rockchip: rk3399: TPL: rockpro64: Wrong memory size detected
The board has 4G memory but only 2G is detected by TPL. Please let me know if additional information is needed.
With u-boot master TPL output:
U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Aug 28 2019 - 17:26:44) LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...
With rkbin rk3399_ddr_800MHz_v1.23.bin output:
DDR Version 1.23 20190709
In
channel 0
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB 256B stride
channel 0
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
OUT
Re-testing with master as of Sep 12 and the wrong memory size continues to be detected (2G detected while the board has 4G).
The board has the following marking on it:
Rockpro64_V2.1 2018-07-02
RAM Chips:
PS052-053 BT
83RL
I'd be happy to test any proposed patches to correct the memory size detection on this board.
Quoted 83 lines · Kurt Miller
The board has 4G memory but only 2G is detected by TPL. Please let me know if additional information is needed.
With u-boot master TPL output:
U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Aug 28 2019 - 17:26:44) LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...With rkbin rk3399_ddr_800MHz_v1.23.bin output:
DDR Version 1.23 20190709
In
channel 0
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB 256B stride
channel 0
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig =0x101, ddrsize =0x40
ch 1 ddrconfig =0x101, ddrsize =0x40
pmugrf_os_reg[2] =0x32C1F2C1, stride =0xD
OUT
[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】 detected
Hi Kurt,
Could you try with below update:
(quoted diff) +0 -0
b/arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi
index 4a4414a960..dc9db047cb 100644
arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +4 -4
@@ -13,8 +13,8 @@ 0x2 0x1 0x0 - 0xf - 0xf + 0x10 + 0x10 1 0x80241d22 0x15050f08
@@ -28,8 +28,8 @@ 0x2 0x1 0x0 - 0xf - 0xf + 0x10 + 0x10 1 0x80241d22 0x15050f08
Thanks,
- Kever
Quoted 103 lines · Kurt Miller
Re-testing with master as of Sep 12 and the wrong memory size continues to be detected (2G detected while the board has 4G).
The board has the following marking on it:
Rockpro64_V2.1 2018-07-02
RAM Chips:
PS052-053 BT
83RLI'd be happy to test any proposed patches to correct the memory size detection on this board.
Quoted 75 lines · Kurt Miller
The board has 4G memory but only 2G is detected by TPL. Please let me know if additional information is needed.
With u-boot master TPL output:
U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Aug 28 2019 - 17:26:44) LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...With rkbin rk3399_ddr_800MHz_v1.23.bin output:
DDR Version 1.23 20190709
In
channel 0
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB 256B stride
channel 0
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0xB8
MR4=0x2
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!Quoted 8 lines
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig =0x101, ddrsize =0x40
ch 1 ddrconfig =0x101, ddrsize =0x40
pmugrf_os_reg[2] =0x32C1F2C1, stride =0xD
OUT_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
Quoted 6 lines · Kurt Miller
The board has 4G memory but only 2G is detected by TPL. Please let me know if additional information is needed.
With u-boot master TPL output:
Quoted 8 lines
U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Aug 28 2019 - 17:26:44) LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot TPL 2019.10-rc3-00333-g5d07dd3f42-dirty (Sep 17 2019 - 14:52:32) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400 mhz 0, 1lpddr4_set_rate: change freq to 800 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
Please check it I can able to detect 2GB each channel, so total 4GB.
Quoted 6 lines · Kurt Miller
The board has 4G memory but only 2G is detected by TPL. Please let me know if additional information is needed.
With u-boot master TPL output:
Quoted 8 lines
U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Aug 28 2019 - 17:26:44) LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...
So, even tired the same commit.
U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Sep 17 2019 - 15:01:07) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400 mhz 0, 1lpddr4_set_rate: change freq to 800 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
Quoted 33 lines · Kever Yang
Hi Kurt,
Could you try with below update:
arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +0
-0@@ -13,8 +13,8 @@
0x2
0x1
0x0
-0xf
-0xf
+0x10
+0x10
1
0x80241d22
0x15050f08arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +0
-0@@ -28,8 +28,8 @@
0x2
0x1
0x0
-0xf
-0xf
+0x10
+0x10
1
0x80241d22
0x15050f08
Quoted 2 lines
Thanks,
- Kever
Hi Kever,
Yes, that diff does correct the memory size detection for my board:
U-Boot TPL 2019.10-rc3-00332-ga314ec1bfd-dirty (Sep 17 2019 - 11:55:26) con reg
cru , cic , grf , sgrf , pmucru , pmu
Starting SDRAM initialization...sdram_init: data trained for rank 1, ch 0sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stridelpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 400 mhz 0, 1lpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 800 mhz 1, 0
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...
Thank you,
-Kurt
[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】 detected
In reply to Jagan TekiHi Jagan,
Seems like your and Kurt's board have different DRAM type:
- 16bit row + 1 CS
- 15bit row + 2 CS
Capacity detect function is missing for the driver now, and it's not able
to detect the correct size like Kurt is using.
Thanks,
- Kever
Quoted 30 lines · Jagan Teki
Quoted 5 lines · Kurt Miller
The board has 4G memory but only 2G is detected by TPL. Please let me know if additional information is needed.
With u-boot master TPL output:
Quoted 8 lines
U-Boot TPL 2019.10-rc3-00020-ge4b8dd9b34-dirty (Aug 28 2019 - 17:26:44) LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...U-Boot TPL 2019.10-rc3-00333-g5d07dd3f42-dirty (Sep 17 2019 - 14:52:32) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400 mhz 0, 1lpddr4_set_rate: change freq to 800 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...Please check it I can able to detect 2GB each channel, so total 4GB.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】 detected
Quoted 5 lines · Kever Yang
Hi Jagan,
Seems like your and Kurt's board have different DRAM type:
Quoted 7 lines
- 16bit row + 1 CS
- 15bit row + 2 CS
Capacity detect function is missing for the driver now, and it's not able
to detect the correct size like Kurt is using.
Got it. let me send the quick check patch, thanks.
[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】 detected
Hi Kever,
Quoted 9 lines · Jagan Teki
Quoted 7 lines · Kever Yang
Hi Jagan,
Seems like your and Kurt's board have different DRAM type:
- 16bit row + 1 CS
Quoted 7 lines
Quoted 5 lines
- 15bit row + 2 CS
Capacity detect function is missing for the driver now, and it's not able
to detect the correct size like Kurt is using.
Got it. let me send the quick check patch, thanks.
Are you looking to fix this for the release? if yes, then we can create another sdram*.dtsi for this specific dram board otherwise we can fix this MW. Adding cap detection would alter the existing behaviour of sdram driver, which indeed a risky to do at this point of time since we are close to release.
[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】 detected
Quoted 18 lines · Jagan Teki
Hi Kever,
Quoted 15 lines · Jagan Teki
Quoted 12 lines · Kever Yang
Hi Jagan,
Seems like your and Kurt's board have different DRAM type:
- 16bit row + 1 CS
- 15bit row + 2 CS
Capacity detect function is missing for the driver now, and it's not able
Quoted 7 lines
Quoted 2 lines
Quoted 1 line
to detect the correct size like Kurt is using.
Got it. let me send the quick check patch, thanks.
Are you looking to fix this for the release? if yes, then we can create another sdram*.dtsi for this specific dram board otherwise we can fix this MW. Adding cap detection would alter the existing behaviour of sdram driver, which indeed a risky to do at this point of time since we are close to release.
Hi Kever, Jagen,
Is this being considered for fixing prior to release? My offer to test patches is still available.
Thank you,
-Kurt
Quoted 54 lines · Kurt Miller
Quoted 34 lines · Kever Yang
Hi Kurt,
Could you try with below update:
arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +0
-0@@ -13,8 +13,8 @@
0x2
0x1
0x0
-0xf
-0xf
+0x10
+0x10
1
0x80241d22
0x15050f08arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +0
-0@@ -28,8 +28,8 @@
0x2
0x1
0x0
-0xf
-0xf
+0x10
+0x10
1
0x80241d22
0x15050f08Quoted 2 lines
Thanks,
- KeverHi Kever,
Yes, that diff does correct the memory size detection for my board:
U-Boot TPL 2019.10-rc3-00332-ga314ec1bfd-dirty (Sep 17 2019 - 11:55:26) con reg
cru , cic , grf , sgrf , pmucru , pmu
Starting SDRAM initialization...sdram_init: data trained for rank 1, ch 0sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stridelpddr4_set_ctl: channel 0 training pass
Quoted 8 lines
lpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 400 mhz 0, 1lpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 800 mhz 1, 0 Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...
Hi Kever,
Following up on this issue. I retested 2020.01-rc2 to see if memory size detection has been fixed yet. Without your diff above applied, 2020.01-rc2 still detects 2G memory instead of 4G:
U-Boot TPL 2020.01-rc2-dirty (Nov 13 2019 - 13:18:40)
con reg ffa80000 ffa80800 ffa82000 ffa84000 ffa88000 ffa88800 ffa8a000 ffa8c000 cru ff760000, cic ff620000, grf ff320000, sgrf ff330000, pmucru ff750000, pmu ff310000 Starting SDRAM initialization...sdram_init: data trained for rank 1, ch 0sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stridelpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 400 mhz 0, 1lpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 800 mhz 1, 0
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...
With your diff above applied I get 4G correctly:
U-Boot TPL 2020.01-rc2-dirty (Nov 13 2019 - 13:23:22)
con reg ffa80000 ffa80800 ffa82000 ffa84000 ffa88000 ffa88800 ffa8a000 ffa8c000 cru ff760000, cic ff620000, grf ff320000, sgrf ff330000, pmucru ff750000, pmu ff310000 Starting SDRAM initialization...sdram_init: data trained for rank 1, ch 0sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stridelpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 400 mhz 0, 1lpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 800 mhz 1, 0
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...
Regards,
-Kurt
[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】
Hi Kurt,
Quoted 62 lines · Kurt Miller
Quoted 53 lines · Kurt Miller
Quoted 33 lines · Kever Yang
Hi Kurt,
Could you try with below update:
arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +4
-4@@ -13,8 +13,8 @@ 0x2 0x1 0x0 - 0xf - 0xf + 0x10 + 0x10 1 0x80241d22 0x15050f08@@ -28,8 +28,8 @@ 0x2 0x1 0x0 - 0xf - 0xf + 0x10 + 0x10 1 0x80241d22 0x15050f08Quoted 2 lines
Thanks,
- KeverHi Kever,
Yes, that diff does correct the memory size detection for my board:
U-Boot TPL 2019.10-rc3-00332-ga314ec1bfd-dirty (Sep 17 2019 - 11:55:26) con reg
cru , cic , grf , sgrf , pmucru , pmu
Starting SDRAM initialization...sdram_init: data trained for rank 1, ch 0sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stridelpddr4_set_ctl: channel 0 training passQuoted 8 lines
lpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 400 mhz 0, 1lpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 800 mhz 1, 0 Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...
Quoted 5 lines
Hi Kever,
Following up on this issue. I retested 2020.01-rc2 to see if memory size detection has been fixed yet. Without your diff above applied, 2020.01-rc2 still detects 2G memory instead of 4G:
Could you try with latest u-boot-rockchip?
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip.git
Thanks,
- Kever
Quoted 48 lines
U-Boot TPL 2020.01-rc2-dirty (Nov 13 2019 - 13:18:40)
con regffa80000ffa80800ffa82000ffa84000ffa88000ffa88800ffa8a000ffa8c000cruff760000, cicff620000, grfff320000, sgrfff330000, pmucruff750000, pmuff310000Starting SDRAM initialization...sdram_init: data trained for rank 1, ch 0sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stridelpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 400 mhz 0, 1lpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 800 mhz 1, 0
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...With your diff above applied I get 4G correctly:
U-Boot TPL 2020.01-rc2-dirty (Nov 13 2019 - 13:23:22)
con regffa80000ffa80800ffa82000ffa84000ffa88000ffa88800ffa8a000ffa8c000cruff760000, cicff620000, grfff320000, sgrfff330000, pmucruff750000, pmuff310000Starting SDRAM initialization...sdram_init: data trained for rank 1, ch 0sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stridelpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 400 mhz 0, 1lpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 800 mhz 1, 0
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...Regards,
-Kurt
[U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意,邮件由[email protected]代发】
Hi Kever,
Quoted 70 lines · Kever Yang
Hi Kurt,
Quoted 67 lines · Kurt Miller
Quoted 55 lines · Kurt Miller
Quoted 34 lines · Kever Yang
Hi Kurt,
Could you try with below update:
arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +0
-0@@ -13,8 +13,8 @@
0x2
0x1
0x0
-0xf
-0xf
+0x10
+0x10
1
0x80241d22
0x15050f08arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi +0
-0@@ -28,8 +28,8 @@
0x2
0x1
0x0
-0xf
-0xf
+0x10
+0x10
1
0x80241d22
0x15050f08Quoted 2 lines
Thanks,
- KeverHi Kever,
Yes, that diff does correct the memory size detection for my board:
U-Boot TPL 2019.10-rc3-00332-ga314ec1bfd-dirty (Sep 17 2019 - 11:55:26) con reg
cru , cic , grf , sgrf , pmucru , pmu
Starting SDRAM initialization...sdram_init: data trained for rank 1, ch 0sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stridelpddr4_set_ctl: channel 0 training passQuoted 8 lines
lpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 400 mhz 0, 1lpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 800 mhz 1, 0 Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...Hi Kever,
Quoted 8 lines
Quoted 3 lines
Following up on this issue. I retested 2020.01-rc2 to see if memory size detection has been fixed yet. Without your diff above applied, 2020.01-rc2 still detects 2G memory instead of 4G:
Could you try with latest u-boot-rockchip?
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip.git
The latest u-boot-rockchip does detect the correct memory size. I'll keep an eye out for the next rockchip pull to master occurs.
Thank you,
-Kurt
U-Boot TPL 2020.01-rc2-04834-g59b01eb7a1-dirty (Nov 18 2019 - 10:34:14) con reg ffa80000 ffa80800 ffa82000 ffa84000 ffa88000 ffa88800 ffa8a000 ffa8c000 cru ff760000, cic ff620000, grf ff320000, sgrf ff330000, pmucru ff750000, pmu ff310000 Starting SDRAM initialization...sdram_init: data trained for rank 1, ch 0sdram_init: data trained for rank 1, ch 1
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
256B stride
256B stridelpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_ctl: channel 0 training passlpddr4_set_ctl: channel 1 training passlpddr4_set_rate: change freq to 800000000 mhz 1, 0
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2020.01-rc2-04834-g59b01eb7a1-dirty (Nov 18 2019 - 10:34:14 -0500) Trying to boot from MMC1
NOTICE: BL31: v2.2(debug):2.2
NOTICE: BL31: Built : 10:33:33, Nov 18 2019
INFO: GICv3 with legacy support detected. ARM GICv3 driver initialized in EL3 INFO: plat_rockchip_pmu_init(1605): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2020.01-rc2-04834-g59b01eb7a1-dirty (Nov 18 2019 - 10:34:14 -0500)
Model: Pine64 RockPro64
DRAM: rk3399_dmc_probe: pmugrf = 00000000ff320000
3.9 GiB
PMIC: RK808
MMC: dwmmc at fe320000: 1, sdhci at fe330000: 0
Loading Environment from MMC... Card did not respond to voltage select! *** Warning - No block device, using default environment
In: serial at ff1a0000
Out: serial at ff1a0000
Err: serial at ff1a0000
Model: Pine64 RockPro64rockchip_dnl_key_pressed: adc_channel_single_shot fail! Net: eth0: ethernet at fe300000
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found EFI removable media binary efi/boot/bootaa64.efi libfdt fdt_check_header(): FDT_ERR_BADMAGIC Scanning disk dwmmc at fe320000.blk...
** Unrecognized filesystem type **
Card did not respond to voltage select! Scanning disk sdhci at fe330000.blk...
Disk sdhci at fe330000.blk not ready
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
161090 bytes read in 16 ms (9.6 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
disks: sd0*
Quoted 1 line
Quoted 1 line
OpenBSD/arm64 BOOTAA64 0.19
boot>
booting sd0a:/bsd: 7480340+1599872+539984+848776 [621522+109+869160+526938]=0xd3fe68