arm64: dts: meson: add support for WeTek Core 2
Subsystems (2)
v3 cover arm64: dts: meson: add support for WeTek Core 2
From: chewitt <[email protected]>
This series adds support for the WeTek Core 2 which is a commercial box device based on the Amlogic Q200 reference design.
v3 changes - fix BT node (enable-gpios > shutdown-gpios) v2 changes - simplify ethernet disable
Christian Hewitt (2):
dt-bindings: arm: amlogic: add support for the WeTek Core 2
arm64: dts: meson: add support for the WeTek Core 2
.../devicetree/bindings/arm/amlogic.yaml | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../dts/amlogic/meson-gxm-wetek-core2.dts | 87 +++++++++++++++++++ 3 files changed, 89 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
Signature · 1 line
2.17.1
PATCH v3 1/2 dt-bindings: arm: amlogic: add support for the WeTek Core 2
The WeTek Core 2 is a commercial Android device based on the Amlogic Q200 reference design using the S912-H chipset. Specs:
3GB DDR3 RAM
32GB eMMC storage
10/100 Ethernet using Realtek RTL8152 (internal USB) 802.11 a/b/g/n/ac + BT 4.1 sdio wireless module (AP6356S) 2x single colour LEDs to indicate power
1x power button
1x reset button on the underside of the box
HDMI 2.0 (4k@60p) video
Composite video + 2-channel audio output on 3.5mm jack S/PDIF audio output
2x USB 2.0 ports
1x USB OTG port (internal)
1x micro SD card slot
UART pins (internal)
IR Sensor
--- Documentation/devicetree/bindings/arm/amlogic.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/amlogic.yaml +1 -0
@@ -121,6 +121,7 @@ properties: - libretech,aml-s912-pc - nexbox,a1 - tronsmart,vega-s96 + - wetek,core2 - const: amlogic,s912 - const: amlogic,meson-gxm
Signature · 1 line
2.17.1
PATCH v3 2/2 arm64: dts: meson: add support for the WeTek Core 2
In reply to Christian HewittThe WeTek Core2 is a commercial device based on the Amlogic Q200 reference design but with the following differences:
- 3GB RAM, 32GB eMMC
- Blue and Red LEDs used to signal on/off status
- uart_AO can be accessed after opening the case; soldering required
- USB OTG is not accessible (inside the case)
- Realtek RTL8152 Ethernet (internal USB connection)
--- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../dts/amlogic/meson-gxm-wetek-core2.dts | 87 +++++++++++++++++++ 2 files changed, 88 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
arch/arm64/boot/dts/amlogic/Makefile +1 -0
@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts new file +87 -0
87 lines not on this page · raw message
Signature · 1 line
2.17.1
Re: [PATCH v3 2/2] arm64: dts: meson: add support for the WeTek Core 2
Quoted 112 lines · Christian Hewitt
The WeTek Core2 is a commercial device based on the Amlogic Q200 reference design but with the following differences:
- 3GB RAM, 32GB eMMC
- Blue and Red LEDs used to signal on/off status
-uart_AOcan be accessed after opening the case; soldering required
- USB OTG is not accessible (inside the case)
- Realtek RTL8152 Ethernet (internal USB connection)Signed-off-by Christian Hewitt <[email protected]>--- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../dts/amlogic/meson-gxm-wetek-core2.dts | 87 +++++++++++++++++++ 2 files changed, 88 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtsarch/arm64/boot/dts/amlogic/Makefile +1
-0@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtbarch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts new file +77
-0@@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Christian Hewitt <[email protected]> + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm"; + model = "WeTek Core 2"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */ + }; + + leds { + compatible = "gpio-leds"; + + blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-update { + label = "update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button-power { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* Disabled as Realtek RTL8152 USB provides Ethernet */ +ðmac { + status = "disabled"; +}; + +&internal_phy { + status = "disabled"; +}; + +&ir { + linux,rc-map-name = "rc-wetek-play2"; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default";
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts line 87
Quoted 10 lines
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts new file +10
-0+ uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +};
Quoted 11 lines · Christian Hewitt
This series adds support for the WeTek Core 2 which is a commercial box device based on the Amlogic Q200 reference design.
v3 changes - fix BT node (enable-gpios > shutdown-gpios) v2 changes - simplify ethernet disable
Christian Hewitt (2):
dt-bindings: arm: amlogic: add support for the WeTek Core 2
arm64: dts: meson: add support for the WeTek Core 2[...]
Applied, thanks!
[1/2] dt-bindings: arm: amlogic: add support for the WeTek Core 2
commit: 8b6f53d7b94b8d23860ae44a56b0af404a6c7e4c
[2/2] arm64: dts: meson: add support for the WeTek Core 2
commit: ea232b9ccccf2f55fe231441f3908c31c7136c4fBest regards,
Signature · 1 line
Kevin Hilman <[email protected]>
This series was applied to khilman/linux-amlogic.git (refs/heads/for-next).
Hello:
This series was applied to khilman/linux-amlogic.git (refs/heads/for-next).
Quoted 9 lines · On Sun, 19 Jul 2020 02:14:19 +0000 you wrote:
From: chewitt <[email protected]>
This series adds support for the WeTek Core 2 which is a commercial box device based on the Amlogic Q200 reference design.
v3 changes - fix BT node (enable-gpios > shutdown-gpios) v2 changes - simplify ethernet disable
[...]
Here is a summary with links:
- [v3,1/2] dt-bindings: arm: amlogic: add support for the WeTek Core 2
https://git.kernel.org/khilman/linux-amlogic/c/8b6f53d7b94b8d23860ae44a56b0af404a6c7e4c - [v3,2/2] arm64: dts: meson: add support for the WeTek Core 2 https://git.kernel.org/khilman/linux-amlogic/c/ea232b9ccccf2f55fe231441f3908c31c7136c4f
You are awesome, thank you!
Signature · 7 lines
Deet-doot-dot, I am a bot. https://korg.wiki.kernel.org/userdoc/pwbot _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic