Skip to contentSkip to conversation

dt-bindings: phy-imx8mq-usb: add compatible string for imx8mp usb phy

PATCH RESEND Superseded Li Jun 2 participants 3 messages Aug 21, 2020 – Aug 23, 2020

Subsystems (3)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Li Jun

author
#0 lore raw

PATCH RESEND 1/2 dt-bindings: phy-imx8mq-usb: add compatible string for imx8mp usb phy

Add "fsl,imx8mp-usb-phy" compatible string for imx8mp usb phy, which is similar with imx8mq usb phy but with some different customizations.

Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt +1 -1
index ed47e5c..7c70f2a 100644
@@ -1,7 +1,7 @@
 * Freescale i.MX8MQ USB3 PHY binding
 
 Required properties:
-- compatible:	Should be "fsl,imx8mq-usb-phy"
+- compatible:	Should be "fsl,imx8mq-usb-phy" or "fsl,imx8mp-usb-phy"
 - #phys-cells:	must be 0 (see phy-bindings.txt in this directory)
 - reg:		The base address and length of the registers
 - clocks:	phandles to the clocks for each clock listed in clock-names
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH RESEND 2/2 phy: freescale: imx8mq-usb: add support for imx8mp usb phy

Add initial support for imx8mp usb phy support, imx8mp usb has a silimar phy as imx8mq, which has some different customizations on clock and low power design when SoC integration.

drivers/phy/freescale/phy-fsl-imx8mq-usb.c +70 -7
index 0c4833d..030bf4e 100644
@@ -4,12 +4,16 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 #include <linux/regulator/consumer.h>
 
 #define PHY_CTRL0			0x0
 #define PHY_CTRL0_REF_SSP_EN		BIT(2)
+#define PHY_CTRL0_FSEL_MASK		GENMASK(10, 5)
+#define PHY_CTRL0_FSEL_24M		(0x2a << 5)
 
 #define PHY_CTRL1			0x4
 #define PHY_CTRL1_RESET			BIT(0)
@@ -20,6 +24,11 @@
 
 #define PHY_CTRL2			0x8
 #define PHY_CTRL2_TXENABLEN0		BIT(8)
+#define PHY_CTRL2_OTG_DISABLE		BIT(9)
+
+#define PHY_CTRL6			0x18
+#define PHY_CTRL6_ALT_CLK_EN		BIT(1)
+#define PHY_CTRL6_ALT_CLK_SEL		BIT(0)
 
 struct imx8mq_usb_phy {
 	struct phy *phy;
@@ -54,6 +63,44 @@ static int imx8mq_usb_phy_init(struct phy *phy)
 	return 0;
 }
 
+static int imx8mp_usb_phy_init(struct phy *phy)
+{
+	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+	u32 value;
+
+	/* USB3.0 PHY signal fsel for 24M ref */
+	value = readl(imx_phy->base + PHY_CTRL0);
+	value &= ~PHY_CTRL0_FSEL_MASK;
+	value |= PHY_CTRL0_FSEL_24M;
+	writel(value, imx_phy->base + PHY_CTRL0);
+
+	/* Disable alt_clk_en and use internal MPLL clocks */
+	value = readl(imx_phy->base + PHY_CTRL6);
+	value &= ~(PHY_CTRL6_ALT_CLK_SEL | PHY_CTRL6_ALT_CLK_EN);
+	writel(value, imx_phy->base + PHY_CTRL6);
+
+	value = readl(imx_phy->base + PHY_CTRL1);
+	value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0);
+	value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET;
+	writel(value, imx_phy->base + PHY_CTRL1);
+
+	value = readl(imx_phy->base + PHY_CTRL0);
+	value |= PHY_CTRL0_REF_SSP_EN;
+	writel(value, imx_phy->base + PHY_CTRL0);
+
+	value = readl(imx_phy->base + PHY_CTRL2);
+	value |= PHY_CTRL2_TXENABLEN0 | PHY_CTRL2_OTG_DISABLE;
+	writel(value, imx_phy->base + PHY_CTRL2);
+
+	udelay(10);
+
+	value = readl(imx_phy->base + PHY_CTRL1);
+	value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET);
+	writel(value, imx_phy->base + PHY_CTRL1);
+
+	return 0;
+}
+
 static int imx8mq_phy_power_on(struct phy *phy)
 {
 	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
@@ -83,12 +130,29 @@ static struct phy_ops imx8mq_usb_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static struct phy_ops imx8mp_usb_phy_ops = {
+	.init		= imx8mp_usb_phy_init,
+	.power_on	= imx8mq_phy_power_on,
+	.power_off	= imx8mq_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id imx8mq_usb_phy_of_match[] = {
+	{.compatible = "fsl,imx8mq-usb-phy",
+	 .data = &imx8mq_usb_phy_ops,},
+	{.compatible = "fsl,imx8mp-usb-phy",
+	 .data = &imx8mp_usb_phy_ops,},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
+
 static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
 	struct device *dev = &pdev->dev;
 	struct imx8mq_usb_phy *imx_phy;
 	struct resource *res;
+	const struct of_device_id *of_id;
 
 	imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL);
 	if (!imx_phy)
@@ -105,7 +169,12 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(imx_phy->base))
 		return PTR_ERR(imx_phy->base);
 
-	imx_phy->phy = devm_phy_create(dev, NULL, &imx8mq_usb_phy_ops);
+	of_id = of_match_device(imx8mq_usb_phy_of_match, dev);
+	if (!of_id)
+		return -ENODEV;
+
+	imx_phy->phy = devm_phy_create(dev, NULL, (const struct phy_ops *)
+					of_id->data);
 	if (IS_ERR(imx_phy->phy))
 		return PTR_ERR(imx_phy->phy);
 
@@ -120,12 +189,6 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
-static const struct of_device_id imx8mq_usb_phy_of_match[] = {
-	{.compatible = "fsl,imx8mq-usb-phy",},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
-
 static struct platform_driver imx8mq_usb_phy_driver = {
 	.probe	= imx8mq_usb_phy_probe,
 	.driver = {
Signature · 1 line
2.7.4
maintainer
#2 lore raw

Re: [RESEND PATCH 2/2] phy: freescale: imx8mq-usb: add support for imx8mp usb phy

Quoted 11 lines · Li Jun

Add initial support for imx8mp usb phy support, imx8mp usb has a silimar phy as imx8mq, which has some different customizations on clock and low power design when SoC integration.

drivers/phy/freescale/phy-fsl-imx8mq-usb.c +0 -0
index 0c4833d..030bf4e 100644

drivers/phy/freescale/phy-fsl-imx8mq-usb.c line 11

Quoted 8 lines
drivers/phy/freescale/phy-fsl-imx8mq-usb.c +2 -0
@@ -4,12 +4,16 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 #include <linux/regulator/consumer.h>

keep this sorted alphabetically please

drivers/phy/freescale/phy-fsl-imx8mq-usb.c line 16

Quoted 5 lines
drivers/phy/freescale/phy-fsl-imx8mq-usb.c +2 -0
 #define PHY_CTRL0			0x0
 #define PHY_CTRL0_REF_SSP_EN		BIT(2)
+#define PHY_CTRL0_FSEL_MASK		GENMASK(10, 5)
+#define PHY_CTRL0_FSEL_24M		(0x2a << 5)

use FIELD_{GET,PREP} for this?

Quoted 91 lines
drivers/phy/freescale/phy-fsl-imx8mq-usb.c +60 -0
 #define PHY_CTRL1			0x4
 #define PHY_CTRL1_RESET			BIT(0)
@@ -20,6 +24,11 @@
 
 #define PHY_CTRL2			0x8
 #define PHY_CTRL2_TXENABLEN0		BIT(8)
+#define PHY_CTRL2_OTG_DISABLE		BIT(9)
+
+#define PHY_CTRL6			0x18
+#define PHY_CTRL6_ALT_CLK_EN		BIT(1)
+#define PHY_CTRL6_ALT_CLK_SEL		BIT(0)
 
 struct imx8mq_usb_phy {
 	struct phy *phy;
@@ -54,6 +63,44 @@ static int imx8mq_usb_phy_init(struct phy *phy)
 	return 0;
 }
 
+static int imx8mp_usb_phy_init(struct phy *phy)
+{
+	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+	u32 value;
+
+	/* USB3.0 PHY signal fsel for 24M ref */
+	value = readl(imx_phy->base + PHY_CTRL0);
+	value &= ~PHY_CTRL0_FSEL_MASK;
+	value |= PHY_CTRL0_FSEL_24M;
+	writel(value, imx_phy->base + PHY_CTRL0);
+
+	/* Disable alt_clk_en and use internal MPLL clocks */
+	value = readl(imx_phy->base + PHY_CTRL6);
+	value &= ~(PHY_CTRL6_ALT_CLK_SEL | PHY_CTRL6_ALT_CLK_EN);
+	writel(value, imx_phy->base + PHY_CTRL6);
+
+	value = readl(imx_phy->base + PHY_CTRL1);
+	value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0);
+	value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET;
+	writel(value, imx_phy->base + PHY_CTRL1);
+
+	value = readl(imx_phy->base + PHY_CTRL0);
+	value |= PHY_CTRL0_REF_SSP_EN;
+	writel(value, imx_phy->base + PHY_CTRL0);
+
+	value = readl(imx_phy->base + PHY_CTRL2);
+	value |= PHY_CTRL2_TXENABLEN0 | PHY_CTRL2_OTG_DISABLE;
+	writel(value, imx_phy->base + PHY_CTRL2);
+
+	udelay(10);
+
+	value = readl(imx_phy->base + PHY_CTRL1);
+	value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET);
+	writel(value, imx_phy->base + PHY_CTRL1);
+
+	return 0;
+}
+
 static int imx8mq_phy_power_on(struct phy *phy)
 {
 	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
@@ -83,12 +130,29 @@ static struct phy_ops imx8mq_usb_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static struct phy_ops imx8mp_usb_phy_ops = {
+	.init		= imx8mp_usb_phy_init,
+	.power_on	= imx8mq_phy_power_on,
+	.power_off	= imx8mq_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id imx8mq_usb_phy_of_match[] = {
+	{.compatible = "fsl,imx8mq-usb-phy",
+	 .data = &imx8mq_usb_phy_ops,},
+	{.compatible = "fsl,imx8mp-usb-phy",
+	 .data = &imx8mp_usb_phy_ops,},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
+
 static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
 	struct device *dev = &pdev->dev;
 	struct imx8mq_usb_phy *imx_phy;
 	struct resource *res;
+	const struct of_device_id *of_id;
 
 	imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL);
 	if (!imx_phy)

drivers/phy/freescale/phy-fsl-imx8mq-usb.c static int imx8mq_usb_phy_probe(struct platform_device *pdev) · line 172

Quoted 5 lines
drivers/phy/freescale/phy-fsl-imx8mq-usb.c +1 -1
@@ -105,7 +169,12 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(imx_phy->base))
 		return PTR_ERR(imx_phy->base);
 
-	imx_phy->phy = devm_phy_create(dev, NULL, &imx8mq_usb_phy_ops);
+	of_id = of_match_device(imx8mq_usb_phy_of_match, dev);

You need of_id->data so why not get that using
of_device_get_match_data()

Quoted 23 lines
drivers/phy/freescale/phy-fsl-imx8mq-usb.c +5 -6
+	if (!of_id)
+		return -ENODEV;
+
+	imx_phy->phy = devm_phy_create(dev, NULL, (const struct phy_ops *)
+					of_id->data);
 	if (IS_ERR(imx_phy->phy))
 		return PTR_ERR(imx_phy->phy);
 
@@ -120,12 +189,6 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
-static const struct of_device_id imx8mq_usb_phy_of_match[] = {
-	{.compatible = "fsl,imx8mq-usb-phy",},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
-
 static struct platform_driver imx8mq_usb_phy_driver = {
 	.probe	= imx8mq_usb_phy_probe,
 	.driver = {
Signature · 1 line
2.7.4
Signature · 1 line
~Vinod