Skip to contentSkip to conversation

enable pm_lpsp for platforms till Gen11 v5

PATCH Superseded Anshuman Gupta 3 participants 11 messages May 9, 2019 – May 10, 2019

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v5 cover enable pm_lpsp for platforms till Gen11 v5

This is v5 version after enabling edp-panel-fitter sub-test in this series.

This series has added i915_pm_lpsp subtests to CI fast feedback list in order to run cover these subtest on all affected platforms.

Revision 1 Link:  https://patchwork.freedesktop.org/series/58051/
Revision 2 Link:  https://patchwork.freedesktop.org/series/59048/

Anshuman Gupta (4):
igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11. igt/i915/i915_pm_lpsp check lpsp relevance on non edp panel. igt/i915/i915_pm_lpsp: panel-fitter subtest modifications. DO_NOT_MERGE add i915_pm_lpsp subtests to CI fast feedback list.

 tests/i915/i915_pm_lpsp.c             | 163 ++++++++++++++++++++++++++++------
 tests/intel-ci/fast-feedback.testlist |   4 +
 2 files changed, 141 insertions(+), 26 deletions(-)
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#1 lore raw

PATCH v5 1/4 igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11.

Enabling i915_pm_lpsp igt tests for all platforms till Gen11. Earlier these test were enabled only on haswell and broadwell platforms.

v2: Removed global no_lpsp_pw_idx. [Animesh]
Check only state value for power well. [Animesh] Adding igt_wait of 1 second as sometimes screens_disabled test fails because AUDIO power domain was having non-zero power domain reference count.[Imre]
Dumping i915_pm_runtime_status and i915_power_domain_info in case test fails.[Imre]
v3: Having igt_wait() to check lpsp_enabled() only to the part
of test affected by delayed audio codec disabling.

---
 tests/i915/i915_pm_lpsp.c | 88 +++++++++++++++++++++++++++++++++++++----------
 1 file changed, 70 insertions(+), 18 deletions(-)
tests/i915/i915_pm_lpsp.c +70 -18
index b319dbe..1abe587 100644
@@ -30,26 +30,68 @@
 #include <fcntl.h>
 #include <unistd.h>
 
+#include "igt_sysfs.h"
+
+#define   HSW_PW_CTL_IDX_GLOBAL                 15
+#define   SKL_PW_CTL_IDX_PW_2                   15
+#define   ICL_PW_CTL_IDX_PW_3                   2
+
+#define   HSW_PWR_WELL_CTL_REQ(pw_idx)          (0x2 << ((pw_idx) * 2))
+#define   HSW_PWR_WELL_CTL_STATE(pw_idx)        (0x1 << ((pw_idx) * 2))
+
+#define DUMP_DBGFS(file1, file2, fd)			\
+	"%s:\n%s\n%s:\n%s\n", file1,			\
+	igt_sysfs_get(fd, file1), file2,		\
+	igt_sysfs_get(fd, file2)			\
 
 static bool supports_lpsp(uint32_t devid)
 {
-	return IS_HASWELL(devid) || IS_BROADWELL(devid);
+	return IS_HASWELL(devid) || IS_BROADWELL(devid)
+				 || AT_LEAST_GEN(devid, 9);
+}
+
+static int get_no_lpsp_pw_idx(uint32_t devid)
+{
+	int no_lpsp_pw_idx;
+
+	if (IS_HASWELL(devid) || IS_BROADWELL(devid))
+		no_lpsp_pw_idx = HSW_PW_CTL_IDX_GLOBAL;
+	else if (IS_GEN(devid, 11))
+		no_lpsp_pw_idx = ICL_PW_CTL_IDX_PW_3;
+	else if (AT_LEAST_GEN(devid, 9))
+		no_lpsp_pw_idx = SKL_PW_CTL_IDX_PW_2;
+	else
+		no_lpsp_pw_idx = -1;
+
+	return no_lpsp_pw_idx;
 }
 
-static bool lpsp_is_enabled(int drm_fd)
+static bool lpsp_is_enabled(uint32_t devid)
 {
-	uint32_t val;
+	uint32_t val, mask;
+	int pw_idx;
+
+	pw_idx = get_no_lpsp_pw_idx(devid);
+	igt_require(pw_idx > 0);
+	mask = HSW_PWR_WELL_CTL_STATE(pw_idx);
 
 	val = INREG(HSW_PWR_WELL_CTL2);
-	return !(val & HSW_PWR_WELL_STATE_ENABLED);
+	return !(val & mask);
 }
 
 /* The LPSP mode is all about an enabled pipe, but we expect to also be in the
  * low power mode when no pipes are enabled, so do this check anyway. */
-static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res)
+static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res,
+				     uint32_t devid, int fd)
 {
 	kmstest_unset_all_crtcs(drm_fd, drm_res);
-	igt_assert(lpsp_is_enabled(drm_fd));
+
+	/* Some times delayed audio codec disabling causes to fail the test.
+	 * Using igt_wait to check lpsp after drm_mode_setcrtc().
+	 */
+	igt_assert_f(igt_wait(lpsp_is_enabled(devid), 1000, 100),
+		     DUMP_DBGFS("i915_runtime_pm_status",
+				"i915_power_domain_info", fd));
 }
 
 static uint32_t create_fb(int drm_fd, int width, int height)
@@ -62,7 +104,7 @@ static uint32_t create_fb(int drm_fd, int width, int height)
 
 static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
 			drmModeConnectorPtr *drm_connectors, uint32_t devid,
-			bool use_panel_fitter)
+			bool use_panel_fitter, int fd)
 {
 	int i, rc;
 	uint32_t crtc_id = 0, buffer_id = 0;
@@ -133,16 +175,18 @@ static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
 
 	if (use_panel_fitter) {
 		if (IS_HASWELL(devid))
-			igt_assert(!lpsp_is_enabled(drm_fd));
+			igt_assert(!lpsp_is_enabled(devid));
 		else
-			igt_assert(lpsp_is_enabled(drm_fd));
+			igt_assert(lpsp_is_enabled(devid));
 	} else {
-		igt_assert(lpsp_is_enabled(drm_fd));
+		igt_assert_f(lpsp_is_enabled(devid),
+			     DUMP_DBGFS("i915_runtime_pm_status",
+					"i915_power_domain_info", fd));
 	}
 }
 
-static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res,
-			    drmModeConnectorPtr *drm_connectors)
+static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res, uint32_t devid,
+			    drmModeConnectorPtr *drm_connectors, int fd)
 {
 	int i, rc;
 	uint32_t crtc_id = 0, buffer_id = 0;
@@ -177,8 +221,9 @@ static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res,
 	rc = drmModeSetCrtc(drm_fd, crtc_id, buffer_id, 0, 0,
 			    &connector->connector_id, 1, mode);
 	igt_assert_eq(rc, 0);
-
-	igt_assert(!lpsp_is_enabled(drm_fd));
+	igt_assert_f(!lpsp_is_enabled(devid),
+		     DUMP_DBGFS("i915_runtime_pm_status",
+				"i915_power_domain_info", fd));
 }
 
 #define MAX_CONNECTORS 32
@@ -190,6 +235,8 @@ drmModeConnectorPtr drm_connectors[MAX_CONNECTORS];
 
 igt_main
 {
+	int debugfs;
+
 	igt_fixture {
 		int i;
 
@@ -212,17 +259,22 @@ igt_main
 
 		intel_register_access_init(intel_get_pci_device(), 0, drm_fd);
 
+		igt_require(get_no_lpsp_pw_idx(devid) > 0);
 		kmstest_set_vt_graphics_mode();
+		debugfs = igt_debugfs_dir(drm_fd);
 	}
 
 	igt_subtest("screens-disabled")
-		screens_disabled_subtest(drm_fd, drm_res);
+		screens_disabled_subtest(drm_fd, drm_res, devid, debugfs);
 	igt_subtest("edp-native")
-		edp_subtest(drm_fd, drm_res, drm_connectors, devid, false);
+		edp_subtest(drm_fd, drm_res, drm_connectors, devid, false,
+			    debugfs);
 	igt_subtest("edp-panel-fitter")
-		edp_subtest(drm_fd, drm_res, drm_connectors, devid, true);
+		edp_subtest(drm_fd, drm_res, drm_connectors, devid, true,
+			    debugfs);
 	igt_subtest("non-edp")
-		non_edp_subtest(drm_fd, drm_res, drm_connectors);
+		non_edp_subtest(drm_fd, drm_res, devid, drm_connectors,
+				debugfs);
 
 	igt_fixture {
 		int i;
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#2 lore raw

Re: [igt-dev] [PATCH i-g-t v5 1/4] igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11.

Hi,

Quoted 25 lines · Anshuman Gupta

Enabling i915_pm_lpsp igt tests for all platforms till Gen11. Earlier these test were enabled only on haswell and broadwell platforms.

v2: Removed global no_lpsp_pw_idx. [Animesh]
Check only state value for power well. [Animesh] Adding igt_wait of 1 second as sometimes screens_disabled test fails because AUDIO power domain was having non-zero power domain reference count.[Imre]
Dumping i915_pm_runtime_status and i915_power_domain_info in case test fails.[Imre]
v3: Having igt_wait() to check lpsp_enabled() only to the part
of test affected by delayed audio codec disabling.

---
  tests/i915/i915_pm_lpsp.c | 88 +++++++++++++++++++++++++++++++++++++----------
  1 file changed, 70 insertions(+), 18 deletions(-)
tests/i915/i915_pm_lpsp.c +0 -0
index b319dbe..1abe587 100644

tests/i915/i915_pm_lpsp.c line 39

Quoted 10 lines
tests/i915/i915_pm_lpsp.c +7 -0
@@ -30,26 +30,68 @@
  #include <fcntl.h>
  #include <unistd.h>
 
+#include "igt_sysfs.h"
+
+#define   HSW_PW_CTL_IDX_GLOBAL                 15
+#define   SKL_PW_CTL_IDX_PW_2                   15
+#define   ICL_PW_CTL_IDX_PW_3                   2
+
+#define   HSW_PWR_WELL_CTL_REQ(pw_idx)          (0x2 << ((pw_idx) * 2))

HSW_PWR_WELL_CTL_REQ can be removed as not used anywhere.

tests/i915/i915_pm_lpsp.c line 40

Quoted 1 line
tests/i915/i915_pm_lpsp.c +1 -0
+#define   HSW_PWR_WELL_CTL_STATE(pw_idx)        (0x1 << ((pw_idx) * 2))

I can understand that here tried to follow similar driver design to calculate mask for power well register,
but validation point of view not necessarily need to have same design like driver and maybe better not to follow to catch driver issue if possible.

As per me, <platform>_PW2_ENABLE_MASK is sufficient to check the state of power well 2.

Quoted 5 lines
tests/i915/i915_pm_lpsp.c +5 -0
+
+#define DUMP_DBGFS(file1, file2, fd)			\
+	"%s:\n%s\n%s:\n%s\n", file1,			\
+	igt_sysfs_get(fd, file1), file2,		\
+	igt_sysfs_get(fd, file2)			\

tests/i915/i915_pm_lpsp.c line 54

Quoted 10 lines
tests/i915/i915_pm_lpsp.c +6 -1
 
  static bool supports_lpsp(uint32_t devid)
  {
-	return IS_HASWELL(devid) || IS_BROADWELL(devid);
+	return IS_HASWELL(devid) || IS_BROADWELL(devid)
+				 || AT_LEAST_GEN(devid, 9);
+}
+
+static int get_no_lpsp_pw_idx(uint32_t devid)
+{

We can return <platform>_PW2_ENABLE_MASK from this function. Function name should be updated accordingly.

Regards,
Animesh

Quoted 119 lines
tests/i915/i915_pm_lpsp.c +47 -15
+	int no_lpsp_pw_idx;
+
+	if (IS_HASWELL(devid) || IS_BROADWELL(devid))
+		no_lpsp_pw_idx = HSW_PW_CTL_IDX_GLOBAL;
+	else if (IS_GEN(devid, 11))
+		no_lpsp_pw_idx = ICL_PW_CTL_IDX_PW_3;
+	else if (AT_LEAST_GEN(devid, 9))
+		no_lpsp_pw_idx = SKL_PW_CTL_IDX_PW_2;
+	else
+		no_lpsp_pw_idx = -1;
+
+	return no_lpsp_pw_idx;
  }
 
-static bool lpsp_is_enabled(int drm_fd)
+static bool lpsp_is_enabled(uint32_t devid)
  {
-	uint32_t val;
+	uint32_t val, mask;
+	int pw_idx;
+
+	pw_idx = get_no_lpsp_pw_idx(devid);
+	igt_require(pw_idx > 0);
+	mask = HSW_PWR_WELL_CTL_STATE(pw_idx);
 
  	val = INREG(HSW_PWR_WELL_CTL2);
-	return !(val & HSW_PWR_WELL_STATE_ENABLED);
+	return !(val & mask);
  }
 
  /* The LPSP mode is all about an enabled pipe, but we expect to also be in the
   * low power mode when no pipes are enabled, so do this check anyway. */
-static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res)
+static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res,
+				     uint32_t devid, int fd)
  {
  	kmstest_unset_all_crtcs(drm_fd, drm_res);
-	igt_assert(lpsp_is_enabled(drm_fd));
+
+	/* Some times delayed audio codec disabling causes to fail the test.
+	 * Using igt_wait to check lpsp after drm_mode_setcrtc().
+	 */
+	igt_assert_f(igt_wait(lpsp_is_enabled(devid), 1000, 100),
+		     DUMP_DBGFS("i915_runtime_pm_status",
+				"i915_power_domain_info", fd));
  }
 
  static uint32_t create_fb(int drm_fd, int width, int height)
@@ -62,7 +104,7 @@ static uint32_t create_fb(int drm_fd, int width, int height)
 
  static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
  			drmModeConnectorPtr *drm_connectors, uint32_t devid,
-			bool use_panel_fitter)
+			bool use_panel_fitter, int fd)
  {
  	int i, rc;
  	uint32_t crtc_id = 0, buffer_id = 0;
@@ -133,16 +175,18 @@ static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
 
  	if (use_panel_fitter) {
  		if (IS_HASWELL(devid))
-			igt_assert(!lpsp_is_enabled(drm_fd));
+			igt_assert(!lpsp_is_enabled(devid));
  		else
-			igt_assert(lpsp_is_enabled(drm_fd));
+			igt_assert(lpsp_is_enabled(devid));
  	} else {
-		igt_assert(lpsp_is_enabled(drm_fd));
+		igt_assert_f(lpsp_is_enabled(devid),
+			     DUMP_DBGFS("i915_runtime_pm_status",
+					"i915_power_domain_info", fd));
  	}
  }
 
-static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res,
-			    drmModeConnectorPtr *drm_connectors)
+static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res, uint32_t devid,
+			    drmModeConnectorPtr *drm_connectors, int fd)
  {
  	int i, rc;
  	uint32_t crtc_id = 0, buffer_id = 0;
@@ -177,8 +221,9 @@ static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res,
  	rc = drmModeSetCrtc(drm_fd, crtc_id, buffer_id, 0, 0,
  			    &connector->connector_id, 1, mode);
  	igt_assert_eq(rc, 0);
-
-	igt_assert(!lpsp_is_enabled(drm_fd));
+	igt_assert_f(!lpsp_is_enabled(devid),
+		     DUMP_DBGFS("i915_runtime_pm_status",
+				"i915_power_domain_info", fd));
  }
 
  #define MAX_CONNECTORS 32
@@ -190,6 +235,8 @@ drmModeConnectorPtr drm_connectors[MAX_CONNECTORS];
 
  igt_main
  {
+	int debugfs;
+
  	igt_fixture {
  		int i;
 
@@ -212,17 +259,22 @@ igt_main
 
  		intel_register_access_init(intel_get_pci_device(), 0, drm_fd);
 
+		igt_require(get_no_lpsp_pw_idx(devid) > 0);
  		kmstest_set_vt_graphics_mode();
+		debugfs = igt_debugfs_dir(drm_fd);
  	}
 
  	igt_subtest("screens-disabled")
-		screens_disabled_subtest(drm_fd, drm_res);
+		screens_disabled_subtest(drm_fd, drm_res, devid, debugfs);
  	igt_subtest("edp-native")
-		edp_subtest(drm_fd, drm_res, drm_connectors, devid, false);
+		edp_subtest(drm_fd, drm_res, drm_connectors, devid, false,
+			    debugfs);
  	igt_subtest("edp-panel-fitter")

tests/i915/i915_pm_lpsp.c igt_main · line 280

Quoted 10 lines
tests/i915/i915_pm_lpsp.c +4 -2
-		edp_subtest(drm_fd, drm_res, drm_connectors, devid, true);
+		edp_subtest(drm_fd, drm_res, drm_connectors, devid, true,
+			    debugfs);
  	igt_subtest("non-edp")
-		non_edp_subtest(drm_fd, drm_res, drm_connectors);
+		non_edp_subtest(drm_fd, drm_res, devid, drm_connectors,
+				debugfs);
 
  	igt_fixture {
  		int i;

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#3 lore raw

PATCH v5 2/4 igt/i915/i915_pm_lpsp check lpsp relevance on non edp panel.

In reply to Anshuman Gupta

Earlier on HSW/BDW it was assumed that only eDP panel will act as lpsp. But that is not true now.
So checking whether a non edp panel can act as lpsp or not.

v2: CI igt fixures.
v3: CI igt fixture.

---
 tests/i915/i915_pm_lpsp.c | 67 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 64 insertions(+), 3 deletions(-)
tests/i915/i915_pm_lpsp.c +64 -3
index 1abe587..f699edc 100644
@@ -38,6 +38,7 @@
 
 #define   HSW_PWR_WELL_CTL_REQ(pw_idx)          (0x2 << ((pw_idx) * 2))
 #define   HSW_PWR_WELL_CTL_STATE(pw_idx)        (0x1 << ((pw_idx) * 2))
+#define   LPSP_PORT				'A'
 
 #define DUMP_DBGFS(file1, file2, fd)			\
 	"%s:\n%s\n%s:\n%s\n", file1,			\
@@ -79,6 +80,55 @@ static bool lpsp_is_enabled(uint32_t devid)
 	return !(val & mask);
 }
 
+static bool is_non_edp_ddia_port(FILE *file, char *info)
+{
+	int ret;
+	char ddi[256];
+	char port;
+	bool ddi_a_port = false;
+
+	while (fgets(info, 256, file)) {
+		if (strstr(info, "encoder")) {
+			ret = sscanf(info, "%*s %*s %*s %s %c", ddi, &port);
+			igt_assert_eq(ret, 2);
+			if (!strcmp(ddi, "DDI") && port == LPSP_PORT)
+				ddi_a_port = true;
+		}
+		if (strstr(info, "connector") && strstr(info, "eDP"))
+			ddi_a_port = false;
+	}
+	return ddi_a_port;
+}
+
+static bool non_edp_lpsp_check(int device)
+{
+	char tmp[256];
+	FILE *file;
+	int line;
+	int fd;
+	bool is_lpsp = false;
+
+	fd = igt_debugfs_open(device, "i915_display_info", O_RDONLY);
+	file = fdopen(fd, "r");
+	igt_skip_on(!file);
+
+	line = 0;
+	while (fgets(tmp, 256, file)) {
+		if (strstr(tmp, "CRTC") && line > 0) {
+			if (strstr(tmp, "pipe: A") &&
+			    strstr(tmp, "active=yes")) {
+				is_lpsp = is_non_edp_ddia_port(file, tmp);
+				break;
+			}
+		}
+		line++;
+	}
+
+	fclose(file);
+	close(fd);
+	return is_lpsp;
+}
+
 /* The LPSP mode is all about an enabled pipe, but we expect to also be in the
  * low power mode when no pipes are enabled, so do this check anyway. */
 static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res,
@@ -221,9 +271,20 @@ static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res, uint32_t devid,
 	rc = drmModeSetCrtc(drm_fd, crtc_id, buffer_id, 0, 0,
 			    &connector->connector_id, 1, mode);
 	igt_assert_eq(rc, 0);
-	igt_assert_f(!lpsp_is_enabled(devid),
-		     DUMP_DBGFS("i915_runtime_pm_status",
-				"i915_power_domain_info", fd));
+
+	if (non_edp_lpsp_check(drm_fd) ||
+	    connector->connector_type == DRM_MODE_CONNECTOR_DSI)
+		/* Some times delayed audio codec disabling causes to fail the.
+		 * the test. Using igt_wait to check lpsp after
+		 * drm_mode_setcrtc().
+		 */
+		igt_assert_f(igt_wait(lpsp_is_enabled(devid), 1000, 100),
+			     DUMP_DBGFS("i915_runtime_pm_status",
+					"i915_power_domain_info", fd));
+	else
+		igt_assert_f(!lpsp_is_enabled(devid),
+			     DUMP_DBGFS("i915_runtime_pm_status",
+					"i915_power_domain_info", fd));
 }
 
 #define MAX_CONNECTORS 32
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#4 lore raw

Re: [igt-dev] [PATCH i-g-t v5 2/4] igt/i915/i915_pm_lpsp check lpsp relevance on non edp panel.

Hi,

Quoted 18 lines · Anshuman Gupta

Earlier on HSW/BDW it was assumed that only eDP panel will act as lpsp. But that is not true now.
So checking whether a non edp panel can act as lpsp or not.

v2: CI igt fixures.
v3: CI igt fixture.

---
  tests/i915/i915_pm_lpsp.c | 67 ++++++++++++++++++++++++++++++++++++++++++++---
  1 file changed, 64 insertions(+), 3 deletions(-)
tests/i915/i915_pm_lpsp.c +0 -0
index 1abe587..f699edc 100644

tests/i915/i915_pm_lpsp.c line 41

Quoted 4 lines
tests/i915/i915_pm_lpsp.c +1 -0
@@ -38,6 +38,7 @@
 
  #define   HSW_PWR_WELL_CTL_REQ(pw_idx)          (0x2 << ((pw_idx) * 2))
  #define   HSW_PWR_WELL_CTL_STATE(pw_idx)        (0x1 << ((pw_idx) * 2))
+#define   LPSP_PORT				'A'

Rename LPSP_PORT to <platform>_LPSP_PORT as all platform may not support, also don't know the future. As per me, SKL_LPSP_PORT will be correct till ICL as they follow similar design.

Regards,
Animesh

Quoted 73 lines
tests/i915/i915_pm_lpsp.c +56 -3
  #define DUMP_DBGFS(file1, file2, fd)			\
  	"%s:\n%s\n%s:\n%s\n", file1,			\
@@ -79,6 +80,55 @@ static bool lpsp_is_enabled(uint32_t devid)
  	return !(val & mask);
  }
 
+static bool is_non_edp_ddia_port(FILE *file, char *info)
+{
+	int ret;
+	char ddi[256];
+	char port;
+	bool ddi_a_port = false;
+
+	while (fgets(info, 256, file)) {
+		if (strstr(info, "encoder")) {
+			ret = sscanf(info, "%*s %*s %*s %s %c", ddi, &port);
+			igt_assert_eq(ret, 2);
+			if (!strcmp(ddi, "DDI") && port == LPSP_PORT)
+				ddi_a_port = true;
+		}
+		if (strstr(info, "connector") && strstr(info, "eDP"))
+			ddi_a_port = false;
+	}
+	return ddi_a_port;
+}
+
+static bool non_edp_lpsp_check(int device)
+{
+	char tmp[256];
+	FILE *file;
+	int line;
+	int fd;
+	bool is_lpsp = false;
+
+	fd = igt_debugfs_open(device, "i915_display_info", O_RDONLY);
+	file = fdopen(fd, "r");
+	igt_skip_on(!file);
+
+	line = 0;
+	while (fgets(tmp, 256, file)) {
+		if (strstr(tmp, "CRTC") && line > 0) {
+			if (strstr(tmp, "pipe: A") &&
+			    strstr(tmp, "active=yes")) {
+				is_lpsp = is_non_edp_ddia_port(file, tmp);
+				break;
+			}
+		}
+		line++;
+	}
+
+	fclose(file);
+	close(fd);
+	return is_lpsp;
+}
+
  /* The LPSP mode is all about an enabled pipe, but we expect to also be in the
   * low power mode when no pipes are enabled, so do this check anyway. */
  static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res,
@@ -221,9 +271,20 @@ static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res, uint32_t devid,
  	rc = drmModeSetCrtc(drm_fd, crtc_id, buffer_id, 0, 0,
  			    &connector->connector_id, 1, mode);
  	igt_assert_eq(rc, 0);
-	igt_assert_f(!lpsp_is_enabled(devid),
-		     DUMP_DBGFS("i915_runtime_pm_status",
-				"i915_power_domain_info", fd));
+
+	if (non_edp_lpsp_check(drm_fd) ||
+	    connector->connector_type == DRM_MODE_CONNECTOR_DSI)
+		/* Some times delayed audio codec disabling causes to fail the.
+		 * the test. Using igt_wait to check lpsp after
+		 * drm_mode_setcrtc().
+		 */

tests/i915/i915_pm_lpsp.c static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res, uint32_t devid, · line 290

Quoted 10 lines
tests/i915/i915_pm_lpsp.c +7 -0
+		igt_assert_f(igt_wait(lpsp_is_enabled(devid), 1000, 100),
+			     DUMP_DBGFS("i915_runtime_pm_status",
+					"i915_power_domain_info", fd));
+	else
+		igt_assert_f(!lpsp_is_enabled(devid),
+			     DUMP_DBGFS("i915_runtime_pm_status",
+					"i915_power_domain_info", fd));
  }
 
  #define MAX_CONNECTORS 32

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#5 lore raw

PATCH v5 3/4 igt/i915/i915_pm_lpsp: panel-fitter subtest modifications.

In reply to Anshuman Gupta

It makes sense to skip the test if edp-panel native resoultion is limted to 1024x768 rather than failing the test. Dumping i915_runtime_pm_status and i915_power_domain_info if test fails.
Small improvment in panel-fitter condition which check lpsp_enabled().

---
 tests/i915/i915_pm_lpsp.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)
tests/i915/i915_pm_lpsp.c +9 -11
index f699edc..0156957 100644
@@ -201,10 +201,10 @@ static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
 			 * support LPSP are too new for panels with native
 			 * 1024x768 resolution, so this should force the panel
 			 * fitter. */
-			igt_assert(c->count_modes &&
-				   c->modes[0].hdisplay > 1024);
-			igt_assert(c->count_modes &&
-				   c->modes[0].vdisplay > 768);
+			igt_require(c->count_modes &&
+				    c->modes[0].hdisplay > 1024);
+			igt_require(c->count_modes &&
+				    c->modes[0].vdisplay > 768);
 			mode = &std_1024_mode;
 			break;
 		}
@@ -223,16 +223,14 @@ static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
 			    &connector->connector_id, 1, mode);
 	igt_assert_eq(rc, 0);
 
-	if (use_panel_fitter) {
-		if (IS_HASWELL(devid))
-			igt_assert(!lpsp_is_enabled(devid));
-		else
-			igt_assert(lpsp_is_enabled(devid));
-	} else {
+	if (use_panel_fitter && IS_HASWELL(devid))
+		igt_assert_f(!lpsp_is_enabled(devid),
+			     DUMP_DBGFS("i915_runtime_pm_status",
+					"i915_power_domain_info", fd));
+	else
 		igt_assert_f(lpsp_is_enabled(devid),
 			     DUMP_DBGFS("i915_runtime_pm_status",
 					"i915_power_domain_info", fd));
-	}
 }
 
 static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res, uint32_t devid,
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#6 lore raw

Re: [igt-dev] [PATCH i-g-t v5 3/4] igt/i915/i915_pm_lpsp: panel-fitter subtest modifications.

Hi,

Quoted 44 lines · Anshuman Gupta

It makes sense to skip the test if edp-panel native resoultion is limted to 1024x768 rather than failing the test. Dumping i915_runtime_pm_status and i915_power_domain_info if test fails.
Small improvment in panel-fitter condition which check lpsp_enabled().

---
  tests/i915/i915_pm_lpsp.c | 20 +++++++++-----------
  1 file changed, 9 insertions(+), 11 deletions(-)
tests/i915/i915_pm_lpsp.c +6 -10
index f699edc..0156957 100644
@@ -201,10 +201,10 @@ static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
  			 * support LPSP are too new for panels with native
  			 * 1024x768 resolution, so this should force the panel
  			 * fitter. */
-			igt_assert(c->count_modes &&
-				   c->modes[0].hdisplay > 1024);
-			igt_assert(c->count_modes &&
-				   c->modes[0].vdisplay > 768);
+			igt_require(c->count_modes &&
+				    c->modes[0].hdisplay > 1024);
+			igt_require(c->count_modes &&
+				    c->modes[0].vdisplay > 768);
  			mode = &std_1024_mode;
  			break;
  		}
@@ -223,16 +223,14 @@ static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
  			    &connector->connector_id, 1, mode);
  	igt_assert_eq(rc, 0);
 
-	if (use_panel_fitter) {
-		if (IS_HASWELL(devid))
-			igt_assert(!lpsp_is_enabled(devid));
-		else
-			igt_assert(lpsp_is_enabled(devid));
-	} else {
+	if (use_panel_fitter && IS_HASWELL(devid))
+		igt_assert_f(!lpsp_is_enabled(devid),

tests/i915/i915_pm_lpsp.c static void edp_subtest(int drm_fd, drmModeResPtr drm_res, · line 236

Quoted 10 lines
tests/i915/i915_pm_lpsp.c +3 -1
+			     DUMP_DBGFS("i915_runtime_pm_status",
+					"i915_power_domain_info", fd));
+	else
  		igt_assert_f(lpsp_is_enabled(devid),
  			     DUMP_DBGFS("i915_runtime_pm_status",
  					"i915_power_domain_info", fd));
-	}
  }
 
  static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res, uint32_t devid,

Changes looks ok to me.

Regards,
Animesh
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#7 lore raw

PATCH v5 4/4 DO_NOT_MERGE add i915_pm_lpsp subtests to CI fast feedback list.

In reply to Anshuman Gupta

This patch adds below i915_pm_lpsp subtests to CI fast feedback list in order to test these subtest on ICL
(which is affected platform).
Subtests:
screens-disabled
edp-native
edp-panel-fitter
non-edp

---
 tests/intel-ci/fast-feedback.testlist | 4 ++++
 1 file changed, 4 insertions(+)
tests/intel-ci/fast-feedback.testlist +4 -0
index 40475b1..670f0a2 100644
@@ -216,6 +216,10 @@ igt@kms_psr@sprite_plane_onoff
 igt@kms_psr@primary_mmap_gtt
 igt@kms_setmode@basic-clone-single-crtc
 igt@i915_pm_backlight@basic-brightness
+igt@i915_pm_lpsp@edp-native
+igt@i915_pm_lpsp@edp-panel-fitter
+igt@i915_pm_lpsp@non-edp
+igt@i915_pm_lpsp@screens-disabled
 igt@i915_pm_rpm@basic-pci-d3-state
 igt@i915_pm_rpm@basic-rte
 igt@i915_pm_rps@basic-api
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#8 lore raw
In reply to Anshuman Gupta

Hi,

Quoted 9 lines · Anshuman Gupta

This is v5 version after enabling edp-panel-fitter sub-test in this series.

This series has added i915_pm_lpsp subtests to CI fast feedback list in order to run cover these subtest on all affected platforms.

Revision 1 Link:  https://patchwork.freedesktop.org/series/58051/
Revision 2 Link:  https://patchwork.freedesktop.org/series/59048/

Did not find any condition check for MIPI panel which also can be in lpsp (low power single pipe) mode. Any idea?

Regards,
Animesh

Quoted 11 lines

Anshuman Gupta (4):
igt/i915/i915_pm_lpsp enable pm_lpsp for platforms till Gen11. igt/i915/i915_pm_lpsp check lpsp relevance on non edp panel. igt/i915/i915_pm_lpsp: panel-fitter subtest modifications. DO_NOT_MERGE add i915_pm_lpsp subtests to CI fast feedback list.

  tests/i915/i915_pm_lpsp.c             | 163 ++++++++++++++++++++++++++++------
  tests/intel-ci/fast-feedback.testlist |   4 +
  2 files changed, 141 insertions(+), 26 deletions(-)

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#9 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for enable pm_lpsp for platforms till Gen11 v5

In reply to Anshuman Gupta
== Series Details ==

== Series Details ==

Series: enable pm_lpsp for platforms till Gen11 v5
URL : https://patchwork.freedesktop.org/series/60465/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_6070 -> IGTPW_2958
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://patchwork.freedesktop.org/api/1.0/series/60465/revisions/1/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2958:

### IGT changes ###

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@i915_pm_lpsp@non-edp:
- {fi-cml-u}: NOTRUN -> [SKIP][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/fi-cml-u/igt@[email protected]
- {fi-icl-y}: NOTRUN -> [SKIP][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/fi-icl-y/igt@[email protected]

Known issues
------------

Here are the changes found in IGTPW_2958 that come from known issues:

### IGT changes ###

#### Possible fixes ####

* igt@gem_cpu_reloc@basic:
- {fi-cml-u2}: [INCOMPLETE][3] -> [PASS][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/fi-cml-u2/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/fi-cml-u2/igt@[email protected]

* igt@i915_module_load@reload:
- fi-ilk-650: [DMESG-WARN][5] ([fdo#106387]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/fi-ilk-650/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/fi-ilk-650/igt@[email protected]

* igt@i915_pm_rpm@module-reload:
- fi-skl-6770hq: [FAIL][7] ([fdo#108511]) -> [PASS][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/fi-skl-6770hq/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/fi-skl-6770hq/igt@[email protected]

* igt@i915_selftest@live_hangcheck:
- fi-skl-iommu: [INCOMPLETE][9] ([fdo#108602] / [fdo#108744]) -> [PASS][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/fi-skl-iommu/igt@i915_selftest@live_hangcheck.html
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/fi-skl-iommu/igt@i915_selftest@live_hangcheck.html

#### Warnings ####

* igt@i915_selftest@live_hangcheck:
- fi-apl-guc: [DMESG-FAIL][11] ([fdo#110620]) -> [INCOMPLETE][12] ([fdo#103927] / [fdo#110624])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/fi-apl-guc/igt@i915_selftest@live_hangcheck.html
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/fi-apl-guc/igt@i915_selftest@live_hangcheck.html

* igt@runner@aborted:
- fi-apl-guc: [FAIL][13] ([fdo#110622]) -> [FAIL][14] ([fdo#110624])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/fi-apl-guc/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/fi-apl-guc/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#106387]: https://bugs.freedesktop.org/show_bug.cgi?id=106387
[fdo#108511]: https://bugs.freedesktop.org/show_bug.cgi?id=108511
[fdo#108602]: https://bugs.freedesktop.org/show_bug.cgi?id=108602
[fdo#108744]: https://bugs.freedesktop.org/show_bug.cgi?id=108744
[fdo#110620]: https://bugs.freedesktop.org/show_bug.cgi?id=110620
[fdo#110622]: https://bugs.freedesktop.org/show_bug.cgi?id=110622
[fdo#110624]: https://bugs.freedesktop.org/show_bug.cgi?id=110624

Participating hosts (51 -> 45)
------------------------------

Missing (6): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper

Build changes
-------------

* IGT: IGT_4976 -> IGTPW_2958

CI_DRM_6070: 5bf8116fc0dc2cc0fe344a7c7f45dfd44a93d5a5 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2958: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/
IGT_4976: b1d91d0228db999145405e529952ca49bab7f706 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#10 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for enable pm_lpsp for platforms till Gen11 v5

In reply to Anshuman Gupta
== Series Details ==

== Series Details ==

Series: enable pm_lpsp for platforms till Gen11 v5
URL : https://patchwork.freedesktop.org/series/60465/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_6070_full -> IGTPW_2958_full
====================================================

Summary
-------

**WARNING**

Minor unknown changes coming with IGTPW_2958_full need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_2958_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://patchwork.freedesktop.org/api/1.0/series/60465/revisions/1/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2958_full:

### IGT changes ###

#### Warnings ####

* igt@i915_pm_lpsp@non-edp:
- shard-iclb: [SKIP][1] ([fdo#109301]) -> [SKIP][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-iclb4/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-iclb5/igt@[email protected]

Known issues
------------

Here are the changes found in IGTPW_2958_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_color@pipe-c-ctm-green-to-red:
- shard-kbl: [PASS][3] -> [FAIL][4] ([fdo#107201])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-kbl7/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-kbl3/igt@[email protected]
- shard-apl: [PASS][5] -> [FAIL][6] ([fdo#107201])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-apl6/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-apl3/igt@[email protected]

* igt@kms_cursor_crc@cursor-256x256-suspend:
- shard-kbl: [PASS][7] -> [DMESG-WARN][8] ([fdo#108566]) +6 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-kbl6/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-kbl1/igt@[email protected]

* igt@kms_flip@2x-flip-vs-expired-vblank:
- shard-glk: [PASS][9] -> [FAIL][10] ([fdo#105363])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-glk3/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-glk4/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-rgb565-draw-pwrite:
- shard-iclb: [PASS][11] -> [FAIL][12] ([fdo#103167]) +2 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-iclb2/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-iclb1/igt@[email protected]

* igt@kms_psr@psr2_primary_mmap_gtt:
- shard-iclb: [PASS][13] -> [SKIP][14] ([fdo#109441])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-iclb2/igt@kms_psr@psr2_primary_mmap_gtt.html
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-iclb6/igt@kms_psr@psr2_primary_mmap_gtt.html

* igt@kms_vblank@pipe-c-ts-continuation-suspend:
- shard-apl: [PASS][15] -> [DMESG-WARN][16] ([fdo#108566]) +5 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-apl7/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-apl1/igt@[email protected]

* igt@tools_test@tools_test:
- shard-apl: [PASS][17] -> [SKIP][18] ([fdo#109271])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-apl7/igt@tools_test@tools_test.html
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-apl4/igt@tools_test@tools_test.html
- shard-iclb: [PASS][19] -> [SKIP][20] ([fdo#109352])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-iclb6/igt@tools_test@tools_test.html
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-iclb5/igt@tools_test@tools_test.html

#### Possible fixes ####

* igt@gem_ctx_isolation@vcs0-s3:
- shard-kbl: [DMESG-WARN][21] ([fdo#108566]) -> [PASS][22] +1 similar issue
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-kbl1/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-kbl5/igt@[email protected]

* igt@i915_pm_lpsp@edp-native:
- shard-iclb: [SKIP][23] ([fdo#109301]) -> [PASS][24] +2 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-iclb5/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-iclb6/igt@[email protected]

* igt@i915_pm_lpsp@non-edp:
- shard-glk: [SKIP][25] ([fdo#109271]) -> [PASS][26] +1 similar issue
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-glk6/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-glk7/igt@[email protected]
- shard-kbl: [SKIP][27] ([fdo#109271]) -> [PASS][28] +1 similar issue
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-kbl6/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-kbl1/igt@[email protected]

* igt@i915_pm_lpsp@screens-disabled:
- shard-apl: [SKIP][29] ([fdo#109271]) -> [PASS][30] +1 similar issue
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-apl2/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-apl3/igt@[email protected]

* igt@kms_cursor_crc@cursor-256x85-random:
- shard-apl: [FAIL][31] ([fdo#103232]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-apl4/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-apl1/igt@[email protected]
- shard-kbl: [FAIL][33] ([fdo#103232]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-kbl6/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-kbl6/igt@[email protected]

* igt@kms_flip@plain-flip-fb-recreate:
- shard-hsw: [INCOMPLETE][35] ([fdo#103540]) -> [PASS][36]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-hsw4/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-hsw1/igt@[email protected]
- shard-glk: [FAIL][37] ([fdo#100368]) -> [PASS][38]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-glk5/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-glk7/igt@[email protected]

* igt@kms_flip_tiling@flip-to-y-tiled:
- shard-iclb: [FAIL][39] ([fdo#107931] / [fdo#108134]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-iclb6/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-iclb1/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-cur-indfb-onoff:
- shard-hsw: [SKIP][41] ([fdo#109271]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-hsw7/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-hsw2/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-suspend:
- shard-apl: [DMESG-WARN][43] ([fdo#108566]) -> [PASS][44] +5 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-apl1/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-apl8/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-shrfb-draw-pwrite:
- shard-iclb: [FAIL][45] ([fdo#103167]) -> [PASS][46] +7 similar issues
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-iclb6/igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-shrfb-draw-pwrite.html
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-iclb2/igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-shrfb-draw-pwrite.html

* igt@kms_plane_lowres@pipe-a-tiling-x:
- shard-iclb: [FAIL][47] ([fdo#103166]) -> [PASS][48] +1 similar issue
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-iclb1/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-iclb3/igt@[email protected]

* igt@kms_psr@psr2_sprite_blt:
- shard-iclb: [SKIP][49] ([fdo#109441]) -> [PASS][50] +1 similar issue
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-iclb3/igt@kms_psr@psr2_sprite_blt.html
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-iclb2/igt@kms_psr@psr2_sprite_blt.html

* igt@kms_setmode@basic:
- shard-kbl: [FAIL][51] ([fdo#99912]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-kbl5/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-kbl4/igt@[email protected]

* igt@kms_vblank@pipe-a-ts-continuation-suspend:
- shard-snb: [DMESG-WARN][53] ([fdo#102365]) -> [PASS][54]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6070/shard-snb4/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/shard-snb6/igt@[email protected]

[fdo#100368]: https://bugs.freedesktop.org/show_bug.cgi?id=100368
[fdo#102365]: https://bugs.freedesktop.org/show_bug.cgi?id=102365
[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#107201]: https://bugs.freedesktop.org/show_bug.cgi?id=107201
[fdo#107931]: https://bugs.freedesktop.org/show_bug.cgi?id=107931
[fdo#108134]: https://bugs.freedesktop.org/show_bug.cgi?id=108134
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109301]: https://bugs.freedesktop.org/show_bug.cgi?id=109301
[fdo#109352]: https://bugs.freedesktop.org/show_bug.cgi?id=109352
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912

Participating hosts (10 -> 6)
------------------------------

Missing (4): pig-skl-6260u shard-skl pig-hsw-4770r pig-glk-j5005

Build changes
-------------

* IGT: IGT_4976 -> IGTPW_2958
* Piglit: piglit_4509 -> None

CI_DRM_6070: 5bf8116fc0dc2cc0fe344a7c7f45dfd44a93d5a5 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2958: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/
IGT_4976: b1d91d0228db999145405e529952ca49bab7f706 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2958/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev