Skip to contentSkip to conversation

tools/perf: Add extended regs support for powerpc

PATCH Applied Athira Rajeev 2 participants 4 messages Aug 7, 2020 perf events

lore
Share & tools
lore
#0 lore raw

v6 cover tools/perf: Add extended regs support for powerpc

Patch set to add perf tools support for perf extended register capability in powerpc.

Patch 1/2 adds extended regs for power9 ( mmcr0, mmcr1 and mmcr2 ) to sample_reg_mask in the tool side to use with -I?. Patch 2/2 adds extended regs for power10 ( mmcr3, sier2, sier3) to sample_reg_mask in the tool side.

Ravi bangoria found an issue with perf record -I while testing the changes. The same issue is currently being worked on here:
https://lkml.org/lkml/2020/7/19/413 and will be resolved once fix from Jin Yao is merged.

This includes the perf tools side changes to support extended regs. kernel side changes are sent as separate patchset.

Changelog:
Changes from v5 -> v6
- Split perf tools side changes to one patchset as suggested by Arnaldo
Link to previous series:
https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=192624

Changes from v4 -> v5
- initialize perf_reg_extended_max to work on
all platforms as suggested by Ravi Bangoria
- Added Reviewed-and-Tested-by from Ravi Bangoria

Changes from v3 -> v4
- Split the series and send extended regs as separate patch set here. Link to previous series :
https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=190462&state=*
Other PMU patches are already merged in powerpc/next.

- Fixed kernel build issue when using config having
CONFIG_PERF_EVENTS set and without CONFIG_PPC_PERF_CTRS
reported by kernel build bot.
- Included Reviewed-by from Kajol Jain.
- Addressed review comments from Ravi Bangoria to initialize perf_reg_extended_max and define it in lowercase since it is local variable.

Anju T Sudhakar (1):
tools/perf: Add perf tools support for extended register capability in
powerpc

Athira Rajeev (1):
tools/perf: Add perf tools support for extended regs in power10

 tools/arch/powerpc/include/uapi/asm/perf_regs.h | 20 ++++++++-
 tools/perf/arch/powerpc/include/perf_regs.h     |  8 +++-
 tools/perf/arch/powerpc/util/header.c           |  9 +---
 tools/perf/arch/powerpc/util/perf_regs.c        | 55 +++++++++++++++++++++++++
 tools/perf/arch/powerpc/util/utils_header.h     | 15 +++++++
 5 files changed, 97 insertions(+), 10 deletions(-)
 create mode 100644 tools/perf/arch/powerpc/util/utils_header.h
Signature · 1 line
1.8.3.1
#1 lore raw

PATCH v6 1/2 tools/perf: Add perf tools support for extended register capability in powerpc

From: Anju T Sudhakar <[email protected]>

Add extended regs to sample_reg_mask in the tool side to use with -I? option. Perf tools side uses extended mask to display the platform supported register names (with -I? option) to the user and also send this mask to the kernel to capture the extended registers in each sample. Hence decide the mask value based on the processor version.

Currently definitions for mfspr, SPRN_PVR are part of arch/powerpc/util/header.c. Move this to a header file so that these definitions can be re-used in other source files as well.

[Decide extended mask at run time based on platform]
Reviewed-and-tested-by Ravi Bangoria <[email protected]>
---
 tools/arch/powerpc/include/uapi/asm/perf_regs.h | 14 ++++++-
 tools/perf/arch/powerpc/include/perf_regs.h     |  5 ++-
 tools/perf/arch/powerpc/util/header.c           |  9 +----
 tools/perf/arch/powerpc/util/perf_regs.c        | 49 +++++++++++++++++++++++++
 tools/perf/arch/powerpc/util/utils_header.h     | 15 ++++++++
 5 files changed, 82 insertions(+), 10 deletions(-)
 create mode 100644 tools/perf/arch/powerpc/util/utils_header.h
tools/arch/powerpc/include/uapi/asm/perf_regs.h +13 -1
index f599064..225c64c 100644
@@ -48,6 +48,18 @@ enum perf_event_powerpc_regs {
 	PERF_REG_POWERPC_DSISR,
 	PERF_REG_POWERPC_SIER,
 	PERF_REG_POWERPC_MMCRA,
-	PERF_REG_POWERPC_MAX,
+	/* Extended registers */
+	PERF_REG_POWERPC_MMCR0,
+	PERF_REG_POWERPC_MMCR1,
+	PERF_REG_POWERPC_MMCR2,
+	/* Max regs without the extended regs */
+	PERF_REG_POWERPC_MAX = PERF_REG_POWERPC_MMCRA + 1,
 };
+
+#define PERF_REG_PMU_MASK	((1ULL << PERF_REG_POWERPC_MAX) - 1)
+
+/* PERF_REG_EXTENDED_MASK value for CPU_FTR_ARCH_300 */
+#define PERF_REG_PMU_MASK_300   (((1ULL << (PERF_REG_POWERPC_MMCR2 + 1)) - 1) - PERF_REG_PMU_MASK)
+
+#define PERF_REG_MAX_ISA_300   (PERF_REG_POWERPC_MMCR2 + 1)
 #endif /* _UAPI_ASM_POWERPC_PERF_REGS_H */
tools/perf/arch/powerpc/include/perf_regs.h +4 -1
index e18a355..46ed00d 100644
@@ -64,7 +64,10 @@
 	[PERF_REG_POWERPC_DAR] = "dar",
 	[PERF_REG_POWERPC_DSISR] = "dsisr",
 	[PERF_REG_POWERPC_SIER] = "sier",
-	[PERF_REG_POWERPC_MMCRA] = "mmcra"
+	[PERF_REG_POWERPC_MMCRA] = "mmcra",
+	[PERF_REG_POWERPC_MMCR0] = "mmcr0",
+	[PERF_REG_POWERPC_MMCR1] = "mmcr1",
+	[PERF_REG_POWERPC_MMCR2] = "mmcr2",
 };
 
 static inline const char *perf_reg_name(int id)
tools/perf/arch/powerpc/util/header.c +1 -8
index d487007..1a95017 100644
@@ -7,17 +7,10 @@
 #include <string.h>
 #include <linux/stringify.h>
 #include "header.h"
+#include "utils_header.h"
 #include "metricgroup.h"
 #include <api/fs/fs.h>
 
-#define mfspr(rn)       ({unsigned long rval; \
-			 asm volatile("mfspr %0," __stringify(rn) \
-				      : "=r" (rval)); rval; })
-
-#define SPRN_PVR        0x11F	/* Processor Version Register */
-#define PVR_VER(pvr)    (((pvr) >>  16) & 0xFFFF) /* Version field */
-#define PVR_REV(pvr)    (((pvr) >>   0) & 0xFFFF) /* Revison field */
-
 int
 get_cpuid(char *buffer, size_t sz)
 {
tools/perf/arch/powerpc/util/perf_regs.c +49 -0

67 lines not on this page · raw message

tools/perf/arch/powerpc/util/utils_header.h new file +15 -0
new file mode 100644
index 0000000..5788eb1
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PERF_UTIL_HEADER_H
+#define __PERF_UTIL_HEADER_H
+
+#include <linux/stringify.h>
+
+#define mfspr(rn)       ({unsigned long rval; \
+			asm volatile("mfspr %0," __stringify(rn) \
+				: "=r" (rval)); rval; })
+
+#define SPRN_PVR        0x11F   /* Processor Version Register */
+#define PVR_VER(pvr)    (((pvr) >>  16) & 0xFFFF) /* Version field */
+#define PVR_REV(pvr)    (((pvr) >>   0) & 0xFFFF) /* Revison field */
+
+#endif /* __PERF_UTIL_HEADER_H */
Signature · 1 line
1.8.3.1
#2 lore raw

PATCH v6 2/2 tools/perf: Add perf tools support for extended regs in power10

In reply to Athira Rajeev

Added support for supported regs which are new in power10 ( MMCR3, SIER2, SIER3 ) to sample_reg_mask in the tool side to use with -I? option. Also added PVR check to send extended mask for power10 at kernel while capturing extended regs in each sample.

---
 tools/arch/powerpc/include/uapi/asm/perf_regs.h | 6 ++++++
 tools/perf/arch/powerpc/include/perf_regs.h     | 3 +++
 tools/perf/arch/powerpc/util/perf_regs.c        | 6 ++++++
 3 files changed, 15 insertions(+)
tools/arch/powerpc/include/uapi/asm/perf_regs.h +6 -0
index 225c64c..bdf5f10 100644
@@ -52,6 +52,9 @@ enum perf_event_powerpc_regs {
 	PERF_REG_POWERPC_MMCR0,
 	PERF_REG_POWERPC_MMCR1,
 	PERF_REG_POWERPC_MMCR2,
+	PERF_REG_POWERPC_MMCR3,
+	PERF_REG_POWERPC_SIER2,
+	PERF_REG_POWERPC_SIER3,
 	/* Max regs without the extended regs */
 	PERF_REG_POWERPC_MAX = PERF_REG_POWERPC_MMCRA + 1,
 };
@@ -60,6 +63,9 @@ enum perf_event_powerpc_regs {
 
 /* PERF_REG_EXTENDED_MASK value for CPU_FTR_ARCH_300 */
 #define PERF_REG_PMU_MASK_300   (((1ULL << (PERF_REG_POWERPC_MMCR2 + 1)) - 1) - PERF_REG_PMU_MASK)
+/* PERF_REG_EXTENDED_MASK value for CPU_FTR_ARCH_31 */
+#define PERF_REG_PMU_MASK_31   (((1ULL << (PERF_REG_POWERPC_SIER3 + 1)) - 1) - PERF_REG_PMU_MASK)
 
 #define PERF_REG_MAX_ISA_300   (PERF_REG_POWERPC_MMCR2 + 1)
+#define PERF_REG_MAX_ISA_31    (PERF_REG_POWERPC_SIER3 + 1)
 #endif /* _UAPI_ASM_POWERPC_PERF_REGS_H */
tools/perf/arch/powerpc/include/perf_regs.h +3 -0
index 46ed00d..63f3ac9 100644
@@ -68,6 +68,9 @@
 	[PERF_REG_POWERPC_MMCR0] = "mmcr0",
 	[PERF_REG_POWERPC_MMCR1] = "mmcr1",
 	[PERF_REG_POWERPC_MMCR2] = "mmcr2",
+	[PERF_REG_POWERPC_MMCR3] = "mmcr3",
+	[PERF_REG_POWERPC_SIER2] = "sier2",
+	[PERF_REG_POWERPC_SIER3] = "sier3",
 };
 
 static inline const char *perf_reg_name(int id)
tools/perf/arch/powerpc/util/perf_regs.c +6 -0
index d64ba0c..2b6d470 100644
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 
 #define PVR_POWER9		0x004E
+#define PVR_POWER10		0x0080
 
 const struct sample_reg sample_reg_masks[] = {
 	SMPL_REG(r0, PERF_REG_POWERPC_R0),
@@ -64,6 +65,9 @@
 	SMPL_REG(mmcr0, PERF_REG_POWERPC_MMCR0),
 	SMPL_REG(mmcr1, PERF_REG_POWERPC_MMCR1),
 	SMPL_REG(mmcr2, PERF_REG_POWERPC_MMCR2),
+	SMPL_REG(mmcr3, PERF_REG_POWERPC_MMCR3),
+	SMPL_REG(sier2, PERF_REG_POWERPC_SIER2),
+	SMPL_REG(sier3, PERF_REG_POWERPC_SIER3),
 	SMPL_REG_END
 };
 
@@ -194,6 +198,8 @@ uint64_t arch__intr_reg_mask(void)
 	version = (((mfspr(SPRN_PVR)) >>  16) & 0xFFFF);
 	if (version == PVR_POWER9)
 		extended_mask = PERF_REG_PMU_MASK_300;
+	else if (version == PVR_POWER10)
+		extended_mask = PERF_REG_PMU_MASK_31;
 	else
 		return mask;
 
Signature · 1 line
1.8.3.1
maintainer Applied
#3 lore raw
In reply to Athira Rajeev

Em Fri, Aug 07, 2020 at 06:11:17AM -0400, Athira Rajeev escreveu:

Quoted 8 lines

Patch set to add perf tools support for perf extended register capability in powerpc.

Patch 1/2 adds extended regs for power9 ( mmcr0, mmcr1 and mmcr2 ) to sample_reg_mask in the tool side to use with -I?. Patch 2/2 adds extended regs for power10 ( mmcr3, sier2, sier3) to sample_reg_mask in the tool side.

Quoted 7 lines

Ravi bangoria found an issue with perf record -I while testing the changes. The same issue is currently being worked on here:
https://lkml.org/lkml/2020/7/19/413 and will be resolved once fix from Jin Yao is merged.

This includes the perf tools side changes to support extended regs. kernel side changes are sent as separate patchset.

Thanks, applied.

- Arnaldo