Skip to contentSkip to conversation

Enable stmpe811 on stm32f429-disco board

PATCH New [email protected] 1 participant 2 messages May 7, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Enable stmpe811 on stm32f429-disco board

This patchset has following one patchs changed in V2 based on V1

Changes in V2:

[Patch V2 3/4]: remove id, blocks, irq-trigger from dts node.

Changes in V1:

[Patch 1/4]: add I2C3 support on STM32F429 SoC [Patch 2/4]: Add pin map for I2C3 controller on stm32f4 [Patch 3/4]: enable stmpe811 on stm32429-disco board [Patch 4/4]; Fix stmpe811 get xyz data timeout issue

#1 lore raw

PATCH v2 1/4 ARM: dts: stm32: add I2C3 support on STM32F429 SoC

From: dillon min <[email protected]>

This patch adds I2C3 instances of the STM32F429 SoC

---
 arch/arm/boot/dts/stm32f429.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
arch/arm/boot/dts/stm32f429.dtsi +12 -0
index d777069..257b843 100644
@@ -402,6 +402,18 @@
 			status = "disabled";
 		};
 
+		i2c3: i2c@40005c00 {
+			compatible = "st,stm32f4-i2c";
+			reg = <0x40005c00 0x400>;
+			interrupts = <72>,
+				     <73>;
+			resets = <&rcc STM32F4_APB1_RESET(I2C3)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C3)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		dac: dac@40007400 {
 			compatible = "st,stm32f4-dac-core";
 			reg = <0x40007400 0x400>;
Signature · 1 line
2.7.4