Add QMP V3 USB3 PHY support for SC7180

Convert QMP PHY bindings to DT schema format using json-schema.

Signed-off-by Sandeep Maheswaram <[email protected]>

Reviewed-by Rob Herring <[email protected]>

---
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml      | 311 +++++++++++++++++++++
 .../devicetree/bindings/phy/qcom-qmp-phy.txt       | 242 ----------------
 2 files changed, 311 insertions(+), 242 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
 delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt

Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml new file +311 -0

new file mode 100644
index 0000000..7da2be6
@@ -0,0 +1,311 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm QMP PHY controller
+
+maintainers:
+  - Manu Gautam <[email protected]>
+
+description:
+  QMP phy controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq8074-qmp-pcie-phy
+      - qcom,msm8996-qmp-pcie-phy
+      - qcom,msm8996-qmp-ufs-phy
+      - qcom,msm8996-qmp-usb3-phy
+      - qcom,msm8998-qmp-pcie-phy
+      - qcom,msm8998-qmp-ufs-phy
+      - qcom,msm8998-qmp-usb3-phy
+      - qcom,sdm845-qhp-pcie-phy
+      - qcom,sdm845-qmp-pcie-phy
+      - qcom,sdm845-qmp-ufs-phy
+      - qcom,sdm845-qmp-usb3-uni-phy
+      - qcom,sm8150-qmp-ufs-phy
+
+  reg:
+    items:
+      - description: Address and length of PHY's common serdes block.
+
+  "#clock-cells":
+     enum: [ 1, 2 ]
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names:
+    minItems: 1
+    maxItems: 3
+
+  vdda-phy-supply:
+    description:
+        Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+        Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  vddp-ref-clk-supply:
+    description:
+        Phandle to a regulator supply to any specific refclk
+        pll block.
+
+#Required nodes:
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description:
+      Each device node of QMP phy is required to have as many child nodes as
+      the number of lanes the PHY has.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+            - description: Phy common block aux clock.
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+            - description: phy's ahb cfg block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+            - const: cfg
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-usb3-phy
+              - qcom,msm8998-qmp-pcie-phy
+              - qcom,msm8998-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+             - const: phy
+             - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: 19.2 MHz ref clk.
+        clock-names:
+          items:
+            - const: ref
+        resets:
+          items:
+            - description: PHY reset in the UFS controller.
+        reset-names:
+          items:
+            - const: ufsphy
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-ufs-phy
+              - qcom,sdm845-qmp-ufs-phy
+              - qcom,sm8150-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: 19.2 MHz ref clk.
+            - description: Phy reference aux clock.
+        clock-names:
+          items:
+            - const: ref
+            - const: ref_aux
+        resets:
+          items:
+            - description: PHY reset in the UFS controller.
+        reset-names:
+          items:
+            - const: ufsphy
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pipe clk.
+        clock-names:
+          items:
+            - const: pipe_clk
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-qhp-pcie-phy
+              - qcom,sdm845-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+            - description: Phy refgen clk.
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: refgen
+        resets:
+          items:
+            - description: reset of phy block.
+        reset-names:
+          items:
+            - const: phy
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    usb_2_qmpphy: phy-wrapper@88eb000 {
+        compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+        reg = <0 0x088eb000 0 0x18c>;
+        #clock-cells = <1>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+                 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+        resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+                 <&gcc GCC_USB3_PHY_SEC_BCR>;
+        reset-names = "phy", "common";
+
+        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+        vdda-pll-supply = <&vdda_usb2_ss_core>;
+
+            usb_2_ssphy: phy@88eb200 {
+                reg = <0 0x088eb200 0 0x128>,
+                      <0 0x088eb400 0 0x1fc>,
+                      <0 0x088eb800 0 0x218>,
+                      <0 0x088eb600 0 0x70>;
+                #clock-cells = <0>;
+                #phy-cells = <0>;
+                clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+                clock-names = "pipe0";
+                clock-output-names = "usb3_uni_phy_pipe_clk_src";
+            };
+        };

Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt deleted +0 -242

deleted file mode 100644
index 54d6f8d..0000000
@@ -1,242 +0,0 @@
-Qualcomm QMP PHY controller
-===========================
-
-QMP phy controller supports physical layer functionality for a number of
-controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
-
-Required properties:
- - compatible: compatible list, contains:
-	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
-	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
-	       "qcom,msm8996-qmp-ufs-phy" for 14nm UFS phy on msm8996,
-	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
-	       "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
-	       "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
-	       "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998,
-	       "qcom,sdm845-qhp-pcie-phy" for QHP PCIe phy on sdm845,
-	       "qcom,sdm845-qmp-pcie-phy" for QMP PCIe phy on sdm845,
-	       "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
-	       "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
-	       "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845,
-	       "qcom,sm8150-qmp-ufs-phy" for UFS QMP phy on sm8150.
-
-- reg:
-  - index 0: address and length of register set for PHY's common
-             serdes block.
-  - index 1: address and length of the DP_COM control block (for
-             "qcom,sdm845-qmp-usb3-phy" only).
-
-- reg-names:
-  - For "qcom,sdm845-qmp-usb3-phy":
-    - Should be: "reg-base", "dp_com"
-  - For all others:
-    - The reg-names property shouldn't be defined.
-
- - #address-cells: must be 1
- - #size-cells: must be 1
- - ranges: must be present
-
- - clocks: a list of phandles and clock-specifier pairs,
-	   one for each entry in clock-names.
- - clock-names: "cfg_ahb" for phy config clock,
-		"aux" for phy aux clock,
-		"ref" for 19.2 MHz ref clk,
-		"com_aux" for phy common block aux clock,
-		"ref_aux" for phy reference aux clock,
-
-		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8996-qmp-ufs-phy" must contain:
-			"ref".
-		For "qcom,msm8996-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8998-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8998-qmp-ufs-phy" must contain:
-			"ref", "ref_aux".
-		For "qcom,msm8998-qmp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,sdm845-qhp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref", "refgen".
-		For "qcom,sdm845-qmp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref", "refgen".
-		For "qcom,sdm845-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref", "com_aux".
-		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
-			"aux", "cfg_ahb", "ref", "com_aux".
-		For "qcom,sdm845-qmp-ufs-phy" must contain:
-			"ref", "ref_aux".
-		For "qcom,sm8150-qmp-ufs-phy" must contain:
-			"ref", "ref_aux".
-
- - resets: a list of phandles and reset controller specifier pairs,
-	   one for each entry in reset-names.
- - reset-names: "phy" for reset of phy block,
-		"common" for phy common block reset,
-		"cfg" for phy's ahb cfg block reset,
-		"ufsphy" for the PHY reset in the UFS controller.
-
-		For "qcom,ipq8074-qmp-pcie-phy" must contain:
-			"phy", "common".
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-			"phy", "common", "cfg".
-		For "qcom,msm8996-qmp-ufs-phy": must contain:
-			"ufsphy".
-		For "qcom,msm8996-qmp-usb3-phy" must contain
-			"phy", "common".
-		For "qcom,msm8998-qmp-usb3-phy" must contain
-			"phy", "common".
-		For "qcom,msm8998-qmp-ufs-phy": must contain:
-			"ufsphy".
-		For "qcom,msm8998-qmp-pcie-phy" must contain:
-			"phy", "common".
-		For "qcom,sdm845-qhp-pcie-phy" must contain:
-			"phy".
-		For "qcom,sdm845-qmp-pcie-phy" must contain:
-			"phy".
-		For "qcom,sdm845-qmp-usb3-phy" must contain:
-			"phy", "common".
-		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
-			"phy", "common".
-		For "qcom,sdm845-qmp-ufs-phy": must contain:
-			"ufsphy".
-		For "qcom,sm8150-qmp-ufs-phy": must contain:
-			"ufsphy".
-
- - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
- - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
-
-Optional properties:
- - vddp-ref-clk-supply: Phandle to a regulator supply to any specific refclk
-			pll block.
-
-Required nodes:
- - Each device node of QMP phy is required to have as many child nodes as
-   the number of lanes the PHY has.
-
-Required properties for child nodes of PCIe PHYs (one child per lane):
- - reg: list of offset and length pairs of register sets for PHY blocks -
-	tx, rx, pcs, and pcs_misc (optional).
- - #phy-cells: must be 0
-
-Required properties for a single "lanes" child node of non-PCIe PHYs:
- - reg: list of offset and length pairs of register sets for PHY blocks
-	For 1-lane devices:
-		tx, rx, pcs, and (optionally) pcs_misc
-	For 2-lane devices:
-		tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc
- - #phy-cells: must be 0
-
-Required properties for child node of PCIe and USB3 qmp phys:
- - clocks: a list of phandles and clock-specifier pairs,
-	   one for each entry in clock-names.
- - clock-names: Must contain following:
-		 "pipe<lane-number>" for pipe clock specific to each lane.
- - clock-output-names: Name of the PHY clock that will be the parent for
-		       the above pipe clock.
-	For "qcom,ipq8074-qmp-pcie-phy":
-		- "pcie20_phy0_pipe_clk"	Pipe Clock parent
-			(or)
-		  "pcie20_phy1_pipe_clk"
- - #clock-cells: must be 0
-    - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then
-      gate-controlled by the gcc.
-
-Required properties for child node of PHYs with lane reset, AKA:
-	"qcom,msm8996-qmp-pcie-phy"
- - resets: a list of phandles and reset controller specifier pairs,
-	   one for each entry in reset-names.
- - reset-names: Must contain following:
-		 "lane<lane-number>" for reset specific to each lane.
-
-Example:
-	phy@34000 {
-		compatible = "qcom,msm8996-qmp-pcie-phy";
-		reg = <0x34000 0x488>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
-			<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
-			<&gcc GCC_PCIE_CLKREF_CLK>;
-		clock-names = "aux", "cfg_ahb", "ref";
-
-		vdda-phy-supply = <&pm8994_l28>;
-		vdda-pll-supply = <&pm8994_l12>;
-
-		resets = <&gcc GCC_PCIE_PHY_BCR>,
-			<&gcc GCC_PCIE_PHY_COM_BCR>,
-			<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
-		reset-names = "phy", "common", "cfg";
-
-		pciephy_0: lane@35000 {
-			reg = <0x35000 0x130>,
-				<0x35200 0x200>,
-				<0x35400 0x1dc>;
-			#clock-cells = <0>;
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-			clock-names = "pipe0";
-			clock-output-names = "pcie_0_pipe_clk_src";
-			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
-			reset-names = "lane0";
-		};
-
-		pciephy_1: lane@36000 {
-		...
-		...
-	};
-
-	phy@88eb000 {
-		compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-		reg = <0x88eb000 0x18c>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-			 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-			 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-			 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-		clock-names = "aux", "cfg_ahb", "ref", "com_aux";
-
-		resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-			 <&gcc GCC_USB3_PHY_SEC_BCR>;
-		reset-names = "phy", "common";
-
-		lane@88eb200 {
-			reg = <0x88eb200 0x128>,
-			      <0x88eb400 0x1fc>,
-			      <0x88eb800 0x218>,
-			      <0x88eb600 0x70>;
-			#clock-cells = <0>;
-			#phy-cells = <0>;
-			clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-			clock-names = "pipe0";
-			clock-output-names = "usb3_uni_phy_pipe_clk_src";
-		};
-	};
-
-	phy@1d87000 {
-		compatible = "qcom,sdm845-qmp-ufs-phy";
-		reg = <0x1d87000 0x18c>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-names = "ref",
-			      "ref_aux";
-		clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-			 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
-		lanes@1d87400 {
-			reg = <0x1d87400 0x108>,
-			      <0x1d87600 0x1e0>,
-			      <0x1d87c00 0x1dc>,
-			      <0x1d87800 0x108>,
-			      <0x1d87a00 0x1e0>;
-			#phy-cells = <0>;
-		};
-	};

Signature · 2 lines

QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Split out the dt bindings for USB3 DP PHY from qcom,qmp bindings for modularity.

Signed-off-by Sandeep Maheswaram <[email protected]>

---
 .../bindings/phy/qcom,qmp-usb3-dp-phy.yaml         | 135 +++++++++++++++++++++
 1 file changed, 135 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml

Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml new file +135 -0

new file mode 100644
index 0000000..6055786
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm QMP USB3 DP PHY controller
+
+maintainers:
+  - Manu Gautam <[email protected]>
+
+properties:
+  compatible:
+    const:
+      qcom,sdm845-qmp-usb3-phy
+  reg:
+    items:
+      - description: Address and length of PHY's common serdes block.
+      - description: Address and length of the DP_COM control block.
+
+  reg-names:
+    items:
+      - const: reg-base
+      - const: dp_com
+
+  "#clock-cells":
+     enum: [ 1, 2 ]
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  clocks:
+    items:
+      - description: Phy aux clock.
+      - description: Phy config clock.
+      - description: 19.2 MHz ref clk.
+      - description: Phy common block aux clock.
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+      - const: com_aux
+
+  resets:
+    items:
+      - description: reset of phy block.
+      - description: phy common block reset.
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+
+  vdda-phy-supply:
+    description:
+        Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+        Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  vddp-ref-clk-supply:
+    description:
+        Phandle to a regulator supply to any specific refclk
+        pll block.
+
+#Required nodes:
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description:
+      Each device node of QMP phy is required to have as many child nodes as
+      the number of lanes the PHY has.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#clock-cells"
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    usb_1_qmpphy: phy-wrapper@88e9000 {
+        compatible = "qcom,sdm845-qmp-usb3-phy";
+        reg = <0 0x088e9000 0 0x18c>,
+              <0 0x088e8000 0 0x10>;
+        reg-names = "reg-base", "dp_com";
+        #clock-cells = <1>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+                 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+        resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+                 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+        reset-names = "phy", "common";
+
+        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+        vdda-pll-supply = <&vdda_usb2_ss_core>;
+
+        usb_1_ssphy: phy@88e9200 {
+                reg = <0 0x088e9200 0 0x128>,
+                      <0 0x088e9400 0 0x200>,
+                      <0 0x088e9c00 0 0x218>,
+                      <0 0x088e9600 0 0x128>,
+                      <0 0x088e9800 0 0x200>,
+                      <0 0x088e9a00 0 0x100>;
+                #clock-cells = <0>;
+                #phy-cells = <0>;
+                clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+                clock-names = "pipe0";
+                clock-output-names = "usb3_phy_pipe_clk_src";
+            };
+        };

Signature · 2 lines

QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation