Skip to contentSkip to conversation

regulator: dt-bindings: Add PMX55 compatibles

PATCH Applied Vinod Koul 4 participants 6 messages Nov 26, 2020 – Dec 29, 2020

Subsystems (3)
lore
Share & tools
lore

Vinod Koul

author
#0 lore raw

PATCH 1/2 regulator: dt-bindings: Add PMX55 compatibles

Add PMX55 compatibles for PMIC found in SDX55 platform

---
 .../devicetree/bindings/regulator/qcom,rpmh-regulator.txt       | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +2 -0
index 97c3e0b7611c..bae558b87686 100644
@@ -30,6 +30,7 @@ Supported regulator node names:
 	PMI8998:	bob
 	PM6150:         smps1 - smps5, ldo1 - ldo19
 	PM6150L:        smps1 - smps8, ldo1 - ldo11, bob
+	PMX55:		smps1 - smps7, ldo1 - ldo16
 
 ========================
 First Level Nodes - PMIC
@@ -47,6 +48,7 @@ First Level Nodes - PMIC
 		    "qcom,pmi8998-rpmh-regulators"
 		    "qcom,pm6150-rpmh-regulators"
 		    "qcom,pm6150l-rpmh-regulators"
+		    "qcom,pmx55-rpmh-regulators"
 
 - qcom,pmic-id
 	Usage:      required
Signature · 1 line
2.26.2
author
#1 lore raw

PATCH 2/2 regulator: qcom-rpmh: Add support for SDX55

Add support from RPMH regulators found in SDX55 platform

---
 drivers/regulator/qcom-rpmh-regulator.c | 31 +++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
drivers/regulator/qcom-rpmh-regulator.c +31 -0
index d488325499a9..e673d48b31a1 100644
@@ -930,6 +930,33 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
 	{},
 };
 
+static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
+	RPMH_VREG("smps1",   "smp%s1",    &pmic5_ftsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",   "smp%s2",    &pmic5_hfsmps510, "vdd-s2"),
+	RPMH_VREG("smps3",   "smp%s3",    &pmic5_hfsmps510, "vdd-s3"),
+	RPMH_VREG("smps4",   "smp%s4",    &pmic5_hfsmps510, "vdd-s4"),
+	RPMH_VREG("smps5",   "smp%s5",    &pmic5_hfsmps510, "vdd-s5"),
+	RPMH_VREG("smps6",   "smp%s6",    &pmic5_ftsmps510, "vdd-s6"),
+	RPMH_VREG("smps7",   "smp%s7",    &pmic5_hfsmps510, "vdd-s7"),
+	RPMH_VREG("ldo1",    "ldo%s1",    &pmic5_nldo,      "vdd-l1-l2"),
+	RPMH_VREG("ldo2",    "ldo%s2",    &pmic5_nldo,      "vdd-l1-l2"),
+	RPMH_VREG("ldo3",    "ldo%s3",    &pmic5_nldo,      "vdd-l3-l9"),
+	RPMH_VREG("ldo4",    "ldo%s4",    &pmic5_nldo,      "vdd-l4-l12"),
+	RPMH_VREG("ldo5",    "ldo%s5",    &pmic5_pldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo6",    "ldo%s6",    &pmic5_pldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo7",    "ldo%s7",    &pmic5_nldo,      "vdd-l7-l8"),
+	RPMH_VREG("ldo8",    "ldo%s8",    &pmic5_nldo,      "vdd-l7-l8"),
+	RPMH_VREG("ldo9",    "ldo%s9",    &pmic5_nldo,      "vdd-l3-l9"),
+	RPMH_VREG("ldo10",   "ldo%s10",   &pmic5_pldo,      "vdd-l10-l11-l13"),
+	RPMH_VREG("ldo11",   "ldo%s11",   &pmic5_pldo,      "vdd-l10-l11-l13"),
+	RPMH_VREG("ldo12",   "ldo%s12",   &pmic5_nldo,      "vdd-l4-l12"),
+	RPMH_VREG("ldo13",   "ldo%s13",   &pmic5_pldo,      "vdd-l10-l11-l13"),
+	RPMH_VREG("ldo14",   "ldo%s14",   &pmic5_nldo,      "vdd-l14"),
+	RPMH_VREG("ldo15",   "ldo%s15",   &pmic5_nldo,      "vdd-l15"),
+	RPMH_VREG("ldo16",   "ldo%s16",   &pmic5_pldo,      "vdd-l16"),
+	{},
+};
+
 static int rpmh_regulator_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1000,6 +1027,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pm6150l-rpmh-regulators",
 		.data = pm6150l_vreg_data,
 	},
+	{
+		.compatible = "qcom,pmx55-rpmh-regulators",
+		.data = pmx55_vreg_data,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
Signature · 1 line
2.26.2
Acked-by on v1 2/2
#2 lore raw

Re: [PATCH 2/2] regulator: qcom-rpmh: Add support for SDX55

Quoted 3 lines · Vinod Koul

Add support from RPMH regulators found in SDX55 platform

Quoted 56 lines
---
 drivers/regulator/qcom-rpmh-regulator.c | 31 +++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
drivers/regulator/qcom-rpmh-regulator.c +31 -0
index d488325499a9..e673d48b31a1 100644
@@ -930,6 +930,33 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
 	{},
 };
 
+static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
+	RPMH_VREG("smps1",   "smp%s1",    &pmic5_ftsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",   "smp%s2",    &pmic5_hfsmps510, "vdd-s2"),
+	RPMH_VREG("smps3",   "smp%s3",    &pmic5_hfsmps510, "vdd-s3"),
+	RPMH_VREG("smps4",   "smp%s4",    &pmic5_hfsmps510, "vdd-s4"),
+	RPMH_VREG("smps5",   "smp%s5",    &pmic5_hfsmps510, "vdd-s5"),
+	RPMH_VREG("smps6",   "smp%s6",    &pmic5_ftsmps510, "vdd-s6"),
+	RPMH_VREG("smps7",   "smp%s7",    &pmic5_hfsmps510, "vdd-s7"),
+	RPMH_VREG("ldo1",    "ldo%s1",    &pmic5_nldo,      "vdd-l1-l2"),
+	RPMH_VREG("ldo2",    "ldo%s2",    &pmic5_nldo,      "vdd-l1-l2"),
+	RPMH_VREG("ldo3",    "ldo%s3",    &pmic5_nldo,      "vdd-l3-l9"),
+	RPMH_VREG("ldo4",    "ldo%s4",    &pmic5_nldo,      "vdd-l4-l12"),
+	RPMH_VREG("ldo5",    "ldo%s5",    &pmic5_pldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo6",    "ldo%s6",    &pmic5_pldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo7",    "ldo%s7",    &pmic5_nldo,      "vdd-l7-l8"),
+	RPMH_VREG("ldo8",    "ldo%s8",    &pmic5_nldo,      "vdd-l7-l8"),
+	RPMH_VREG("ldo9",    "ldo%s9",    &pmic5_nldo,      "vdd-l3-l9"),
+	RPMH_VREG("ldo10",   "ldo%s10",   &pmic5_pldo,      "vdd-l10-l11-l13"),
+	RPMH_VREG("ldo11",   "ldo%s11",   &pmic5_pldo,      "vdd-l10-l11-l13"),
+	RPMH_VREG("ldo12",   "ldo%s12",   &pmic5_nldo,      "vdd-l4-l12"),
+	RPMH_VREG("ldo13",   "ldo%s13",   &pmic5_pldo,      "vdd-l10-l11-l13"),
+	RPMH_VREG("ldo14",   "ldo%s14",   &pmic5_nldo,      "vdd-l14"),
+	RPMH_VREG("ldo15",   "ldo%s15",   &pmic5_nldo,      "vdd-l15"),
+	RPMH_VREG("ldo16",   "ldo%s16",   &pmic5_pldo,      "vdd-l16"),
+	{},
+};
+
 static int rpmh_regulator_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1000,6 +1027,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pm6150l-rpmh-regulators",
 		.data = pm6150l_vreg_data,
 	},
+	{
+		.compatible = "qcom,pmx55-rpmh-regulators",
+		.data = pmx55_vreg_data,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
Signature · 1 line
2.26.2
Reviewed-by on v1 1/2
#3 lore raw
In reply to Vinod Koul
Quoted 3 lines · Vinod Koul

Add PMX55 compatibles for PMIC found in SDX55 platform

Quoted 27 lines
---
 .../devicetree/bindings/regulator/qcom,rpmh-regulator.txt       | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +2 -0
index 97c3e0b7611c..bae558b87686 100644
@@ -30,6 +30,7 @@ Supported regulator node names:
 	PMI8998:	bob
 	PM6150:         smps1 - smps5, ldo1 - ldo19
 	PM6150L:        smps1 - smps8, ldo1 - ldo11, bob
+	PMX55:		smps1 - smps7, ldo1 - ldo16
 
 ========================
 First Level Nodes - PMIC
@@ -47,6 +48,7 @@ First Level Nodes - PMIC
 		    "qcom,pmi8998-rpmh-regulators"
 		    "qcom,pm6150-rpmh-regulators"
 		    "qcom,pm6150l-rpmh-regulators"
+		    "qcom,pmx55-rpmh-regulators"
 
 - qcom,pmic-id
 	Usage:      required
Signature · 1 line
2.26.2
maintainer
#4 lore raw
In reply to Vinod Koul
Quoted 1 line · Vinod Koul

Add PMX55 compatibles for PMIC found in SDX55 platform

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/2] regulator: dt-bindings: Add PMX55 compatibles

      commit: 1008521b9b4f85d80ac1d80391ac39055c89f736
[2/2] regulator: qcom-rpmh: Add support for SDX55
      commit: 36dd70ceb4d955e6cd3ecd18e78169141aaa23b7

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

#5 lore raw
In reply to Vinod Koul
This series was applied to qcom/linux.git (refs/heads/for-next):

Hello:

This series was applied to qcom/linux.git (refs/heads/for-next):

Quoted 6 lines · On Thu, 26 Nov 2020 15:00:17 +0530 you wrote:

Add PMX55 compatibles for PMIC found in SDX55 platform

---
 .../devicetree/bindings/regulator/qcom,rpmh-regulator.txt       | 2 ++
 1 file changed, 2 insertions(+)

Here is the summary with links:
- [1/2] regulator: dt-bindings: Add PMX55 compatibles

    https://git.kernel.org/qcom/c/1008521b9b4f
  - [2/2] regulator: qcom-rpmh: Add support for SDX55
    https://git.kernel.org/qcom/c/36dd70ceb4d9

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html