Skip to contentSkip to conversation

riscv: Set xPIE to 1 after xRET

PATCH In review Yiting Wang 3 participants 3 messages Jan 3, 2020 RISC-V

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 riscv: Set xPIE to 1 after xRET

When executing an xRET instruction, supposing xPP holds the value y, xIE is set to xPIE; the privilege mode is changed to y; xPIE is set to 1. But QEMU sets xPIE to 0 incorrectly.

---
 target/riscv/op_helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
target/riscv/op_helper.c +2 -2
index 331cc36..e87c911 100644
@@ -93,7 +93,7 @@ target_ulong helper_sret(CPURISCVState *env, target_ulong cpu_pc_deb)
         env->priv_ver >= PRIV_VERSION_1_10_0 ?
         MSTATUS_SIE : MSTATUS_UIE << prev_priv,
         get_field(mstatus, MSTATUS_SPIE));
-    mstatus = set_field(mstatus, MSTATUS_SPIE, 0);
+    mstatus = set_field(mstatus, MSTATUS_SPIE, 1);
     mstatus = set_field(mstatus, MSTATUS_SPP, PRV_U);
     riscv_cpu_set_mode(env, prev_priv);
     env->mstatus = mstatus;
@@ -118,7 +118,7 @@ target_ulong helper_mret(CPURISCVState *env, target_ulong cpu_pc_deb)
         env->priv_ver >= PRIV_VERSION_1_10_0 ?
         MSTATUS_MIE : MSTATUS_UIE << prev_priv,
         get_field(mstatus, MSTATUS_MPIE));
-    mstatus = set_field(mstatus, MSTATUS_MPIE, 0);
+    mstatus = set_field(mstatus, MSTATUS_MPIE, 1);
     mstatus = set_field(mstatus, MSTATUS_MPP, PRV_U);
     riscv_cpu_set_mode(env, prev_priv);
     env->mstatus = mstatus;
Signature · 1 line
2.7.4
Reviewed-by on v1 1/1
#2 lore raw
In reply to Yiting Wang
Quoted 6 lines · Yiting Wang

When executing an xRET instruction, supposing xPP holds the value y, xIE is set to xPIE; the privilege mode is changed to y; xPIE is set to 1. But QEMU sets xPIE to 0 incorrectly.

Alistair

Quoted 30 lines
---
 target/riscv/op_helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
target/riscv/op_helper.c +2 -3
index 331cc36..e87c911 100644
@@ -93,7 +93,7 @@ target_ulong helper_sret(CPURISCVState *env, target_ulong cpu_pc_deb)
         env->priv_ver >= PRIV_VERSION_1_10_0 ?
         MSTATUS_SIE : MSTATUS_UIE << prev_priv,
         get_field(mstatus, MSTATUS_SPIE));
-    mstatus = set_field(mstatus, MSTATUS_SPIE, 0);
+    mstatus = set_field(mstatus, MSTATUS_SPIE, 1);
     mstatus = set_field(mstatus, MSTATUS_SPP, PRV_U);
     riscv_cpu_set_mode(env, prev_priv);
     env->mstatus = mstatus;
@@ -118,7 +118,7 @@ target_ulong helper_mret(CPURISCVState *env, target_ulong cpu_pc_deb)
         env->priv_ver >= PRIV_VERSION_1_10_0 ?
         MSTATUS_MIE : MSTATUS_UIE << prev_priv,
         get_field(mstatus, MSTATUS_MPIE));
-    mstatus = set_field(mstatus, MSTATUS_MPIE, 0);
+    mstatus = set_field(mstatus, MSTATUS_MPIE, 1);
     mstatus = set_field(mstatus, MSTATUS_MPP, PRV_U);
     riscv_cpu_set_mode(env, prev_priv);
     env->mstatus = mstatus;
--

2.7.4