Skip to contentSkip to conversation

rockchip: rk3399: TPL: rockpro64: Wrong memory size detected

U-Boot Kurt Miller 4 participants 13 messages Aug 28, 2019 – Nov 18, 2019 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

The board has 4G memory but only 2G is detected by TPL. Please let me know if additional information is needed.

With u-boot master TPL output:

U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Aug 28 2019 - 17:26:44) LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...

With rkbin rk3399_ddr_800MHz_v1.23.bin output:

DDR Version 1.23 20190709
In
channel 0
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB 256B stride
channel 0
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
OUT

#1 lore raw

Re-testing with master as of Sep 12 and the wrong memory size continues to be detected (2G detected while the board has 4G).

The board has the following marking on it:

Rockpro64_V2.1 2018-07-02

RAM Chips:
PS052-053 BT
83RL

I'd be happy to test any proposed patches to correct the memory size detection on this board.

Quoted 83 lines · Kurt Miller

The board has 4G memory but only 2G is detected by TPL. Please let me know if additional information is needed.

With u-boot master TPL output:

U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Aug 28 2019 - 17:26:44) LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...

With rkbin rk3399_ddr_800MHz_v1.23.bin output:

DDR Version 1.23 20190709
In
channel 0
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB 256B stride
channel 0
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
OUT

#2 lore raw

[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】 detected

Hi Kurt,

    Could you try with below update:

(quoted diff) +0 -0

b/arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi
index 4a4414a960..dc9db047cb 100644

arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +4 -4
@@ -13,8 +13,8 @@
                 0x2
                 0x1
                 0x0
-               0xf
-               0xf
+               0x10
+               0x10
                 1
                 0x80241d22
                 0x15050f08
@@ -28,8 +28,8 @@
                 0x2
                 0x1
                 0x0
-               0xf
-               0xf
+               0x10
+               0x10
                 1
                 0x80241d22
                 0x15050f08

Thanks,
- Kever

Quoted 103 lines · Kurt Miller

Re-testing with master as of Sep 12 and the wrong memory size continues to be detected (2G detected while the board has 4G).

The board has the following marking on it:

Rockpro64_V2.1 2018-07-02

RAM Chips:
PS052-053 BT
83RL

I'd be happy to test any proposed patches to correct the memory size detection on this board.

Quoted 75 lines · Kurt Miller

The board has 4G memory but only 2G is detected by TPL. Please let me know if additional information is needed.

With u-boot master TPL output:

U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Aug 28 2019 - 17:26:44) LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...

With rkbin rk3399_ddr_800MHz_v1.23.bin output:

DDR Version 1.23 20190709
In
channel 0
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB 256B stride
channel 0
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!

Quoted 8 lines

channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
OUT

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot

#3 lore raw
Quoted 33 lines · Kever Yang

Hi Kurt,

     Could you try with below update:

arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +0 -0
index 4a4414a960..dc9db047cb 100644
@@ -13,8 +13,8 @@

                 0x2
                 0x1
                 0x0
-               0xf
-               0xf
+               0x10
+               0x10
                 1
                 0x80241d22
                 0x15050f08

arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +0 -0
@@ -28,8 +28,8 @@

                 0x2
                 0x1
                 0x0
-               0xf
-               0xf
+               0x10
+               0x10
                 1
                 0x80241d22
                 0x15050f08

Quoted 2 lines

Thanks,
- Kever

Hi Kever,

Yes, that diff does correct the memory size detection for my board:

U-Boot TPL 2019.10-rc3-00332-ga314ec1bfd-dirty (Sep 17 2019 - 11:55:26) con reg
cru , cic , grf , sgrf , pmucru , pmu
Starting SDRAM initialization...
sdram_init: data trained for rank 1, ch 0
sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stride
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 400 mhz 0, 1
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 800 mhz 1, 0
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...

Thank you,
-Kurt

#4 lore raw
Quoted 54 lines · Kurt Miller
Quoted 34 lines · Kever Yang

Hi Kurt,

     Could you try with below update:

arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +0 -0
index 4a4414a960..dc9db047cb 100644
@@ -13,8 +13,8 @@

                 0x2
                 0x1
                 0x0
-               0xf
-               0xf
+               0x10
+               0x10
                 1
                 0x80241d22
                 0x15050f08

arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +0 -0
@@ -28,8 +28,8 @@

                 0x2
                 0x1
                 0x0
-               0xf
-               0xf
+               0x10
+               0x10
                 1
                 0x80241d22
                 0x15050f08

Quoted 2 lines

Thanks,
- Kever

Hi Kever,

Yes, that diff does correct the memory size detection for my board:

U-Boot TPL 2019.10-rc3-00332-ga314ec1bfd-dirty (Sep 17 2019 - 11:55:26) con reg
cru , cic , grf , sgrf , pmucru , pmu
Starting SDRAM initialization...
sdram_init: data trained for rank 1, ch 0
sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stride
lpddr4_set_ctl: channel 0 training pass

Quoted 8 lines

lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 400 mhz 0, 1
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 800 mhz 1, 0 Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...

Hi Kever,

Following up on this issue. I retested 2020.01-rc2 to see if memory size detection has been fixed yet. Without your diff above applied, 2020.01-rc2 still detects 2G memory instead of 4G:

U-Boot TPL 2020.01-rc2-dirty (Nov 13 2019 - 13:18:40)
con reg ffa80000 ffa80800 ffa82000 ffa84000 ffa88000 ffa88800 ffa8a000 ffa8c000 cru ff760000, cic ff620000, grf ff320000, sgrf ff330000, pmucru ff750000, pmu ff310000 Starting SDRAM initialization...
sdram_init: data trained for rank 1, ch 0
sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 400 mhz 0, 1
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 800 mhz 1, 0
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...

With your diff above applied I get 4G correctly:

U-Boot TPL 2020.01-rc2-dirty (Nov 13 2019 - 13:23:22)
con reg ffa80000 ffa80800 ffa82000 ffa84000 ffa88000 ffa88800 ffa8a000 ffa8c000 cru ff760000, cic ff620000, grf ff320000, sgrf ff330000, pmucru ff750000, pmu ff310000 Starting SDRAM initialization...
sdram_init: data trained for rank 1, ch 0
sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stride
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 400 mhz 0, 1
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 800 mhz 1, 0
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...

Regards,
-Kurt

#5 lore raw

[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】

Hi Kurt,

Quoted 62 lines · Kurt Miller
Quoted 53 lines · Kurt Miller
Quoted 33 lines · Kever Yang

Hi Kurt,

     Could you try with below update:

arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +4 -4
index 4a4414a960..dc9db047cb 100644
@@ -13,8 +13,8 @@
                  0x2
                  0x1
                  0x0
-               0xf
-               0xf
+               0x10
+               0x10
                  1
                  0x80241d22
                  0x15050f08
@@ -28,8 +28,8 @@
                  0x2
                  0x1
                  0x0
-               0xf
-               0xf
+               0x10
+               0x10
                  1
                  0x80241d22
                  0x15050f08
Quoted 2 lines

Thanks,
- Kever

Hi Kever,

Yes, that diff does correct the memory size detection for my board:

U-Boot TPL 2019.10-rc3-00332-ga314ec1bfd-dirty (Sep 17 2019 - 11:55:26) con reg
cru , cic , grf , sgrf , pmucru , pmu
Starting SDRAM initialization...
sdram_init: data trained for rank 1, ch 0
sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stride
lpddr4_set_ctl: channel 0 training pass

Quoted 8 lines

lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 400 mhz 0, 1
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 800 mhz 1, 0 Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...

Quoted 5 lines

Hi Kever,

Following up on this issue. I retested 2020.01-rc2 to see if memory size detection has been fixed yet. Without your diff above applied, 2020.01-rc2 still detects 2G memory instead of 4G:

Could you try with latest u-boot-rockchip?

https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip.git

Thanks,

- Kever

Quoted 48 lines

U-Boot TPL 2020.01-rc2-dirty (Nov 13 2019 - 13:18:40)
con reg ffa80000 ffa80800 ffa82000 ffa84000 ffa88000 ffa88800 ffa8a000 ffa8c000 cru ff760000, cic ff620000, grf ff320000, sgrf ff330000, pmucru ff750000, pmu ff310000 Starting SDRAM initialization...
sdram_init: data trained for rank 1, ch 0
sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 400 mhz 0, 1
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 800 mhz 1, 0
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...

With your diff above applied I get 4G correctly:

U-Boot TPL 2020.01-rc2-dirty (Nov 13 2019 - 13:23:22)
con reg ffa80000 ffa80800 ffa82000 ffa84000 ffa88000 ffa88800 ffa8a000 ffa8c000 cru ff760000, cic ff620000, grf ff320000, sgrf ff330000, pmucru ff750000, pmu ff310000 Starting SDRAM initialization...
sdram_init: data trained for rank 1, ch 0
sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stride
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 400 mhz 0, 1
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 800 mhz 1, 0
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...

Regards,
-Kurt

#6 lore raw

[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】

Hi Kever,

Quoted 70 lines · Kever Yang

Hi Kurt,

Quoted 67 lines · Kurt Miller
Quoted 55 lines · Kurt Miller
Quoted 34 lines · Kever Yang

Hi Kurt,

      Could you try with below update:

arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +0 -0
index 4a4414a960..dc9db047cb 100644
@@ -13,8 +13,8 @@

                  0x2
                  0x1
                  0x0
-               0xf
-               0xf
+               0x10
+               0x10
                  1
                  0x80241d22
                  0x15050f08

arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +0 -0
@@ -28,8 +28,8 @@

                  0x2
                  0x1
                  0x0
-               0xf
-               0xf
+               0x10
+               0x10
                  1
                  0x80241d22
                  0x15050f08

Quoted 2 lines

Thanks,
- Kever

Hi Kever,

Yes, that diff does correct the memory size detection for my board:

U-Boot TPL 2019.10-rc3-00332-ga314ec1bfd-dirty (Sep 17 2019 - 11:55:26) con reg
cru , cic , grf , sgrf , pmucru , pmu
Starting SDRAM initialization...
sdram_init: data trained for rank 1, ch 0
sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stride
lpddr4_set_ctl: channel 0 training pass

Quoted 8 lines

lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 400 mhz 0, 1
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 800 mhz 1, 0 Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...

Hi Kever,

Quoted 8 lines
Quoted 3 lines

Following up on this issue. I retested 2020.01-rc2 to see if memory size detection has been fixed yet. Without your diff above applied, 2020.01-rc2 still detects 2G memory instead of 4G:

Could you try with latest u-boot-rockchip?

https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip.git

The latest u-boot-rockchip does detect the correct memory size. I'll keep an eye out for the next rockchip pull to master occurs.

Thank you,
-Kurt

U-Boot TPL 2020.01-rc2-04834-g59b01eb7a1-dirty (Nov 18 2019 - 10:34:14) con reg ffa80000 ffa80800 ffa82000 ffa84000 ffa88000 ffa88800 ffa8a000 ffa8c000 cru ff760000, cic ff620000, grf ff320000, sgrf ff330000, pmucru ff750000, pmu ff310000 Starting SDRAM initialization...
sdram_init: data trained for rank 1, ch 0
sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
256B stride
256B stride
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_ctl: channel 0 training pass
lpddr4_set_ctl: channel 1 training pass
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2020.01-rc2-04834-g59b01eb7a1-dirty (Nov 18 2019 - 10:34:14 -0500) Trying to boot from MMC1
NOTICE:  BL31: v2.2(debug):2.2
NOTICE:  BL31: Built : 10:33:33, Nov 18 2019
INFO:    GICv3 with legacy support detected. ARM GICv3 driver initialized in EL3 INFO:    plat_rockchip_pmu_init(1605): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a53: CPU workaround for 855873 was applied INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2020.01-rc2-04834-g59b01eb7a1-dirty (Nov 18 2019 - 10:34:14 -0500)

Model: Pine64 RockPro64
DRAM:  rk3399_dmc_probe: pmugrf = 00000000ff320000
3.9 GiB
PMIC:  RK808
MMC:   dwmmc at fe320000: 1, sdhci at fe330000: 0
Loading Environment from MMC... Card did not respond to voltage select! *** Warning - No block device, using default environment

In:    serial at ff1a0000
Out:   serial at ff1a0000
Err:   serial at ff1a0000
Model: Pine64 RockPro64
rockchip_dnl_key_pressed: adc_channel_single_shot fail! Net:   eth0: ethernet at fe300000
Hit any key to stop autoboot:  0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found EFI removable media binary efi/boot/bootaa64.efi libfdt fdt_check_header(): FDT_ERR_BADMAGIC Scanning disk dwmmc at fe320000.blk...
** Unrecognized filesystem type **
Card did not respond to voltage select! Scanning disk sdhci at fe330000.blk...
Disk sdhci at fe330000.blk not ready
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
161090 bytes read in 16 ms (9.6 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
disks: sd0*

Quoted 1 line
Quoted 1 line

OpenBSD/arm64 BOOTAA64 0.19

boot>
booting sd0a:/bsd: 7480340+1599872+539984+848776 [621522+109+869160+526938]=0xd3fe68

#7 lore raw
In reply to Kurt Miller
Quoted 6 lines · Kurt Miller

The board has 4G memory but only 2G is detected by TPL. Please let me know if additional information is needed.

With u-boot master TPL output:

Quoted 8 lines

U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Aug 28 2019 - 17:26:44) LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot TPL 2019.10-rc3-00333-g5d07dd3f42-dirty (Sep 17 2019 - 14:52:32) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride
lpddr4_set_rate: change freq to 400 mhz 0, 1
lpddr4_set_rate: change freq to 800 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

Please check it I can able to detect 2GB each channel, so total 4GB.

#8 lore raw

[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】 detected

Hi Jagan,

    Seems like your and Kurt's board have different DRAM type:

- 16bit row + 1 CS

- 15bit row + 2 CS

Capacity detect function is missing for the driver now, and it's not able

to detect the correct size like Kurt is using.

Thanks,

- Kever

Quoted 30 lines · Jagan Teki
Quoted 5 lines · Kurt Miller

The board has 4G memory but only 2G is detected by TPL. Please let me know if additional information is needed.

With u-boot master TPL output:

Quoted 8 lines

U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Aug 28 2019 - 17:26:44) LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot TPL 2019.10-rc3-00333-g5d07dd3f42-dirty (Sep 17 2019 - 14:52:32) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride
lpddr4_set_rate: change freq to 400 mhz 0, 1
lpddr4_set_rate: change freq to 800 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

Please check it I can able to detect 2GB each channel, so total 4GB.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot

#9 lore raw

[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】 detected

Quoted 5 lines · Kever Yang

Hi Jagan,

Seems like your and Kurt's board have different DRAM type:

Quoted 7 lines

- 16bit row + 1 CS

- 15bit row + 2 CS

Capacity detect function is missing for the driver now, and it's not able

to detect the correct size like Kurt is using.

Got it. let me send the quick check patch, thanks.

#10 lore raw

[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】 detected

Hi Kever,

Quoted 9 lines · Jagan Teki
Quoted 7 lines · Kever Yang

Hi Jagan,

Seems like your and Kurt's board have different DRAM type:

- 16bit row + 1 CS

Quoted 7 lines
Quoted 5 lines

- 15bit row + 2 CS

Capacity detect function is missing for the driver now, and it's not able

to detect the correct size like Kurt is using.

Got it. let me send the quick check patch, thanks.

Are you looking to fix this for the release? if yes, then we can create another sdram*.dtsi for this specific dram board otherwise we can fix this MW. Adding cap detection would alter the existing behaviour of sdram driver, which indeed a risky to do at this point of time since we are close to release.

#11 lore raw

[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】 detected

Quoted 18 lines · Jagan Teki

Hi Kever,

Quoted 15 lines · Jagan Teki
Quoted 12 lines · Kever Yang

Hi Jagan,

     Seems like your and Kurt's board have different DRAM type:

- 16bit row + 1 CS

- 15bit row + 2 CS

Capacity detect function is missing for the driver now, and it's not able

Quoted 7 lines
Quoted 2 lines
Quoted 1 line

to detect the correct size like Kurt is using.

Got it. let me send the quick check patch, thanks.

Are you looking to fix this for the release? if yes, then we can create another sdram*.dtsi for this specific dram board otherwise we can fix this MW. Adding cap detection would alter the existing behaviour of sdram driver, which indeed a risky to do at this point of time since we are close to release.

Hi Kever, Jagen,

Is this being considered for fixing prior to release? My offer to test patches is still available.

Thank you,
-Kurt

#12 lore raw
In reply to Kurt Miller
Quoted 6 lines · Kurt Miller

The board has 4G memory but only 2G is detected by TPL. Please let me know if additional information is needed.

With u-boot master TPL output:

Quoted 8 lines

U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Aug 28 2019 - 17:26:44) LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...

So, even tired the same commit.

U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Sep 17 2019 - 15:01:07) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride
lpddr4_set_rate: change freq to 400 mhz 0, 1
lpddr4_set_rate: change freq to 800 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...