Skip to contentSkip to conversation

ath10k: enabling tx stats support over pktlog

PATCH In review Balaji Pothunoori 2 participants 3 messages May 13, 2019 – Jun 25, 2019 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ath10k: enabling tx stats support over pktlog

For QCA988X target, pktlog gives details of the tx bitrate which is used in the driver for station info.

Enabling pktlog by default will cause more interrupts in target to host CE pipe, which can impact more CPU usage for targets ex:WCN3990 and also not required for all other platforms (eg: WCN3990), for getting tx bitrate.

Enable pktlog only for QCA988X based on hardware params.

Tested HW : WCN3990
Tested FW : WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes e8123bb74c4e ("ath10k: add per peer tx stats support for 10.2.4")
---
 drivers/net/wireless/ath/ath10k/core.c | 15 +++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  3 +++
 drivers/net/wireless/ath/ath10k/mac.c  |  3 ++-
 3 files changed, 20 insertions(+), 1 deletion(-)
drivers/net/wireless/ath/ath10k/core.c +15 -0
index 61ef903..252e9af 100644
@@ -83,6 +83,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = false,
+		.tx_stats_over_pktlog = true,
 	},
 	{
 		.id = QCA988X_HW_2_0_VERSION,
@@ -117,6 +118,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = false,
+		.tx_stats_over_pktlog = true,
 	},
 	{
 		.id = QCA9887_HW_1_0_VERSION,
@@ -152,6 +154,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = false,
+		.tx_stats_over_pktlog = false,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -179,6 +182,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.ast_skid_limit = 0x10,
 		.num_wds_entries = 0x20,
 		.uart_pin_workaround = true,
+		.tx_stats_over_pktlog = false,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -213,6 +217,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = false,
+		.tx_stats_over_pktlog = false,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -247,6 +252,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = false,
+		.tx_stats_over_pktlog = false,
 	},
 	{
 		.id = QCA6174_HW_3_0_VERSION,
@@ -281,6 +287,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = false,
+		.tx_stats_over_pktlog = false,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -318,6 +325,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = true,
+		.tx_stats_over_pktlog = false,
 	},
 	{
 		.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -358,6 +366,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = false,
+		.tx_stats_over_pktlog = false,
 	},
 	{
 		.id = QCA9984_HW_1_0_DEV_VERSION,
@@ -405,6 +414,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = false,
+		.tx_stats_over_pktlog = false,
 	},
 	{
 		.id = QCA9888_HW_2_0_DEV_VERSION,
@@ -449,6 +459,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = false,
+		.tx_stats_over_pktlog = false,
 	},
 	{
 		.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -483,6 +494,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = false,
+		.tx_stats_over_pktlog = false,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -519,6 +531,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = true,
+		.tx_stats_over_pktlog = false,
 	},
 	{
 		.id = QCA4019_HW_1_0_DEV_VERSION,
@@ -560,6 +573,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = false,
 		.hw_filter_reset_required = true,
 		.fw_diag_ce_download = false,
+		.tx_stats_over_pktlog = false,
 	},
 	{
 		.id = WCN3990_HW_1_0_DEV_VERSION,
@@ -587,6 +601,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rri_on_ddr = true,
 		.hw_filter_reset_required = false,
 		.fw_diag_ce_download = false,
+		.tx_stats_over_pktlog = false,
 	},
 };
 
drivers/net/wireless/ath/ath10k/hw.h +3 -0
index 248cfb4..1e80beb 100644
@@ -612,6 +612,9 @@ struct ath10k_hw_params {
 	 * firmware bug
 	 */
 	bool uart_pin_workaround;
+
+	/* tx stats support over pktlog */
+	bool tx_stats_over_pktlog;
 };
 
 struct htt_rx_desc;
drivers/net/wireless/ath/ath10k/mac.c +2 -1
index b500fd4..40e7cea 100644
@@ -7877,7 +7877,8 @@ ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 				    arvif->vdev_id, ret);
 	}
 
-	if (ath10k_peer_stats_enabled(ar)) {
+	if (ath10k_peer_stats_enabled(ar) &&
+	    ar->hw_params.tx_stats_over_pktlog) {
 		ar->pktlog_filter |= ATH10K_PKTLOG_PEER_STATS;
 		ret = ath10k_wmi_pdev_pktlog_enable(ar,
 						    ar->pktlog_filter);
Signature · 7 lines
2.7.4


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#1 lore raw
Quoted 8 lines · Balaji Pothunoori

For QCA988X target, pktlog gives details of the tx bitrate which is used in the driver for station info.

Enabling pktlog by default will cause more interrupts in target to host CE pipe, which can impact more CPU usage for targets ex:WCN3990 and also not required for all other platforms (eg: WCN3990), for getting tx bitrate.

Quoted 8 lines

Enable pktlog only for QCA988X based on hardware params.

Tested HW : WCN3990
Tested FW : WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes e8123bb74c4e ("ath10k: add per peer tx stats support for 10.2.4")

Patch applied to ath-next branch of ath.git, thanks.

4fa42adebe5b ath10k: enabling tx stats support over pktlog

Signature · 3 lines
https://patchwork.kernel.org/patch/10941167/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
#2 lore raw
In reply to Balaji Pothunoori
Quoted 8 lines · Balaji Pothunoori

For QCA988X target, pktlog gives details of the tx bitrate which is used in the driver for station info.

Enabling pktlog by default will cause more interrupts in target to host CE pipe, which can impact more CPU usage for targets ex:WCN3990 and also not required for all other platforms (eg: WCN3990), for getting tx bitrate.

Quoted 8 lines

Enable pktlog only for QCA988X based on hardware params.

Tested HW : WCN3990
Tested FW : WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes e8123bb74c4e ("ath10k: add per peer tx stats support for 10.2.4")

Patch applied to ath-next branch of ath.git, thanks.

4fa42adebe5b ath10k: enabling tx stats support over pktlog

Signature · 9 lines
https://patchwork.kernel.org/patch/10941167/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k