scsi: core: allow auto suspend override by low-level driver
Subsystems (2)
v3 cover scsi: core: allow auto suspend override by low-level driver
Until now the scsi mid-layer forbids runtime suspend till userspace enables it. This is mainly to quarantine some disks with broken runtime power management or have high latencies executing suspend resume callbacks. If the userspace doesn't enable the runtime suspend the underlying hardware will be always on even when it is not doing any useful work and thus wasting power.
Some low-level drivers for the controllers can efficiently use runtime power management to reduce power consumption and improve battery life.
This patchset allows runtime suspend parameters override within the LLD itself instead of waiting for userspace to control the power management, and make UFS as the first user of this capability.
v2 => v3:
- Create a member indicating autosuspend delay for the same SCSI host in SCSI host template (Bart)
- Use separate variables to control different things, (Bart)
(a) Whether or not runtime suspend is enabled at device creation time
(b) The power management autosuspend delay
v1 => v2:
- Allow "zero" sdev->rpm_autosuspend_delay (Avri)
- Fix format of some lines (Avri)
Stanley Chu (3):
scsi: core: allow auto suspend override by low-level driver
scsi: ufs: override auto suspend tunables for ufs
scsi: ufs-mediatek: enable auto suspend capability
drivers/scsi/scsi_sysfs.c | 3 ++- drivers/scsi/sd.c | 4 ++++ drivers/scsi/ufs/ufs-mediatek.c | 3 +++ drivers/scsi/ufs/ufshcd.c | 9 +++++++++ drivers/scsi/ufs/ufshcd.h | 10 ++++++++++ include/scsi/scsi_device.h | 2 +- include/scsi/scsi_host.h | 3 +++ 7 files changed, 32 insertions(+), 2 deletions(-)
Signature · 1 line
2.18.0
PATCH v3 1/3 scsi: core: allow auto suspend override by low-level driver
Rework from previous work by:
Sujit Reddy Thumma <[email protected]>
Until now the scsi mid-layer forbids runtime suspend till userspace enables it. This is mainly to quarantine some disks with broken runtime power management or have high latencies executing suspend resume callbacks. If the userspace doesn't enable the runtime suspend the underlying hardware will be always on even when it is not doing any useful work and thus wasting power.
Some low-level drivers for the controllers can efficiently use runtime power management to reduce power consumption and improve battery life. Allow runtime suspend parameters override within the LLD itself instead of waiting for userspace to control the power management.
--- drivers/scsi/scsi_sysfs.c | 3 ++- drivers/scsi/sd.c | 4 ++++ include/scsi/scsi_device.h | 2 +- include/scsi/scsi_host.h | 3 +++ 4 files changed, 10 insertions(+), 2 deletions(-)
drivers/scsi/scsi_sysfs.c +2 -1
@@ -1300,7 +1300,8 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)device_enable_async_suspend (&sdev->sdev_gendev);scsi_autopm_get_target (starget);pm_runtime_set_active (&sdev->sdev_gendev); -pm_runtime_forbid (&sdev->sdev_gendev); +if (!sdev->rpm_autosuspend_on) +pm_runtime_forbid (&sdev->sdev_gendev);pm_runtime_enable (&sdev->sdev_gendev);scsi_autopm_put_target (starget);
drivers/scsi/sd.c +4 -0
@@ -3371,6 +3371,10 @@ static int sd_probe(struct device *dev) }blk_pm_runtime_init (sdp->request_queue, dev); +if (sdp->rpm_autosuspend_on) { +pm_runtime_set_autosuspend_delay (dev, + sdp->host->hostt->rpm_autosuspend_delay); + }device_add_disk (dev, gd,NULL );if (sdkp->capacity)sd_dif_config_host (sdkp);
include/scsi/scsi_device.h +1 -1
@@ -199,7 +199,7 @@ struct scsi_device { unsigned broken_fua:1; /* Don't set FUA bit */ unsigned lun_in_cdb:1; /* Store LUN bits in CDB[1] */ unsigned unmap_limit_for_ws:1; /* Use the UNMAP limit for WRITE SAME */ - + unsigned rpm_autosuspend_on:1; /* Runtime autosuspend */atomic_t disk_events_disable_depth;/* disable depth for disk events */ DECLARE_BITMAP (supported_events,SDEV_EVT_MAXBITS );/* supported events */
include/scsi/scsi_host.h +3 -0
@@ -474,6 +474,9 @@ struct scsi_host_template {*/ unsigned int cmd_size;struct scsi_host_cmd_pool *cmd_pool; + +/* Delay for runtime autosuspend */ +int rpm_autosuspend_delay; };/*
Signature · 1 line
2.18.0
include/scsi/scsi_device.h struct scsi_device { · line 203
Quoted 11 lines · Stanley Chu
include/scsi/scsi_device.h +1
-1@@ -199,7 +199,7 @@ struct scsi_device { unsigned broken_fua:1; /* Don't set FUA bit */ unsigned lun_in_cdb:1; /* Store LUN bits in CDB[1] */ unsigned unmap_limit_for_ws:1; /* Use the UNMAP limit for WRITE SAME */ - + unsigned rpm_autosuspend_on:1; /* Runtime autosuspend */atomic_t disk_events_disable_depth;/* disable depth for disk events */
The "_on" part in the variable name "rpm_autosuspend_on" is probably
redundant and the comment could have been more elaborate. Anyway:
Hi Bart,
Quoted 5 lines
include/scsi/scsi_device.h struct scsi_device { · line 203
Quoted 3 lines
include/scsi/scsi_device.h +1
-1- + unsigned rpm_autosuspend_on:1; /* Runtime autosuspend */atomic_t disk_events_disable_depth;/* disable depth for disk events */ The "
_on" part in the variable name "rpm_autosuspend_on" is probably
redundant and the comment could have been more elaborate. Anyway:
OK! Thanks for suggestions. Will fix both in next version.
Quoted 2 lines
Reviewed-by Bart Van Assche <[email protected]>
Thanks,
Stanley
PATCH v3 2/3 scsi: ufs: override auto suspend tunables for ufs
In reply to Stanley ChuRework from previous work by:
Sujit Reddy Thumma <[email protected]>
Override auto suspend tunables for UFS device LUNs during initialization so as to efficiently manage background operations and the power consumption.
--- drivers/scsi/ufs/ufshcd.c | 9 +++++++++ drivers/scsi/ufs/ufshcd.h | 10 ++++++++++ 2 files changed, 19 insertions(+)
drivers/scsi/ufs/ufshcd.c +9 -0
@@ -88,6 +88,9 @@/* Interrupt aggregation default timeout, unit: 40us */ #define INT_AGGR_DEF_TO 0x02 +/* default delay of autosuspend: 2000 ms */ +#define RPM_AUTOSUSPEND_DELAY_MS 2000 +#define ufshcd_toggle_vreg (_dev, _vreg, _on) \ ({ \ int _ret; \
@@ -4612,9 +4615,14 @@ static int ufshcd_change_queue_depth(struct scsi_device *sdev, int depth)*/ static int ufshcd_slave_configure (struct scsi_device *sdev) { +struct ufs_hba *hba =shost_priv (sdev->host);struct request_queue *q = sdev->request_queue;blk_queue_update_dma_pad (q,PRDT_DATA_BYTE_COUNT_PAD -1 ); + +if (ufshcd_is_rpm_autosuspend_allowed (hba)) + sdev->rpm_autosuspend_on =1 ; +return 0 ; }
@@ -7041,6 +7049,7 @@ static struct scsi_host_template ufshcd_driver_template = { .track_queue_depth = 1, .sdev_groups = ufshcd_driver_groups, .dma_boundary = PAGE_SIZE - 1, + .rpm_autosuspend_delay = RPM_AUTOSUSPEND_DELAY_MS, }; static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg,
drivers/scsi/ufs/ufshcd.h +10 -0
@@ -714,6 +714,12 @@ struct ufs_hba {* the performance of ongoing read/write operations. */ #define UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND (1 << 5) +/* +* This capability allows host controller driver to automatically +* enable runtime power management by itself instead of waiting +* for userspace to control the power management. +*/ +#define UFSHCD_CAP_RPM_AUTOSUSPEND (1 << 6)struct devfreq *devfreq;struct ufs_clk_scaling clk_scaling;
@@ -747,6 +753,10 @@ static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba) {return hba->caps &UFSHCD_CAP_AUTO_BKOPS_SUSPEND ; } +static inline bool ufshcd_is_rpm_autosuspend_allowed (struct ufs_hba *hba) +{ +return hba->caps &UFSHCD_CAP_RPM_AUTOSUSPEND ; +}static inline bool ufshcd_is_intr_aggr_allowed (struct ufs_hba *hba) {
Signature · 1 line
2.18.0
RE: [EXT] [PATCH v3 2/3] scsi: ufs: override auto suspend tunables for ufs
Quoted 3 lines
Signed-off-by Stanley Chu <[email protected]>Reviewed-by Avri Altman <[email protected]>
PATCH v3 3/3 scsi: ufs-mediatek: enable auto suspend capability
In reply to Stanley ChuEnable auto suspend capability in MediaTek UFS driver.
--- drivers/scsi/ufs/ufs-mediatek.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/scsi/ufs/ufs-mediatek.c +3 -0
@@ -147,6 +147,9 @@ static int ufs_mtk_init(struct ufs_hba *hba)if (err) goto out_variant_clear; +/* Enable runtime autosuspend */ + hba->caps |=UFSHCD_CAP_RPM_AUTOSUSPEND ; +/* * ufshcd_vops_init() is invoked after * ufshcd_setup_clock(true) in ufshcd_hba_init() thus
Signature · 1 line
2.18.0