usb: add MediaTek USB3 DRD driver
Subsystems (3)
Chunfeng Yun
maintainerPATCH v10 1/1 usb: add MediaTek USB3 DRD driver
This patch adds support for the MediaTek USB3 DRD controller, its host side is based on xHCI, this driver supports device mode and host mode.
---
v10: no changes, but rebase on u-boot-usb/next
v9:
1. replace tab by space for macro in mtu3.h suggested by Marek
2. add Acked-by Bin
v8: Simplify Kconfig suggested by Bin
v7: use xhci quirk flag XHCI_MTK_HOST
v6: no changes
v5: change condition of readl_poll_timeout() when check clocks
v4:
1. remove unused member @busy and @wedged, use their flags instead
2. support force_vbus mode
3. add a glue driver using UCLASS_NOP
4. add host driver, and rebuild host flow
v3 changes
1. add ->udc_set_speed()
2. simplify some code flow
v2: simplify QMU operations
--- Makefile | 1 + drivers/usb/Kconfig | 2 + drivers/usb/mtu3/Kconfig | 44 ++ drivers/usb/mtu3/Makefile | 11 + drivers/usb/mtu3/mtu3.h | 423 +++++++++++++ drivers/usb/mtu3/mtu3_core.c | 838 ++++++++++++++++++++++++++ drivers/usb/mtu3/mtu3_dr.h | 52 ++ drivers/usb/mtu3/mtu3_gadget.c | 686 +++++++++++++++++++++ drivers/usb/mtu3/mtu3_gadget_ep0.c | 933 +++++++++++++++++++++++++++++ drivers/usb/mtu3/mtu3_host.c | 141 +++++ drivers/usb/mtu3/mtu3_hw_regs.h | 515 ++++++++++++++++ drivers/usb/mtu3/mtu3_plat.c | 368 ++++++++++++ drivers/usb/mtu3/mtu3_qmu.c | 504 ++++++++++++++++ drivers/usb/mtu3/mtu3_qmu.h | 37 ++ 14 files changed, 4555 insertions(+) create mode 100644 drivers/usb/mtu3/Kconfig create mode 100644 drivers/usb/mtu3/Makefile create mode 100644 drivers/usb/mtu3/mtu3.h create mode 100644 drivers/usb/mtu3/mtu3_core.c create mode 100644 drivers/usb/mtu3/mtu3_dr.h create mode 100644 drivers/usb/mtu3/mtu3_gadget.c create mode 100644 drivers/usb/mtu3/mtu3_gadget_ep0.c create mode 100644 drivers/usb/mtu3/mtu3_host.c create mode 100644 drivers/usb/mtu3/mtu3_hw_regs.h create mode 100644 drivers/usb/mtu3/mtu3_plat.c create mode 100644 drivers/usb/mtu3/mtu3_qmu.c create mode 100644 drivers/usb/mtu3/mtu3_qmu.h
Makefile +1 -0
@@ -795,6 +795,7 @@ libs-y += drivers/usb/eth/ libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/ libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/ libs-y += drivers/usb/host/ +libs-y += drivers/usb/mtu3/ libs-y += drivers/usb/musb/ libs-y += drivers/usb/musb-new/ libs-y += drivers/usb/phy/
drivers/usb/Kconfig +2 -0
@@ -72,6 +72,8 @@ source "drivers/usb/cdns3/Kconfig" source "drivers/usb/dwc3/Kconfig" +source "drivers/usb/mtu3/Kconfig" + source "drivers/usb/musb/Kconfig" source "drivers/usb/musb-new/Kconfig"
drivers/usb/mtu3/Kconfig new file +44 -0
44 lines not on this page · raw message
drivers/usb/mtu3/Makefile new file +11 -0
@@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0 + +ccflags-$(CONFIG_USB_MTU3_DEBUG) += -DDEBUG + +obj-$(CONFIG_USB_MTU3) += mtu3.o + +mtu3-y := mtu3_plat.o + +obj-$(CONFIG_USB_MTU3_GADGET) += mtu3_core.o mtu3_gadget_ep0.o mtu3_gadget.o +obj-$(CONFIG_USB_MTU3_GADGET) += mtu3_qmu.o +obj-$(CONFIG_USB_MTU3_HOST) += mtu3_host.o
drivers/usb/mtu3/mtu3.h new file +423 -0
423 lines not on this page · raw message
drivers/usb/mtu3/mtu3_core.c new file +838 -0
838 lines not on this page · raw message
drivers/usb/mtu3/mtu3_dr.h new file +52 -0
52 lines not on this page · raw message
drivers/usb/mtu3/mtu3_gadget.c new file +686 -0
686 lines not on this page · raw message
drivers/usb/mtu3/mtu3_gadget_ep0.c new file +933 -0
931 lines not on this page · raw message
drivers/usb/mtu3/mtu3_host.c new file +141 -0
141 lines not on this page · raw message
drivers/usb/mtu3/mtu3_hw_regs.h new file +515 -0
515 lines not on this page · raw message
drivers/usb/mtu3/mtu3_plat.c new file +368 -0
368 lines not on this page · raw message
drivers/usb/mtu3/mtu3_qmu.c new file +504 -0
504 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.18.0
Part of the diff is not shown here. View the raw message.
Marek Vasut
AppliedPATCH v10 1/1 usb: add MediaTek USB3 DRD driver
Quoted 3 lines · Chunfeng Yun
This patch adds support for the MediaTek USB3 DRD controller, its host side is based on xHCI, this driver supports device mode and host mode.
Applied, thanks.
PATCH v10 1/1 usb: add MediaTek USB3 DRD driver
In reply to Chunfeng YunQuoted 3 lines · Chunfeng Yun
This patch adds support for the MediaTek USB3 DRD controller, its host side is based on xHCI, this driver supports device mode and host mode.
Build failed, please fix:
https://gitlab.denx.de/u-boot/custodians/u-boot-usb/-/pipelines/5012
Chunfeng Yun
maintainerPATCH v10 1/1 usb: add MediaTek USB3 DRD driver
Quoted 7 lines · Marek Vasut
Quoted 3 lines · Chunfeng Yun
This patch adds support for the MediaTek USB3 DRD controller, its host side is based on xHCI, this driver supports device mode and host mode.
Build failed, please fix:
https://gitlab.denx.de/u-boot/custodians/u-boot-usb/-/pipelines/5012
Ok, will fix the build warning, thanks