Skip to contentSkip to conversation

Actions S700 SoC support

PATCH Superseded Amit Singh Tomar 4 participants 46 messages Jan 25, 2020 – Mar 3, 2020

Subsystems (8)

v3 of 11 Superseded Latest is v11 →

lore
Share & tools
lore
#0 lore raw

v3 cover Actions S700 SoC support

Hi,

This is continuation of work[1], submitted(v2) almost a year back.

It adds Cubieboard7[1] support based on Action Semi's S700 SoC[2], It's Quad-core ARMv8 SoC with Cortex-A53 cores. Peripheral like UART seems to be compatible with S900 SoC(basic support for it is alreay present in u-boot).

First few patches(from 1/21 to 3/21) consolidates Actions Semiconductor SoCs support in u-boot(mostly insprired by SUXNI as suggested by Andre). Idea is to move every bit out from board/ucRobotics into arch/arm/mach-owl. It allows different SoCs to be driven by single "soc and Kconfig" file. It also includes common clock driver for S700 and S900. Patches(from 4/21 to 6/21 and 10/21 to 12/21) enables S700 SoC support alongwith Cubieboard7 board.

While at it, took the opportunity to sync S900 DT sources and bindings(patches from 7/21 to 8/21) with Linux(tag v5.5-rc6) and it is compiled-tested.

Patch(9/21) uses same name for ethernet clock binding and if it's ok, would like to send it to LKML as well.

Patches(from 13/21 to 14/21) adds support for RTL 8201F PHY module and introduce configuration option "RTL8201F_PHY_S700_RMII_TIMINGS" to fulfill specific timing requirements for S700.

Patches(from 15/21 to 17/21) adds support for generic reset controller, originally used for NEXELL[3] series but never gets merged and it can be used for S700.

Patches(from 18/21 to 21/21) are there to enable Ethenet support in S700, MAC is based on Designware IP These patches re-uses the existing driver(drivers/net/designware.c) and programs SoC specific bits to enable ethernet. SoC specific glue code is kept in dwmac_s700.c file, did it this way as found it more cleaner(but having said that I am not really sure, if it's bit of a overkill to have it) or we can keep this glue code somewhere in machine file?

S700 support is tested[4] on Cubieboard7 board and S900 support is just compiled tested.

Also, patches are rebased upon following commit:
2c871f9e084b2c03d1961884228a6901387ab8d6 Merge branch '2020-01-22-master-imports'

Thanks
-Amit

[1]: https://patchwork.ozlabs.org/cover/1020286/
[2]: http://www.actions-semi.com/en/productview.aspx?id=225
[3]: https://lists.denx.de/pipermail/u-boot/2017-November/313135.html
[4]: https://paste.ubuntu.com/p/GkFPn2xJfn/

Amit Singh Tomar (21):
arm: actions: Add common framework for Actions Semi SoCs
arm: actions: rename sysmap-s900 to sysmap-owl
clk: actions: Add common clock driver
arm: add support Actions Semi S700
arm: actions: add S700 SoC device tree
actions:s700: add u-boot specific dts file
arm: dts: sync dts for Action Semi S900
actions: s900: add u-boot specific dts file
arm: dts: Use consistent name "CLK_ETHERNET" for the Ethernet clock
binding
serial: actions: add uart support for s700
arm: add Cubieboard7 board support
actions: add Cubieboard7 README
net: phy: realtek: Add support for RTL8201F PHY module.
net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust
rx/tx timings
reset: add driver for generic reset controllers
arm: dts: s700: add node for reset controller
owl: Kconfig: Enable dm reset and generic reset
net: designware: s700: Add glue code for S700 mac
arm: dts: s700: add node for ethernet controller
owl: Kconfig: Enable dm eth for OWL platform
configs: Enable mac and phy configs

 MAINTAINERS                                    |   2 +
 arch/arm/Kconfig                               |   8 +-
 arch/arm/dts/Makefile                          |   6 +-
 arch/arm/dts/s700-cubieboard7.dts              |  39 +++
 arch/arm/dts/s700-u-boot.dtsi                  |  39 +++
 arch/arm/dts/s700.dtsi                         | 248 +++++++++++++++++++
 arch/arm/dts/s900-u-boot.dtsi                  |  17 ++
 arch/arm/dts/s900.dtsi                         | 322 +++++++++++++++++++++++--
 arch/arm/include/asm/arch-owl/clk_s900.h       |  57 -----
 arch/arm/include/asm/arch-owl/regs_s700.h      |  62 +++++
 arch/arm/mach-owl/Kconfig                      |  35 +--
 arch/arm/mach-owl/Makefile                     |   3 +-
 arch/arm/mach-owl/README.cubieboard7           |  88 +++++++
 arch/arm/mach-owl/soc.c                        |  57 +++++
 arch/arm/mach-owl/sysmap-owl.c                 |  32 +++
 arch/arm/mach-owl/sysmap-s900.c                |  32 ---
 board/ucRobotics/bubblegum_96/Kconfig          |  15 --
 board/ucRobotics/bubblegum_96/MAINTAINERS      |   6 -
 board/ucRobotics/bubblegum_96/Makefile         |   3 -
 board/ucRobotics/bubblegum_96/bubblegum_96.c   |  57 -----
 configs/bubblegum_96_defconfig                 |   7 +-
 configs/cubieboard7_defconfig                  |  20 ++
 drivers/clk/owl/Kconfig                        |   8 +-
 drivers/clk/owl/Makefile                       |   2 +-
 drivers/clk/owl/clk_owl.c                      | 159 ++++++++++++
 drivers/clk/owl/clk_owl.h                      |  65 +++++
 drivers/clk/owl/clk_s900.c                     | 137 -----------
 drivers/net/Kconfig                            |   7 +
 drivers/net/Makefile                           |   1 +
 drivers/net/dwmac_s700.c                       |  66 +++++
 drivers/net/phy/Kconfig                        |   9 +
 drivers/net/phy/realtek.c                      |  55 +++++
 drivers/reset/Kconfig                          |   6 +
 drivers/reset/Makefile                         |   1 +
 drivers/reset/reset-generic.c                  | 111 +++++++++
 drivers/serial/serial_owl.c                    |   1 +
 include/configs/bubblegum_96.h                 |  40 ---
 include/configs/owl-common.h                   |  40 +++
 include/configs/s700.h                         |  13 +
 include/configs/s900.h                         |  16 ++
 include/dt-bindings/clock/actions,s700-cmu.h   | 118 +++++++++
 include/dt-bindings/clock/actions,s900-cmu.h   | 129 ++++++++++
 include/dt-bindings/clock/s900_cmu.h           |  77 ------
 include/dt-bindings/reset/actions,s700-reset.h |  34 +++
 include/dt-bindings/reset/actions,s900-reset.h |  65 +++++
 45 files changed, 1835 insertions(+), 480 deletions(-)
 create mode 100644 arch/arm/dts/s700-cubieboard7.dts
 create mode 100644 arch/arm/dts/s700-u-boot.dtsi
 create mode 100644 arch/arm/dts/s700.dtsi
 create mode 100644 arch/arm/dts/s900-u-boot.dtsi
 delete mode 100644 arch/arm/include/asm/arch-owl/clk_s900.h
 create mode 100644 arch/arm/include/asm/arch-owl/regs_s700.h
 create mode 100644 arch/arm/mach-owl/README.cubieboard7
 create mode 100644 arch/arm/mach-owl/soc.c
 create mode 100644 arch/arm/mach-owl/sysmap-owl.c
 delete mode 100644 arch/arm/mach-owl/sysmap-s900.c
 delete mode 100644 board/ucRobotics/bubblegum_96/Kconfig
 delete mode 100644 board/ucRobotics/bubblegum_96/MAINTAINERS
 delete mode 100644 board/ucRobotics/bubblegum_96/Makefile
 delete mode 100644 board/ucRobotics/bubblegum_96/bubblegum_96.c
 create mode 100644 configs/cubieboard7_defconfig
 create mode 100644 drivers/clk/owl/clk_owl.c
 create mode 100644 drivers/clk/owl/clk_owl.h
 delete mode 100644 drivers/clk/owl/clk_s900.c
 create mode 100644 drivers/net/dwmac_s700.c
 create mode 100644 drivers/reset/reset-generic.c
 delete mode 100644 include/configs/bubblegum_96.h
 create mode 100644 include/configs/owl-common.h
 create mode 100644 include/configs/s700.h
 create mode 100644 include/configs/s900.h
 create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h
 create mode 100644 include/dt-bindings/clock/actions,s900-cmu.h
 delete mode 100644 include/dt-bindings/clock/s900_cmu.h
 create mode 100644 include/dt-bindings/reset/actions,s700-reset.h
 create mode 100644 include/dt-bindings/reset/actions,s900-reset.h
Signature · 1 line
2.7.4
#1 lore raw

PATCH v3 1/21 arm: actions: Add common framework for Actions Owl Semi SoCs

This commit adds common arch support for Actions Semi Owl series SoCs and removes the Bubblegum96 board files.

---
 MAINTAINERS                                  |  2 +
 arch/arm/Kconfig                             |  3 +-
 arch/arm/mach-owl/Kconfig                    | 29 ++++++--------
 arch/arm/mach-owl/Makefile                   |  1 +
 arch/arm/mach-owl/soc.c                      | 57 ++++++++++++++++++++++++++++
 board/ucRobotics/bubblegum_96/Kconfig        | 15 --------
 board/ucRobotics/bubblegum_96/MAINTAINERS    |  6 ---
 board/ucRobotics/bubblegum_96/Makefile       |  3 --
 board/ucRobotics/bubblegum_96/bubblegum_96.c | 57 ----------------------------
 configs/bubblegum_96_defconfig               |  4 +-
 include/configs/bubblegum_96.h               | 40 -------------------
 include/configs/owl-common.h                 | 40 +++++++++++++++++++
 include/configs/s900.h                       | 16 ++++++++
 13 files changed, 130 insertions(+), 143 deletions(-)
 create mode 100644 arch/arm/mach-owl/soc.c
 delete mode 100644 board/ucRobotics/bubblegum_96/Kconfig
 delete mode 100644 board/ucRobotics/bubblegum_96/MAINTAINERS
 delete mode 100644 board/ucRobotics/bubblegum_96/Makefile
 delete mode 100644 board/ucRobotics/bubblegum_96/bubblegum_96.c
 delete mode 100644 include/configs/bubblegum_96.h
 create mode 100644 include/configs/owl-common.h
 create mode 100644 include/configs/s900.h
MAINTAINERS +2 -0
index b0634b2..218d811 100644
@@ -266,6 +266,8 @@ F:	arch/arm/mach-owl/
 F:	board/ucRobotics/
 F:	drivers/clk/owl/
 F:	drivers/serial/serial_owl.c
+F:	include/configs/bubblegum_96.h
+F:	configs/bubblegum_96_defconfig
 
 ARM RENESAS RMOBILE/R-CAR
 M:	Nobuhiro Iwamatsu <[email protected]>
arch/arm/Kconfig +1 -2
index 9608f54..905118b 100644
@@ -883,9 +883,9 @@ config ARCH_MX5
 
 config ARCH_OWL
 	bool "Actions Semi OWL SoCs"
-	select ARM64
 	select DM
 	select DM_SERIAL
+	select OWL_SERIAL
 	select OF_CONTROL
 	imply CMD_DM
 
@@ -1878,7 +1878,6 @@ source "board/spear/spear600/Kconfig"
 source "board/spear/x600/Kconfig"
 source "board/st/stv0991/Kconfig"
 source "board/tcl/sl50/Kconfig"
-source "board/ucRobotics/bubblegum_96/Kconfig"
 source "board/birdland/bav335x/Kconfig"
 source "board/toradex/colibri_pxa270/Kconfig"
 source "board/variscite/dart_6ul/Kconfig"
arch/arm/mach-owl/Kconfig +12 -17
index 199e772..28f6121 100644
@@ -1,27 +1,22 @@
 if ARCH_OWL
 
-config SYS_SOC
-	default "owl"
-
 choice
-        prompt "Actions Semi OWL SoCs board select"
+        prompt "Actions Semi Owl SoC Variant"
         optional
 
-config TARGET_BUBBLEGUM_96
-	bool "96Boards Bubblegum-96"
-	help
-	  Support for 96Boards Bubblegum-96. This board complies with
-	  96Board Consumer Edition Specification. Features:
-	  - Actions Semi S900 SoC (4xCortex A53, Power VR G6230 GPU)
-	  - 2GiB RAM
-	  - 8GiB eMMC, uSD slot
-	  - WiFi, Bluetooth and GPS module
-	  - 2x Host, 1x Device USB port
-	  - HDMI
-	  - 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons
+config MACH_S900
+        bool "Actions Semi S900"
+        select ARM64
 
 endchoice
 
-source "board/ucRobotics/bubblegum_96/Kconfig"
+config SYS_TEXT_BASE
+        default 0x11000000
+
+config SYS_CONFIG_NAME
+        default "s900" if MACH_S900
+
+config SYS_SOC
+        default "s900" if MACH_S900
 
 endif
arch/arm/mach-owl/Makefile +1 -0
index 1b43dc2..0b181c6 100644
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier:	GPL-2.0+
 
+obj-y += soc.o
 obj-y += sysmap-s900.o
arch/arm/mach-owl/soc.c new file +57 -0

57 lines not on this page · raw message

board/ucRobotics/bubblegum_96/Kconfig deleted +0 -15
deleted file mode 100644
index 2dd40d9..0000000
@@ -1,15 +0,0 @@
-if TARGET_BUBBLEGUM_96
-
-config SYS_BOARD
-	default "bubblegum_96"
-
-config SYS_VENDOR
-	default "ucRobotics"
-
-config SYS_SOC
-	default "s900"
-
-config SYS_CONFIG_NAME
-	default "bubblegum_96"
-
-endif
board/ucRobotics/bubblegum_96/MAINTAINERS deleted +0 -6
deleted file mode 100644
index d0cb727..0000000
@@ -1,6 +0,0 @@
-BUBBLEGUM_96 BOARD
-M:	Manivannan Sadhasivam <[email protected]>
-S:	Maintained
-F:	board/ucRobotics/bubblegum_96/
-F:	include/configs/bubblegum_96.h
-F:	configs/bubblegum_96_defconfig
board/ucRobotics/bubblegum_96/Makefile deleted +0 -3
deleted file mode 100644
index c4b524d..0000000
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier:	GPL-2.0+
-
-obj-y   := bubblegum_96.o
board/ucRobotics/bubblegum_96/bubblegum_96.c deleted +0 -57

57 lines not on this page · raw message

configs/bubblegum_96_defconfig +1 -3
index ae44ce1..8c94def 100644
@@ -1,9 +1,8 @@
 CONFIG_ARM=y
 CONFIG_ARCH_OWL=y
-CONFIG_SYS_TEXT_BASE=0x11000000
 CONFIG_ENV_SIZE=0x2000
-CONFIG_TARGET_BUBBLEGUM_96=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_MACH_S900=y
 CONFIG_IDENT_STRING="\nBubblegum-96"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=5
@@ -21,4 +20,3 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_CLK=y
 CONFIG_CLK_OWL=y
 CONFIG_CLK_S900=y
-CONFIG_OWL_SERIAL=y
include/configs/bubblegum_96.h deleted +0 -40
deleted file mode 100644
index c739d66..0000000
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Board configuration file for Bubblegum-96
- *
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
- *
- */
-
-#ifndef _BUBBLEGUM_96_H_
-#define _BUGGLEGUM_96_H_
-
-/* SDRAM Definitions */
-#define CONFIG_SYS_SDRAM_BASE		0x0
-#define CONFIG_SYS_SDRAM_SIZE		0x80000000
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		(24000000)	/* 24MHz */
-
-#define CONFIG_SYS_MALLOC_LEN		(32 * 1024 * 1024)
-
-/* Some commands use this as the default load address */
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7ffc0)
-
-/*
- * This is the initial SP which is used only briefly for relocating the u-boot
- * image to the top of SDRAM. After relocation u-boot moves the stack to the
- * proper place.
- */
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE + 0x7ff00)
-
-/* UART Definitions */
-#define CONFIG_BAUDRATE			115200
-
-/* Console configuration */
-#define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-#endif
include/configs/owl-common.h new file +40 -0
new file mode 100644
index 0000000..f77a5fa
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Board configuration file for Actions Semi Owl SoCs.
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+ *
+ */
+
+#ifndef _OWL_COMMON_CONFIG_H_
+#define _OWL_COMMON_CONFIG_H_
+
+/* SDRAM Definitions */
+#define CONFIG_SYS_SDRAM_BASE		0x0
+#define CONFIG_SYS_SDRAM_SIZE		0x80000000
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY		(24000000)	/* 24MHz */
+
+#define CONFIG_SYS_MALLOC_LEN		(32 * 1024 * 1024)
+
+/* Some commands use this as the default load address */
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7ffc0)
+
+/*
+ * This is the initial SP which is used only briefly for relocating the u-boot
+ * image to the top of SDRAM. After relocation u-boot moves the stack to the
+ * proper place.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE + 0x7ff00)
+
+/* UART Definitions */
+#define CONFIG_BAUDRATE			115200
+
+/* Console configuration */
+#define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
+#define CONFIG_SYS_MAXARGS		64
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#endif
include/configs/s900.h new file +16 -0
new file mode 100644
index 0000000..7544cfc
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+ *
+ */
+
+#ifndef _CONFIG_S900_H_
+#define _CONFIG_S900_H_
+
+/*
+ * Include common owl configuration where most the settings are
+ */
+#include <configs/owl-common.h>
+
+#endif
Signature · 1 line
2.7.4
#2 lore raw

PATCH v3 1/21 arm: actions: Add common framework for Actions Owl Semi SoCs

Quoted 33 lines · Amit Singh Tomar

This commit adds common arch support for Actions Semi Owl series SoCs and removes the Bubblegum96 board files.

---
 MAINTAINERS                                  |  2 +
 arch/arm/Kconfig                             |  3 +-
 arch/arm/mach-owl/Kconfig                    | 29 ++++++--------
 arch/arm/mach-owl/Makefile                   |  1 +
 arch/arm/mach-owl/soc.c                      | 57 ++++++++++++++++++++++++++++
 board/ucRobotics/bubblegum_96/Kconfig        | 15 --------
 board/ucRobotics/bubblegum_96/MAINTAINERS    |  6 ---
 board/ucRobotics/bubblegum_96/Makefile       |  3 --
 board/ucRobotics/bubblegum_96/bubblegum_96.c | 57 ----------------------------
 configs/bubblegum_96_defconfig               |  4 +-
 include/configs/bubblegum_96.h               | 40 -------------------
 include/configs/owl-common.h                 | 40 +++++++++++++++++++
 include/configs/s900.h                       | 16 ++++++++
 13 files changed, 130 insertions(+), 143 deletions(-)
 create mode 100644 arch/arm/mach-owl/soc.c
 delete mode 100644 board/ucRobotics/bubblegum_96/Kconfig
 delete mode 100644 board/ucRobotics/bubblegum_96/MAINTAINERS
 delete mode 100644 board/ucRobotics/bubblegum_96/Makefile
 delete mode 100644 board/ucRobotics/bubblegum_96/bubblegum_96.c
 delete mode 100644 include/configs/bubblegum_96.h
 create mode 100644 include/configs/owl-common.h
 create mode 100644 include/configs/s900.h
MAINTAINERS +0 -0
index b0634b2..218d811 100644

MAINTAINERS F: arch/arm/mach-owl/ · line 269

Quoted 4 lines
MAINTAINERS +1 -0
@@ -266,6 +266,8 @@ F:	arch/arm/mach-owl/
 F:	board/ucRobotics/
 F:	drivers/clk/owl/
 F:	drivers/serial/serial_owl.c
+F:	include/configs/bubblegum_96.h

This got changed to include/configs/owl-common.h

Quoted 46 lines
MAINTAINERS +1 -0
+F:	configs/bubblegum_96_defconfig
 
 ARM RENESAS RMOBILE/R-CAR
 M:	Nobuhiro Iwamatsu <[email protected]>
arch/arm/Kconfig +1 -2
index 9608f54..905118b 100644
@@ -883,9 +883,9 @@ config ARCH_MX5
 
 config ARCH_OWL
 	bool "Actions Semi OWL SoCs"
-	select ARM64
 	select DM
 	select DM_SERIAL
+	select OWL_SERIAL
 	select OF_CONTROL
 	imply CMD_DM
 
@@ -1878,7 +1878,6 @@ source "board/spear/spear600/Kconfig"
 source "board/spear/x600/Kconfig"
 source "board/st/stv0991/Kconfig"
 source "board/tcl/sl50/Kconfig"
-source "board/ucRobotics/bubblegum_96/Kconfig"
 source "board/birdland/bav335x/Kconfig"
 source "board/toradex/colibri_pxa270/Kconfig"
 source "board/variscite/dart_6ul/Kconfig"
arch/arm/mach-owl/Kconfig +1 -8
index 199e772..28f6121 100644
@@ -1,27 +1,22 @@
 if ARCH_OWL
 
-config SYS_SOC
-	default "owl"
-
 choice
-        prompt "Actions Semi OWL SoCs board select"
+        prompt "Actions Semi Owl SoC Variant"
         optional
 
-config TARGET_BUBBLEGUM_96
-	bool "96Boards Bubblegum-96"
-	help
-	  Support for 96Boards Bubblegum-96. This board complies with

arch/arm/mach-owl/Kconfig line 8

Quoted 10 lines
arch/arm/mach-owl/Kconfig +2 -8
-	  96Board Consumer Edition Specification. Features:
-	  - Actions Semi S900 SoC (4xCortex A53, Power VR G6230 GPU)
-	  - 2GiB RAM
-	  - 8GiB eMMC, uSD slot
-	  - WiFi, Bluetooth and GPS module
-	  - 2x Host, 1x Device USB port
-	  - HDMI
-	  - 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons
+config MACH_S900
+        bool "Actions Semi S900"

Actions Semi S900 SoC

Quoted 30 lines
arch/arm/mach-owl/Kconfig +9 -1
+        select ARM64
 
 endchoice
 
-source "board/ucRobotics/bubblegum_96/Kconfig"
+config SYS_TEXT_BASE
+        default 0x11000000
+
+config SYS_CONFIG_NAME
+        default "s900" if MACH_S900
+
+config SYS_SOC
+        default "s900" if MACH_S900
 
 endif
arch/arm/mach-owl/Makefile +1 -0
index 1b43dc2..0b181c6 100644
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier:	GPL-2.0+
 
+obj-y += soc.o
 obj-y += sysmap-s900.o
arch/arm/mach-owl/soc.c new file +0 -0
new file mode 100644
index 0000000..0f9ac64

arch/arm/mach-owl/soc.c line 4

Quoted 4 lines
arch/arm/mach-owl/soc.c new file +4 -0
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Actions Semi Owl SoCs Boards Support.
+ *

Actions Semi Owl SoCs platform support

Thanks,
Mani

Quoted 295 lines
arch/arm/mach-owl/soc.c new file +53 -0
+ * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+ */
+
+#include <cpu_func.h>
+#include <linux/arm-smccc.h>
+#include <linux/psci.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/psci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * dram_init - sets uboots idea of sdram size
+ */
+int dram_init(void)
+{
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+	return 0;
+}
+
+/* This is called after dram_init() so use get_ram_size result */
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+
+	return 0;
+}
+
+static void show_psci_version(void)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(ARM_PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0, 0, 0, 0, 0, &res);
+
+	printf("PSCI:  v%ld.%ld\n",
+		PSCI_VERSION_MAJOR(res.a0),
+		PSCI_VERSION_MINOR(res.a0));
+}
+
+int board_init(void)
+{
+	show_psci_version();
+
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+	psci_system_reset();
+}
board/ucRobotics/bubblegum_96/Kconfig deleted +0 -15
deleted file mode 100644
index 2dd40d9..0000000
@@ -1,15 +0,0 @@
-if TARGET_BUBBLEGUM_96
-
-config SYS_BOARD
-	default "bubblegum_96"
-
-config SYS_VENDOR
-	default "ucRobotics"
-
-config SYS_SOC
-	default "s900"
-
-config SYS_CONFIG_NAME
-	default "bubblegum_96"
-
-endif
board/ucRobotics/bubblegum_96/MAINTAINERS deleted +0 -6
deleted file mode 100644
index d0cb727..0000000
@@ -1,6 +0,0 @@
-BUBBLEGUM_96 BOARD
-M:	Manivannan Sadhasivam <[email protected]>
-S:	Maintained
-F:	board/ucRobotics/bubblegum_96/
-F:	include/configs/bubblegum_96.h
-F:	configs/bubblegum_96_defconfig
board/ucRobotics/bubblegum_96/Makefile deleted +0 -3
deleted file mode 100644
index c4b524d..0000000
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier:	GPL-2.0+
-
-obj-y   := bubblegum_96.o
board/ucRobotics/bubblegum_96/bubblegum_96.c deleted +0 -57
deleted file mode 100644
index c16f117..0000000
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Bubblegum-96 Boards Support
- *
- * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
- */
-
-#include <cpu_func.h>
-#include <linux/arm-smccc.h>
-#include <linux/psci.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/psci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * dram_init - sets uboots idea of sdram size
- */
-int dram_init(void)
-{
-	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-	return 0;
-}
-
-/* This is called after dram_init() so use get_ram_size result */
-int dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	gd->bd->bi_dram[0].size = gd->ram_size;
-
-	return 0;
-}
-
-static void show_psci_version(void)
-{
-	struct arm_smccc_res res;
-
-	arm_smccc_smc(ARM_PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0, 0, 0, 0, 0, &res);
-
-	printf("PSCI:  v%ld.%ld\n",
-	       PSCI_VERSION_MAJOR(res.a0),
-		PSCI_VERSION_MINOR(res.a0));
-}
-
-int board_init(void)
-{
-	show_psci_version();
-
-	return 0;
-}
-
-void reset_cpu(ulong addr)
-{
-	psci_system_reset();
-}
configs/bubblegum_96_defconfig +1 -3
index ae44ce1..8c94def 100644
@@ -1,9 +1,8 @@
 CONFIG_ARM=y
 CONFIG_ARCH_OWL=y
-CONFIG_SYS_TEXT_BASE=0x11000000
 CONFIG_ENV_SIZE=0x2000
-CONFIG_TARGET_BUBBLEGUM_96=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_MACH_S900=y
 CONFIG_IDENT_STRING="\nBubblegum-96"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=5
@@ -21,4 +20,3 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_CLK=y
 CONFIG_CLK_OWL=y
 CONFIG_CLK_S900=y
-CONFIG_OWL_SERIAL=y
include/configs/bubblegum_96.h deleted +0 -40
deleted file mode 100644
index c739d66..0000000
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Board configuration file for Bubblegum-96
- *
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
- *
- */
-
-#ifndef _BUBBLEGUM_96_H_
-#define _BUGGLEGUM_96_H_
-
-/* SDRAM Definitions */
-#define CONFIG_SYS_SDRAM_BASE		0x0
-#define CONFIG_SYS_SDRAM_SIZE		0x80000000
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		(24000000)	/* 24MHz */
-
-#define CONFIG_SYS_MALLOC_LEN		(32 * 1024 * 1024)
-
-/* Some commands use this as the default load address */
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7ffc0)
-
-/*
- * This is the initial SP which is used only briefly for relocating the u-boot
- * image to the top of SDRAM. After relocation u-boot moves the stack to the
- * proper place.
- */
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE + 0x7ff00)
-
-/* UART Definitions */
-#define CONFIG_BAUDRATE			115200
-
-/* Console configuration */
-#define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-#endif
include/configs/owl-common.h new file +40 -0
new file mode 100644
index 0000000..f77a5fa
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Board configuration file for Actions Semi Owl SoCs.
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+ *
+ */
+
+#ifndef _OWL_COMMON_CONFIG_H_
+#define _OWL_COMMON_CONFIG_H_
+
+/* SDRAM Definitions */
+#define CONFIG_SYS_SDRAM_BASE		0x0
+#define CONFIG_SYS_SDRAM_SIZE		0x80000000
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY		(24000000)	/* 24MHz */
+
+#define CONFIG_SYS_MALLOC_LEN		(32 * 1024 * 1024)
+
+/* Some commands use this as the default load address */
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7ffc0)
+
+/*
+ * This is the initial SP which is used only briefly for relocating the u-boot
+ * image to the top of SDRAM. After relocation u-boot moves the stack to the
+ * proper place.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE + 0x7ff00)
+
+/* UART Definitions */
+#define CONFIG_BAUDRATE			115200
+
+/* Console configuration */
+#define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
+#define CONFIG_SYS_MAXARGS		64
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#endif
include/configs/s900.h new file +16 -0
new file mode 100644
index 0000000..7544cfc
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+ *
+ */
+
+#ifndef _CONFIG_S900_H_
+#define _CONFIG_S900_H_
+
+/*
+ * Include common owl configuration where most the settings are
+ */
+#include <configs/owl-common.h>
+
+#endif
Signature · 1 line
2.7.4
#3 lore raw

PATCH v3 2/21 arm: actions: rename sysmap-s900 to sysmap-owl

In reply to Amit Singh Tomar

Now that memory maps(for both S700 and S900 SoCs) can be managed using a common file, rename sysmap-s900 to sysmap-owl to reflect the same.

---
Changes since v2:
* Fixed the commit message and header.
Changes since v1:
* compile sysmap-owl.c against CONFIG_ARM64 now.

---
 arch/arm/mach-owl/Makefile      |  2 +-
 arch/arm/mach-owl/sysmap-owl.c  | 32 ++++++++++++++++++++++++++++++++
 arch/arm/mach-owl/sysmap-s900.c | 32 --------------------------------
 3 files changed, 33 insertions(+), 33 deletions(-)
 create mode 100644 arch/arm/mach-owl/sysmap-owl.c
 delete mode 100644 arch/arm/mach-owl/sysmap-s900.c
arch/arm/mach-owl/Makefile +1 -1
index 0b181c6..f3a69eb 100644
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier:	GPL-2.0+
 
 obj-y += soc.o
-obj-y += sysmap-s900.o
+obj-$(CONFIG_ARM64) += sysmap-owl.o
arch/arm/mach-owl/sysmap-owl.c new file +32 -0
new file mode 100644
index 0000000..81f6ca2
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Memory map for Actions Semi Owl series SoCs.
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+
+static struct mm_region owl_mem_map[] = {
+	{
+		.virt = 0x0UL, /* DDR */
+		.phys = 0x0UL, /* DDR */
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xE0000000UL, /* Peripheral block */
+		.phys = 0xE0000000UL, /* Peripheral block */
+		.size = 0x08000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = owl_mem_map;
arch/arm/mach-owl/sysmap-s900.c deleted +0 -32
deleted file mode 100644
index f78b639..0000000
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Actions Semi S900 Memory map
- *
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
- */
-
-#include <common.h>
-#include <asm/armv8/mmu.h>
-
-static struct mm_region s900_mem_map[] = {
-	{
-		.virt = 0x0UL, /* DDR */
-		.phys = 0x0UL, /* DDR */
-		.size = 0x80000000UL,
-		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
-			 PTE_BLOCK_INNER_SHARE
-	}, {
-		.virt = 0xE0000000UL, /* Peripheral block */
-		.phys = 0xE0000000UL, /* Peripheral block */
-		.size = 0x08000000UL,
-		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
-			 PTE_BLOCK_NON_SHARE |
-			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
-	}, {
-		/* List terminator */
-		0,
-	}
-};
-
-struct mm_region *mem_map = s900_mem_map;
Signature · 1 line
2.7.4
#4 lore raw

PATCH v3 2/21 arm: actions: rename sysmap-s900 to sysmap-owl

Quoted 4 lines · Amit Singh Tomar

Now that memory maps(for both S700 and S900 SoCs) can be managed using a common file, rename sysmap-s900 to sysmap-owl to reflect the same.

Thanks,
Mani

Quoted 102 lines

---
Changes since v2:
* Fixed the commit message and header.
Changes since v1:
* compile sysmap-owl.c against CONFIG_ARM64 now.

---
 arch/arm/mach-owl/Makefile      |  2 +-
 arch/arm/mach-owl/sysmap-owl.c  | 32 ++++++++++++++++++++++++++++++++
 arch/arm/mach-owl/sysmap-s900.c | 32 --------------------------------
 3 files changed, 33 insertions(+), 33 deletions(-)
 create mode 100644 arch/arm/mach-owl/sysmap-owl.c
 delete mode 100644 arch/arm/mach-owl/sysmap-s900.c
arch/arm/mach-owl/Makefile +1 -1
index 0b181c6..f3a69eb 100644
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier:	GPL-2.0+
 
 obj-y += soc.o
-obj-y += sysmap-s900.o
+obj-$(CONFIG_ARM64) += sysmap-owl.o
arch/arm/mach-owl/sysmap-owl.c new file +32 -0
new file mode 100644
index 0000000..81f6ca2
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Memory map for Actions Semi Owl series SoCs.
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+
+static struct mm_region owl_mem_map[] = {
+	{
+		.virt = 0x0UL, /* DDR */
+		.phys = 0x0UL, /* DDR */
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xE0000000UL, /* Peripheral block */
+		.phys = 0xE0000000UL, /* Peripheral block */
+		.size = 0x08000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = owl_mem_map;
arch/arm/mach-owl/sysmap-s900.c deleted +0 -32
deleted file mode 100644
index f78b639..0000000
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Actions Semi S900 Memory map
- *
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
- */
-
-#include <common.h>
-#include <asm/armv8/mmu.h>
-
-static struct mm_region s900_mem_map[] = {
-	{
-		.virt = 0x0UL, /* DDR */
-		.phys = 0x0UL, /* DDR */
-		.size = 0x80000000UL,
-		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
-			 PTE_BLOCK_INNER_SHARE
-	}, {
-		.virt = 0xE0000000UL, /* Peripheral block */
-		.phys = 0xE0000000UL, /* Peripheral block */
-		.size = 0x08000000UL,
-		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
-			 PTE_BLOCK_NON_SHARE |
-			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
-	}, {
-		/* List terminator */
-		0,
-	}
-};
-
-struct mm_region *mem_map = s900_mem_map;
Signature · 1 line
2.7.4
#5 lore raw

PATCH v3 3/21 clk: actions: Add common clock driver

In reply to Amit Singh Tomar

This patch converts S900 clock driver to something common that can be used for other SoCs, for instance S700(few of clk registres are same).

---
Changes since v2:
* Fixed the commit message.
* Checked for the clk->id.
* Added a .data member with SoC type.
* Removed #ifdefs from few places.
Changes since v1:
* Moved CLK and CLK_OWL symbols from defconfig to arch/arm/Kconfig.

---
 arch/arm/Kconfig                          |   2 +
 arch/arm/include/asm/arch-owl/clk_s900.h  |  57 -----------
 arch/arm/include/asm/arch-owl/regs_s700.h |  56 +++++++++++
 configs/bubblegum_96_defconfig            |   3 -
 drivers/clk/owl/Kconfig                   |   8 +-
 drivers/clk/owl/Makefile                  |   2 +-
 drivers/clk/owl/clk_owl.c                 | 159 ++++++++++++++++++++++++++++++
 drivers/clk/owl/clk_owl.h                 |  65 ++++++++++++
 drivers/clk/owl/clk_s900.c                | 137 -------------------------
 9 files changed, 285 insertions(+), 204 deletions(-)
 delete mode 100644 arch/arm/include/asm/arch-owl/clk_s900.h
 create mode 100644 arch/arm/include/asm/arch-owl/regs_s700.h
 create mode 100644 drivers/clk/owl/clk_owl.c
 create mode 100644 drivers/clk/owl/clk_owl.h
 delete mode 100644 drivers/clk/owl/clk_s900.c
arch/arm/Kconfig +2 -0
index 905118b..e6a9d32 100644
@@ -886,6 +886,8 @@ config ARCH_OWL
 	select DM
 	select DM_SERIAL
 	select OWL_SERIAL
+	select CLK
+	select CLK_OWL
 	select OF_CONTROL
 	imply CMD_DM
 
arch/arm/include/asm/arch-owl/clk_s900.h deleted +0 -57

57 lines not on this page · raw message

arch/arm/include/asm/arch-owl/regs_s700.h new file +56 -0

56 lines not on this page · raw message

configs/bubblegum_96_defconfig +0 -3
index 8c94def..e76e9a2 100644
@@ -17,6 +17,3 @@ CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIMER=y
 CONFIG_DEFAULT_DEVICE_TREE="bubblegum_96"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_CLK=y
-CONFIG_CLK_OWL=y
-CONFIG_CLK_S900=y
drivers/clk/owl/Kconfig +2 -6
index 661f198..b2582d3 100644
@@ -3,10 +3,6 @@ config CLK_OWL
         depends on CLK && ARCH_OWL
         help
           Enable support for clock managemet unit present in Actions Semi
-	  OWL SoCs.
+	  S900/S700 SoCs.
+
 
-config CLK_S900
-        bool "Actions Semi S900 clock driver"
-        depends on CLK_OWL && ARM64
-        help
-          Enable support for the clocks in Actions Semi S900 SoC.
drivers/clk/owl/Makefile +1 -1
index 63ab573..5218b6b 100644
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-obj-$(CONFIG_CLK_S900) += clk_s900.o
+obj-$(CONFIG_CLK_OWL) += clk_owl.o
drivers/clk/owl/clk_owl.c new file +159 -0

159 lines not on this page · raw message

drivers/clk/owl/clk_owl.h new file +65 -0

65 lines not on this page · raw message

drivers/clk/owl/clk_s900.c deleted +0 -137

137 lines not on this page · raw message

Signature · 1 line
2.7.4
#6 lore raw

PATCH v3 3/21 clk: actions: Add common clock driver

Quoted 3 lines · Amit Singh Tomar

This patch converts S900 clock driver to something common that can be used for other SoCs, for instance S700(few of clk registres are same).

registers

Quoted 180 lines

---
Changes since v2:
* Fixed the commit message.
* Checked for the clk->id.
* Added a .data member with SoC type.
* Removed #ifdefs from few places.
Changes since v1:
* Moved CLK and CLK_OWL symbols from defconfig to arch/arm/Kconfig.

---
 arch/arm/Kconfig                          |   2 +
 arch/arm/include/asm/arch-owl/clk_s900.h  |  57 -----------
 arch/arm/include/asm/arch-owl/regs_s700.h |  56 +++++++++++
 configs/bubblegum_96_defconfig            |   3 -
 drivers/clk/owl/Kconfig                   |   8 +-
 drivers/clk/owl/Makefile                  |   2 +-
 drivers/clk/owl/clk_owl.c                 | 159 ++++++++++++++++++++++++++++++
 drivers/clk/owl/clk_owl.h                 |  65 ++++++++++++
 drivers/clk/owl/clk_s900.c                | 137 -------------------------
 9 files changed, 285 insertions(+), 204 deletions(-)
 delete mode 100644 arch/arm/include/asm/arch-owl/clk_s900.h
 create mode 100644 arch/arm/include/asm/arch-owl/regs_s700.h
 create mode 100644 drivers/clk/owl/clk_owl.c
 create mode 100644 drivers/clk/owl/clk_owl.h
 delete mode 100644 drivers/clk/owl/clk_s900.c
arch/arm/Kconfig +2 -0
index 905118b..e6a9d32 100644
@@ -886,6 +886,8 @@ config ARCH_OWL
 	select DM
 	select DM_SERIAL
 	select OWL_SERIAL
+	select CLK
+	select CLK_OWL
 	select OF_CONTROL
 	imply CMD_DM
 
arch/arm/include/asm/arch-owl/clk_s900.h deleted +0 -57
deleted file mode 100644
index 88e88f7..0000000
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Actions Semi S900 Clock Definitions
- *
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
- *
- */
-
-#ifndef _OWL_CLK_S900_H_
-#define _OWL_CLK_S900_H_
-
-#include <clk-uclass.h>
-
-struct owl_clk_priv {
-	phys_addr_t base;
-};
-
-/* BUSCLK register definitions */
-#define CMU_PDBGDIV_8		7
-#define CMU_PDBGDIV_SHIFT	26
-#define CMU_PDBGDIV_DIV		(CMU_PDBGDIV_8 << CMU_PDBGDIV_SHIFT)
-#define CMU_PERDIV_8		7
-#define CMU_PERDIV_SHIFT	20
-#define CMU_PERDIV_DIV		(CMU_PERDIV_8 << CMU_PERDIV_SHIFT)
-#define CMU_NOCDIV_2		1
-#define CMU_NOCDIV_SHIFT	19
-#define CMU_NOCDIV_DIV		(CMU_NOCDIV_2 << CMU_NOCDIV_SHIFT)
-#define CMU_DMMCLK_SRC_APLL	2
-#define CMU_DMMCLK_SRC_SHIFT	10
-#define CMU_DMMCLK_SRC		(CMU_DMMCLK_SRC_APLL << CMU_DMMCLK_SRC_SHIFT)
-#define CMU_APBCLK_DIV		BIT(8)
-#define CMU_NOCCLK_SRC		BIT(7)
-#define CMU_AHBCLK_DIV		BIT(4)
-#define CMU_CORECLK_MASK	3
-#define CMU_CORECLK_CPLL	BIT(1)
-#define CMU_CORECLK_HOSC	BIT(0)
-
-/* COREPLL register definitions */
-#define CMU_COREPLL_EN		BIT(9)
-#define CMU_COREPLL_HOSC_EN	BIT(8)
-#define CMU_COREPLL_OUT		(1104 / 24)
-
-/* DEVPLL register definitions */
-#define CMU_DEVPLL_CLK		BIT(12)
-#define CMU_DEVPLL_EN		BIT(8)
-#define CMU_DEVPLL_OUT		(660 / 6)
-
-/* UARTCLK register definitions */
-#define CMU_UARTCLK_SRC_DEVPLL	BIT(16)
-
-/* DEVCLKEN1 register definitions */
-#define CMU_DEVCLKEN1_UART5	BIT(21)
-
-#define PLL_STABILITY_WAIT_US	50
-
-#endif
arch/arm/include/asm/arch-owl/regs_s700.h new file +56 -0
new file mode 100644
index 0000000..a0bd737
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Actions Semi S700 Register Definitions
+ *
+ */
+
+#ifndef _OWL_REGS_S700_H_
+#define _OWL_REGS_S700_H_
+
+#define CMU_COREPLL		(0x0000)
+#define CMU_DEVPLL		(0x0004)
+#define CMU_DDRPLL		(0x0008)
+#define CMU_NANDPLL		(0x000C)
+#define CMU_DISPLAYPLL		(0x0010)
+#define CMU_AUDIOPLL		(0x0014)
+#define CMU_TVOUTPLL		(0x0018)
+#define CMU_BUSCLK		(0x001C)
+#define CMU_SENSORCLK		(0x0020)
+#define CMU_LCDCLK		(0x0024)
+#define CMU_DSIPLLCLK		(0x0028)
+#define CMU_CSICLK		(0x002C)
+#define CMU_DECLK		(0x0030)
+#define CMU_SICLK		(0x0034)
+#define CMU_BUSCLK1		(0x0038)
+#define CMU_HDECLK		(0x003C)
+#define CMU_VDECLK		(0x0040)
+#define CMU_VCECLK		(0x0044)
+#define CMU_NANDCCLK		(0x004C)
+#define CMU_SD0CLK		(0x0050)
+#define CMU_SD1CLK		(0x0054)
+#define CMU_SD2CLK		(0x0058)
+#define CMU_UART0CLK		(0x005C)
+#define CMU_UART1CLK		(0x0060)
+#define CMU_UART2CLK		(0x0064)
+#define CMU_UART3CLK		(0x0068)
+#define CMU_UART4CLK		(0x006C)
+#define CMU_UART5CLK		(0x0070)
+#define CMU_UART6CLK		(0x0074)
+#define CMU_PWM0CLK		(0x0078)
+#define CMU_PWM1CLK		(0x007C)
+#define CMU_PWM2CLK		(0x0080)
+#define CMU_PWM3CLK		(0x0084)
+#define CMU_PWM4CLK		(0x0088)
+#define CMU_PWM5CLK		(0x008C)
+#define CMU_GPU3DCLK		(0x0090)
+#define CMU_CORECTL		(0x009C)
+#define CMU_DEVCLKEN0		(0x00A0)
+#define CMU_DEVCLKEN1		(0x00A4)
+#define CMU_DEVRST0		(0x00A8)
+#define CMU_DEVRST1		(0x00AC)
+#define CMU_USBPLL		(0x00B0)
+#define CMU_ETHERNETPLL		(0x00B4)
+#define CMU_CVBSPLL		(0x00B8)
+#define CMU_SSTSCLK		(0x00C0)
+
+#endif
configs/bubblegum_96_defconfig +0 -3
index 8c94def..e76e9a2 100644
@@ -17,6 +17,3 @@ CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIMER=y
 CONFIG_DEFAULT_DEVICE_TREE="bubblegum_96"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_CLK=y
-CONFIG_CLK_OWL=y
-CONFIG_CLK_S900=y
drivers/clk/owl/Kconfig +0 -0
index 661f198..b2582d3 100644

drivers/clk/owl/Kconfig config CLK_OWL · line 7

Quoted 6 lines
drivers/clk/owl/Kconfig +2 -1
@@ -3,10 +3,6 @@ config CLK_OWL
         depends on CLK && ARCH_OWL
         help
           Enable support for clock managemet unit present in Actions Semi
-	  OWL SoCs.
+	  S900/S700 SoCs.
+

It'd be good to keep the family name:

Enable support for clock managemet unit present in Actions Semi Owl series S900/S700 SoCs.

Quoted 40 lines
drivers/clk/owl/Kconfig +0 -5
-config CLK_S900
-        bool "Actions Semi S900 clock driver"
-        depends on CLK_OWL && ARM64
-        help
-          Enable support for the clocks in Actions Semi S900 SoC.
drivers/clk/owl/Makefile +1 -1
index 63ab573..5218b6b 100644
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-obj-$(CONFIG_CLK_S900) += clk_s900.o
+obj-$(CONFIG_CLK_OWL) += clk_owl.o
drivers/clk/owl/clk_owl.c new file +19 -0
new file mode 100644
index 0000000..050dd45
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Common clock driver for Actions Semi SoCs.
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include "clk_owl.h"
+#include <asm/io.h>
+#if defined(CONFIG_MACH_S900)
+#include <asm/arch-owl/regs_s900.h>
+#include <dt-bindings/clock/actions,s900-cmu.h>
+#elif defined(CONFIG_MACH_S700)
+#include <asm/arch-owl/regs_s700.h>
+#include <dt-bindings/clock/actions,s700-cmu.h>
+#endif

drivers/clk/owl/clk_owl.c line 29

Quoted 10 lines
drivers/clk/owl/clk_owl.c new file +10 -0
+
+void owl_clk_init(struct owl_clk_priv *priv)
+{
+	u32 bus_clk = 0, core_pll, dev_pll;
+
+#if defined(CONFIG_MACH_S900)
+	/* Enable ASSIST_PLL */
+	setbits_le32(priv->base + CMU_ASSISTPLL, BIT(0));
+	udelay(PLL_STABILITY_WAIT_US);
+#endif

It'd be interesting to see how we can add support for S500 which is somewhat different with these configurations... Let's do that later.

Quoted 44 lines
drivers/clk/owl/clk_owl.c new file +44 -0
+
+	/* Source HOSC to DEV_CLK */
+	clrbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
+
+	/* Configure BUS_CLK */
+	bus_clk |= (CMU_PDBGDIV_DIV | CMU_PERDIV_DIV | CMU_NOCDIV_DIV |
+			CMU_DMMCLK_SRC | CMU_APBCLK_DIV | CMU_AHBCLK_DIV |
+			CMU_NOCCLK_SRC | CMU_CORECLK_HOSC);
+	writel(bus_clk, priv->base + CMU_BUSCLK);
+
+	udelay(PLL_STABILITY_WAIT_US);
+
+	/* Configure CORE_PLL */
+	core_pll = readl(priv->base + CMU_COREPLL);
+	core_pll |= (CMU_COREPLL_EN | CMU_COREPLL_HOSC_EN | CMU_COREPLL_OUT);
+	writel(core_pll, priv->base + CMU_COREPLL);
+
+	udelay(PLL_STABILITY_WAIT_US);
+
+	/* Configure DEV_PLL */
+	dev_pll = readl(priv->base + CMU_DEVPLL);
+	dev_pll |= (CMU_DEVPLL_EN | CMU_DEVPLL_OUT);
+	writel(dev_pll, priv->base + CMU_DEVPLL);
+
+	udelay(PLL_STABILITY_WAIT_US);
+
+	/* Source CORE_PLL for CORE_CLK */
+	clrsetbits_le32(priv->base + CMU_BUSCLK, CMU_CORECLK_MASK,
+			CMU_CORECLK_CPLL);
+
+	/* Source DEV_PLL for DEV_CLK */
+	setbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
+
+	udelay(PLL_STABILITY_WAIT_US);
+}
+
+void owl_uart_clk_enable(struct owl_clk_priv *priv)
+{
+	if (priv->soc == S900) {
+		/* Source HOSC for UART5 interface */
+		clrbits_le32(priv->base + CMU_UART5CLK, CMU_UARTCLK_SRC_DEVPLL);
+		/* Enable UART5 interface clock */
+		setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
+	} else if (priv->soc == S700) {

drivers/clk/owl/clk_owl.c line 83

Quoted 10 lines
drivers/clk/owl/clk_owl.c new file +10 -0
+		/* Source HOSC for UART3 interface */
+		clrbits_le32(priv->base + CMU_UART3CLK, CMU_UARTCLK_SRC_DEVPLL);
+		/* Enable UART3 interface clock */
+		setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3);
+	}
+}
+
+void owl_ether_clk_enable(struct owl_clk_priv *priv)
+{
+#if defined(CONFIG_MACH_S700)

Either use priv->soc or the guard throughout the driver. Please don't mix both.

Quoted 10 lines
drivers/clk/owl/clk_owl.c new file +10 -0
+	setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_ETH_S700);
+	setbits_le32(priv->base + CMU_ETHERNETPLL, 5);
+#endif
+}
+
+int owl_clk_enable(struct clk *clk)
+{
+	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
+
+	switch (clk->id) {

drivers/clk/owl/clk_owl.c line 103

Quoted 10 lines
drivers/clk/owl/clk_owl.c new file +10 -0
+	case CLK_UART5:
+	case CLK_UART3:
+		owl_uart_clk_enable(priv);
+		break;
+	case CLK_RMII_REF:
+	case CLK_ETHERNET:
+		owl_ether_clk_enable(priv);
+		break;
+	default:
+		return 0;

Why not return -EINVAL for default case?

Quoted 36 lines
drivers/clk/owl/clk_owl.c new file +36 -0
+	}
+
+	return 0;
+}
+
+int owl_clk_disable(struct clk *clk)
+{
+	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
+
+	if (priv->soc == S900) {
+		/* Disable UART5 interface clock */
+		clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
+	} else if (priv->soc == S700) {
+		/* Disable UART3 interface clock */
+		clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3);
+	}
+
+	return 0;
+}
+
+static int owl_clk_probe(struct udevice *dev)
+{
+	struct owl_clk_priv *priv = dev_get_priv(dev);
+
+	priv->base = dev_read_addr(dev);
+	if (priv->base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	/* setup necessary clocks */
+	owl_clk_init(priv);
+
+	return 0;
+}
+
+static const struct clk_ops owl_clk_ops = {
+	.enable = owl_clk_enable,

drivers/clk/owl/clk_owl.c line 149

Quoted 10 lines
drivers/clk/owl/clk_owl.c new file +10 -0
+	.disable = owl_clk_disable,
+};
+
+static const struct udevice_id owl_clk_ids[] = {
+#if defined(CONFIG_MACH_S900)
+	{ .compatible = "actions,s900-cmu", .data = S900 },
+#elif defined(CONFIG_MACH_S700)
+	{ .compatible = "actions,s700-cmu", .data = S700 },
+	{ }
+#endif

Guard is not necessary here.

Thanks,
Mani

Quoted 227 lines
drivers/clk/owl/clk_owl.c new file +10 -0
+};
+
+U_BOOT_DRIVER(clk_owl) = {
+	.name		= "clk_owl",
+	.id		= UCLASS_CLK,
+	.of_match	= owl_clk_ids,
+	.ops		= &owl_clk_ops,
+	.priv_auto_alloc_size = sizeof(struct owl_clk_priv),
+	.probe		= owl_clk_probe,
+};
drivers/clk/owl/clk_owl.h new file +65 -0
new file mode 100644
index 0000000..9a65091
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Actions Semi SoCs Clock Definitions
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+ *
+ */
+
+#ifndef _OWL_CLK_H_
+#define _OWL_CLK_H_
+
+#include <clk-uclass.h>
+
+enum owl_soc {
+	S700,
+	S900,
+};
+
+struct owl_clk_priv {
+	phys_addr_t base;
+	enum owl_soc soc;
+};
+
+/* BUSCLK register definitions */
+#define CMU_PDBGDIV_8		 7
+#define CMU_PDBGDIV_SHIFT	 26
+#define CMU_PDBGDIV_DIV		 (CMU_PDBGDIV_8 << CMU_PDBGDIV_SHIFT)
+#define CMU_PERDIV_8		 7
+#define CMU_PERDIV_SHIFT	 20
+#define CMU_PERDIV_DIV		 (CMU_PERDIV_8 << CMU_PERDIV_SHIFT)
+#define CMU_NOCDIV_2		 1
+#define CMU_NOCDIV_SHIFT	 19
+#define CMU_NOCDIV_DIV		 (CMU_NOCDIV_2 << CMU_NOCDIV_SHIFT)
+#define CMU_DMMCLK_SRC_APLL	 2
+#define CMU_DMMCLK_SRC_SHIFT	 10
+#define CMU_DMMCLK_SRC		 (CMU_DMMCLK_SRC_APLL << CMU_DMMCLK_SRC_SHIFT)
+#define CMU_APBCLK_DIV		 BIT(8)
+#define CMU_NOCCLK_SRC		 BIT(7)
+#define CMU_AHBCLK_DIV		 BIT(4)
+#define CMU_CORECLK_MASK	 3
+#define CMU_CORECLK_CPLL	 BIT(1)
+#define CMU_CORECLK_HOSC	 BIT(0)
+
+/* COREPLL register definitions */
+#define CMU_COREPLL_EN		 BIT(9)
+#define CMU_COREPLL_HOSC_EN	 BIT(8)
+#define CMU_COREPLL_OUT		 (1104 / 24)
+
+/* DEVPLL register definitions */
+#define CMU_DEVPLL_CLK		 BIT(12)
+#define CMU_DEVPLL_EN		 BIT(8)
+#define CMU_DEVPLL_OUT		 (660 / 6)
+
+/* UARTCLK register definitions */
+#define CMU_UARTCLK_SRC_DEVPLL	 BIT(16)
+
+#define PLL_STABILITY_WAIT_US	 50
+
+#define CMU_DEVCLKEN1_UART5	 BIT(21)
+#define CMU_DEVCLKEN1_UART3	 BIT(11)
+
+#define CMU_DEVCLKEN1_ETH_S700   BIT(23)
+
+#endif
drivers/clk/owl/clk_s900.c deleted +0 -137
deleted file mode 100644
index a7c15d2..0000000
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Actions Semi S900 clock driver
- *
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
- */
-
-#include <common.h>
-#include <dm.h>
-#include <asm/arch-owl/clk_s900.h>
-#include <asm/arch-owl/regs_s900.h>
-#include <asm/io.h>
-
-#include <dt-bindings/clock/s900_cmu.h>
-
-void owl_clk_init(struct owl_clk_priv *priv)
-{
-	u32 bus_clk = 0, core_pll, dev_pll;
-
-	/* Enable ASSIST_PLL */
-	setbits_le32(priv->base + CMU_ASSISTPLL, BIT(0));
-
-	udelay(PLL_STABILITY_WAIT_US);
-
-	/* Source HOSC to DEV_CLK */
-	clrbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
-
-	/* Configure BUS_CLK */
-	bus_clk |= (CMU_PDBGDIV_DIV | CMU_PERDIV_DIV | CMU_NOCDIV_DIV |
-			CMU_DMMCLK_SRC | CMU_APBCLK_DIV | CMU_AHBCLK_DIV |
-			CMU_NOCCLK_SRC | CMU_CORECLK_HOSC);
-	writel(bus_clk, priv->base + CMU_BUSCLK);
-
-	udelay(PLL_STABILITY_WAIT_US);
-
-	/* Configure CORE_PLL */
-	core_pll = readl(priv->base + CMU_COREPLL);
-	core_pll |= (CMU_COREPLL_EN | CMU_COREPLL_HOSC_EN | CMU_COREPLL_OUT);
-	writel(core_pll, priv->base + CMU_COREPLL);
-
-	udelay(PLL_STABILITY_WAIT_US);
-
-	/* Configure DEV_PLL */
-	dev_pll = readl(priv->base + CMU_DEVPLL);
-	dev_pll |= (CMU_DEVPLL_EN | CMU_DEVPLL_OUT);
-	writel(dev_pll, priv->base + CMU_DEVPLL);
-
-	udelay(PLL_STABILITY_WAIT_US);
-
-	/* Source CORE_PLL for CORE_CLK */
-	clrsetbits_le32(priv->base + CMU_BUSCLK, CMU_CORECLK_MASK,
-			CMU_CORECLK_CPLL);
-
-	/* Source DEV_PLL for DEV_CLK */
-	setbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
-
-	udelay(PLL_STABILITY_WAIT_US);
-}
-
-void owl_uart_clk_enable(struct owl_clk_priv *priv)
-{
-	/* Source HOSC for UART5 interface */
-	clrbits_le32(priv->base + CMU_UART5CLK, CMU_UARTCLK_SRC_DEVPLL);
-
-	/* Enable UART5 interface clock */
-	setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
-}
-
-void owl_uart_clk_disable(struct owl_clk_priv *priv)
-{
-	/* Disable UART5 interface clock */
-	clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
-}
-
-int owl_clk_enable(struct clk *clk)
-{
-	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
-
-	switch (clk->id) {
-	case CLOCK_UART5:
-		owl_uart_clk_enable(priv);
-		break;
-	default:
-		return 0;
-	}
-
-	return 0;
-}
-
-int owl_clk_disable(struct clk *clk)
-{
-	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
-
-	switch (clk->id) {
-	case CLOCK_UART5:
-		owl_uart_clk_disable(priv);
-		break;
-	default:
-		return 0;
-	}
-
-	return 0;
-}
-
-static int owl_clk_probe(struct udevice *dev)
-{
-	struct owl_clk_priv *priv = dev_get_priv(dev);
-
-	priv->base = dev_read_addr(dev);
-	if (priv->base == FDT_ADDR_T_NONE)
-		return -EINVAL;
-
-	/* setup necessary clocks */
-	owl_clk_init(priv);
-
-	return 0;
-}
-
-static struct clk_ops owl_clk_ops = {
-	.enable = owl_clk_enable,
-	.disable = owl_clk_disable,
-};
-
-static const struct udevice_id owl_clk_ids[] = {
-	{ .compatible = "actions,s900-cmu" },
-	{ }
-};
-
-U_BOOT_DRIVER(clk_owl) = {
-	.name		= "clk_s900",
-	.id		= UCLASS_CLK,
-	.of_match	= owl_clk_ids,
-	.ops		= &owl_clk_ops,
-	.priv_auto_alloc_size = sizeof(struct owl_clk_priv),
-	.probe		= owl_clk_probe,
-};
Signature · 1 line
2.7.4
author
#7 lore raw

PATCH v3 3/21 clk: actions: Add common clock driver

Hi,

Thanks for having a look.

Quoted 2 lines

Either use priv->soc or the guard throughout the driver. Please don't mix both.

But have used #ifdef guard only where it is really necessary and to keep implementation
clean used priv->soc.

Quoted 10 lines

drivers/clk/owl/clk_owl.c line 149

Quoted 8 lines
drivers/clk/owl/clk_owl.c new file +8 -0
+
+static const struct udevice_id owl_clk_ids[] = {
+#if defined(CONFIG_MACH_S900)
+     { .compatible = "actions,s900-cmu", .data = S900 },
+#elif defined(CONFIG_MACH_S700)
+     { .compatible = "actions,s700-cmu", .data = S700 },
+     { }
+#endif

Guard is not necessary here.

But this is something suggested by Andre in previous review round

"just protect the compatible strings below with MACH_S[79]00 ifdefs, so that both SoCs share the
file, but compile to different drivers supporting only one compatible (due to the different reg_sx00.h and the #ifdef protected parts)."

Thanks
Amit

#8 lore raw

PATCH v3 3/21 clk: actions: Add common clock driver

In reply to Manivannan Sadhasivam

On 23/02/2020 17:25, Manivannan Sadhasivam wrote:

Hi,

Quoted 302 lines · Amit Singh Tomar
Quoted 3 lines

This patch converts S900 clock driver to something common that can be used for other SoCs, for instance S700(few of clk registres are same).

registers

Quoted 180 lines

---
Changes since v2:
* Fixed the commit message.
* Checked for the clk->id.
* Added a .data member with SoC type.
* Removed #ifdefs from few places.
Changes since v1:
* Moved CLK and CLK_OWL symbols from defconfig to arch/arm/Kconfig.

---
 arch/arm/Kconfig                          |   2 +
 arch/arm/include/asm/arch-owl/clk_s900.h  |  57 -----------
 arch/arm/include/asm/arch-owl/regs_s700.h |  56 +++++++++++
 configs/bubblegum_96_defconfig            |   3 -
 drivers/clk/owl/Kconfig                   |   8 +-
 drivers/clk/owl/Makefile                  |   2 +-
 drivers/clk/owl/clk_owl.c                 | 159 ++++++++++++++++++++++++++++++
 drivers/clk/owl/clk_owl.h                 |  65 ++++++++++++
 drivers/clk/owl/clk_s900.c                | 137 -------------------------
 9 files changed, 285 insertions(+), 204 deletions(-)
 delete mode 100644 arch/arm/include/asm/arch-owl/clk_s900.h
 create mode 100644 arch/arm/include/asm/arch-owl/regs_s700.h
 create mode 100644 drivers/clk/owl/clk_owl.c
 create mode 100644 drivers/clk/owl/clk_owl.h
 delete mode 100644 drivers/clk/owl/clk_s900.c
arch/arm/Kconfig +2 -0
index 905118b..e6a9d32 100644
@@ -886,6 +886,8 @@ config ARCH_OWL
 	select DM
 	select DM_SERIAL
 	select OWL_SERIAL
+	select CLK
+	select CLK_OWL
 	select OF_CONTROL
 	imply CMD_DM
 
arch/arm/include/asm/arch-owl/clk_s900.h deleted +0 -57
deleted file mode 100644
index 88e88f7..0000000
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Actions Semi S900 Clock Definitions
- *
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
- *
- */
-
-#ifndef _OWL_CLK_S900_H_
-#define _OWL_CLK_S900_H_
-
-#include <clk-uclass.h>
-
-struct owl_clk_priv {
-	phys_addr_t base;
-};
-
-/* BUSCLK register definitions */
-#define CMU_PDBGDIV_8		7
-#define CMU_PDBGDIV_SHIFT	26
-#define CMU_PDBGDIV_DIV		(CMU_PDBGDIV_8 << CMU_PDBGDIV_SHIFT)
-#define CMU_PERDIV_8		7
-#define CMU_PERDIV_SHIFT	20
-#define CMU_PERDIV_DIV		(CMU_PERDIV_8 << CMU_PERDIV_SHIFT)
-#define CMU_NOCDIV_2		1
-#define CMU_NOCDIV_SHIFT	19
-#define CMU_NOCDIV_DIV		(CMU_NOCDIV_2 << CMU_NOCDIV_SHIFT)
-#define CMU_DMMCLK_SRC_APLL	2
-#define CMU_DMMCLK_SRC_SHIFT	10
-#define CMU_DMMCLK_SRC		(CMU_DMMCLK_SRC_APLL << CMU_DMMCLK_SRC_SHIFT)
-#define CMU_APBCLK_DIV		BIT(8)
-#define CMU_NOCCLK_SRC		BIT(7)
-#define CMU_AHBCLK_DIV		BIT(4)
-#define CMU_CORECLK_MASK	3
-#define CMU_CORECLK_CPLL	BIT(1)
-#define CMU_CORECLK_HOSC	BIT(0)
-
-/* COREPLL register definitions */
-#define CMU_COREPLL_EN		BIT(9)
-#define CMU_COREPLL_HOSC_EN	BIT(8)
-#define CMU_COREPLL_OUT		(1104 / 24)
-
-/* DEVPLL register definitions */
-#define CMU_DEVPLL_CLK		BIT(12)
-#define CMU_DEVPLL_EN		BIT(8)
-#define CMU_DEVPLL_OUT		(660 / 6)
-
-/* UARTCLK register definitions */
-#define CMU_UARTCLK_SRC_DEVPLL	BIT(16)
-
-/* DEVCLKEN1 register definitions */
-#define CMU_DEVCLKEN1_UART5	BIT(21)
-
-#define PLL_STABILITY_WAIT_US	50
-
-#endif
arch/arm/include/asm/arch-owl/regs_s700.h new file +56 -0
new file mode 100644
index 0000000..a0bd737
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Actions Semi S700 Register Definitions
+ *
+ */
+
+#ifndef _OWL_REGS_S700_H_
+#define _OWL_REGS_S700_H_
+
+#define CMU_COREPLL		(0x0000)
+#define CMU_DEVPLL		(0x0004)
+#define CMU_DDRPLL		(0x0008)
+#define CMU_NANDPLL		(0x000C)
+#define CMU_DISPLAYPLL		(0x0010)
+#define CMU_AUDIOPLL		(0x0014)
+#define CMU_TVOUTPLL		(0x0018)
+#define CMU_BUSCLK		(0x001C)
+#define CMU_SENSORCLK		(0x0020)
+#define CMU_LCDCLK		(0x0024)
+#define CMU_DSIPLLCLK		(0x0028)
+#define CMU_CSICLK		(0x002C)
+#define CMU_DECLK		(0x0030)
+#define CMU_SICLK		(0x0034)
+#define CMU_BUSCLK1		(0x0038)
+#define CMU_HDECLK		(0x003C)
+#define CMU_VDECLK		(0x0040)
+#define CMU_VCECLK		(0x0044)
+#define CMU_NANDCCLK		(0x004C)
+#define CMU_SD0CLK		(0x0050)
+#define CMU_SD1CLK		(0x0054)
+#define CMU_SD2CLK		(0x0058)
+#define CMU_UART0CLK		(0x005C)
+#define CMU_UART1CLK		(0x0060)
+#define CMU_UART2CLK		(0x0064)
+#define CMU_UART3CLK		(0x0068)
+#define CMU_UART4CLK		(0x006C)
+#define CMU_UART5CLK		(0x0070)
+#define CMU_UART6CLK		(0x0074)
+#define CMU_PWM0CLK		(0x0078)
+#define CMU_PWM1CLK		(0x007C)
+#define CMU_PWM2CLK		(0x0080)
+#define CMU_PWM3CLK		(0x0084)
+#define CMU_PWM4CLK		(0x0088)
+#define CMU_PWM5CLK		(0x008C)
+#define CMU_GPU3DCLK		(0x0090)
+#define CMU_CORECTL		(0x009C)
+#define CMU_DEVCLKEN0		(0x00A0)
+#define CMU_DEVCLKEN1		(0x00A4)
+#define CMU_DEVRST0		(0x00A8)
+#define CMU_DEVRST1		(0x00AC)
+#define CMU_USBPLL		(0x00B0)
+#define CMU_ETHERNETPLL		(0x00B4)
+#define CMU_CVBSPLL		(0x00B8)
+#define CMU_SSTSCLK		(0x00C0)
+
+#endif
configs/bubblegum_96_defconfig +0 -3
index 8c94def..e76e9a2 100644
@@ -17,6 +17,3 @@ CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIMER=y
 CONFIG_DEFAULT_DEVICE_TREE="bubblegum_96"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_CLK=y
-CONFIG_CLK_OWL=y
-CONFIG_CLK_S900=y
drivers/clk/owl/Kconfig +0 -0
index 661f198..b2582d3 100644

drivers/clk/owl/Kconfig config CLK_OWL · line 7

Quoted 6 lines
drivers/clk/owl/Kconfig +2 -1
@@ -3,10 +3,6 @@ config CLK_OWL
         depends on CLK && ARCH_OWL
         help
           Enable support for clock managemet unit present in Actions Semi
-	  OWL SoCs.
+	  S900/S700 SoCs.
+

It'd be good to keep the family name:

Enable support for clock managemet unit present in Actions Semi Owl series S900/S700 SoCs.

Quoted 40 lines
drivers/clk/owl/Kconfig +0 -5
-config CLK_S900
-        bool "Actions Semi S900 clock driver"
-        depends on CLK_OWL && ARM64
-        help
-          Enable support for the clocks in Actions Semi S900 SoC.
drivers/clk/owl/Makefile +1 -1
index 63ab573..5218b6b 100644
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-obj-$(CONFIG_CLK_S900) += clk_s900.o
+obj-$(CONFIG_CLK_OWL) += clk_owl.o
drivers/clk/owl/clk_owl.c new file +19 -0
new file mode 100644
index 0000000..050dd45
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Common clock driver for Actions Semi SoCs.
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include "clk_owl.h"
+#include <asm/io.h>
+#if defined(CONFIG_MACH_S900)
+#include <asm/arch-owl/regs_s900.h>
+#include <dt-bindings/clock/actions,s900-cmu.h>
+#elif defined(CONFIG_MACH_S700)
+#include <asm/arch-owl/regs_s700.h>
+#include <dt-bindings/clock/actions,s700-cmu.h>
+#endif

drivers/clk/owl/clk_owl.c line 29

Quoted 10 lines
drivers/clk/owl/clk_owl.c new file +10 -0
+
+void owl_clk_init(struct owl_clk_priv *priv)
+{
+	u32 bus_clk = 0, core_pll, dev_pll;
+
+#if defined(CONFIG_MACH_S900)
+	/* Enable ASSIST_PLL */
+	setbits_le32(priv->base + CMU_ASSISTPLL, BIT(0));
+	udelay(PLL_STABILITY_WAIT_US);
+#endif

It'd be interesting to see how we can add support for S500 which is somewhat different with these configurations... Let's do that later.

Quoted 49 lines
drivers/clk/owl/clk_owl.c new file +49 -0
+
+	/* Source HOSC to DEV_CLK */
+	clrbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
+
+	/* Configure BUS_CLK */
+	bus_clk |= (CMU_PDBGDIV_DIV | CMU_PERDIV_DIV | CMU_NOCDIV_DIV |
+			CMU_DMMCLK_SRC | CMU_APBCLK_DIV | CMU_AHBCLK_DIV |
+			CMU_NOCCLK_SRC | CMU_CORECLK_HOSC);
+	writel(bus_clk, priv->base + CMU_BUSCLK);
+
+	udelay(PLL_STABILITY_WAIT_US);
+
+	/* Configure CORE_PLL */
+	core_pll = readl(priv->base + CMU_COREPLL);
+	core_pll |= (CMU_COREPLL_EN | CMU_COREPLL_HOSC_EN | CMU_COREPLL_OUT);
+	writel(core_pll, priv->base + CMU_COREPLL);
+
+	udelay(PLL_STABILITY_WAIT_US);
+
+	/* Configure DEV_PLL */
+	dev_pll = readl(priv->base + CMU_DEVPLL);
+	dev_pll |= (CMU_DEVPLL_EN | CMU_DEVPLL_OUT);
+	writel(dev_pll, priv->base + CMU_DEVPLL);
+
+	udelay(PLL_STABILITY_WAIT_US);
+
+	/* Source CORE_PLL for CORE_CLK */
+	clrsetbits_le32(priv->base + CMU_BUSCLK, CMU_CORECLK_MASK,
+			CMU_CORECLK_CPLL);
+
+	/* Source DEV_PLL for DEV_CLK */
+	setbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
+
+	udelay(PLL_STABILITY_WAIT_US);
+}
+
+void owl_uart_clk_enable(struct owl_clk_priv *priv)
+{
+	if (priv->soc == S900) {
+		/* Source HOSC for UART5 interface */
+		clrbits_le32(priv->base + CMU_UART5CLK, CMU_UARTCLK_SRC_DEVPLL);
+		/* Enable UART5 interface clock */
+		setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
+	} else if (priv->soc == S700) {
+		/* Source HOSC for UART3 interface */
+		clrbits_le32(priv->base + CMU_UART3CLK, CMU_UARTCLK_SRC_DEVPLL);
+		/* Enable UART3 interface clock */
+		setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3);
+	}
Quoted 8 lines

drivers/clk/owl/clk_owl.c line 83

Quoted 5 lines
drivers/clk/owl/clk_owl.c new file +5 -0
+}
+
+void owl_ether_clk_enable(struct owl_clk_priv *priv)
+{
+#if defined(CONFIG_MACH_S700)

Either use priv->soc or the guard throughout the driver. Please don't mix both.

I think the idea is to use priv->soc wherever possible, but revert to the #ifdef guards where this affects SoC specific register offsets. This prevents us from dummy-defining CMU_DEVCLKEN1_ETH_S700 for the S900, for instance.

Quoted 64 lines
Quoted 11 lines
drivers/clk/owl/clk_owl.c new file +10 -0
+	setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_ETH_S700);
+	setbits_le32(priv->base + CMU_ETHERNETPLL, 5);
+#endif
+}
+
+int owl_clk_enable(struct clk *clk)
+{
+	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
+
+	switch (clk->id) {

drivers/clk/owl/clk_owl.c line 103

Quoted 10 lines
drivers/clk/owl/clk_owl.c new file +10 -0
+	case CLK_UART5:
+	case CLK_UART3:
+		owl_uart_clk_enable(priv);
+		break;
+	case CLK_RMII_REF:
+	case CLK_ETHERNET:
+		owl_ether_clk_enable(priv);
+		break;
+	default:
+		return 0;

Why not return -EINVAL for default case?

Quoted 40 lines
drivers/clk/owl/clk_owl.c new file +40 -0
+	}
+
+	return 0;
+}
+
+int owl_clk_disable(struct clk *clk)
+{
+	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
+
+	if (priv->soc == S900) {
+		/* Disable UART5 interface clock */
+		clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
+	} else if (priv->soc == S700) {
+		/* Disable UART3 interface clock */
+		clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3);
+	}
+
+	return 0;
+}
+
+static int owl_clk_probe(struct udevice *dev)
+{
+	struct owl_clk_priv *priv = dev_get_priv(dev);
+
+	priv->base = dev_read_addr(dev);
+	if (priv->base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	/* setup necessary clocks */
+	owl_clk_init(priv);
+
+	return 0;
+}
+
+static const struct clk_ops owl_clk_ops = {
+	.enable = owl_clk_enable,
+	.disable = owl_clk_disable,
+};
+
+static const struct udevice_id owl_clk_ids[] = {
Quoted 8 lines

drivers/clk/owl/clk_owl.c line 149

Quoted 6 lines
drivers/clk/owl/clk_owl.c new file +6 -0
+#if defined(CONFIG_MACH_S900)
+	{ .compatible = "actions,s900-cmu", .data = S900 },
+#elif defined(CONFIG_MACH_S700)
+	{ .compatible = "actions,s700-cmu", .data = S700 },
+	{ }
+#endif

Guard is not necessary here.

Indeed, but it's here to not give false impressions: Despite the joint code, the clock driver only works for one SoC at a time. Having only that one respective compatible string in here makes this obvious.

The main reason for this approach is that the register offsets are quite different, dissecting this at runtime does not sound worthwhile for just those few clocks that we need. So the idea was to go with one source file, to make use of the commonalities of the clocks, but use #ifdef guards where needed.

This admittedly starts to look quite messy. And with the Ethernet clocks in it is probably already at a point where proper separation would be better.

So to make this easier: Amit, can you remove the Ethernet clocks from this patch, and add them later in your Ethernet series? Maybe this buys us some time to refactor this meanwhile?

Cheers,
Andre

Quoted 227 lines
Quoted 227 lines
drivers/clk/owl/clk_owl.c new file +10 -0
+};
+
+U_BOOT_DRIVER(clk_owl) = {
+	.name		= "clk_owl",
+	.id		= UCLASS_CLK,
+	.of_match	= owl_clk_ids,
+	.ops		= &owl_clk_ops,
+	.priv_auto_alloc_size = sizeof(struct owl_clk_priv),
+	.probe		= owl_clk_probe,
+};
drivers/clk/owl/clk_owl.h new file +65 -0
new file mode 100644
index 0000000..9a65091
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Actions Semi SoCs Clock Definitions
+ *
+ * Copyright (C) 2015 Actions Semi Co., Ltd.
+ * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+ *
+ */
+
+#ifndef _OWL_CLK_H_
+#define _OWL_CLK_H_
+
+#include <clk-uclass.h>
+
+enum owl_soc {
+	S700,
+	S900,
+};
+
+struct owl_clk_priv {
+	phys_addr_t base;
+	enum owl_soc soc;
+};
+
+/* BUSCLK register definitions */
+#define CMU_PDBGDIV_8		 7
+#define CMU_PDBGDIV_SHIFT	 26
+#define CMU_PDBGDIV_DIV		 (CMU_PDBGDIV_8 << CMU_PDBGDIV_SHIFT)
+#define CMU_PERDIV_8		 7
+#define CMU_PERDIV_SHIFT	 20
+#define CMU_PERDIV_DIV		 (CMU_PERDIV_8 << CMU_PERDIV_SHIFT)
+#define CMU_NOCDIV_2		 1
+#define CMU_NOCDIV_SHIFT	 19
+#define CMU_NOCDIV_DIV		 (CMU_NOCDIV_2 << CMU_NOCDIV_SHIFT)
+#define CMU_DMMCLK_SRC_APLL	 2
+#define CMU_DMMCLK_SRC_SHIFT	 10
+#define CMU_DMMCLK_SRC		 (CMU_DMMCLK_SRC_APLL << CMU_DMMCLK_SRC_SHIFT)
+#define CMU_APBCLK_DIV		 BIT(8)
+#define CMU_NOCCLK_SRC		 BIT(7)
+#define CMU_AHBCLK_DIV		 BIT(4)
+#define CMU_CORECLK_MASK	 3
+#define CMU_CORECLK_CPLL	 BIT(1)
+#define CMU_CORECLK_HOSC	 BIT(0)
+
+/* COREPLL register definitions */
+#define CMU_COREPLL_EN		 BIT(9)
+#define CMU_COREPLL_HOSC_EN	 BIT(8)
+#define CMU_COREPLL_OUT		 (1104 / 24)
+
+/* DEVPLL register definitions */
+#define CMU_DEVPLL_CLK		 BIT(12)
+#define CMU_DEVPLL_EN		 BIT(8)
+#define CMU_DEVPLL_OUT		 (660 / 6)
+
+/* UARTCLK register definitions */
+#define CMU_UARTCLK_SRC_DEVPLL	 BIT(16)
+
+#define PLL_STABILITY_WAIT_US	 50
+
+#define CMU_DEVCLKEN1_UART5	 BIT(21)
+#define CMU_DEVCLKEN1_UART3	 BIT(11)
+
+#define CMU_DEVCLKEN1_ETH_S700   BIT(23)
+
+#endif
drivers/clk/owl/clk_s900.c deleted +0 -137
deleted file mode 100644
index a7c15d2..0000000
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Actions Semi S900 clock driver
- *
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
- */
-
-#include <common.h>
-#include <dm.h>
-#include <asm/arch-owl/clk_s900.h>
-#include <asm/arch-owl/regs_s900.h>
-#include <asm/io.h>
-
-#include <dt-bindings/clock/s900_cmu.h>
-
-void owl_clk_init(struct owl_clk_priv *priv)
-{
-	u32 bus_clk = 0, core_pll, dev_pll;
-
-	/* Enable ASSIST_PLL */
-	setbits_le32(priv->base + CMU_ASSISTPLL, BIT(0));
-
-	udelay(PLL_STABILITY_WAIT_US);
-
-	/* Source HOSC to DEV_CLK */
-	clrbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
-
-	/* Configure BUS_CLK */
-	bus_clk |= (CMU_PDBGDIV_DIV | CMU_PERDIV_DIV | CMU_NOCDIV_DIV |
-			CMU_DMMCLK_SRC | CMU_APBCLK_DIV | CMU_AHBCLK_DIV |
-			CMU_NOCCLK_SRC | CMU_CORECLK_HOSC);
-	writel(bus_clk, priv->base + CMU_BUSCLK);
-
-	udelay(PLL_STABILITY_WAIT_US);
-
-	/* Configure CORE_PLL */
-	core_pll = readl(priv->base + CMU_COREPLL);
-	core_pll |= (CMU_COREPLL_EN | CMU_COREPLL_HOSC_EN | CMU_COREPLL_OUT);
-	writel(core_pll, priv->base + CMU_COREPLL);
-
-	udelay(PLL_STABILITY_WAIT_US);
-
-	/* Configure DEV_PLL */
-	dev_pll = readl(priv->base + CMU_DEVPLL);
-	dev_pll |= (CMU_DEVPLL_EN | CMU_DEVPLL_OUT);
-	writel(dev_pll, priv->base + CMU_DEVPLL);
-
-	udelay(PLL_STABILITY_WAIT_US);
-
-	/* Source CORE_PLL for CORE_CLK */
-	clrsetbits_le32(priv->base + CMU_BUSCLK, CMU_CORECLK_MASK,
-			CMU_CORECLK_CPLL);
-
-	/* Source DEV_PLL for DEV_CLK */
-	setbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK);
-
-	udelay(PLL_STABILITY_WAIT_US);
-}
-
-void owl_uart_clk_enable(struct owl_clk_priv *priv)
-{
-	/* Source HOSC for UART5 interface */
-	clrbits_le32(priv->base + CMU_UART5CLK, CMU_UARTCLK_SRC_DEVPLL);
-
-	/* Enable UART5 interface clock */
-	setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
-}
-
-void owl_uart_clk_disable(struct owl_clk_priv *priv)
-{
-	/* Disable UART5 interface clock */
-	clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5);
-}
-
-int owl_clk_enable(struct clk *clk)
-{
-	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
-
-	switch (clk->id) {
-	case CLOCK_UART5:
-		owl_uart_clk_enable(priv);
-		break;
-	default:
-		return 0;
-	}
-
-	return 0;
-}
-
-int owl_clk_disable(struct clk *clk)
-{
-	struct owl_clk_priv *priv = dev_get_priv(clk->dev);
-
-	switch (clk->id) {
-	case CLOCK_UART5:
-		owl_uart_clk_disable(priv);
-		break;
-	default:
-		return 0;
-	}
-
-	return 0;
-}
-
-static int owl_clk_probe(struct udevice *dev)
-{
-	struct owl_clk_priv *priv = dev_get_priv(dev);
-
-	priv->base = dev_read_addr(dev);
-	if (priv->base == FDT_ADDR_T_NONE)
-		return -EINVAL;
-
-	/* setup necessary clocks */
-	owl_clk_init(priv);
-
-	return 0;
-}
-
-static struct clk_ops owl_clk_ops = {
-	.enable = owl_clk_enable,
-	.disable = owl_clk_disable,
-};
-
-static const struct udevice_id owl_clk_ids[] = {
-	{ .compatible = "actions,s900-cmu" },
-	{ }
-};
-
-U_BOOT_DRIVER(clk_owl) = {
-	.name		= "clk_s900",
-	.id		= UCLASS_CLK,
-	.of_match	= owl_clk_ids,
-	.ops		= &owl_clk_ops,
-	.priv_auto_alloc_size = sizeof(struct owl_clk_priv),
-	.probe		= owl_clk_probe,
-};
Signature · 1 line
2.7.4
author
#9 lore raw

PATCH v3 3/21 clk: actions: Add common clock driver

Hi,

Quoted 8 lines

Indeed, but it's here to not give false impressions: Despite the joint code, the clock driver only works for one SoC at a time. Having only that one respective compatible string in here makes this obvious.

The main reason for this approach is that the register offsets are quite different, dissecting this at runtime does not sound worthwhile for just those few clocks that we need. So the idea was to go with one source file, to make use of the commonalities of the clocks, but use #ifdef guards where needed.

This admittedly starts to look quite messy. And with the Ethernet clocks in it is probably already at a point where proper separation would be better.

So to make this easier: Amit, can you remove the Ethernet clocks from this patch, and add them later in your Ethernet series? Maybe this buys us some time to refactor this meanwhile?

Already have taken care of it here:
https://github.com/Atomar25/u-boot/commit/7721ce67d601945b5883fcfa3157207d67c95b1b#diff-0bbc60147217c87a2656365e222cb7b3R81

Thanks
-Amit

#10 lore raw

PATCH v3 4/21 arm: add support Actions Semi S700

In reply to Amit Singh Tomar

This patch adds basic support for Actions Semi based S700 SoC, which is driven by common owl framework.

---
Changes since v2:
* Fixed the commit message.
* Checked for the clk->id.
* Added a .data member with SoC type.
* Removed #ifdefs from few places.
Changes since v1:
* Moved CLK and CLK_OWL symbols from defconfig to arch/arm/Kconfig.

---
 arch/arm/mach-owl/Kconfig |  6 ++++++
 include/configs/s700.h    | 13 +++++++++++++
 2 files changed, 19 insertions(+)
 create mode 100644 include/configs/s700.h
arch/arm/mach-owl/Kconfig +6 -0
index 28f6121..4d85b37 100644
@@ -8,6 +8,10 @@ config MACH_S900
         bool "Actions Semi S900"
         select ARM64
 
+config MACH_S700
+        bool "Actions Semi S700"
+        select ARM64
+
 endchoice
 
 config SYS_TEXT_BASE
@@ -15,8 +19,10 @@ config SYS_TEXT_BASE
 
 config SYS_CONFIG_NAME
         default "s900" if MACH_S900
+        default "s700" if MACH_S700
 
 config SYS_SOC
         default "s900" if MACH_S900
+        default "s700" if MACH_S700
 
 endif
include/configs/s700.h new file +13 -0
new file mode 100644
index 0000000..fab0d04
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ */
+
+#ifndef _CONFIG_S700_H_
+#define _CONFIG_S700_H_
+
+/*
+ * Include common owl configuration where most the settings are
+ */
+#include <configs/owl-common.h>
+
+#endif
Signature · 1 line
2.7.4
#11 lore raw

PATCH v3 4/21 arm: add support Actions Semi S700

Quoted 23 lines · Amit Singh Tomar

This patch adds basic support for Actions Semi based S700 SoC, which is driven by common owl framework.

---
Changes since v2:
* Fixed the commit message.
* Checked for the clk->id.
* Added a .data member with SoC type.
* Removed #ifdefs from few places.
Changes since v1:
* Moved CLK and CLK_OWL symbols from defconfig to arch/arm/Kconfig.

---
 arch/arm/mach-owl/Kconfig |  6 ++++++
 include/configs/s700.h    | 13 +++++++++++++
 2 files changed, 19 insertions(+)
 create mode 100644 include/configs/s700.h
arch/arm/mach-owl/Kconfig +0 -0
index 28f6121..4d85b37 100644

arch/arm/mach-owl/Kconfig config MACH_S900 · line 12

Quoted 5 lines
arch/arm/mach-owl/Kconfig +2 -0
@@ -8,6 +8,10 @@ config MACH_S900
         bool "Actions Semi S900"
         select ARM64
 
+config MACH_S700
+        bool "Actions Semi S700"

Actions Semi S700 SoC. Same for S900.

Thanks,
Mani

Quoted 38 lines
arch/arm/mach-owl/Kconfig +4 -0
+        select ARM64
+
 endchoice
 
 config SYS_TEXT_BASE
@@ -15,8 +19,10 @@ config SYS_TEXT_BASE
 
 config SYS_CONFIG_NAME
         default "s900" if MACH_S900
+        default "s700" if MACH_S700
 
 config SYS_SOC
         default "s900" if MACH_S900
+        default "s700" if MACH_S700
 
 endif
include/configs/s700.h new file +13 -0
new file mode 100644
index 0000000..fab0d04
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ */
+
+#ifndef _CONFIG_S700_H_
+#define _CONFIG_S700_H_
+
+/*
+ * Include common owl configuration where most the settings are
+ */
+#include <configs/owl-common.h>
+
+#endif
Signature · 1 line
2.7.4
#12 lore raw

PATCH v3 5/21 arm: actions: add S700 SoC device tree

In reply to Amit Singh Tomar

This patch adds .dtsi file(sync with Linux 5.5) and required binding for S700 SoC that is a 64-bit Quad-core ARM Cortex-A53 cores.

---
Changes since v2:
* Synced DTS bindings with Linux 5.5.
Changes since v1:
* Moved the u-boot specific changes to s700-u-boot.dtsi, now s700.dtsi is in complete sync with Linux 4.20.

---
 arch/arm/dts/Makefile                          |   6 +-
 arch/arm/dts/s700.dtsi                         | 248 +++++++++++++++++++++++++
 include/dt-bindings/clock/actions,s700-cmu.h   | 118 ++++++++++++
 include/dt-bindings/reset/actions,s700-reset.h |  34 ++++
 4 files changed, 404 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/dts/s700.dtsi
 create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h
 create mode 100644 include/dt-bindings/reset/actions,s700-reset.h
arch/arm/dts/Makefile +4 -2
index b48b05f..0ad14fb 100644
@@ -64,8 +64,10 @@ dtb-$(CONFIG_KIRKWOOD) += \
 	kirkwood-pogo_e02.dtb \
 	kirkwood-sheevaplug.dtb
 
-dtb-$(CONFIG_ARCH_OWL) += \
-	bubblegum_96.dtb
+dtb-$(CONFIG_MACH_S900) += \
+        bubblegum_96.dtb
+dtb-$(CONFIG_MACH_S700) += \
+        s700-cubieboard7.dtb
 
 dtb-$(CONFIG_ROCKCHIP_PX30) += \
 	px30-evb.dtb \
arch/arm/dts/s700.dtsi new file +248 -0

248 lines not on this page · raw message

include/dt-bindings/clock/actions,s700-cmu.h new file +118 -0

118 lines not on this page · raw message

include/dt-bindings/reset/actions,s700-reset.h new file +34 -0
new file mode 100644
index 0000000..5e3b16b
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+//
+// Device Tree binding constants for Actions Semi S700 Reset Management Unit
+//
+// Copyright (c) 2018 Linaro Ltd.
+
+#ifndef __DT_BINDINGS_ACTIONS_S700_RESET_H
+#define __DT_BINDINGS_ACTIONS_S700_RESET_H
+
+#define RESET_AUDIO				0
+#define RESET_CSI				1
+#define RESET_DE				2
+#define RESET_DSI				3
+#define RESET_GPIO				4
+#define RESET_I2C0				5
+#define RESET_I2C1				6
+#define RESET_I2C2				7
+#define RESET_I2C3				8
+#define RESET_KEY				9
+#define RESET_LCD0				10
+#define RESET_SI				11
+#define RESET_SPI0				12
+#define RESET_SPI1				13
+#define RESET_SPI2				14
+#define RESET_SPI3				15
+#define RESET_UART0				16
+#define RESET_UART1				17
+#define RESET_UART2				18
+#define RESET_UART3				19
+#define RESET_UART4				20
+#define RESET_UART5				21
+#define RESET_UART6				22
+
+#endif /* __DT_BINDINGS_ACTIONS_S700_RESET_H */
Signature · 1 line
2.7.4
#13 lore raw

PATCH v3 5/21 arm: actions: add S700 SoC device tree

Quoted 3 lines · Amit Singh Tomar

This patch adds .dtsi file(sync with Linux 5.5) and required binding for S700 SoC that is a 64-bit Quad-core ARM Cortex-A53 cores.

You are importing from Linux kernel, right? Why not mention that?

Quoted 22 lines

---
Changes since v2:
* Synced DTS bindings with Linux 5.5.
Changes since v1:
* Moved the u-boot specific changes to s700-u-boot.dtsi, now s700.dtsi is in complete sync with Linux 4.20.

---
 arch/arm/dts/Makefile                          |   6 +-
 arch/arm/dts/s700.dtsi                         | 248 +++++++++++++++++++++++++
 include/dt-bindings/clock/actions,s700-cmu.h   | 118 ++++++++++++
 include/dt-bindings/reset/actions,s700-reset.h |  34 ++++
 4 files changed, 404 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/dts/s700.dtsi
 create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h
 create mode 100644 include/dt-bindings/reset/actions,s700-reset.h
arch/arm/dts/Makefile +0 -0
index b48b05f..0ad14fb 100644

arch/arm/dts/Makefile dtb-$(CONFIG_KIRKWOOD) += \ · line 68

Quoted 7 lines
arch/arm/dts/Makefile +2 -2
@@ -64,8 +64,10 @@ dtb-$(CONFIG_KIRKWOOD) += \
 	kirkwood-pogo_e02.dtb \
 	kirkwood-sheevaplug.dtb
 
-dtb-$(CONFIG_ARCH_OWL) += \
-	bubblegum_96.dtb
+dtb-$(CONFIG_MACH_S900) += \
+        bubblegum_96.dtb

Commit message doesn't mention this change

Thanks,
Mani

Quoted 426 lines
arch/arm/dts/Makefile +2 -0
+dtb-$(CONFIG_MACH_S700) += \
+        s700-cubieboard7.dtb
 
 dtb-$(CONFIG_ROCKCHIP_PX30) += \
 	px30-evb.dtb \
arch/arm/dts/s700.dtsi new file +248 -0
new file mode 100644
index 0000000..2006ad5
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas F?rber
+ */
+
+#include <dt-bindings/clock/actions,s700-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/actions,s700-reset.h>
+
+/ {
+	compatible = "actions,s700";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu at 2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu at 3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon at 1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller at e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial at e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial at e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial at e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial at e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial at e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial at e012a000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial at e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		cmu: clock-controller at e0168000 {
+			compatible = "actions,s700-cmu";
+			reg = <0x0 0xe0168000 0x0 0x1000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c at e0170000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe0170000 0 0x1000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c at e0174000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe0174000 0 0x1000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c at e0178000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe0178000 0 0x1000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c at e017c000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe017c000 0 0x1000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sps: power-controller at e01b0100 {
+			compatible = "actions,s700-sps";
+			reg = <0x0 0xe01b0100 0x0 0x100>;
+			#power-domain-cells = <1>;
+		};
+
+		timer: timer at e024c000 {
+			compatible = "actions,s700-timer";
+			reg = <0x0 0xe024c000 0x0 0x4000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+
+		pinctrl: pinctrl at e01b0000 {
+			compatible = "actions,s700-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 136>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
include/dt-bindings/clock/actions,s700-cmu.h new file +118 -0
new file mode 100644
index 0000000..3e19429
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Device Tree binding constants for Actions Semi S700 Clock Management Unit
+ *
+ * Copyright (c) 2014 Actions Semi Inc.
+ * Author: David Liu <[email protected]>
+ *
+ * Author: Pathiban Nallathambi <[email protected]>
+ * Author: Saravanan Sekar <[email protected]>
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_S700_H
+#define __DT_BINDINGS_CLOCK_S700_H
+
+#define CLK_NONE			0
+
+/* pll clocks */
+#define CLK_CORE_PLL			1
+#define CLK_DEV_PLL			2
+#define CLK_DDR_PLL			3
+#define CLK_NAND_PLL			4
+#define CLK_DISPLAY_PLL			5
+#define CLK_TVOUT_PLL			6
+#define CLK_CVBS_PLL			7
+#define CLK_AUDIO_PLL			8
+#define CLK_ETHERNET_PLL		9
+
+/* system clock */
+#define CLK_CPU				10
+#define CLK_DEV				11
+#define CLK_AHB				12
+#define CLK_APB				13
+#define CLK_DMAC			14
+#define CLK_NOC0_CLK_MUX		15
+#define CLK_NOC1_CLK_MUX		16
+#define CLK_HP_CLK_MUX			17
+#define CLK_HP_CLK_DIV			18
+#define CLK_NOC1_CLK_DIV		19
+#define CLK_NOC0			20
+#define CLK_NOC1			21
+#define CLK_SENOR_SRC			22
+
+/* peripheral device clock */
+#define CLK_GPIO			23
+#define CLK_TIMER			24
+#define CLK_DSI				25
+#define CLK_CSI				26
+#define CLK_SI				27
+#define CLK_DE				28
+#define CLK_HDE				29
+#define CLK_VDE				30
+#define CLK_VCE				31
+#define CLK_NAND			32
+#define CLK_SD0				33
+#define CLK_SD1				34
+#define CLK_SD2				35
+
+#define CLK_UART0			36
+#define CLK_UART1			37
+#define CLK_UART2			38
+#define CLK_UART3			39
+#define CLK_UART4			40
+#define CLK_UART5			41
+#define CLK_UART6			42
+
+#define CLK_PWM0			43
+#define CLK_PWM1			44
+#define CLK_PWM2			45
+#define CLK_PWM3			46
+#define CLK_PWM4			47
+#define CLK_PWM5			48
+#define CLK_GPU3D			49
+
+#define CLK_I2C0			50
+#define CLK_I2C1			51
+#define CLK_I2C2			52
+#define CLK_I2C3			53
+
+#define CLK_SPI0			54
+#define CLK_SPI1			55
+#define CLK_SPI2			56
+#define CLK_SPI3			57
+
+#define CLK_USB3_480MPLL0		58
+#define CLK_USB3_480MPHY0		59
+#define CLK_USB3_5GPHY			60
+#define CLK_USB3_CCE			61
+#define CLK_USB3_MAC			62
+
+#define CLK_LCD				63
+#define CLK_HDMI_AUDIO			64
+#define CLK_I2SRX			65
+#define CLK_I2STX			66
+
+#define CLK_SENSOR0			67
+#define CLK_SENSOR1			68
+
+#define CLK_HDMI_DEV			69
+
+#define CLK_ETHERNET			70
+#define CLK_RMII_REF			71
+
+#define CLK_USB2H0_PLLEN		72
+#define CLK_USB2H0_PHY			73
+#define CLK_USB2H0_CCE			74
+#define CLK_USB2H1_PLLEN		75
+#define CLK_USB2H1_PHY			76
+#define CLK_USB2H1_CCE			77
+
+#define CLK_TVOUT			78
+
+#define CLK_THERMAL_SENSOR		79
+
+#define CLK_IRC_SWITCH			80
+#define CLK_PCM1			81
+#define CLK_NR_CLKS			(CLK_PCM1 + 1)
+
+#endif /* __DT_BINDINGS_CLOCK_S700_H */
include/dt-bindings/reset/actions,s700-reset.h new file +34 -0
new file mode 100644
index 0000000..5e3b16b
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+//
+// Device Tree binding constants for Actions Semi S700 Reset Management Unit
+//
+// Copyright (c) 2018 Linaro Ltd.
+
+#ifndef __DT_BINDINGS_ACTIONS_S700_RESET_H
+#define __DT_BINDINGS_ACTIONS_S700_RESET_H
+
+#define RESET_AUDIO				0
+#define RESET_CSI				1
+#define RESET_DE				2
+#define RESET_DSI				3
+#define RESET_GPIO				4
+#define RESET_I2C0				5
+#define RESET_I2C1				6
+#define RESET_I2C2				7
+#define RESET_I2C3				8
+#define RESET_KEY				9
+#define RESET_LCD0				10
+#define RESET_SI				11
+#define RESET_SPI0				12
+#define RESET_SPI1				13
+#define RESET_SPI2				14
+#define RESET_SPI3				15
+#define RESET_UART0				16
+#define RESET_UART1				17
+#define RESET_UART2				18
+#define RESET_UART3				19
+#define RESET_UART4				20
+#define RESET_UART5				21
+#define RESET_UART6				22
+
+#endif /* __DT_BINDINGS_ACTIONS_S700_RESET_H */
Signature · 1 line
2.7.4
#14 lore raw

PATCH v3 6/21 actions:s700: add u-boot specific dts file

In reply to Amit Singh Tomar

Devices like uart and clk are needed to be enabled before relocation. this patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.

---
Changes since v2:
* Added License.
Changes since v1:
* This is newly added file that was *not* present in v1 and contains u-boot specific changes.

---
 arch/arm/dts/s700-u-boot.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 arch/arm/dts/s700-u-boot.dtsi
arch/arm/dts/s700-u-boot.dtsi new file +18 -0
new file mode 100644
index 0000000..a527ccc
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Amit Singh Tomar <[email protected]>
+ */
+
+/{
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart3 {
+	u-boot,dm-pre-reloc;
+};
+
+&cmu {
+	u-boot,dm-pre-reloc;
+};
Signature · 1 line
2.7.4
#15 lore raw

PATCH v3 6/21 actions:s700: add u-boot specific dts file

Quoted 21 lines · Amit Singh Tomar

Devices like uart and clk are needed to be enabled before relocation. this patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.

---
Changes since v2:
* Added License.
Changes since v1:
* This is newly added file that was *not* present in v1 and contains u-boot specific changes.

---
 arch/arm/dts/s700-u-boot.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 arch/arm/dts/s700-u-boot.dtsi
arch/arm/dts/s700-u-boot.dtsi new file +0 -0
new file mode 100644
index 0000000..a527ccc

arch/arm/dts/s700-u-boot.dtsi line 8

Quoted 8 lines
arch/arm/dts/s700-u-boot.dtsi new file +8 -0
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Amit Singh Tomar <[email protected]>
+ */
+
+/{
+	soc {
+		u-boot,dm-pre-reloc;

What is this for?

Thanks,
Mani

Quoted 13 lines
arch/arm/dts/s700-u-boot.dtsi new file +10 -0
+	};
+};
+
+&uart3 {
+	u-boot,dm-pre-reloc;
+};
+
+&cmu {
+	u-boot,dm-pre-reloc;
+};
Signature · 1 line
2.7.4
#16 lore raw

PATCH v3 7/21 arm: dts: sync dts for Action Semi S900

In reply to Amit Singh Tomar

Synchronize device tree bindings with v5.5-rc6 tag with commit id "b3a987b".

Also, it removes older clock binding defined for S900.

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 arch/arm/dts/s900.dtsi                         | 322 +++++++++++++++++++++++--
 include/dt-bindings/clock/actions,s900-cmu.h   | 129 ++++++++++
 include/dt-bindings/clock/s900_cmu.h           |  77 ------
 include/dt-bindings/reset/actions,s900-reset.h |  65 +++++
 4 files changed, 495 insertions(+), 98 deletions(-)
 create mode 100644 include/dt-bindings/clock/actions,s900-cmu.h
 delete mode 100644 include/dt-bindings/clock/s900_cmu.h
 create mode 100644 include/dt-bindings/reset/actions,s900-reset.h
arch/arm/dts/s900.dtsi +301 -21
index 2bbb30a..eb35cf7 100644
@@ -1,17 +1,94 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Device Tree Source for Actions Semi S900 SoC
-//
-// Copyright (C) 2015 Actions Semi Co., Ltd.
-// Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
 
-/dts-v1/;
-#include <dt-bindings/clock/s900_cmu.h>
+#include <dt-bindings/clock/actions,s900-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/actions,s900-reset.h>
 
 / {
 	compatible = "actions,s900";
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu at 2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu at 3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon at 1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
 
 	losc: losc {
 		compatible = "fixed-clock";
@@ -26,28 +103,231 @@
 	};
 
 	soc {
-		u-boot,dm-pre-reloc;
 		compatible = "simple-bus";
-		#address-cells = <0x2>;
-		#size-cells = <0x2>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 
+		gic: interrupt-controller at e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial at e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial at e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial at e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial at e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial at e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		uart5: serial at e012a000 {
-			u-boot,dm-pre-reloc;
-			compatible = "actions,s900-serial";
-			reg = <0x0 0xe012a000 0x0 0x1000>;
-			clocks = <&cmu CLOCK_UART5>;
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
+		uart6: serial at e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sps: power-controller at e012e000 {
+			compatible = "actions,s900-sps";
+			reg = <0x0 0xe012e000 0x0 0x2000>;
+			#power-domain-cells = <1>;
+		};
+
 		cmu: clock-controller at e0160000 {
-			u-boot,dm-pre-reloc;
 			compatible = "actions,s900-cmu";
 			reg = <0x0 0xe0160000 0x0 0x1000>;
-			clocks = <&losc>, <&diff24M>;
-			clock-names = "losc", "diff24M";
+			clocks = <&hosc>, <&losc>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c at e0170000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0170000 0 0x1000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c at e0172000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0172000 0 0x1000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c at e0174000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0174000 0 0x1000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c at e0176000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0176000 0 0x1000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c at e0178000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0178000 0 0x1000>;
+			clocks = <&cmu CLK_I2C4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c at e017a000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe017a000 0 0x1000>;
+			clocks = <&cmu CLK_I2C5>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl at e01b0000 {
+			compatible = "actions,s900-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer: timer at e0228000 {
+			compatible = "actions,s900-timer";
+			reg = <0x0 0xe0228000 0x0 0x8000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+
+		dma: dma-controller at e0260000 {
+			compatible = "actions,s900-dma";
+			reg = <0x0 0xe0260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <12>;
+			dma-requests = <46>;
+			clocks = <&cmu CLK_DMAC>;
+		};
+
+		mmc0: mmc at e0330000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0330000 0x0 0x4000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc at e0334000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0334000 0x0 0x4000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc at e0338000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0338000 0x0 0x4000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc3: mmc at e033c000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe033c000 0x0 0x4000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD3>;
+			resets = <&cmu RESET_SD3>;
+			dmas = <&dma 46>;
+			dma-names = "mmc";
+			status = "disabled";
 		};
 	};
 };
-
include/dt-bindings/clock/actions,s900-cmu.h new file +129 -0

129 lines not on this page · raw message

include/dt-bindings/clock/s900_cmu.h deleted +0 -77

77 lines not on this page · raw message

include/dt-bindings/reset/actions,s900-reset.h new file +65 -0

65 lines not on this page · raw message

Signature · 1 line
2.7.4
#17 lore raw

PATCH v3 7/21 arm: dts: sync dts for Action Semi S900

Quoted 6 lines · Amit Singh Tomar

Synchronize device tree bindings with v5.5-rc6 tag with commit id "b3a987b".

Also, it removes older clock binding defined for S900.

Thanks,
Mani

Quoted 657 lines

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 arch/arm/dts/s900.dtsi                         | 322 +++++++++++++++++++++++--
 include/dt-bindings/clock/actions,s900-cmu.h   | 129 ++++++++++
 include/dt-bindings/clock/s900_cmu.h           |  77 ------
 include/dt-bindings/reset/actions,s900-reset.h |  65 +++++
 4 files changed, 495 insertions(+), 98 deletions(-)
 create mode 100644 include/dt-bindings/clock/actions,s900-cmu.h
 delete mode 100644 include/dt-bindings/clock/s900_cmu.h
 create mode 100644 include/dt-bindings/reset/actions,s900-reset.h
arch/arm/dts/s900.dtsi +301 -21
index 2bbb30a..eb35cf7 100644
@@ -1,17 +1,94 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Device Tree Source for Actions Semi S900 SoC
-//
-// Copyright (C) 2015 Actions Semi Co., Ltd.
-// Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas F?rber
+ */
 
-/dts-v1/;
-#include <dt-bindings/clock/s900_cmu.h>
+#include <dt-bindings/clock/actions,s900-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/actions,s900-reset.h>
 
 / {
 	compatible = "actions,s900";
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu at 2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu at 3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon at 1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
 
 	losc: losc {
 		compatible = "fixed-clock";
@@ -26,28 +103,231 @@
 	};
 
 	soc {
-		u-boot,dm-pre-reloc;
 		compatible = "simple-bus";
-		#address-cells = <0x2>;
-		#size-cells = <0x2>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 
+		gic: interrupt-controller at e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial at e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial at e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial at e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial at e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial at e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		uart5: serial at e012a000 {
-			u-boot,dm-pre-reloc;
-			compatible = "actions,s900-serial";
-			reg = <0x0 0xe012a000 0x0 0x1000>;
-			clocks = <&cmu CLOCK_UART5>;
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
+		uart6: serial at e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sps: power-controller at e012e000 {
+			compatible = "actions,s900-sps";
+			reg = <0x0 0xe012e000 0x0 0x2000>;
+			#power-domain-cells = <1>;
+		};
+
 		cmu: clock-controller at e0160000 {
-			u-boot,dm-pre-reloc;
 			compatible = "actions,s900-cmu";
 			reg = <0x0 0xe0160000 0x0 0x1000>;
-			clocks = <&losc>, <&diff24M>;
-			clock-names = "losc", "diff24M";
+			clocks = <&hosc>, <&losc>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c at e0170000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0170000 0 0x1000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c at e0172000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0172000 0 0x1000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c at e0174000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0174000 0 0x1000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c at e0176000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0176000 0 0x1000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c at e0178000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0178000 0 0x1000>;
+			clocks = <&cmu CLK_I2C4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c at e017a000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe017a000 0 0x1000>;
+			clocks = <&cmu CLK_I2C5>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl at e01b0000 {
+			compatible = "actions,s900-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer: timer at e0228000 {
+			compatible = "actions,s900-timer";
+			reg = <0x0 0xe0228000 0x0 0x8000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+
+		dma: dma-controller at e0260000 {
+			compatible = "actions,s900-dma";
+			reg = <0x0 0xe0260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <12>;
+			dma-requests = <46>;
+			clocks = <&cmu CLK_DMAC>;
+		};
+
+		mmc0: mmc at e0330000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0330000 0x0 0x4000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc at e0334000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0334000 0x0 0x4000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc at e0338000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0338000 0x0 0x4000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc3: mmc at e033c000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe033c000 0x0 0x4000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD3>;
+			resets = <&cmu RESET_SD3>;
+			dmas = <&dma 46>;
+			dma-names = "mmc";
+			status = "disabled";
 		};
 	};
 };
-
include/dt-bindings/clock/actions,s900-cmu.h new file +129 -0
new file mode 100644
index 0000000..7c12515
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Device Tree binding constants for Actions Semi S900 Clock Management Unit
+//
+// Copyright (c) 2014 Actions Semi Inc.
+// Copyright (c) 2018 Linaro Ltd.
+
+#ifndef __DT_BINDINGS_CLOCK_S900_CMU_H
+#define __DT_BINDINGS_CLOCK_S900_CMU_H
+
+#define CLK_NONE			0
+
+/* fixed rate clocks */
+#define CLK_LOSC			1
+#define CLK_HOSC			2
+
+/* pll clocks */
+#define CLK_CORE_PLL			3
+#define CLK_DEV_PLL			4
+#define CLK_DDR_PLL			5
+#define CLK_NAND_PLL			6
+#define CLK_DISPLAY_PLL			7
+#define CLK_DSI_PLL			8
+#define CLK_ASSIST_PLL			9
+#define CLK_AUDIO_PLL			10
+
+/* system clock */
+#define CLK_CPU				15
+#define CLK_DEV				16
+#define CLK_NOC				17
+#define CLK_NOC_MUX			18
+#define CLK_NOC_DIV			19
+#define CLK_AHB				20
+#define CLK_APB				21
+#define CLK_DMAC			22
+
+/* peripheral device clock */
+#define CLK_GPIO			23
+
+#define CLK_BISP			24
+#define CLK_CSI0			25
+#define CLK_CSI1			26
+
+#define CLK_DE0				27
+#define CLK_DE1				28
+#define CLK_DE2				29
+#define CLK_DE3				30
+#define CLK_DSI				32
+
+#define CLK_GPU				33
+#define CLK_GPU_CORE			34
+#define CLK_GPU_MEM			35
+#define CLK_GPU_SYS			36
+
+#define CLK_HDE				37
+#define CLK_I2C0			38
+#define CLK_I2C1			39
+#define CLK_I2C2			40
+#define CLK_I2C3			41
+#define CLK_I2C4			42
+#define CLK_I2C5			43
+#define CLK_I2SRX			44
+#define CLK_I2STX			45
+#define CLK_IMX				46
+#define CLK_LCD				47
+#define CLK_NAND0			48
+#define CLK_NAND1			49
+#define CLK_PWM0			50
+#define CLK_PWM1			51
+#define CLK_PWM2			52
+#define CLK_PWM3			53
+#define CLK_PWM4			54
+#define CLK_PWM5			55
+#define CLK_SD0				56
+#define CLK_SD1				57
+#define CLK_SD2				58
+#define CLK_SD3				59
+#define CLK_SENSOR			60
+#define CLK_SPEED_SENSOR		61
+#define CLK_SPI0			62
+#define CLK_SPI1			63
+#define CLK_SPI2			64
+#define CLK_SPI3			65
+#define CLK_THERMAL_SENSOR		66
+#define CLK_UART0			67
+#define CLK_UART1			68
+#define CLK_UART2			69
+#define CLK_UART3			70
+#define CLK_UART4			71
+#define CLK_UART5			72
+#define CLK_UART6			73
+#define CLK_VCE				74
+#define CLK_VDE				75
+
+#define CLK_USB3_480MPLL0		76
+#define CLK_USB3_480MPHY0		77
+#define CLK_USB3_5GPHY			78
+#define CLK_USB3_CCE			79
+#define CLK_USB3_MAC			80
+
+#define CLK_TIMER			83
+
+#define CLK_HDMI_AUDIO			84
+
+#define CLK_24M				85
+
+#define CLK_EDP				86
+
+#define CLK_24M_EDP			87
+#define CLK_EDP_PLL			88
+#define CLK_EDP_LINK			89
+
+#define CLK_USB2H0_PLLEN		90
+#define CLK_USB2H0_PHY			91
+#define CLK_USB2H0_CCE			92
+#define CLK_USB2H1_PLLEN		93
+#define CLK_USB2H1_PHY			94
+#define CLK_USB2H1_CCE			95
+
+#define CLK_DDR0			96
+#define CLK_DDR1			97
+#define CLK_DMM				98
+
+#define CLK_ETH_MAC			99
+#define CLK_RMII_REF			100
+
+#define CLK_NR_CLKS			(CLK_RMII_REF + 1)
+
+#endif /* __DT_BINDINGS_CLOCK_S900_CMU_H */
include/dt-bindings/clock/s900_cmu.h deleted +0 -77
deleted file mode 100644
index 2685a6d..0000000
@@ -1,77 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2015 Actions Semi Co., Ltd.
- * Copyright (C) 2018 Manivannan Sadhasivam <[email protected]>
- *
- */
-
-#ifndef _DT_BINDINGS_CLOCK_S900_CMU_H_
-#define _DT_BINDINGS_CLOCK_S900_CMU_H_
-
-/* Module Clock ID */
-#define CLOCK_DDRCH1				0
-#define CLOCK_DMAC				1
-#define CLOCK_DDRCH0				2
-#define CLOCK_BROM				3
-#define CLOCK_NANDC0				4
-#define CLOCK_SD0				5
-#define CLOCK_SD1				6
-#define CLOCK_SD2				7
-#define CLOCK_DE				8
-#define CLOCK_LVDS				9
-#define CLOCK_EDP				10
-#define CLOCK_NANDC1				11
-#define CLOCK_DSI				12
-#define CLOCK_CSI0				13
-#define CLOCK_BISP				14
-#define CLOCK_CSI1				15
-#define CLOCK_SD3				16
-#define CLOCK_I2C4				17
-#define CLOCK_GPIO				18
-#define CLOCK_DMM				19
-#define CLOCK_I2STX				20
-#define CLOCK_I2SRX				21
-#define CLOCK_HDMIA				22
-#define CLOCK_SPDIF				23
-#define CLOCK_PCM0				24
-#define CLOCK_VDE				25
-#define CLOCK_VCE				26
-#define CLOCK_HDE				27
-#define CLOCK_SHARESRAM				28
-#define CLOCK_CMU_DDR1				29
-#define CLOCK_GPU3D				30
-#define CLOCK_CMUDDR0				31
-#define CLOCK_SPEED				32
-#define CLOCK_I2C5				33
-#define CLOCK_THERMAL				34
-#define CLOCK_HDMI				35
-#define CLOCK_PWM4				36
-#define CLOCK_PWM5				37
-#define CLOCK_UART0				38
-#define CLOCK_UART1				39
-#define CLOCK_UART2				40
-#define CLOCK_IRC				41
-#define CLOCK_SPI0				42
-#define CLOCK_SPI1				43
-#define CLOCK_SPI2				44
-#define CLOCK_SPI3				45
-#define CLOCK_I2C0				46
-#define CLOCK_I2C1				47
-#define CLOCK_PCM1				48
-#define CLOCK_IMX				49
-#define CLOCK_UART6				50
-#define CLOCK_UART3				51
-#define CLOCK_UART4				52
-#define CLOCK_UART5				53
-#define CLOCK_ETHERNET				54
-#define CLOCK_PWM0				55
-#define CLOCK_PWM1				56
-#define CLOCK_PWM2				57
-#define CLOCK_PWM3				58
-#define CLOCK_TIMER				59
-#define CLOCK_SE				60
-#define CLOCK_HDCP2TX				61
-#define CLOCK_I2C2				62
-#define CLOCK_I2C3				63
-
-#endif
include/dt-bindings/reset/actions,s900-reset.h new file +65 -0
new file mode 100644
index 0000000..42c19d0
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+//
+// Device Tree binding constants for Actions Semi S900 Reset Management Unit
+//
+// Copyright (c) 2018 Linaro Ltd.
+
+#ifndef __DT_BINDINGS_ACTIONS_S900_RESET_H
+#define __DT_BINDINGS_ACTIONS_S900_RESET_H
+
+#define RESET_CHIPID				0
+#define RESET_CPU_SCNT				1
+#define RESET_SRAMI				2
+#define RESET_DDR_CTL_PHY			3
+#define RESET_DMAC				4
+#define RESET_GPIO				5
+#define RESET_BISP_AXI				6
+#define RESET_CSI0				7
+#define RESET_CSI1				8
+#define RESET_DE				9
+#define RESET_DSI				10
+#define RESET_GPU3D_PA				11
+#define RESET_GPU3D_PB				12
+#define RESET_HDE				13
+#define RESET_I2C0				14
+#define RESET_I2C1				15
+#define RESET_I2C2				16
+#define RESET_I2C3				17
+#define RESET_I2C4				18
+#define RESET_I2C5				19
+#define RESET_IMX				20
+#define RESET_NANDC0				21
+#define RESET_NANDC1				22
+#define RESET_SD0				23
+#define RESET_SD1				24
+#define RESET_SD2				25
+#define RESET_SD3				26
+#define RESET_SPI0				27
+#define RESET_SPI1				28
+#define RESET_SPI2				29
+#define RESET_SPI3				30
+#define RESET_UART0				31
+#define RESET_UART1				32
+#define RESET_UART2				33
+#define RESET_UART3				34
+#define RESET_UART4				35
+#define RESET_UART5				36
+#define RESET_UART6				37
+#define RESET_HDMI				38
+#define RESET_LVDS				39
+#define RESET_EDP				40
+#define RESET_USB2HUB				41
+#define RESET_USB2HSIC				42
+#define RESET_USB3				43
+#define RESET_PCM1				44
+#define RESET_AUDIO				45
+#define RESET_PCM0				46
+#define RESET_SE				47
+#define RESET_GIC				48
+#define RESET_DDR_CTL_PHY_AXI			49
+#define RESET_CMU_DDR				50
+#define RESET_DMM				51
+#define RESET_HDCP2TX				52
+#define RESET_ETHERNET				53
+
+#endif /* __DT_BINDINGS_ACTIONS_S900_RESET_H */
Signature · 1 line
2.7.4
#18 lore raw

PATCH v3 8/21 actions: s900: add u-boot specific dts file

In reply to Amit Singh Tomar

Devices like uart and clk are needed to be enabled before relocation. This patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 arch/arm/dts/s900-u-boot.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 arch/arm/dts/s900-u-boot.dtsi
arch/arm/dts/s900-u-boot.dtsi new file +17 -0
new file mode 100644
index 0000000..a95f2cc
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ */
+
+/{
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart5 {
+	u-boot,dm-pre-reloc;
+};
+
+&cmu {
+	u-boot,dm-pre-reloc;
+};
Signature · 1 line
2.7.4
#19 lore raw

PATCH v3 8/21 actions: s900: add u-boot specific dts file

Quoted 5 lines · Amit Singh Tomar

Devices like uart and clk are needed to be enabled before relocation. This patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.

---

Patch subject should mention dtsi not dts and also the prefix should be
arm: dts. With that,

Thanks,
Mani

Quoted 13 lines

Changes since v2:
* Newly added patch, not there in v2/v1.

---
 arch/arm/dts/s900-u-boot.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 arch/arm/dts/s900-u-boot.dtsi
arch/arm/dts/s900-u-boot.dtsi new file +0 -0
new file mode 100644
index 0000000..a95f2cc

arch/arm/dts/s900-u-boot.dtsi line 7

Quoted 7 lines
arch/arm/dts/s900-u-boot.dtsi new file +7 -0
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ */
+
+/{
+	soc {
+		u-boot,dm-pre-reloc;

Ignore my comment about this change in previous patch.

Quoted 13 lines
arch/arm/dts/s900-u-boot.dtsi new file +10 -0
+	};
+};
+
+&uart5 {
+	u-boot,dm-pre-reloc;
+};
+
+&cmu {
+	u-boot,dm-pre-reloc;
+};
Signature · 1 line
2.7.4
#20 lore raw

PATCH v3 9/21 arm: dts: Use consistent name "CLK_ETHERNET" for the Ethernet clock binding

In reply to Amit Singh Tomar

Right now, Clock bindings for ethernet uses different names(even in Linux) CLK_ETH_MAC for S900 and CLK_ETHERNET for S700, It causes compilation problem when using them for common clock driver.

Let's use same name CLK_ETHERNET for both S700 and S900.

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 include/dt-bindings/clock/actions,s900-cmu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/dt-bindings/clock/actions,s900-cmu.h +1 -1
index 7c12515..2247f1c 100644
@@ -121,7 +121,7 @@
 #define CLK_DDR1			97
 #define CLK_DMM				98
 
-#define CLK_ETH_MAC			99
+#define CLK_ETHERNET			99
 #define CLK_RMII_REF			100
 
 #define CLK_NR_CLKS			(CLK_RMII_REF + 1)
Signature · 1 line
2.7.4
#21 lore raw

PATCH v3 9/21 arm: dts: Use consistent name "CLK_ETHERNET" for the Ethernet clock binding

Quoted 7 lines · Amit Singh Tomar

Right now, Clock bindings for ethernet uses different names(even in Linux) CLK_ETH_MAC for S900 and CLK_ETHERNET for S700, It causes compilation problem when using them for common clock driver.

Let's use same name CLK_ETHERNET for both S700 and S900.

Thanks,
Mani

Quoted 23 lines

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 include/dt-bindings/clock/actions,s900-cmu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/dt-bindings/clock/actions,s900-cmu.h +1 -1
index 7c12515..2247f1c 100644
@@ -121,7 +121,7 @@
 #define CLK_DDR1			97
 #define CLK_DMM				98
 
-#define CLK_ETH_MAC			99
+#define CLK_ETHERNET			99
 #define CLK_RMII_REF			100
 
 #define CLK_NR_CLKS			(CLK_RMII_REF + 1)
Signature · 1 line
2.7.4
#22 lore raw

PATCH v3 9/21 arm: dts: Use consistent name "CLK_ETHERNET" for the Ethernet clock binding

On Sun, 23 Feb 2020 23:08:25 +0530
Manivannan Sadhasivam <[email protected]> wrote:

Hi Amit,

Quoted 6 lines · Amit Singh Tomar
Quoted 5 lines

Right now, Clock bindings for ethernet uses different names(even in Linux) CLK_ETH_MAC for S900 and CLK_ETHERNET for S700, It causes compilation problem when using them for common clock driver.

Let's use same name CLK_ETHERNET for both S700 and S900.

So are you changing the include file that you just imported from Linux? I don't think that's a good idea, as you start to divert from the kernel in a subtle way. And especially the header files should stay unchanged. So either you send this patch to the kernel first, or, probably better, you drop this change here, and unify the name at the point where it's used (#ifndef CLK_ETHERNET ....)

Cheers,
Andre.

Quoted 31 lines
Quoted 2 lines

Thanks,
Mani

Quoted 23 lines

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 include/dt-bindings/clock/actions,s900-cmu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/dt-bindings/clock/actions,s900-cmu.h +1 -1
index 7c12515..2247f1c 100644
@@ -121,7 +121,7 @@
 #define CLK_DDR1			97
 #define CLK_DMM				98
 
-#define CLK_ETH_MAC			99
+#define CLK_ETHERNET			99
 #define CLK_RMII_REF			100
 
 #define CLK_NR_CLKS			(CLK_RMII_REF + 1)
Signature · 1 line
2.7.4
#23 lore raw

PATCH v3 9/21 arm: dts: Use consistent name "CLK_ETHERNET" for the Ethernet clock binding

Quoted 6 lines · Andre Przywara

On Sun, 23 Feb 2020 23:08:25 +0530
Manivannan Sadhasivam <[email protected]> wrote:

Hi Amit,

Quoted 1 line · Amit Singh Tomar
Quoted 9 lines
Quoted 5 lines
Quoted 5 lines

Right now, Clock bindings for ethernet uses different names(even in Linux) CLK_ETH_MAC for S900 and CLK_ETHERNET for S700, It causes compilation problem when using them for common clock driver.

Let's use same name CLK_ETHERNET for both S700 and S900.

So are you changing the include file that you just imported from Linux? I don't think that's a good idea, as you start to divert from the kernel in a subtle way. And especially the header files should stay unchanged. So either you send this patch to the kernel first, or, probably better, you drop this change here, and unify the name at the point where it's used (#ifndef CLK_ETHERNET ....)

Good point. I'm happy to accept this change in kernel but not sure what Andreas will say.

Thanks,
Mani

Quoted 35 lines

Cheers,
Andre.

Quoted 31 lines
Quoted 2 lines

Thanks,
Mani

Quoted 23 lines

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 include/dt-bindings/clock/actions,s900-cmu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/dt-bindings/clock/actions,s900-cmu.h +1 -1
index 7c12515..2247f1c 100644
@@ -121,7 +121,7 @@
 #define CLK_DDR1			97
 #define CLK_DMM				98
 
-#define CLK_ETH_MAC			99
+#define CLK_ETHERNET			99
 #define CLK_RMII_REF			100
 
 #define CLK_NR_CLKS			(CLK_RMII_REF + 1)
Signature · 1 line
2.7.4
author
#24 lore raw

PATCH v3 9/21 arm: dts: Use consistent name "CLK_ETHERNET" for the Ethernet clock binding

In reply to Andre Przywara

Hi,

Quoted 1 line

So either you send this patch to the kernel first, or, probably better, you drop this change here, and unify the name at the point where it's used (#ifndef CLK_ETHERNET ....)

But this is something mentioned in cover letter:

"Patch(9/21) uses same name for ethernet clock binding and if it's ok, would like to send it to LKML
as well."

anyways as suggested by Mani to drop Ethernet related patches for now, this patch is not necessary in that case.
Meanwhile, would send it to LKML first for a review.

Thanks
-Amit

#25 lore raw

PATCH v3 10/21 serial: actions: add uart support for s700

In reply to Amit Singh Tomar

UART controller present on S700 is compatible with existing S900 controller, this patch simply adds a proper compatible string so that owl uart driver can be reused for S700.

---
Changes since v2:
* No changes.
Changes since v1:
* No changes.

---
 drivers/serial/serial_owl.c | 1 +
 1 file changed, 1 insertion(+)
drivers/serial/serial_owl.c +1 -0
index 7ead73e..76995bf 100644
@@ -121,6 +121,7 @@ static const struct dm_serial_ops owl_serial_ops = {
 
 static const struct udevice_id owl_serial_ids[] = {
 	{ .compatible =	"actions,s900-serial" },
+	{ .compatible =	"actions,owl-uart" },
 	{ }
 };
 
Signature · 1 line
2.7.4
#26 lore raw

PATCH v3 10/21 serial: actions: add uart support for s700

Quoted 20 lines · Amit Singh Tomar

UART controller present on S700 is compatible with existing S900 controller, this patch simply adds a proper compatible string so that owl uart driver can be reused for S700.

---
Changes since v2:
* No changes.
Changes since v1:
* No changes.

---
 drivers/serial/serial_owl.c | 1 +
 1 file changed, 1 insertion(+)
drivers/serial/serial_owl.c +0 -0
index 7ead73e..76995bf 100644

drivers/serial/serial_owl.c static const struct dm_serial_ops owl_serial_ops = { · line 124

Quoted 4 lines
drivers/serial/serial_owl.c +1 -0
@@ -121,6 +121,7 @@ static const struct dm_serial_ops owl_serial_ops = {
 
 static const struct udevice_id owl_serial_ids[] = {
 	{ .compatible =	"actions,s900-serial" },
+	{ .compatible =	"actions,owl-uart" },

Either use s900 and s700 or owl.

Thanks,
Mani

Quoted 6 lines
drivers/serial/serial_owl.c +0 -0
 	{ }
 };
 
Signature · 1 line
2.7.4
#27 lore raw

PATCH v3 11/21 arm: add Cubieboard7 board support

In reply to Amit Singh Tomar

The Cubieboard is a single board computer containing a Actions S700 SoC(with 4 ARMv8 Cortex-A53 cores).

This patch adds respective defconfig alongwith device tree(sync with Linux v5.5-rc6).

---
Changes since v2:
* Synced with Linux tag v5.5-rc6.
Changes since v1:
* No changes.

---
 arch/arm/dts/s700-cubieboard7.dts | 92 +++++++++++++++++++++++++++++++++++++++
 configs/cubieboard7_defconfig     | 16 +++++++
 2 files changed, 108 insertions(+)
 create mode 100644 arch/arm/dts/s700-cubieboard7.dts
 create mode 100644 configs/cubieboard7_defconfig
arch/arm/dts/s700-cubieboard7.dts new file +92 -0
new file mode 100644
index 0000000..63e375c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "s700.dtsi"
+
+/ {
+	compatible = "cubietech,cubieboard7", "actions,s700";
+	model = "CubieBoard7";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	memory at 1,e0000000 {
+		device_type = "memory";
+		reg = <0x1 0xe0000000 0x0 0x0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_default>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_default>;
+};
+
+&i2c2 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_default>;
+};
+
+&pinctrl {
+	i2c0_default: i2c0_default {
+		pinmux {
+			groups = "i2c0_mfp";
+			function = "i2c0";
+		};
+		pinconf {
+			pins = "i2c0_sclk", "i2c0_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c1_default: i2c1_default {
+		pinmux {
+			groups = "i2c1_dummy";
+			function = "i2c1";
+		};
+		pinconf {
+			pins = "i2c1_sclk", "i2c1_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c2_default: i2c2_default {
+		pinmux {
+			groups = "i2c2_dummy";
+			function = "i2c2";
+		};
+		pinconf {
+			pins = "i2c2_sclk", "i2c2_sdata";
+			bias-pull-up;
+		};
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+};
configs/cubieboard7_defconfig new file +16 -0
new file mode 100644
index 0000000..0459997
@@ -0,0 +1,16 @@
+CONFIG_ARM=y
+CONFIG_ARCH_OWL=y
+CONFIG_MACH_S700=y
+CONFIG_IDENT_STRING="\ncubieboard7"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyOWL3,115200n8"
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SYS_PROMPT="U-Boot => "
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_TIMER=y
+CONFIG_DEFAULT_DEVICE_TREE="s700-cubieboard7"
Signature · 1 line
2.7.4
#28 lore raw

PATCH v3 11/21 arm: add Cubieboard7 board support

Quoted 7 lines · Amit Singh Tomar

The Cubieboard is a single board computer containing a Actions S700 SoC(with 4 ARMv8 Cortex-A53 cores).

This patch adds respective defconfig alongwith device tree(sync with Linux v5.5-rc6).

Thanks,
Mani

Quoted 135 lines

---
Changes since v2:
* Synced with Linux tag v5.5-rc6.
Changes since v1:
* No changes.

---
 arch/arm/dts/s700-cubieboard7.dts | 92 +++++++++++++++++++++++++++++++++++++++
 configs/cubieboard7_defconfig     | 16 +++++++
 2 files changed, 108 insertions(+)
 create mode 100644 arch/arm/dts/s700-cubieboard7.dts
 create mode 100644 configs/cubieboard7_defconfig
arch/arm/dts/s700-cubieboard7.dts new file +92 -0
new file mode 100644
index 0000000..63e375c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas F?rber
+ */
+
+/dts-v1/;
+
+#include "s700.dtsi"
+
+/ {
+	compatible = "cubietech,cubieboard7", "actions,s700";
+	model = "CubieBoard7";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	memory at 1,e0000000 {
+		device_type = "memory";
+		reg = <0x1 0xe0000000 0x0 0x0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_default>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_default>;
+};
+
+&i2c2 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_default>;
+};
+
+&pinctrl {
+	i2c0_default: i2c0_default {
+		pinmux {
+			groups = "i2c0_mfp";
+			function = "i2c0";
+		};
+		pinconf {
+			pins = "i2c0_sclk", "i2c0_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c1_default: i2c1_default {
+		pinmux {
+			groups = "i2c1_dummy";
+			function = "i2c1";
+		};
+		pinconf {
+			pins = "i2c1_sclk", "i2c1_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c2_default: i2c2_default {
+		pinmux {
+			groups = "i2c2_dummy";
+			function = "i2c2";
+		};
+		pinconf {
+			pins = "i2c2_sclk", "i2c2_sdata";
+			bias-pull-up;
+		};
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+};
configs/cubieboard7_defconfig new file +16 -0
new file mode 100644
index 0000000..0459997
@@ -0,0 +1,16 @@
+CONFIG_ARM=y
+CONFIG_ARCH_OWL=y
+CONFIG_MACH_S700=y
+CONFIG_IDENT_STRING="\ncubieboard7"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyOWL3,115200n8"
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SYS_PROMPT="U-Boot => "
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_TIMER=y
+CONFIG_DEFAULT_DEVICE_TREE="s700-cubieboard7"
Signature · 1 line
2.7.4
#29 lore raw

PATCH v3 12/21 actions: add Cubieboard7 README

In reply to Amit Singh Tomar

---
Changes since v2:
* No Change.
Changes since v1:
* No Change.

---
 arch/arm/mach-owl/README.cubieboard7 | 88 ++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 arch/arm/mach-owl/README.cubieboard7
arch/arm/mach-owl/README.cubieboard7 new file +88 -0
new file mode 100644
index 0000000..3b2e90d
@@ -0,0 +1,88 @@
+Default Cubieboard7 comes with pre-installed Android where U-Boot is configured with a bootdelay of 0, entering a prompt by pressing keys does not seem to work.
+
+Though, one can enter ADFU mode and flash debian image(from host machine) where getting into u-boot prompt is easy.
+
+Enter ADFU Mode:
+
+Before write the firmware, let the development board entering the ADFU mode: insert
+one end of the USB cable to the PC, press and hold the ADFU button, and then connect
+the other end of the USB cable to the Mini USB port of the development board, release
+the ADFU button, after connecting it will enter the ADFU mode.
+
+Check whether to enter ADFU Mode:
+
+The user needs to run the following command on the PC side to check if the ADFU
+device is detected. ID realted to "Actions Semiconductor Co., Ltd"  means that
+the PC side has been correctly detected ADFU device, the development board
+also enter into the ADFU mode.
+
+#lsusb
+Bus 001 Device 005: ID 04f2:b2eb Chicony Electronics Co., Ltd
+Bus 001 Device 004: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad]
+Bus 001 Device 003: ID 046d:c534 Logitech, Inc. Unifying Receiver
+Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
+Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
+Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
+Bus 003 Device 013: ID 10d6:10d6 Actions Semiconductor Co., Ltd
+Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
+
+Flashing debian image:
+
+#sudo ./ActionsFWU.py --fw=debian-stretch-desktop-cb7-emmc-v2.0.fw
+ActionsFWU.py	: 1.0.150828.0830
+libScript.so    : 2.3.150825.0951
+libFileSystem.so: 2.3.150825.0952
+libProduction.so: 2.3.150915.1527
+=====burn all partition====
+FW_VER: 3.10.37.180608
+3% DOWNLOAD ADFUDEC ...
+5% DOWNLOAD BOOT PARA ...
+7% SWITCH ADFUDEC ...
+12% DOWNLOAD BL31 ...
+13% DOWNLOAD BL32 ...
+15% DOWNLOAD VMLINUX ...
+20% DOWNLOAD INITRD ...
+24% DOWNLOAD FDT ...
+27% DOWNLOAD ADFUS ...
+30% SWITCH ADFUS ...
+32% DOWNLOAD MBR ...
+35% DOWNLOAD PARTITIONS ...
+WRITE_MBRC_PARTITION
+35% write p0 size = 2048 : ok
+WRITE_BOOT_PARTITION
+35% write p1 size = 2048 : ok
+WRITE_MISC_PARTITION
+36% write p2 size = 98304 : ok
+WRITE_SYSTEM_PARTITION
+94% write p3 size = 4608000 : ok
+FORMAT_SWAP_PARTITION
+94% write p4 size = 20480 : ok
+95% TRANSFER OVER ...
+Firmware upgrade successfully!
+
+Debian image can be downloaded from here[1].
+
+Once debian image is flashed, one can get into u-boot prompt by pressing any key and from
+there run ums command(make sure, usb cable is connected between host and target):
+
+owl> ums 0 mmc 1
+
+Above command would mount debian image partition on host machine.
+
+Getting Cubieboard7 u-boot proper image:
+
+From u-boot root directory run following:
+
+#make clean
+#export CROSS_COMPILE=aarch64-linux-gnu-
+#make ARCH=arm cubieboard7_defconfig
+#make -j16
+#mkimage -A arm -T firmware -C none -O u-boot -a 0x11000000 -e 0 -d u-boot-dtb.bin u-boot-dtb.img  >/dev/null
+
+u-boot-dtb.img can now be flashed to debian image partition mounted on host machine.
+
+#sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1024 seek=3072
+
+
+[1] https://mega.nz/#F!ZtwxCCJC!AIYHcTqz-ucjuzKnE9qD7A!xpJ0CSjQ
+
Signature · 1 line
2.7.4
#30 lore raw

PATCH v3 12/21 actions: add Cubieboard7 README

Quoted 10 lines · Amit Singh Tomar

---
Changes since v2:
* No Change.
Changes since v1:
* No Change.

---
 arch/arm/mach-owl/README.cubieboard7 | 88 ++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 arch/arm/mach-owl/README.cubieboard7

This should be a rst file and reside in doc/board/ (and update the index file). Thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200211/f729585f/attachment.sig>
#31 lore raw

PATCH v3 13/21 net: phy: realtek: Add support for RTL8201F PHY module.

In reply to Amit Singh Tomar

This patch adds support for Realtek PHY RTL8201F 10/100Mbs(with variants: RTL8201FN and RTL8201FL) PHYceiver. It can be found on Actions Semi Cubieboard7 board.

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 drivers/net/phy/realtek.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
drivers/net/phy/realtek.c +20 -0
index 8f1d759..b9c373b 100644
@@ -157,6 +157,14 @@ static int rtl8211x_config(struct phy_device *phydev)
 	return 0;
 }
 
+/* RealTek RTL8201F */
+static int rtl8201f_config(struct phy_device *phydev)
+{
+	genphy_config_aneg(phydev);
+
+	return 0;
+}
+
 static int rtl8211f_config(struct phy_device *phydev)
 {
 	u16 reg;
@@ -386,12 +394,24 @@ static struct phy_driver RTL8211F_driver = {
 	.writeext = &rtl8211f_phy_extwrite,
 };
 
+/* Support for RTL8201F PHY */
+static struct phy_driver RTL8201F_driver = {
+	.name = "RealTek RTL8201F 10/100Mbps Ethernet",
+	.uid = 0x1cc816,
+	.mask = 0xffffff,
+	.features = PHY_BASIC_FEATURES,
+	.config = &rtl8201f_config,
+	.startup = &rtl8211e_startup,
+	.shutdown = &genphy_shutdown,
+};
+
 int phy_realtek_init(void)
 {
 	phy_register(&RTL8211B_driver);
 	phy_register(&RTL8211E_driver);
 	phy_register(&RTL8211F_driver);
 	phy_register(&RTL8211DN_driver);
+	phy_register(&RTL8201F_driver);
 
 	return 0;
 }
Signature · 1 line
2.7.4
#32 lore raw

PATCH v3 14/21 net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust rx/tx timings

In reply to Amit Singh Tomar

RTL8201F PHY module found on Actions Semi Cubieboard7 seems to have specific Rx/Tx interface timings requirement for proper PHY operations. These timing values are not documented anywhere and picked from vendor code. This patch lets proper packets to be transmitted over the network.

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 drivers/net/phy/Kconfig   |  9 +++++++++
 drivers/net/phy/realtek.c | 35 +++++++++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+)
drivers/net/phy/Kconfig +9 -0
index dceea15..bdf6a2d 100644
@@ -235,6 +235,15 @@ config RTL8211F_PHY_FORCE_EEE_RXC_ON
 	  Default n, which means that the PHY state is not changed. To work
 	  around the issues, change this setting to y.
 
+config RTL8201F_PHY_S700_RMII_TIMINGS
+	bool "Ethernet PHY RTL8201F: adjust RMII Tx Interface timings"
+	depends on PHY_REALTEK
+	help
+	  This provides an option to configure specific timing requirements (needed
+	  for proper PHY operations) for the PHY module present on ACTION SEMI S700
+	  based cubieboard7. Exact timing requiremnets seems to be SoC specific
+	  (and it's undocumented) that comes from vendor code itself.
+
 config PHY_SMSC
 	bool  "Microchip(SMSC) Ethernet PHYs support"
 
drivers/net/phy/realtek.c +35 -0
index b9c373b..a549a10 100644
@@ -13,6 +13,7 @@
 #define PHY_RTL8211x_FORCE_MASTER BIT(1)
 #define PHY_RTL8211E_PINE64_GIGABIT_FIX BIT(2)
 #define PHY_RTL8211F_FORCE_EEE_RXC_ON BIT(3)
+#define PHY_RTL8201F_S700_RMII_TIMINGS BIT(4)
 
 #define PHY_AUTONEGOTIATE_TIMEOUT 5000
 
@@ -58,6 +59,15 @@
 #define MIIM_RTL8211F_TX_DELAY		0x100
 #define MIIM_RTL8211F_LCR		0x10
 
+#define RTL8201F_RMSR			0x10
+
+#define RMSR_RX_TIMING_SHIFT		BIT(2)
+#define RMSR_RX_TIMING_MASK		GENMASK(7, 4)
+#define RMSR_RX_TIMING_VAL		0x4
+#define RMSR_TX_TIMING_SHIFT		BIT(3)
+#define RMSR_TX_TIMING_MASK		GENMASK(11, 8)
+#define RMSR_TX_TIMING_VAL		0x5
+
 static int rtl8211f_phy_extread(struct phy_device *phydev, int addr,
 				int devaddr, int regnum)
 {
@@ -112,6 +122,15 @@ static int rtl8211f_probe(struct phy_device *phydev)
 	return 0;
 }
 
+static int rtl8210f_probe(struct phy_device *phydev)
+{
+#ifdef CONFIG_RTL8201F_PHY_S700_RMII_TIMINGS
+	phydev->flags |= PHY_RTL8201F_S700_RMII_TIMINGS;
+#endif
+
+	return 0;
+}
+
 /* RealTek RTL8211x */
 static int rtl8211x_config(struct phy_device *phydev)
 {
@@ -160,6 +179,21 @@ static int rtl8211x_config(struct phy_device *phydev)
 /* RealTek RTL8201F */
 static int rtl8201f_config(struct phy_device *phydev)
 {
+	unsigned int reg;
+
+	if (phydev->flags & PHY_RTL8201F_S700_RMII_TIMINGS) {
+		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT,
+			  7);
+		reg = phy_read(phydev, MDIO_DEVAD_NONE, RTL8201F_RMSR);
+		reg &= ~(RMSR_RX_TIMING_MASK | RMSR_TX_TIMING_MASK);
+		/* Set the needed Rx/Tx Timings for proper PHY operation */
+		reg |= (RMSR_RX_TIMING_VAL << RMSR_RX_TIMING_SHIFT)
+		       | (RMSR_TX_TIMING_VAL << RMSR_TX_TIMING_SHIFT);
+		phy_write(phydev, MDIO_DEVAD_NONE, RTL8201F_RMSR, reg);
+		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT,
+			  0);
+	}
+
 	genphy_config_aneg(phydev);
 
 	return 0;
@@ -400,6 +434,7 @@ static struct phy_driver RTL8201F_driver = {
 	.uid = 0x1cc816,
 	.mask = 0xffffff,
 	.features = PHY_BASIC_FEATURES,
+	.probe = &rtl8210f_probe,
 	.config = &rtl8201f_config,
 	.startup = &rtl8211e_startup,
 	.shutdown = &genphy_shutdown,
Signature · 1 line
2.7.4
#33 lore raw

PATCH v3 15/21 reset: add driver for generic reset controllers

In reply to Amit Singh Tomar

The simplest and most generic form of a reset controller just exposes multiple MMIO registers, where each bit toggles a separate reset line. Add a generic driver to describe this kind of reset controller.

This is used on the Action Semi S700, for instance, but also by other SoCs.

[Andre: make more generic, let it cover multiple registers, slight rework]

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 drivers/reset/Kconfig         |   6 +++
 drivers/reset/Makefile        |   1 +
 drivers/reset/reset-generic.c | 111 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 118 insertions(+)
 create mode 100644 drivers/reset/reset-generic.c
drivers/reset/Kconfig +6 -0
index 75ccd65..1cdc159 100644
@@ -12,6 +12,12 @@ config DM_RESET
 	  although driving such reset isgnals using GPIOs may be more
 	  appropriate in this case.
 
+config GENERIC_RESET
+        bool "Generic Reset controller driver"
+        depends on DM_RESET
+        help
+          Support Generic reset controller.
+
 config SANDBOX_RESET
 	bool "Enable the sandbox reset test driver"
 	depends on DM_MAILBOX && SANDBOX
drivers/reset/Makefile +1 -0
index 0a044d5..5e027a1 100644
@@ -4,6 +4,7 @@
 #
 
 obj-$(CONFIG_DM_RESET) += reset-uclass.o
+obj-$(CONFIG_GENERIC_RESET) += reset-generic.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset-test.o
 obj-$(CONFIG_STI_RESET) += sti-reset.o
drivers/reset/reset-generic.c new file +111 -0

111 lines not on this page · raw message

Signature · 1 line
2.7.4
#34 lore raw

PATCH v3 15/21 reset: add driver for generic reset controllers

Quoted 7 lines · Amit Singh Tomar

The simplest and most generic form of a reset controller just exposes multiple MMIO registers, where each bit toggles a separate reset line. Add a generic driver to describe this kind of reset controller.

This is used on the Action Semi S700, for instance, but also by other SoCs.

Why not name it as reset-simple as linux kernel?

Quoted 117 lines
[Andre: make more generic, let it cover multiple registers, slight rework]

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 drivers/reset/Kconfig         |   6 +++
 drivers/reset/Makefile        |   1 +
 drivers/reset/reset-generic.c | 111 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 118 insertions(+)
 create mode 100644 drivers/reset/reset-generic.c
drivers/reset/Kconfig +6 -0
index 75ccd65..1cdc159 100644
@@ -12,6 +12,12 @@ config DM_RESET
 	  although driving such reset isgnals using GPIOs may be more
 	  appropriate in this case.
 
+config GENERIC_RESET
+        bool "Generic Reset controller driver"
+        depends on DM_RESET
+        help
+          Support Generic reset controller.
+
 config SANDBOX_RESET
 	bool "Enable the sandbox reset test driver"
 	depends on DM_MAILBOX && SANDBOX
drivers/reset/Makefile +1 -0
index 0a044d5..5e027a1 100644
@@ -4,6 +4,7 @@
 #
 
 obj-$(CONFIG_DM_RESET) += reset-uclass.o
+obj-$(CONFIG_GENERIC_RESET) += reset-generic.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset-test.o
 obj-$(CONFIG_STI_RESET) += sti-reset.o
drivers/reset/reset-generic.c new file +69 -0
new file mode 100644
index 0000000..9c45087
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2017 Amit Singh Tomar <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <reset-uclass.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct generic_reset_priv {
+	void __iomem *membase;
+	int max_reset;
+};
+
+#define BITS_PER_BYTE 8
+static int generic_reset_toggle(struct reset_ctl *rst, bool assert)
+{
+	struct generic_reset_priv *priv = dev_get_priv(rst->dev);
+	int reg_width = sizeof(u32);
+	int bank, offset;
+	u32 reg;
+
+	if (rst->id >= priv->max_reset)
+		return -EINVAL;
+
+	bank = rst->id / (reg_width * BITS_PER_BYTE);
+	offset = rst->id % (reg_width * BITS_PER_BYTE);
+
+	reg = readl(priv->membase + (bank * reg_width));
+	if (assert)
+		writel(reg & ~BIT(offset), priv->membase + (bank * reg_width));
+	else
+		writel(reg | BIT(offset), priv->membase + (bank * reg_width));
+
+	return 0;
+}
+
+static int generic_reset_assert(struct reset_ctl *rst)
+{
+	return generic_reset_toggle(rst, true);
+}
+
+static int generic_reset_deassert(struct reset_ctl *rst)
+{
+	return generic_reset_toggle(rst, false);
+}
+
+static int generic_reset_free(struct reset_ctl *rst)
+{
+	return 0;
+}
+
+static int generic_reset_request(struct reset_ctl *rst)
+{
+	struct generic_reset_priv *priv = dev_get_priv(rst->dev);
+
+	if (rst->id >= priv->max_reset)
+		return -EINVAL;
+
+	return generic_reset_assert(rst);
+}
+

drivers/reset/reset-generic.c line 79

Quoted 10 lines
drivers/reset/reset-generic.c new file +10 -0
+struct reset_ops generic_reset_reset_ops = {
+	.free = generic_reset_free,
+	.request = generic_reset_request,
+	.rst_assert = generic_reset_assert,
+	.rst_deassert = generic_reset_deassert,
+};
+
+static const struct udevice_id generic_reset_ids[] = {
+	{ .compatible = "generic-reset" },
+	{ .compatible = "actions,s700-reset" },

No need of S700 specific compatible here. Linux kernel dts also doesn't require it.

Thanks,
Mani

Quoted 35 lines
drivers/reset/reset-generic.c new file +32 -0
+	{ }
+};
+
+static int generic_reset_probe(struct udevice *dev)
+{
+	struct generic_reset_priv *priv = dev_get_priv(dev);
+	fdt_addr_t addr;
+	fdt_size_t size;
+
+	addr = devfdt_get_addr_size_index(dev, 0, &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->max_reset = dev_read_u32_default(dev, "num-resets", -1);
+	if (priv->max_reset == -1)
+		priv->max_reset = size * BITS_PER_BYTE;
+
+	priv->membase = devm_ioremap(dev, addr, size);
+	if (!priv->membase)
+		return -EFAULT;
+
+	return 0;
+}
+
+U_BOOT_DRIVER(generic_reset) = {
+	.name = "generic_reset",
+	.id = UCLASS_RESET,
+	.of_match = generic_reset_ids,
+	.ops = &generic_reset_reset_ops,
+	.probe = generic_reset_probe,
+	.priv_auto_alloc_size = sizeof(struct generic_reset_priv),
+};
Signature · 1 line
2.7.4
#35 lore raw

PATCH v3 15/21 reset: add driver for generic reset controllers

In reply to Amit Singh Tomar

On Sat, 25 Jan 2020 17:52:57 +0530
Amit Singh Tomar <[email protected]> wrote:

Hi,

Quoted 6 lines

The simplest and most generic form of a reset controller just exposes multiple MMIO registers, where each bit toggles a separate reset line. Add a generic driver to describe this kind of reset controller.

This is used on the Action Semi S700, for instance, but also by other SoCs.

As tempting as this may be, but the S900 uses the more common style of integrating the reset controller in the CMU device:

	mmc0: mmc at e0330000 {
	...
		clocks = <&cmu CLK_SD0>;
		resets = <&cmu RESET_SD0>;
	...

So you should probably follow suit here for the S700 as well, especially as the Linux S700 CMU driver already defines resets, they just don't seem to be used yet.

So please drop this patch and the next one, and integrate the reset functionality in clk_owl.c, similar to what we do for sunxi.

Cheers,
Andre.

Quoted 160 lines
[Andre: make more generic, let it cover multiple registers, slight rework]

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 drivers/reset/Kconfig         |   6 +++
 drivers/reset/Makefile        |   1 +
 drivers/reset/reset-generic.c | 111 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 118 insertions(+)
 create mode 100644 drivers/reset/reset-generic.c
drivers/reset/Kconfig +6 -0
index 75ccd65..1cdc159 100644
@@ -12,6 +12,12 @@ config DM_RESET
 	  although driving such reset isgnals using GPIOs may be more
 	  appropriate in this case.
 
+config GENERIC_RESET
+        bool "Generic Reset controller driver"
+        depends on DM_RESET
+        help
+          Support Generic reset controller.
+
 config SANDBOX_RESET
 	bool "Enable the sandbox reset test driver"
 	depends on DM_MAILBOX && SANDBOX
drivers/reset/Makefile +1 -0
index 0a044d5..5e027a1 100644
@@ -4,6 +4,7 @@
 #
 
 obj-$(CONFIG_DM_RESET) += reset-uclass.o
+obj-$(CONFIG_GENERIC_RESET) += reset-generic.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset-test.o
 obj-$(CONFIG_STI_RESET) += sti-reset.o
drivers/reset/reset-generic.c new file +111 -0
new file mode 100644
index 0000000..9c45087
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2017 Amit Singh Tomar <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <reset-uclass.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct generic_reset_priv {
+	void __iomem *membase;
+	int max_reset;
+};
+
+#define BITS_PER_BYTE 8
+static int generic_reset_toggle(struct reset_ctl *rst, bool assert)
+{
+	struct generic_reset_priv *priv = dev_get_priv(rst->dev);
+	int reg_width = sizeof(u32);
+	int bank, offset;
+	u32 reg;
+
+	if (rst->id >= priv->max_reset)
+		return -EINVAL;
+
+	bank = rst->id / (reg_width * BITS_PER_BYTE);
+	offset = rst->id % (reg_width * BITS_PER_BYTE);
+
+	reg = readl(priv->membase + (bank * reg_width));
+	if (assert)
+		writel(reg & ~BIT(offset), priv->membase + (bank * reg_width));
+	else
+		writel(reg | BIT(offset), priv->membase + (bank * reg_width));
+
+	return 0;
+}
+
+static int generic_reset_assert(struct reset_ctl *rst)
+{
+	return generic_reset_toggle(rst, true);
+}
+
+static int generic_reset_deassert(struct reset_ctl *rst)
+{
+	return generic_reset_toggle(rst, false);
+}
+
+static int generic_reset_free(struct reset_ctl *rst)
+{
+	return 0;
+}
+
+static int generic_reset_request(struct reset_ctl *rst)
+{
+	struct generic_reset_priv *priv = dev_get_priv(rst->dev);
+
+	if (rst->id >= priv->max_reset)
+		return -EINVAL;
+
+	return generic_reset_assert(rst);
+}
+
+struct reset_ops generic_reset_reset_ops = {
+	.free = generic_reset_free,
+	.request = generic_reset_request,
+	.rst_assert = generic_reset_assert,
+	.rst_deassert = generic_reset_deassert,
+};
+
+static const struct udevice_id generic_reset_ids[] = {
+	{ .compatible = "generic-reset" },
+	{ .compatible = "actions,s700-reset" },
+	{ }
+};
+
+static int generic_reset_probe(struct udevice *dev)
+{
+	struct generic_reset_priv *priv = dev_get_priv(dev);
+	fdt_addr_t addr;
+	fdt_size_t size;
+
+	addr = devfdt_get_addr_size_index(dev, 0, &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->max_reset = dev_read_u32_default(dev, "num-resets", -1);
+	if (priv->max_reset == -1)
+		priv->max_reset = size * BITS_PER_BYTE;
+
+	priv->membase = devm_ioremap(dev, addr, size);
+	if (!priv->membase)
+		return -EFAULT;
+
+	return 0;
+}
+
+U_BOOT_DRIVER(generic_reset) = {
+	.name = "generic_reset",
+	.id = UCLASS_RESET,
+	.of_match = generic_reset_ids,
+	.ops = &generic_reset_reset_ops,
+	.probe = generic_reset_probe,
+	.priv_auto_alloc_size = sizeof(struct generic_reset_priv),
+};
#36 lore raw

PATCH v3 15/21 reset: add driver for generic reset controllers

In reply to Amit Singh Tomar

On Sat, 25 Jan 2020 17:52:57 +0530
Amit Singh Tomar <[email protected]> wrote:

Hi,

Quoted 6 lines

The simplest and most generic form of a reset controller just exposes multiple MMIO registers, where each bit toggles a separate reset line. Add a generic driver to describe this kind of reset controller.

This is used on the Action Semi S700, for instance, but also by other SoCs.

As tempting as this may be, but the S900 uses the more common style of integrating the reset controller in the CMU device:

	mmc0: mmc at e0330000 {
	...
		clocks = <&cmu CLK_SD0>;
		resets = <&cmu RESET_SD0>;
	...

So you should probably follow suit here for the S700 as well, especially as the Linux S700 CMU driver already defines resets, they just don't seem to be used yet.

So please drop this patch and the next one, and integrate the reset functionality in clk_owl.c, similar to what we do for sunxi.

Cheers,
Andre.

P.S. I agree with Mani that the Ethernet patches should be a separate series.

Quoted 160 lines
[Andre: make more generic, let it cover multiple registers, slight rework]

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 drivers/reset/Kconfig         |   6 +++
 drivers/reset/Makefile        |   1 +
 drivers/reset/reset-generic.c | 111 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 118 insertions(+)
 create mode 100644 drivers/reset/reset-generic.c
drivers/reset/Kconfig +6 -0
index 75ccd65..1cdc159 100644
@@ -12,6 +12,12 @@ config DM_RESET
 	  although driving such reset isgnals using GPIOs may be more
 	  appropriate in this case.
 
+config GENERIC_RESET
+        bool "Generic Reset controller driver"
+        depends on DM_RESET
+        help
+          Support Generic reset controller.
+
 config SANDBOX_RESET
 	bool "Enable the sandbox reset test driver"
 	depends on DM_MAILBOX && SANDBOX
drivers/reset/Makefile +1 -0
index 0a044d5..5e027a1 100644
@@ -4,6 +4,7 @@
 #
 
 obj-$(CONFIG_DM_RESET) += reset-uclass.o
+obj-$(CONFIG_GENERIC_RESET) += reset-generic.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset-test.o
 obj-$(CONFIG_STI_RESET) += sti-reset.o
drivers/reset/reset-generic.c new file +111 -0
new file mode 100644
index 0000000..9c45087
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2017 Amit Singh Tomar <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <reset-uclass.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct generic_reset_priv {
+	void __iomem *membase;
+	int max_reset;
+};
+
+#define BITS_PER_BYTE 8
+static int generic_reset_toggle(struct reset_ctl *rst, bool assert)
+{
+	struct generic_reset_priv *priv = dev_get_priv(rst->dev);
+	int reg_width = sizeof(u32);
+	int bank, offset;
+	u32 reg;
+
+	if (rst->id >= priv->max_reset)
+		return -EINVAL;
+
+	bank = rst->id / (reg_width * BITS_PER_BYTE);
+	offset = rst->id % (reg_width * BITS_PER_BYTE);
+
+	reg = readl(priv->membase + (bank * reg_width));
+	if (assert)
+		writel(reg & ~BIT(offset), priv->membase + (bank * reg_width));
+	else
+		writel(reg | BIT(offset), priv->membase + (bank * reg_width));
+
+	return 0;
+}
+
+static int generic_reset_assert(struct reset_ctl *rst)
+{
+	return generic_reset_toggle(rst, true);
+}
+
+static int generic_reset_deassert(struct reset_ctl *rst)
+{
+	return generic_reset_toggle(rst, false);
+}
+
+static int generic_reset_free(struct reset_ctl *rst)
+{
+	return 0;
+}
+
+static int generic_reset_request(struct reset_ctl *rst)
+{
+	struct generic_reset_priv *priv = dev_get_priv(rst->dev);
+
+	if (rst->id >= priv->max_reset)
+		return -EINVAL;
+
+	return generic_reset_assert(rst);
+}
+
+struct reset_ops generic_reset_reset_ops = {
+	.free = generic_reset_free,
+	.request = generic_reset_request,
+	.rst_assert = generic_reset_assert,
+	.rst_deassert = generic_reset_deassert,
+};
+
+static const struct udevice_id generic_reset_ids[] = {
+	{ .compatible = "generic-reset" },
+	{ .compatible = "actions,s700-reset" },
+	{ }
+};
+
+static int generic_reset_probe(struct udevice *dev)
+{
+	struct generic_reset_priv *priv = dev_get_priv(dev);
+	fdt_addr_t addr;
+	fdt_size_t size;
+
+	addr = devfdt_get_addr_size_index(dev, 0, &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->max_reset = dev_read_u32_default(dev, "num-resets", -1);
+	if (priv->max_reset == -1)
+		priv->max_reset = size * BITS_PER_BYTE;
+
+	priv->membase = devm_ioremap(dev, addr, size);
+	if (!priv->membase)
+		return -EFAULT;
+
+	return 0;
+}
+
+U_BOOT_DRIVER(generic_reset) = {
+	.name = "generic_reset",
+	.id = UCLASS_RESET,
+	.of_match = generic_reset_ids,
+	.ops = &generic_reset_reset_ops,
+	.probe = generic_reset_probe,
+	.priv_auto_alloc_size = sizeof(struct generic_reset_priv),
+};
#37 lore raw

PATCH v3 16/21 arm: dts: s700: add node for reset controller

In reply to Amit Singh Tomar

This patch adds node for reset controller(found on Action Semi S700 SoC).

Since, there is no upstream Linux binding exist for S700 reset controller, Changes are put in u-boot specific dtsi file.

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 arch/arm/dts/s700-u-boot.dtsi | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
arch/arm/dts/s700-u-boot.dtsi +6 -1
index 642c292..4a33042 100644
@@ -6,6 +6,12 @@
 /{
 	soc {
 		u-boot,dm-pre-reloc;
+
+		reset: reset-controller at e01680a8 {
+			#reset-cells = <1>;
+			compatible = "actions,s700-reset";
+			reg = <0 0xe01680a8 0 0x8>;
+		};
 	};
 };
 
@@ -16,4 +22,3 @@
 &cmu {
 	u-boot,dm-pre-reloc;
 };
-
Signature · 1 line
2.7.4
#38 lore raw

PATCH v3 17/21 owl: Kconfig: Enable dm reset and generic reset

In reply to Amit Singh Tomar

This patch selects CONFIG_DM_RESET and CONFIG_GENERIC_RESET for Action Semi owl soc.

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 arch/arm/Kconfig | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/Kconfig +2 -0
index e6a9d32..42d0f26 100644
@@ -885,10 +885,12 @@ config ARCH_OWL
 	bool "Actions Semi OWL SoCs"
 	select DM
 	select DM_SERIAL
+	select DM_RESET
 	select OWL_SERIAL
 	select CLK
 	select CLK_OWL
 	select OF_CONTROL
+	select GENERIC_RESET
 	imply CMD_DM
 
 config ARCH_QEMU
Signature · 1 line
2.7.4
#39 lore raw

PATCH v3 18/21 net: designware: s700: Add glue code for S700 mac

In reply to Amit Singh Tomar

This patchs adds glue logic to enable designware mac present on Action Semi based S700 SoC, Configures SoC specific bits.

It has been tested on Cubieboard7.

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 arch/arm/include/asm/arch-owl/regs_s700.h |  6 +++
 drivers/net/Kconfig                       |  7 ++++
 drivers/net/Makefile                      |  1 +
 drivers/net/dwmac_s700.c                  | 66 +++++++++++++++++++++++++++++++
 4 files changed, 80 insertions(+)
 create mode 100644 drivers/net/dwmac_s700.c
arch/arm/include/asm/arch-owl/regs_s700.h +6 -0
index a0bd737..b4ed719 100644
@@ -53,4 +53,10 @@
 #define CMU_CVBSPLL		(0x00B8)
 #define CMU_SSTSCLK		(0x00C0)
 
+#define GPIO_MFP_PWM		(0xE01B0000)
+#define MFP_CTL0		(GPIO_MFP_PWM + 0x40)
+#define MFP_CTL1		(GPIO_MFP_PWM + 0x44)
+#define MFP_CTL2		(GPIO_MFP_PWM + 0x48)
+#define MFP_CTL3		(GPIO_MFP_PWM + 0x4C)
+
 #endif
drivers/net/Kconfig +7 -0
index 01d087f..6a5ecf8 100644
@@ -218,6 +218,13 @@ config ETH_DESIGNWARE_SOCFPGA
 	  Altera system manager to correctly interface with the PHY.
 	  This code handles those SoC specifics.
 
+config ETH_DESIGNWARE_S700
+        bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC"
+        depends on DM_ETH && ETH_DESIGNWARE
+        help
+          This provides glue layer to use Synopsys Designware Ethernet MAC
+          present on Actions S700 SoC.
+
 config ETHOC
 	bool "OpenCores 10/100 Mbps Ethernet MAC"
 	help
drivers/net/Makefile +1 -0
index 3099183..b8e766b 100644
@@ -17,6 +17,7 @@ obj-$(CONFIG_CS8900) += cs8900.o
 obj-$(CONFIG_TULIP) += dc2114x.o
 obj-$(CONFIG_ETH_DESIGNWARE) += designware.o
 obj-$(CONFIG_ETH_DESIGNWARE_SOCFPGA) += dwmac_socfpga.o
+obj-$(CONFIG_ETH_DESIGNWARE_S700) += dwmac_s700.o
 obj-$(CONFIG_DRIVER_DM9000) += dm9000x.o
 obj-$(CONFIG_DNET) += dnet.o
 obj-$(CONFIG_E1000) += e1000.o
drivers/net/dwmac_s700.c new file +66 -0

66 lines not on this page · raw message

Signature · 1 line
2.7.4
#40 lore raw

PATCH v3 19/21 arm: dts: s700: add node for ethernet controller

In reply to Amit Singh Tomar

This patch adds node for ethernet controller(found on Action Semi S700 SoC).

Since, there is no upstream Linux binding exist for S700 ethernet controller, Changes are put in u-boot specific dtsi file.

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 arch/arm/dts/s700-u-boot.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
arch/arm/dts/s700-u-boot.dtsi +15 -0
index 4a33042..489d0f5 100644
@@ -12,6 +12,21 @@
 			compatible = "actions,s700-reset";
 			reg = <0 0xe01680a8 0 0x8>;
 		};
+
+		gmac:  ethernet at e0220000 {
+			compatible = "actions,s700-ethernet";
+			reg = <0 0xe0220000 0 0x2000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			local-mac-address = [ 00 18 fe 66 66 66 ];
+			clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
+			clock-names = "ethernet", "rmii_ref";
+			resets = <&reset 55>;
+			reset-names = "ethernet";
+			phy-mode = "rmii";
+
+			status = "okay";
+		};
 	};
 };
 
Signature · 1 line
2.7.4
#41 lore raw

PATCH v3 20/21 owl: Kconfig: Enable dm eth for OWL platform

In reply to Amit Singh Tomar

This patch selects CONFIG_DM_ETH(ethernet driver is base on DM model) for Action semi owl SoC.

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 arch/arm/Kconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/Kconfig +1 -0
index 42d0f26..fe57cae 100644
@@ -884,6 +884,7 @@ config ARCH_MX5
 config ARCH_OWL
 	bool "Actions Semi OWL SoCs"
 	select DM
+	select DM_ETH
 	select DM_SERIAL
 	select DM_RESET
 	select OWL_SERIAL
Signature · 1 line
2.7.4
#42 lore raw

PATCH v3 21/21 configs: Enable mac and phy configs

In reply to Amit Singh Tomar

This patch adds MAC and PHY related configs(needed for proper ethernet operations) for Action Semi S700 SoC.

---
Changes since v2:
* Newly added patch, not there in v2/v1.

---
 configs/cubieboard7_defconfig | 4 ++++
 1 file changed, 4 insertions(+)
configs/cubieboard7_defconfig +4 -0
index 0459997..59c8705 100644
@@ -13,4 +13,8 @@ CONFIG_SYS_PROMPT="U-Boot => "
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_TIMER=y
+CONFIG_ETH_DESIGNWARE_S700=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_REALTEK=y
+CONFIG_RTL8201F_PHY_S700_RMII_TIMINGS=y
 CONFIG_DEFAULT_DEVICE_TREE="s700-cubieboard7"
Signature · 1 line
2.7.4
#43 lore raw

v3 cover Actions S700 SoC support

In reply to Amit Singh Tomar

Hi Amit,

Quoted 26 lines · Amit Singh Tomar

Hi,

This is continuation of work[1], submitted(v2) almost a year back.

It adds Cubieboard7[1] support based on Action Semi's S700 SoC[2], It's Quad-core ARMv8 SoC with Cortex-A53 cores. Peripheral like UART seems to be compatible with S900 SoC(basic support for it is alreay present in u-boot).

First few patches(from 1/21 to 3/21) consolidates Actions Semiconductor SoCs support in u-boot(mostly insprired by SUXNI as suggested by Andre). Idea is to move every bit out from board/ucRobotics into arch/arm/mach-owl. It allows different SoCs to be driven by single "soc and Kconfig" file. It also includes common clock driver for S700 and S900. Patches(from 4/21 to 6/21 and 10/21 to 12/21) enables S700 SoC support alongwith Cubieboard7 board.

While at it, took the opportunity to sync S900 DT sources and bindings(patches from 7/21 to 8/21) with Linux(tag v5.5-rc6) and it is compiled-tested.

Patch(9/21) uses same name for ethernet clock binding and if it's ok, would like to send it to LKML as well.

Patches(from 13/21 to 14/21) adds support for RTL 8201F PHY module and introduce configuration option "RTL8201F_PHY_S700_RMII_TIMINGS" to fulfill specific timing requirements for S700.

Patches(from 15/21 to 17/21) adds support for generic reset controller, originally used for NEXELL[3] series but never gets merged and it can be used for S700.

Quoted 8 lines

Patches(from 18/21 to 21/21) are there to enable Ethenet support in S700, MAC is based on Designware IP These patches re-uses the existing driver(drivers/net/designware.c) and programs SoC specific bits to enable ethernet. SoC specific glue code is kept in dwmac_s700.c file, did it this way as found it more cleaner(but having said that I am not really sure, if it's bit of a overkill to have it) or we can keep this glue code somewhere in machine file?

S700 support is tested[4] on Cubieboard7 board and S900 support is just compiled tested.

Sorry for the late reply. Got swamped with lot of stuffs :(

Thanks a lot for the series! I will review it soon and test it on my S900 based Bubblegum 96 board.

Thanks,
Mani

Quoted 115 lines

Also, patches are rebased upon following commit:
2c871f9e084b2c03d1961884228a6901387ab8d6 Merge branch '2020-01-22-master-imports'

Thanks
-Amit

[1]: https://patchwork.ozlabs.org/cover/1020286/
[2]: http://www.actions-semi.com/en/productview.aspx?id=225
[3]: https://lists.denx.de/pipermail/u-boot/2017-November/313135.html
[4]: https://paste.ubuntu.com/p/GkFPn2xJfn/

Amit Singh Tomar (21):
arm: actions: Add common framework for Actions Semi SoCs
arm: actions: rename sysmap-s900 to sysmap-owl
clk: actions: Add common clock driver
arm: add support Actions Semi S700
arm: actions: add S700 SoC device tree
actions:s700: add u-boot specific dts file
arm: dts: sync dts for Action Semi S900
actions: s900: add u-boot specific dts file
arm: dts: Use consistent name "CLK_ETHERNET" for the Ethernet clock
binding
serial: actions: add uart support for s700
arm: add Cubieboard7 board support
actions: add Cubieboard7 README
net: phy: realtek: Add support for RTL8201F PHY module.
net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust
rx/tx timings
reset: add driver for generic reset controllers
arm: dts: s700: add node for reset controller
owl: Kconfig: Enable dm reset and generic reset
net: designware: s700: Add glue code for S700 mac
arm: dts: s700: add node for ethernet controller
owl: Kconfig: Enable dm eth for OWL platform
configs: Enable mac and phy configs

 MAINTAINERS                                    |   2 +
 arch/arm/Kconfig                               |   8 +-
 arch/arm/dts/Makefile                          |   6 +-
 arch/arm/dts/s700-cubieboard7.dts              |  39 +++
 arch/arm/dts/s700-u-boot.dtsi                  |  39 +++
 arch/arm/dts/s700.dtsi                         | 248 +++++++++++++++++++
 arch/arm/dts/s900-u-boot.dtsi                  |  17 ++
 arch/arm/dts/s900.dtsi                         | 322 +++++++++++++++++++++++--
 arch/arm/include/asm/arch-owl/clk_s900.h       |  57 -----
 arch/arm/include/asm/arch-owl/regs_s700.h      |  62 +++++
 arch/arm/mach-owl/Kconfig                      |  35 +--
 arch/arm/mach-owl/Makefile                     |   3 +-
 arch/arm/mach-owl/README.cubieboard7           |  88 +++++++
 arch/arm/mach-owl/soc.c                        |  57 +++++
 arch/arm/mach-owl/sysmap-owl.c                 |  32 +++
 arch/arm/mach-owl/sysmap-s900.c                |  32 ---
 board/ucRobotics/bubblegum_96/Kconfig          |  15 --
 board/ucRobotics/bubblegum_96/MAINTAINERS      |   6 -
 board/ucRobotics/bubblegum_96/Makefile         |   3 -
 board/ucRobotics/bubblegum_96/bubblegum_96.c   |  57 -----
 configs/bubblegum_96_defconfig                 |   7 +-
 configs/cubieboard7_defconfig                  |  20 ++
 drivers/clk/owl/Kconfig                        |   8 +-
 drivers/clk/owl/Makefile                       |   2 +-
 drivers/clk/owl/clk_owl.c                      | 159 ++++++++++++
 drivers/clk/owl/clk_owl.h                      |  65 +++++
 drivers/clk/owl/clk_s900.c                     | 137 -----------
 drivers/net/Kconfig                            |   7 +
 drivers/net/Makefile                           |   1 +
 drivers/net/dwmac_s700.c                       |  66 +++++
 drivers/net/phy/Kconfig                        |   9 +
 drivers/net/phy/realtek.c                      |  55 +++++
 drivers/reset/Kconfig                          |   6 +
 drivers/reset/Makefile                         |   1 +
 drivers/reset/reset-generic.c                  | 111 +++++++++
 drivers/serial/serial_owl.c                    |   1 +
 include/configs/bubblegum_96.h                 |  40 ---
 include/configs/owl-common.h                   |  40 +++
 include/configs/s700.h                         |  13 +
 include/configs/s900.h                         |  16 ++
 include/dt-bindings/clock/actions,s700-cmu.h   | 118 +++++++++
 include/dt-bindings/clock/actions,s900-cmu.h   | 129 ++++++++++
 include/dt-bindings/clock/s900_cmu.h           |  77 ------
 include/dt-bindings/reset/actions,s700-reset.h |  34 +++
 include/dt-bindings/reset/actions,s900-reset.h |  65 +++++
 45 files changed, 1835 insertions(+), 480 deletions(-)
 create mode 100644 arch/arm/dts/s700-cubieboard7.dts
 create mode 100644 arch/arm/dts/s700-u-boot.dtsi
 create mode 100644 arch/arm/dts/s700.dtsi
 create mode 100644 arch/arm/dts/s900-u-boot.dtsi
 delete mode 100644 arch/arm/include/asm/arch-owl/clk_s900.h
 create mode 100644 arch/arm/include/asm/arch-owl/regs_s700.h
 create mode 100644 arch/arm/mach-owl/README.cubieboard7
 create mode 100644 arch/arm/mach-owl/soc.c
 create mode 100644 arch/arm/mach-owl/sysmap-owl.c
 delete mode 100644 arch/arm/mach-owl/sysmap-s900.c
 delete mode 100644 board/ucRobotics/bubblegum_96/Kconfig
 delete mode 100644 board/ucRobotics/bubblegum_96/MAINTAINERS
 delete mode 100644 board/ucRobotics/bubblegum_96/Makefile
 delete mode 100644 board/ucRobotics/bubblegum_96/bubblegum_96.c
 create mode 100644 configs/cubieboard7_defconfig
 create mode 100644 drivers/clk/owl/clk_owl.c
 create mode 100644 drivers/clk/owl/clk_owl.h
 delete mode 100644 drivers/clk/owl/clk_s900.c
 create mode 100644 drivers/net/dwmac_s700.c
 create mode 100644 drivers/reset/reset-generic.c
 delete mode 100644 include/configs/bubblegum_96.h
 create mode 100644 include/configs/owl-common.h
 create mode 100644 include/configs/s700.h
 create mode 100644 include/configs/s900.h
 create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h
 create mode 100644 include/dt-bindings/clock/actions,s900-cmu.h
 delete mode 100644 include/dt-bindings/clock/s900_cmu.h
 create mode 100644 include/dt-bindings/reset/actions,s700-reset.h
 create mode 100644 include/dt-bindings/reset/actions,s900-reset.h
Signature · 1 line
2.7.4
author
#44 lore raw

v3 cover Actions S700 SoC support

Hi Mani,

Quoted 5 lines

Sorry for the late reply. Got swamped with lot of stuffs :(

Thanks a lot for the series! I will review it soon and test it on my S900 based Bubblegum 96 board.

No worries, Thanks for the update!

Thanks
-Amit

#45 lore raw

v3 cover Actions S700 SoC support

In reply to Amit Singh Tomar

Hi Amit,

Quoted 26 lines · Amit Singh Tomar

Hi,

This is continuation of work[1], submitted(v2) almost a year back.

It adds Cubieboard7[1] support based on Action Semi's S700 SoC[2], It's Quad-core ARMv8 SoC with Cortex-A53 cores. Peripheral like UART seems to be compatible with S900 SoC(basic support for it is alreay present in u-boot).

First few patches(from 1/21 to 3/21) consolidates Actions Semiconductor SoCs support in u-boot(mostly insprired by SUXNI as suggested by Andre). Idea is to move every bit out from board/ucRobotics into arch/arm/mach-owl. It allows different SoCs to be driven by single "soc and Kconfig" file. It also includes common clock driver for S700 and S900. Patches(from 4/21 to 6/21 and 10/21 to 12/21) enables S700 SoC support alongwith Cubieboard7 board.

While at it, took the opportunity to sync S900 DT sources and bindings(patches from 7/21 to 8/21) with Linux(tag v5.5-rc6) and it is compiled-tested.

Patch(9/21) uses same name for ethernet clock binding and if it's ok, would like to send it to LKML as well.

Patches(from 13/21 to 14/21) adds support for RTL 8201F PHY module and introduce configuration option "RTL8201F_PHY_S700_RMII_TIMINGS" to fulfill specific timing requirements for S700.

Patches(from 15/21 to 17/21) adds support for generic reset controller, originally used for NEXELL[3] series but never gets merged and it can be used for S700.

Quoted 8 lines

Patches(from 18/21 to 21/21) are there to enable Ethenet support in S700, MAC is based on Designware IP These patches re-uses the existing driver(drivers/net/designware.c) and programs SoC specific bits to enable ethernet. SoC specific glue code is kept in dwmac_s700.c file, did it this way as found it more cleaner(but having said that I am not really sure, if it's bit of a overkill to have it) or we can keep this glue code somewhere in machine file?

S700 support is tested[4] on Cubieboard7 board and S900 support is just compiled tested.

I've reviewed most of the patches. Overall this series looks good but seems a bit bulky to me. Can you please split out the Ethernet specific patches and post only the rest?

Once these base S700 patches gets merged, you can submit the Ethernet patches incrementally. Also, I can't apply these patches on u-boot/master. Could you please fix that for next iteration?

It'd be good if you can share a git tree/branch with me for quick testing.

Thanks,
Mani

Quoted 115 lines

Also, patches are rebased upon following commit:
2c871f9e084b2c03d1961884228a6901387ab8d6 Merge branch '2020-01-22-master-imports'

Thanks
-Amit

[1]: https://patchwork.ozlabs.org/cover/1020286/
[2]: http://www.actions-semi.com/en/productview.aspx?id=225
[3]: https://lists.denx.de/pipermail/u-boot/2017-November/313135.html
[4]: https://paste.ubuntu.com/p/GkFPn2xJfn/

Amit Singh Tomar (21):
arm: actions: Add common framework for Actions Semi SoCs
arm: actions: rename sysmap-s900 to sysmap-owl
clk: actions: Add common clock driver
arm: add support Actions Semi S700
arm: actions: add S700 SoC device tree
actions:s700: add u-boot specific dts file
arm: dts: sync dts for Action Semi S900
actions: s900: add u-boot specific dts file
arm: dts: Use consistent name "CLK_ETHERNET" for the Ethernet clock
binding
serial: actions: add uart support for s700
arm: add Cubieboard7 board support
actions: add Cubieboard7 README
net: phy: realtek: Add support for RTL8201F PHY module.
net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust
rx/tx timings
reset: add driver for generic reset controllers
arm: dts: s700: add node for reset controller
owl: Kconfig: Enable dm reset and generic reset
net: designware: s700: Add glue code for S700 mac
arm: dts: s700: add node for ethernet controller
owl: Kconfig: Enable dm eth for OWL platform
configs: Enable mac and phy configs

 MAINTAINERS                                    |   2 +
 arch/arm/Kconfig                               |   8 +-
 arch/arm/dts/Makefile                          |   6 +-
 arch/arm/dts/s700-cubieboard7.dts              |  39 +++
 arch/arm/dts/s700-u-boot.dtsi                  |  39 +++
 arch/arm/dts/s700.dtsi                         | 248 +++++++++++++++++++
 arch/arm/dts/s900-u-boot.dtsi                  |  17 ++
 arch/arm/dts/s900.dtsi                         | 322 +++++++++++++++++++++++--
 arch/arm/include/asm/arch-owl/clk_s900.h       |  57 -----
 arch/arm/include/asm/arch-owl/regs_s700.h      |  62 +++++
 arch/arm/mach-owl/Kconfig                      |  35 +--
 arch/arm/mach-owl/Makefile                     |   3 +-
 arch/arm/mach-owl/README.cubieboard7           |  88 +++++++
 arch/arm/mach-owl/soc.c                        |  57 +++++
 arch/arm/mach-owl/sysmap-owl.c                 |  32 +++
 arch/arm/mach-owl/sysmap-s900.c                |  32 ---
 board/ucRobotics/bubblegum_96/Kconfig          |  15 --
 board/ucRobotics/bubblegum_96/MAINTAINERS      |   6 -
 board/ucRobotics/bubblegum_96/Makefile         |   3 -
 board/ucRobotics/bubblegum_96/bubblegum_96.c   |  57 -----
 configs/bubblegum_96_defconfig                 |   7 +-
 configs/cubieboard7_defconfig                  |  20 ++
 drivers/clk/owl/Kconfig                        |   8 +-
 drivers/clk/owl/Makefile                       |   2 +-
 drivers/clk/owl/clk_owl.c                      | 159 ++++++++++++
 drivers/clk/owl/clk_owl.h                      |  65 +++++
 drivers/clk/owl/clk_s900.c                     | 137 -----------
 drivers/net/Kconfig                            |   7 +
 drivers/net/Makefile                           |   1 +
 drivers/net/dwmac_s700.c                       |  66 +++++
 drivers/net/phy/Kconfig                        |   9 +
 drivers/net/phy/realtek.c                      |  55 +++++
 drivers/reset/Kconfig                          |   6 +
 drivers/reset/Makefile                         |   1 +
 drivers/reset/reset-generic.c                  | 111 +++++++++
 drivers/serial/serial_owl.c                    |   1 +
 include/configs/bubblegum_96.h                 |  40 ---
 include/configs/owl-common.h                   |  40 +++
 include/configs/s700.h                         |  13 +
 include/configs/s900.h                         |  16 ++
 include/dt-bindings/clock/actions,s700-cmu.h   | 118 +++++++++
 include/dt-bindings/clock/actions,s900-cmu.h   | 129 ++++++++++
 include/dt-bindings/clock/s900_cmu.h           |  77 ------
 include/dt-bindings/reset/actions,s700-reset.h |  34 +++
 include/dt-bindings/reset/actions,s900-reset.h |  65 +++++
 45 files changed, 1835 insertions(+), 480 deletions(-)
 create mode 100644 arch/arm/dts/s700-cubieboard7.dts
 create mode 100644 arch/arm/dts/s700-u-boot.dtsi
 create mode 100644 arch/arm/dts/s700.dtsi
 create mode 100644 arch/arm/dts/s900-u-boot.dtsi
 delete mode 100644 arch/arm/include/asm/arch-owl/clk_s900.h
 create mode 100644 arch/arm/include/asm/arch-owl/regs_s700.h
 create mode 100644 arch/arm/mach-owl/README.cubieboard7
 create mode 100644 arch/arm/mach-owl/soc.c
 create mode 100644 arch/arm/mach-owl/sysmap-owl.c
 delete mode 100644 arch/arm/mach-owl/sysmap-s900.c
 delete mode 100644 board/ucRobotics/bubblegum_96/Kconfig
 delete mode 100644 board/ucRobotics/bubblegum_96/MAINTAINERS
 delete mode 100644 board/ucRobotics/bubblegum_96/Makefile
 delete mode 100644 board/ucRobotics/bubblegum_96/bubblegum_96.c
 create mode 100644 configs/cubieboard7_defconfig
 create mode 100644 drivers/clk/owl/clk_owl.c
 create mode 100644 drivers/clk/owl/clk_owl.h
 delete mode 100644 drivers/clk/owl/clk_s900.c
 create mode 100644 drivers/net/dwmac_s700.c
 create mode 100644 drivers/reset/reset-generic.c
 delete mode 100644 include/configs/bubblegum_96.h
 create mode 100644 include/configs/owl-common.h
 create mode 100644 include/configs/s700.h
 create mode 100644 include/configs/s900.h
 create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h
 create mode 100644 include/dt-bindings/clock/actions,s900-cmu.h
 delete mode 100644 include/dt-bindings/clock/s900_cmu.h
 create mode 100644 include/dt-bindings/reset/actions,s700-reset.h
 create mode 100644 include/dt-bindings/reset/actions,s900-reset.h
Signature · 1 line
2.7.4