Skip to contentSkip to conversation

igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11 v4

PATCH Superseded Anshuman Gupta 4 participants 9 messages May 6, 2019 – May 8, 2019

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v4 cover igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11 v4

i915_pm_lpsp patch, sending v4 version after addressing review comments and fixing IGT failures for test method.

This series has added i915_pm_lpsp subtests to CI fast feedback list in order to run cover these subtest on all affected platforms.

Revision 1 Link:  https://patchwork.freedesktop.org/series/58051/
Revision 2 Link:  https://patchwork.freedesktop.org/series/59048/

Anshuman Gupta (4):
igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11. igt/i915/i915_pm_lpsp check lpsp relevance on non edp panel. igt/i915/i915_pm_lpsp skip edp-panel-fitter test. DO_NOT_MERGE add i915_pm_lpsp subtests to CI fast feedback list.

 tests/i915/i915_pm_lpsp.c             | 143 +++++++++++++++++++++++++++++-----
 tests/intel-ci/fast-feedback.testlist |   4 +
 2 files changed, 129 insertions(+), 18 deletions(-)
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#1 lore raw

PATCH v4 1/4 igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11.

Enabling i915_pm_lpsp igt tests for all platforms till Gen11. Earlier these test were enabled only on haswell and broadwell platforms.

v2: Removed global no_lpsp_pw_idx. [Animesh]
Check only state value for power well. [Animesh] Adding igt_wait of 1 second as sometimes screens_disabled test fails because AUDIO power domain was having non-zero power domain reference count.[Imre]
Dumping i915_pm_runtime_status and i915_power_domain_info in case test fails.[Imre]

---
 tests/i915/i915_pm_lpsp.c | 83 +++++++++++++++++++++++++++++++++++++----------
 1 file changed, 66 insertions(+), 17 deletions(-)
tests/i915/i915_pm_lpsp.c +66 -17
index b319dbe..d09eec4 100644
@@ -30,26 +30,64 @@
 #include <fcntl.h>
 #include <unistd.h>
 
+#include "igt_sysfs.h"
+
+#define   HSW_PW_CTL_IDX_GLOBAL                 15
+#define   SKL_PW_CTL_IDX_PW_2                   15
+#define   ICL_PW_CTL_IDX_PW_3                   2
+
+#define   HSW_PWR_WELL_CTL_REQ(pw_idx)          (0x2 << ((pw_idx) * 2))
+#define   HSW_PWR_WELL_CTL_STATE(pw_idx)        (0x1 << ((pw_idx) * 2))
+
+#define DUMP_DBGFS(file1, file2, fd)			\
+	"%s:\n%s\n%s:\n%s\n", file1,			\
+	igt_sysfs_get(fd, file1), file2,		\
+	igt_sysfs_get(fd, file2)			\
 
 static bool supports_lpsp(uint32_t devid)
 {
-	return IS_HASWELL(devid) || IS_BROADWELL(devid);
+	return IS_HASWELL(devid) || IS_BROADWELL(devid)
+				 || AT_LEAST_GEN(devid, 9);
 }
 
-static bool lpsp_is_enabled(int drm_fd)
+static int get_no_lpsp_pw_idx(uint32_t devid)
 {
-	uint32_t val;
+	int no_lpsp_pw_idx;
+
+	if (IS_HASWELL(devid) || IS_BROADWELL(devid))
+		no_lpsp_pw_idx = HSW_PW_CTL_IDX_GLOBAL;
+	else if (IS_GEN(devid, 11))
+		no_lpsp_pw_idx = ICL_PW_CTL_IDX_PW_3;
+	else if (AT_LEAST_GEN(devid, 9))
+		no_lpsp_pw_idx = SKL_PW_CTL_IDX_PW_2;
+	else
+		no_lpsp_pw_idx = -1;
+
+	return no_lpsp_pw_idx;
+}
+
+static bool lpsp_is_enabled(uint32_t devid)
+{
+	uint32_t val, mask;
+	int pw_idx;
+
+	pw_idx = get_no_lpsp_pw_idx(devid);
+	igt_require(pw_idx > 0);
+	mask = HSW_PWR_WELL_CTL_STATE(pw_idx);
 
 	val = INREG(HSW_PWR_WELL_CTL2);
-	return !(val & HSW_PWR_WELL_STATE_ENABLED);
+	return !(val & mask);
 }
 
 /* The LPSP mode is all about an enabled pipe, but we expect to also be in the
  * low power mode when no pipes are enabled, so do this check anyway. */
-static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res)
+static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res,
+				     uint32_t devid, int fd)
 {
 	kmstest_unset_all_crtcs(drm_fd, drm_res);
-	igt_assert(lpsp_is_enabled(drm_fd));
+	igt_assert_f(igt_wait(lpsp_is_enabled(devid), 1000, 100),
+		     DUMP_DBGFS("i915_runtime_pm_status",
+				"i915_power_domain_info", fd));
 }
 
 static uint32_t create_fb(int drm_fd, int width, int height)
@@ -62,7 +100,7 @@ static uint32_t create_fb(int drm_fd, int width, int height)
 
 static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
 			drmModeConnectorPtr *drm_connectors, uint32_t devid,
-			bool use_panel_fitter)
+			bool use_panel_fitter, int fd)
 {
 	int i, rc;
 	uint32_t crtc_id = 0, buffer_id = 0;
@@ -133,16 +171,18 @@ static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
 
 	if (use_panel_fitter) {
 		if (IS_HASWELL(devid))
-			igt_assert(!lpsp_is_enabled(drm_fd));
+			igt_assert(!lpsp_is_enabled(devid));
 		else
-			igt_assert(lpsp_is_enabled(drm_fd));
+			igt_assert(lpsp_is_enabled(devid));
 	} else {
-		igt_assert(lpsp_is_enabled(drm_fd));
+		igt_assert_f(igt_wait(lpsp_is_enabled(devid), 1000, 100),
+			     DUMP_DBGFS("i915_runtime_pm_status",
+					"i915_power_domain_info", fd));
 	}
 }
 
-static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res,
-			    drmModeConnectorPtr *drm_connectors)
+static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res, uint32_t devid,
+			    drmModeConnectorPtr *drm_connectors, int fd)
 {
 	int i, rc;
 	uint32_t crtc_id = 0, buffer_id = 0;
@@ -178,7 +218,10 @@ static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res,
 			    &connector->connector_id, 1, mode);
 	igt_assert_eq(rc, 0);
 
-	igt_assert(!lpsp_is_enabled(drm_fd));
+	igt_assert(!lpsp_is_enabled(devid));
+	igt_assert_f(igt_wait(!lpsp_is_enabled(devid), 1000, 100),
+		     DUMP_DBGFS("i915_runtime_pm_status",
+				"i915_power_domain_info", fd));
 }
 
 #define MAX_CONNECTORS 32
@@ -190,6 +233,7 @@ drmModeConnectorPtr drm_connectors[MAX_CONNECTORS];
 
 igt_main
 {
+	int debugfs;
 	igt_fixture {
 		int i;
 
@@ -212,17 +256,22 @@ igt_main
 
 		intel_register_access_init(intel_get_pci_device(), 0, drm_fd);
 
+		igt_require(get_no_lpsp_pw_idx(devid) > 0);
 		kmstest_set_vt_graphics_mode();
+		debugfs = igt_debugfs_dir(drm_fd);
 	}
 
 	igt_subtest("screens-disabled")
-		screens_disabled_subtest(drm_fd, drm_res);
+		screens_disabled_subtest(drm_fd, drm_res, devid, debugfs);
 	igt_subtest("edp-native")
-		edp_subtest(drm_fd, drm_res, drm_connectors, devid, false);
+		edp_subtest(drm_fd, drm_res, drm_connectors, devid, false,
+			    debugfs);
 	igt_subtest("edp-panel-fitter")
-		edp_subtest(drm_fd, drm_res, drm_connectors, devid, true);
+		edp_subtest(drm_fd, drm_res, drm_connectors, devid, true,
+			    debugfs);
 	igt_subtest("non-edp")
-		non_edp_subtest(drm_fd, drm_res, drm_connectors);
+		non_edp_subtest(drm_fd, drm_res, devid, drm_connectors,
+				debugfs);
 
 	igt_fixture {
 		int i;
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#2 lore raw

PATCH v4 2/4 igt/i915/i915_pm_lpsp check lpsp relevance on non edp panel.

In reply to Anshuman Gupta

Earlier on HSW/BDW it was assumed that only eDP panel will act as lpsp. But that is not true now.
So checking whether a non edp panel can act as lpsp or not.

v2: CI igt fixures.
v3: CI igt fixture.

---
 tests/i915/i915_pm_lpsp.c | 63 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 59 insertions(+), 4 deletions(-)
tests/i915/i915_pm_lpsp.c +59 -4
index d09eec4..baf03b2 100644
@@ -38,6 +38,7 @@
 
 #define   HSW_PWR_WELL_CTL_REQ(pw_idx)          (0x2 << ((pw_idx) * 2))
 #define   HSW_PWR_WELL_CTL_STATE(pw_idx)        (0x1 << ((pw_idx) * 2))
+#define   LPSP_PORT				'A'
 
 #define DUMP_DBGFS(file1, file2, fd)			\
 	"%s:\n%s\n%s:\n%s\n", file1,			\
@@ -79,6 +80,55 @@ static bool lpsp_is_enabled(uint32_t devid)
 	return !(val & mask);
 }
 
+static bool is_non_edp_ddia_port(FILE *file, char *info)
+{
+	int ret;
+	char ddi[256];
+	char port;
+	bool ddi_a_port = false;
+
+	while (fgets(info, 256, file)) {
+		if (strstr(info, "encoder")) {
+			ret = sscanf(info, "%*s %*s %*s %s %c", ddi, &port);
+			igt_assert_eq(ret, 2);
+			if (!strcmp(ddi, "DDI") && port == LPSP_PORT)
+				ddi_a_port = true;
+		}
+		if (strstr(info, "connector") && strstr(info, "eDP"))
+			ddi_a_port = false;
+	}
+	return ddi_a_port;
+}
+
+static bool non_edp_lpsp_check(int device)
+{
+	char tmp[256];
+	FILE *file;
+	int line;
+	int fd;
+	bool is_lpsp = false;
+
+	fd = igt_debugfs_open(device, "i915_display_info", O_RDONLY);
+	file = fdopen(fd, "r");
+	igt_skip_on(!file);
+
+	line = 0;
+	while (fgets(tmp, 256, file)) {
+		if (strstr(tmp, "CRTC") && line > 0) {
+			if (strstr(tmp, "pipe: A") &&
+			    strstr(tmp, "active=yes")) {
+				is_lpsp = is_non_edp_ddia_port(file, tmp);
+				break;
+			}
+		}
+		line++;
+	}
+
+	fclose(file);
+	close(fd);
+	return is_lpsp;
+}
+
 /* The LPSP mode is all about an enabled pipe, but we expect to also be in the
  * low power mode when no pipes are enabled, so do this check anyway. */
 static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res,
@@ -218,10 +268,15 @@ static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res, uint32_t devid,
 			    &connector->connector_id, 1, mode);
 	igt_assert_eq(rc, 0);
 
-	igt_assert(!lpsp_is_enabled(devid));
-	igt_assert_f(igt_wait(!lpsp_is_enabled(devid), 1000, 100),
-		     DUMP_DBGFS("i915_runtime_pm_status",
-				"i915_power_domain_info", fd));
+	if (non_edp_lpsp_check(drm_fd) ||
+	    connector->connector_type == DRM_MODE_CONNECTOR_DSI)
+		igt_assert_f(igt_wait(lpsp_is_enabled(devid), 1000, 100),
+			     DUMP_DBGFS("i915_runtime_pm_status",
+					"i915_power_domain_info", fd));
+	else
+		igt_assert_f(igt_wait(!lpsp_is_enabled(devid), 1000, 100),
+			     DUMP_DBGFS("i915_runtime_pm_status",
+					"i915_power_domain_info", fd));
 }
 
 #define MAX_CONNECTORS 32
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#3 lore raw

PATCH v4 3/4 igt/i915/i915_pm_lpsp skip edp-panel-fitter test.

In reply to Anshuman Gupta

Skip edp-panel-fitter test for Gen9 onwards platform.

---
 tests/i915/i915_pm_lpsp.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
tests/i915/i915_pm_lpsp.c +4 -1
index baf03b2..829aff5 100644
@@ -321,9 +321,12 @@ igt_main
 	igt_subtest("edp-native")
 		edp_subtest(drm_fd, drm_res, drm_connectors, devid, false,
 			    debugfs);
-	igt_subtest("edp-panel-fitter")
+	igt_subtest("edp-panel-fitter") {
+		igt_skip_on(AT_LEAST_GEN(devid, 9));
 		edp_subtest(drm_fd, drm_res, drm_connectors, devid, true,
 			    debugfs);
+	}
+
 	igt_subtest("non-edp")
 		non_edp_subtest(drm_fd, drm_res, devid, drm_connectors,
 				debugfs);
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#4 lore raw

Re: [igt-dev] [PATCH i-g-t v4 3/4] igt/i915/i915_pm_lpsp skip edp-panel-fitter test.

Quoted 1 line · Anshuman Gupta

Skip edp-panel-fitter test for Gen9 onwards platform.

We can see that. The commit message should tell us *why*.

BR,
Jani.

Quoted 25 lines
---
 tests/i915/i915_pm_lpsp.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
tests/i915/i915_pm_lpsp.c +4 -1
index baf03b2..829aff5 100644
@@ -321,9 +321,12 @@ igt_main
 	igt_subtest("edp-native")
 		edp_subtest(drm_fd, drm_res, drm_connectors, devid, false,
 			    debugfs);
-	igt_subtest("edp-panel-fitter")
+	igt_subtest("edp-panel-fitter") {
+		igt_skip_on(AT_LEAST_GEN(devid, 9));
 		edp_subtest(drm_fd, drm_res, drm_connectors, devid, true,
 			    debugfs);
+	}
+
 	igt_subtest("non-edp")
 		non_edp_subtest(drm_fd, drm_res, devid, drm_connectors,
 				debugfs);
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#5 lore raw

PATCH v4 4/4 DO_NOT_MERGE add i915_pm_lpsp subtests to CI fast feedback list.

In reply to Anshuman Gupta

This patch adds below i915_pm_lpsp subtests to CI fast feedback list in order to test these subtest on ICL
(which is affected platform).
Subtests:
screens-disabled
edp-native
edp-panel-fitter
non-edp

---
 tests/intel-ci/fast-feedback.testlist | 4 ++++
 1 file changed, 4 insertions(+)
tests/intel-ci/fast-feedback.testlist +4 -0
index 40475b1..670f0a2 100644
@@ -216,6 +216,10 @@ igt@kms_psr@sprite_plane_onoff
 igt@kms_psr@primary_mmap_gtt
 igt@kms_setmode@basic-clone-single-crtc
 igt@i915_pm_backlight@basic-brightness
+igt@i915_pm_lpsp@edp-native
+igt@i915_pm_lpsp@edp-panel-fitter
+igt@i915_pm_lpsp@non-edp
+igt@i915_pm_lpsp@screens-disabled
 igt@i915_pm_rpm@basic-pci-d3-state
 igt@i915_pm_rpm@basic-rte
 igt@i915_pm_rps@basic-api
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#6 lore raw

[igt-dev] ✗ Fi.CI.BAT: failure for igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11 v4

In reply to Anshuman Gupta
== Series Details ==

== Series Details ==

Series: igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11 v4
URL : https://patchwork.freedesktop.org/series/60321/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_6049 -> IGTPW_2943
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_2943 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_2943, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://patchwork.freedesktop.org/api/1.0/series/60321/revisions/1/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2943:

### IGT changes ###

#### Possible regressions ####

* igt@i915_pm_lpsp@edp-panel-fitter:
- fi-icl-y: NOTRUN -> [SKIP][1] +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-icl-y/igt@[email protected]
- fi-icl-u3: NOTRUN -> [SKIP][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-icl-u3/igt@[email protected]

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@i915_pm_lpsp@edp-panel-fitter:
- {fi-icl-u2}: NOTRUN -> [SKIP][3]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-icl-u2/igt@[email protected]
- {fi-cml-u}: NOTRUN -> [SKIP][4] +1 similar issue
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-cml-u/igt@[email protected]
- {fi-cml-u2}: NOTRUN -> [SKIP][5]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-cml-u2/igt@[email protected]

Known issues
------------

Here are the changes found in IGTPW_2943 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_busy@basic-flip-a:
- fi-kbl-7567u: [PASS][6] -> [SKIP][7] ([fdo#109271] / [fdo#109278]) +2 similar issues
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-kbl-7567u/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-kbl-7567u/igt@[email protected]

#### Possible fixes ####

* igt@i915_pm_rpm@module-reload:
- fi-skl-6770hq: [FAIL][8] ([fdo#108511]) -> [PASS][9]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-skl-6770hq/igt@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-skl-6770hq/igt@[email protected]

* igt@i915_selftest@live_contexts:
- fi-skl-gvtdvm: [DMESG-FAIL][10] ([fdo#110235]) -> [PASS][11]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-skl-gvtdvm/igt@i915_selftest@live_contexts.html
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-skl-gvtdvm/igt@i915_selftest@live_contexts.html

* igt@i915_selftest@live_evict:
- fi-bsw-kefka: [DMESG-WARN][12] ([fdo#107709]) -> [PASS][13]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-bsw-kefka/igt@i915_selftest@live_evict.html
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-bsw-kefka/igt@i915_selftest@live_evict.html

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- fi-blb-e6850: [INCOMPLETE][14] ([fdo#107718] / [fdo#110581]) -> [PASS][15]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-blb-e6850/igt@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-blb-e6850/igt@[email protected]

#### Warnings ####

* igt@i915_selftest@live_guc:
- fi-apl-guc: [INCOMPLETE][16] ([fdo#103927] / [fdo#110581]) -> [INCOMPLETE][17] ([fdo#103927])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-apl-guc/igt@i915_selftest@live_guc.html
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-apl-guc/igt@i915_selftest@live_guc.html

* igt@i915_selftest@live_hangcheck:
- fi-icl-y: [INCOMPLETE][18] ([fdo#107713] / [fdo#108569] / [fdo#110581]) -> [INCOMPLETE][19] ([fdo#107713] / [fdo#108569])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-icl-y/igt@i915_selftest@live_hangcheck.html
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-icl-y/igt@i915_selftest@live_hangcheck.html

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#107709]: https://bugs.freedesktop.org/show_bug.cgi?id=107709
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#108511]: https://bugs.freedesktop.org/show_bug.cgi?id=108511
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#110235]: https://bugs.freedesktop.org/show_bug.cgi?id=110235
[fdo#110581]: https://bugs.freedesktop.org/show_bug.cgi?id=110581

Participating hosts (50 -> 45)
------------------------------

Additional (2): fi-icl-u2 fi-pnv-d510
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus

Build changes
-------------

* IGT: IGT_4972 -> IGTPW_2943

CI_DRM_6049: 5e6e5018d74f5ae297db088c45cea19f939fb225 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2943: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/
IGT_4972: f052e49a43cc9704ea5f240df15dd9d3dfed68ab @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#7 lore raw

Re: [igt-dev] ✗ Fi.CI.BAT: failure for igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11 v4

Hi Petri/ Martin

Quoted 32 lines · Patchwork

== Series Details ==

Series: igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11 v4
URL : https://patchwork.freedesktop.org/series/60321/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_6049 -> IGTPW_2943
====================================================

Summary
-------

   **FAILURE**

[email protected]
Serious unknown changes coming with IGTPW_2943 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_2943, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

   External URL: https://patchwork.freedesktop.org/api/1.0/series/60321/revisions/1/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2943:

### IGT changes ###

Quoted 7 lines

#### Possible regressions ####

* igt@i915_pm_lpsp@edp-panel-fitter:
- fi-icl-y: NOTRUN -> [SKIP][1] +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-icl-y/igt@[email protected]
- fi-icl-u3: NOTRUN -> [SKIP][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-icl-u3/igt@[email protected]

Since Gen9 onward platform don't have panel fitters. The subtest has skipped on all platform Gen9 onward. Could you please filter these failures so we can cover other i915_pm_lpsp subtests. It seems due to this failure other i915_pm_lpsp test are not executing.

Thanks ,
Anshuman Gupta.

Quoted 98 lines

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@i915_pm_lpsp@edp-panel-fitter:
- {fi-icl-u2}: NOTRUN -> [SKIP][3]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-icl-u2/igt@[email protected]
- {fi-cml-u}: NOTRUN -> [SKIP][4] +1 similar issue
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-cml-u/igt@[email protected]
- {fi-cml-u2}: NOTRUN -> [SKIP][5]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-cml-u2/igt@[email protected]

Known issues
------------

Here are the changes found in IGTPW_2943 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_busy@basic-flip-a:

     - fi-kbl-7567u:       [PASS][6] -> [SKIP][7] ([fdo#109271] / [fdo#109278]) +2 similar issues
    [6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-kbl-7567u/igt@[email protected]
    [7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-kbl-7567u/igt@[email protected]

#### Possible fixes ####

* igt@i915_pm_rpm@module-reload:

     - fi-skl-6770hq:      [FAIL][8] ([fdo#108511]) -> [PASS][9]
    [8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-skl-6770hq/igt@[email protected]
    [9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-skl-6770hq/igt@[email protected]

* igt@i915_selftest@live_contexts:

     - fi-skl-gvtdvm:      [DMESG-FAIL][10] ([fdo#110235]) -> [PASS][11]
    [10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-skl-gvtdvm/igt@i915_selftest@live_contexts.html
    [11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-skl-gvtdvm/igt@i915_selftest@live_contexts.html

* igt@i915_selftest@live_evict:

     - fi-bsw-kefka:       [DMESG-WARN][12] ([fdo#107709]) -> [PASS][13]
    [12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-bsw-kefka/igt@i915_selftest@live_evict.html
    [13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-bsw-kefka/igt@i915_selftest@live_evict.html

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:

     - fi-blb-e6850:       [INCOMPLETE][14] ([fdo#107718] / [fdo#110581]) -> [PASS][15]
    [14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-blb-e6850/igt@[email protected]
    [15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-blb-e6850/igt@[email protected]

#### Warnings ####

   * igt@i915_selftest@live_guc:
     - fi-apl-guc:         [INCOMPLETE][16] ([fdo#103927] / [fdo#110581]) -> [INCOMPLETE][17] ([fdo#103927])
    [16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-apl-guc/igt@i915_selftest@live_guc.html
    [17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-apl-guc/igt@i915_selftest@live_guc.html

   * igt@i915_selftest@live_hangcheck:
     - fi-icl-y:           [INCOMPLETE][18] ([fdo#107713] / [fdo#108569] / [fdo#110581]) -> [INCOMPLETE][19] ([fdo#107713] / [fdo#108569])
    [18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-icl-y/igt@i915_selftest@live_hangcheck.html
    [19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-icl-y/igt@i915_selftest@live_hangcheck.html

   
   {name}: This element is suppressed. This means it is ignored when computing
           the status of the difference (SUCCESS, WARNING, or FAILURE).

   [fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
   [fdo#107709]: https://bugs.freedesktop.org/show_bug.cgi?id=107709
   [fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
   [fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
   [fdo#108511]: https://bugs.freedesktop.org/show_bug.cgi?id=108511
   [fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
   [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
   [fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
   [fdo#110235]: https://bugs.freedesktop.org/show_bug.cgi?id=110235
   [fdo#110581]: https://bugs.freedesktop.org/show_bug.cgi?id=110581

Participating hosts (50 -> 45)
------------------------------

   Additional (2): fi-icl-u2 fi-pnv-d510
   Missing    (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus

Build changes
-------------

   * IGT: IGT_4972 -> IGTPW_2943

   CI_DRM_6049: 5e6e5018d74f5ae297db088c45cea19f939fb225 @ git://anongit.freedesktop.org/gfx-ci/linux
   IGTPW_2943: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/
   IGT_4972: f052e49a43cc9704ea5f240df15dd9d3dfed68ab @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Quoted 4 lines

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#8 lore raw

Re: [igt-dev] ✗ Fi.CI.BAT: failure for igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11 v4

Quoted 37 lines · Anshuman

Hi Petri/ Martin

Quoted 34 lines · Patchwork

== Series Details ==

Series: igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11 v4
URL : https://patchwork.freedesktop.org/series/60321/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_6049 -> IGTPW_2943
====================================================

Summary
-------

   **FAILURE**

[email protected]
Serious unknown changes coming with IGTPW_2943 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_2943, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

   External URL: https://patchwork.freedesktop.org/api/1.0/series/60321/revisions/1/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2943:

### IGT changes ###

#### Possible regressions ####

Quoted 8 lines
Quoted 5 lines

* igt@i915_pm_lpsp@edp-panel-fitter:
- fi-icl-y: NOTRUN -> [SKIP][1] +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-icl-y/igt@[email protected]
- fi-icl-u3: NOTRUN -> [SKIP][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-icl-u3/igt@[email protected]

Since Gen9 onward platform don't have panel fitters. The subtest has skipped on all platform Gen9 onward. Could you please filter these failures so we can cover other i915_pm_lpsp subtests.

The panel fitter was just renamed to pipe scaler. No practical difference whatsoever.

Quoted 110 lines

It seems due to this failure other i915_pm_lpsp test are not executing.

Thanks ,
Anshuman Gupta.

Quoted 98 lines

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@i915_pm_lpsp@edp-panel-fitter:
- {fi-icl-u2}: NOTRUN -> [SKIP][3]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-icl-u2/igt@[email protected]
- {fi-cml-u}: NOTRUN -> [SKIP][4] +1 similar issue
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-cml-u/igt@[email protected]
- {fi-cml-u2}: NOTRUN -> [SKIP][5]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-cml-u2/igt@[email protected]

Known issues
------------

Here are the changes found in IGTPW_2943 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_busy@basic-flip-a:

     - fi-kbl-7567u:       [PASS][6] -> [SKIP][7] ([fdo#109271] / [fdo#109278]) +2 similar issues
    [6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-kbl-7567u/igt@[email protected]
    [7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-kbl-7567u/igt@[email protected]

#### Possible fixes ####

* igt@i915_pm_rpm@module-reload:

     - fi-skl-6770hq:      [FAIL][8] ([fdo#108511]) -> [PASS][9]
    [8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-skl-6770hq/igt@[email protected]
    [9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-skl-6770hq/igt@[email protected]

* igt@i915_selftest@live_contexts:

     - fi-skl-gvtdvm:      [DMESG-FAIL][10] ([fdo#110235]) -> [PASS][11]
    [10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-skl-gvtdvm/igt@i915_selftest@live_contexts.html
    [11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-skl-gvtdvm/igt@i915_selftest@live_contexts.html

* igt@i915_selftest@live_evict:

     - fi-bsw-kefka:       [DMESG-WARN][12] ([fdo#107709]) -> [PASS][13]
    [12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-bsw-kefka/igt@i915_selftest@live_evict.html
    [13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-bsw-kefka/igt@i915_selftest@live_evict.html

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:

     - fi-blb-e6850:       [INCOMPLETE][14] ([fdo#107718] / [fdo#110581]) -> [PASS][15]
    [14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-blb-e6850/igt@[email protected]
    [15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-blb-e6850/igt@[email protected]

#### Warnings ####

   * igt@i915_selftest@live_guc:
     - fi-apl-guc:         [INCOMPLETE][16] ([fdo#103927] / [fdo#110581]) -> [INCOMPLETE][17] ([fdo#103927])
    [16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-apl-guc/igt@i915_selftest@live_guc.html
    [17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-apl-guc/igt@i915_selftest@live_guc.html

   * igt@i915_selftest@live_hangcheck:
     - fi-icl-y:           [INCOMPLETE][18] ([fdo#107713] / [fdo#108569] / [fdo#110581]) -> [INCOMPLETE][19] ([fdo#107713] / [fdo#108569])
    [18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6049/fi-icl-y/igt@i915_selftest@live_hangcheck.html
    [19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/fi-icl-y/igt@i915_selftest@live_hangcheck.html

   
   {name}: This element is suppressed. This means it is ignored when computing
           the status of the difference (SUCCESS, WARNING, or FAILURE).

   [fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
   [fdo#107709]: https://bugs.freedesktop.org/show_bug.cgi?id=107709
   [fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
   [fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
   [fdo#108511]: https://bugs.freedesktop.org/show_bug.cgi?id=108511
   [fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
   [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
   [fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
   [fdo#110235]: https://bugs.freedesktop.org/show_bug.cgi?id=110235
   [fdo#110581]: https://bugs.freedesktop.org/show_bug.cgi?id=110581

Participating hosts (50 -> 45)
------------------------------

   Additional (2): fi-icl-u2 fi-pnv-d510
   Missing    (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus

Build changes
-------------

   * IGT: IGT_4972 -> IGTPW_2943

   CI_DRM_6049: 5e6e5018d74f5ae297db088c45cea19f939fb225 @ git://anongit.freedesktop.org/gfx-ci/linux
   IGTPW_2943: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/
   IGT_4972: f052e49a43cc9704ea5f240df15dd9d3dfed68ab @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Quoted 4 lines

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2943/

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

Signature · 6 lines
Ville Syrjälä
Intel
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev