Actions S700 SoC support
Subsystems (6)
v7 cover Actions S700 SoC support
This adds Cubieboard7[1] support based on Action Semi's S700 SoC[2], It's Quad-core ARMv8 SoC with Cortex-A53 cores. Peripheral like UART seems to be compatible with S900 SoC(basic support for it is alreay present in u-boot).
This Series(v7) fixes a serious Bug that breaks S900, it was there since v5.Thanks to Andre for pointing it out.
Series(v6)[3] does following changes:
* [PATCH v5 06/11] becomes [PATCH v6 03/11]
* [PATCH v5 03/11] becomes [PATCH v6 04/11]
* Introduce a new patch to move defconfig options to Kconfig which is [PATCH v6 10/12]
Series(v5)[4] just re-orders the patches so that U-BOOT(with bubblegum96_defconfig) builds after every patch of the series(suggested by Andre).
S700 support is tested[5] on Cubieboard7 board and S900 support is just compiled tested.
This patch series can be tested using below tree:
https://github.com/Atomar25/u-boot/commits/s700_v7
[1]: http://www.cubietech.com/product-detail/cubieboard7/
[2]: http://www.actions-semi.com/en/productview.aspx?id=225
[3]: http://u-boot.10912.n7.nabble.com/PATCH-v6-00-12-Actions-S700-SoC-support-td403562.html#a403567
[4]: http://u-boot.10912.n7.nabble.com/PATCH-v5-00-11-Actions-S700-SoC-support-td402752.html#a402762
[5]: https://paste.ubuntu.com/p/w2FvzmZBcS/
Amit Singh Tomar (12):
arm: actions: Add common framework for Actions Owl Semi SoCs
arm: actions: rename sysmap-s900 to sysmap-owl
serial: actions: add compatible string
arm: dts: sync dts for Action Semi S900
arm: dts: actions: s900: add u-boot specific dtsi file
clk: actions: Add common clock driver
arm: actions: add S700 SoC device tree
arm: dts: actions: s700: add u-boot specific dtsi file
arm: add support Actions Semi S700
actions: Move defconfig options to Kconfig
arm: add Cubieboard7 board support
doc: boards: add Cubieboard7 documentation
MAINTAINERS | 2 + arch/arm/Kconfig | 5 +- arch/arm/dts/Makefile | 6 +- arch/arm/dts/s700-cubieboard7.dts | 92 +++++++ arch/arm/dts/s700-u-boot.dtsi | 18 ++ arch/arm/dts/s700.dtsi | 248 +++++++++++++++++++ arch/arm/dts/s900-u-boot.dtsi | 17 ++ arch/arm/dts/s900.dtsi | 322 +++++++++++++++++++++++-- arch/arm/include/asm/arch-owl/clk_s900.h | 57 ----- arch/arm/include/asm/arch-owl/regs_s700.h | 56 +++++ arch/arm/mach-owl/Kconfig | 50 ++-- arch/arm/mach-owl/Makefile | 3 +- arch/arm/mach-owl/soc.c | 57 +++++ arch/arm/mach-owl/sysmap-owl.c | 32 +++ arch/arm/mach-owl/sysmap-s900.c | 32 --- board/ucRobotics/bubblegum_96/Kconfig | 15 -- board/ucRobotics/bubblegum_96/MAINTAINERS | 6 - board/ucRobotics/bubblegum_96/Makefile | 3 - board/ucRobotics/bubblegum_96/bubblegum_96.c | 57 ----- configs/bubblegum_96_defconfig | 12 +- configs/cubieboard7_defconfig | 9 + doc/board/actions/cubieboard7.rst | 115 +++++++++ doc/board/actions/index.rst | 10 + doc/board/index.rst | 1 + drivers/clk/owl/Kconfig | 8 +- drivers/clk/owl/Makefile | 2 +- drivers/clk/owl/clk_owl.c | 153 ++++++++++++ drivers/clk/owl/clk_owl.h | 65 +++++ drivers/clk/owl/clk_s900.c | 137 ----------- drivers/serial/serial_owl.c | 2 +- include/configs/bubblegum_96.h | 40 --- include/configs/owl-common.h | 40 +++ include/configs/s700.h | 13 + include/configs/s900.h | 16 ++ include/dt-bindings/clock/actions,s700-cmu.h | 118 +++++++++ include/dt-bindings/clock/actions,s900-cmu.h | 129 ++++++++++ include/dt-bindings/clock/s900_cmu.h | 77 ------ include/dt-bindings/reset/actions,s700-reset.h | 34 +++ include/dt-bindings/reset/actions,s900-reset.h | 65 +++++ 39 files changed, 1638 insertions(+), 486 deletions(-) create mode 100644 arch/arm/dts/s700-cubieboard7.dts create mode 100644 arch/arm/dts/s700-u-boot.dtsi create mode 100644 arch/arm/dts/s700.dtsi create mode 100644 arch/arm/dts/s900-u-boot.dtsi delete mode 100644 arch/arm/include/asm/arch-owl/clk_s900.h create mode 100644 arch/arm/include/asm/arch-owl/regs_s700.h create mode 100644 arch/arm/mach-owl/soc.c create mode 100644 arch/arm/mach-owl/sysmap-owl.c delete mode 100644 arch/arm/mach-owl/sysmap-s900.c delete mode 100644 board/ucRobotics/bubblegum_96/Kconfig delete mode 100644 board/ucRobotics/bubblegum_96/MAINTAINERS delete mode 100644 board/ucRobotics/bubblegum_96/Makefile delete mode 100644 board/ucRobotics/bubblegum_96/bubblegum_96.c create mode 100644 configs/cubieboard7_defconfig create mode 100644 doc/board/actions/cubieboard7.rst create mode 100644 doc/board/actions/index.rst create mode 100644 drivers/clk/owl/clk_owl.c create mode 100644 drivers/clk/owl/clk_owl.h delete mode 100644 drivers/clk/owl/clk_s900.c delete mode 100644 include/configs/bubblegum_96.h create mode 100644 include/configs/owl-common.h create mode 100644 include/configs/s700.h create mode 100644 include/configs/s900.h create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h create mode 100644 include/dt-bindings/clock/actions,s900-cmu.h delete mode 100644 include/dt-bindings/clock/s900_cmu.h create mode 100644 include/dt-bindings/reset/actions,s700-reset.h create mode 100644 include/dt-bindings/reset/actions,s900-reset.h
Signature · 1 line
2.7.4
PATCH v7 1/12 arm: actions: Add common framework for Actions Owl Semi SoCs
This commit adds common arch support for Actions Semi Owl series SoCs and removes the Bubblegum96 board files.
---
Changes since v6:
* No change.
Changes since v5:
* No change.
Changes since v4:
* No change.
Changes since v3:
* Corrected the file list entry in MAINTAINERS file.
Changes since v2:
* Moved the file list details to root MAINTAINERS file.
* Updated the commit message as suggested by Mani.
* Used the "Owl" keyword to describe SoC family.
Changes since v1:
* Moved S700 specific changes to patch 4 of 9.
* Moved couple of symbols from defconfig to arch/arm/Kconfig and platform owl Kconfig.
--- MAINTAINERS | 2 + arch/arm/Kconfig | 3 +- arch/arm/mach-owl/Kconfig | 29 ++++++-------- arch/arm/mach-owl/Makefile | 1 + arch/arm/mach-owl/soc.c | 57 ++++++++++++++++++++++++++++ board/ucRobotics/bubblegum_96/Kconfig | 15 -------- board/ucRobotics/bubblegum_96/MAINTAINERS | 6 --- board/ucRobotics/bubblegum_96/Makefile | 3 -- board/ucRobotics/bubblegum_96/bubblegum_96.c | 57 ---------------------------- configs/bubblegum_96_defconfig | 4 +- include/configs/bubblegum_96.h | 40 ------------------- include/configs/owl-common.h | 40 +++++++++++++++++++ include/configs/s900.h | 16 ++++++++ 13 files changed, 130 insertions(+), 143 deletions(-) create mode 100644 arch/arm/mach-owl/soc.c delete mode 100644 board/ucRobotics/bubblegum_96/Kconfig delete mode 100644 board/ucRobotics/bubblegum_96/MAINTAINERS delete mode 100644 board/ucRobotics/bubblegum_96/Makefile delete mode 100644 board/ucRobotics/bubblegum_96/bubblegum_96.c delete mode 100644 include/configs/bubblegum_96.h create mode 100644 include/configs/owl-common.h create mode 100644 include/configs/s900.h
MAINTAINERS +2 -0
@@ -275,6 +275,8 @@ F: arch/arm/mach-owl/ F: board/ucRobotics/ F: drivers/clk/owl/ F: drivers/serial/serial_owl.c +F: include/configs/owl-common.h +F: configs/bubblegum_96_defconfig ARM RENESAS RMOBILE/R-CAR M: Nobuhiro Iwamatsu <[email protected]>
arch/arm/Kconfig +1 -2
@@ -873,9 +873,9 @@ config ARCH_MX5 config ARCH_OWL bool "Actions Semi OWL SoCs" - select ARM64 select DM select DM_SERIAL + select OWL_SERIAL select OF_CONTROL imply CMD_DM
@@ -1865,7 +1865,6 @@ source "board/spear/spear600/Kconfig" source "board/spear/x600/Kconfig" source "board/st/stv0991/Kconfig" source "board/tcl/sl50/Kconfig" -source "board/ucRobotics/bubblegum_96/Kconfig" source "board/birdland/bav335x/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/variscite/dart_6ul/Kconfig"
arch/arm/mach-owl/Kconfig +12 -17
@@ -1,27 +1,22 @@ if ARCH_OWL -config SYS_SOC - default "owl" - choice - prompt "Actions Semi OWL SoCs board select" + prompt "Actions Semi Owl SoC Variant" optional -config TARGET_BUBBLEGUM_96 - bool "96Boards Bubblegum-96" - help - Support for 96Boards Bubblegum-96. This board complies with - 96Board Consumer Edition Specification. Features: - - Actions Semi S900 SoC (4xCortex A53, Power VR G6230 GPU) - - 2GiB RAM - - 8GiB eMMC, uSD slot - - WiFi, Bluetooth and GPS module - - 2x Host, 1x Device USB port - - HDMI - - 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons +config MACH_S900 + bool "Actions Semi S900 SoC" + select ARM64 endchoice -source "board/ucRobotics/bubblegum_96/Kconfig" +config SYS_TEXT_BASE + default 0x11000000 + +config SYS_CONFIG_NAME + default "s900" if MACH_S900 + +config SYS_SOC + default "s900" if MACH_S900 endif
arch/arm/mach-owl/Makefile +1 -0
@@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0+ +obj-y += soc.o obj-y += sysmap-s900.o
arch/arm/mach-owl/soc.c new file +57 -0
57 lines not on this page · raw message
board/ucRobotics/bubblegum_96/Kconfig deleted +0 -15
@@ -1,15 +0,0 @@ -if TARGET_BUBBLEGUM_96 - -config SYS_BOARD - default "bubblegum_96" - -config SYS_VENDOR - default "ucRobotics" - -config SYS_SOC - default "s900" - -config SYS_CONFIG_NAME - default "bubblegum_96" - -endif
board/ucRobotics/bubblegum_96/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -BUBBLEGUM_96 BOARD -M: Manivannan Sadhasivam <[email protected]> -S: Maintained -F: board/ucRobotics/bubblegum_96/ -F: include/configs/bubblegum_96.h -F: configs/bubblegum_96_defconfig
board/ucRobotics/bubblegum_96/Makefile deleted +0 -3
@@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -obj-y := bubblegum_96.o
board/ucRobotics/bubblegum_96/bubblegum_96.c deleted +0 -57
57 lines not on this page · raw message
configs/bubblegum_96_defconfig +1 -3
@@ -1,9 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_OWL=y -CONFIG_SYS_TEXT_BASE=0x11000000 CONFIG_ENV_SIZE=0x2000 -CONFIG_TARGET_BUBBLEGUM_96=y CONFIG_NR_DRAM_BANKS=1 +CONFIG_MACH_S900=y CONFIG_IDENT_STRING="\nBubblegum-96" CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=5
@@ -21,4 +20,3 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_CLK=y CONFIG_CLK_OWL=y CONFIG_CLK_S900=y -CONFIG_OWL_SERIAL=y
include/configs/bubblegum_96.h deleted +0 -40
@@ -1,40 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Board configuration file for Bubblegum-96 -* -* Copyright (C) 2015 Actions Semi Co., Ltd. -* Copyright (C) 2018 Manivannan Sadhasivam <[email protected]> -* -*/ - -#ifndef _BUBBLEGUM_96_H_ -#define _BUGGLEGUM_96_H_ - -/* SDRAM Definitions */ -#define CONFIG_SYS_SDRAM_BASE 0x0 -#define CONFIG_SYS_SDRAM_SIZE 0x80000000 - -/* Generic Timer Definitions */ -#define COUNTER_FREQUENCY (24000000)/* 24MHz */ - -#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024) - -/* Some commands use this as the default load address */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7ffc0) - -/* -* This is the initial SP which is used only briefly for relocating the u-boot -* image to the top of SDRAM. After relocation u-boot moves the stack to the -* proper place. -*/ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x7ff00) - -/* UART Definitions */ -#define CONFIG_BAUDRATE 115200 - -/* Console configuration */ -#define CONFIG_SYS_CBSIZE 1024/* Console buffer size */ -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#endif
include/configs/owl-common.h new file +40 -0
@@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Board configuration file for Actions Semi Owl SoCs. +* +* Copyright (C) 2015 Actions Semi Co., Ltd. +* Copyright (C) 2018 Manivannan Sadhasivam <[email protected]> +* +*/ + +#ifndef _OWL_COMMON_CONFIG_H_ +#define _OWL_COMMON_CONFIG_H_ + +/* SDRAM Definitions */ +#define CONFIG_SYS_SDRAM_BASE 0x0 +#define CONFIG_SYS_SDRAM_SIZE 0x80000000 + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY (24000000)/* 24MHz */ + +#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024) + +/* Some commands use this as the default load address */ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7ffc0) + +/* +* This is the initial SP which is used only briefly for relocating the u-boot +* image to the top of SDRAM. After relocation u-boot moves the stack to the +* proper place. +*/ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x7ff00) + +/* UART Definitions */ +#define CONFIG_BAUDRATE 115200 + +/* Console configuration */ +#define CONFIG_SYS_CBSIZE 1024/* Console buffer size */ +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#endif
include/configs/s900.h new file +16 -0
@@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2015 Actions Semi Co., Ltd. +* Copyright (C) 2018 Manivannan Sadhasivam <[email protected]> +* +*/ + +#ifndef _CONFIG_S900_H_ +#define _CONFIG_S900_H_ + +/* +* Include common owl configuration where most the settings are +*/ +#include <configs/owl-common.h> + +#endif
Signature · 1 line
2.7.4
PATCH v7 2/12 arm: actions: rename sysmap-s900 to sysmap-owl
In reply to Amit Singh TomarNow that memory maps(for both S700 and S900 SoCs) can be managed using a common file, rename sysmap-s900 to sysmap-owl to reflect the same.
---
Changes since v6:
* No changes.
Changes since v5:
* No changes.
Changes since v4:
* No changes.
Changes since v3:
* Added reviewed-by tag.
Changes since v2:
* Fixed the commit message and header.
Changes since v1:
* compile sysmap-owl.c against CONFIG_ARM64 now.
--- arch/arm/mach-owl/Makefile | 2 +- arch/arm/mach-owl/sysmap-owl.c | 32 ++++++++++++++++++++++++++++++++ arch/arm/mach-owl/sysmap-s900.c | 32 -------------------------------- 3 files changed, 33 insertions(+), 33 deletions(-) create mode 100644 arch/arm/mach-owl/sysmap-owl.c delete mode 100644 arch/arm/mach-owl/sysmap-s900.c
arch/arm/mach-owl/Makefile +1 -1
@@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0+ obj-y += soc.o -obj-y += sysmap-s900.o +obj-$(CONFIG_ARM64) += sysmap-owl.o
arch/arm/mach-owl/sysmap-owl.c new file +32 -0
@@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Memory map for Actions Semi Owl series SoCs. +* +* Copyright (C) 2015 Actions Semi Co., Ltd. +* Copyright (C) 2018 Manivannan Sadhasivam <[email protected]> +*/ + +#include <common.h> +#include <asm/armv8/mmu.h> + +static struct mm_region owl_mem_map[] = { + { + .virt =0x0UL ,/* DDR */ + .phys =0x0UL ,/* DDR */ + .size =0x80000000UL , + .attrs =PTE_BLOCK_MEMTYPE (MT_NORMAL ) | +PTE_BLOCK_INNER_SHARE + }, { + .virt =0xE0000000UL ,/* Peripheral block */ + .phys =0xE0000000UL ,/* Peripheral block */ + .size =0x08000000UL , + .attrs =PTE_BLOCK_MEMTYPE (MT_DEVICE_NGNRNE ) | +PTE_BLOCK_NON_SHARE | +PTE_BLOCK_PXN |PTE_BLOCK_UXN + }, { +/* List terminator */ +0 , + } +}; + +struct mm_region *mem_map = owl_mem_map;
arch/arm/mach-owl/sysmap-s900.c deleted +0 -32
@@ -1,32 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* Actions Semi S900 Memory map -* -* Copyright (C) 2015 Actions Semi Co., Ltd. -* Copyright (C) 2018 Manivannan Sadhasivam <[email protected]> -*/ - -#include <common.h> -#include <asm/armv8/mmu.h> - -static struct mm_region s900_mem_map[] = { - { - .virt =0x0UL ,/* DDR */ - .phys =0x0UL ,/* DDR */ - .size =0x80000000UL , - .attrs =PTE_BLOCK_MEMTYPE (MT_NORMAL ) | -PTE_BLOCK_INNER_SHARE - }, { - .virt =0xE0000000UL ,/* Peripheral block */ - .phys =0xE0000000UL ,/* Peripheral block */ - .size =0x08000000UL , - .attrs =PTE_BLOCK_MEMTYPE (MT_DEVICE_NGNRNE ) | -PTE_BLOCK_NON_SHARE | -PTE_BLOCK_PXN |PTE_BLOCK_UXN - }, { -/* List terminator */ -0 , - } -}; - -struct mm_region *mem_map = s900_mem_map;
Signature · 1 line
2.7.4
PATCH v7 3/12 serial: actions: add compatible string
In reply to Amit Singh TomarThis patch adds "actions,owl-uart" string to the owl uart driver. It is also defined in Linux kernel.
---
Changes since v6:
* Added Reviewd-by tag.
Changes since v5:
* Moved it to from 06/11 to 03/11.
* Used appropriate commit message.
* Removed the reviwed-by tag.
Changes since v4:
* Moved it to from 09/11 to 06/11.
Changes since v3:
* Used only owl-uart for compatible string.
Changes since v2:
* No changes.
Changes since v1:
* No changes.
--- drivers/serial/serial_owl.c | 1 + 1 file changed, 1 insertion(+)
drivers/serial/serial_owl.c +1 -0
@@ -121,6 +121,7 @@ static const struct dm_serial_ops owl_serial_ops = {static const struct udevice_id owl_serial_ids[] = { { .compatible ="actions,s900-serial" }, + { .compatible ="actions,owl-uart" }, { } };
Signature · 1 line
2.7.4
PATCH v7 4/12 arm: dts: sync dts for Action Semi S900
In reply to Amit Singh TomarSynchronize device tree bindings with v5.5-rc6 tag with commit id "b3a987b0264d".
Also, it removes older clock binding defined for S900 along with undocumented compatible string "actions,s900-serial" from serial driver and adapts clock driver to cater to new bindings.
---
Changes since v6:
* Added Reviewed-by tag.
Changes since v5:
* Moved it 04/11 from 03/11.
* removed the undocumented compatible string "actions,s900-serial".
* removed the reviewed-by tag.
Changes since v4:
* This patch is re-ordered, moved from 07/11 to 03/11.
* Used the commit-id(12 chars long) in commit message.
Changes since v3:
* Added Reviewed-by: tag.
Changes since v2:
* Newly added patch, not there in v2/v1.
--- arch/arm/dts/s900.dtsi | 322 +++++++++++++++++++++++-- drivers/clk/owl/clk_s900.c | 6 +- drivers/serial/serial_owl.c | 1 - include/dt-bindings/clock/actions,s900-cmu.h | 129 ++++++++++ include/dt-bindings/clock/s900_cmu.h | 77 ------ include/dt-bindings/reset/actions,s900-reset.h | 65 +++++ 6 files changed, 498 insertions(+), 102 deletions(-) create mode 100644 include/dt-bindings/clock/actions,s900-cmu.h delete mode 100644 include/dt-bindings/clock/s900_cmu.h create mode 100644 include/dt-bindings/reset/actions,s900-reset.h
arch/arm/dts/s900.dtsi +301 -21
@@ -1,17 +1,94 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Device Tree Source for Actions Semi S900 SoC -// -// Copyright (C) 2015 Actions Semi Co., Ltd. -// Copyright (C) 2018 Manivannan Sadhasivam <[email protected]> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Andreas F?rber + */ -/dts-v1/; -#include <dt-bindings/clock/s900_cmu.h> +#include <dt-bindings/clock/actions,s900-cmu.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/actions,s900-reset.h> / { compatible = "actions,s900"; - #address-cells = <0x2>; - #size-cells = <0x2>; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu at 2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu at 3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secmon at 1f000000 { + reg = <0x0 0x1f000000 0x0 0x1000000>; + no-map; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + hosc: hosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; losc: losc { compatible = "fixed-clock";
@@ -26,28 +103,231 @@ }; soc { - u-boot,dm-pre-reloc; compatible = "simple-bus"; - #address-cells = <0x2>; - #size-cells = <0x2>; + #address-cells = <2>; + #size-cells = <2>; ranges; + gic: interrupt-controller at e00f1000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe00f1000 0x0 0x1000>, + <0x0 0xe00f2000 0x0 0x2000>, + <0x0 0xe00f4000 0x0 0x2000>, + <0x0 0xe00f6000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + uart0: serial at e0120000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0120000 0x0 0x2000>; + clocks = <&cmu CLK_UART0>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart1: serial at e0122000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0122000 0x0 0x2000>; + clocks = <&cmu CLK_UART1>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart2: serial at e0124000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0124000 0x0 0x2000>; + clocks = <&cmu CLK_UART2>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart3: serial at e0126000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0126000 0x0 0x2000>; + clocks = <&cmu CLK_UART3>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart4: serial at e0128000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0128000 0x0 0x2000>; + clocks = <&cmu CLK_UART4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + uart5: serial at e012a000 { - u-boot,dm-pre-reloc; - compatible = "actions,s900-serial"; - reg = <0x0 0xe012a000 0x0 0x1000>; - clocks = <&cmu CLOCK_UART5>; + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012a000 0x0 0x2000>; + clocks = <&cmu CLK_UART5>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + uart6: serial at e012c000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012c000 0x0 0x2000>; + clocks = <&cmu CLK_UART6>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sps: power-controller at e012e000 { + compatible = "actions,s900-sps"; + reg = <0x0 0xe012e000 0x0 0x2000>; + #power-domain-cells = <1>; + }; + cmu: clock-controller at e0160000 { - u-boot,dm-pre-reloc; compatible = "actions,s900-cmu"; reg = <0x0 0xe0160000 0x0 0x1000>; - clocks = <&losc>, <&diff24M>; - clock-names = "losc", "diff24M"; + clocks = <&hosc>, <&losc>; #clock-cells = <1>; + #reset-cells = <1>; + }; + + i2c0: i2c at e0170000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0170000 0 0x1000>; + clocks = <&cmu CLK_I2C0>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c at e0172000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0172000 0 0x1000>; + clocks = <&cmu CLK_I2C1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c at e0174000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0174000 0 0x1000>; + clocks = <&cmu CLK_I2C2>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c at e0176000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0176000 0 0x1000>; + clocks = <&cmu CLK_I2C3>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c at e0178000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0178000 0 0x1000>; + clocks = <&cmu CLK_I2C4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c at e017a000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe017a000 0 0x1000>; + clocks = <&cmu CLK_I2C5>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pinctrl: pinctrl at e01b0000 { + compatible = "actions,s900-pinctrl"; + reg = <0x0 0xe01b0000 0x0 0x1000>; + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer: timer at e0228000 { + compatible = "actions,s900-timer"; + reg = <0x0 0xe0228000 0x0 0x8000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "timer1"; + }; + + dma: dma-controller at e0260000 { + compatible = "actions,s900-dma"; + reg = <0x0 0xe0260000 0x0 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <12>; + dma-requests = <46>; + clocks = <&cmu CLK_DMAC>; + }; + + mmc0: mmc at e0330000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0330000 0x0 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD0>; + resets = <&cmu RESET_SD0>; + dmas = <&dma 2>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc1: mmc at e0334000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0334000 0x0 0x4000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD1>; + resets = <&cmu RESET_SD1>; + dmas = <&dma 3>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc2: mmc at e0338000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0338000 0x0 0x4000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD2>; + resets = <&cmu RESET_SD2>; + dmas = <&dma 4>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc3: mmc at e033c000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe033c000 0x0 0x4000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD3>; + resets = <&cmu RESET_SD3>; + dmas = <&dma 46>; + dma-names = "mmc"; + status = "disabled"; }; }; }; -
drivers/clk/owl/clk_s900.c +3 -3
@@ -12,7 +12,7 @@#include <asm/arch-owl/regs_s900.h> #include <asm/io.h> -#include <dt-bindings/clock/s900_cmu.h> +#include <dt-bindings/clock/actions,s900-cmu.h> void owl_clk_init (struct owl_clk_priv *priv) {
@@ -78,7 +78,7 @@ int owl_clk_enable(struct clk *clk)struct owl_clk_priv *priv =dev_get_priv (clk->dev);switch (clk->id) { -case CLOCK_UART5 : +case CLK_UART5 :owl_uart_clk_enable (priv);break ;default :
@@ -93,7 +93,7 @@ int owl_clk_disable(struct clk *clk)struct owl_clk_priv *priv =dev_get_priv (clk->dev);switch (clk->id) { -case CLOCK_UART5 : +case CLK_UART5 :owl_uart_clk_disable (priv);break ;default :
drivers/serial/serial_owl.c +0 -1
@@ -120,7 +120,6 @@ static const struct dm_serial_ops owl_serial_ops = { };static const struct udevice_id owl_serial_ids[] = { - { .compatible ="actions,s900-serial" }, { .compatible ="actions,owl-uart" }, { } };
include/dt-bindings/clock/actions,s900-cmu.h new file +129 -0
129 lines not on this page · raw message
include/dt-bindings/clock/s900_cmu.h deleted +0 -77
77 lines not on this page · raw message
include/dt-bindings/reset/actions,s900-reset.h new file +65 -0
65 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v7 5/12 arm: dts: actions: s900: add u-boot specific dtsi file
In reply to Amit Singh TomarDevices like uart and clk are needed to be enabled before relocation. This patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.
---
Changes since v6:
* No changes.
Changes since v5:
* No changes.
Changes since v4:
* This patch is re-ordered, moved from 08/11 to 04/11.
Changes since v3:
* Replaced dtsi with dts in subject line along with arm:dts:
to the prefix.
* Added reviewed-by tag.
Changes since v2:
* Newly added patch, not there in v2/v1.
--- arch/arm/dts/s900-u-boot.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 arch/arm/dts/s900-u-boot.dtsi
arch/arm/dts/s900-u-boot.dtsi new file +17 -0
@@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + */ + +/{ + soc { + u-boot,dm-pre-reloc; + }; +}; + +&uart5 { + u-boot,dm-pre-reloc; +}; + +&cmu { + u-boot,dm-pre-reloc; +};
Signature · 1 line
2.7.4
PATCH v7 6/12 clk: actions: Add common clock driver
In reply to Amit Singh TomarThis patch converts S900 clock driver to something common that can be used for other SoCs, for instance S700(few of clk registers are same).
---
Changes since v6:
* Fixed the bug that breaks S900(missing break in switch statement).
Changes since v5:
* No changes.
Changes since v4:
* This patch is re-ordered, moved from 08/11 to 04/11.
Changes since v3:
* Replaced dtsi with dts in subject line along with arm:dts:
to the prefix.
* Added reviewed-by tag.
Changes since v2:
* Newly added patch, not there in v2/v1.
--- arch/arm/Kconfig | 2 + arch/arm/include/asm/arch-owl/clk_s900.h | 57 ----------- arch/arm/include/asm/arch-owl/regs_s700.h | 56 +++++++++++ configs/bubblegum_96_defconfig | 3 - drivers/clk/owl/Kconfig | 8 +- drivers/clk/owl/Makefile | 2 +- drivers/clk/owl/clk_owl.c | 153 ++++++++++++++++++++++++++++++ drivers/clk/owl/clk_owl.h | 65 +++++++++++++ drivers/clk/owl/clk_s900.c | 137 -------------------------- 9 files changed, 279 insertions(+), 204 deletions(-) delete mode 100644 arch/arm/include/asm/arch-owl/clk_s900.h create mode 100644 arch/arm/include/asm/arch-owl/regs_s700.h create mode 100644 drivers/clk/owl/clk_owl.c create mode 100644 drivers/clk/owl/clk_owl.h delete mode 100644 drivers/clk/owl/clk_s900.c
arch/arm/Kconfig +2 -0
@@ -876,6 +876,8 @@ config ARCH_OWL select DM select DM_SERIAL select OWL_SERIAL + select CLK + select CLK_OWL select OF_CONTROL imply CMD_DM
arch/arm/include/asm/arch-owl/clk_s900.h deleted +0 -57
57 lines not on this page · raw message
arch/arm/include/asm/arch-owl/regs_s700.h new file +56 -0
56 lines not on this page · raw message
configs/bubblegum_96_defconfig +0 -3
@@ -17,6 +17,3 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIMER=y CONFIG_DEFAULT_DEVICE_TREE="bubblegum_96" CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_CLK=y -CONFIG_CLK_OWL=y -CONFIG_CLK_S900=y
drivers/clk/owl/Kconfig +2 -6
@@ -3,10 +3,6 @@ config CLK_OWL depends on CLK && ARCH_OWL help Enable support for clock managemet unit present in Actions Semi - OWL SoCs. + Owl series S900/S700 SoCs. + -config CLK_S900 - bool "Actions Semi S900 clock driver" - depends on CLK_OWL && ARM64 - help - Enable support for the clocks in Actions Semi S900 SoC.
drivers/clk/owl/Makefile +1 -1
@@ -1,3 +1,3 @@ # SPDX-License-Identifier: GPL-2.0+ -obj-$(CONFIG_CLK_S900) += clk_s900.o +obj-$(CONFIG_CLK_OWL) += clk_owl.o
drivers/clk/owl/clk_owl.c new file +153 -0
153 lines not on this page · raw message
drivers/clk/owl/clk_owl.h new file +65 -0
65 lines not on this page · raw message
drivers/clk/owl/clk_s900.c deleted +0 -137
137 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v7 7/12 arm: actions: add S700 SoC device tree
In reply to Amit Singh TomarThis patch adds .dtsi file(sync with Linux 5.5-rc6 with hash "b3a987b0264d") and required binding for S700 SoC that is a 64-bit Quad-core ARM Cortex-A53 cores.
It also provisions dts file to be built based on selected platform(CONFIG_MACH_S900/S700).
---
Changes since v6:
* No changes.
Changes since v5:
* Added reviwed-by tag.
Changes since v4:
* Move it to 07/11 from 05/11.
Changes since v3:
* Updated commit message to the Linux tag to which the dtsi file is synced.
Changes since v2:
* Synced DTS bindings with Linux 5.5.
Changes since v1:
* Moved the u-boot specific changes to s700-u-boot.dtsi, now s700.dtsi is in complete sync with Linux 4.20.
--- arch/arm/dts/Makefile | 6 +- arch/arm/dts/s700.dtsi | 248 +++++++++++++++++++++++++ include/dt-bindings/clock/actions,s700-cmu.h | 118 ++++++++++++ include/dt-bindings/reset/actions,s700-reset.h | 34 ++++ 4 files changed, 404 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/s700.dtsi create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h create mode 100644 include/dt-bindings/reset/actions,s700-reset.h
arch/arm/dts/Makefile +4 -2
@@ -64,8 +64,10 @@ dtb-$(CONFIG_KIRKWOOD) += \ kirkwood-pogo_e02.dtb \ kirkwood-sheevaplug.dtb -dtb-$(CONFIG_ARCH_OWL) += \ - bubblegum_96.dtb +dtb-$(CONFIG_MACH_S900) += \ + bubblegum_96.dtb +dtb-$(CONFIG_MACH_S700) += \ + s700-cubieboard7.dtb dtb-$(CONFIG_ROCKCHIP_PX30) += \ px30-evb.dtb \
arch/arm/dts/s700.dtsi new file +248 -0
248 lines not on this page · raw message
include/dt-bindings/clock/actions,s700-cmu.h new file +118 -0
118 lines not on this page · raw message
include/dt-bindings/reset/actions,s700-reset.h new file +34 -0
@@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +// +// Device Tree binding constants for Actions Semi S700 Reset Management Unit +// +// Copyright (c) 2018 Linaro Ltd. + +#ifndef __DT_BINDINGS_ACTIONS_S700_RESET_H +#define __DT_BINDINGS_ACTIONS_S700_RESET_H + +#define RESET_AUDIO 0 +#define RESET_CSI 1 +#define RESET_DE 2 +#define RESET_DSI 3 +#define RESET_GPIO 4 +#define RESET_I2C0 5 +#define RESET_I2C1 6 +#define RESET_I2C2 7 +#define RESET_I2C3 8 +#define RESET_KEY 9 +#define RESET_LCD0 10 +#define RESET_SI 11 +#define RESET_SPI0 12 +#define RESET_SPI1 13 +#define RESET_SPI2 14 +#define RESET_SPI3 15 +#define RESET_UART0 16 +#define RESET_UART1 17 +#define RESET_UART2 18 +#define RESET_UART3 19 +#define RESET_UART4 20 +#define RESET_UART5 21 +#define RESET_UART6 22 + +#endif /* __DT_BINDINGS_ACTIONS_S700_RESET_H */
Signature · 1 line
2.7.4
PATCH v7 8/12 arm: dts: actions: s700: add u-boot specific dtsi file
In reply to Amit Singh TomarDevices like uart and clk are needed to be enabled before relocation. this patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.
---
Changes since v6:
* No changes.
Changes since v5:
* Added reviwed-by tag.
Changes since v4:
* Moved it to 08/11 to 06/11.
Changes since v3:
* Replaced dtsi with dts in subject line along with arm:dts:
to the prefix.
Changes since v2:
* Added License.
Changes since v1:
* This is newly added file that was *not* present in v1 and contains u-boot specific changes.
--- arch/arm/dts/s700-u-boot.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 arch/arm/dts/s700-u-boot.dtsi
arch/arm/dts/s700-u-boot.dtsi new file +18 -0
@@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Amit Singh Tomar <[email protected]> + */ + +/{ + soc { + u-boot,dm-pre-reloc; + }; +}; + +&uart3 { + u-boot,dm-pre-reloc; +}; + +&cmu { + u-boot,dm-pre-reloc; +};
Signature · 1 line
2.7.4
PATCH v7 9/12 arm: add support Actions Semi S700
In reply to Amit Singh TomarThis patch adds basic support for Actions Semi based S700 SoC, which is driven by common owl framework.
---
Changes since v6:
* No changes.
Changes since v5:
* Added reviewed-by tag.
Changes since v4:
* Moved it to 09/11 to 04/11.
Changes since v3:
* Added "SoC" keyword to Actions Semi S700.
Changes since v2:
* Fixed the commit message.
* Checked for the clk->id.
* Added a .data member with SoC type.
* Removed #ifdefs from few places.
Changes since v1:
* Moved CLK and CLK_OWL symbols from defconfig to arch/arm/Kconfig.
--- arch/arm/mach-owl/Kconfig | 6 ++++++ include/configs/s700.h | 13 +++++++++++++ 2 files changed, 19 insertions(+) create mode 100644 include/configs/s700.h
arch/arm/mach-owl/Kconfig +6 -0
@@ -8,6 +8,10 @@ config MACH_S900 bool "Actions Semi S900 SoC" select ARM64 +config MACH_S700 + bool "Actions Semi S700 SoC" + select ARM64 + endchoice config SYS_TEXT_BASE
@@ -15,8 +19,10 @@ config SYS_TEXT_BASE config SYS_CONFIG_NAME default "s900" if MACH_S900 + default "s700" if MACH_S700 config SYS_SOC default "s900" if MACH_S900 + default "s700" if MACH_S700 endif
include/configs/s700.h new file +13 -0
@@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +*/ + +#ifndef _CONFIG_S700_H_ +#define _CONFIG_S700_H_ + +/* +* Include common owl configuration where most the settings are +*/ +#include <configs/owl-common.h> + +#endif
Signature · 1 line
2.7.4
PATCH v7 10/12 actions: Move defconfig options to Kconfig
In reply to Amit Singh TomarThis patch moves some of the config options from bubblegum_96_defconfig to platform specific Kconfig file.
---
Changes since v6:
* remove unnecessary string from SYS_PROMPT.
Changes since v5:
* Newly added patch, was not there in earlier versions.
--- arch/arm/mach-owl/Kconfig | 15 +++++++++++++++ configs/bubblegum_96_defconfig | 5 ----- 2 files changed, 15 insertions(+), 5 deletions(-)
arch/arm/mach-owl/Kconfig +15 -0
@@ -25,4 +25,19 @@ config SYS_SOC default "s900" if MACH_S900 default "s700" if MACH_S700 +config DISTRO_DEFAULTS + default y + +config NR_DRAM_BANKS + default 1 + +config SYS_RELOC_GD_ENV_ADDR + default y + +config SYS_PROMPT + default "U-Boot => " + +config DISPLAY_BOARDINFO + default n + endif
configs/bubblegum_96_defconfig +0 -5
@@ -1,19 +1,14 @@ CONFIG_ARM=y CONFIG_ARCH_OWL=y CONFIG_ENV_SIZE=0x2000 -CONFIG_NR_DRAM_BANKS=1 CONFIG_MACH_S900=y CONFIG_IDENT_STRING="\nBubblegum-96" -CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyOWL5,115200n8" # CONFIG_DISPLAY_CPUINFO is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_SYS_PROMPT="U-Boot => " CONFIG_CMD_MD5SUM=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIMER=y CONFIG_DEFAULT_DEVICE_TREE="bubblegum_96" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Signature · 1 line
2.7.4
PATCH v7 11/12 arm: add Cubieboard7 board support
In reply to Amit Singh TomarThe Cubieboard is a single board computer containing a Actions S700 SoC(with 4 ARMv8 Cortex-A53 cores).
This patch adds respective defconfig alongwith .dts(copied from Linux v5.5-rc6 with hash "b3a987b0264d").
---
Changes since v6:
* Added Reviewed-by tag.
Changes since v5:
* Trimmed of the cubieboard7_defconfig.
Changes since v4:
* No changes.
Changes since v3:
* added reviewed-by: tag.
Changes since v2:
* No changes.
Changes since v1:
* No changes.
--- arch/arm/dts/s700-cubieboard7.dts | 92 +++++++++++++++++++++++++++++++++++++++ configs/cubieboard7_defconfig | 9 ++++ 2 files changed, 101 insertions(+) create mode 100644 arch/arm/dts/s700-cubieboard7.dts create mode 100644 configs/cubieboard7_defconfig
arch/arm/dts/s700-cubieboard7.dts new file +92 -0
@@ -0,0 +1,92 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Andreas F?rber + */ + +/dts-v1/; + +#include "s700.dtsi" + +/ { + compatible = "cubietech,cubieboard7", "actions,s700"; + model = "CubieBoard7"; + + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + memory at 0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + memory at 1,e0000000 { + device_type = "memory"; + reg = <0x1 0xe0000000 0x0 0x0>; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default>; +}; + +&i2c2 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_default>; +}; + +&pinctrl { + i2c0_default: i2c0_default { + pinmux { + groups = "i2c0_mfp"; + function = "i2c0"; + }; + pinconf { + pins = "i2c0_sclk", "i2c0_sdata"; + bias-pull-up; + }; + }; + + i2c1_default: i2c1_default { + pinmux { + groups = "i2c1_dummy"; + function = "i2c1"; + }; + pinconf { + pins = "i2c1_sclk", "i2c1_sdata"; + bias-pull-up; + }; + }; + + i2c2_default: i2c2_default { + pinmux { + groups = "i2c2_dummy"; + function = "i2c2"; + }; + pinconf { + pins = "i2c2_sclk", "i2c2_sdata"; + bias-pull-up; + }; + }; +}; + +&timer { + clocks = <&hosc>; +}; + +&uart3 { + status = "okay"; +};
configs/cubieboard7_defconfig new file +9 -0
@@ -0,0 +1,9 @@ +CONFIG_ARM=y +CONFIG_ARCH_OWL=y +CONFIG_MACH_S700=y +CONFIG_IDENT_STRING="\ncubieboard7" +CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyOWL3,115200n8" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DEFAULT_DEVICE_TREE="s700-cubieboard7"
Signature · 1 line
2.7.4
PATCH v7 12/12 doc: boards: add Cubieboard7 documentation
In reply to Amit Singh TomarThis adds build and flash steps for Actions S700
based Cubieboard7 board.
---
Changes since v6:
* No changes.
Changes since v5:
* No changes.
Changes since v4:
* No changes.
Changes since v3:
* Convert plain text documentation to reStructuredText format.
Changes since v2:
* No Change.
Changes since v1:
* No Change.
--- doc/board/actions/cubieboard7.rst | 115 ++++++++++++++++++++++++++++++++++++++ doc/board/actions/index.rst | 10 ++++ doc/board/index.rst | 1 + 3 files changed, 126 insertions(+) create mode 100644 doc/board/actions/cubieboard7.rst create mode 100644 doc/board/actions/index.rst
doc/board/actions/cubieboard7.rst new file +115 -0
@@ -0,0 +1,115 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. Copyright (C) 2020 Amit Singh Tomar <[email protected]> + +ACTIONS +======== + +About this +---------- + +This document describes build and flash steps for Actions S700 SoC based Cubieboard7 +board. + +Cubieboard7 initial configuration +--------------------------------- + +Default Cubieboard7 comes with pre-installed Android where U-Boot is configured with +a bootdelay of 0, entering a prompt by pressing keys does not seem to work. + +Though, one can enter ADFU mode and flash debian image(from host machine) where +getting into u-boot prompt is easy. + +Enter ADFU Mode +---------------- + +Before write the firmware, let the development board entering the ADFU mode: insert +one end of the USB cable to the PC, press and hold the ADFU button, and then connect +the other end of the USB cable to the Mini USB port of the development board, release +the ADFU button, after connecting it will enter the ADFU mode. + +Check whether entered ADFU Mode +-------------------------------- + +The user needs to run the following command on the PC side to check if the ADFU +device is detected. ID realted to "Actions Semiconductor Co., Ltd" means that +the PC side has been correctly detected ADFU device, the development board +also enter into the ADFU mode. + +.. code-block:: none + + $ lsusb + Bus 001 Device 005: ID 04f2:b2eb Chicony Electronics Co., Ltd + Bus 001 Device 004: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad] + Bus 001 Device 003: ID 046d:c534 Logitech, Inc. Unifying Receiver + Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub + Bus 003 Device 013: ID 10d6:10d6 Actions Semiconductor Co., Ltd + Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + +Flashing debian image +--------------------- + +.. code-block:: none + + $ sudo ./ActionsFWU.py --fw=debian-stretch-desktop-cb7-emmc-v2.0.fw + ActionsFWU.py : 1.0.150828.0830 + libScript.so : 2.3.150825.0951 + libFileSystem.so: 2.3.150825.0952 + libProduction.so: 2.3.150915.1527 + =====burn all partition==== + FW_VER: 3.10.37.180608 + 3% DOWNLOAD ADFUDEC ... + 5% DOWNLOAD BOOT PARA ... + 7% SWITCH ADFUDEC ... + 12% DOWNLOAD BL31 ... + 13% DOWNLOAD BL32 ... + 15% DOWNLOAD VMLINUX ... + 20% DOWNLOAD INITRD ... + 24% DOWNLOAD FDT ... + 27% DOWNLOAD ADFUS ... + 30% SWITCH ADFUS ... + 32% DOWNLOAD MBR ... + 35% DOWNLOAD PARTITIONS ... + WRITE_MBRC_PARTITION + 35% write p0 size = 2048 : ok + WRITE_BOOT_PARTITION + 35% write p1 size = 2048 : ok + WRITE_MISC_PARTITION + 36% write p2 size = 98304 : ok + WRITE_SYSTEM_PARTITION + 94% write p3 size = 4608000 : ok + FORMAT_SWAP_PARTITION + 94% write p4 size = 20480 : ok + 95% TRANSFER OVER ... + Firmware upgrade successfully! + +Debian image can be downloaded from here[1]. + +Once debian image is flashed, one can get into u-boot prompt by pressing any key and from +there run ums command(make sure, usb cable is connected between host and target): + +.. code-block:: none + + owl> ums 0 mmc 1 + +Above command would mount debian image partition on host machine. + +Building U-BOOT proper image +---------------------------- + +.. code-block:: none + + $ make clean + $ export CROSS_COMPILE=aarch64-linux-gnu- + $ make ARCH=arm cubieboard7_defconfig + $ make -j16 + $ mkimage -A arm -T firmware -C none -O u-boot -a 0x11000000 -e 0x11000000 -d u-boot-dtb.bin u-boot-dtb.img >/dev/null + +u-boot-dtb.img can now be flashed to debian image partition mounted on host machine. + +.. code-block:: none + + $ sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1024 seek=3072 + +[1]: https://pan.baidu.com/s/1uawPr0Jao2HgWFLZCLzHAg#list/path=%2FCubieBoard_Download%2FBoard%2FCubieBoard7%2F%E6%96%B9%E7%B3%96%E6%96%B9%E6%A1%88%E5%BC%80%E5%8F%91%E8%B5%84%E6%96%99%2FImage%2FDebian%2FV2.1-test&parentPath=%2F
doc/board/actions/index.rst new file +10 -0
@@ -0,0 +1,10 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. Copyright (C) 2020 Amit Singh Tomar <[email protected]> + +Actions +======== + +.. toctree:: + :maxdepth: 2 + + cubieboard7
doc/board/index.rst +1 -0
@@ -6,6 +6,7 @@ Board-specific doc .. toctree:: :maxdepth: 2 + actions/index AndesTech/index atmel/index coreboot/index
Signature · 1 line
2.7.4