ARM: dts: gw552x: add USB OTG support
Subsystems (2)
PATCH 1/1 ARM: dts: gw552x: add USB OTG support
The GW552x-B board revision adds USB OTG support.
Enable the device-tree node and configure the OTG_ID pin.
--- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
arch/arm/boot/dts/imx6qdl-gw552x.dtsi +14 -2
@@ -12,8 +12,6 @@ led1 = &led1; led2 = &led2; nand = &gpmi; - usb0 = &usbh1; - usb1 = &usbotg; }; chosen {
@@ -258,6 +256,14 @@ status = "okay"; }; +&usbotg { + vbus-supply = <®_5p0v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>;
@@ -359,6 +365,12 @@ >; }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
Signature · 7 lines
2.7.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 14 lines · Tim Harvey
The GW552x-B board revision adds USB OTG support.
Enable the device-tree node and configure the
OTG_IDpin.Signed-off-by Tim Harvey <[email protected]>--- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)arch/arm/boot/dts/imx6qdl-gw552x.dtsi +0
-0
arch/arm/boot/dts/imx6qdl-gw552x.dtsi line 16
Quoted 5 lines
arch/arm/boot/dts/imx6qdl-gw552x.dtsi +0
-2@@ -12,8 +12,6 @@ led1 = &led1; led2 = &led2; nand = &gpmi; - usb0 = &usbh1; - usb1 = &usbotg;
Have some comments about this change in the commit log?
Shawn
Quoted 34 lines
arch/arm/boot/dts/imx6qdl-gw552x.dtsi +14
-0}; chosen {@@ -258,6 +256,14 @@ status = "okay"; }; +&usbotg { + vbus-supply = <®_5p0v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>;@@ -359,6 +365,12 @@ >; }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0Signature · 1 line
2.7.4
Quoted 11 lines · Shawn Guo
Quoted 9 lines · Tim Harvey
The GW552x-B board revision adds USB OTG support.
Enable the device-tree node and configure the
OTG_IDpin.Signed-off-by Tim Harvey <[email protected]>--- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
Quoted 13 lines
arch/arm/boot/dts/imx6qdl-gw552x.dtsi line 16
Quoted 10 lines
arch/arm/boot/dts/imx6qdl-gw552x.dtsi +0
-2@@ -12,8 +12,6 @@ led1 = &led1; led2 = &led2; nand = &gpmi; - usb0 = &usbh1; - usb1 = &usbotg;Have some comments about this change in the commit log?
Shawn,
I shouldn't have removed those... will submit a v2. Thank you for catching this!
Tim
PATCH v2 1/1 ARM: dts: gw552x: add USB OTG support
In reply to Tim HarveyThe GW552x-B board revision adds USB OTG support.
Enable the device-tree node and configure the OTG_ID pin.
--- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
arch/arm/boot/dts/imx6qdl-gw552x.dtsi +14 -0
@@ -258,6 +258,14 @@ status = "okay"; }; +&usbotg { + vbus-supply = <®_5p0v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>;
@@ -359,6 +367,12 @@ >; }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
Signature · 1 line
2.7.4
Quoted 5 lines · Tim Harvey
The GW552x-B board revision adds USB OTG support.
Enable the device-tree node and configure the
OTG_IDpin.Signed-off-by Tim Harvey <[email protected]>
Changed prefix to 'ARM: dts: imx6qdl-gw552x: ' and applied patch.
Shawn
Quoted 39 lines
--- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)arch/arm/boot/dts/imx6qdl-gw552x.dtsi +14
-0@@ -258,6 +258,14 @@ status = "okay"; }; +&usbotg { + vbus-supply = <®_5p0v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>;@@ -359,6 +367,12 @@ >; }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0Signature · 1 line
2.7.4