Enable Bluetooth functionality for WCN3998.
Subsystems (5)
v6 cover Enable Bluetooth functionality for WCN3998.
This patch series we add support for WCN3998 BT chip set. This new chip set is based from the WCN3990 with minimal power numbers. So here in this patch The major difference between wcn3990 and WCN3998 is only power numbers. where as init process and fw download is same with wcn3990.
So we add new compatible for WCN3998.
Removed the Reading of regulator values from dts.
Added new compatible for WCN3998.
Changes in V6:
changed return value to false in the qca_is_wcn399x()stub Changes in V5:
changed is_qca_soc_type_wcn399x_family toqca_is_wcn399x helper function
Moved the qca_is_wcn399x function to btqca.c
modified the DT document for wcn399x as per driver code
Changes in V4:
Added is_qca_soc_type_wcn399x_family helper function
to get the soc type is wcn399x or not.
Changes in V3:
updated to latest code base.
Harish Bandi (2):
Bluetooth: hci_qca: Added support for WCN3998
dt-bindings: net: bluetooth: Add device tree bindings for QTI chip
WCN3998
.../devicetree/bindings/net/qualcomm-bluetooth.txt | 5 +-- drivers/bluetooth/btqca.c | 13 +++++-- drivers/bluetooth/btqca.h | 8 ++++- drivers/bluetooth/hci_qca.c | 40 ++++++++++++++-------- 4 files changed, 47 insertions(+), 19 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
PATCH v6 1/2 Bluetooth: hci_qca: Added support for WCN3998
Added new compatible for WCN3998 and corresponding voltage and current values to WCN3998 compatible.
Changed driver code to support WCN3998
---
Changes in V6:
- changed return value to false in the qca_is_wcn399x()stub
--- drivers/bluetooth/btqca.c | 13 +++++++++++-- drivers/bluetooth/btqca.h | 8 +++++++- drivers/bluetooth/hci_qca.c | 40 ++++++++++++++++++++++++++-------------- 3 files changed, 44 insertions(+), 17 deletions(-)
drivers/bluetooth/btqca.c +11 -2
@@ -344,7 +344,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,/* Download rampatch file */ config.type =TLV_TYPE_PATCH ; -if (soc_type ==QCA_WCN3990 ) { +if (qca_is_wcn399x (soc_type)) {/* Firmware files to download are based on ROM version. * ROM version is derived from last two bytes of soc_ver. */
@@ -365,7 +365,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,/* Download NVM configuration */ config.type =TLV_TYPE_NVM ; -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type))snprintf (config.fwname,sizeof (config.fwname),"qca/crnv%02x.bin" , rom_ver);else
@@ -410,6 +410,15 @@ int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) }EXPORT_SYMBOL_GPL (qca_set_bdaddr); +bool qca_is_wcn399x (enum qca_btsoc_type soc_type) +{ +if ((soc_type ==QCA_WCN3990 ) || (soc_type ==QCA_WCN3998 )) +return true; + +return false; +} +EXPORT_SYMBOL_GPL (qca_is_wcn399x); +MODULE_AUTHOR ("Ben Young Tae Kim <[email protected]>" );MODULE_DESCRIPTION ("Bluetooth support for Qualcomm Atheros family ver " VERSION );MODULE_VERSION (VERSION );
drivers/bluetooth/btqca.h +7 -1
@@ -132,7 +132,8 @@ enum qca_btsoc_type {QCA_INVALID =-1 ,QCA_AR3002 ,QCA_ROME , - QCA_WCN3990 +QCA_WCN3990 , + QCA_WCN3998, };#if IS_ENABLED (CONFIG_BT_QCA )
@@ -142,6 +143,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, enum qca_btsoc_type soc_type, u32 soc_ver);int qca_read_soc_version (struct hci_dev *hdev,u32 *soc_version);int qca_set_bdaddr (struct hci_dev *hdev,const bdaddr_t *bdaddr); +bool qca_is_wcn399x (enum qca_btsoc_type soc_type);#else static inline int qca_set_bdaddr_rome (struct hci_dev *hdev,const bdaddr_t *bdaddr)
@@ -165,4 +167,8 @@ static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) return -EOPNOTSUPP; } +static inline bool qca_is_wcn399x (enum qca_btsoc_type soc_type) +{ +return false; +}#endif
drivers/bluetooth/hci_qca.c +26 -14
@@ -521,7 +521,7 @@ static int qca_open(struct hci_uart *hu)if (hu->serdev) { qcadev =serdev_device_get_drvdata (hu->serdev); -if (qcadev->btsoc_type !=QCA_WCN3990 ) { +if (!qca_is_wcn399x (qcadev->btsoc_type)) {gpiod_set_value_cansleep (qcadev->bt_en,1 ); }else { hu->init_speed = qcadev->init_speed;
@@ -627,7 +627,7 @@ static int qca_close(struct hci_uart *hu)if (hu->serdev) { qcadev =serdev_device_get_drvdata (hu->serdev); -if (qcadev->btsoc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (qcadev->btsoc_type))qca_power_shutdown (hu);else gpiod_set_value_cansleep (qcadev->bt_en,0 );
@@ -1008,7 +1008,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate) msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));/* Give the controller time to process the request */ -if (qca_soc_type (hu) ==QCA_WCN3990 ) +if (qca_is_wcn399x (qca_soc_type (hu)))msleep (10 );else msleep (300 );
@@ -1084,7 +1084,7 @@ static unsigned int qca_get_speed(struct hci_uart *hu,static int qca_check_speeds (struct hci_uart *hu) { -if (qca_soc_type (hu) ==QCA_WCN3990 ) { +if (qca_is_wcn399x (qca_soc_type (hu))) {if (!qca_get_speed (hu,QCA_INIT_SPEED ) && !qca_get_speed (hu,QCA_OPER_SPEED ))return -EINVAL ;
@@ -1116,7 +1116,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)/* Disable flow control for wcn3990 to deassert RTS while * changing the baudrate of chip and host. */ -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type))hci_uart_set_flow_control (hu, true); qca_baudrate =qca_get_baudrate_value (speed);
@@ -1128,7 +1128,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)host_set_baudrate (hu, speed); error: -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type))hci_uart_set_flow_control (hu, false); }
@@ -1201,7 +1201,7 @@ static int qca_setup(struct hci_uart *hu)/* Patch downloading has to be done without IBS mode */ clear_bit (STATE_IN_BAND_SLEEP_ENABLED , &qca->flags); -if (soc_type ==QCA_WCN3990 ) { +if (qca_is_wcn399x (soc_type)) {bt_dev_info (hdev,"setting up wcn3990" );/* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
@@ -1232,7 +1232,7 @@ static int qca_setup(struct hci_uart *hu) qca_baudrate =qca_get_baudrate_value (speed); } -if (soc_type !=QCA_WCN3990 ) { +if (!qca_is_wcn399x (soc_type)) {/* Get QCA version information */ ret =qca_read_soc_version (hdev, &soc_ver);if (ret)
@@ -1257,7 +1257,7 @@ static int qca_setup(struct hci_uart *hu) }/* Setup bdaddr */ -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type)) hu->hdev->set_bdaddr = qca_set_bdaddr;else hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
@@ -1280,7 +1280,7 @@ static int qca_setup(struct hci_uart *hu) .dequeue = qca_dequeue, }; -static const struct qca_vreg_data qca_soc_data = { +static const struct qca_vreg_data qca_soc_data_wcn3990 = { .soc_type =QCA_WCN3990 , .vregs = (struct qca_vreg []) { {"vddio" ,1800000 ,1900000 ,15000 },
@@ -1291,6 +1291,17 @@ static int qca_setup(struct hci_uart *hu) .num_vregs = 4, }; +static const struct qca_vreg_data qca_soc_data_wcn3998 = { + .soc_type =QCA_WCN3998 , + .vregs = (struct qca_vreg []) { + {"vddio" ,1800000 ,1900000 ,10000 }, + {"vddxo" ,1800000 ,1900000 ,80000 }, + {"vddrf" ,1300000 ,1352000 ,300000 }, + {"vddch0" ,3300000 ,3300000 ,450000 }, + }, + .num_vregs =4 , +}; +static void qca_power_shutdown (struct hci_uart *hu) {struct qca_data *qca = hu->priv;
@@ -1424,8 +1435,8 @@ static int qca_serdev_probe(struct serdev_device *serdev) qcadev->serdev_hu.serdev = serdev; data =of_device_get_match_data (&serdev->dev);serdev_device_set_drvdata (serdev, qcadev); -if (data && data->soc_type ==QCA_WCN3990 ) { - qcadev->btsoc_type =QCA_WCN3990 ; +if (data &&qca_is_wcn399x (data->soc_type)) { + qcadev->btsoc_type = data->soc_type; qcadev->bt_power =devm_kzalloc (&serdev->dev,sizeof (struct qca_power ),GFP_KERNEL );
@@ -1489,7 +1500,7 @@ static void qca_serdev_remove(struct serdev_device *serdev) {struct qca_serdev *qcadev =serdev_device_get_drvdata (serdev); -if (qcadev->btsoc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (qcadev->btsoc_type))qca_power_shutdown (&qcadev->serdev_hu);else clk_disable_unprepare (qcadev->susclk);
@@ -1499,7 +1510,8 @@ static void qca_serdev_remove(struct serdev_device *serdev)static const struct of_device_id qca_bluetooth_of_match[] = { { .compatible ="qcom,qca6174-bt" }, - { .compatible ="qcom,wcn3990-bt" , .data = &qca_soc_data}, + { .compatible ="qcom,wcn3990-bt" , .data = &qca_soc_data_wcn3990}, + { .compatible ="qcom,wcn3998-bt" , .data = &qca_soc_data_wcn3998}, {/* sentinel */ } };MODULE_DEVICE_TABLE (of, qca_bluetooth_of_match);
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Re: [PATCH v6 1/2] Bluetooth: hci_qca: Added support for WCN3998
Hi Harish,
Quoted 154 lines · Harish Bandi
Added new compatible for WCN3998 and corresponding voltage and current values to WCN3998 compatible.
Changed driver code to support WCN3998Signed-off-by Harish Bandi <[email protected]>---
Changes in V6:
- changed return value to false in the qca_is_wcn399x()stub--- drivers/bluetooth/btqca.c | 13 +++++++++++-- drivers/bluetooth/btqca.h | 8 +++++++- drivers/bluetooth/hci_qca.c | 40 ++++++++++++++++++++++++++-------------- 3 files changed, 44 insertions(+), 17 deletions(-)drivers/bluetooth/btqca.c +1
-1@@ -344,7 +344,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,/* Download rampatch file */ config.type =TLV_TYPE_PATCH ; -if (soc_type ==QCA_WCN3990 ) { +if (qca_is_wcn399x (soc_type)) {/* Firmware files to download are based on ROM version. * ROM version is derived from last two bytes of soc_ver. drivers/bluetooth/btqca.c +1
-1*/ @@ -365,7 +365,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,/* Download NVM configuration */ config.type =TLV_TYPE_NVM ; -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type))snprintf (config.fwname,sizeof (config.fwname),"qca/crnv%02x.bin" , rom_ver);drivers/bluetooth/btqca.c +9
-0else @@ -410,6 +410,15 @@ int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) }EXPORT_SYMBOL_GPL (qca_set_bdaddr); +bool qca_is_wcn399x (enum qca_btsoc_type soc_type) +{ +if ((soc_type ==QCA_WCN3990 ) || (soc_type ==QCA_WCN3998 )) +return true; + +return false; +} +EXPORT_SYMBOL_GPL (qca_is_wcn399x); +MODULE_AUTHOR ("Ben Young Tae Kim <[email protected]>" ); MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver" VERSION);
MODULE_VERSION(VERSION);drivers/bluetooth/btqca.h +3
-1@@ -132,7 +132,8 @@ enum qca_btsoc_type {QCA_INVALID =-1 ,QCA_AR3002 ,QCA_ROME , - QCA_WCN3990 +QCA_WCN3990 , + QCA_WCN3998, };#if IS_ENABLED (CONFIG_BT_QCA )@@ -142,6 +143,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, enum qca_btsoc_type soc_type, u32 soc_ver);int qca_read_soc_version (struct hci_dev *hdev,u32 *soc_version);int qca_set_bdaddr (struct hci_dev *hdev,const bdaddr_t *bdaddr); +bool qca_is_wcn399x (enum qca_btsoc_type soc_type);#else static inline int qca_set_bdaddr_rome(struct
hci_dev*hdev, constbdaddr_t*bdaddr)drivers/bluetooth/btqca.h +4
-0@@ -165,4 +167,8 @@ static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)return -EOPNOTSUPP ; } +static inline bool qca_is_wcn399x (enum qca_btsoc_type soc_type) +{ +return false; +}#endif
drivers/bluetooth/hci_qca.c +3
-3@@ -521,7 +521,7 @@ static int qca_open(struct hci_uart *hu)if (hu->serdev) { qcadev =serdev_device_get_drvdata (hu->serdev); -if (qcadev->btsoc_type !=QCA_WCN3990 ) { +if (!qca_is_wcn399x (qcadev->btsoc_type)) {gpiod_set_value_cansleep (qcadev->bt_en,1 ); }else { hu->init_speed = qcadev->init_speed;@@ -627,7 +627,7 @@ static int qca_close(struct hci_uart *hu)if (hu->serdev) { qcadev =serdev_device_get_drvdata (hu->serdev); -if (qcadev->btsoc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (qcadev->btsoc_type))qca_power_shutdown (hu);else gpiod_set_value_cansleep (qcadev->bt_en,0 );@@ -1008,7 +1008,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate) msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));/* Give the controller time to process the request */ -if (qca_soc_type (hu) ==QCA_WCN3990 ) +if (qca_is_wcn399x (qca_soc_type (hu)))msleep (10 );else drivers/bluetooth/hci_qca.c +1
-1msleep (300 );@@ -1084,7 +1084,7 @@ static unsigned int qca_get_speed(struct hci_uart *hu, static int qca_check_speeds(struct hci_uart *hu) { -if (qca_soc_type (hu) ==QCA_WCN3990 ) { +if (qca_is_wcn399x (qca_soc_type (hu))) {if (!qca_get_speed (hu,QCA_INIT_SPEED ) && !qca_get_speed (hu,QCA_OPER_SPEED ))drivers/bluetooth/hci_qca.c +1
-1return -EINVAL ;@@ -1116,7 +1116,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)/* Disable flow control for wcn3990 to deassert RTS while * changing the baudrate of chip and host. */ -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type))hci_uart_set_flow_control (hu, true);drivers/bluetooth/hci_qca.c +1
-1qca_baudrate =qca_get_baudrate_value (speed);@@ -1128,7 +1128,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)host_set_baudrate (hu ,speed ); error: -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type))hci_uart_set_flow_control (hu, false); }
drivers/bluetooth/hci_qca.c static int qca_setup(struct hci_uart *hu) · line 1205
Quoted 6 lines
drivers/bluetooth/hci_qca.c +1
-1@@ -1201,7 +1201,7 @@ static int qca_setup(struct hci_uart *hu)/* Patch downloading has to be done without IBS mode */ clear_bit (STATE_IN_BAND_SLEEP_ENABLED , &qca->flags); -if (soc_type ==QCA_WCN3990 ) { +if (qca_is_wcn399x (soc_type)) {bt_dev_info (hdev,"setting up wcn3990" );
[Bala]: nit: if you respin the serie.
let us make this "wcn3990" string in the info message as
wcn399x or with actual chip name.
Quoted 79 lines
drivers/bluetooth/hci_qca.c +16
-5/* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute @@ -1232,7 +1232,7 @@ static int qca_setup(struct hci_uart *hu) qca_baudrate =qca_get_baudrate_value (speed); } -if (soc_type !=QCA_WCN3990 ) { +if (!qca_is_wcn399x (soc_type)) {/* Get QCA version information */ ret =qca_read_soc_version (hdev, &soc_ver);if (ret)@@ -1257,7 +1257,7 @@ static int qca_setup(struct hci_uart *hu) }/* Setup bdaddr */ -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type)) hu->hdev->set_bdaddr = qca_set_bdaddr;else hu->hdev->set_bdaddr = qca_set_bdaddr_rome;@@ -1280,7 +1280,7 @@ static int qca_setup(struct hci_uart *hu) .dequeue = qca_dequeue, }; -static const struct qca_vreg_data qca_soc_data = { +static const struct qca_vreg_data qca_soc_data_wcn3990 = { .soc_type =QCA_WCN3990 , .vregs = (struct qca_vreg []) { {"vddio" ,1800000 ,1900000 ,15000 },@@ -1291,6 +1291,17 @@ static int qca_setup(struct hci_uart *hu) .num_vregs = 4, }; +static const struct qca_vreg_data qca_soc_data_wcn3998 = { + .soc_type =QCA_WCN3998 , + .vregs = (struct qca_vreg []) { + {"vddio" ,1800000 ,1900000 ,10000 }, + {"vddxo" ,1800000 ,1900000 ,80000 }, + {"vddrf" ,1300000 ,1352000 ,300000 }, + {"vddch0" ,3300000 ,3300000 ,450000 }, + }, + .num_vregs =4 , +}; +static void qca_power_shutdown (struct hci_uart *hu) {struct qca_data *qca = hu->priv;@@ -1424,8 +1435,8 @@ static int qca_serdev_probe(struct serdev_device *serdev) qcadev->serdev_hu.serdev = serdev; data =of_device_get_match_data (&serdev->dev);serdev_device_set_drvdata (serdev, qcadev); -if (data && data->soc_type ==QCA_WCN3990 ) { - qcadev->btsoc_type =QCA_WCN3990 ; +if (data &&qca_is_wcn399x (data->soc_type)) { + qcadev->btsoc_type = data->soc_type; qcadev->bt_power = devm_kzalloc(&serdev->dev, sizeof(struct qca_power),drivers/bluetooth/hci_qca.c +1
-1GFP_KERNEL);@@ -1489,7 +1500,7 @@ static void qca_serdev_remove(struct serdev_device *serdev) {struct qca_serdev *qcadev =serdev_device_get_drvdata (serdev); -if (qcadev->btsoc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (qcadev->btsoc_type))qca_power_shutdown (&qcadev->serdev_hu);else drivers/bluetooth/hci_qca.c +2
-1clk_disable_unprepare (qcadev->susclk);@@ -1499,7 +1510,8 @@ static void qca_serdev_remove(struct serdev_device *serdev)static const struct of_device_id qca_bluetooth_of_match[] = { { .compatible ="qcom,qca6174-bt" }, - { .compatible ="qcom,wcn3990-bt" , .data = &qca_soc_data}, + { .compatible ="qcom,wcn3990-bt" , .data = &qca_soc_data_wcn3990}, + { .compatible ="qcom,wcn3998-bt" , .data = &qca_soc_data_wcn3998}, {/* sentinel */ } };
Quoted 1 line
MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
Signature · 2 lines
Regards Balakrishna.
Re: [PATCH v6 1/2] Bluetooth: hci_qca: Added support for WCN3998
In reply to Harish BandiQuoted 5 lines · Harish Bandi
Added new compatible for WCN3998 and corresponding voltage and current values to WCN3998 compatible.
Changed driver code to support WCN3998Signed-off-by Harish Bandi <[email protected]>
You forgot to add 'Reviewed-by' my tag from v5. No need to resend, I'll add it again below, but it's the general practice to include tags like 'Reviewed-by' or 'Acked-by' when sending a new revision.
Quoted 211 lines
---
Changes in V6:
- changed return value to false in the qca_is_wcn399x()stub--- drivers/bluetooth/btqca.c | 13 +++++++++++-- drivers/bluetooth/btqca.h | 8 +++++++- drivers/bluetooth/hci_qca.c | 40 ++++++++++++++++++++++++++-------------- 3 files changed, 44 insertions(+), 17 deletions(-)drivers/bluetooth/btqca.c +11
-2@@ -344,7 +344,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,/* Download rampatch file */ config.type =TLV_TYPE_PATCH ; -if (soc_type ==QCA_WCN3990 ) { +if (qca_is_wcn399x (soc_type)) {/* Firmware files to download are based on ROM version. * ROM version is derived from last two bytes of soc_ver. */ @@ -365,7 +365,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,/* Download NVM configuration */ config.type =TLV_TYPE_NVM ; -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type))snprintf (config.fwname,sizeof (config.fwname),"qca/crnv%02x.bin" , rom_ver);else @@ -410,6 +410,15 @@ int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) }EXPORT_SYMBOL_GPL (qca_set_bdaddr); +bool qca_is_wcn399x (enum qca_btsoc_type soc_type) +{ +if ((soc_type ==QCA_WCN3990 ) || (soc_type ==QCA_WCN3998 )) +return true; + +return false; +} +EXPORT_SYMBOL_GPL (qca_is_wcn399x); +MODULE_AUTHOR ("Ben Young Tae Kim <[email protected]>" );MODULE_DESCRIPTION ("Bluetooth support for Qualcomm Atheros family ver " VERSION );MODULE_VERSION (VERSION );drivers/bluetooth/btqca.h +7
-1@@ -132,7 +132,8 @@ enum qca_btsoc_type {QCA_INVALID =-1 ,QCA_AR3002 ,QCA_ROME , - QCA_WCN3990 +QCA_WCN3990 , + QCA_WCN3998, };#if IS_ENABLED (CONFIG_BT_QCA )@@ -142,6 +143,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, enum qca_btsoc_type soc_type, u32 soc_ver);int qca_read_soc_version (struct hci_dev *hdev,u32 *soc_version);int qca_set_bdaddr (struct hci_dev *hdev,const bdaddr_t *bdaddr); +bool qca_is_wcn399x (enum qca_btsoc_type soc_type);#else static inline int qca_set_bdaddr_rome (struct hci_dev *hdev,const bdaddr_t *bdaddr)@@ -165,4 +167,8 @@ static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) return -EOPNOTSUPP; } +static inline bool qca_is_wcn399x (enum qca_btsoc_type soc_type) +{ +return false; +}#endif drivers/bluetooth/hci_qca.c +24
-13@@ -521,7 +521,7 @@ static int qca_open(struct hci_uart *hu)if (hu->serdev) { qcadev =serdev_device_get_drvdata (hu->serdev); -if (qcadev->btsoc_type !=QCA_WCN3990 ) { +if (!qca_is_wcn399x (qcadev->btsoc_type)) {gpiod_set_value_cansleep (qcadev->bt_en,1 ); }else { hu->init_speed = qcadev->init_speed;@@ -627,7 +627,7 @@ static int qca_close(struct hci_uart *hu)if (hu->serdev) { qcadev =serdev_device_get_drvdata (hu->serdev); -if (qcadev->btsoc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (qcadev->btsoc_type))qca_power_shutdown (hu);else gpiod_set_value_cansleep (qcadev->bt_en,0 );@@ -1008,7 +1008,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate) msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));/* Give the controller time to process the request */ -if (qca_soc_type (hu) ==QCA_WCN3990 ) +if (qca_is_wcn399x (qca_soc_type (hu)))msleep (10 );else msleep (300 );@@ -1084,7 +1084,7 @@ static unsigned int qca_get_speed(struct hci_uart *hu,static int qca_check_speeds (struct hci_uart *hu) { -if (qca_soc_type (hu) ==QCA_WCN3990 ) { +if (qca_is_wcn399x (qca_soc_type (hu))) {if (!qca_get_speed (hu,QCA_INIT_SPEED ) && !qca_get_speed (hu,QCA_OPER_SPEED ))return -EINVAL ;@@ -1116,7 +1116,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)/* Disable flow control for wcn3990 to deassert RTS while * changing the baudrate of chip and host. */ -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type))hci_uart_set_flow_control (hu, true); qca_baudrate =qca_get_baudrate_value (speed);@@ -1128,7 +1128,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)host_set_baudrate (hu, speed); error: -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type))hci_uart_set_flow_control (hu, false); }@@ -1201,7 +1201,7 @@ static int qca_setup(struct hci_uart *hu)/* Patch downloading has to be done without IBS mode */ clear_bit (STATE_IN_BAND_SLEEP_ENABLED , &qca->flags); -if (soc_type ==QCA_WCN3990 ) { +if (qca_is_wcn399x (soc_type)) {bt_dev_info (hdev,"setting up wcn3990" );/* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute @@ -1232,7 +1232,7 @@ static int qca_setup(struct hci_uart *hu) qca_baudrate =qca_get_baudrate_value (speed); } -if (soc_type !=QCA_WCN3990 ) { +if (!qca_is_wcn399x (soc_type)) {/* Get QCA version information */ ret =qca_read_soc_version (hdev, &soc_ver);if (ret)@@ -1257,7 +1257,7 @@ static int qca_setup(struct hci_uart *hu) }/* Setup bdaddr */ -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type)) hu->hdev->set_bdaddr = qca_set_bdaddr;else hu->hdev->set_bdaddr = qca_set_bdaddr_rome;@@ -1280,7 +1280,7 @@ static int qca_setup(struct hci_uart *hu) .dequeue = qca_dequeue, }; -static const struct qca_vreg_data qca_soc_data = { +static const struct qca_vreg_data qca_soc_data_wcn3990 = { .soc_type =QCA_WCN3990 , .vregs = (struct qca_vreg []) { {"vddio" ,1800000 ,1900000 ,15000 },@@ -1291,6 +1291,17 @@ static int qca_setup(struct hci_uart *hu) .num_vregs = 4, }; +static const struct qca_vreg_data qca_soc_data_wcn3998 = { + .soc_type =QCA_WCN3998 , + .vregs = (struct qca_vreg []) { + {"vddio" ,1800000 ,1900000 ,10000 }, + {"vddxo" ,1800000 ,1900000 ,80000 }, + {"vddrf" ,1300000 ,1352000 ,300000 }, + {"vddch0" ,3300000 ,3300000 ,450000 }, + }, + .num_vregs =4 , +}; +static void qca_power_shutdown (struct hci_uart *hu) {struct qca_data *qca = hu->priv;@@ -1424,8 +1435,8 @@ static int qca_serdev_probe(struct serdev_device *serdev) qcadev->serdev_hu.serdev = serdev; data =of_device_get_match_data (&serdev->dev);serdev_device_set_drvdata (serdev, qcadev); -if (data && data->soc_type ==QCA_WCN3990 ) { - qcadev->btsoc_type =QCA_WCN3990 ; +if (data &&qca_is_wcn399x (data->soc_type)) { + qcadev->btsoc_type = data->soc_type; qcadev->bt_power =devm_kzalloc (&serdev->dev,sizeof (struct qca_power ),GFP_KERNEL );@@ -1489,7 +1500,7 @@ static void qca_serdev_remove(struct serdev_device *serdev) {struct qca_serdev *qcadev =serdev_device_get_drvdata (serdev); -if (qcadev->btsoc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (qcadev->btsoc_type))qca_power_shutdown (&qcadev->serdev_hu);else clk_disable_unprepare (qcadev->susclk);
drivers/bluetooth/hci_qca.c static void qca_serdev_remove(struct serdev_device *serdev) · line 1517
Quoted 9 lines
drivers/bluetooth/hci_qca.c +2
-1@@ -1499,7 +1510,8 @@ static void qca_serdev_remove(struct serdev_device *serdev)static const struct of_device_id qca_bluetooth_of_match[] = { { .compatible ="qcom,qca6174-bt" }, - { .compatible ="qcom,wcn3990-bt" , .data = &qca_soc_data}, + { .compatible ="qcom,wcn3990-bt" , .data = &qca_soc_data_wcn3990}, + { .compatible ="qcom,wcn3998-bt" , .data = &qca_soc_data_wcn3998}, {/* sentinel */ } };MODULE_DEVICE_TABLE (of, qca_bluetooth_of_match);
A suggestion for patch submission: it is often good to wait a few days before sending a new revision to give other reviewers time to comment. Reviewers may disagree with each other, this can then often be sorted out on the mailing list, rather than changing the code back and forth. Also it may save you a revision or two.
That said, there are no hard rules and there is nothing wrong with being responsive, especially when bugs are pointed out. Just something to keep in mind and consider on a per patch/revision basis :)
Cheers
Matthias
Re: [PATCH v6 1/2] Bluetooth: hci_qca: Added support for WCN3998
Hi Matthias,
Quoted 11 lines · Matthias Kaehlcke
Quoted 5 lines · Harish Bandi
Added new compatible for WCN3998 and corresponding voltage and current values to WCN3998 compatible.
Changed driver code to support WCN3998Signed-off-by Harish Bandi <[email protected]>You forgot to add 'Reviewed-by' my tag from v5. No need to resend, I'll add it again below, but it's the general practice to include tags like 'Reviewed-by' or 'Acked-by' when sending a new revision.
[Harish] - sorry for missing, will follow from new version.
Quoted 244 lines
Quoted 234 lines
---
Changes in V6:
- changed return value to false in the qca_is_wcn399x()stub--- drivers/bluetooth/btqca.c | 13 +++++++++++-- drivers/bluetooth/btqca.h | 8 +++++++- drivers/bluetooth/hci_qca.c | 40 ++++++++++++++++++++++++++-------------- 3 files changed, 44 insertions(+), 17 deletions(-)drivers/bluetooth/btqca.c +1
-1@@ -344,7 +344,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,/* Download rampatch file */ config.type =TLV_TYPE_PATCH ; -if (soc_type ==QCA_WCN3990 ) { +if (qca_is_wcn399x (soc_type)) {/* Firmware files to download are based on ROM version. * ROM version is derived from last two bytes of soc_ver. drivers/bluetooth/btqca.c +1
-1*/ @@ -365,7 +365,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,/* Download NVM configuration */ config.type =TLV_TYPE_NVM ; -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type))snprintf (config.fwname,sizeof (config.fwname),"qca/crnv%02x.bin" , rom_ver);drivers/bluetooth/btqca.c +9
-0else @@ -410,6 +410,15 @@ int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) }EXPORT_SYMBOL_GPL (qca_set_bdaddr); +bool qca_is_wcn399x (enum qca_btsoc_type soc_type) +{ +if ((soc_type ==QCA_WCN3990 ) || (soc_type ==QCA_WCN3998 )) +return true; + +return false; +} +EXPORT_SYMBOL_GPL (qca_is_wcn399x); +MODULE_AUTHOR ("Ben Young Tae Kim <[email protected]>" ); MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver" VERSION);
MODULE_VERSION(VERSION);drivers/bluetooth/btqca.h +3
-1@@ -132,7 +132,8 @@ enum qca_btsoc_type {QCA_INVALID =-1 ,QCA_AR3002 ,QCA_ROME , - QCA_WCN3990 +QCA_WCN3990 , + QCA_WCN3998, };#if IS_ENABLED (CONFIG_BT_QCA )@@ -142,6 +143,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, enum qca_btsoc_type soc_type, u32 soc_ver);int qca_read_soc_version (struct hci_dev *hdev,u32 *soc_version);int qca_set_bdaddr (struct hci_dev *hdev,const bdaddr_t *bdaddr); +bool qca_is_wcn399x (enum qca_btsoc_type soc_type);#else static inline int qca_set_bdaddr_rome(struct
hci_dev*hdev, constbdaddr_t*bdaddr)drivers/bluetooth/btqca.h +4
-0@@ -165,4 +167,8 @@ static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)return -EOPNOTSUPP ; } +static inline bool qca_is_wcn399x (enum qca_btsoc_type soc_type) +{ +return false; +}#endif
drivers/bluetooth/hci_qca.c +3
-3@@ -521,7 +521,7 @@ static int qca_open(struct hci_uart *hu)if (hu->serdev) { qcadev =serdev_device_get_drvdata (hu->serdev); -if (qcadev->btsoc_type !=QCA_WCN3990 ) { +if (!qca_is_wcn399x (qcadev->btsoc_type)) {gpiod_set_value_cansleep (qcadev->bt_en,1 ); }else { hu->init_speed = qcadev->init_speed;@@ -627,7 +627,7 @@ static int qca_close(struct hci_uart *hu)if (hu->serdev) { qcadev =serdev_device_get_drvdata (hu->serdev); -if (qcadev->btsoc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (qcadev->btsoc_type))qca_power_shutdown (hu);else gpiod_set_value_cansleep (qcadev->bt_en,0 );@@ -1008,7 +1008,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate) msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));/* Give the controller time to process the request */ -if (qca_soc_type (hu) ==QCA_WCN3990 ) +if (qca_is_wcn399x (qca_soc_type (hu)))msleep (10 );else drivers/bluetooth/hci_qca.c +1
-1msleep (300 );@@ -1084,7 +1084,7 @@ static unsigned int qca_get_speed(structhci_uart *hu, static int qca_check_speeds(struct hci_uart *hu) { - if (qca_soc_type(hu) == QCA_WCN3990) { + if (qca_is_wcn399x(qca_soc_type(hu))) { if (!qca_get_speed(hu, QCA_INIT_SPEED) && !qca_get_speed(hu, QCA_OPER_SPEED))drivers/bluetooth/hci_qca.c +1
-1return -EINVAL ;@@ -1116,7 +1116,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)/* Disable flow control for wcn3990 to deassert RTS while * changing the baudrate of chip and host. */ -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type))hci_uart_set_flow_control (hu, true);drivers/bluetooth/hci_qca.c +18
-7qca_baudrate =qca_get_baudrate_value (speed);@@ -1128,7 +1128,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)host_set_baudrate (hu ,speed ); error: -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type))hci_uart_set_flow_control (hu, false); }@@ -1201,7 +1201,7 @@ static int qca_setup(struct hci_uart *hu)/* Patch downloading has to be done without IBS mode */ clear_bit (STATE_IN_BAND_SLEEP_ENABLED , &qca->flags); -if (soc_type ==QCA_WCN3990 ) { +if (qca_is_wcn399x (soc_type)) {bt_dev_info (hdev,"setting up wcn3990" );/* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute @@ -1232,7 +1232,7 @@ static int qca_setup(struct hci_uart *hu) qca_baudrate =qca_get_baudrate_value (speed); } -if (soc_type !=QCA_WCN3990 ) { +if (!qca_is_wcn399x (soc_type)) {/* Get QCA version information */ ret =qca_read_soc_version (hdev, &soc_ver);if (ret)@@ -1257,7 +1257,7 @@ static int qca_setup(struct hci_uart *hu) }/* Setup bdaddr */ -if (soc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (soc_type)) hu->hdev->set_bdaddr = qca_set_bdaddr;else hu->hdev->set_bdaddr = qca_set_bdaddr_rome;@@ -1280,7 +1280,7 @@ static int qca_setup(struct hci_uart *hu) .dequeue = qca_dequeue, }; -static const struct qca_vreg_data qca_soc_data = { +static const struct qca_vreg_data qca_soc_data_wcn3990 = { .soc_type =QCA_WCN3990 , .vregs = (struct qca_vreg []) { {"vddio" ,1800000 ,1900000 ,15000 },@@ -1291,6 +1291,17 @@ static int qca_setup(struct hci_uart *hu) .num_vregs = 4, }; +static const struct qca_vreg_data qca_soc_data_wcn3998 = { + .soc_type =QCA_WCN3998 , + .vregs = (struct qca_vreg []) { + {"vddio" ,1800000 ,1900000 ,10000 }, + {"vddxo" ,1800000 ,1900000 ,80000 }, + {"vddrf" ,1300000 ,1352000 ,300000 }, + {"vddch0" ,3300000 ,3300000 ,450000 }, + }, + .num_vregs =4 , +}; +static void qca_power_shutdown (struct hci_uart *hu) {struct qca_data *qca = hu->priv;@@ -1424,8 +1435,8 @@ static int qca_serdev_probe(struct serdev_device *serdev) qcadev->serdev_hu.serdev = serdev; data =of_device_get_match_data (&serdev->dev);serdev_device_set_drvdata (serdev, qcadev); -if (data && data->soc_type ==QCA_WCN3990 ) { - qcadev->btsoc_type =QCA_WCN3990 ; +if (data &&qca_is_wcn399x (data->soc_type)) { + qcadev->btsoc_type = data->soc_type; qcadev->bt_power = devm_kzalloc(&serdev->dev, sizeof(struct qca_power),drivers/bluetooth/hci_qca.c +1
-1GFP_KERNEL);@@ -1489,7 +1500,7 @@ static void qca_serdev_remove(struct serdev_device *serdev) {struct qca_serdev *qcadev =serdev_device_get_drvdata (serdev); -if (qcadev->btsoc_type ==QCA_WCN3990 ) +if (qca_is_wcn399x (qcadev->btsoc_type))qca_power_shutdown (&qcadev->serdev_hu);else drivers/bluetooth/hci_qca.c +2
-1clk_disable_unprepare (qcadev->susclk);@@ -1499,7 +1510,8 @@ static void qca_serdev_remove(struct serdev_device *serdev)static const struct of_device_id qca_bluetooth_of_match[] = { { .compatible ="qcom,qca6174-bt" }, - { .compatible ="qcom,wcn3990-bt" , .data = &qca_soc_data}, + { .compatible ="qcom,wcn3990-bt" , .data = &qca_soc_data_wcn3990}, + { .compatible ="qcom,wcn3998-bt" , .data = &qca_soc_data_wcn3998}, {/* sentinel */ } };Quoted 1 line
MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);Reviewed-by Matthias Kaehlcke <[email protected]>A suggestion for patch submission: it is often good to wait a few days before sending a new revision to give other reviewers time to comment. Reviewers may disagree with each other, this can then often be sorted out on the mailing list, rather than changing the code back and forth. Also it may save you a revision or two.
Quoted 4 lines
That said, there are no hard rules and there is nothing wrong with being responsive, especially when bugs are pointed out. Just something to keep in mind and consider on a per patch/revision basis :)
[Harish] - Sure.
Quoted 3 lines
Cheers
Matthias
kbuild test robot
build botRe: [PATCH v6 1/2] Bluetooth: hci_qca: Added support for WCN3998
In reply to Harish BandiThank you for the patch! Perhaps something to improve:
Hi Harish,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on bluetooth-next/master]
[also build test WARNING on next-20190328]
[cannot apply to v5.1-rc2]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Harish-Bandi/Bluetooth-hci_qca-Added-support-for-WCN3998/20190328-213357 base: https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git master config: riscv-allmodconfig (attached as .config) compiler: riscv64-linux-gcc (GCC) 8.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=8.1.0 make.cross ARCH=riscv
Note: it may well be a FALSE warning. FWIW you are at least aware of it now.
http://gcc.gnu.org/wiki/Better_Uninitialized_Warnings
All warnings (new ones prefixed by >>):
drivers/bluetooth/btqca.c: In function 'qca_uart_setup':
>> drivers/bluetooth/btqca.c:369:3: warning: 'rom_ver' may be used uninitialized in this function [-Wmaybe-uninitialized]
snprintf(config.fwname, sizeof(config.fwname),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"qca/crnv%02x.bin", rom_ver);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~vim +/rom_ver +369 drivers/bluetooth/btqca.c
83e81961 Ben Young Tae Kim 2015-08-10 333
aadebac4 Balakrishna Godavarthi 2018-08-03 334 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
aadebac4 Balakrishna Godavarthi 2018-08-03 335 enum qca_btsoc_type soc_type, u32 soc_ver)
83e81961 Ben Young Tae Kim 2015-08-10 336 {
83e81961 Ben Young Tae Kim 2015-08-10 337 struct rome_config config;
83e81961 Ben Young Tae Kim 2015-08-10 338 int err;
4219d468 Balakrishna Godavarthi 2018-08-03 339 u8 rom_ver;
83e81961 Ben Young Tae Kim 2015-08-10 340
ba493d4f Balakrishna Godavarthi 2018-08-03 341 bt_dev_dbg(hdev, "QCA setup on UART");
83e81961 Ben Young Tae Kim 2015-08-10 342
83e81961 Ben Young Tae Kim 2015-08-10 343 config.user_baud_rate = baudrate;
83e81961 Ben Young Tae Kim 2015-08-10 344
83e81961 Ben Young Tae Kim 2015-08-10 345 /* Download rampatch file */
83e81961 Ben Young Tae Kim 2015-08-10 346 config.type = TLV_TYPE_PATCH;
cc8a70bd Harish Bandi 2019-03-27 347 if (qca_is_wcn399x(soc_type)) {
4219d468 Balakrishna Godavarthi 2018-08-03 348 /* Firmware files to download are based on ROM version.
4219d468 Balakrishna Godavarthi 2018-08-03 349 * ROM version is derived from last two bytes of soc_ver.
4219d468 Balakrishna Godavarthi 2018-08-03 350 */
4219d468 Balakrishna Godavarthi 2018-08-03 351 rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
4219d468 Balakrishna Godavarthi 2018-08-03 352 (soc_ver & 0x0000000f);
4219d468 Balakrishna Godavarthi 2018-08-03 353 snprintf(config.fwname, sizeof(config.fwname),
4219d468 Balakrishna Godavarthi 2018-08-03 354 "qca/crbtfw%02x.tlv", rom_ver);
4219d468 Balakrishna Godavarthi 2018-08-03 355 } else {
4219d468 Balakrishna Godavarthi 2018-08-03 356 snprintf(config.fwname, sizeof(config.fwname),
4219d468 Balakrishna Godavarthi 2018-08-03 357 "qca/rampatch_%08x.bin", soc_ver);
4219d468 Balakrishna Godavarthi 2018-08-03 358 }
4219d468 Balakrishna Godavarthi 2018-08-03 359
ba493d4f Balakrishna Godavarthi 2018-08-03 360 err = qca_download_firmware(hdev, &config);
83e81961 Ben Young Tae Kim 2015-08-10 361 if (err < 0) {
ba493d4f Balakrishna Godavarthi 2018-08-03 362 bt_dev_err(hdev, "QCA Failed to download patch (%d)", err);
83e81961 Ben Young Tae Kim 2015-08-10 363 return err;
83e81961 Ben Young Tae Kim 2015-08-10 364 }
83e81961 Ben Young Tae Kim 2015-08-10 365
83e81961 Ben Young Tae Kim 2015-08-10 366 /* Download NVM configuration */
83e81961 Ben Young Tae Kim 2015-08-10 367 config.type = TLV_TYPE_NVM;
cc8a70bd Harish Bandi 2019-03-27 368 if (qca_is_wcn399x(soc_type))
4219d468 Balakrishna Godavarthi 2018-08-03 @369 snprintf(config.fwname, sizeof(config.fwname),
4219d468 Balakrishna Godavarthi 2018-08-03 370 "qca/crnv%02x.bin", rom_ver);
4219d468 Balakrishna Godavarthi 2018-08-03 371 else
4219d468 Balakrishna Godavarthi 2018-08-03 372 snprintf(config.fwname, sizeof(config.fwname),
4219d468 Balakrishna Godavarthi 2018-08-03 373 "qca/nvm_%08x.bin", soc_ver);
4219d468 Balakrishna Godavarthi 2018-08-03 374
ba493d4f Balakrishna Godavarthi 2018-08-03 375 err = qca_download_firmware(hdev, &config);
83e81961 Ben Young Tae Kim 2015-08-10 376 if (err < 0) {
ba493d4f Balakrishna Godavarthi 2018-08-03 377 bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);
83e81961 Ben Young Tae Kim 2015-08-10 378 return err;
83e81961 Ben Young Tae Kim 2015-08-10 379 }
83e81961 Ben Young Tae Kim 2015-08-10 380
83e81961 Ben Young Tae Kim 2015-08-10 381 /* Perform HCI reset */
ba493d4f Balakrishna Godavarthi 2018-08-03 382 err = qca_send_reset(hdev);
83e81961 Ben Young Tae Kim 2015-08-10 383 if (err < 0) {
ba493d4f Balakrishna Godavarthi 2018-08-03 384 bt_dev_err(hdev, "QCA Failed to run HCI_RESET (%d)", err);
83e81961 Ben Young Tae Kim 2015-08-10 385 return err;
83e81961 Ben Young Tae Kim 2015-08-10 386 }
83e81961 Ben Young Tae Kim 2015-08-10 387
ba493d4f Balakrishna Godavarthi 2018-08-03 388 bt_dev_info(hdev, "QCA setup on UART is completed");
83e81961 Ben Young Tae Kim 2015-08-10 389
83e81961 Ben Young Tae Kim 2015-08-10 390 return 0;
83e81961 Ben Young Tae Kim 2015-08-10 391 }
ba493d4f Balakrishna Godavarthi 2018-08-03 392 EXPORT_SYMBOL_GPL(qca_uart_setup);
83e81961 Ben Young Tae Kim 2015-08-10 393 :::::: The code at line 369 was first introduced by commit
:::::: 4219d4686875fdd83df3da00fda5ff0551e0a2d7 Bluetooth: btqca: Add wcn3990 firmware download support.
:::::: TO: Balakrishna Godavarthi <[email protected]> :::::: CC: Marcel Holtmann <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Re: [PATCH v6 1/2] Bluetooth: hci_qca: Added support for WCN3998
Quoted 33 lines · kbuild test robot
Hi Harish,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on bluetooth-next/master]
[also build test WARNING on next-20190328]
[cannot apply to v5.1-rc2]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]url: https://github.com/0day-ci/linux/commits/Harish-Bandi/Bluetooth-hci_qca-Added-support-for-WCN3998/20190328-213357 base: https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git master config: riscv-allmodconfig (attached as .config) compiler: riscv64-linux-gcc (GCC) 8.1.0reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=8.1.0 make.cross ARCH=riscvNote: it may well be a FALSE warning. FWIW you are at least aware of it now.
http://gcc.gnu.org/wiki/Better_Uninitialized_WarningsAll warnings (new ones prefixed by >>):
drivers/bluetooth/btqca.c: In function 'qca_uart_setup':Quoted 1 line
Quoted 1 line
drivers/bluetooth/btqca.c:369:3: warning: 'rom_ver' may be used uninitialized in this function [-Wmaybe-uninitialized]snprintf(config.fwname, sizeof(config.fwname), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "qca/crnv%02x.bin", rom_ver); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~vim +/rom_ver +369
drivers/bluetooth/btqca.c
Quoted 7 lines
83e81961 Ben Young Tae Kim 2015-08-10 333
aadebac4 Balakrishna Godavarthi 2018-08-03 334 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
aadebac4 Balakrishna Godavarthi 2018-08-03 335 enum qca_btsoc_type soc_type, u32 soc_ver)
83e81961 Ben Young Tae Kim 2015-08-10 336 {
83e81961 Ben Young Tae Kim 2015-08-10 337 struct rome_config config;
83e81961 Ben Young Tae Kim 2015-08-10 338 int err;
4219d468 Balakrishna Godavarthi 2018-08-03 339 u8 rom_ver;With the use of qca_is_wcn399x() the compiler can't determine anymore that rom_ver is only read for WCN399x, in which case it is also initialized. Just initialize rom_ver with 0 to keep the compiler happy.
Quoted 64 lines
83e81961 Ben Young Tae Kim 2015-08-10 340 ba493d4f Balakrishna Godavarthi 2018-08-03 341 bt_dev_dbg(hdev, "QCA setup on UART"); 83e81961 Ben Young Tae Kim 2015-08-10 342 83e81961 Ben Young Tae Kim 2015-08-10 343 config.user_baud_rate = baudrate; 83e81961 Ben Young Tae Kim 2015-08-10 344 83e81961 Ben Young Tae Kim 2015-08-10 345 /* Download rampatch file */ 83e81961 Ben Young Tae Kim 2015-08-10 346 config.type = TLV_TYPE_PATCH; cc8a70bd Harish Bandi 2019-03-27 347 if (qca_is_wcn399x(soc_type)) { 4219d468 Balakrishna Godavarthi 2018-08-03 348 /* Firmware files to download are based on ROM version. 4219d468 Balakrishna Godavarthi 2018-08-03 349 * ROM version is derived from last two bytes of soc_ver. 4219d468 Balakrishna Godavarthi 2018-08-03 350 */ 4219d468 Balakrishna Godavarthi 2018-08-03 351 rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | 4219d468 Balakrishna Godavarthi 2018-08-03 352 (soc_ver & 0x0000000f); 4219d468 Balakrishna Godavarthi 2018-08-03 353 snprintf(config.fwname, sizeof(config.fwname), 4219d468 Balakrishna Godavarthi 2018-08-03 354 "qca/crbtfw%02x.tlv", rom_ver); 4219d468 Balakrishna Godavarthi 2018-08-03 355 } else { 4219d468 Balakrishna Godavarthi 2018-08-03 356 snprintf(config.fwname, sizeof(config.fwname), 4219d468 Balakrishna Godavarthi 2018-08-03 357 "qca/rampatch_%08x.bin", soc_ver); 4219d468 Balakrishna Godavarthi 2018-08-03 358 } 4219d468 Balakrishna Godavarthi 2018-08-03 359 ba493d4f Balakrishna Godavarthi 2018-08-03 360 err = qca_download_firmware(hdev, &config); 83e81961 Ben Young Tae Kim 2015-08-10 361 if (err < 0) { ba493d4f Balakrishna Godavarthi 2018-08-03 362 bt_dev_err(hdev, "QCA Failed to download patch (%d)", err); 83e81961 Ben Young Tae Kim 2015-08-10 363 return err; 83e81961 Ben Young Tae Kim 2015-08-10 364 } 83e81961 Ben Young Tae Kim 2015-08-10 365 83e81961 Ben Young Tae Kim 2015-08-10 366 /* Download NVM configuration */ 83e81961 Ben Young Tae Kim 2015-08-10 367 config.type = TLV_TYPE_NVM; cc8a70bd Harish Bandi 2019-03-27 368 if (qca_is_wcn399x(soc_type)) 4219d468 Balakrishna Godavarthi 2018-08-03 @369 snprintf(config.fwname, sizeof(config.fwname), 4219d468 Balakrishna Godavarthi 2018-08-03 370 "qca/crnv%02x.bin", rom_ver); 4219d468 Balakrishna Godavarthi 2018-08-03 371 else 4219d468 Balakrishna Godavarthi 2018-08-03 372 snprintf(config.fwname, sizeof(config.fwname), 4219d468 Balakrishna Godavarthi 2018-08-03 373 "qca/nvm_%08x.bin", soc_ver); 4219d468 Balakrishna Godavarthi 2018-08-03 374 ba493d4f Balakrishna Godavarthi 2018-08-03 375 err = qca_download_firmware(hdev, &config); 83e81961 Ben Young Tae Kim 2015-08-10 376 if (err < 0) { ba493d4f Balakrishna Godavarthi 2018-08-03 377 bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err); 83e81961 Ben Young Tae Kim 2015-08-10 378 return err; 83e81961 Ben Young Tae Kim 2015-08-10 379 } 83e81961 Ben Young Tae Kim 2015-08-10 380 83e81961 Ben Young Tae Kim 2015-08-10 381 /* Perform HCI reset */ ba493d4f Balakrishna Godavarthi 2018-08-03 382 err = qca_send_reset(hdev); 83e81961 Ben Young Tae Kim 2015-08-10 383 if (err < 0) { ba493d4f Balakrishna Godavarthi 2018-08-03 384 bt_dev_err(hdev, "QCA Failed to run HCI_RESET (%d)", err); 83e81961 Ben Young Tae Kim 2015-08-10 385 return err; 83e81961 Ben Young Tae Kim 2015-08-10 386 } 83e81961 Ben Young Tae Kim 2015-08-10 387 ba493d4f Balakrishna Godavarthi 2018-08-03 388 bt_dev_info(hdev, "QCA setup on UART is completed"); 83e81961 Ben Young Tae Kim 2015-08-10 389 83e81961 Ben Young Tae Kim 2015-08-10 390 return 0; 83e81961 Ben Young Tae Kim 2015-08-10 391 } ba493d4f Balakrishna Godavarthi 2018-08-03 392 EXPORT_SYMBOL_GPL(qca_uart_setup); 83e81961 Ben Young Tae Kim 2015-08-10 393:::::: The code at line 369 was first introduced by commit
::::::4219d4686875fdd83df3da00fda5ff0551e0a2d7Bluetooth: btqca: Add wcn3990 firmware download support.:::::: TO: Balakrishna Godavarthi <[email protected]> :::::: CC: Marcel Holtmann <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Re: [PATCH v6 1/2] Bluetooth: hci_qca: Added support for WCN3998
Hi Matthias,
Quoted 44 lines · Matthias Kaehlcke
Quoted 35 lines · kbuild test robot
Hi Harish,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on bluetooth-next/master]
[also build test WARNING on next-20190328]
[cannot apply to v5.1-rc2]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]url: https://github.com/0day-ci/linux/commits/Harish-Bandi/Bluetooth-hci_qca-Added-support-for-WCN3998/20190328-213357 base: https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git master config: riscv-allmodconfig (attached as .config) compiler: riscv64-linux-gcc (GCC) 8.1.0reproduce:
wget
https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
-O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree GCC_VERSION=8.1.0 make.cross ARCH=riscvNote: it may well be a FALSE warning. FWIW you are at least aware of it now.
http://gcc.gnu.org/wiki/Better_Uninitialized_WarningsAll warnings (new ones prefixed by >>):
drivers/bluetooth/btqca.c: In function 'qca_uart_setup':Quoted 1 line
Quoted 1 line
drivers/bluetooth/btqca.c:369:3: warning: 'rom_ver' may be used uninitialized in this function [-Wmaybe-uninitialized]snprintf(config.fwname, sizeof(config.fwname), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "qca/crnv%02x.bin", rom_ver); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~vim +/rom_ver +369
drivers/bluetooth/btqca.cQuoted 7 lines
83e81961 Ben Young Tae Kim 2015-08-10 333 aadebac4 Balakrishna Godavarthi 2018-08-03 334 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, aadebac4 Balakrishna Godavarthi 2018-08-03 335 enum qca_btsoc_type soc_type, u32 soc_ver) 83e81961 Ben Young Tae Kim 2015-08-10 336 { 83e81961 Ben Young Tae Kim 2015-08-10 337 struct rome_config config; 83e81961 Ben Young Tae Kim 2015-08-10 338 int err; 4219d468 Balakrishna Godavarthi 2018-08-03 339 u8 rom_ver;
Quoted 4 lines
With the use of
qca_is_wcn399x()the compiler can't determine anymore thatrom_veris only read for WCN399x, in which case it is also initialized. Just initializerom_verwith 0 to keep the compiler happy.
[Harish] - sure, will wait for few more comments and address all comments in new patch version.
Quoted 63 lines
Quoted 63 lines
83e81961 Ben Young Tae Kim 2015-08-10 340 ba493d4f Balakrishna Godavarthi 2018-08-03 341 bt_dev_dbg(hdev, "QCA setup on UART"); 83e81961 Ben Young Tae Kim 2015-08-10 342 83e81961 Ben Young Tae Kim 2015-08-10 343 config.user_baud_rate = baudrate; 83e81961 Ben Young Tae Kim 2015-08-10 344 83e81961 Ben Young Tae Kim 2015-08-10 345 /* Download rampatch file */ 83e81961 Ben Young Tae Kim 2015-08-10 346 config.type = TLV_TYPE_PATCH; cc8a70bd Harish Bandi 2019-03-27 347 if (qca_is_wcn399x(soc_type)) { 4219d468 Balakrishna Godavarthi 2018-08-03 348 /* Firmware files to download are based on ROM version. 4219d468 Balakrishna Godavarthi 2018-08-03 349 * ROM version is derived from last two bytes of soc_ver. 4219d468 Balakrishna Godavarthi 2018-08-03 350 */ 4219d468 Balakrishna Godavarthi 2018-08-03 351 rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | 4219d468 Balakrishna Godavarthi 2018-08-03 352 (soc_ver & 0x0000000f); 4219d468 Balakrishna Godavarthi 2018-08-03 353 snprintf(config.fwname, sizeof(config.fwname), 4219d468 Balakrishna Godavarthi 2018-08-03 354 "qca/crbtfw%02x.tlv", rom_ver); 4219d468 Balakrishna Godavarthi 2018-08-03 355 } else { 4219d468 Balakrishna Godavarthi 2018-08-03 356 snprintf(config.fwname, sizeof(config.fwname), 4219d468 Balakrishna Godavarthi 2018-08-03 357 "qca/rampatch_%08x.bin", soc_ver); 4219d468 Balakrishna Godavarthi 2018-08-03 358 } 4219d468 Balakrishna Godavarthi 2018-08-03 359 ba493d4f Balakrishna Godavarthi 2018-08-03 360 err = qca_download_firmware(hdev, &config); 83e81961 Ben Young Tae Kim 2015-08-10 361 if (err < 0) { ba493d4f Balakrishna Godavarthi 2018-08-03 362 bt_dev_err(hdev, "QCA Failed to download patch (%d)", err); 83e81961 Ben Young Tae Kim 2015-08-10 363 return err; 83e81961 Ben Young Tae Kim 2015-08-10 364 } 83e81961 Ben Young Tae Kim 2015-08-10 365 83e81961 Ben Young Tae Kim 2015-08-10 366 /* Download NVM configuration */ 83e81961 Ben Young Tae Kim 2015-08-10 367 config.type = TLV_TYPE_NVM; cc8a70bd Harish Bandi 2019-03-27 368 if (qca_is_wcn399x(soc_type)) 4219d468 Balakrishna Godavarthi 2018-08-03 @369 snprintf(config.fwname, sizeof(config.fwname), 4219d468 Balakrishna Godavarthi 2018-08-03 370 "qca/crnv%02x.bin", rom_ver); 4219d468 Balakrishna Godavarthi 2018-08-03 371 else 4219d468 Balakrishna Godavarthi 2018-08-03 372 snprintf(config.fwname, sizeof(config.fwname), 4219d468 Balakrishna Godavarthi 2018-08-03 373 "qca/nvm_%08x.bin", soc_ver); 4219d468 Balakrishna Godavarthi 2018-08-03 374 ba493d4f Balakrishna Godavarthi 2018-08-03 375 err = qca_download_firmware(hdev, &config); 83e81961 Ben Young Tae Kim 2015-08-10 376 if (err < 0) { ba493d4f Balakrishna Godavarthi 2018-08-03 377 bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err); 83e81961 Ben Young Tae Kim 2015-08-10 378 return err; 83e81961 Ben Young Tae Kim 2015-08-10 379 } 83e81961 Ben Young Tae Kim 2015-08-10 380 83e81961 Ben Young Tae Kim 2015-08-10 381 /* Perform HCI reset */ ba493d4f Balakrishna Godavarthi 2018-08-03 382 err = qca_send_reset(hdev); 83e81961 Ben Young Tae Kim 2015-08-10 383 if (err < 0) { ba493d4f Balakrishna Godavarthi 2018-08-03 384 bt_dev_err(hdev, "QCA Failed to run HCI_RESET (%d)", err); 83e81961 Ben Young Tae Kim 2015-08-10 385 return err; 83e81961 Ben Young Tae Kim 2015-08-10 386 } 83e81961 Ben Young Tae Kim 2015-08-10 387 ba493d4f Balakrishna Godavarthi 2018-08-03 388 bt_dev_info(hdev, "QCA setup on UART is completed"); 83e81961 Ben Young Tae Kim 2015-08-10 389 83e81961 Ben Young Tae Kim 2015-08-10 390 return 0; 83e81961 Ben Young Tae Kim 2015-08-10 391 } ba493d4f Balakrishna Godavarthi 2018-08-03 392 EXPORT_SYMBOL_GPL(qca_uart_setup); 83e81961 Ben Young Tae Kim 2015-08-10 393:::::: The code at line 369 was first introduced by commit
::::::4219d4686875fdd83df3da00fda5ff0551e0a2d7Bluetooth: btqca: Add wcn3990 firmware download support.
Quoted 6 lines
Quoted 6 lines
:::::: TO: Balakrishna Godavarthi <[email protected]> :::::: CC: Marcel Holtmann <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Thanks,
Harish
Doubt/issue in hci_dev_do_close
Hi Marcel/Bluetooth Maintainers,
In hci_dev_do_close first it is sending vendor specific shutdown routine and then after some operations it is sending the hci_reset command.
However in vendor specific shutdown routine if vendor already powered off the vendor chip. In those cases it will not send the HCI_RESET command. That may lead to bug or some cleanup operations not done properly in Chip. Is there any specific reason why it is sending vendor specific shutdown routine first and then sending HCI_RESET command.
int hci_dev_do_close(struct hci_dev *hdev)
{
bool auto_off;
BT_DBG("%s %p", hdev->name, hdev);
if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
test_bit(HCI_UP, &hdev->flags)) {
/* Execute vendor specific shutdown routine */
if (hdev->shutdown)
hdev->shutdown(hdev);
}
cancel_delayed_work(&hdev->power_off);
hci_request_cancel_all(hdev);
hci_req_sync_lock(hdev);
if (!test_and_clear_bit(HCI_UP, &hdev->flags)) {
cancel_delayed_work_sync(&hdev->cmd_timer);
hci_req_sync_unlock(hdev);
return 0;
}
hci_leds_update_powered(hdev, false);
/* Flush RX and TX works */
flush_work(&hdev->tx_work);
flush_work(&hdev->rx_work);
if (hdev->discov_timeout > 0) {
hdev->discov_timeout = 0;
hci_dev_clear_flag(hdev, HCI_DISCOVERABLE);
hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE);
}
if (hci_dev_test_and_clear_flag(hdev, HCI_SERVICE_CACHE))
cancel_delayed_work(&hdev->service_cache);
if (hci_dev_test_flag(hdev, HCI_MGMT)) {
struct adv_info *adv_instance;
cancel_delayed_work_sync(&hdev->rpa_expired);
list_for_each_entry(adv_instance, &hdev->adv_instances, list)
cancel_delayed_work_sync(&adv_instance->rpa_expired_cb);
}
/* Avoid potential lockdep warnings from the *_flush() calls by
* ensuring the workqueue is empty up front.
*/
drain_workqueue(hdev->workqueue);
hci_dev_lock(hdev);
hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
auto_off = hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF);
if (!auto_off && hdev->dev_type == HCI_PRIMARY &&
!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
hci_dev_test_flag(hdev, HCI_MGMT))
__mgmt_power_off(hdev);
hci_inquiry_cache_flush(hdev);
hci_pend_le_actions_clear(hdev);
hci_conn_hash_flush(hdev);
hci_dev_unlock(hdev);
smp_unregister(hdev);
hci_sock_dev_event(hdev, HCI_DEV_DOWN);
if (hdev->flush)
hdev->flush(hdev);
/* Reset device */
skb_queue_purge(&hdev->cmd_q);
atomic_set(&hdev->cmd_cnt, 1);
if (test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks) &&
!auto_off && !hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
set_bit(HCI_INIT, &hdev->flags);
__hci_req_sync(hdev, hci_reset_req, 0, HCI_CMD_TIMEOUT, NULL);
clear_bit(HCI_INIT, &hdev->flags);
}
/* flush cmd work */
flush_work(&hdev->cmd_work);
/* Drop queues */
skb_queue_purge(&hdev->rx_q);
skb_queue_purge(&hdev->cmd_q);
skb_queue_purge(&hdev->raw_q);
/* Drop last sent command */
if (hdev->sent_cmd) {
cancel_delayed_work_sync(&hdev->cmd_timer);
kfree_skb(hdev->sent_cmd);
hdev->sent_cmd = NULL;
}
clear_bit(HCI_RUNNING, &hdev->flags);
hci_sock_dev_event(hdev, HCI_DEV_CLOSE);
/* After this point our queues are empty
* and no tasks are scheduled. */
hdev->close(hdev);
/* Clear flags */
hdev->flags &= BIT(HCI_RAW);
hci_dev_clear_volatile_flags(hdev);
/* Controller radio is available but is currently powered down */
hdev->amp_status = AMP_STATUS_POWERED_DOWN;
memset(hdev->eir, 0, sizeof(hdev->eir));
memset(hdev->dev_class, 0, sizeof(hdev->dev_class));
bacpy(&hdev->random_addr, BDADDR_ANY);
hci_req_sync_unlock(hdev);
hci_dev_put(hdev);
return 0;
}Marcel Holtmann
maintainerRe: Doubt/issue in hci_dev_do_close
Hi Harish,
Quoted 5 lines
In
hci_dev_do_closefirst it is sending vendor specific shutdown routine and then after some operations it is sending thehci_resetcommand.
However in vendor specific shutdown routine if vendor already powered off the vendor chip. In those cases it will not send theHCI_RESETcommand. That may lead to bug or some cleanup operations not done properly in Chip. Is there any specific reason why it is sending vendor specific shutdown routine first and then sendingHCI_RESETcommand.
are you setting HCI_QUIRK_RESET_ON_CLOSE and trying to use hdev->shutdown at the same time. That is not how this is suppose to be used. The HCI_QUIRK_RESET_ON_CLOSE is just for old Bluetooth 1.0b USB devices.
Regards
Marcel
Re: [PATCH v6 1/2] Bluetooth: hci_qca: Added support for WCN3998
In reply to Harish Bandidrivers/bluetooth/btqca.c int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) · line 419
Quoted 7 lines · Harish Bandi
drivers/bluetooth/btqca.c +7
-0+bool qca_is_wcn399x (enum qca_btsoc_type soc_type) +{ +if ((soc_type ==QCA_WCN3990 ) || (soc_type ==QCA_WCN3998 )) +return true; + +return false; +}
Dunno if you saw my earlier comment.
The above is not very idiomatic. I would write:
bool is_qca_soc_type_wcn399x_family(enum qca_btsoc_type soc_type)
{
return soc_type == QCA_WCN3990 || soc_type == QCA_WCN3998;
}Regards.
PATCH v6 2/2 dt-bindings: net: bluetooth: Add device tree bindings for QTI chip WCN3998
In reply to Harish BandiThis patch enables regulators for the Qualcomm Bluetooth WCN3998 controller.
---
Changes in V6:
- no changes
--- Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +3 -2
@@ -11,20 +11,21 @@ Required properties: - compatible: should contain one of the following: * "qcom,qca6174-bt" * "qcom,wcn3990-bt" + * "qcom,wcn3998-bt" Optional properties for compatible string qcom,qca6174-bt: - enable-gpios: gpio specifier used to enable chip - clocks: clock provided to the controller (SUSCLK_32KHZ) -Required properties for compatible string qcom,wcn3990-bt: +Required properties for compatible string qcom,wcn399x-bt: - vddio-supply: VDD_IO supply regulator handle. - vddxo-supply: VDD_XO supply regulator handle. - vddrf-supply: VDD_RF supply regulator handle. - vddch0-supply: VDD_CH0 supply regulator handle. -Optional properties for compatible string qcom,wcn3990-bt: +Optional properties for compatible string qcom,wcn399x-bt: - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Re: [PATCH v6 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip WCN3998
Quoted 2 lines · Harish Bandi
This patch enables regulators for the Qualcomm Bluetooth WCN3998 controller.
I commented on this on v3, but you didn't update it:
No, it doesn't.
The next version should probably say something like "Add compatible string for the Qualcomm WCN3998 Bluetooth controller".
Thanks
Matthias
Re: [PATCH v6 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip WCN3998
Hi Matthias,
Quoted 11 lines · Matthias Kaehlcke
Quoted 2 lines · Harish Bandi
This patch enables regulators for the Qualcomm Bluetooth WCN3998 controller.
I commented on this on v3, but you didn't update it:
No, it doesn't.
The next version should probably say something like "Add compatible string for the Qualcomm WCN3998 Bluetooth controller".
[Harish] - will take care in next version.
Quoted 3 lines
Thanks
Matthias
Re: [PATCH v6 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip WCN3998
In reply to Harish BandiHi Rob,
Could you please help to review DT bindings patch.
Quoted 40 lines · Harish Bandi
This patch enables regulators for the Qualcomm Bluetooth WCN3998 controller.
Signed-off-by Harish Bandi <[email protected]>---
Changes in V6:
- no changes--- Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)diff --git
a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txtb/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txtindex 824c0e2..7ef6118 100644Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +3
-2@@ -11,20 +11,21 @@ Required properties: - compatible: should contain one of the following: * "qcom,qca6174-bt" * "qcom,wcn3990-bt" + * "qcom,wcn3998-bt" Optional properties for compatible string qcom,qca6174-bt: - enable-gpios: gpio specifier used to enable chip - clocks: clock provided to the controller (SUSCLK_32KHZ) -Required properties for compatible string qcom,wcn3990-bt: +Required properties for compatible string qcom,wcn399x-bt: - vddio-supply: VDD_IO supply regulator handle. - vddxo-supply: VDD_XO supply regulator handle. - vddrf-supply: VDD_RF supply regulator handle. - vddch0-supply: VDD_CH0 supply regulator handle. -Optional properties for compatible string qcom,wcn3990-bt: +Optional properties for compatible string qcom,wcn399x-bt: - max-speed: see
Quoted 1 line
Documentation/devicetree/bindings/serial/slave-device.txt
Thanks,
Harish