regulator: dt-bindings: Add PMX55 compatibles
Subsystems (3)
PATCH 1/2 regulator: dt-bindings: Add PMX55 compatibles
Add PMX55 compatibles for PMIC found in SDX55 platform
--- .../devicetree/bindings/regulator/qcom,rpmh-regulator.txt | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +2 -0
@@ -30,6 +30,7 @@ Supported regulator node names: PMI8998: bob PM6150: smps1 - smps5, ldo1 - ldo19 PM6150L: smps1 - smps8, ldo1 - ldo11, bob + PMX55: smps1 - smps7, ldo1 - ldo16 ======================== First Level Nodes - PMIC
@@ -47,6 +48,7 @@ First Level Nodes - PMIC "qcom,pmi8998-rpmh-regulators" "qcom,pm6150-rpmh-regulators" "qcom,pm6150l-rpmh-regulators" + "qcom,pmx55-rpmh-regulators" - qcom,pmic-id Usage: required
Signature · 1 line
2.26.2
PATCH 2/2 regulator: qcom-rpmh: Add support for SDX55
Add support from RPMH regulators found in SDX55 platform
--- drivers/regulator/qcom-rpmh-regulator.c | 31 +++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
drivers/regulator/qcom-rpmh-regulator.c +31 -0
@@ -930,6 +930,33 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = { {}, }; +static const struct rpmh_vreg_init_data pmx55_vreg_data[] = { +RPMH_VREG ("smps1" ,"smp%s1" , &pmic5_ftsmps510,"vdd-s1" ), +RPMH_VREG ("smps2" ,"smp%s2" , &pmic5_hfsmps510,"vdd-s2" ), +RPMH_VREG ("smps3" ,"smp%s3" , &pmic5_hfsmps510,"vdd-s3" ), +RPMH_VREG ("smps4" ,"smp%s4" , &pmic5_hfsmps510,"vdd-s4" ), +RPMH_VREG ("smps5" ,"smp%s5" , &pmic5_hfsmps510,"vdd-s5" ), +RPMH_VREG ("smps6" ,"smp%s6" , &pmic5_ftsmps510,"vdd-s6" ), +RPMH_VREG ("smps7" ,"smp%s7" , &pmic5_hfsmps510,"vdd-s7" ), +RPMH_VREG ("ldo1" ,"ldo%s1" , &pmic5_nldo,"vdd-l1-l2" ), +RPMH_VREG ("ldo2" ,"ldo%s2" , &pmic5_nldo,"vdd-l1-l2" ), +RPMH_VREG ("ldo3" ,"ldo%s3" , &pmic5_nldo,"vdd-l3-l9" ), +RPMH_VREG ("ldo4" ,"ldo%s4" , &pmic5_nldo,"vdd-l4-l12" ), +RPMH_VREG ("ldo5" ,"ldo%s5" , &pmic5_pldo,"vdd-l5-l6" ), +RPMH_VREG ("ldo6" ,"ldo%s6" , &pmic5_pldo,"vdd-l5-l6" ), +RPMH_VREG ("ldo7" ,"ldo%s7" , &pmic5_nldo,"vdd-l7-l8" ), +RPMH_VREG ("ldo8" ,"ldo%s8" , &pmic5_nldo,"vdd-l7-l8" ), +RPMH_VREG ("ldo9" ,"ldo%s9" , &pmic5_nldo,"vdd-l3-l9" ), +RPMH_VREG ("ldo10" ,"ldo%s10" , &pmic5_pldo,"vdd-l10-l11-l13" ), +RPMH_VREG ("ldo11" ,"ldo%s11" , &pmic5_pldo,"vdd-l10-l11-l13" ), +RPMH_VREG ("ldo12" ,"ldo%s12" , &pmic5_nldo,"vdd-l4-l12" ), +RPMH_VREG ("ldo13" ,"ldo%s13" , &pmic5_pldo,"vdd-l10-l11-l13" ), +RPMH_VREG ("ldo14" ,"ldo%s14" , &pmic5_nldo,"vdd-l14" ), +RPMH_VREG ("ldo15" ,"ldo%s15" , &pmic5_nldo,"vdd-l15" ), +RPMH_VREG ("ldo16" ,"ldo%s16" , &pmic5_pldo,"vdd-l16" ), + {}, +}; +static int rpmh_regulator_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev;
@@ -1000,6 +1027,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = { .compatible = "qcom,pm6150l-rpmh-regulators", .data = pm6150l_vreg_data, }, + { + .compatible = "qcom,pmx55-rpmh-regulators", + .data = pmx55_vreg_data, + }, {} };MODULE_DEVICE_TABLE (of, rpmh_regulator_match_table);
Signature · 1 line
2.26.2
Re: [PATCH 2/2] regulator: qcom-rpmh: Add support for SDX55
Quoted 3 lines · Vinod Koul
Add support from RPMH regulators found in SDX55 platform
Signed-off-by Vinod Koul <[email protected]>
Quoted 56 lines
--- drivers/regulator/qcom-rpmh-regulator.c | 31 +++++++++++++++++++++++++ 1 file changed, 31 insertions(+)drivers/regulator/qcom-rpmh-regulator.c +31
-0@@ -930,6 +930,33 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = { {}, }; +static const struct rpmh_vreg_init_data pmx55_vreg_data[] = { +RPMH_VREG ("smps1" ,"smp%s1" , &pmic5_ftsmps510,"vdd-s1" ), +RPMH_VREG ("smps2" ,"smp%s2" , &pmic5_hfsmps510,"vdd-s2" ), +RPMH_VREG ("smps3" ,"smp%s3" , &pmic5_hfsmps510,"vdd-s3" ), +RPMH_VREG ("smps4" ,"smp%s4" , &pmic5_hfsmps510,"vdd-s4" ), +RPMH_VREG ("smps5" ,"smp%s5" , &pmic5_hfsmps510,"vdd-s5" ), +RPMH_VREG ("smps6" ,"smp%s6" , &pmic5_ftsmps510,"vdd-s6" ), +RPMH_VREG ("smps7" ,"smp%s7" , &pmic5_hfsmps510,"vdd-s7" ), +RPMH_VREG ("ldo1" ,"ldo%s1" , &pmic5_nldo,"vdd-l1-l2" ), +RPMH_VREG ("ldo2" ,"ldo%s2" , &pmic5_nldo,"vdd-l1-l2" ), +RPMH_VREG ("ldo3" ,"ldo%s3" , &pmic5_nldo,"vdd-l3-l9" ), +RPMH_VREG ("ldo4" ,"ldo%s4" , &pmic5_nldo,"vdd-l4-l12" ), +RPMH_VREG ("ldo5" ,"ldo%s5" , &pmic5_pldo,"vdd-l5-l6" ), +RPMH_VREG ("ldo6" ,"ldo%s6" , &pmic5_pldo,"vdd-l5-l6" ), +RPMH_VREG ("ldo7" ,"ldo%s7" , &pmic5_nldo,"vdd-l7-l8" ), +RPMH_VREG ("ldo8" ,"ldo%s8" , &pmic5_nldo,"vdd-l7-l8" ), +RPMH_VREG ("ldo9" ,"ldo%s9" , &pmic5_nldo,"vdd-l3-l9" ), +RPMH_VREG ("ldo10" ,"ldo%s10" , &pmic5_pldo,"vdd-l10-l11-l13" ), +RPMH_VREG ("ldo11" ,"ldo%s11" , &pmic5_pldo,"vdd-l10-l11-l13" ), +RPMH_VREG ("ldo12" ,"ldo%s12" , &pmic5_nldo,"vdd-l4-l12" ), +RPMH_VREG ("ldo13" ,"ldo%s13" , &pmic5_pldo,"vdd-l10-l11-l13" ), +RPMH_VREG ("ldo14" ,"ldo%s14" , &pmic5_nldo,"vdd-l14" ), +RPMH_VREG ("ldo15" ,"ldo%s15" , &pmic5_nldo,"vdd-l15" ), +RPMH_VREG ("ldo16" ,"ldo%s16" , &pmic5_pldo,"vdd-l16" ), + {}, +}; +static int rpmh_regulator_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev;@@ -1000,6 +1027,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = { .compatible = "qcom,pm6150l-rpmh-regulators", .data = pm6150l_vreg_data, }, + { + .compatible = "qcom,pmx55-rpmh-regulators", + .data = pmx55_vreg_data, + }, {} };MODULE_DEVICE_TABLE (of, rpmh_regulator_match_table);Signature · 1 line
2.26.2
Quoted 3 lines · Vinod Koul
Add PMX55 compatibles for PMIC found in SDX55 platform
Signed-off-by Vinod Koul <[email protected]>
Quoted 27 lines
--- .../devicetree/bindings/regulator/qcom,rpmh-regulator.txt | 2 ++ 1 file changed, 2 insertions(+)Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +2
-0@@ -30,6 +30,7 @@ Supported regulator node names: PMI8998: bob PM6150: smps1 - smps5, ldo1 - ldo19 PM6150L: smps1 - smps8, ldo1 - ldo11, bob + PMX55: smps1 - smps7, ldo1 - ldo16 ======================== First Level Nodes - PMIC@@ -47,6 +48,7 @@ First Level Nodes - PMIC "qcom,pmi8998-rpmh-regulators" "qcom,pm6150-rpmh-regulators" "qcom,pm6150l-rpmh-regulators" + "qcom,pmx55-rpmh-regulators" - qcom,pmic-id Usage: requiredSignature · 1 line
2.26.2
Mark Brown
maintainerQuoted 1 line · Vinod Koul
Add PMX55 compatibles for PMIC found in SDX55 platform
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/2] regulator: dt-bindings: Add PMX55 compatibles
commit: 1008521b9b4f85d80ac1d80391ac39055c89f736
[2/2] regulator: qcom-rpmh: Add support for SDX55
commit: 36dd70ceb4d955e6cd3ecd18e78169141aaa23b7All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
This series was applied to qcom/linux.git (refs/heads/for-next):
Hello:
This series was applied to qcom/linux.git (refs/heads/for-next):
Quoted 6 lines · On Thu, 26 Nov 2020 15:00:17 +0530 you wrote:
Add PMX55 compatibles for PMIC found in SDX55 platform
Signed-off-by Vinod Koul <[email protected]>--- .../devicetree/bindings/regulator/qcom,rpmh-regulator.txt | 2 ++ 1 file changed, 2 insertions(+)
Here is the summary with links:
- [1/2] regulator: dt-bindings: Add PMX55 compatibles
https://git.kernel.org/qcom/c/1008521b9b4f - [2/2] regulator: qcom-rpmh: Add support for SDX55 https://git.kernel.org/qcom/c/36dd70ceb4d9
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html