dt-bindings: phy-imx8mq-usb: add compatible string for imx8mp usb phy
Subsystems (3)
PATCH v3 1/2 dt-bindings: phy-imx8mq-usb: add compatible string for imx8mp usb phy
Add "fsl,imx8mp-usb-phy" compatible string for imx8mp usb phy, which is similar with imx8mq usb phy but with some different customizations.
---
no changes since v1.
Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt +1 -1
@@ -1,7 +1,7 @@ * Freescale i.MX8MQ USB3 PHY binding Required properties: -- compatible: Should be "fsl,imx8mq-usb-phy" +- compatible: Should be "fsl,imx8mq-usb-phy" or "fsl,imx8mp-usb-phy" - #phys-cells: must be 0 (see phy-bindings.txt in this directory) - reg: The base address and length of the registers - clocks: phandles to the clocks for each clock listed in clock-names
Signature · 1 line
2.7.4
PATCH v3 2/2 phy: freescale: imx8mq-usb: add support for imx8mp usb phy
Add initial support for imx8mp usb phy support, imx8mp usb has a silimar phy as imx8mq, which has some different customizations on clock and low power design when SoC integration.
---
Change for v3:
- Add missing bit field head file: linux/bitfield.h
Changes for v2:
- Add header files in alphabetical order.
- Use FIELD_PREP to get the target value to set.
- Use of_device_get_match_data() to get match data for phy ops.
drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 77 +++++++++++++++++++++++++++--- 1 file changed, 70 insertions(+), 7 deletions(-)
drivers/phy/freescale/phy-fsl-imx8mq-usb.c +70 -7
@@ -1,15 +1,20 @@// SPDX-License-Identifier: GPL-2.0+ /* Copyright (c) 2017 NXP. */ +#include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/delay.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/of_platform.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> #define PHY_CTRL0 0x0#define PHY_CTRL0_REF_SSP_EN BIT(2) +#define PHY_CTRL0_FSEL_MASK GENMASK(10, 5) +#define PHY_CTRL0_FSEL_24M 0x2a#define PHY_CTRL1 0x4#define PHY_CTRL1_RESET BIT(0)
@@ -20,6 +25,11 @@#define PHY_CTRL2 0x8#define PHY_CTRL2_TXENABLEN0 BIT(8) +#define PHY_CTRL2_OTG_DISABLE BIT(9) + +#define PHY_CTRL6 0x18 +#define PHY_CTRL6_ALT_CLK_EN BIT(1) +#define PHY_CTRL6_ALT_CLK_SEL BIT(0)struct imx8mq_usb_phy {struct phy *phy;
@@ -54,6 +64,44 @@ static int imx8mq_usb_phy_init(struct phy *phy)return 0 ; } +static int imx8mp_usb_phy_init (struct phy *phy) +{ +struct imx8mq_usb_phy *imx_phy =phy_get_drvdata (phy); +u32 value; + +/* USB3.0 PHY signal fsel for 24M ref */ + value =readl (imx_phy->base +PHY_CTRL0 ); + value &= ~PHY_CTRL0_FSEL_MASK ; + value |=FIELD_PREP (PHY_CTRL0_FSEL_MASK ,PHY_CTRL0_FSEL_24M ); +writel (value, imx_phy->base +PHY_CTRL0 ); + +/* Disable alt_clk_en and use internal MPLL clocks */ + value =readl (imx_phy->base +PHY_CTRL6 ); + value &= ~(PHY_CTRL6_ALT_CLK_SEL |PHY_CTRL6_ALT_CLK_EN ); +writel (value, imx_phy->base +PHY_CTRL6 ); + + value =readl (imx_phy->base +PHY_CTRL1 ); + value &= ~(PHY_CTRL1_VDATSRCENB0 |PHY_CTRL1_VDATDETENB0 ); + value |=PHY_CTRL1_RESET |PHY_CTRL1_ATERESET ; +writel (value, imx_phy->base +PHY_CTRL1 ); + + value =readl (imx_phy->base +PHY_CTRL0 ); + value |=PHY_CTRL0_REF_SSP_EN ; +writel (value, imx_phy->base +PHY_CTRL0 ); + + value =readl (imx_phy->base +PHY_CTRL2 ); + value |=PHY_CTRL2_TXENABLEN0 |PHY_CTRL2_OTG_DISABLE ; +writel (value, imx_phy->base +PHY_CTRL2 ); + +udelay (10 ); + + value =readl (imx_phy->base +PHY_CTRL1 ); + value &= ~(PHY_CTRL1_RESET |PHY_CTRL1_ATERESET ); +writel (value, imx_phy->base +PHY_CTRL1 ); + +return 0 ; +} +static int imx8mq_phy_power_on (struct phy *phy) {struct imx8mq_usb_phy *imx_phy =phy_get_drvdata (phy);
@@ -83,12 +131,29 @@ static struct phy_ops imx8mq_usb_phy_ops = { .owner = THIS_MODULE, }; +static struct phy_ops imx8mp_usb_phy_ops = { + .init = imx8mp_usb_phy_init, + .power_on = imx8mq_phy_power_on, + .power_off = imx8mq_phy_power_off, + .owner =THIS_MODULE , +}; + +static const struct of_device_id imx8mq_usb_phy_of_match[] = { + {.compatible ="fsl,imx8mq-usb-phy" , + .data = &imx8mq_usb_phy_ops,}, + {.compatible ="fsl,imx8mp-usb-phy" , + .data = &imx8mp_usb_phy_ops,}, + { } +}; +MODULE_DEVICE_TABLE (of, imx8mq_usb_phy_of_match); +static int imx8mq_usb_phy_probe (struct platform_device *pdev) {struct phy_provider *phy_provider;struct device *dev = &pdev->dev;struct imx8mq_usb_phy *imx_phy;struct resource *res; +const struct phy_ops *phy_ops; imx_phy =devm_kzalloc (dev,sizeof (*imx_phy),GFP_KERNEL );if (!imx_phy)
@@ -105,7 +170,11 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)if (IS_ERR (imx_phy->base))return PTR_ERR (imx_phy->base); - imx_phy->phy =devm_phy_create (dev,NULL , &imx8mq_usb_phy_ops); + phy_ops =of_device_get_match_data (dev); +if (!phy_ops) +return -EINVAL ; + + imx_phy->phy =devm_phy_create (dev,NULL , phy_ops);if (IS_ERR (imx_phy->phy))return PTR_ERR (imx_phy->phy);
@@ -120,12 +189,6 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)return PTR_ERR_OR_ZERO (phy_provider); } -static const struct of_device_id imx8mq_usb_phy_of_match[] = { - {.compatible ="fsl,imx8mq-usb-phy" ,}, - { }, -}; -MODULE_DEVICE_TABLE (of, imx8mq_usb_phy_of_match); -static struct platform_driver imx8mq_usb_phy_driver = { .probe = imx8mq_usb_phy_probe, .driver = {
Signature · 1 line
2.7.4
Quoted 2 lines · Li Jun
Add "fsl,imx8mp-usb-phy" compatible string for imx8mp usb phy, which is similar with imx8mq usb phy but with some different customizations.
Applied both, thanks
Signature · 1 line
~Vinod