dt-bindings: ASoC: Add tas2770 smart PA dt bindings
PATCH v2 1/1 dt-bindings: ASoC: Add tas2770 smart PA dt bindings
From: Frank Shi <[email protected]>
Add tas2770 smart PA dt bindings
--- .../devicetree/bindings/sound/tas2770.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas2770.txt
Documentation/devicetree/bindings/sound/tas2770.txt new file +37 -0
@@ -0,0 +1,37 @@ +Texas Instruments TAS2770 Smart PA + +The TAS2770 is a mono, digital input Class-D audio amplifier optimized for +efficiently driving high peak power into small loudspeakers. +Integrated speaker voltage and current sense provides for +real time monitoring of loudspeaker behavior. + +Required properties: + + - compatible: - Should contain "ti,tas2770". + - reg: - The i2c address. Should contain <0x4c>, <0x4d>,<0x4e>, or <0x4f>. + - #address-cells - Should be <1>. + - #size-cells - Should be <0>. + - ti,asi-format: - Sets TDM RX capture edge. 0->Rising; 1->Falling. + - ti,imon-slot-no:- TDM TX current sense time slot. + - ti,vmon-slot-no:- TDM TX voltage sense time slot. + +Optional properties: + +- interrupt-parent: the phandle to the interrupt controller which provides + the interrupt. +- interrupts: interrupt specification for data-ready. + +Examples: + + tas2770@4c { + compatible = "ti,tas2770"; + reg = <0x4c>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&msm_gpio>; + interrupts = <97 0>; + ti,asi-format = <0>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; +
Signature · 1 line
2.7.4
PATCH v2 1/1 tas2770: add tas2770 smart PA kernel driver
From: Frank Shi <[email protected]>
add tas2770 smart PA kernel driver
--- sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2770.c | 954 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2770.h | 166 ++++++++ 4 files changed, 1127 insertions(+) create mode 100644 sound/soc/codecs/tas2770.c create mode 100644 sound/soc/codecs/tas2770.h
sound/soc/codecs/Kconfig +5 -0
@@ -111,6 +111,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_STAC9766 if SND_SOC_AC97_BUS select SND_SOC_STI_SAS select SND_SOC_TAS2552 if I2C + select SND_SOC_TAS2770 if I2C select SND_SOC_TAS5086 if I2C select SND_SOC_TAS571X if I2C select SND_SOC_TFA9879 if I2C
@@ -652,6 +653,10 @@ config SND_SOC_TAS2552 tristate "Texas Instruments TAS2552 Mono Audio amplifier" depends on I2C +config SND_SOC_TAS2770 + tristate "Texas Instruments TAS2770 speaker amplifier" + depends on I2C + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C
sound/soc/codecs/Makefile +2 -0
@@ -116,6 +116,7 @@ snd-soc-stac9766-objs := stac9766.o snd-soc-sti-sas-objs := sti-sas.o snd-soc-tas5086-objs := tas5086.o snd-soc-tas571x-objs := tas571x.o +snd-soc-tas2770-objs := tas2770.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tlv320aic23-objs := tlv320aic23.o snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o
@@ -332,6 +333,7 @@ obj-$(CONFIG_SND_SOC_STI_SAS) += snd-soc-sti-sas.o obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o +obj-$(CONFIG_SND_SOC_TAS2770) += snd-soc-tas2770.o obj-$(CONFIG_SND_SOC_TFA9879) += snd-soc-tfa9879.o obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o
sound/soc/codecs/tas2770.c new file +954 -0
954 lines not on this page · raw message
sound/soc/codecs/tas2770.h new file +166 -0
166 lines not on this page · raw message
Signature · 1 line
2.7.4
Mark Brown
maintainerRe: [PATCH v2] tas2770: add tas2770 smart PA kernel driver
sound/soc/codecs/tas2770.c line 10
Quoted 12 lines · On Wed, Sep 11, 2019 at 06:25:29PM +0800, [email protected] wrote:
+++
b/sound/soc/codecs/tas2770.csound/soc/codecs/tas2770.c new file +10
-0@@ -0,0 +1,954 @@ +/* +* SPDX-License-Identifier: GPL-2.0 +* +* ALSA SoC Texas Instruments TAS2770 20-W Digital Input Mono Class-D +* Audio Amplifier with Speaker I/V Sense +* +* Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/ +* Author: Tracy Yi <[email protected]> +* Shi Fu <[email protected]> +*/
This is a C style comment not a C++ style comment.
Quoted 6 lines
sound/soc/codecs/tas2770.c new file +6
-0+static int tas2770_regmap_read (struct tas2770_priv *tas2770, +unsigned int reg,unsigned int *value) +{ +int result =0 ; +int retry_count =TAS2770_I2C_RETRY_COUNT ; +
sound/soc/codecs/tas2770.c line 64
Quoted 10 lines
sound/soc/codecs/tas2770.c new file +10
-0+while (retry_count--) { + result =snd_soc_component_read (tas2770->component, reg, + value); +if (!result) +break ; + +msleep (20 ); + } +if (!retry_count) +return -ETIMEDOUT ;
This appears to be the same as the previous version? It looks like we still have code to hande the device randomly resetting underneath the driver - like I said we really need to understand why that's being done, I'd strongly suggest splitting that code out into a separate patch so we can review the base driver and hopefully merge it while we discuss this reboot support.