Skip to contentSkip to conversation

UFS driver general fixes bundle 3

PATCH Superseded Can Guo 2 participants 9 messages Nov 2, 2019 – Nov 4, 2019

Subsystems (2)

v1 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Can Guo

author
#0 lore raw

cover UFS driver general fixes bundle 3

This bundle includes 6 general fixes for UFS driver.

Asutosh Das (1):
scsi: ufs: Abort gating if clock on request is pending

Can Guo (3):
scsi: ufs: Add device reset in link recovery path
scsi: ufs-qcom: Add reset control support for host controller
scsi: ufs: Fix up auto hibern8 enablement

Subhash Jadavani (1):
scsi: ufs: Fix error handing during hibern8 enter

Venkat Gopalakrishnan (1):
scsi: ufs: Fix irq return code

 drivers/scsi/ufs/ufs-qcom.c  |  53 ++++++++++++++
 drivers/scsi/ufs/ufs-qcom.h  |   3 +
 drivers/scsi/ufs/ufs-sysfs.c |   5 +-
 drivers/scsi/ufs/ufshcd.c    | 170 +++++++++++++++++++++++++++++++------------
 4 files changed, 183 insertions(+), 48 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
author
#1 lore raw

PATCH 1/6 scsi: ufs: Add device reset in link recovery path

In order to recover from hibern8 exit failure, perform a reset in link recovery path before issuing link start-up.

---
 drivers/scsi/ufs/ufshcd.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/scsi/ufs/ufshcd.c +3 -0
index c28c144..525f8e6 100644
@@ -3859,6 +3859,9 @@ static int ufshcd_link_recovery(struct ufs_hba *hba)
 	ufshcd_set_eh_in_progress(hba);
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
+	/* Reset the attached device */
+	ufshcd_vops_device_reset(hba);
+
 	ret = ufshcd_host_reset_and_restore(hba);
 
 	spin_lock_irqsave(hba->host->host_lock, flags);
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#2 lore raw

RE: [EXT] [PATCH v1 1/6] scsi: ufs: Add device reset in link recovery path

Hi, Can Guo

Quoted 13 lines

In order to recover from hibern8 exit failure, perform a reset in link recovery path before issuing link start-up.

---
 drivers/scsi/ufs/ufshcd.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/scsi/ufs/ufshcd.c index renamed from drivers/scsi/ufs/ufshcd.c +0 -0

c28c144..525f8e6 100644

drivers/scsi/ufs/ufshcd.c static int ufshcd_link_recovery(struct ufs_hba *hba) · line 3866

Quoted 8 lines
drivers/scsi/ufs/ufshcd.c +3 -0
@@ -3859,6 +3859,9 @@ static int ufshcd_link_recovery(struct ufs_hba *hba)
 	ufshcd_set_eh_in_progress(hba);
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
+	/* Reset the attached device */
+	ufshcd_vops_device_reset(hba);
+
 	ret = ufshcd_host_reset_and_restore(hba);
 

There is time consumption in reset, It is true that reset can hide/solve some issues. I don't know if you experienced issue resulting from an absent reset in this case mentioned in Patch commit comment.

Quoted 4 lines
drivers/scsi/ufs/ufshcd.c +0 -1
 	spin_lock_irqsave(hba->host->host_lock, flags);
--

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

#3 lore raw

Re: [EXT] [PATCH v1 1/6] scsi: ufs: Add device reset in link recovery path

Quoted 19 lines · Bean Huo (beanhuo)

Hi, Can Guo

Quoted 17 lines

In order to recover from hibern8 exit failure, perform a reset in link recovery path before issuing link start-up.

---
 drivers/scsi/ufs/ufshcd.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/scsi/ufs/ufshcd.c index renamed from drivers/scsi/ufs/ufshcd.c +0 -0

c28c144..525f8e6 100644

drivers/scsi/ufs/ufshcd.c +0 -0
@@ -3859,6 +3859,9 @@ static int ufshcd_link_recovery(struct ufs_hba 
 *hba)
 	ufshcd_set_eh_in_progress(hba);
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
Quoted 11 lines

drivers/scsi/ufs/ufshcd.c static int ufshcd_link_recovery(struct ufs_hba *hba) · line 3866

Quoted 5 lines
drivers/scsi/ufs/ufshcd.c +3 -0
+	/* Reset the attached device */
+	ufshcd_vops_device_reset(hba);
+
 	ret = ufshcd_host_reset_and_restore(hba);
 

There is time consumption in reset, It is true that reset can hide/solve some issues.
I don't know if you experienced issue resulting from an absent reset in this case mentioned in
Patch commit comment.

Hi Bean,

Yes, we did see some issues without this device reset here. For example, link start-up failure and/or NOP-IN timeout during probe stage.

Best regards,
Can Guo.

Quoted 4 lines
Quoted 4 lines

spin_lock_irqsave(hba->host->host_lock, flags);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

author
#4 lore raw

PATCH 2/6 scsi: ufs-qcom: Add reset control support for host controller

In reply to Can Guo

Add reset control for host controller so that host controller can be reset as required in its power up sequence.

---
 drivers/scsi/ufs/ufs-qcom.c | 53 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/ufs-qcom.h |  3 +++
 2 files changed, 56 insertions(+)
drivers/scsi/ufs/ufs-qcom.c +53 -0
index a5b7148..c69c29a1c 100644
@@ -246,6 +246,44 @@ static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
 	mb();
 }
 
+/**
+ * ufs_qcom_host_reset - reset host controller and PHY
+ */
+static int ufs_qcom_host_reset(struct ufs_hba *hba)
+{
+	int ret = 0;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+	if (!host->core_reset) {
+		dev_warn(hba->dev, "%s: reset control not set\n", __func__);
+		goto out;
+	}
+
+	ret = reset_control_assert(host->core_reset);
+	if (ret) {
+		dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n",
+				 __func__, ret);
+		goto out;
+	}
+
+	/*
+	 * The hardware requirement for delay between assert/deassert
+	 * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to
+	 * ~125us (4/32768). To be on the safe side add 200us delay.
+	 */
+	usleep_range(200, 210);
+
+	ret = reset_control_deassert(host->core_reset);
+	if (ret)
+		dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n",
+				 __func__, ret);
+
+	usleep_range(1000, 1100);
+
+out:
+	return ret;
+}
+
 static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@@ -254,6 +292,12 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 	bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B)
 							? true : false;
 
+	/* Reset UFS Host Controller and PHY */
+	ret = ufs_qcom_host_reset(hba);
+	if (ret)
+		dev_warn(hba->dev, "%s: host reset returned %d\n",
+				  __func__, ret);
+
 	if (is_rate_B)
 		phy_set_mode(phy, PHY_MODE_UFS_HS_B);
 
@@ -1101,6 +1145,15 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 	host->hba = hba;
 	ufshcd_set_variant(hba, host);
 
+	/* Setup the reset control of HCI */
+	host->core_reset = devm_reset_control_get(hba->dev, "rst");
+	if (IS_ERR(host->core_reset)) {
+		err = PTR_ERR(host->core_reset);
+		dev_warn(dev, "Failed to get reset control %d\n", err);
+		host->core_reset = NULL;
+		err = 0;
+	}
+
 	/* Fire up the reset controller. Failure here is non-fatal. */
 	host->rcdev.of_node = dev->of_node;
 	host->rcdev.ops = &ufs_qcom_reset_ops;
drivers/scsi/ufs/ufs-qcom.h +3 -0
index d401f17..2d95e7c 100644
@@ -6,6 +6,7 @@
 #define UFS_QCOM_H_
 
 #include <linux/reset-controller.h>
+#include <linux/reset.h>
 
 #define MAX_UFS_QCOM_HOSTS	1
 #define MAX_U32                 (~(u32)0)
@@ -233,6 +234,8 @@ struct ufs_qcom_host {
 	u32 dbg_print_en;
 	struct ufs_qcom_testbus testbus;
 
+	/* Reset control of HCI */
+	struct reset_control *core_reset;
 	struct reset_controller_dev rcdev;
 
 	struct gpio_desc *device_reset;
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
author
#5 lore raw

PATCH 3/6 scsi: ufs: Fix up auto hibern8 enablement

In reply to Can Guo

Fix up possible unclocked register access to auto hibern8 register in resume path and through sysfs entry. Meanwhile, enable auto hibern8 only after device is fully initialized in probe path.

---
 drivers/scsi/ufs/ufs-sysfs.c |  5 ++++-
 drivers/scsi/ufs/ufshcd.c    | 12 ++++++------
 2 files changed, 10 insertions(+), 7 deletions(-)
drivers/scsi/ufs/ufs-sysfs.c +4 -1
index 969a36b..de124f4 100644
@@ -129,8 +129,11 @@ static void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit)
 	if (hba->ahit == ahit)
 		goto out_unlock;
 	hba->ahit = ahit;
-	if (!pm_runtime_suspended(hba->dev))
+	if (!pm_runtime_suspended(hba->dev)) {
+		ufshcd_hold(hba, false);
 		ufshcd_writel(hba, hba->ahit, REG_AUTO_HIBERNATE_IDLE_TIMER);
+		ufshcd_release(hba);
+	}
 out_unlock:
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 }
drivers/scsi/ufs/ufshcd.c +6 -6
index 525f8e6..f12f5a7 100644
@@ -6892,9 +6892,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
 	/* UniPro link is active now */
 	ufshcd_set_link_active(hba);
 
-	/* Enable Auto-Hibernate if configured */
-	ufshcd_auto_hibern8_enable(hba);
-
 	ret = ufshcd_verify_dev_init(hba);
 	if (ret)
 		goto out;
@@ -6945,6 +6942,9 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
 	/* set the state as operational after switching to desired gear */
 	hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
 
+	/* Enable Auto-Hibernate if configured */
+	ufshcd_auto_hibern8_enable(hba);
+
 	/*
 	 * If we are in error handling context or in power management callbacks
 	 * context, no need to scan the host
@@ -7962,12 +7962,12 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	if (hba->clk_scaling.is_allowed)
 		ufshcd_resume_clkscaling(hba);
 
-	/* Schedule clock gating in case of no access to UFS device yet */
-	ufshcd_release(hba);
-
 	/* Enable Auto-Hibernate if configured */
 	ufshcd_auto_hibern8_enable(hba);
 
+	/* Schedule clock gating in case of no access to UFS device yet */
+	ufshcd_release(hba);
+
 	goto out;
 
 set_old_link_state:
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
author
#6 lore raw

PATCH 4/6 scsi: ufs: Fix irq return code

In reply to Can Guo

From: Venkat Gopalakrishnan <[email protected]>

Return IRQ_HANDLED only if the irq is really handled, this will help in catching spurious interrupts that go unhandled.

---
 drivers/scsi/ufs/ufshcd.c | 134 ++++++++++++++++++++++++++++++++++------------
 1 file changed, 99 insertions(+), 35 deletions(-)
drivers/scsi/ufs/ufshcd.c +99 -35
index f12f5a7..ee591cc 100644
@@ -240,7 +240,7 @@ struct ufs_pm_lvl_states ufs_pm_lvl_states[] = {
 	END_FIX
 };
 
-static void ufshcd_tmc_handler(struct ufs_hba *hba);
+static irqreturn_t ufshcd_tmc_handler(struct ufs_hba *hba);
 static void ufshcd_async_scan(void *data, async_cookie_t cookie);
 static int ufshcd_reset_and_restore(struct ufs_hba *hba);
 static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd);
@@ -4799,19 +4799,29 @@ static void ufshcd_slave_destroy(struct scsi_device *sdev)
  * ufshcd_uic_cmd_compl - handle completion of uic command
  * @hba: per adapter instance
  * @intr_status: interrupt status generated by the controller
+ *
+ * Returns
+ *  IRQ_HANDLED - If interrupt is valid
+ *  IRQ_NONE    - If invalid interrupt
  */
-static void ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
+static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
 {
+	irqreturn_t retval = IRQ_NONE;
+
 	if ((intr_status & UIC_COMMAND_COMPL) && hba->active_uic_cmd) {
 		hba->active_uic_cmd->argument2 |=
 			ufshcd_get_uic_cmd_result(hba);
 		hba->active_uic_cmd->argument3 =
 			ufshcd_get_dme_attr_val(hba);
 		complete(&hba->active_uic_cmd->done);
+		retval = IRQ_HANDLED;
 	}
 
-	if ((intr_status & UFSHCD_UIC_PWR_MASK) && hba->uic_async_done)
+	if ((intr_status & UFSHCD_UIC_PWR_MASK) && hba->uic_async_done) {
 		complete(hba->uic_async_done);
+		retval = IRQ_HANDLED;
+	}
+	return retval;
 }
 
 /**
@@ -4867,8 +4877,12 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
 /**
  * ufshcd_transfer_req_compl - handle SCSI and query command completion
  * @hba: per adapter instance
+ *
+ * Returns
+ *  IRQ_HANDLED - If interrupt is valid
+ *  IRQ_NONE    - If invalid interrupt
  */
-static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
+static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba)
 {
 	unsigned long completed_reqs;
 	u32 tr_doorbell;
@@ -4887,7 +4901,12 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
 	tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 	completed_reqs = tr_doorbell ^ hba->outstanding_reqs;
 
-	__ufshcd_transfer_req_compl(hba, completed_reqs);
+	if (completed_reqs) {
+		__ufshcd_transfer_req_compl(hba, completed_reqs);
+		return IRQ_HANDLED;
+	} else {
+		return IRQ_NONE;
+	}
 }
 
 /**
@@ -5406,61 +5425,77 @@ static void ufshcd_err_handler(struct work_struct *work)
 /**
  * ufshcd_update_uic_error - check and set fatal UIC error flags.
  * @hba: per-adapter instance
+ *
+ * Returns
+ *  IRQ_HANDLED - If interrupt is valid
+ *  IRQ_NONE    - If invalid interrupt
  */
-static void ufshcd_update_uic_error(struct ufs_hba *hba)
+static irqreturn_t ufshcd_update_uic_error(struct ufs_hba *hba)
 {
 	u32 reg;
+	irqreturn_t retval = IRQ_NONE;
 
 	/* PHY layer lane error */
 	reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER);
 	/* Ignore LINERESET indication, as this is not an error */
 	if ((reg & UIC_PHY_ADAPTER_LAYER_ERROR) &&
-			(reg & UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK)) {
+	    (reg & UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK)) {
 		/*
 		 * To know whether this error is fatal or not, DB timeout
 		 * must be checked but this error is handled separately.
 		 */
 		dev_dbg(hba->dev, "%s: UIC Lane error reported\n", __func__);
 		ufshcd_update_reg_hist(&hba->ufs_stats.pa_err, reg);
+		retval |= IRQ_HANDLED;
 	}
 
 	/* PA_INIT_ERROR is fatal and needs UIC reset */
 	reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DATA_LINK_LAYER);
-	if (reg)
+	if ((reg & UIC_DATA_LINK_LAYER_ERROR) &&
+	    (reg & UIC_DATA_LINK_LAYER_ERROR_CODE_MASK)) {
 		ufshcd_update_reg_hist(&hba->ufs_stats.dl_err, reg);
 
-	if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT)
-		hba->uic_error |= UFSHCD_UIC_DL_PA_INIT_ERROR;
-	else if (hba->dev_quirks &
-		   UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS) {
-		if (reg & UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED)
-			hba->uic_error |=
-				UFSHCD_UIC_DL_NAC_RECEIVED_ERROR;
-		else if (reg & UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT)
-			hba->uic_error |= UFSHCD_UIC_DL_TCx_REPLAY_ERROR;
+		if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT)
+			hba->uic_error |= UFSHCD_UIC_DL_PA_INIT_ERROR;
+		else if (hba->dev_quirks &
+				UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS) {
+			if (reg & UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED)
+				hba->uic_error |=
+					UFSHCD_UIC_DL_NAC_RECEIVED_ERROR;
+			else if (reg & UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT)
+				hba->uic_error |= UFSHCD_UIC_DL_TCx_REPLAY_ERROR;
+		}
+		retval |= IRQ_HANDLED;
 	}
 
 	/* UIC NL/TL/DME errors needs software retry */
 	reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_NETWORK_LAYER);
-	if (reg) {
+	if ((reg & UIC_NETWORK_LAYER_ERROR) &&
+	    (reg & UIC_NETWORK_LAYER_ERROR_CODE_MASK)) {
 		ufshcd_update_reg_hist(&hba->ufs_stats.nl_err, reg);
 		hba->uic_error |= UFSHCD_UIC_NL_ERROR;
+		retval |= IRQ_HANDLED;
 	}
 
 	reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_TRANSPORT_LAYER);
-	if (reg) {
+	if ((reg & UIC_TRANSPORT_LAYER_ERROR) &&
+	    (reg & UIC_TRANSPORT_LAYER_ERROR_CODE_MASK)) {
 		ufshcd_update_reg_hist(&hba->ufs_stats.tl_err, reg);
 		hba->uic_error |= UFSHCD_UIC_TL_ERROR;
+		retval |= IRQ_HANDLED;
 	}
 
 	reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DME);
-	if (reg) {
+	if ((reg & UIC_DME_ERROR) &&
+	    (reg & UIC_DME_ERROR_CODE_MASK)) {
 		ufshcd_update_reg_hist(&hba->ufs_stats.dme_err, reg);
 		hba->uic_error |= UFSHCD_UIC_DME_ERROR;
+		retval |= IRQ_HANDLED;
 	}
 
 	dev_dbg(hba->dev, "%s: UIC error flags = 0x%08x\n",
 			__func__, hba->uic_error);
+	return retval;
 }
 
 static bool ufshcd_is_auto_hibern8_error(struct ufs_hba *hba,
@@ -5483,10 +5518,15 @@ static bool ufshcd_is_auto_hibern8_error(struct ufs_hba *hba,
 /**
  * ufshcd_check_errors - Check for errors that need s/w attention
  * @hba: per-adapter instance
+ *
+ * Returns
+ *  IRQ_HANDLED - If interrupt is valid
+ *  IRQ_NONE    - If invalid interrupt
  */
-static void ufshcd_check_errors(struct ufs_hba *hba)
+static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba)
 {
 	bool queue_eh_work = false;
+	irqreturn_t retval = IRQ_NONE;
 
 	if (hba->errors & INT_FATAL_ERRORS) {
 		ufshcd_update_reg_hist(&hba->ufs_stats.fatal_err, hba->errors);
@@ -5495,7 +5535,7 @@ static void ufshcd_check_errors(struct ufs_hba *hba)
 
 	if (hba->errors & UIC_ERROR) {
 		hba->uic_error = 0;
-		ufshcd_update_uic_error(hba);
+		retval = ufshcd_update_uic_error(hba);
 		if (hba->uic_error)
 			queue_eh_work = true;
 	}
@@ -5543,6 +5583,7 @@ static void ufshcd_check_errors(struct ufs_hba *hba)
 			}
 			schedule_work(&hba->eh_work);
 		}
+		retval |= IRQ_HANDLED;
 	}
 	/*
 	 * if (!queue_eh_work) -
@@ -5550,44 +5591,62 @@ static void ufshcd_check_errors(struct ufs_hba *hba)
 	 * itself without s/w intervention or errors that will be
 	 * handled by the SCSI core layer.
 	 */
+	return retval;
 }
 
 /**
  * ufshcd_tmc_handler - handle task management function completion
  * @hba: per adapter instance
+ *
+ * Returns
+ *  IRQ_HANDLED - If interrupt is valid
+ *  IRQ_NONE    - If invalid interrupt
  */
-static void ufshcd_tmc_handler(struct ufs_hba *hba)
+static irqreturn_t ufshcd_tmc_handler(struct ufs_hba *hba)
 {
 	u32 tm_doorbell;
 
 	tm_doorbell = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL);
 	hba->tm_condition = tm_doorbell ^ hba->outstanding_tasks;
-	wake_up(&hba->tm_wq);
+	if (hba->tm_condition) {
+		wake_up(&hba->tm_wq);
+		return IRQ_HANDLED;
+	} else {
+		return IRQ_NONE;
+	}
 }
 
 /**
  * ufshcd_sl_intr - Interrupt service routine
  * @hba: per adapter instance
  * @intr_status: contains interrupts generated by the controller
+ *
+ * Returns
+ *  IRQ_HANDLED - If interrupt is valid
+ *  IRQ_NONE    - If invalid interrupt
  */
-static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
+static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
 {
+	irqreturn_t retval = IRQ_NONE;
+
 	hba->errors = UFSHCD_ERROR_MASK & intr_status;
 
 	if (ufshcd_is_auto_hibern8_error(hba, intr_status))
 		hba->errors |= (UFSHCD_UIC_HIBERN8_MASK & intr_status);
 
 	if (hba->errors)
-		ufshcd_check_errors(hba);
+		retval |= ufshcd_check_errors(hba);
 
 	if (intr_status & UFSHCD_UIC_MASK)
-		ufshcd_uic_cmd_compl(hba, intr_status);
+		retval |= ufshcd_uic_cmd_compl(hba, intr_status);
 
 	if (intr_status & UTP_TASK_REQ_COMPL)
-		ufshcd_tmc_handler(hba);
+		retval |= ufshcd_tmc_handler(hba);
 
 	if (intr_status & UTP_TRANSFER_REQ_COMPL)
-		ufshcd_transfer_req_compl(hba);
+		retval |= ufshcd_transfer_req_compl(hba);
+
+	return retval;
 }
 
 /**
@@ -5595,8 +5654,9 @@ static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
  * @irq: irq number
  * @__hba: pointer to adapter instance
  *
- * Returns IRQ_HANDLED - If interrupt is valid
- *		IRQ_NONE - If invalid interrupt
+ * Returns
+ *  IRQ_HANDLED - If interrupt is valid
+ *  IRQ_NONE    - If invalid interrupt
  */
 static irqreturn_t ufshcd_intr(int irq, void *__hba)
 {
@@ -5619,14 +5679,18 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba)
 			intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE);
 		if (intr_status)
 			ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS);
-		if (enabled_intr_status) {
-			ufshcd_sl_intr(hba, enabled_intr_status);
-			retval = IRQ_HANDLED;
-		}
+		if (enabled_intr_status)
+			retval |= ufshcd_sl_intr(hba, enabled_intr_status);
 
 		intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
 	} while (intr_status && --retries);
 
+	if (retval == IRQ_NONE) {
+		dev_err(hba->dev, "%s: Unhandled interrupt 0x%08x\n",
+					__func__, intr_status);
+		ufshcd_dump_regs(hba, 0, UFSHCI_REG_SPACE_SIZE, "host_regs: ");
+	}
+
 	spin_unlock(hba->host->host_lock);
 	return retval;
 }
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
author
#7 lore raw

PATCH 5/6 scsi: ufs: Abort gating if clock on request is pending

In reply to Can Guo

From: Asutosh Das <[email protected]>

This change attempts to abort gating of clocks if a request to turn-on clocks is pending.
This would in turn avoid turning OFF and back ON the clocks.

---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -1
index ee591cc..c9ef2dd 100644
@@ -1610,7 +1610,7 @@ static void ufshcd_gate_work(struct work_struct *work)
 	 * state to CLKS_ON.
 	 */
 	if (hba->clk_gating.is_suspended ||
-		(hba->clk_gating.state == REQ_CLKS_ON)) {
+		(hba->clk_gating.state != REQ_CLKS_OFF)) {
 		hba->clk_gating.state = CLKS_ON;
 		trace_ufshcd_clk_gating(dev_name(hba->dev),
 					hba->clk_gating.state);
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
author
#8 lore raw

PATCH 6/6 scsi: ufs: Fix error handing during hibern8 enter

In reply to Can Guo

From: Subhash Jadavani <[email protected]>

During clock gating (ufshcd_gate_work()), we first put the link hibern8 by calling ufshcd_uic_hibern8_enter() and if ufshcd_uic_hibern8_enter() returns success (0) then we gate all the clocks.
Now let’s zoom in to what ufshcd_uic_hibern8_enter() does internally:
It calls __ufshcd_uic_hibern8_enter() which on detecting the LINERESET, initiates the full recovery and puts the link back to highest HS gear and returns success (0) to ufshcd_uic_hibern8_enter() which is the issue as link is still in active state due to recovery!
Now ufshcd_uic_hibern8_enter() returns success to ufshcd_gate_work() and hence it goes ahead with gating the UFS clock while link is still in active state hence I believe controller would raise UIC error interrupts. But when we service the interrupt, clocks might have already been disabled!

This change fixes for this by returning failure from __ufshcd_uic_hibern8_enter() if recovery succeeds as link is still not in hibern8, upon receiving the error ufshcd_hibern8_enter() would initiate retry to put the link state back into hibern8.

---
 drivers/scsi/ufs/ufshcd.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)
drivers/scsi/ufs/ufshcd.c +14 -5
index c9ef2dd..1201578 100644
@@ -3891,15 +3891,24 @@ static int __ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
 			     ktime_to_us(ktime_sub(ktime_get(), start)), ret);
 
 	if (ret) {
+		int err;
+
 		dev_err(hba->dev, "%s: hibern8 enter failed. ret = %d\n",
 			__func__, ret);
 
 		/*
-		 * If link recovery fails then return error so that caller
-		 * don't retry the hibern8 enter again.
+		 * If link recovery fails then return error code (-ENOLINK)
+		 * returned ufshcd_link_recovery().
+		 * If link recovery succeeds then return -EAGAIN to attempt
+		 * hibern8 enter retry again.
 		 */
-		if (ufshcd_link_recovery(hba))
-			ret = -ENOLINK;
+		err = ufshcd_link_recovery(hba);
+		if (err) {
+			dev_err(hba->dev, "%s: link recovery failed", __func__);
+			ret = err;
+		} else {
+			ret = -EAGAIN;
+		}
 	} else
 		ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_ENTER,
 								POST_CHANGE);
@@ -3913,7 +3922,7 @@ static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
 
 	for (retries = UIC_HIBERN8_ENTER_RETRIES; retries > 0; retries--) {
 		ret = __ufshcd_uic_hibern8_enter(hba);
-		if (!ret || ret == -ENOLINK)
+		if (!ret)
 			goto out;
 	}
 out:
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project