ARM: dts: aspeed: Add Swift BMC machine
Subsystems (3)
PATCH 1/1 ARM: dts: aspeed: Add Swift BMC machine
The Swift BMC is an ASPEED ast2500 based BMC that is part of a Power9 server. This adds the device tree description for most upstream components.
There's a pending TODO to create the flash layout for its 16GB NAND flash chip. Use the default 32MB NOR flash chip for this initial commit.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 702 +++++++++++++++++++++++++++++ 2 files changed, 703 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1204,6 +1204,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-swift.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +702 -0
702 lines not on this page · raw message
Signature · 1 line
1.8.3.1
Quoted 168 lines · Adriana Kobylak
The Swift BMC is an ASPEED ast2500 based BMC that is part of a Power9 server. This adds the device tree description for most upstream components.
There's a pending TODO to create the flash layout for its 16GB NAND flash chip. Use the default 32MB NOR flash chip for this initial commit.Signed-off-by Adriana Kobylak <[email protected]>--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 702 +++++++++++++++++++++++++++++ 2 files changed, 703 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-swift.dtsarch/arm/boot/dts/Makefile +1
-0@@ -1204,6 +1204,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-swift.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +135
-0@@ -0,0 +1,702 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Swift BMC"; + compatible = "ibm,swift-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 5)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(R, 7)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(N, 0)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + fanboost-presence { + label = "fanboost-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 3 GPIO_ACTIVE_LOW>; + }; + + fanboost {
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts line 145
Quoted 10 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +10
-0+ retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + }; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 13 GPIO_ACTIVE_LOW>; + };
I don't think this is the right device and pin for the front fault. Assuming these are numbered in order, I think you need a pca1 for the PCA9551 on i2c7, then it is LED2.
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts line 151
Quoted 6 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +6
-0+ + front-power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 14 GPIO_ACTIVE_LOW>; + };
I don't think this is the right device for front power LED. Continuing on from suggestion above, should this be <&pca1 3 GPIO_ACTIVE_LOW>?
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts line 157
Quoted 6 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +6
-0+ + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 15 GPIO_ACTIVE_LOW>; + };
I don't think this is the right device and pin for the front ID LED. Again, <&pca1 0 GPIO_ACTIVE_LOW> ?
Quoted 314 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +314
-0+ + rear-fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + rear-id { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; + }; + + rear-power { + gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + +}; + +/* TODO Update flash layout for 16GB NAND */ +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mbox { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c2 { + status = "okay"; + + /* MUX -> + * Samtec 1 + * Samtec 2 + */ +}; + +&i2c3 { + status = "okay"; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + si7021a20@20 { + compatible = "si,si7021a20"; + reg = <0x20>; + };
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts line 481
Quoted 10 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +10
-0+ + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + };
Should this be labeled pca1 and broken out like pca0 was? This is the chip for the front LED control.
Quoted 224 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +221
-1+}; + +&i2c8 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "P9_SCM0_PRES", "P9_SCM1_PRES", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c9 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; +}; + +&i2c10 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; +}; + +&i2c11 { + /* MUX + * -> PCIe Slot 0 + * -> PCIe Slot 1 + * -> PCIe Slot 2 + * -> PCIe Slot 3 + */ + status = "okay"; +}; + +&i2c12 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +#include "ibm-power9-dual.dtsi" --1.8.3.1
Quoted 305 lines · Adriana Kobylak
The Swift BMC is an ASPEED ast2500 based BMC that is part of a Power9 server. This adds the device tree description for most upstream components.
There's a pending TODO to create the flash layout for its 16GB NAND flash chip. Use the default 32MB NOR flash chip for this initial commit.Signed-off-by Adriana Kobylak <[email protected]>--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 702 +++++++++++++++++++++++++++++ 2 files changed, 703 insertions(+)create mode 100644
arch/arm/boot/dts/aspeed-bmc-opp-swift.dtsarch/arm/boot/dts/Makefile +1
-0@@ -1204,6 +1204,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-swift.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +273
-0@@ -0,0 +1,702 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Swift BMC"; + compatible = "ibm,swift-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 5)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(R, 7)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(N, 0)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + fanboost-presence { + label = "fanboost-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 3 GPIO_ACTIVE_LOW>; + }; + + fanboost { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + }; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 13 GPIO_ACTIVE_LOW>; + }; + + front-power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 14 GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 15 GPIO_ACTIVE_LOW>; + }; + + rear-fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + rear-id { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; + }; + + rear-power { + gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + +}; + +/* TODO Update flash layout for 16GB NAND */ +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mbox { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c2 { + status = "okay"; + + /* MUX -> + * Samtec 1 + * Samtec 2 + */ +}; + +&i2c3 { + status = "okay"; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>;
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts line 283
Quoted 10 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +10
-0+ #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach;
The 4 main fans are single rotor, so you don't need the fan-dual-tach line on them.
I'm not sure about that booster fan though.
Quoted 419 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +419
-0+ maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + si7021a20@20 { + compatible = "si,si7021a20"; + reg = <0x20>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + }; +}; + +&i2c8 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "P9_SCM0_PRES", "P9_SCM1_PRES", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c9 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; +}; + +&i2c10 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; +}; + +&i2c11 { + /* MUX + * -> PCIe Slot 0 + * -> PCIe Slot 1 + * -> PCIe Slot 2 + * -> PCIe Slot 3 + */ + status = "okay"; +}; + +&i2c12 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +#include "ibm-power9-dual.dtsi"
Joel Stanley
maintainerHi Adriana,
Quoted 23 lines · Matt Spinler
Quoted 10 lines · Adriana Kobylak
The Swift BMC is an ASPEED ast2500 based BMC that is part of a Power9 server. This adds the device tree description for most upstream components.
There's a pending TODO to create the flash layout for its 16GB NAND flash chip. Use the default 32MB NOR flash chip for this initial commit.arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +3
-0+ max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>;arch/arm/boot/dts/aspeed-bmc-opp-swift.dts line 283
Quoted 10 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +10
-0+ #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach;
Quoted 4 lines
The 4 main fans are single rotor, so you don't need the fan-dual-tach line on them.
I'm not sure about that booster fan though.
Are you going to send a v2 that address Matt's comment?
Quoted 7 lines
Quoted 7 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +5
-0+ maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + };
Quoted 5 lines · Joel Stanley
Hi Adriana,
Are you going to send a v2 that address Matt's comment?
Yeah, I wanted to wait to get a consensus on the flash layout for this system to not have to send a separate patch for it, which seems will happen this week, will send a v2 addressing the comments and removing the TODO to update the flash layout once I get that information.
Joel Stanley
maintainerQuoted 5 lines · Adriana Kobylak
Quoted 3 lines · Joel Stanley
Hi Adriana,
Quoted 7 lines
Quoted 2 lines
Are you going to send a v2 that address Matt's comment?
Yeah, I wanted to wait to get a consensus on the flash layout for this system to not have to send a separate patch for it, which seems will happen this week, will send a v2 addressing the comments and removing the TODO to update the flash layout once I get that information.
ping?
Quoted 9 lines · Joel Stanley
Quoted 8 lines · Adriana Kobylak
Quoted 5 lines · Joel Stanley
Hi Adriana,
Are you going to send a v2 that address Matt's comment?
Quoted 6 lines
Quoted 4 lines
Yeah, I wanted to wait to get a consensus on the flash layout for this system to not have to send a separate patch for it, which seems will happen this week, will send a v2 addressing the comments and removing the TODO to update the flash layout once I get that information.
ping?
Hi Joel, if you could review v4, seems we're ready to go, got a Reviewed-By from Matt for v3, and addressed a new comment from Brandon on v4, thanks! - https://patchwork.ozlabs.org/patch/1096042/
PATCH v2 1/1 ARM: dts: aspeed: Add Swift BMC machine
In reply to Matt SpinlerFrom: Adriana Kobylak <[email protected]>
The Swift BMC is an ASPEED ast2500 based BMC that is part of a Power9 server. This adds the device tree description for most upstream components.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 782 +++++++++++++++++++++++++++++ 2 files changed, 783 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1244,6 +1244,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-swift.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +782 -0
782 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v2 1/1 ARM: dts: aspeed: Add Swift BMC machine
Quoted 84 lines · Adriana Kobylak
From: Adriana Kobylak <[email protected]>
The Swift BMC is an ASPEED ast2500 based BMC that is part of a Power9 server. This adds the device tree description for most upstream components.
Signed-off-by Adriana Kobylak <[email protected]>--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 782 +++++++++++++++++++++++++++++ 2 files changed, 783 insertions(+)create mode 100644
arch/arm/boot/dts/aspeed-bmc-opp-swift.dtsarch/arm/boot/dts/Makefile +1
-0@@ -1244,6 +1244,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-swift.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +53
-0@@ -0,0 +1,782 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Swift BMC"; + compatible = "ibm,swift-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 5)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence {
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts line 63
Quoted 10 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +10
-0+ label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(R, 7)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(N, 0)>; + };
Can you also add the entries for the op-panel and CAPI riser presence detects?
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts line 76
Quoted 13 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +13
-0+ }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; +
The SCM and VRM presence detects from the pca9552 on bus 8 below
I think we also want listed here?
Quoted 611 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +611
-0+ fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + fanboost-presence { + label = "fanboost-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 3 GPIO_ACTIVE_LOW>; + }; + + fanboost { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + }; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + }; + + front-power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + }; + + rear-fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + rear-id { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; + }; + + rear-power { + gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x7F80000>; + label = "obmc-ubi"; + }; + }; + }; + + flash@1 { + status = "okay"; + label = "alt-bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x7F80000>; + label = "alt-obmc-ubi"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mbox { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c2 { + status = "okay"; + + /* MUX -> + * Samtec 1 + * Samtec 2 + */ +}; + +&i2c3 { + status = "okay"; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + si7021a20@20 { + compatible = "si,si7021a20"; + reg = <0x20>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca1: pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "P9_SCM0_PRES", "P9_SCM1_PRES", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c9 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + };
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts line 697
Quoted 10 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +10
-0+ + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + };
Can you add the EEPROM for this CPU0 VRM here?
Quoted 9 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +9
-0+}; + +&i2c10 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + };
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts line 716
Quoted 10 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +10
-0+ + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + };
Can you add the EEPROM for this CPU1 VRM here?
Quoted 66 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +66
-0+}; + +&i2c11 { + /* MUX + * -> PCIe Slot 0 + * -> PCIe Slot 1 + * -> PCIe Slot 2 + * -> PCIe Slot 3 + */ + status = "okay"; +}; + +&i2c12 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +#include "ibm-power9-dual.dtsi"
PATCH v3 1/1 ARM: dts: aspeed: Add Swift BMC machine
From: Adriana Kobylak <[email protected]>
The Swift BMC is an ASPEED ast2500 based BMC that is part of a Power9 server. This adds the device tree description for most upstream components.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 828 +++++++++++++++++++++++++++++ 2 files changed, 829 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1244,6 +1244,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-swift.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +828 -0
828 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v3 1/1 ARM: dts: aspeed: Add Swift BMC machine
Quoted 7 lines · Adriana Kobylak
From: Adriana Kobylak <[email protected]>
The Swift BMC is an ASPEED ast2500 based BMC that is part of a Power9 server. This adds the device tree description for most upstream components.
Signed-off-by Adriana Kobylak <[email protected]>
Quoted 852 lines
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 828 +++++++++++++++++++++++++++++ 2 files changed, 829 insertions(+)create mode 100644
arch/arm/boot/dts/aspeed-bmc-opp-swift.dtsarch/arm/boot/dts/Makefile +1
-0@@ -1244,6 +1244,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-swift.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +828
-0@@ -0,0 +1,828 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Swift BMC"; + compatible = "ibm,swift-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 5)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(R, 7)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(N, 0)>; + }; + + oppanel-presence { + label = "oppanel-presence"; + gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(A, 7)>; + }; + + opencapi-riser-presence { + label = "opencapi-riser-presence"; + gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(I, 0)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + scm0-presence { + label = "scm0-presence"; + gpios = <&pca9552 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + scm1-presence { + label = "scm1-presence"; + gpios = <&pca9552 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + cpu0vrm-presence { + label = "cpu0vrm-presence"; + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + + cpu1vrm-presence { + label = "cpu1vrm-presence"; + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + fanboost-presence { + label = "fanboost-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 3 GPIO_ACTIVE_LOW>; + }; + + fanboost { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + }; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + }; + + front-power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + }; + + rear-fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + rear-id { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; + }; + + rear-power { + gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x7F80000>; + label = "obmc-ubi"; + }; + }; + }; + + flash@1 { + status = "okay"; + label = "alt-bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x7F80000>; + label = "alt-obmc-ubi"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mbox { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c2 { + status = "okay"; + + /* MUX -> + * Samtec 1 + * Samtec 2 + */ +}; + +&i2c3 { + status = "okay"; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + si7021a20@20 { + compatible = "si,si7021a20"; + reg = <0x20>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca1: pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "P9_SCM0_PRES", "P9_SCM1_PRES", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c9 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; +}; + +&i2c10 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; +}; + +&i2c11 { + /* MUX + * -> PCIe Slot 0 + * -> PCIe Slot 1 + * -> PCIe Slot 2 + * -> PCIe Slot 3 + */ + status = "okay"; +}; + +&i2c12 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +#include "ibm-power9-dual.dtsi"
PATCH v3 1/1 ARM: dts: aspeed: Add Swift BMC machine
In reply to Adriana KobylakQuoted 227 lines · Adriana Kobylak
From: Adriana Kobylak <[email protected]>
The Swift BMC is an ASPEED ast2500 based BMC that is part of a Power9 server. This adds the device tree description for most upstream components.
Signed-off-by Adriana Kobylak <[email protected]>--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 828 +++++++++++++++++++++++++++++ 2 files changed, 829 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-swift.dtsarch/arm/boot/dts/Makefile +1
-0@@ -1244,6 +1244,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-swift.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +195
-0@@ -0,0 +1,828 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Swift BMC"; + compatible = "ibm,swift-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory at 80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region at 98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 5)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(R, 7)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(N, 0)>; + }; + + oppanel-presence { + label = "oppanel-presence"; + gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(A, 7)>; + }; + + opencapi-riser-presence { + label = "opencapi-riser-presence"; + gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(I, 0)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + scm0-presence { + label = "scm0-presence"; + gpios = <&pca9552 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + scm1-presence { + label = "scm1-presence"; + gpios = <&pca9552 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + cpu0vrm-presence { + label = "cpu0vrm-presence"; + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + + cpu1vrm-presence { + label = "cpu1vrm-presence"; + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + fanboost-presence { + label = "fanboost-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 3 GPIO_ACTIVE_LOW>; + }; + + fanboost { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + }; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + }; + + front-power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + }; + + rear-fault {
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts line 205
Quoted 10 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +10
-0+ gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + rear-id { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; + }; + + rear-power { + gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>; + };
Are you sure about this one? I see GPION3 as a no connect.
Quoted 626 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +623
-1+ }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + +}; + +&fmc { + status = "okay"; + + flash at 0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot at 0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env at 60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi at 80000 { + reg = < 0x80000 0x7F80000>; + label = "obmc-ubi"; + }; + }; + }; + + flash at 1 { + status = "okay"; + label = "alt-bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot at 0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env at 60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi at 80000 { + reg = < 0x80000 0x7F80000>; + label = "alt-obmc-ubi"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash at 0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mbox { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c2 { + status = "okay"; + + /* MUX -> + * Samtec 1 + * Samtec 2 + */ +}; + +&i2c3 { + status = "okay"; + + max31785 at 52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan at 0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan at 1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan at 2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan at 3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan at 4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + pca0: pca9552 at 60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio at 0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply at 68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + eeprom at 50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + power-supply at 69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; + + eeprom at 51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + dps: dps310 at 76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + tmp275 at 48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + si7021a20 at 20 { + compatible = "si,si7021a20"; + reg = <0x20>; + }; + + eeprom at 50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca1: pca9551 at 60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio at 0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + pca9552: pca9552 at 60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "P9_SCM0_PRES", "P9_SCM1_PRES", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio at 0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc at 32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom at 51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160 at 64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c9 { + status = "okay"; + + eeprom at 50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + tmp423a at 4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221 at 71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221 at 72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; +}; + +&i2c10 { + status = "okay"; + + eeprom at 50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + tmp423a at 4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221 at 71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221 at 72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; +}; + +&i2c11 { + /* MUX + * -> PCIe Slot 0 + * -> PCIe Slot 1 + * -> PCIe Slot 2 + * -> PCIe Slot 3 + */ + status = "okay"; +}; + +&i2c12 { + status = "okay"; + + tmp275 at 48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275 at 4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +#include "ibm-power9-dual.dtsi" --1.8.3.1
PATCH v3 1/1 ARM: dts: aspeed: Add Swift BMC machine
Quoted 9 lines
Quoted 6 lines
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +3
-0+ + rear-power { + gpios = <&gpio ASPEED_GPIO(N, 3)
GPIO_ACTIVE_LOW>;
+ };Are you sure about this one? I see GPION3 as a no connect.
You're right, this has been removed in the latest version of the schematics. Will remove it.
PATCH v4 1/1 ARM: dts: aspeed: Add Swift BMC machine
In reply to Brandon WymanFrom: Adriana Kobylak <[email protected]>
The Swift BMC is an ASPEED ast2500 based BMC that is part of a Power9 server. This adds the device tree description for most upstream components.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 824 +++++++++++++++++++++++++++++ 2 files changed, 825 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1245,6 +1245,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-swift.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +824 -0
824 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v4 1/1 ARM: dts: aspeed: Add Swift BMC machine
Quoted 857 lines · Adriana Kobylak
From: Adriana Kobylak <[email protected]>
The Swift BMC is an ASPEED ast2500 based BMC that is part of a Power9 server. This adds the device tree description for most upstream components.
Signed-off-by Adriana Kobylak <[email protected]>--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 824 +++++++++++++++++++++++++++++ 2 files changed, 825 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-swift.dtsarch/arm/boot/dts/Makefile +1
-0@@ -1245,6 +1245,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ + aspeed-bmc-opp-swift.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \arch/arm/boot/dts/aspeed-bmc-opp-swift.dts new file +824
-1@@ -0,0 +1,824 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Swift BMC"; + compatible = "ibm,swift-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory at 80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region at 98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 5)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(R, 7)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(N, 0)>; + }; + + oppanel-presence { + label = "oppanel-presence"; + gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(A, 7)>; + }; + + opencapi-riser-presence { + label = "opencapi-riser-presence"; + gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(I, 0)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + scm0-presence { + label = "scm0-presence"; + gpios = <&pca9552 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + scm1-presence { + label = "scm1-presence"; + gpios = <&pca9552 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + cpu0vrm-presence { + label = "cpu0vrm-presence"; + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + + cpu1vrm-presence { + label = "cpu1vrm-presence"; + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + fanboost-presence { + label = "fanboost-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 3 GPIO_ACTIVE_LOW>; + }; + + fanboost { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + }; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + }; + + front-power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + }; + + rear-fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + rear-id { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + +}; + +&fmc { + status = "okay"; + + flash at 0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot at 0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env at 60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi at 80000 { + reg = < 0x80000 0x7F80000>; + label = "obmc-ubi"; + }; + }; + }; + + flash at 1 { + status = "okay"; + label = "alt-bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot at 0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env at 60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi at 80000 { + reg = < 0x80000 0x7F80000>; + label = "alt-obmc-ubi"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash at 0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mbox { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c2 { + status = "okay"; + + /* MUX -> + * Samtec 1 + * Samtec 2 + */ +}; + +&i2c3 { + status = "okay"; + + max31785 at 52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan at 0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan at 1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan at 2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan at 3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan at 4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + pca0: pca9552 at 60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio at 0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply at 68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + eeprom at 50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + power-supply at 69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; + + eeprom at 51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + dps: dps310 at 76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + tmp275 at 48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + si7021a20 at 20 { + compatible = "si,si7021a20"; + reg = <0x20>; + }; + + eeprom at 50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca1: pca9551 at 60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio at 0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + pca9552: pca9552 at 60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "P9_SCM0_PRES", "P9_SCM1_PRES", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio at 0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio at 15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc at 32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom at 51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160 at 64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c9 { + status = "okay"; + + eeprom at 50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + tmp423a at 4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221 at 71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221 at 72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; +}; + +&i2c10 { + status = "okay"; + + eeprom at 50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + tmp423a at 4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221 at 71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221 at 72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; +}; + +&i2c11 { + /* MUX + * -> PCIe Slot 0 + * -> PCIe Slot 1 + * -> PCIe Slot 2 + * -> PCIe Slot 3 + */ + status = "okay"; +}; + +&i2c12 { + status = "okay"; + + tmp275 at 48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275 at 4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +#include "ibm-power9-dual.dtsi" --
Quoted 2 lines
1.8.3.1