Skip to contentSkip to conversation

Add support for rk3399 based targets

PATCH New sunil at amarulasolutions.com 2 participants 13 messages Jun 13, 2020 – Jul 4, 2020

lore
Share & tools
lore
#0 lore raw

cover Add support for rk3399 based targets

From: Suniel Mahesh <[email protected]>

This patch series adds support for targets from friendlyarm, pine64 and orangepi, based on rk3399 SOC.

Merged two patch series at https://patchwork.ozlabs.org/project/buildroot/list/?series=174279,
into this series.

patch #1, #2, are basically a resend. patch #3, #4 are new patches.

Suniel Mahesh (4):
configs/rockpro64: new defconfig
configs/orangepi_rk3399: new defconfig
configs/nanopi_m4: new defconfig
configs/nanopc_t4: new defconfig

 .gitlab-ci.yml                               |  4 ++
 DEVELOPERS                                   |  8 ++++
 board/friendlyarm/nanopc-t4/extlinux.conf    |  4 ++
 board/friendlyarm/nanopc-t4/genimage.cfg     | 39 ++++++++++++++++++
 board/friendlyarm/nanopc-t4/post-build.sh    |  5 +++
 board/friendlyarm/nanopc-t4/readme.txt       | 45 +++++++++++++++++++++
 board/friendlyarm/nanopi-m4/extlinux.conf    |  4 ++
 board/friendlyarm/nanopi-m4/genimage.cfg     | 39 ++++++++++++++++++
 board/friendlyarm/nanopi-m4/post-build.sh    |  5 +++
 board/friendlyarm/nanopi-m4/readme.txt       | 45 +++++++++++++++++++++
 board/orangepi/orangepi-rk3399/extlinux.conf |  4 ++
 board/orangepi/orangepi-rk3399/genimage.cfg  | 39 ++++++++++++++++++
 board/orangepi/orangepi-rk3399/post-build.sh |  5 +++
 board/orangepi/orangepi-rk3399/readme.txt    | 56 ++++++++++++++++++++++++++
 board/pine64/rockpro64/extlinux.conf         |  4 ++
 board/pine64/rockpro64/genimage.cfg          | 39 ++++++++++++++++++
 board/pine64/rockpro64/post-build.sh         |  5 +++
 board/pine64/rockpro64/readme.txt            | 60 ++++++++++++++++++++++++++++
 configs/nanopc_t4_defconfig                  | 56 ++++++++++++++++++++++++++
 configs/nanopi_m4_defconfig                  | 56 ++++++++++++++++++++++++++
 configs/orangepi_rk3399_defconfig            | 56 ++++++++++++++++++++++++++
 configs/rockpro64_defconfig                  | 56 ++++++++++++++++++++++++++
 22 files changed, 634 insertions(+)
 create mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf
 create mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg
 create mode 100755 board/friendlyarm/nanopc-t4/post-build.sh
 create mode 100644 board/friendlyarm/nanopc-t4/readme.txt
 create mode 100644 board/friendlyarm/nanopi-m4/extlinux.conf
 create mode 100644 board/friendlyarm/nanopi-m4/genimage.cfg
 create mode 100755 board/friendlyarm/nanopi-m4/post-build.sh
 create mode 100644 board/friendlyarm/nanopi-m4/readme.txt
 create mode 100644 board/orangepi/orangepi-rk3399/extlinux.conf
 create mode 100644 board/orangepi/orangepi-rk3399/genimage.cfg
 create mode 100755 board/orangepi/orangepi-rk3399/post-build.sh
 create mode 100644 board/orangepi/orangepi-rk3399/readme.txt
 create mode 100644 board/pine64/rockpro64/extlinux.conf
 create mode 100644 board/pine64/rockpro64/genimage.cfg
 create mode 100755 board/pine64/rockpro64/post-build.sh
 create mode 100644 board/pine64/rockpro64/readme.txt
 create mode 100644 configs/nanopc_t4_defconfig
 create mode 100644 configs/nanopi_m4_defconfig
 create mode 100644 configs/orangepi_rk3399_defconfig
 create mode 100644 configs/rockpro64_defconfig
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/4 configs/rockpro64: new defconfig

From: Suniel Mahesh <[email protected]>

A defconfig for the rockpro64 was added in 59e1077b4ebe79622a454b0a8a840e4349a0440d, but then removed in 10f49213b7e2837ae6ed63fc16fbdaa954ecd87f because an ARM32 compiler was needed to build ATF, and this was not supported back then.

Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced.

Following new changes are introduced in comparision with the older changeset:

- renamed defconfig from pine64_rockpro64 to rockpro64
- updated readme
- using a GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.04
- bump linux to 5.4.35

---
NOTE:
- This patch is a resend. Earlier patch is at:
https://patchwork.ozlabs.org/project/buildroot/list/?series=174279
- bumped linux version from 5.4.36 to 5.4.46
- Changes have been done based on comments by Thomas Pettazzoni on the mailing list.

---
 .gitlab-ci.yml                       |  1 +
 DEVELOPERS                           |  2 ++
 board/pine64/rockpro64/extlinux.conf |  4 +++
 board/pine64/rockpro64/genimage.cfg  | 39 +++++++++++++++++++++++
 board/pine64/rockpro64/post-build.sh |  5 +++
 board/pine64/rockpro64/readme.txt    | 60 ++++++++++++++++++++++++++++++++++++
 configs/rockpro64_defconfig          | 56 +++++++++++++++++++++++++++++++++
 7 files changed, 167 insertions(+)
 create mode 100644 board/pine64/rockpro64/extlinux.conf
 create mode 100644 board/pine64/rockpro64/genimage.cfg
 create mode 100755 board/pine64/rockpro64/post-build.sh
 create mode 100644 board/pine64/rockpro64/readme.txt
 create mode 100644 configs/rockpro64_defconfig
.gitlab-ci.yml +1 -0
index 951f843..6825862 100644
@@ -319,6 +319,7 @@ raspberrypi_defconfig: { extends: .defconfig }
 riotboard_defconfig: { extends: .defconfig }
 roc_pc_rk3399_defconfig: { extends: .defconfig }
 rock64_defconfig: { extends: .defconfig }
+rockpro64_defconfig: { extends: .defconfig }
 roseapplepi_defconfig: { extends: .defconfig }
 s6lx9_microboard_defconfig: { extends: .defconfig }
 sheevaplug_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
index 9a94307..337135b 100644
@@ -2392,7 +2392,9 @@ F:	package/powertop/
 
 N:	Suniel Mahesh <[email protected]>
 F:	board/firefly/
+F:	board/pine64/rockpro64
 F:	configs/roc_pc_rk3399_defconfig
+F:	configs/rockpro64_defconfig
 F:	package/arm-gnu-a-toolchain/
 
 N:	Sven Haardiek <[email protected]>
board/pine64/rockpro64/extlinux.conf new file +4 -0
new file mode 100644
index 0000000..ea081a1
@@ -0,0 +1,4 @@
+label RK3399_ROCKPRO64 linux
+  kernel /Image
+  devicetree /rk3399-rockpro64.dtb
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p4 rw rootwait
board/pine64/rockpro64/genimage.cfg new file +39 -0
new file mode 100644
index 0000000..41358ed
@@ -0,0 +1,39 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"Image",
+			"rk3399-rockpro64.dtb",
+			"extlinux"
+		}
+	}
+	size = 112M
+}
+
+image sdcard.img {
+
+	hdimage {
+		gpt = true
+	}
+
+	partition loader1 {
+		image = "idbloader.img"
+		offset = 32K
+	}
+
+	partition loader2 {
+		image = "u-boot.itb"
+		offset = 8M
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+		offset = 16M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
board/pine64/rockpro64/post-build.sh new file +5 -0
new file mode 100755
index 0000000..ba29375
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/pine64/rockpro64/readme.txt new file +60 -0

60 lines not on this page · raw message

configs/rockpro64_defconfig new file +56 -0

56 lines not on this page · raw message

Signature · 1 line
2.7.4
#2 lore raw

PATCH 1/4 configs/rockpro64: new defconfig

Quoted 22 lines · On Sun, Jun 14, 2020 at 12:02 AM <[email protected]> wrote:

From: Suniel Mahesh <[email protected]>

A defconfig for the rockpro64 was added in 59e1077b4ebe79622a454b0a8a840e4349a0440d, but then removed in 10f49213b7e2837ae6ed63fc16fbdaa954ecd87f because an ARM32 compiler was needed to build ATF, and this was not supported back then.

Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced.

Following new changes are introduced in comparision with the older changeset:

- renamed defconfig from pine64_rockpro64 to rockpro64
- updated readme
- using a GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.04
- bump linux to 5.4.35

Quoted 2 lines

---

#3 lore raw

PATCH 1/4 configs/rockpro64: new defconfig

Quoted 23 lines · Jagan Teki
Quoted 22 lines · On Sun, Jun 14, 2020 at 12:02 AM <[email protected]> wrote:

From: Suniel Mahesh <[email protected]>

A defconfig for the rockpro64 was added in 59e1077b4ebe79622a454b0a8a840e4349a0440d, but then removed in 10f49213b7e2837ae6ed63fc16fbdaa954ecd87f because an ARM32 compiler was needed to build ATF, and this was not supported back then.

Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced.

Following new changes are introduced in comparision with the older changeset:

- renamed defconfig from pine64_rockpro64 to rockpro64
- updated readme
- using a GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.04
- bump linux to 5.4.35

Quoted 5 lines
Quoted 2 lines

---

Hi Thomas and all,

May I know the reason why this patch is not getting picked up. Please let me know,
If something is not making sense. I can rework on them.

Regards
Suniel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200705/04c1ebbd/attachment.html>

#4 lore raw

PATCH 2/4 configs/orangepi_rk3399: new defconfig

In reply to sunil at amarulasolutions.com

From: Suniel Mahesh <[email protected]>

Add initial support for Orangepi RK3399 target with below features:

- U-Boot 2020.04
- Linux 5.4.46
- Default packages from buildroot

---
NOTE:
- This patch is a resend. earlier patch is at:
https://patchwork.ozlabs.org/project/buildroot/list/?series=174279
- bumped linux version from 5.4.36 to 5.4.46
- As suggested by Thomas Pettazzoni, rk3399 targets does not need pylibfdt or pyelftools, but only a host Python interpreter. Remove them and add python, python3 in defconfig.

---
 .gitlab-ci.yml                               |  1 +
 DEVELOPERS                                   |  2 +
 board/orangepi/orangepi-rk3399/extlinux.conf |  4 ++
 board/orangepi/orangepi-rk3399/genimage.cfg  | 39 +++++++++++++++++++
 board/orangepi/orangepi-rk3399/post-build.sh |  5 +++
 board/orangepi/orangepi-rk3399/readme.txt    | 56 ++++++++++++++++++++++++++++
 configs/orangepi_rk3399_defconfig            | 56 ++++++++++++++++++++++++++++
 7 files changed, 163 insertions(+)
 create mode 100644 board/orangepi/orangepi-rk3399/extlinux.conf
 create mode 100644 board/orangepi/orangepi-rk3399/genimage.cfg
 create mode 100755 board/orangepi/orangepi-rk3399/post-build.sh
 create mode 100644 board/orangepi/orangepi-rk3399/readme.txt
 create mode 100644 configs/orangepi_rk3399_defconfig
.gitlab-ci.yml +1 -0
index 6825862..66c7b72 100644
@@ -259,6 +259,7 @@ orangepi_pc_plus_defconfig: { extends: .defconfig }
 orangepi_plus_defconfig: { extends: .defconfig }
 orangepi_prime_defconfig: { extends: .defconfig }
 orangepi_r1_defconfig: { extends: .defconfig }
+orangepi_rk3399_defconfig: { extends: .defconfig }
 orangepi_win_defconfig: { extends: .defconfig }
 orangepi_zero_defconfig: { extends: .defconfig }
 orangepi_zero_plus2_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
index 337135b..6b7421a 100644
@@ -2392,7 +2392,9 @@ F:	package/powertop/
 
 N:	Suniel Mahesh <[email protected]>
 F:	board/firefly/
+F:	board/orangepi/orangepi-rk3399
 F:	board/pine64/rockpro64
+F:	configs/orangepi_rk3399_defconfig
 F:	configs/roc_pc_rk3399_defconfig
 F:	configs/rockpro64_defconfig
 F:	package/arm-gnu-a-toolchain/
board/orangepi/orangepi-rk3399/extlinux.conf new file +4 -0
new file mode 100644
index 0000000..5109625
@@ -0,0 +1,4 @@
+label RK3399_ROCKPRO64 linux
+  kernel /Image
+  devicetree /rk3399-orangepi.dtb
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
board/orangepi/orangepi-rk3399/genimage.cfg new file +39 -0
new file mode 100644
index 0000000..9d63e30
@@ -0,0 +1,39 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"Image",
+			"rk3399-orangepi.dtb",
+			"extlinux"
+		}
+	}
+	size = 112M
+}
+
+image sdcard.img {
+
+	hdimage {
+		gpt = true
+	}
+
+	partition loader1 {
+		image = "idbloader.img"
+		offset = 32K
+	}
+
+	partition loader2 {
+		image = "u-boot.itb"
+		offset = 8M
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+		offset = 16M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
board/orangepi/orangepi-rk3399/post-build.sh new file +5 -0
new file mode 100755
index 0000000..ba29375
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/orangepi/orangepi-rk3399/readme.txt new file +56 -0

56 lines not on this page · raw message

configs/orangepi_rk3399_defconfig new file +56 -0

56 lines not on this page · raw message

Signature · 1 line
2.7.4
#6 lore raw

PATCH 2/4 configs/orangepi_rk3399: new defconfig

Quoted 6 lines · Jagan Teki
Quoted 5 lines · On Sun, Jun 14, 2020 at 12:02 AM <[email protected]> wrote:

From: Suniel Mahesh <[email protected]>

Add initial support for Orangepi RK3399 target with below features:

Quoted 9 lines
Quoted 6 lines

- U-Boot 2020.04
- Linux 5.4.46
- Default packages from buildroot

---

Hi Thomas and all,

May I know the reason why this patch is not getting picked up. Please let me know,
If something is not making sense. I can rework on them.

Regards
Suniel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200705/b2b73b8b/attachment.html>

#7 lore raw

PATCH 3/4 configs/nanopi_m4: new defconfig

In reply to sunil at amarulasolutions.com

From: Suniel Mahesh <[email protected]>

A defconfig for the friendlyarm nanopi-m4 was added in 493c3979a4def978a1137cf8543bf0de50d2615e, but then removed in a24bd8936f57a590f810e14d7828cf1bddce580e because an ARM32 compiler was needed to build ATF, and this was not supported back then.

Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced.

Following new changes are introduced in comparision with the older changeset:
- readme updated
- GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.04
- bump linux to 5.4.46

---
NOTE:
- new patch

---
 .gitlab-ci.yml                            |  1 +
 DEVELOPERS                                |  2 ++
 board/friendlyarm/nanopi-m4/extlinux.conf |  4 +++
 board/friendlyarm/nanopi-m4/genimage.cfg  | 39 +++++++++++++++++++++
 board/friendlyarm/nanopi-m4/post-build.sh |  5 +++
 board/friendlyarm/nanopi-m4/readme.txt    | 45 +++++++++++++++++++++++++
 configs/nanopi_m4_defconfig               | 56 +++++++++++++++++++++++++++++++
 7 files changed, 152 insertions(+)
 create mode 100644 board/friendlyarm/nanopi-m4/extlinux.conf
 create mode 100644 board/friendlyarm/nanopi-m4/genimage.cfg
 create mode 100755 board/friendlyarm/nanopi-m4/post-build.sh
 create mode 100644 board/friendlyarm/nanopi-m4/readme.txt
 create mode 100644 configs/nanopi_m4_defconfig
.gitlab-ci.yml +1 -0
index 66c7b72..4ff0b4b 100644
@@ -227,6 +227,7 @@ mx6sx_udoo_neo_defconfig: { extends: .defconfig }
 mx6udoo_defconfig: { extends: .defconfig }
 nanopi_m1_defconfig: { extends: .defconfig }
 nanopi_m1_plus_defconfig: { extends: .defconfig }
+nanopi_m4_defconfig: { extends: .defconfig }
 nanopi_neo4_defconfig: { extends: .defconfig }
 nanopi_neo_defconfig: { extends: .defconfig }
 nanopi_r1_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
index 6b7421a..220bb34 100644
@@ -2392,8 +2392,10 @@ F:	package/powertop/
 
 N:	Suniel Mahesh <[email protected]>
 F:	board/firefly/
+F:	board/friendlyarm/nanopi-m4
 F:	board/orangepi/orangepi-rk3399
 F:	board/pine64/rockpro64
+F: 	configs/nanopi_m4_defconfig
 F:	configs/orangepi_rk3399_defconfig
 F:	configs/roc_pc_rk3399_defconfig
 F:	configs/rockpro64_defconfig
board/friendlyarm/nanopi-m4/extlinux.conf new file +4 -0
new file mode 100644
index 0000000..fb24f09
@@ -0,0 +1,4 @@
+label RK3399_NANOPI_M4 linux
+  kernel /Image
+  devicetree /rk3399-nanopi-m4.dtb
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
board/friendlyarm/nanopi-m4/genimage.cfg new file +39 -0
new file mode 100644
index 0000000..8a2e981
@@ -0,0 +1,39 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"Image",
+			"rk3399-nanopi-m4.dtb",
+			"extlinux"
+		}
+	}
+	size = 112M
+}
+
+image sdcard.img {
+
+	hdimage {
+		gpt = true
+	}
+
+	partition loader1 {
+		image = "idbloader.img"
+		offset = 32K
+	}
+
+	partition loader2 {
+		image = "u-boot.itb"
+		offset = 8M
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+		offset = 16M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
board/friendlyarm/nanopi-m4/post-build.sh new file +5 -0
new file mode 100755
index 0000000..ba29375
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/friendlyarm/nanopi-m4/readme.txt new file +45 -0

45 lines not on this page · raw message

configs/nanopi_m4_defconfig new file +56 -0

56 lines not on this page · raw message

Signature · 1 line
2.7.4
#8 lore raw

PATCH 3/4 configs/nanopi_m4: new defconfig

Quoted 20 lines · On Sun, Jun 14, 2020 at 12:02 AM <[email protected]> wrote:

From: Suniel Mahesh <[email protected]>

A defconfig for the friendlyarm nanopi-m4 was added in 493c3979a4def978a1137cf8543bf0de50d2615e, but then removed in a24bd8936f57a590f810e14d7828cf1bddce580e because an ARM32 compiler was needed to build ATF, and this was not supported back then.

Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced.

Following new changes are introduced in comparision with the older changeset:
- readme updated
- GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.04
- bump linux to 5.4.46

Quoted 2 lines

---

#9 lore raw

PATCH 3/4 configs/nanopi_m4: new defconfig

Quoted 21 lines · Jagan Teki
Quoted 20 lines · On Sun, Jun 14, 2020 at 12:02 AM <[email protected]> wrote:

From: Suniel Mahesh <[email protected]>

A defconfig for the friendlyarm nanopi-m4 was added in 493c3979a4def978a1137cf8543bf0de50d2615e, but then removed in a24bd8936f57a590f810e14d7828cf1bddce580e because an ARM32 compiler was needed to build ATF, and this was not supported back then.

Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced.

Following new changes are introduced in comparision with the older changeset:
- readme updated
- GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.04
- bump linux to 5.4.46

Quoted 5 lines
Quoted 2 lines

---

Hi Thomas and all,

May I know the reason why this patch is not getting picked up. Please let me know,
If something is not making sense. I can rework on them.

Regards
Suniel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200705/7c95bd6e/attachment.html>

#10 lore raw

PATCH 4/4 configs/nanopc_t4: new defconfig

In reply to sunil at amarulasolutions.com

From: Suniel Mahesh <[email protected]>

A defconfig for the friendlyarm nanopc-t4 was added in c23895f06e0988319a1959764a402b57bc21ffaf, but then removed in 8efd4463f78fd68c85b45cc0da347dfb805abb7e because an ARM32 compiler was needed to build ATF, and this was not supported back then.

Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced.

Following new changes are introduced in comparision with the older changeset:

- updated readme
- GPT partition layout is being used
- update defconfig to build ATF
- bump u-boot to 2020.04
- bump linux to 5.4.46

---
NOTE:
- new patch

---
 .gitlab-ci.yml                            |  1 +
 DEVELOPERS                                |  2 ++
 board/friendlyarm/nanopc-t4/extlinux.conf |  4 +++
 board/friendlyarm/nanopc-t4/genimage.cfg  | 39 +++++++++++++++++++++
 board/friendlyarm/nanopc-t4/post-build.sh |  5 +++
 board/friendlyarm/nanopc-t4/readme.txt    | 45 +++++++++++++++++++++++++
 configs/nanopc_t4_defconfig               | 56 +++++++++++++++++++++++++++++++
 7 files changed, 152 insertions(+)
 create mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf
 create mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg
 create mode 100755 board/friendlyarm/nanopc-t4/post-build.sh
 create mode 100644 board/friendlyarm/nanopc-t4/readme.txt
 create mode 100644 configs/nanopc_t4_defconfig
.gitlab-ci.yml +1 -0
index 4ff0b4b..a3b268d 100644
@@ -225,6 +225,7 @@ mx53loco_defconfig: { extends: .defconfig }
 mx6cubox_defconfig: { extends: .defconfig }
 mx6sx_udoo_neo_defconfig: { extends: .defconfig }
 mx6udoo_defconfig: { extends: .defconfig }
+nanopc_t4_defconfig: { extends: .defconfig }
 nanopi_m1_defconfig: { extends: .defconfig }
 nanopi_m1_plus_defconfig: { extends: .defconfig }
 nanopi_m4_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
index 220bb34..4a1cab4 100644
@@ -2392,9 +2392,11 @@ F:	package/powertop/
 
 N:	Suniel Mahesh <[email protected]>
 F:	board/firefly/
+F:	board/friendlyarm/nanopc-t4
 F:	board/friendlyarm/nanopi-m4
 F:	board/orangepi/orangepi-rk3399
 F:	board/pine64/rockpro64
+F: 	configs/nanopc_t4_defconfig
 F: 	configs/nanopi_m4_defconfig
 F:	configs/orangepi_rk3399_defconfig
 F:	configs/roc_pc_rk3399_defconfig
board/friendlyarm/nanopc-t4/extlinux.conf new file +4 -0
new file mode 100644
index 0000000..31c6b30
@@ -0,0 +1,4 @@
+label RK3399_NanoPC_T4 linux
+  kernel /Image
+  devicetree /rk3399-nanopc-t4.dtb
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rootwait
board/friendlyarm/nanopc-t4/genimage.cfg new file +39 -0
new file mode 100644
index 0000000..7508c7d
@@ -0,0 +1,39 @@
+image boot.vfat {
+        vfat {
+                files = {
+                        "Image",
+                        "rk3399-nanopc-t4.dtb",
+                        "extlinux"
+                }
+        }
+        size = 112M
+}
+
+image sdcard.img {
+
+        hdimage {
+                gpt = true
+        }
+
+        partition loader1 {
+                image = "idbloader.img"
+                offset = 32K
+        }
+
+        partition loader2 {
+                image = "u-boot.itb"
+                offset = 8M
+        }
+
+        partition boot {
+                partition-type = 0xC
+                bootable = "true"
+                image = "boot.vfat"
+                offset = 16M
+        }
+
+        partition rootfs {
+                partition-type = 0x83
+                image = "rootfs.ext4"
+        }
+}
board/friendlyarm/nanopc-t4/post-build.sh new file +5 -0
new file mode 100755
index 0000000..ba29375
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/friendlyarm/nanopc-t4/readme.txt new file +45 -0

45 lines not on this page · raw message

configs/nanopc_t4_defconfig new file +56 -0

56 lines not on this page · raw message

Signature · 1 line
2.7.4
#11 lore raw

PATCH 4/4 configs/nanopc_t4: new defconfig

Quoted 15 lines · On Sun, Jun 14, 2020 at 12:03 AM <[email protected]> wrote:

From: Suniel Mahesh <[email protected]>

A defconfig for the friendlyarm nanopc-t4 was added in c23895f06e0988319a1959764a402b57bc21ffaf, but then removed in 8efd4463f78fd68c85b45cc0da347dfb805abb7e because an ARM32 compiler was needed to build ATF, and this was not supported back then.

Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced.

Following new changes are introduced in comparision with the older changeset:

Quoted 8 lines

- updated readme
- GPT partition layout is being used
- update defconfig to build ATF
- bump u-boot to 2020.04
- bump linux to 5.4.46

---

#12 lore raw

PATCH 4/4 configs/nanopc_t4: new defconfig

Quoted 22 lines · Jagan Teki
Quoted 21 lines · On Sun, Jun 14, 2020 at 12:03 AM <[email protected]> wrote:

From: Suniel Mahesh <[email protected]>

A defconfig for the friendlyarm nanopc-t4 was added in c23895f06e0988319a1959764a402b57bc21ffaf, but then removed in 8efd4463f78fd68c85b45cc0da347dfb805abb7e because an ARM32 compiler was needed to build ATF, and this was not supported back then.

Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced.

Following new changes are introduced in comparision with the older changeset:

- updated readme
- GPT partition layout is being used
- update defconfig to build ATF
- bump u-boot to 2020.04
- bump linux to 5.4.46

Quoted 5 lines
Quoted 2 lines

---

Hi Thomas and all,

May I know the reason why this patch is not getting picked up. Please let me know,
If something is not making sense. I can rework on them.

Regards
Suniel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200705/a0808eb2/attachment.html>