Skip to contentSkip to conversation

dt-bindings: thermal: Convert qoriq to json-schema

PATCH Applied Anson Huang 2 participants 2 messages Jun 4, 2020 – Jun 15, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 dt-bindings: thermal: Convert qoriq to json-schema

Convert the qoriq thermal binding to DT schema format using json-schema

---
Changes since V4:
- add "additionalProperties: false"

---
 .../devicetree/bindings/thermal/qoriq-thermal.txt  |  71 -------------
 .../devicetree/bindings/thermal/qoriq-thermal.yaml | 114 +++++++++++++++++++++
 2 files changed, 114 insertions(+), 71 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
 create mode 100644 Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
Documentation/devicetree/bindings/thermal/qoriq-thermal.txt deleted +0 -71
deleted file mode 100644
index 28f2cba..0000000
@@ -1,71 +0,0 @@
-* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
-
-Required properties:
-- compatible : Must include "fsl,qoriq-tmu" or "fsl,imx8mq-tmu". The
-	version of the device is determined by the TMU IP Block Revision
-	Register (IPBRR0) at offset 0x0BF8.
-	Table of correspondences between IPBRR0 values and example  chips:
-		Value           Device
-		----------      -----
-		0x01900102      T1040
-- reg : Address range of TMU registers.
-- interrupts : Contains the interrupt for TMU.
-- fsl,tmu-range : The values to be programmed into TTRnCR, as specified by
-	the SoC reference manual. The first cell is TTR0CR, the second is
-	TTR1CR, etc.
-- fsl,tmu-calibration : A list of cell pairs containing temperature
-	calibration data, as specified by the SoC reference manual.
-	The first cell of each pair is the value to be written to TTCFGR,
-	and the second is the value to be written to TSCFGR.
-- #thermal-sensor-cells : Must be 1. The sensor specifier is the monitoring
-	site ID, and represents the "n" in TRITSRn and TRATSRn.
-
-Optional property:
-- little-endian : If present, the TMU registers are little endian. If absent,
-	the default is big endian.
-- clocks : the clock for clocking the TMU silicon.
-
-Example:
-
-tmu@f0000 {
-	compatible = "fsl,qoriq-tmu";
-	reg = <0xf0000 0x1000>;
-	interrupts = <18 2 0 0>;
-	fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>;
-	fsl,tmu-calibration = <0x00000000 0x00000025
-			       0x00000001 0x00000028
-			       0x00000002 0x0000002d
-			       0x00000003 0x00000031
-			       0x00000004 0x00000036
-			       0x00000005 0x0000003a
-			       0x00000006 0x00000040
-			       0x00000007 0x00000044
-			       0x00000008 0x0000004a
-			       0x00000009 0x0000004f
-			       0x0000000a 0x00000054
-
-			       0x00010000 0x0000000d
-			       0x00010001 0x00000013
-			       0x00010002 0x00000019
-			       0x00010003 0x0000001f
-			       0x00010004 0x00000025
-			       0x00010005 0x0000002d
-			       0x00010006 0x00000033
-			       0x00010007 0x00000043
-			       0x00010008 0x0000004b
-			       0x00010009 0x00000053
-
-			       0x00020000 0x00000010
-			       0x00020001 0x00000017
-			       0x00020002 0x0000001f
-			       0x00020003 0x00000029
-			       0x00020004 0x00000031
-			       0x00020005 0x0000003c
-			       0x00020006 0x00000042
-			       0x00020007 0x0000004d
-			       0x00020008 0x00000056
-
-			       0x00030000 0x00000012
-			       0x00030001 0x0000001d>;
-	#thermal-sensor-cells = <1>;
-};
Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml new file +114 -0

114 lines not on this page · raw message

Signature · 1 line
2.7.4
maintainer Applied
#1 lore raw
Quoted 6 lines · Anson Huang

Convert the qoriq thermal binding to DT schema format using json-schema

---
Changes since V4:
- add "additionalProperties: false"

Quoted 7 lines
---
 .../devicetree/bindings/thermal/qoriq-thermal.txt  |  71 -------------
 .../devicetree/bindings/thermal/qoriq-thermal.yaml | 114 +++++++++++++++++++++
 2 files changed, 114 insertions(+), 71 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
 create mode 100644 Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml

Applied, thanks!