Skip to contentSkip to conversation

powerpc: expose secure variables to the kernel and userspace

PATCH Superseded Nayna Jain 2 participants 7 messages Oct 1, 2019 – Oct 15, 2019

Subsystems (7)

v4 of 9 Superseded Latest is v9 →

lore
Share & tools
lore

Nayna Jain

author
#0 lore raw

v4 cover powerpc: expose secure variables to the kernel and userspace

In order to verify the OS kernel on PowerNV systems, secure boot requires X.509 certificates trusted by the platform. These are stored in secure variables controlled by OPAL, called OPAL secure variables. In order to enable users to manage the keys, the secure variables need to be exposed to userspace.

OPAL provides the runtime services for the kernel to be able to access the secure variables[1]. This patchset defines the kernel interface for the OPAL APIs. These APIs are used by the hooks, which load these variables to the keyring and expose them to the userspace for reading/writing.

The previous version[2] of the patchset added support only for the sysfs interface. This patch adds two more patches that involves loading of the firmware trusted keys to the kernel keyring. This patchset is dependent on the base CONFIG PPC_SECURE_BOOT added by ima arch specific patches for POWER[3]

Overall, this patchset adds the following support:

* expose secure variables to the kernel via OPAL Runtime API interface
* expose secure variables to the userspace via kernel sysfs interface
* load kernel verification and revocation keys to .platform and .blacklist keyring respectively.

The secure variables can be read/written using simple linux utilities cat/hexdump.

For example:
Path to the secure variables is:
/sys/firmware/secvar/vars

Each secure variable is listed as directory.

$ ls -l
total 0
drwxr-xr-x. 2 root root 0 Aug 20 21:20 db
drwxr-xr-x. 2 root root 0 Aug 20 21:20 KEK
drwxr-xr-x. 2 root root 0 Aug 20 21:20 PK

The attributes of each of the secure variables are(for example: PK):
[db]$ ls -l
total 0

-r--r--r--. 1 root root     0 Oct  1 15:10 data
-r--r--r--. 1 root root 65536 Oct  1 15:10 size
--w-------. 1 root root     0 Oct  1 15:12 update

The "data" is used to read the existing variable value using hexdump. The data is stored in ESL format.
The "update" is used to write a new value using cat. The update is to be submitted as AUTH file.

[1] Depends on skiboot OPAL API changes which removes metadata from the API. https://lists.ozlabs.org/pipermail/skiboot/2019-September/015203.html.
[2] https://lkml.org/lkml/2019/6/13/1644
[3] https://lkml.org/lkml/2019/9/27/407

Changelog:
v4:
* rebased to v5.4-rc1
* uses __BIN_ATTR_WO macro to create binary attribute as suggested by Greg
* removed email id from the file header
* renamed argument keysize to keybufsize in get_next() function
* updated default binary file sizes to 0, as firmware handles checking against the maximum size
* fixed minor formatting issues in Patch 4/4
* added Greg's and Mimi's Reviewed-by and Ack-by

v3:
* includes Greg's feedbacks:
* fixes in Patch 2/4
* updates the Documentation.
* fixes code feedbacks
* adds SYSFS Kconfig dependency for SECVAR_SYSFS
* fixes mixed tabs and spaces
* removes "name" attribute for each of the variable name based directories
* fixes using __ATTR_RO() and __BIN_ATTR_RO() and statics and const
* fixes the racing issue by using kobj_type default groups. Also, fixes the kobject leakage.
* removes extra print messages
* updates patch description for Patch 3/4
* removes file name from Patch 4/4 file header comment and removed def_bool y from the LOAD_PPC_KEYS Kconfig

* includes Oliver's feedbacks:
* fixes Patch 1/2
* moves OPAL API wrappers after opal_nx_proc_init(), fixed the naming, types and removed extern.
* fixes spaces
* renames get_variable() to get(), get_next_variable() to get_next() and set_variable() to set()
* removed get_secvar_ops() and defined secvar_ops as global
* fixes consts and statics
* removes generic secvar_init() and defined platform specific opal_secar_init()
* updates opal_secvar_supported() to check for secvar support even before checking the OPAL APIs support and also fixed the error codes.
* addes function that converts OPAL return codes to linux errno
* moves secvar check support in the opal_secvar_init() and defined its prototype in opal.h
* fixes Patch 2/2
* fixes static/const
* defines macro for max name size
* replaces OPAL error codes with linux errno and also updated error handling
* moves secvar support check before creating sysfs kobjects in secvar_sysfs_init()
* fixes spaces

v2:
* removes complete efi-sms from the sysfs implementation and is simplified
* includes Greg's and Oliver's feedbacks:
* adds sysfs documentation
* moves sysfs code to arch/powerpc
* other code related feedbacks.
* adds two new patches to load keys to .platform and .blacklist keyring. These patches are added to this series as they are also dependent on OPAL APIs.

Nayna Jain (4):
powerpc/powernv: Add OPAL API interface to access secure variable
powerpc: expose secure variables to userspace via sysfs x86/efi: move common keyring handler functions to new file
powerpc: load firmware trusted keys/hashes into kernel keyring

 Documentation/ABI/testing/sysfs-secvar        |  37 ++++
 arch/powerpc/Kconfig                          |  10 +
 arch/powerpc/include/asm/opal-api.h           |   5 +-
 arch/powerpc/include/asm/opal.h               |   8 +
 arch/powerpc/include/asm/powernv.h            |   2 +
 arch/powerpc/include/asm/secvar.h             |  35 ++++
 arch/powerpc/kernel/Makefile                  |   3 +-
 arch/powerpc/kernel/secvar-ops.c              |  19 ++
 arch/powerpc/kernel/secvar-sysfs.c            | 198 ++++++++++++++++++
 arch/powerpc/platforms/powernv/Kconfig        |   6 +
 arch/powerpc/platforms/powernv/Makefile       |   1 +
 arch/powerpc/platforms/powernv/opal-call.c    |   3 +
 arch/powerpc/platforms/powernv/opal-secvar.c  | 137 ++++++++++++
 arch/powerpc/platforms/powernv/opal.c         |   5 +
 security/integrity/Kconfig                    |   8 +
 security/integrity/Makefile                   |   6 +-
 .../platform_certs/keyring_handler.c          |  80 +++++++
 .../platform_certs/keyring_handler.h          |  32 +++
 .../integrity/platform_certs/load_powerpc.c   |  86 ++++++++
 security/integrity/platform_certs/load_uefi.c |  67 +-----
 20 files changed, 679 insertions(+), 69 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-secvar
 create mode 100644 arch/powerpc/include/asm/secvar.h
 create mode 100644 arch/powerpc/kernel/secvar-ops.c
 create mode 100644 arch/powerpc/kernel/secvar-sysfs.c
 create mode 100644 arch/powerpc/platforms/powernv/opal-secvar.c
 create mode 100644 security/integrity/platform_certs/keyring_handler.c
 create mode 100644 security/integrity/platform_certs/keyring_handler.h
 create mode 100644 security/integrity/platform_certs/load_powerpc.c
Signature · 1 line
2.20.1
author
#1 lore raw

PATCH v4 1/4 powerpc/powernv: Add OPAL API interface to access secure variable

The X.509 certificates trusted by the platform and required to secure boot the OS kernel are wrapped in secure variables, which are controlled by OPAL.

This patch adds firmware/kernel interface to read and write OPAL secure variables based on the unique key.

This support can be enabled using CONFIG_OPAL_SECVAR.

---
 arch/powerpc/include/asm/opal-api.h          |   5 +-
 arch/powerpc/include/asm/opal.h              |   8 ++
 arch/powerpc/include/asm/powernv.h           |   2 +
 arch/powerpc/include/asm/secvar.h            |  35 +++++
 arch/powerpc/kernel/Makefile                 |   2 +-
 arch/powerpc/kernel/secvar-ops.c             |  19 +++
 arch/powerpc/platforms/powernv/Kconfig       |   6 +
 arch/powerpc/platforms/powernv/Makefile      |   1 +
 arch/powerpc/platforms/powernv/opal-call.c   |   3 +
 arch/powerpc/platforms/powernv/opal-secvar.c | 137 +++++++++++++++++++
 arch/powerpc/platforms/powernv/opal.c        |   5 +
 11 files changed, 221 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/include/asm/secvar.h
 create mode 100644 arch/powerpc/kernel/secvar-ops.c
 create mode 100644 arch/powerpc/platforms/powernv/opal-secvar.c
arch/powerpc/include/asm/opal-api.h +4 -1
index 378e3997845a..c1f25a760eb1 100644
@@ -211,7 +211,10 @@
 #define OPAL_MPIPL_UPDATE			173
 #define OPAL_MPIPL_REGISTER_TAG			174
 #define OPAL_MPIPL_QUERY_TAG			175
-#define OPAL_LAST				175
+#define OPAL_SECVAR_GET				176
+#define OPAL_SECVAR_GET_NEXT			177
+#define OPAL_SECVAR_ENQUEUE_UPDATE		178
+#define OPAL_LAST				178
 
 #define QUIESCE_HOLD			1 /* Spin all calls at entry */
 #define QUIESCE_REJECT			2 /* Fail all calls with OPAL_BUSY */
arch/powerpc/include/asm/opal.h +8 -0
index a0cf8fba4d12..03392dc3f5e2 100644
@@ -298,6 +298,13 @@ int opal_sensor_group_clear(u32 group_hndl, int token);
 int opal_sensor_group_enable(u32 group_hndl, int token, bool enable);
 int opal_nx_coproc_init(uint32_t chip_id, uint32_t ct);
 
+int opal_secvar_get(const char *key, uint64_t key_len, u8 *data,
+		    uint64_t *data_size);
+int opal_secvar_get_next(const char *key, uint64_t *key_len,
+			 uint64_t key_buf_size);
+int opal_secvar_enqueue_update(const char *key, uint64_t key_len, u8 *data,
+			       uint64_t data_size);
+
 s64 opal_mpipl_update(enum opal_mpipl_ops op, u64 src, u64 dest, u64 size);
 s64 opal_mpipl_register_tag(enum opal_mpipl_tags tag, u64 addr);
 s64 opal_mpipl_query_tag(enum opal_mpipl_tags tag, u64 *addr);
@@ -392,6 +399,7 @@ void opal_wake_poller(void);
 void opal_powercap_init(void);
 void opal_psr_init(void);
 void opal_sensor_groups_init(void);
+void opal_secvar_init(void);
 
 #endif /* __ASSEMBLY__ */
 
arch/powerpc/include/asm/powernv.h +2 -0
index e1a858718716..cff980a85dd2 100644
@@ -12,10 +12,12 @@ extern void powernv_set_nmmu_ptcr(unsigned long ptcr);
 void pnv_program_cpu_hotplug_lpcr(unsigned int cpu, u64 lpcr_val);
 
 void pnv_tm_init(void);
+
 #else
 static inline void powernv_set_nmmu_ptcr(unsigned long ptcr) { }
 
 static inline void pnv_tm_init(void) { }
+
 #endif
 
 #endif /* _ASM_POWERNV_H */
arch/powerpc/include/asm/secvar.h new file +35 -0
new file mode 100644
index 000000000000..4cc35b58b986
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 IBM Corporation
+ * Author: Nayna Jain
+ *
+ * PowerPC secure variable operations.
+ */
+#ifndef SECVAR_OPS_H
+#define SECVAR_OPS_H
+
+#include <linux/types.h>
+#include <linux/errno.h>
+
+extern const struct secvar_operations *secvar_ops;
+
+struct secvar_operations {
+	int (*get)(const char *key, uint64_t key_len, u8 *data,
+		   uint64_t *data_size);
+	int (*get_next)(const char *key, uint64_t *key_len,
+			uint64_t keybufsize);
+	int (*set)(const char *key, uint64_t key_len, u8 *data,
+		   uint64_t data_size);
+};
+
+#ifdef CONFIG_PPC_SECURE_BOOT
+
+extern void set_secvar_ops(const struct secvar_operations *ops);
+
+#else
+
+static inline void set_secvar_ops(const struct secvar_operations *ops) { }
+
+#endif
+
+#endif
arch/powerpc/kernel/Makefile +1 -1
index e8eb2955b7d5..3cf26427334f 100644
@@ -161,7 +161,7 @@ ifneq ($(CONFIG_PPC_POWERNV)$(CONFIG_PPC_SVM),)
 obj-y				+= ucall.o
 endif
 
-obj-$(CONFIG_PPC_SECURE_BOOT)	+= secure_boot.o ima_arch.o
+obj-$(CONFIG_PPC_SECURE_BOOT)	+= secure_boot.o ima_arch.o secvar-ops.o
 
 # Disable GCOV, KCOV & sanitizers in odd or sensitive code
 GCOV_PROFILE_prom_init.o := n
arch/powerpc/kernel/secvar-ops.c new file +19 -0
new file mode 100644
index 000000000000..4331a5b66ec0
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 IBM Corporation
+ * Author: Nayna Jain
+ *
+ * This file initializes secvar operations for PowerPC Secureboot
+ */
+
+#include <stddef.h>
+#include <asm/secvar.h>
+
+const struct secvar_operations *secvar_ops;
+
+void set_secvar_ops(const struct secvar_operations *ops)
+{
+	if (!ops)
+		secvar_ops = NULL;
+	secvar_ops = ops;
+}
arch/powerpc/platforms/powernv/Kconfig +6 -0
index 938803eab0ad..a1c7c8e2e683 100644
@@ -50,3 +50,9 @@ config PPC_VAS
 config SCOM_DEBUGFS
 	bool "Expose SCOM controllers via debugfs"
 	depends on DEBUG_FS
+
+config OPAL_SECVAR
+	bool "OPAL Secure Variables"
+	depends on PPC_POWERNV
+	help
+	  This enables the kernel to access OPAL secure variables.
arch/powerpc/platforms/powernv/Makefile +1 -0
index a3ac9646119d..0ae688bde9b7 100644
@@ -20,3 +20,4 @@ obj-$(CONFIG_PPC_MEMTRACE)	+= memtrace.o
 obj-$(CONFIG_PPC_VAS)	+= vas.o vas-window.o vas-debug.o
 obj-$(CONFIG_OCXL_BASE)	+= ocxl.o
 obj-$(CONFIG_SCOM_DEBUGFS) += opal-xscom.o
+obj-$(CONFIG_OPAL_SECVAR) += opal-secvar.o
arch/powerpc/platforms/powernv/opal-call.c +3 -0
index a2aa5e433ac8..5cd0f52d258f 100644
@@ -290,3 +290,6 @@ OPAL_CALL(opal_nx_coproc_init,			OPAL_NX_COPROC_INIT);
 OPAL_CALL(opal_mpipl_update,			OPAL_MPIPL_UPDATE);
 OPAL_CALL(opal_mpipl_register_tag,		OPAL_MPIPL_REGISTER_TAG);
 OPAL_CALL(opal_mpipl_query_tag,			OPAL_MPIPL_QUERY_TAG);
+OPAL_CALL(opal_secvar_get,			OPAL_SECVAR_GET);
+OPAL_CALL(opal_secvar_get_next,			OPAL_SECVAR_GET_NEXT);
+OPAL_CALL(opal_secvar_enqueue_update,		OPAL_SECVAR_ENQUEUE_UPDATE);
arch/powerpc/platforms/powernv/opal-secvar.c new file +137 -0

137 lines not on this page · raw message

arch/powerpc/platforms/powernv/opal.c +5 -0
index 38e90270280b..8e654d3735c1 100644
@@ -32,6 +32,8 @@
 #include <asm/mce.h>
 #include <asm/imc-pmu.h>
 #include <asm/bug.h>
+#include <asm/secvar.h>
+#include <asm/secure_boot.h>
 
 #include "powernv.h"
 
@@ -1002,6 +1004,9 @@ static int __init opal_init(void)
 	/* Initialise OPAL Power control interface */
 	opal_power_control_init();
 
+	/* Initialize OPAL secure variables */
+	opal_secvar_init();
+
 	return 0;
 }
 machine_subsys_initcall(powernv, opal_init);
Signature · 1 line
2.20.1
#2 lore raw

Re: [PATCH v4 1/4] powerpc/powernv: Add OPAL API interface to access secure variable

Quoted 157 lines · Nayna Jain

The X.509 certificates trusted by the platform and required to secure boot the OS kernel are wrapped in secure variables, which are controlled by OPAL.

This patch adds firmware/kernel interface to read and write OPAL secure variables based on the unique key.

This support can be enabled using CONFIG_OPAL_SECVAR.

---
 arch/powerpc/include/asm/opal-api.h          |   5 +-
 arch/powerpc/include/asm/opal.h              |   8 ++
 arch/powerpc/include/asm/powernv.h           |   2 +
 arch/powerpc/include/asm/secvar.h            |  35 +++++
 arch/powerpc/kernel/Makefile                 |   2 +-
 arch/powerpc/kernel/secvar-ops.c             |  19 +++
 arch/powerpc/platforms/powernv/Kconfig       |   6 +
 arch/powerpc/platforms/powernv/Makefile      |   1 +
 arch/powerpc/platforms/powernv/opal-call.c   |   3 +
 arch/powerpc/platforms/powernv/opal-secvar.c | 137 +++++++++++++++++++
 arch/powerpc/platforms/powernv/opal.c        |   5 +
 11 files changed, 221 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/include/asm/secvar.h
 create mode 100644 arch/powerpc/kernel/secvar-ops.c
 create mode 100644 arch/powerpc/platforms/powernv/opal-secvar.c
arch/powerpc/include/asm/opal-api.h +4 -1
index 378e3997845a..c1f25a760eb1 100644
@@ -211,7 +211,10 @@
 #define OPAL_MPIPL_UPDATE			173
 #define OPAL_MPIPL_REGISTER_TAG			174
 #define OPAL_MPIPL_QUERY_TAG			175
-#define OPAL_LAST				175
+#define OPAL_SECVAR_GET				176
+#define OPAL_SECVAR_GET_NEXT			177
+#define OPAL_SECVAR_ENQUEUE_UPDATE		178
+#define OPAL_LAST				178
 
 #define QUIESCE_HOLD			1 /* Spin all calls at entry */
 #define QUIESCE_REJECT			2 /* Fail all calls with OPAL_BUSY */
arch/powerpc/include/asm/opal.h +8 -0
index a0cf8fba4d12..03392dc3f5e2 100644
@@ -298,6 +298,13 @@ int opal_sensor_group_clear(u32 group_hndl, int token);
 int opal_sensor_group_enable(u32 group_hndl, int token, bool enable);
 int opal_nx_coproc_init(uint32_t chip_id, uint32_t ct);
 
+int opal_secvar_get(const char *key, uint64_t key_len, u8 *data,
+		    uint64_t *data_size);
+int opal_secvar_get_next(const char *key, uint64_t *key_len,
+			 uint64_t key_buf_size);
+int opal_secvar_enqueue_update(const char *key, uint64_t key_len, u8 *data,
+			       uint64_t data_size);
+
 s64 opal_mpipl_update(enum opal_mpipl_ops op, u64 src, u64 dest, u64 size);
 s64 opal_mpipl_register_tag(enum opal_mpipl_tags tag, u64 addr);
 s64 opal_mpipl_query_tag(enum opal_mpipl_tags tag, u64 *addr);
@@ -392,6 +399,7 @@ void opal_wake_poller(void);
 void opal_powercap_init(void);
 void opal_psr_init(void);
 void opal_sensor_groups_init(void);
+void opal_secvar_init(void);
 
 #endif /* __ASSEMBLY__ */
 
arch/powerpc/include/asm/powernv.h +2 -0
index e1a858718716..cff980a85dd2 100644
@@ -12,10 +12,12 @@ extern void powernv_set_nmmu_ptcr(unsigned long ptcr);
 void pnv_program_cpu_hotplug_lpcr(unsigned int cpu, u64 lpcr_val);
 
 void pnv_tm_init(void);
+
 #else
 static inline void powernv_set_nmmu_ptcr(unsigned long ptcr) { }
 
 static inline void pnv_tm_init(void) { }
+
 #endif
 
 #endif /* _ASM_POWERNV_H */
arch/powerpc/include/asm/secvar.h new file +35 -0
new file mode 100644
index 000000000000..4cc35b58b986
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 IBM Corporation
+ * Author: Nayna Jain
+ *
+ * PowerPC secure variable operations.
+ */
+#ifndef SECVAR_OPS_H
+#define SECVAR_OPS_H
+
+#include <linux/types.h>
+#include <linux/errno.h>
+
+extern const struct secvar_operations *secvar_ops;
+
+struct secvar_operations {
+	int (*get)(const char *key, uint64_t key_len, u8 *data,
+		   uint64_t *data_size);
+	int (*get_next)(const char *key, uint64_t *key_len,
+			uint64_t keybufsize);
+	int (*set)(const char *key, uint64_t key_len, u8 *data,
+		   uint64_t data_size);
+};
+
+#ifdef CONFIG_PPC_SECURE_BOOT
+
+extern void set_secvar_ops(const struct secvar_operations *ops);
+
+#else
+
+static inline void set_secvar_ops(const struct secvar_operations *ops) { }
+
+#endif
+
+#endif
arch/powerpc/kernel/Makefile +1 -1
index e8eb2955b7d5..3cf26427334f 100644
@@ -161,7 +161,7 @@ ifneq ($(CONFIG_PPC_POWERNV)$(CONFIG_PPC_SVM),)
 obj-y				+= ucall.o
 endif
 
-obj-$(CONFIG_PPC_SECURE_BOOT)	+= secure_boot.o ima_arch.o
+obj-$(CONFIG_PPC_SECURE_BOOT)	+= secure_boot.o ima_arch.o secvar-ops.o
 
 # Disable GCOV, KCOV & sanitizers in odd or sensitive code
 GCOV_PROFILE_prom_init.o := n
arch/powerpc/kernel/secvar-ops.c new file +10 -0
new file mode 100644
index 000000000000..4331a5b66ec0
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 IBM Corporation
+ * Author: Nayna Jain
+ *
+ * This file initializes secvar operations for PowerPC Secureboot
+ */
+
+#include <stddef.h>
+#include <asm/secvar.h>

arch/powerpc/kernel/secvar-ops.c line 19

Quoted 10 lines
arch/powerpc/kernel/secvar-ops.c new file +9 -0
+
+const struct secvar_operations *secvar_ops;
+
 
+void set_secvar_ops(const struct secvar_operations *ops)
+{
+	if (!ops)
+		secvar_ops = NULL;
+	secvar_ops = ops;
+}

Seems a little redundant.

Quoted 120 lines
arch/powerpc/platforms/powernv/Kconfig +6 -0
index 938803eab0ad..a1c7c8e2e683 100644
@@ -50,3 +50,9 @@ config PPC_VAS
 config SCOM_DEBUGFS
 	bool "Expose SCOM controllers via debugfs"
 	depends on DEBUG_FS
+
+config OPAL_SECVAR
+	bool "OPAL Secure Variables"
+	depends on PPC_POWERNV
+	help
+	  This enables the kernel to access OPAL secure variables.
arch/powerpc/platforms/powernv/Makefile +1 -0
index a3ac9646119d..0ae688bde9b7 100644
@@ -20,3 +20,4 @@ obj-$(CONFIG_PPC_MEMTRACE)	+= memtrace.o
 obj-$(CONFIG_PPC_VAS)	+= vas.o vas-window.o vas-debug.o
 obj-$(CONFIG_OCXL_BASE)	+= ocxl.o
 obj-$(CONFIG_SCOM_DEBUGFS) += opal-xscom.o
+obj-$(CONFIG_OPAL_SECVAR) += opal-secvar.o
arch/powerpc/platforms/powernv/opal-call.c +3 -0
index a2aa5e433ac8..5cd0f52d258f 100644
@@ -290,3 +290,6 @@ OPAL_CALL(opal_nx_coproc_init,			OPAL_NX_COPROC_INIT);
 OPAL_CALL(opal_mpipl_update,			OPAL_MPIPL_UPDATE);
 OPAL_CALL(opal_mpipl_register_tag,		OPAL_MPIPL_REGISTER_TAG);
 OPAL_CALL(opal_mpipl_query_tag,			OPAL_MPIPL_QUERY_TAG);
+OPAL_CALL(opal_secvar_get,			OPAL_SECVAR_GET);
+OPAL_CALL(opal_secvar_get_next,			OPAL_SECVAR_GET_NEXT);
+OPAL_CALL(opal_secvar_enqueue_update,		OPAL_SECVAR_ENQUEUE_UPDATE);
arch/powerpc/platforms/powernv/opal-secvar.c new file +80 -0
new file mode 100644
index 000000000000..ad5c6b8019dd
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PowerNV code for secure variables
+ *
+ * Copyright (C) 2019 IBM Corporation
+ * Author: Claudio Carvalho
+ *         Nayna Jain
+ *
+ * APIs to access secure variables managed by OPAL.
+ */
+
+#define pr_fmt(fmt) "secvar: "fmt
+
+#include <linux/types.h>
+#include <asm/opal.h>
+#include <asm/secvar.h>
+#include <asm/secure_boot.h>
+
+static int opal_status_to_err(int rc)
+{
+	int err;
+
+	switch (rc) {
+	case OPAL_SUCCESS:
+		err = 0;
+		break;
+	case OPAL_UNSUPPORTED:
+		err = -ENXIO;
+		break;
+	case OPAL_PARAMETER:
+		err = -EINVAL;
+		break;
+	case OPAL_RESOURCE:
+		err = -ENOSPC;
+		break;
+	case OPAL_HARDWARE:
+		err = -EIO;
+		break;
+	case OPAL_NO_MEM:
+		err = -ENOMEM;
+		break;
+	case OPAL_EMPTY:
+		err = -ENOENT;
+		break;
+	case OPAL_PARTIAL:
+		err = -EFBIG;
+		break;
+	default:
+		err = -EINVAL;
+	}
+
+	return err;
+}
+
+static bool is_opal_secvar_supported(void)
+{
+	static bool opal_secvar_supported;
+	static bool initialized;
+
+	if (initialized)
+		return opal_secvar_supported;
+
+	if (!is_powerpc_os_sb_supported()) {
+		opal_secvar_supported = false;
+		goto out;
+	}
+
+	if (!opal_check_token(OPAL_SECVAR_GET)
+			|| !opal_check_token(OPAL_SECVAR_GET_NEXT)
+			|| !opal_check_token(OPAL_SECVAR_ENQUEUE_UPDATE)) {
+		pr_err("OPAL doesn't support secure variables\n");
+		opal_secvar_supported = false;
+	} else {
+		opal_secvar_supported = true;
+	}
+
+out:
+	initialized = true;
+
+	return opal_secvar_supported;

arch/powerpc/platforms/powernv/opal-secvar.c line 89

Quoted 10 lines
arch/powerpc/platforms/powernv/opal-secvar.c new file +9 -0
+}
+
 
+static int opal_get_variable(const char *key, uint64_t ksize,
+			     u8 *data, uint64_t *dsize)
+{
+	int rc;
+
+	if (dsize)
+		*dsize = cpu_to_be64(*dsize);

Is passing a NULL size pointer ever a valid thing to do? I'd check with Eric first, but IIRC OPAL will just reject that with OPAL_PARAMETER.

Quoted 6 lines
arch/powerpc/platforms/powernv/opal-secvar.c new file +6 -0
+
+	rc = opal_secvar_get(key, ksize, data, dsize);
+
+	if (dsize)
+		*dsize = be64_to_cpu(*dsize);
+

arch/powerpc/platforms/powernv/opal-secvar.c

Quoted 10 lines
arch/powerpc/platforms/powernv/opal-secvar.c new file +10 -0
+	return opal_status_to_err(rc);
+}
+
+static int opal_get_next_variable(const char *key, uint64_t *keylen,
+				  uint64_t keybufsize)
+{
+	int rc;
+
+	if (keylen)
+		*keylen = cpu_to_be64(*keylen);same question

same here

arch/powerpc/platforms/powernv/opal-secvar.c line 113

Quoted 8 lines
arch/powerpc/platforms/powernv/opal-secvar.c new file +8 -0
+
+	rc = opal_secvar_get_next(key, keylen, keybufsize);
+
+	if (keylen)
+		*keylen = be64_to_cpu(*keylen);
+
+	return opal_status_to_err(rc);
+}

*snip*

arch/powerpc/platforms/powernv/opal-secvar.c line 134

Quoted 4 lines
arch/powerpc/platforms/powernv/opal-secvar.c new file +4 -0
+void opal_secvar_init(void)
+{
+	if (!is_opal_secvar_supported())
+		set_secvar_ops(NULL);

You might as well fold is_opal_secvar_supported() into this function since its the only caller.

arch/powerpc/platforms/powernv/opal-secvar.c line 137

Quoted 3 lines
arch/powerpc/platforms/powernv/opal-secvar.c new file +3 -0
+
+	set_secvar_ops(&opal_secvar_ops);
+}

Doesn't this unconditionally set the secvar ops to &opal_secvar_ops?

Quoted 23 lines
arch/powerpc/platforms/powernv/opal.c +5 -0
index 38e90270280b..8e654d3735c1 100644
@@ -32,6 +32,8 @@
 #include <asm/mce.h>
 #include <asm/imc-pmu.h>
 #include <asm/bug.h>
+#include <asm/secvar.h>
+#include <asm/secure_boot.h>
 
 #include "powernv.h"
 
@@ -1002,6 +1004,9 @@ static int __init opal_init(void)
 	/* Initialise OPAL Power control interface */
 	opal_power_control_init();
 
+	/* Initialize OPAL secure variables */
+	opal_secvar_init();
+
 	return 0;
 }
 machine_subsys_initcall(powernv, opal_init);
author
#3 lore raw

PATCH v4 2/4 powerpc: expose secure variables to userspace via sysfs

In reply to Nayna Jain

PowerNV secure variables, which store the keys used for OS kernel verification, are managed by the firmware. These secure variables need to be accessed by the userspace for addition/deletion of the certificates.

This patch adds the sysfs interface to expose secure variables for PowerNV secureboot. The users shall use this interface for manipulating the keys stored in the secure variables.

---
 Documentation/ABI/testing/sysfs-secvar |  37 +++++
 arch/powerpc/Kconfig                   |  10 ++
 arch/powerpc/kernel/Makefile           |   1 +
 arch/powerpc/kernel/secvar-sysfs.c     | 198 +++++++++++++++++++++++++
 4 files changed, 246 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-secvar
 create mode 100644 arch/powerpc/kernel/secvar-sysfs.c
Documentation/ABI/testing/sysfs-secvar new file +37 -0
new file mode 100644
index 000000000000..815bd8ec4d5e
@@ -0,0 +1,37 @@
+What:		/sys/firmware/secvar
+Date:		August 2019
+Contact:	Nayna Jain <[email protected]>
+Description:	This directory is created if the POWER firmware supports OS
+		secureboot, thereby secure variables. It exposes interface
+		for reading/writing the secure variables
+
+What:		/sys/firmware/secvar/vars
+Date:		August 2019
+Contact:	Nayna Jain <[email protected]>
+Description:	This directory lists all the secure variables that are supported
+		by the firmware.
+
+What:		/sys/firmware/secvar/vars/<variable name>
+Date:		August 2019
+Contact:	Nayna Jain <[email protected]>
+Description:	Each secure variable is represented as a directory named as
+		<variable_name>. The variable name is unique and is in ASCII
+		representation. The data and size can be determined by reading
+		their respective attribute files.
+
+What:		/sys/firmware/secvar/vars/<variable_name>/size
+Date:		August 2019
+Contact:	Nayna Jain <[email protected]>
+Description:	An integer representation of the size of the content of the
+		variable. In other words, it represents the size of the data.
+
+What:		/sys/firmware/secvar/vars/<variable_name>/data
+Date:		August 2019
+Contact:	Nayna Jain <[email protected]>
+Description:	A read-only file containing the value of the variable
+
+What:		/sys/firmware/secvar/vars/<variable_name>/update
+Date:		August 2019
+Contact:	Nayna Jain <[email protected]>
+Description:	A write-only file that is used to submit the new value for the
+		variable.
arch/powerpc/Kconfig +10 -0
index deb19ec6ba3d..89084e4e5054 100644
@@ -946,6 +946,16 @@ config PPC_SECURE_BOOT
 	  to enable OS secure boot on systems that have firmware support for
 	  it. If in doubt say N.
 
+config SECVAR_SYSFS
+	tristate "Enable sysfs interface for POWER secure variables"
+	depends on PPC_SECURE_BOOT
+	depends on SYSFS
+	help
+	  POWER secure variables are managed and controlled by firmware.
+	  These variables are exposed to userspace via sysfs to enable
+	  read/write operations on these variables. Say Y if you have
+	  secure boot enabled and want to expose variables to userspace.
+
 endmenu
 
 config ISA_DMA_API
arch/powerpc/kernel/Makefile +1 -0
index 3cf26427334f..116a3a5c0557 100644
@@ -162,6 +162,7 @@ obj-y				+= ucall.o
 endif
 
 obj-$(CONFIG_PPC_SECURE_BOOT)	+= secure_boot.o ima_arch.o secvar-ops.o
+obj-$(CONFIG_SECVAR_SYSFS)	+= secvar-sysfs.o
 
 # Disable GCOV, KCOV & sanitizers in odd or sensitive code
 GCOV_PROFILE_prom_init.o := n
arch/powerpc/kernel/secvar-sysfs.c new file +198 -0

198 lines not on this page · raw message

Signature · 1 line
2.20.1
#4 lore raw

Re: [PATCH v4 2/4] powerpc: expose secure variables to userspace via sysfs

Quoted 52 lines · Nayna Jain

PowerNV secure variables, which store the keys used for OS kernel verification, are managed by the firmware. These secure variables need to be accessed by the userspace for addition/deletion of the certificates.

This patch adds the sysfs interface to expose secure variables for PowerNV secureboot. The users shall use this interface for manipulating the keys stored in the secure variables.

---
 Documentation/ABI/testing/sysfs-secvar |  37 +++++
 arch/powerpc/Kconfig                   |  10 ++
 arch/powerpc/kernel/Makefile           |   1 +
 arch/powerpc/kernel/secvar-sysfs.c     | 198 +++++++++++++++++++++++++
 4 files changed, 246 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-secvar
 create mode 100644 arch/powerpc/kernel/secvar-sysfs.c
Documentation/ABI/testing/sysfs-secvar new file +27 -0
new file mode 100644
index 000000000000..815bd8ec4d5e
@@ -0,0 +1,37 @@
+What:		/sys/firmware/secvar
+Date:		August 2019
+Contact:	Nayna Jain <[email protected]>
+Description:	This directory is created if the POWER firmware supports OS
+		secureboot, thereby secure variables. It exposes interface
+		for reading/writing the secure variables
+
+What:		/sys/firmware/secvar/vars
+Date:		August 2019
+Contact:	Nayna Jain <[email protected]>
+Description:	This directory lists all the secure variables that are supported
+		by the firmware.
+
+What:		/sys/firmware/secvar/vars/<variable name>
+Date:		August 2019
+Contact:	Nayna Jain <[email protected]>
+Description:	Each secure variable is represented as a directory named as
+		<variable_name>. The variable name is unique and is in ASCII
+		representation. The data and size can be determined by reading
+		their respective attribute files.
+
+What:		/sys/firmware/secvar/vars/<variable_name>/size
+Date:		August 2019
+Contact:	Nayna Jain <[email protected]>
+Description:	An integer representation of the size of the content of the
+		variable. In other words, it represents the size of the data.
+

Documentation/ABI/testing/sysfs-secvar line 37

Quoted 10 lines
Documentation/ABI/testing/sysfs-secvar new file +10 -0
+What:		/sys/firmware/secvar/vars/<variable_name>/data
+Date:		August 2019
+Contact:	Nayna Jain <[email protected]>
+Description:	A read-only file containing the value of the variable
+
+What:		/sys/firmware/secvar/vars/<variable_name>/update
+Date:		August 2019
+Contact:	Nayna Jain <[email protected]>
+Description:	A write-only file that is used to submit the new value for the
+		variable.

How are the update mechanism's weird requirements communicated to userspace? The design you've got for the OPAL bits is that the update requirements depends on the secvar backend, but I see nothing plumbing through what the secvar backend actually is.

arch/powerpc/Kconfig config PPC_SECURE_BOOT · line 949

Quoted 9 lines
arch/powerpc/Kconfig +1 -0
index deb19ec6ba3d..89084e4e5054 100644
@@ -946,6 +946,16 @@ config PPC_SECURE_BOOT
 	  to enable OS secure boot on systems that have firmware support for
 	  it. If in doubt say N.
 
+config SECVAR_SYSFS

that should probably be PPC_SECVAR_SYSFS since it's PPC specific

Quoted 32 lines
arch/powerpc/Kconfig +9 -0
+	tristate "Enable sysfs interface for POWER secure variables"
+	depends on PPC_SECURE_BOOT
+	depends on SYSFS
+	help
+	  POWER secure variables are managed and controlled by firmware.
+	  These variables are exposed to userspace via sysfs to enable
+	  read/write operations on these variables. Say Y if you have
+	  secure boot enabled and want to expose variables to userspace.
+
 endmenu
 
 config ISA_DMA_API
arch/powerpc/kernel/Makefile +1 -0
index 3cf26427334f..116a3a5c0557 100644
@@ -162,6 +162,7 @@ obj-y				+= ucall.o
 endif
 
 obj-$(CONFIG_PPC_SECURE_BOOT)	+= secure_boot.o ima_arch.o secvar-ops.o
+obj-$(CONFIG_SECVAR_SYSFS)	+= secvar-sysfs.o
 
 # Disable GCOV, KCOV & sanitizers in odd or sensitive code
 GCOV_PROFILE_prom_init.o := n
arch/powerpc/kernel/secvar-sysfs.c new file +0 -0
new file mode 100644
index 000000000000..87a7cea41523

arch/powerpc/kernel/secvar-sysfs.c line 6

Quoted 6 lines
arch/powerpc/kernel/secvar-sysfs.c new file +6 -0
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 IBM Corporation <[email protected]>
+ *
+ * This code exposes secure variables to user via sysfs
+ */

Adding a pr_fmt for this file would be a good idea. There's a few pr_err()s in here that would benefit from some context.

arch/powerpc/kernel/secvar-sysfs.c line 18

Quoted 11 lines
arch/powerpc/kernel/secvar-sysfs.c new file +10 -0
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/compat.h>
+#include <linux/string.h>
+#include <asm/secvar.h>
 
+/*
+ * Since firmware checks the maximum allowed size, currently, it is default to
+ * 0. In future, it will be read from the device tree.
+ */
+#define VARIABLE_MAX_SIZE  0

I don't see why you aren't reading it from the DT now...

arch/powerpc/kernel/secvar-sysfs.c line 20

Quoted 2 lines
arch/powerpc/kernel/secvar-sysfs.c new file +2 -0
+/* Approximate value */
+#define NAME_MAX_SIZE	   1024

Approximate?

Quoted 17 lines
arch/powerpc/kernel/secvar-sysfs.c new file +17 -0
+static struct kobject *secvar_kobj;
+static struct kset *secvar_kset;
+
+static ssize_t size_show(struct kobject *kobj, struct kobj_attribute *attr,
+			 char *buf)
+{
+	uint64_t dsize;
+	int rc;
+
+	rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, NULL, &dsize);
+	if (rc) {
+		pr_err("Error retrieving variable size %d\n", rc);
+		return rc;
+	}
+
+	rc = sprintf(buf, "%llu\n", dsize);
+

arch/powerpc/kernel/secvar-sysfs.c line 48

Quoted 10 lines
arch/powerpc/kernel/secvar-sysfs.c new file +10 -0
+	return rc;
+}
+
+static ssize_t data_read(struct file *filep, struct kobject *kobj,
+			 struct bin_attribute *attr, char *buf, loff_t off,
+			 size_t count)
+{
+	uint64_t dsize;
+	int rc;
+	char *data;

Can you swap the declarations of rc and data.

We try to keep declarations in reverse christmas tree style in arch/powerpc/. We're pretty bad at enforcing that, but there's no reason to be gratuitiously different.

Quoted 38 lines
arch/powerpc/kernel/secvar-sysfs.c new file +38 -0
+
+	rc = secvar_ops->get(kobj->name, strlen(kobj->name) + 1, NULL, &dsize);
+	if (rc) {
+		pr_err("Error getting variable size %d\n", rc);
+		return rc;
+	}
+	pr_debug("dsize is %llu\n", dsize);
+
+	data = kzalloc(dsize, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	rc = secvar_ops->get(kobj->name, strlen(kobj->name)+1, data, &dsize);
+	if (rc) {
+		pr_err("Error getting variable %d\n", rc);
+		goto data_fail;
+	}
+
+	rc = memory_read_from_buffer(buf, count, &off, data, dsize);
+
+data_fail:
+	kfree(data);
+	return rc;
+}
+
+static ssize_t update_write(struct file *filep, struct kobject *kobj,
+			    struct bin_attribute *attr, char *buf, loff_t off,
+			    size_t count)
+{
+	int rc;
+
+	pr_debug("count is %ld\n", count);
+	rc = secvar_ops->set(kobj->name, strlen(kobj->name)+1, buf, count);
+	if (rc) {
+		pr_err("Error setting the variable %s\n", kobj->name);
+		return rc;
+	}
+

arch/powerpc/kernel/secvar-sysfs.c line 95

Quoted 10 lines
arch/powerpc/kernel/secvar-sysfs.c new file +9 -0
+	return count;
+}
+
 
+static struct kobj_attribute size_attr = __ATTR_RO(size);
+
+static struct bin_attribute data_attr = __BIN_ATTR_RO(data, VARIABLE_MAX_SIZE);
+
+static struct bin_attribute update_attr = __BIN_ATTR_WO(update,
+							VARIABLE_MAX_SIZE);

Isn't this going to be all wrong if VARIABLE_MAX_SIZE is ever non-zero?

Quoted 93 lines
arch/powerpc/kernel/secvar-sysfs.c new file +93 -0
+
+static struct bin_attribute  *secvar_bin_attrs[] = {
+	&data_attr,
+	&update_attr,
+	NULL,
+};
+
+static struct attribute *secvar_attrs[] = {
+	&size_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group secvar_attr_group = {
+	.attrs = secvar_attrs,
+	.bin_attrs = secvar_bin_attrs,
+};
+__ATTRIBUTE_GROUPS(secvar_attr);
+
+static struct kobj_type secvar_ktype = {
+	.sysfs_ops	= &kobj_sysfs_ops,
+	.default_groups = secvar_attr_groups,
+};
+
+static int secvar_sysfs_load(void)
+{
+	char *name;
+	uint64_t namesize = 0;
+	struct kobject *kobj;
+	int rc;
+
+	name = kzalloc(NAME_MAX_SIZE, GFP_KERNEL);
+	if (!name)
+		return -ENOMEM;
+
+	do {
+		rc = secvar_ops->get_next(name, &namesize, NAME_MAX_SIZE);
+		if (rc) {
+			if (rc != -ENOENT)
+				pr_err("error getting secvar from firmware %d\n",
+					rc);
+			break;
+		}
+
+		kobj = kzalloc(sizeof(*kobj), GFP_KERNEL);
+		if (!kobj)
+			return -ENOMEM;
+
+		kobject_init(kobj, &secvar_ktype);
+
+		rc = kobject_add(kobj, &secvar_kset->kobj, "%s", name);
+		if (rc) {
+			pr_warn("kobject_add error %d for attribute: %s\n", rc,
+				name);
+			kobject_put(kobj);
+			kobj = NULL;
+		}
+
+		if (kobj)
+			kobject_uevent(kobj, KOBJ_ADD);
+
+	} while (!rc);
+
+	kfree(name);
+	return rc;
+}
+
+static int secvar_sysfs_init(void)
+{
+	if (!secvar_ops) {
+		pr_warn("secvar: failed to retrieve secvar operations.\n");
+		return -ENODEV;
+	}
+
+	secvar_kobj = kobject_create_and_add("secvar", firmware_kobj);
+	if (!secvar_kobj) {
+		pr_err("secvar: Failed to create firmware kobj\n");
+		return -ENOMEM;
+	}
+
+	secvar_kset = kset_create_and_add("vars", NULL, secvar_kobj);
+	if (!secvar_kset) {
+		pr_err("secvar: sysfs kobject registration failed.\n");
+		kobject_put(secvar_kobj);
+		return -ENOMEM;
+	}
+
+	secvar_sysfs_load();
+
+	return 0;
+}
+
+static void secvar_sysfs_exit(void)
+{

arch/powerpc/kernel/secvar-sysfs.c line 198

Quoted 10 lines
arch/powerpc/kernel/secvar-sysfs.c new file +10 -0
+	kset_unregister(secvar_kset);
+	kobject_put(secvar_kobj);
+}
+
+module_init(secvar_sysfs_init);
+module_exit(secvar_sysfs_exit);
+
+MODULE_AUTHOR("Nayna Jain <[email protected]>");
+MODULE_DESCRIPTION("sysfs interface to POWER secure variables");
+MODULE_LICENSE("GPL");

Is there anything that'll force the module to be loaded at runtime?

If not it might be worth making this builtin and turning the OPAL API bit into a platform device driver. We can instantiate a platform device from the DT node during opal_init() and the modalias based module loading should handle the rest for you.

I would like to get people using platform device drivers for random OPAL provided stuff. All the ~artisinal~hand~crafted~ device-tree parsing in the powernv platform is getting a bit ridiculous...

Oliver

author
#5 lore raw

PATCH v4 3/4 x86/efi: move common keyring handler functions to new file

In reply to Nayna Jain

The handlers to add the keys to the .platform keyring and blacklisted hashes to the .blacklist keyring is common for both the uefi and powerpc mechanisms of loading the keys/hashes from the firmware.

This patch moves the common code from load_uefi.c to keyring_handler.c

---
 security/integrity/Makefile                   |  3 +-
 .../platform_certs/keyring_handler.c          | 80 +++++++++++++++++++
 .../platform_certs/keyring_handler.h          | 32 ++++++++
 security/integrity/platform_certs/load_uefi.c | 67 +---------------
 4 files changed, 115 insertions(+), 67 deletions(-)
 create mode 100644 security/integrity/platform_certs/keyring_handler.c
 create mode 100644 security/integrity/platform_certs/keyring_handler.h
security/integrity/Makefile +2 -1
index 19faace69644..525bf1d6e0db 100644
@@ -11,7 +11,8 @@ integrity-$(CONFIG_INTEGRITY_SIGNATURE) += digsig.o
 integrity-$(CONFIG_INTEGRITY_ASYMMETRIC_KEYS) += digsig_asymmetric.o
 integrity-$(CONFIG_INTEGRITY_PLATFORM_KEYRING) += platform_certs/platform_keyring.o
 integrity-$(CONFIG_LOAD_UEFI_KEYS) += platform_certs/efi_parser.o \
-					platform_certs/load_uefi.o
+				      platform_certs/load_uefi.o \
+				      platform_certs/keyring_handler.o
 integrity-$(CONFIG_LOAD_IPL_KEYS) += platform_certs/load_ipl_s390.o
 $(obj)/load_uefi.o: KBUILD_CFLAGS += -fshort-wchar
 
security/integrity/platform_certs/keyring_handler.c new file +80 -0

80 lines not on this page · raw message

security/integrity/platform_certs/keyring_handler.h new file +32 -0
new file mode 100644
index 000000000000..2462bfa08fe3
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef PLATFORM_CERTS_INTERNAL_H
+#define PLATFORM_CERTS_INTERNAL_H
+
+#include <linux/efi.h>
+
+void blacklist_hash(const char *source, const void *data,
+		    size_t len, const char *type,
+		    size_t type_len);
+
+/*
+ * Blacklist an X509 TBS hash.
+ */
+void blacklist_x509_tbs(const char *source, const void *data, size_t len);
+
+/*
+ * Blacklist the hash of an executable.
+ */
+void blacklist_binary(const char *source, const void *data, size_t len);
+
+/*
+ * Return the handler for particular signature list types found in the db.
+ */
+efi_element_handler_t get_handler_for_db(const efi_guid_t *sig_type);
+
+/*
+ * Return the handler for particular signature list types found in the dbx.
+ */
+efi_element_handler_t get_handler_for_dbx(const efi_guid_t *sig_type);
+
+#endif
security/integrity/platform_certs/load_uefi.c +1 -66

79 lines not on this page · raw message

Signature · 1 line
2.20.1
author
#6 lore raw

PATCH v4 4/4 powerpc: load firmware trusted keys/hashes into kernel keyring

In reply to Nayna Jain

The keys used to verify the Host OS kernel are managed by firmware as secure variables. This patch loads the verification keys into the .platform keyring and revocation hashes into .blacklist keyring. This enables verification and loading of the kernels signed by the boot time keys which are trusted by firmware.

---
 security/integrity/Kconfig                    |  8 ++
 security/integrity/Makefile                   |  3 +
 .../integrity/platform_certs/load_powerpc.c   | 86 +++++++++++++++++++
 3 files changed, 97 insertions(+)
 create mode 100644 security/integrity/platform_certs/load_powerpc.c
security/integrity/Kconfig +8 -0
index 0bae6adb63a9..26abee23e4e3 100644
@@ -72,6 +72,14 @@ config LOAD_IPL_KEYS
        depends on S390
        def_bool y
 
+config LOAD_PPC_KEYS
+	bool "Enable loading of platform and blacklisted keys for POWER"
+	depends on INTEGRITY_PLATFORM_KEYRING
+	depends on PPC_SECURE_BOOT
+	help
+	  Enable loading of keys to the .platform keyring and blacklisted
+	  hashes to the .blacklist keyring for powerpc based platforms.
+
 config INTEGRITY_AUDIT
 	bool "Enables integrity auditing support "
 	depends on AUDIT
security/integrity/Makefile +3 -0
index 525bf1d6e0db..9eeb6b053de3 100644
@@ -14,6 +14,9 @@ integrity-$(CONFIG_LOAD_UEFI_KEYS) += platform_certs/efi_parser.o \
 				      platform_certs/load_uefi.o \
 				      platform_certs/keyring_handler.o
 integrity-$(CONFIG_LOAD_IPL_KEYS) += platform_certs/load_ipl_s390.o
+integrity-$(CONFIG_LOAD_PPC_KEYS) += platform_certs/efi_parser.o \
+					 platform_certs/load_powerpc.o \
+					 platform_certs/keyring_handler.o
 $(obj)/load_uefi.o: KBUILD_CFLAGS += -fshort-wchar
 
 subdir-$(CONFIG_IMA)			+= ima
security/integrity/platform_certs/load_powerpc.c new file +86 -0

86 lines not on this page · raw message

Signature · 1 line
2.20.1