Skip to contentSkip to conversation

usb: add MediaTek USB3 DRD driver

PATCH Superseded Chunfeng Yun 2 participants 4 messages Oct 16, 2020 – Oct 19, 2020

Subsystems (3)
lore
Share & tools
lore

Chunfeng Yun

author maintainer
#0 lore raw

PATCH v10 1/1 usb: add MediaTek USB3 DRD driver

This patch adds support for the MediaTek USB3 DRD controller, its host side is based on xHCI, this driver supports device mode and host mode.

---
v10: no changes, but rebase on u-boot-usb/next

v9:
1. replace tab by space for macro in mtu3.h suggested by Marek
2. add Acked-by Bin

v8: Simplify Kconfig suggested by Bin

v7: use xhci quirk flag XHCI_MTK_HOST

v6: no changes

v5: change condition of readl_poll_timeout() when check clocks

v4:
1. remove unused member @busy and @wedged, use their flags instead
2. support force_vbus mode
3. add a glue driver using UCLASS_NOP
4. add host driver, and rebuild host flow

v3 changes
1. add ->udc_set_speed()
2. simplify some code flow

v2: simplify QMU operations

---
 Makefile                           |   1 +
 drivers/usb/Kconfig                |   2 +
 drivers/usb/mtu3/Kconfig           |  44 ++
 drivers/usb/mtu3/Makefile          |  11 +
 drivers/usb/mtu3/mtu3.h            | 423 +++++++++++++
 drivers/usb/mtu3/mtu3_core.c       | 838 ++++++++++++++++++++++++++
 drivers/usb/mtu3/mtu3_dr.h         |  52 ++
 drivers/usb/mtu3/mtu3_gadget.c     | 686 +++++++++++++++++++++
 drivers/usb/mtu3/mtu3_gadget_ep0.c | 933 +++++++++++++++++++++++++++++
 drivers/usb/mtu3/mtu3_host.c       | 141 +++++
 drivers/usb/mtu3/mtu3_hw_regs.h    | 515 ++++++++++++++++
 drivers/usb/mtu3/mtu3_plat.c       | 368 ++++++++++++
 drivers/usb/mtu3/mtu3_qmu.c        | 504 ++++++++++++++++
 drivers/usb/mtu3/mtu3_qmu.h        |  37 ++
 14 files changed, 4555 insertions(+)
 create mode 100644 drivers/usb/mtu3/Kconfig
 create mode 100644 drivers/usb/mtu3/Makefile
 create mode 100644 drivers/usb/mtu3/mtu3.h
 create mode 100644 drivers/usb/mtu3/mtu3_core.c
 create mode 100644 drivers/usb/mtu3/mtu3_dr.h
 create mode 100644 drivers/usb/mtu3/mtu3_gadget.c
 create mode 100644 drivers/usb/mtu3/mtu3_gadget_ep0.c
 create mode 100644 drivers/usb/mtu3/mtu3_host.c
 create mode 100644 drivers/usb/mtu3/mtu3_hw_regs.h
 create mode 100644 drivers/usb/mtu3/mtu3_plat.c
 create mode 100644 drivers/usb/mtu3/mtu3_qmu.c
 create mode 100644 drivers/usb/mtu3/mtu3_qmu.h
Makefile +1 -0
index 28c9f31fb4..6c3a953fdb 100644
@@ -795,6 +795,7 @@ libs-y += drivers/usb/eth/
 libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
 libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
 libs-y += drivers/usb/host/
+libs-y += drivers/usb/mtu3/
 libs-y += drivers/usb/musb/
 libs-y += drivers/usb/musb-new/
 libs-y += drivers/usb/phy/
drivers/usb/Kconfig +2 -0
index 34881a12b8..fedc0134f5 100644
@@ -72,6 +72,8 @@ source "drivers/usb/cdns3/Kconfig"
 
 source "drivers/usb/dwc3/Kconfig"
 
+source "drivers/usb/mtu3/Kconfig"
+
 source "drivers/usb/musb/Kconfig"
 
 source "drivers/usb/musb-new/Kconfig"
drivers/usb/mtu3/Kconfig new file +44 -0

44 lines not on this page · raw message

drivers/usb/mtu3/Makefile new file +11 -0
new file mode 100644
index 0000000000..234f3a380a
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+
+ccflags-$(CONFIG_USB_MTU3_DEBUG)	+= -DDEBUG
+
+obj-$(CONFIG_USB_MTU3)	+= mtu3.o
+
+mtu3-y	:= mtu3_plat.o
+
+obj-$(CONFIG_USB_MTU3_GADGET)	+= mtu3_core.o mtu3_gadget_ep0.o mtu3_gadget.o
+obj-$(CONFIG_USB_MTU3_GADGET)	+= mtu3_qmu.o
+obj-$(CONFIG_USB_MTU3_HOST)	+= mtu3_host.o
drivers/usb/mtu3/mtu3.h new file +423 -0

423 lines not on this page · raw message

drivers/usb/mtu3/mtu3_core.c new file +838 -0

838 lines not on this page · raw message

drivers/usb/mtu3/mtu3_dr.h new file +52 -0

52 lines not on this page · raw message

drivers/usb/mtu3/mtu3_gadget.c new file +686 -0

686 lines not on this page · raw message

drivers/usb/mtu3/mtu3_gadget_ep0.c new file +933 -0

931 lines not on this page · raw message

drivers/usb/mtu3/mtu3_host.c new file +141 -0

141 lines not on this page · raw message

drivers/usb/mtu3/mtu3_hw_regs.h new file +515 -0

515 lines not on this page · raw message

drivers/usb/mtu3/mtu3_plat.c new file +368 -0

368 lines not on this page · raw message

drivers/usb/mtu3/mtu3_qmu.c new file +504 -0

504 lines not on this page · raw message

drivers/usb/mtu3/mtu3_qmu.h new file +37 -0
new file mode 100644
index 0000000000..ba8a3aa309

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.18.0

Part of the diff is not shown here. View the raw message.

Applied
#1 lore raw

PATCH v10 1/1 usb: add MediaTek USB3 DRD driver

Quoted 3 lines · Chunfeng Yun

This patch adds support for the MediaTek USB3 DRD controller, its host side is based on xHCI, this driver supports device mode and host mode.

Applied, thanks.

author maintainer
#3 lore raw

PATCH v10 1/1 usb: add MediaTek USB3 DRD driver

Quoted 7 lines · Marek Vasut
Quoted 3 lines · Chunfeng Yun

This patch adds support for the MediaTek USB3 DRD controller, its host side is based on xHCI, this driver supports device mode and host mode.

Build failed, please fix:
https://gitlab.denx.de/u-boot/custodians/u-boot-usb/-/pipelines/5012

Ok, will fix the build warning, thanks