comments from Simek in [v9].
This series is working on top of u-boot.git http://git.denx.de/u-boot.git
These patches are required before applying this series of patches
1. [U-Boot,v4] misc: fs_loader: Add support for initializing block device
https://patchwork.ozlabs.org/project/uboot/list/?series=89282(done review)
3. [U-Boot] misc: fs_loader: Replace label with DT phandle
https://patchwork.ozlabs.org/project/uboot/list/?series=92167(under review)
[v9]: https://www.mail-archive.com/u-boot at lists.denx.de/msg316086.html [v8]: https://www.mail-archive.com/u-boot at lists.denx.de/msg316086.html [v7]: https://www.mail-archive.com/u-boot at lists.denx.de/msg314511.html
Tien Fong Chee (9):
ARM: socfpga: Description on FPGA bitstream type and file name for
Arria 10
ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
ARM: socfpga: Cleaning up the messages
ARM: socfpga: Move the watchdog reset to the looping location
ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
ARM: socfpga: Synchronize the configuration for A10 SoCDK
ARM: socfpga: Increase Malloc pool size to support FAT filesystem in
SPL
arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17 + .../include/mach/fpga_manager_arria10.h | 40 +- arch/arm/mach-socfpga/spl_a10.c | 31 +- board/altera/arria10-socdk/fit_spl_fpga.its | 38 ++ configs/socfpga_arria10_defconfig | 21 +- .../fpga/altera-socfpga-a10-fpga-mgr.txt | 26 +- drivers/fpga/socfpga_arria10.c | 514 ++++++++++++++++++++- include/configs/socfpga_common.h | 4 +- include/image.h | 4 + 9 files changed, 663 insertions(+), 32 deletions(-) create mode 100644 board/altera/arria10-socdk/fit_spl_fpga.its
Signature · 1 line
2.13.0
PATCH v10 1/9 ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
From: Tien Fong Chee <[email protected]>
This patch adds description on properties about file name used for both peripheral bitstream and core bitstream.
---
changes for v8
- Removed explanation about support for altr,bitstream-core
changes for v7
- Provided example of setting FPGA FIT image for both early IO release and full release FPGA configuration.
--- .../fpga/altera-socfpga-a10-fpga-mgr.txt | 26 +++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-)
doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt +25 -1
@@ -7,8 +7,31 @@ Required properties: - The second index is for writing FPGA configuration data. - resets : Phandle and reset specifier for the device's reset. - clocks : Clocks used by the device. +- altr,bitstream : Fit image file name for both FPGA peripheral bitstream, + FPGA core bitstream and full bitstream. -Example: + Full bitstream, consist of peripheral bitstream and core + bitstream. + + FPGA peripheral bitstream is used to initialize FPGA IOs, + PLL, IO48 and DDR. This bitstream is required to get DDR up + running. + + FPGA core bitstream contains FPGA design which is used to + program FPGA CRAM and ERAM. + +Example: Bundles both peripheral bitstream and core bitstream into FIT image + called fit_spl_fpga.itb. This FIT image can be created through running + this command: tools/mkimage + -E -p 400 + -f board/altera/arria10-socdk/fit_spl_fpga.its + fit_spl_fpga.itb + + For details of describing structure and contents of the FIT image, + please refer board/altera/arria10-socdk/fit_spl_fpga.its + +- Examples for booting with full release or booting with early IO release, then + follow by entering early user mode: fpga_mgr: fpga-mgr at ffd03000 { compatible = "altr,socfpga-a10-fpga-mgr";
@@ -16,4 +39,5 @@ Example: 0xffcfe400 0x20>; clocks = <&l4_mp_clk>; resets = <&rst FPGAMGR_RESET>; + altr,bitstream = "fit_spl_fpga.itb"; };
Signature · 1 line
2.13.0
PATCH v10 2/9 ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Add default fitImage file bundling FPGA bitstreams for Arria10.
---
changes for v10
- Replaced both image nodes "@1" and "@2" with "-1" and "-2" respectively.
changes for v9
- Reordered the images and fpga configurations.
- Removed the load property at core image.
changes for v8
- Changed the FPGA node name to fpga-core and fpga-periph for both core and periph bitstreams respectively.
--- board/altera/arria10-socdk/fit_spl_fpga.its | 38 +++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 board/altera/arria10-socdk/fit_spl_fpga.its
board/altera/arria10-socdk/fit_spl_fpga.its new file +38 -0
@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0 + /* + * Copyright (C) 2019 Intel Corporation <www.intel.com> + * + */ + +/dts-v1/; + +/ { + description = "FIT image with FPGA bistream"; + #address-cells = <1>; + + images { + fpga-periph-1 { + description = "FPGA peripheral bitstream"; + data = /incbin/("../../../ghrd_10as066n2.periph.rbf"); + type = "fpga"; + arch = "arm"; + compression = "none"; + }; + + fpga-core-2 { + description = "FPGA core bitstream"; + data = /incbin/("../../../ghrd_10as066n2.core.rbf"); + type = "fpga"; + arch = "arm"; + compression = "none"; + }; + }; + + configurations { + default = "config-1"; + config-1 { + description = "Boot with FPGA early IO release config"; + fpga = "fpga-periph-1", "fpga-core-2"; + }; + }; +};
Signature · 1 line
2.13.0
PATCH v10 3/9 ARM: socfpga: Cleaning up the messages
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Ensure the comment and debug messages are always consistent with the rest.
--- drivers/fpga/socfpga_arria10.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/fpga/socfpga_arria10.c +7 -6
@@ -94,7 +94,7 @@ int fpgamgr_wait_early_user_mode(void) i++; } -debug ("Additional %i sync word needed\n" , i); +debug ("FPGA: Additional %i sync word needed\n" , i);/* restoring original CDRATIO */ fpgamgr_set_cd_ratio (cd_ratio);
@@ -172,9 +172,10 @@ static int fpgamgr_set_cdratio_cdwidth(unsigned int cfg_width, u32 *rbf_data, compress = (rbf_data[COMPRESSION_OFFSET ] >>1 ) &1 ; compress = !compress; -debug ("header word %d = %08x\n" ,69 , rbf_data[69 ]); -debug ("header word %d = %08x\n" ,229 , rbf_data[229 ]); -debug ("read from rbf header: encrypt=%d compress=%d\n" , encrypt, compress); +debug ("FPGA: Header word %d = %08x.\n" ,69 , rbf_data[69 ]); +debug ("FPGA: Header word %d = %08x.\n" ,229 , rbf_data[229 ]); +debug ("FPGA: Read from rbf header: encrypt=%d compress=%d.\n" , encrypt, + compress);/* * from the register map description of cdratio in imgcfg_ctrl_02:
@@ -455,10 +456,10 @@ int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size) {int status; -/* disable all signals from hps peripheral controller to fpga */ +/* Disable all signals from hps peripheral controller to fpga */ writel (0 , &system_manager_base->fpgaintf_en_global); -/* disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */ +/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */ socfpga_bridges_reset ();/* Initialize the FPGA Manager */
Signature · 1 line
2.13.0
PATCH v10 4/9 ARM: socfpga: Move the watchdog reset to the looping location
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Ensure the watchdog is reset timely if the looping is long.
--- drivers/fpga/socfpga_arria10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/fpga/socfpga_arria10.c +1 -1
@@ -360,6 +360,7 @@ static int fpgamgr_program_poll_cd(void)printf ("nstatus == 0 while waiting for condone\n" );return -EPERM ; } +WATCHDOG_RESET (); }if (i ==FPGA_TIMEOUT_CNT )
@@ -433,7 +434,6 @@ int fpgamgr_program_finish(void)printf ("FPGA: Poll CD failed with error code %d\n" , status);return -EPERM ; } -WATCHDOG_RESET ();/* Ensure the FPGA entering user mode */ status =fpgamgr_program_poll_usermode ();
Signature · 1 line
2.13.0
PATCH v10 5/9 ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Add FPGA driver to support program FPGA with FPGA bitstream loading from filesystem. The driver are designed based on generic firmware loader framework. The driver can handle FPGA program operation from loading FPGA bitstream in flash to memory and then to program FPGA.
---
changes for v10
-Cleaned up the codes.
-Return -EPERM when programing core on non early IO release mode. -Using live function to get rid of gd->
-Removed @0 for fs-loader node
changes for v9
- Support data offset
- Added default DDR load address
- Squashed the image.h
- Changed to phandle
- Ensure the DDR is fully up running by checking the gd->ram
changes for v8
- Added codes to discern bitstream type based on fpga node name.
changes for v7
- Restructure the FPGA driver to support both peripheral bitstream and core bitstream bundled into FIT image.
- Support loadable property for core bitstream. User can set loadable in DDR for better performance. This loading would be done in one large chunk instead of chunk by chunk loading with small memory buffer.
--- arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17 + .../include/mach/fpga_manager_arria10.h | 39 +- drivers/fpga/socfpga_arria10.c | 497 ++++++++++++++++++++- include/image.h | 4 + 4 files changed, 542 insertions(+), 15 deletions(-)
arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts +17 -0
@@ -18,6 +18,23 @@ /dts-v1/; #include "socfpga_arria10_socdk.dtsi" +/ { + chosen { + firmware-loader = <&fs_loader0>; + }; + + fs_loader0: fs-loader { + u-boot,dm-pre-reloc; + compatible = "u-boot,fs-loader"; + phandlepart = <&mmc 1>; + }; +}; + +&fpga_mgr { + u-boot,dm-pre-reloc; + altr,bitstream = "fit_spl_fpga.itb"; +}; + &mmc { u-boot,dm-pre-reloc; status = "okay";
arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +37 -2
@@ -1,9 +1,13 @@/* SPDX-License-Identifier: GPL-2.0 */ /* -* Copyright (C) 2017 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.com> * All rights reserved. */ +#include <asm/cache.h> +#include <altera.h> +#include <image.h> +#ifndef _FPGA_MANAGER_ARRIA10_H_#define _FPGA_MANAGER_ARRIA10_H_
@@ -51,6 +55,10 @@#define ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK BIT(24)#define ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB 16 +#define FPGA_SOCFPGA_A10_RBF_UNENCRYPTED 0xa65c +#define FPGA_SOCFPGA_A10_RBF_ENCRYPTED 0xa65d +#define FPGA_SOCFPGA_A10_RBF_PERIPH 0x0001 +#define FPGA_SOCFPGA_A10_RBF_CORE 0x8001#ifndef __ASSEMBLY__ struct socfpga_fpga_manager {
@@ -88,12 +96,39 @@ struct socfpga_fpga_manager {u32 imgcfg_fifo_status; }; +enum rbf_type { + unknown, + periph_section, + core_section +}; + +enum rbf_security { + invalid, + unencrypted, + encrypted +}; + +struct rbf_info { +enum rbf_type section; +enum rbf_security security; +}; + +struct fpga_loadfs_info { +fpga_fs_info *fpga_fsinfo; +u32 remaining; +u32 offset; +struct rbf_info rbfinfo; +}; +/* Functions */ int fpgamgr_program_init (u32 * rbf_data,size_t rbf_size);int fpgamgr_program_finish (void );int is_fpgamgr_user_mode (void );int fpgamgr_wait_early_user_mode (void ); - +const char *get_fpga_filename (void ); +int socfpga_loadfs (fpga_fs_info *fpga_fsinfo,const void *buf,size_t bsize, +u32 offset); +void fpgamgr_program (const void *buf,size_t bsize,u32 offset);#endif /* __ASSEMBLY__ */ #endif /* _FPGA_MANAGER_ARRIA10_H_ */
drivers/fpga/socfpga_arria10.c +484 -13
532 lines not on this page · raw message
include/image.h +4 -0
@@ -1041,6 +1041,10 @@ int fit_check_format(const void *fit);int fit_conf_find_compat (const void *fit,const void *fdt);int fit_conf_get_node (const void *fit,const char *conf_uname); +int fit_conf_get_prop_node_count (const void *fit,int noffset, +const char *prop_name); +int fit_conf_get_prop_node_index (const void *fit,int noffset, +const char *prop_name,int index);/** * fit_conf_get_prop_node() - Get node refered to by a configuration
Signature · 1 line
2.13.0
PATCH v10 6/9 ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Update the default configuration file to enable the necessary functionality to get the SoCFPGA loadfs driver support. This would enable the implementation of programming bitstream into FPGA from MMC.
---
changes for v8
- Added FIT related configs
changes for v7
- Removed limit set for CONFIG_FS_FAT_MAX_CLUSTSIZE
--- configs/socfpga_arria10_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+)
configs/socfpga_arria10_defconfig +8 -0
@@ -27,10 +27,18 @@ CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0" # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc" CONFIG_ENV_IS_IN_MMC=y +CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_DM_MMC=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_FS_FAT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_FS_LOADER=y CONFIG_FPGA_SOCFPGA=y +CONFIG_SPL_FIT=y +CONFIG_FIT=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_MMC=y
Signature · 1 line
2.13.0
PATCH v10 7/9 spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Add support for loading FPGA bitstream to get DDR up running before U-Boot is loaded into DDR. Boot device initialization, generic firmware loader and SPL FAT support are required for this whole mechanism to work.
---
changes for v10
- Removed the static so the function can be referred by other c file.
changes for v9
- Used ALLOC_CACHE_ALIGN_BUFFER
- De-duplicated the same chunks of codes
changes for v7
- Removed casting for get_fpga_filename
- Removed hard coding DDR address for loading core bistream, using loadable property from FIT.
- Added checking for config_pins, return if error.
# Conflicts:
# arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h
--- .../include/mach/fpga_manager_arria10.h | 1 + arch/arm/mach-socfpga/spl_a10.c | 31 +++++++++++++++++++++- drivers/fpga/socfpga_arria10.c | 2 +- 3 files changed, 32 insertions(+), 2 deletions(-)
arch/arm/mach-socfpga/include/mach/fpga_manager_arria10.h +1 -0
@@ -126,6 +126,7 @@ int fpgamgr_program_finish(void);int is_fpgamgr_user_mode (void );int fpgamgr_wait_early_user_mode (void );const char *get_fpga_filename (void ); +int is_fpgamgr_early_user_mode (void );int socfpga_loadfs (fpga_fs_info *fpga_fsinfo,const void *buf,size_t bsize,u32 offset);void fpgamgr_program (const void *buf,size_t bsize,u32 offset);
arch/arm/mach-socfpga/spl_a10.c +30 -1
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0+ /* -* Copyright (C) 2012 Altera Corporation <www.altera.com> +* Copyright (C) 2012-2019 Altera Corporation <www.altera.com> */ #include <common.h>
@@ -23,6 +23,11 @@#include <fdtdec.h> #include <watchdog.h> #include <asm/arch/pinmux.h> +#include <asm/arch/fpga_manager.h> +#include <mmc.h> +#include <memalign.h> + +#define FPGA_BUFSIZ 16 * 1024DECLARE_GLOBAL_DATA_PTR ;
@@ -68,11 +73,35 @@ u32 spl_boot_mode(const u32 boot_device)void spl_board_init (void ) { +ALLOC_CACHE_ALIGN_BUFFER (char, buf,FPGA_BUFSIZ ); +/* enable console uart printing */ preloader_console_init ();WATCHDOG_RESET ();arch_early_init_r (); + +/* If the full FPGA is already loaded, ie.from EPCQ, config fpga pins */ +if (is_fpgamgr_user_mode ()) { +int ret =config_pins (gd->fdt_blob,"shared" ); + +if (ret) +return ; + + ret =config_pins (gd->fdt_blob,"fpga" ); +if (ret) +return ; + }else if (!is_fpgamgr_early_user_mode ()) { +/* Program IOSSM(early IO release) or full FPGA */ +fpgamgr_program (buf,FPGA_BUFSIZ ,0 ); + } + +/* If the IOSSM/full FPGA is already loaded, start DDR */ +if (is_fpgamgr_early_user_mode () ||is_fpgamgr_user_mode ()) +ddr_calibration_sequence (); + +if (!is_fpgamgr_user_mode ()) +fpgamgr_program (buf,FPGA_BUFSIZ ,0 ); }void board_init_f (ulong dummy)
drivers/fpga/socfpga_arria10.c +1 -1
@@ -69,7 +69,7 @@ static int wait_for_user_mode(void) 1, FPGA_TIMEOUT_MSEC, false); } -static int is_fpgamgr_early_user_mode (void ) +int is_fpgamgr_early_user_mode (void ) {return (readl (&fpga_manager_base->imgcfg_stat) &ALT_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE_SET_MSK ) !=0 ;
Signature · 1 line
2.13.0
PATCH v10 8/9 ARM: socfpga: Synchronize the configuration for A10 SoCDK
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
Update the default configuration file to enable the necessary functionality the get the kit working.
---
changes for v8
- Moved the FIT related configs to the patch of configuration for FPGA SoCFPGA A10 SoCDK.
changes for v7
- Keep minimal configs.
--- configs/socfpga_arria10_defconfig | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
configs/socfpga_arria10_defconfig +9 -6
@@ -10,10 +10,13 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" # CONFIG_USE_BOOTCOMMAND is not set +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb" +CONFIG_VERSION_VARIABLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_FPGA_SUPPORT=y -CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set
@@ -22,9 +25,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0" -# CONFIG_SPL_DOS_PARTITION is not set -# CONFIG_ISO_PARTITION is not set -# CONFIG_EFI_PARTITION is not set +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names" CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc" CONFIG_ENV_IS_IN_MMC=y CONFIG_SPL_ENV_SUPPORT=y
@@ -32,7 +33,6 @@ CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_DM_MMC=y CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_FS_FAT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_FS_LOADER=y
@@ -43,11 +43,14 @@ CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_MMC=y CONFIG_MTD_DEVICE=y +CONFIG_MMC_DW=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y +CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_DESIGNWARE_APB_TIMER=y -CONFIG_USE_TINY_PRINTF=y
Signature · 1 line
2.13.0
PATCH v10 9/9 ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
In reply to tien.fong.chee at intel.comFrom: Tien Fong Chee <[email protected]>
After some series of patches to maximise reusable of memory pool, here come to result of reasonable size required for whole SDMMC boot working on A10 SoCDK. Size required come from default max cluster(0x10000) + others(0x2000) + additional memory for headroom(0x3000).
---
changes for v7
- Added 0x3000 for memory headroom.
--- include/configs/socfpga_common.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
include/configs/socfpga_common.h +2 -2
@@ -1,6 +1,6 @@/* SPDX-License-Identifier: GPL-2.0+ */ /* -* Copyright (C) 2012 Altera Corporation <www.altera.com> +* Copyright (C) 2012-2019 Altera Corporation <www.altera.com> */ #ifndef __CONFIG_SOCFPGA_COMMON_H__#define __CONFIG_SOCFPGA_COMMON_H__
@@ -258,7 +258,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10 )/* SPL memory allocation configuration, this is for FAT implementation */ #ifndef CONFIG_SYS_SPL_MALLOC_START -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00015000#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_SPL_MALLOC_SIZE + \ CONFIG_SYS_INIT_RAM_ADDR)
Signature · 1 line
2.13.0
Chee
v10 cover Add support for loading FPGA bitstream
In reply to tien.fong.chee at intel.comQuoted 17 lines · tien.fong.chee at intel.com
From: Tien Fong Chee <[email protected]>
This version mainly resolved some comments from Simek in [v9].
This series is working on top of u-boot.git http://git.denx.de/u-boot
.gitThese patches are required before applying this series of patches
1. [U-Boot,v4] misc:fs_loader: Add support for initializing block device
https://patchwork.ozlabs.org/project/uboot/list/?series=89282(done
review)3. [U-Boot] misc:
fs_loader: Replace label with DT phandle
https://patchwork.ozlabs.org/project/uboot/list/?series=92167(under
review)
Quoted 7 lines
[v9]: https://www.mail-archive.com/u-boot at lists.denx.de/msg316086.htm l
[v8]: https://www.mail-archive.com/u-boot at lists.denx.de/msg316086.htm l
[v7]: https://www.mail-archive.com/u-boot at lists.denx.de/msg314511.htm l
Please ignore this series, i have some minor change for the fit image description.
Quoted 24 lines
Tien Fong Chee (9):
ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
ARM: socfpga: Cleaning up the messages
ARM: socfpga: Move the watchdog reset to the looping location
ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
ARM: socfpga: Synchronize the configuration for A10 SoCDK
ARM: socfpga: Increase Malloc pool size to support FAT filesystem in
SPLarch/arm/dts/socfpga_arria10_socdk_sdmmc.dts | 17 + .../include/mach/fpga_manager_arria10.h | 40 +- arch/arm/mach-socfpga/spl_a10.c | 31 +- board/altera/arria10-socdk/fit_spl_fpga.its | 38 ++ configs/socfpga_arria10_defconfig | 21 +- .../fpga/altera-socfpga-a10-fpga-mgr.txt | 26 +- drivers/fpga/socfpga_arria10.c | 514
++++++++++++++++++++-
include/configs/socfpga_common.h | 4 +- include/image.h | 4 +
Quoted 3 lines
9 files changed, 663 insertions(+), 32 deletions(-)create mode 100644 board/altera/arria10-socdk/fit_spl_fpga.its
Thanks,
TF